Simultaneous adsorption and oxidation of Sb(III) from water by the pH-sensitive superabsorbent polymer hydrogel incorporated with Fe-Mn binary oxides composite

Cellulose nanocrystal-based polymer hydrogel embedded with iron oxide nanorods for efficient arsenic removal

A cellulose nanocrystal (CNC) polymer hydrogel containing magnetic iron oxide nanorods (Fe3O4NRs) was prepared for As(III) removal in water. Systematic studies on the performance of these prepared CNC-based composite hydrogels for the removal of As(III) have been undertaken. The maximum adsorption capacity of the CNC-g-PAA/qP4VP (CPqP) hydrogel was 241.3 mg/g. After introduction of Fe3O4NRs in the hydrogel, the maximum adsorption capacity of the resulting Fe3O4NRs@CNC-g-PAA/qP4VP (FN@CPqP) hydrogel was further improved to 263.0 mg/g. The high adsorption performance can be attributed to the facts that the 3D interconnected porous network of the hydrogel allows As species to easily enter into the hydrogel, the quaternized P4VP chains provides more adsorption sites, Fe3O4NRs uniformly distributed in the internal cavity of the hydrogel significantly reduces the nanoparticle aggregation. The adsorption kinetics indicated that the adsorption of arsenic by the hydrogel was mainly chemisorption. The isotherm analysis revealed that the adsorption of arsenic by the hydrogel was principally monolayer adsorption on a homogeneous surface. Moreover, the as-prepared CNC-based polymer hydrogels exhibited good stability and reusability with negligible performance loss after five adsorption-desorption cycles. The novel FN@CPqP hydrogel demonstrates great potential as a cost-effective adsorbent for the removal of arsenic contaminants from wastewater.

Separable alginate gel spheres encapsulated with La-Fe modified biochar for efficient adsorption of Sb(III) with high capacity

Sb and its compounds have been widely used in various industrial applications. Therefore, the preparation of Sb adsorbents with easy recovery and excellent adsorption levels is an urgent problem that must be resolved. By calcining and treating La/Fe metal-organic frameworks (MOF) biochar as a precursor, a loaded La-Fe-modified water hyacinth biochar was synthesised and used as a filler to synthesise iron alginate composite gel spheres, MBC/algFe. Through a series of static adsorption experiments, the effects of different filler addition ratios, solution pH, reaction time, coexisting ions, and other factors on the adsorption of Sb(III) were investigated. According to the Langmuir model, the maximum adsorption capacity of MBC/algFe at 25 ℃ was 277.8 mg·g-1. The adsorption mechanism mainly involved hydrogen bonding and metal-organic complexation interactions.

Synergistic adsorption and oxidation of trivalent antimony from groundwater using biochar supported magnesium ferrite: Performances and mechanisms

Antimony (Sb) pollution is considered an environmental problem, since Sb is toxic and carcinogenic to humans. Here, a novel biochar supported magnesium ferrite (BC@MF) was adopted for Sb(III) removal from groundwater. The maximum adsorption capacity was 77.44 mg g^-1. Together with characterization, batch experiments, kinetics, isotherms, and thermodynamic analyses suggested that inner-sphere complexation, H-bonding, and electrostatic interactions were the primary mechanisms. C-C/CC, C-O, and O-CO groups and Fe/Mg oxides might have acted as adsorption sites. The adsorbed Sb(III) was oxidized to Sb(V). The generation of reactive oxygen species, iron redox reaction, and oxidizing functional groups all contributed to Sb(III) oxidation. Furthermore, the fixed-bed column system demonstrated a satisfactory Sb removal performance; BC@MF could treat ∼6060 BV of simulated Sb-polluted groundwater. This research provides a promising approach to sufficiently remove Sb(III) from contaminated groundwater, providing new insights for the development of innovative strategies for heavy metal removal.

Graphene oxide supported sulfidated nano zero-valent iron (S-nZVI@GO) for antimony removal: The role of active oxygen species and reaction mechanism

Sulfidated nano zero-valent iron (S-nZVI) was used to remove various pollutants from wastewater. However, the instability, poor dispersibility, and low electron transfer efficiency of S-nZVI limit its application. Herein, graphene oxide supported sulfidated nano zero-valent iron (S-nZVI@GO) was successfully synthesized using graphene oxide (GO) as a carrier. The properties of S-nZVI@GO were characterized by scanning electron microscopy coupled to X-ray photoelectron spectroscopy (SEM-EDS), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) concerning the surface morphology, crystalline structure, and elemental components. S-nZVI@GO displayed an excellent capacity for antimony (Sb) removal under aerobic conditions (96.7%), with a high adsorption capacity (Q_max = 311.75 mg/g). It maintained a high removal rate (over 90%) during a wide pH range (3-9). More importantly, S-nZVI@GO activated the molecular oxygen in water via a single-electron pathway to produce •O₂－ and H₂O₂, and then oxidized trivalent antimony (Sb(III)) to pentavalent antimony (Sb(V)) and further separated it by synergistic adsorption and co-precipitation. Therefore, S-nZVI@GO shows excellent potential for Sb contamination remediation.

