Changeable effects of coexisting heavy metals on transfer of cadmium from soils to wheat grains

Bioaccessibility assessment of Mn, Cu, Fe, and Cd in Henan Province wheat using physiologically based extraction

As an important crop in China, wheat serves as a crucial source of micronutrients and a potential vector for toxic elements in human diets. This study systematically collected wheat grains from 54 counties in Henan Province and conducted in vitro physiological extraction experiments to assess the bioavailability of Mn, Cu, Fe, and Cd in wheat samples. Results turned out that the bioavailability of Cd significantly decreased from the gastric to the intestinal stage. The bioavailability of Mn exhibited similar trends to Cd in the two phases, whereas Cu and Fe showed a higher bioaccessibility in the intestinal phase compared to the gastric phase. Correlation analysis revealed that higher total metal concentrations always resulted in a higher bioaccessible fraction, and the bioaccessibility of Cd was positively correlated with Mn and its bioaccessibility. Eventually, health risk to Cd from wheat consumption evaluated by Monte Carlo simulation indicated that children exhibited a heightened vulnerability to health risks in comparison to adults and risks could be decreased significantly by introducing bioaccessibility. Consequently, it is evident that refining the relationship between bioaccessibility and biotoxicity of elements could provide the methodology to accurately and efficiently assess human health risks.

Eco-nano solutions for rapid phosphorus recovery: Closing the loop for sustainable agriculture

Efficient phosphorus (P) removal from agricultural drainage is crucial for making its removal and recovery economically viable and operationally feasible. This study evaluated cost-effective, green-synthesized nanoparticles (using grass extract) for rapid and efficient P adsorption. Batch experiments were conducted to assess the effect of pH, P concentration, adsorbent dosage, contact time, and temperature on P adsorption. The nanoparticles removed 20 mg/L of P in 5 min, demonstrating their significant potential for effective adsorption in short retention time. They achieved a maximum adsorption capacity of 77.5 mg g-1, outperforming their chemically synthesized counterparts. Moreover, smaller particles exhibited faster initial adsorption, while larger ones contributed more to overall adsorption over time. Modeling results revealed that rapid initial P adsorption was driven by physisorption, while chemisorption controlled the rate of adsorption in the later stages. After five regeneration cycles, the nanoparticles retained over 50 % of their adsorption capacity, demonstrating strong reusability potential. Further research is needed to optimize these nanoparticles for P removal from dynamic agricultural drainage, offering a cost-effective and sustainable solution for P management.

Sulfur-functionalized biochar: Synthesis, characterization, and utilization for contaminated soil and water remediation-a review

The development of innovative, eco-friendly, and cost-effective adsorbents is crucial for addressing the widespread issue of organic and inorganic pollutants in soil and water. Recent advancements in sulfur reagents-based materials, such as FeS, MoS2, MnS, S0, CS2, Na2S, Na2S2O32-, H2S, S-nZVI, and sulfidated Fe0, have shown potential in enhancing the functional properties and elemental composition of biochar for pollutant removal. This review explores the synthesis and characterization of sulfur reagents/species functionalized biochar (S-biochar), focusing on factors like waste biomass attributes, pyrolysis conditions, reagent adjustments, and experimental parameters. S-biochar is enriched with unique sulfur functional groups (e.g., C-S, -C-S-C, C=S, thiophene, sulfone, sulfate, sulfide, sulfite, elemental S) and various active sites (Fe, Mn, Mo, C, OH, H), which significantly enhance its adsorption efficiency for both organic pollutants (e.g., dyes, antibiotics) and inorganic pollutants (e.g., metal and metalloid ions). The literature analysis reveals that the choice of feedstock, influenced by its lignocellulosic content and xylem structure, critically impacts the effectiveness of pollutant removal in soil and water. Pyrolysis parameters, including temperature (200-600 °C), duration (2-10 h), carbon-to-hydrogen (C:H) and oxygen-to-hydrogen (O:H) ratios in biochar, as well as the biochar-to-sulfur reagent modification ratio, play key roles in determining adsorption performance. Additionally, solution pH (2-8) and temperature (288, 298, and 308 K) affect the efficiency of pollutant removal, though optimal dosages for adsorbents remain inconsistent. The primary removal mechanisms involve physisorption and chemisorption, encompassing adsorption, reduction, degradation, surface complexation, ion exchange, electrostatic interactions, π-π interactions, and hydrogen bonding. This review highlights the need for further research to optimize synthesis protocols and to better understand the long-term stability and optimal dosage of S-biochar for practical environmental applications.

