Hydrothermal liquefaction accelerates the toxicity and solubility of arsenic in biowaste

Sustainable Biomass Acts as an Electron Donor for Cr(VI) Reduction during the Subcritical Hydrothermal Process: Molecular Insights into the Role of Hydrochar and Liquid Compounds

Heavy metal pollution is a critical environmental issue that has garnered significant attention from the international community. Subcritical hydrothermal liquefaction (HTL) as an emerging green technology has demonstrated remarkable promise in environmental remediation. However, there is limited research on the remediation of highly toxic Cr(VI) using HTL. This study reveals that the HTL reaction of biomass enables the simultaneous reduction and precipitation of Cr(VI). At 280 °C, the reduction of Cr(VI) was nearly complete, with a high reduction rate of 98.9%. The reduced Cr as Cr(OH)3 and Cr2O3 was primarily enriched in hydrochar, accounting for over 99.9% of the total amount. This effective enrichment resulted in the removal of Cr(VI) from the aqueous phase while simultaneously yielding clean liquid compounds like organic acids and furfural. Furthermore, the elevated temperature facilitated the formation of Cr(III) and enhanced its accumulation within hydrochar. Notably, the resulting hydrochar and small oxygenated compounds, especially aldehyde, served as electron donors for Cr(VI) reduction. Additionally, the dissolved Cr facilitated the depolymerization and deoxygenation processes of macromolecular compounds with lignin-like structures, leading to more small oxygenated compounds and subsequently influencing Cr(VI) reduction. These findings have substantial implications for green and sustainable development.

Aquatic life criteria of hydrothermal liquefaction wastewater via ecotoxicity test and modeling

Wastewater resulting from hydrothermal liquefaction (HTL-AP) of biowaste is gaining attention as an emerging hazardous material. However, there is a lack of specific and systematic ecotoxicity studies on HTL-AP. This study addresses this gap by conducting acute toxicity tests on HTL-AP using typical aquatic species and integrating these results with predicted toxicity values from interspecies correlation estimation models to establish aquatic life criteria. HTL-AP exhibited significant toxicity with LC50 of 956.12-3645.4 mg/L, but demonstrated moderate toxicity compared to common freshwater pollutants like commercial microbicides, personal care products, and insect repellents. The resulting hazardous concentration for 5 % of species (HC5), the criterion maximum concentration, and the short-term water quality criteria for aquatic were 506.0, 253.0, and 168.7 mg/L, respectively. Notably, certain organisms like Misgurnus anguillicaudatus and Cipangopaludina chinensis showed high tolerance to HTL-AP, likely due to their metabolic capabilities on HTL-AP components. The significant decrease in HC5 values for some HTL-AP substances compared to pure compounds could indicate the synergistic inhibition effects among HTL-AP compositions. Furthermore, according to the established criteria, HTL-AP required significantly less diluted water (13 t) than carbendazim (1009 t) to achieve biosafety, indicating a safer release. This research establishes a preliminary water quality criterion for HTL-AP, offering a valuable reference for risk assessment and prediction in the utilization of HTL-AP within environmental contexts.

Hydrothermal liquefaction of municipal sludge and its products applications

Hydrothermal liquefaction (HTL) is an effective medium-temperature, high-pressure thermochemical process to dispose municipal sludge (MS), and biocrude (a crude bio-oil) is its main product. Many efforts are continued extensively to improve conversion efficiency and to promote industrial application of this technology. This work focuses on critical influencing factors (e.g., reaction temperature, residence time, atmosphere, solvent, catalyst, and pretreatment) and fundamental transformation mechanisms of main components (i.e., lipids, proteins, and carbohydrates) in MS HTL. It also analyzes migration behavior of heavy metals during MS HTL, which can provide a reference for subsequent recovery of nutrients from HTL products. Moreover, the applications of MS HTL products are systematically expounded, and potential challenges and opportunities are highlighted as well. It is necessary to develop advanced methods of catalyst recovery and innovative biocrude upgrading methods so as to reduce HTL investment and operating costs. Reusing aqueous phase and solid phase products as reaction medium and catalyst carrier separately after MS HTL is feasible to realize resource utilization of MS. This information can provide valuable guidance to promote MS HTL industrialization.

Heavy metal concentration according to shrimp species and organ specificity: Monitoring and human risk assessment

This study assessed heavy metal levels (lead (Pb), cadmium (Cd), total arsenic (tAs), arsenite (As (III)), arsenate (As (V)), monomethyl arsenic acid (MMA), dimethylarsinic acid (DMA), total mercury (tHg), and methylmercury (MeHg)) in six organs (total portion, head, body, shell, muscle, and intestine) of 11 shrimp species distributed in Korea. Shrimp exhibited significant variability in heavy metal accumulation, with Alaskan pink and dried shrimp (Lesser glass, Southern rough, and Chinese ditch prawn) showing the highest metal concentrations. Notably, the intestine having the highest overall metal content, while Cd was most prominent in the head, tHg was highest in the muscle. The Hazard Quotient values of 11 shrimp species in South Korea were below the European Food Safety Authority's allowable limits for heavy metals. This study illuminates the heavy metal profiles of distributed shrimp in Korea and emphasizes the ongoing need for monitoring heavy metals on seafood to ensure consumer safety.