Enhanced arsenic removal by reusable hexagonal CeO2/Fe2O3 nanosheets with exposed (0001) facet

Arsenite in wastewater has caused increasing concern because of high toxicity and mobility. Iron oxides are widely available and regarded as effective adsorbents for arsenic. However, conventional iron oxides usually are only effective for arsenate (As(V)) adsorption by complexation, but not for As(III) adsorption because of their poor catalytic oxidation activities, which greatly limits arsenic removal efficiency. In this study, a uniform hexagonal FeCe bimetal oxide nanosheets (Fe_0.21Ce_0.29O) enclosed by high active (0001) planes was synthesized by a solvothermal method to improve the catalytic activity of Fe₂O₃. The experimental results showed that adsorption capacity of Fe_0.21Ce_0.29O reached 61.1 mg/g for arsenic and 70 % of that at equilibrium was achieved in <10 min. Based on characterization analyses and density functional theory simulation, the new insight in oxidation and complexation mechanism of arsenic was proposed. Firstly, As(III) was adsorbed to adsorbent surface by forming stable structure of Ce-O-As or Fe-O-As, and then converted into As(V) by dissolved oxygen under the catalysis of (0001) planes densely distributed on Fe₂O₃ and CeO₂ surfaces. The formed As(V) species were bound on Fe_0.21Ce_0.29O surface by forming bidentate and monodentate surface complexes. Finally, the safety of As-containing solution treated with Fe_0.21Ce_0.29O was well proved by the zebrafish embryo developmental toxicity tests.

Insights into the correlation between different adsorption/oxidation/catalytic performance and physiochemical characteristics of Fe-Mn oxide-based composites

Fe-Mn oxide-based composites have been widely used in the solidification of heavy metals or the removal of organic pollutants, which can not only show excellent adsorption/oxidation performance, but also show catalytic activity for common oxidants. At present, the correlation between adsorption/oxidation/catalytic performance and physicochemical characteristics of these composites, and the underlying mechanisms are still unclear. Therefore, the main purpose of this review is to disclose the internal relationship between the physicochemical properties of Fe-Mn oxide-based composites and the pollutant removal performance. From the perspective of crystal phase, the basic units of Fe-Mn oxide composites are divided into Fe-Mn binary oxide (FMBO) and spinel MnFe₂O₄, and the two species were discussed separately in most chapters. The selected physicochemical properties mainly include the type of Fe-Mn oxide composites, surface-to-volume ratio, pore volume, pH_pzc, crystal type, surface functional groups. Because the physicochemical properties that determine how effective Fe-Mn oxide material is at removing contaminants may differ as it performs different functions, we discussed the above problems under different application scenarios (adsorption, oxidation, and advanced oxidation process). Additionally, internal factor (Fe/Mn mole ratio) and external factors (pH_ini, co-ions and ionic strength) were analyzed, and several common synthetic strategies of these composites were presented.

Frontier Materials for Adsorption of Antimony and Arsenic in Aqueous Environments: A Review

As highly toxic and carcinogenic substances, antimony and arsenic often coexist and cause compound pollution. Heavy metal pollution in water significantly threatens human health and the ecological environment. This article elaborates on the sources and hazards of compound antimony and arsenic contamination and systematically discusses the research progress of treatment technology to remove antimony and arsenic in water. Due to the advantages of simple operation, high removal efficiency, low economic cost, and renewable solid and sustainable utilization, adsorption technology for removing antimony and arsenic from sewage stand out among many treatment technologies. The adsorption performance of adsorbent materials is the key to removing antimony and arsenic in water. Therefore, this article focused on summarizing frontier adsorption materials' characteristics, adsorption mechanism, and performance, including MOFs, COFs, graphene, and biomass materials. Then, the research and application progress of antimony and arsenic removal by frontier materials were described. The adsorption effects of various frontier adsorption materials were objectively analyzed and comparatively evaluated. Finally, the characteristics, advantages, and disadvantages of various frontier adsorption materials in removing antimony and arsenic from water were summarized to provide ideas for improving and innovating adsorption materials for water pollution treatment.

Efficient and selective removal of Pb2+ from aqueous solution by using an O- functionalized metal-organic framework

Lead (Pb) is one of the most widespread and highly toxic heavy metals in the environment. The design and synthesis of adsorbent materials for the selective and efficient removal of Pb²⁺ from aqueous solution has received much attention. Herein, the ligand 4,4'-azoxydibenzoic acid with the O^- group was elaborately selected to construct a novel Pr-based MOF for Pb²⁺ removal. The as-prepared MOF adsorbents with high stability exhibited ultra-high selectivity for Pb²⁺, even in the presence of various highly concentrated competitive ions (with the ratios from 1 : 5 to 1 : 50). Also, a high uptake capacity (560.26 mg g^-1) can be achieved for the MOF material, due to the availability of sufficient adsorption sites. The strong electrostatic attraction and coordination interaction between the numerous active O^- sites on MOF adsorbents and Pb²⁺ can account for the good adsorption performance for Pb²⁺, which was systematically verified by zeta potential, FT-IR and XPS studies.

Trivalent antimony removal using carbonaceous nanomaterial loaded with zero-valent bimetal (iron/copper) and their effect on seed growth

As rapid industrial and social growth, antimony mines are the overexploited, leading to the accumulation of trivalent antimony in the aquatic environment near smelters, which harm human health. To eradicate trivalent antimony from water, an innovative nanomaterial in the form of sludge biochar loaded with zero-valent bimetal was synthesized using a liquid-phase reduction method. The adsorption performance of the nanomaterial for trivalent antimony was investigated based on a series of adsorption experiments using sludge biochar, nano zero-valent iron biochar, and nano zero-valent bimetal biochar. The results showed that the optimal adsorption performance of the three nanomaterials for trivalent antimony, considering the economic practicability, was highlighted at solution pH of 3 and 0.05 g of nanomaterial. Additionally, the maximum adsorption capacity of sludge biochar, nano zero-valent iron biochar, and nano zero-valent bimetal biochar is 3.89 mg g^-1 at 35 °C, 32.01 mg g^-1 at 25 °C, 50.96 mg g^-1 at 25 °C, respectively. The adsorption process of sludge biochar is endothermic, resulting in an increase in the adsorption capacity with increasing temperature, whereas the exothermic reaction contributes to decrease in the adsorption capacity at increasing temperature for the other two carbon nanomaterials. The inhibitory effect of coexisting ions was in the order: Al³⁺ > NH₄⁺ > Na⁺ > K⁺; CO₃^2- > CH₃COO^- > H₂PO₄^- > S^2-. Additionally, nanomaterials promoted seed germination and growth. Investigation of the adsorption mechanism using X-ray photoelectron spectroscopy showed that trivalent antimony was oxidised to pentavalent antimony, and Fe(III) was reduced to Fe(II). The formed primary battery formed by copper ions and iron acclerated electron transfer and improved the adsorption rate. This implied that trivalent antimony could be removed through the synergistic action of the adsorption behaviour and redox reaction. Therefore, the biochar loaded with the zero-valent bimetal serves as a pathway for eradicating trivalent antimony.

Recent advances in application of iron-manganese oxide nanomaterials for removal of heavy metals in the aquatic environment

Heavy metal pollution has a serious negative impact on the ecological environment and human health due to its toxicity, persistence, and non-biodegradable properties. Among the technologies applied in heavy metals removal, adsorption has been widely used as the most promising method because of its simple operation, high removal efficiency, strong applicability, and low cost. Iron-manganese oxide nanomaterials, as an effective absorbent, have attracted wide attention due to their simple preparation, wide material sources, and lower ecological impact. So far, no quantitative investigation has been conducted on the preparation and application of iron-manganese oxide nanomaterials in heavy metals removal. This review discussed the preparation methods and characteristics of iron‑manganese oxide nanomaterials over the past decade and provided some basic information for the improvement of preparation methods. The physicochemical properties of iron‑manganese oxide nanomaterials and environmental conditions are regarded as important factors that affect the removal efficiency of heavy metals. In addition, the removal mechanisms of heavy metals in aqueous solution with iron‑manganese oxide nanomaterials were mainly included redox, complex precipitation, electrostatic attraction, and ion exchange. The reusability and practicability in actual wastewater treatment of 3nganese oxide nanomaterials were further discussed. Several key problems still need to be solved in the existing progress, such as improving the ability and stability of the iron‑manganese oxide nanomaterials to remove heavy metals from actual wastewater. In conclusion, this review provides a future direction for the application of iron‑manganese oxide nanomaterials for heavy metals removal and even in the large-scale treatment of actual wastewater.