Assessing indicators of arsenic toxicity using variable fluorescence in a commercially valuable microalgae: Physiological and toxicological aspects

Indicators signaling Arsenic (As) stress through physiology of microalgae using non-destructive methods like variable fluorescence are rare but requisite. This study reports stress markers indicating arsenic (As) toxicity (in two concentrations 11.25 µg/L and 22.5 µg/L compared to a control) exposed to a microalga (Diacronema lutheri), using fast repetition rate fluorometry (FRRf). Growth and physiological parameters such as cell density, chl a and the maximum quantum yield F_v/F_m showed coherence and impeded after the exponential phase (day 9 - day 12) in As treatments compared to the control (p < 0.05). On contrary photo-physiological constants were elevated showing higher optical (a_LHII) and functional [Sigma (σ_PSII)] absorption cross-section for the As treatments (p < 0.05) further implying the lack of biomass production yet an increase in light absorption. In addition, As exposure increased the energy dissipation by heat (NPQ-NSV) showing a strong relationship with the de-epoxidation ratio (DR) involving photoprotective pigments. Total As bioaccumulation by D. lutheri showed a strong affinity with Fe adsorption throughout the algal growth curve. This study suggests some prompt photo-physiological proxies signaling As contamination and endorsing its usefulness in risk assessments, given the high toxicity and ubiquitous presence of As in the ecosystem.

Response surface optimization of product yields and biofuel quality during fast hydrothermal liquefaction of a highly CO2-tolerant microalgae

The effects of biochemical components and processing variables (e.g., temperatures, solid-liquid ratio, ethanol concentration, and time) during fast hydrothermal liquefaction of a highly CO₂-tolerant microalgae (Micractinium sp.) on the product yields and biofuel quality were explored using response surface methodology coupled with central composite design. Results showed that the maximum bio-oil yield (51.4 %) was obtained at 321 °C for 49 min at ethanol concentration of 75 % and solid-liquid ratio of 15.3 %. Among different studied parameters, ethanol concentration showed the highest significant impact on the bio-oil yield due to the low P-value and high F-value in ANOVA analysis. Furthermore, the chemical compositions of bio-oils were determined, which showed that the increase of ethanol concentration in the solvent not only increased the bio-oil yield but also promoted the bio-oil quality by reduction of carboxylic acids and nitrogen-containing compounds with simultaneous enhancement of esters in the bio-oil. The present results show that fast hydrothermal liquefaction is a promising approach to convert the microalgae into high quality biofuels rich in esters.

Research progress, trends, and future prospects on hydrothermal liquefaction of algae for biocrude production: a bibliometric analysis

The rising demand to settle a sustainable energy source is guiding researchers in the production of biofuels. The liquefaction process is an alternative to obtaining biocrude from different types of renewable biomass and can mitigate environmental impacts. All papers published since 2000, which are related to the hydrothermal liquefaction process that aims to obtain biocrude are analyzed in the present study using the bibliometric approach to provide the selected database. Furthermore, the use of algae biomass in the liquefaction was also a discussed topic considering its high relevance in the process. The focus of the present study was to evaluate the evolution of the current state of the art in these topics and also to indicate trends and courses that it might be taken in the future. The database used in the bibliometric analysis was taken from the Web of Science (WoS) and the papers were selected by two different search equations. With the selected data, the use of BibExcel, VOSviewer, and PowerBi software was useful to guide the discussion and to create graphics and visual networks. As shown in the results, it was noticeable the influence of China and the USA on the field, considering the high number of publications from these countries. Moreover, the main authors were indicated considering their citation numbers, publications, and local h-index factor. Based on the author's keywords, the most significant and recent topics on liquefaction were listed. Among them, technical-economic analysis, nutrient, and energy recovery, response surface methodology, and kinetic model are highlighted. This may indicate a new direction being taken by researchers besides the operational parameters' studies.

Graphical Abstract

Rethinking quantified methods for arsenic speciation and risk in a biowaste hydrothermal liquefaction system

Controversy exists to quantify the fate and speciation of Arsenic (As). We investigated its characteristics by As-containing algae in various pH hydrothermal liquefaction (HTL) system, specifically via two classical methods, i.e. the European Community Bureau of Reference (BCR) and Wenzel's method. Solid residue immobilized 11.23-16.55% of As, and 88.07-82.44% was in aqueous by the pH regulators (e.g., CH₃COOH, HCl, and KOH). ICP-MS and XRD analysis revealed that As (V) was converted into As (III) and As (0) in the solid residue, while the As (V) was mainly converted into As (III) in the aqueous phase during HTL. When the classified forms of As in solid residue are compared, Wenzel's method was more appropriate for dividing the bio-availability forms of As, whereas BCR was better for estimating the toxic-potential forms of As. Subsequently, pH regulators raised the risk of As in solid residue associated with the increasing of unstable forms. The amide was hydrolyzed to carboxylic acid with acidic additives, which weakened the reducing environment in the HTL process. In contrast, the amide was hydrolyzed to ammonia with the alkaline additives, which enhanced the reducing environment and increased the risk of As in products. This work provided a new insight in systematically evaluating the risk and speciation of As in HTL.