Synthesis and Weak Hydrogelling Properties of a Salt Resistance Copolymer Based on Fumaric Acid Sludge and Its Application in Oil Well Drilling Fluids

Fumaric acid sludge (FAS) by-produced from phthalic anhydride production wastewater treatment contains a large amount of refractory organic compounds with a complex composition, which will cause environmental pollution unless it is treated in a deep, harmless manner. FAS included saturated carboxylic acid, more than 60%, and unsaturated carboxylic acid, close to 30%, which accounted for the total mass of dry sludge. A new oil well drilling fluid filtrate loss reducer, poly(AM-AMPS-FAS) (PAAF), was synthesized by copolymerizing FAS with acrylamide (AM) and 2-acrylamide-2-methyl propane sulfonic acid (AMPS). Without a refining requirement for FAS, it can be used as a polymerizable free radical monomer for the synthesis of PAAF after a simple drying process. The copolymer PAAF synthesis process was studied, and the optimal monomer mass ratio was determined to be AM:AMPS:FAS = 1:1:1. The temperature resistance of the synthesized PAAF was significantly improved when 5% sodium silicate was added as a cross-linking agent. The structural characterization and evaluation of temperature and complex saline resistance performance of PAAF were carried out. The FT-IR results show that the structure of PAAF contained amide groups and sulfonic acid groups. The TGA results show that PAAF has good temperature resistance. As an oilfield filtrate loss reducer, the cost-effective copolymer PAAF not only has excellent temperature and complex saline resistance, the API filtration loss (FL) was only 13.2 mL/30 min after 16 h of hot rolling and aging at 150 °C in the complex saline-based mud, which is smaller compared with other filtrate loss reducer copolymers, but it also has little effect on the rheological properties of drilling fluid.

Biochar microtube interconnected hydrotalcite nanosheets for the adsorption of aqueous Sb(III)

Actuated by the non-ionic heavy metal of antimony (Sb) contaminants with undesired toxicity to the environment and human health, capturing Sb is urgent to remedy contaminated water. Herein, the lamellar MnCo hydrotalcite was grown on catkin-derived biochar through the in situ etching of ZIF-L to construct a hierarchical microtube@nanosheet hybrid (CLMH) for Sb immobilization. The adsorption behaviour and mechanism of trivalent antimony (Sb (III)) on the CLMH were investigated. The CLMH shows good pH applicability for capturing Sb(III) at pH from 2 to 9. The excellent adsorption capacity of CLMH for Sb(III) is 247.62 mg g^-1at 303 K, and the endothermic process is proved by the positive value of ΔH0(10.54 kJ mol^-1). The adsorption process is fitted with the intra-particle diffusion model, which can be described with external mass transfer, intraparticle diffusion in pores, and equilibrium stage. The adsorption mechanism is proved, which includes the bind of Metal-O-Sb bonds by inner-sphere complex, the embedding of Sb in the intercalation of hydrotalcite, redox between Mn and Sb, and functional groups dependent anchoring effect. The work benefits the understanding of the antimony removal behaviour over the hierarchical microtube@nanosheet hybrids.

Sustainable and efficient technologies for removal and recovery of toxic and valuable metals from wastewater: Recent progress, challenges, and future perspectives

Due to their numerous effects on human health and the natural environment, water contamination with heavy metals and metalloids, caused by their extensive use in various technologies and industrial applications, continues to be a huge ecological issue that needs to be urgently tackled. Additionally, within the circular economy management framework, the recovery and recycling of metals-based waste as high value-added products (VAPs) is of great interest, owing to their high cost and the continuous depletion of their reserves and natural sources. This paper reviews the state-of-the-art technologies developed for the removal and recovery of metal pollutants from wastewater by providing an in-depth understanding of their remediation mechanisms, while analyzing and critically discussing the recent key advances regarding these treatment methods, their practical implementation and integration, as well as evaluating their advantages and remaining limitations. Herein, various treatment techniques are covered, including adsorption, reduction/oxidation, ion exchange, membrane separation technologies, solvents extraction, chemical precipitation/co-precipitation, coagulation-flocculation, flotation, and bioremediation. A particular emphasis is placed on full recovery of the captured metal pollutants in various reusable forms as metal-based VAPs, mainly as solid precipitates, which is a powerful tool that offers substantial enhancement of the remediation processes' sustainability and cost-effectiveness. At the end, we have identified some prospective research directions for future work on this topic, while presenting some recommendations that can promote sustainability and economic feasibility of the existing treatment technologies.