Recent progress on the phytotoxic effects of hydrochars and toxicity reduction approaches

Hydrothermal carbonization of wet biomasses has been known to produce added-value materials for a wide range of applications. From catalyst substrates, to biofuels and soil amendments, hydrochars have distinct advantages to offer compared to conventional materials. With respect to the agricultural application of hydrochars, both positive and negative results have been reported. The presence of N, P and K in certain hydrochars is appealing and may contribute to the reduction of chemical fertilizer application. However, regardless of biomass, hydrothermal carbonization results in the production of phytotoxic organic compounds. Additionally, hydrochars from sewage sludge often contain heavy metal concentrations which exceed the regulatory limits set for agricultural use. This review critically discusses the phytotoxic aspects of hydrochar and provides an account of the substances commonly responsible for these. Furthermore, phytotoxicity reduction approaches are proposed and compared with each other, in view of field-scale applications.

Thermochemical conversion of heavy metal contaminated biomass: Fate of the metals and their impact on products

With the rapid depletion of fossil energy and increasingly severe environmental pollution, the development of biomass resources for biorefineries has become a new research focus. However, heavy metals may be released during the thermochemical treatment when the biomass materials used in biomass conversion are contaminated by heavy metals. This can cause secondary environmental pollution or transference to the target products, reducing product quality. Therefore, having a systematic understanding of the fate of heavy metals in biomass conversion is necessary for alleviating potential risks. This study presents the current status of contaminated biomass and conversion products involving thermochemical processes, the migration, transformation, and impact of heavy metals in biomass conversion was investigated, and the utilization of heavy metals in contaminated biomass was briefly outlined. This review aims to link biomass conversion to the fate of heavy metals, avoid existing risks as much as possible to produce cleaner products efficiently, and promote the sustainable development of heavy metal contaminated biomass resources.

Elemental migration and transformation during hydrothermal liquefaction of biomass

Over the past few decades, energy and environmental crises have worsened due to the excessive consumption of fossil fuels. Hydrothermal liquefaction (HTL) is a promising technology for sustainable biocrude production from biomass. However, elemental migration and transformation during HTL of biomass have only received scant attention to date. Understanding the transformation mechanism is beneficial for downstream biocrude upgrading and by-products utilization for the future industrialization of HTL. In this paper, biomass is grouped into six categories: microalgae, macroalgae, lignocellulose, food waste, manure, and sludge. The biochemical composition and HTL product distribution of six kinds of biomass are compared. The conversion process of the biomacromolecules (including lipids, proteins, cellulose, hemicellulose, and lignin) and the interactions between them are also reported. Furthermore, the distribution of carbon, nitrogen, sulfur, and inorganic elements (Na, K, Ca, Mg, Al, Fe, Zn, Cu, Pb, Cd, etc.) in the HTL products is summarized, and the transformation of the organic and inorganic elements during HTL of biomass is explored. Finally, outlooks for the HTL of biomass are proposed.

Construct a novel anti-bacteria pool from hydrothermal liquefaction aqueous family

Hydrothermal liquefaction aqueous phase (HTL-AP) is complex and toxic, which severely hinders the scale-up of HTL technology. Distinguished from degrading organics and extracting chemical energy or nutrients from HTL-AP via biological fermentation or algae cultivation, here, we propose an innovative strategy to valorize the HTL-AP as a powerful anti-bacterial pool. Six model ingredients, i.e. lipids, cellulose, xylan, lignin, protein and the mixture were employed, to obtain a thirty-HTL-AP pool for characteristics database construction. We found that the xylan group at 230 °C on Escherichia coli (E. coli) and at 200 °C on Staphylococcus aureus (S. aureus) exhibited the highest anti-bacterial activities via plate experiments, nearly equal to 100 μg/ml streptomycin which far exceeded the working concentration of streptomycin (10-50 μg/ml). The liquid cultivation studies further revealed HTL-APs from the mixture feedstock, protein, real biomass microalgae and cornstalk had more stable anti-bacterial activities as chemically stable substances. Interestingly, the Gram-positive strain S. aureus was more susceptible than the Gram-negative E. coli on the HTL-APs, probably owing to the outer selectively permeable membrane difference and the strong reducibility and acidity of HTL-APs. This study provides a new vision to seek the anti-bacterial potential of HTL aqueous, supporting further investigations on its molecular mechanism and new bactericide development.