Pollution and health risk assessments related to heavy metals on three prominent beaches in Makkah Province, Kingdom of Saudi Arabia: Concerning levels of cadmium pollution

Beach pollution can impact the health of people living in or visiting coastal areas. The primary goal of this research was to investigate the presence of heavy metal pollutants and associated health risks in three distinct coastal cities, Jeddah, Al-Lith, and Al-Qunfudhah, located along Saudi Arabia's Red Sea coast. Forty-three soil samples were collected from different locations, heavy metals including Fe, Zn, Mn, Cu, Cd, and Pb were isolated, and analyzed using inductively coupled plasma optical emission spectroscopy. Various metrics such as pollution indices (PI), integrated pollution indices (IPI), enrichment factors (EF), daily dose averages (ADD), hazard quotients (HQ), and hazard indices (HI), as well as principal component analysis (PCA) and cluster analysis were employed to evaluate the environmental impacts and health risks posed by these heavy metals. The results revealed that Fe, Pb, Cu, Mn, and Zn concentrations in beach zones were below their respective background levels, while concentrations of Cd exceeded corresponding background levels. PCA revealed the highest levels of Pb, Fe, and Mn on Al-Qundudah beach, while Cd and Cu were highest on Al-Lith beach, and Zn was highest on Jeddah beach. PI values highlighted extremely high levels of Cd pollution on all designated beaches. The findings provide a foundational basis for further investigations into health problems potentially related to Cd contamination, such as chronic kidney disease (CKD), osteomalacia, and osteoporosis.

Enhanced reduction of Cd uptake by wheat plants using iron and manganese oxides combined with citrate in Cd-contaminated weakly alkaline arable soils

Iron (Fe) and manganese (Mn) oxides can be used to remediate Cd-polluted soils due to their excellent performance in heavy metal adsorption. However, their remediation capability is rather limited, and a higher content of available Mn and Fe in soils can reduce Cd accumulation in wheat plants due to the competitive absorption effect. In this study, goethite and cryptomelane were first respectively used to immobilize Cd in Cd-polluted weakly alkaline soils, and sodium citrate was then added to increase the content of available Mn and Fe content for further reduction of wheat Cd absorption. In the first season, the content of soil-available Cd and Cd in wheat plants significantly decreased when cryptomelane, goethite and their mixture were used as the remediation agents. Cryptomelane showed a better remediation effect, which could be attributed to its higher adsorption performance. The grain Cd content could be decreased from 0.35 mg kg-1 to 0.25 mg kg-1 when the content of cryptomelane was controlled at 0.5%. In the second season, when sodium citrate at 20 mmol kg-1 was further added to the soils with 0.5% cryptomelane treatment in the first season, the content of soil available Cd was increased by 14.8%, and the available Mn content was increased by 19.5%, leading to a lower Cd content in wheat grains (0.16 mg kg-1) probably due to the competitive absorption. This work provides a new strategy for the remediation of slightly Cd-polluted arable soils with safe and high-quality production of wheat.

Bayesian risk prediction model: An accessible strategy to predict cadmium contamination risk in wheat grain grown in alkaline soils

Excessive cadmium (Cd) concentration in wheat grain is becoming a widespread concern in China. Considering the complexity of Cd transfer in the soil-wheat system, how the Cd risk in wheat grain be accurately predicted from the limited details available is of great significance for the risk management of Cd. Bayes' theory could leverage existing data by combining prior information and observational data, providing a promising strategy with which to calculate a more robust posterior probability of a grain sample exceeding the food safety standard (FSS) for Cd (0.1 mg kg-1). In the current study, a risk prediction model, based on Bayes' theory, was established to achieve a more accurate prediction of the wheat grain Cd risk from a limited number of soil parameters. The risk prediction model could predict the risk probability of wheat grain with a Cd concentration exceeding the FSS under a given soil concentration of either total Cd or diethylenetriaminepentaacetic acid (DTPA)-extractable Cd. Soil total Cd concentration proved to be a better variable for the model with greater predictive accuracy. The model predicted that fewer than 5% of the wheat grain would have a Cd concentration exceeding the FSS when grown in soil with a total Cd concentration of less than 0.299 mg kg-1. The risk probability rose significantly to 50% when the soil total Cd reached 0.778 mg kg-1. The accuracy of the model was greater than the widely applied multiple linear regression model, whereas previously published data from similar soil conditions also confirmed that the Bayesian model could predict wheat Cd risk with minimal error. The proposed model provides an accurate, accessible and cost-effective methodology for predicting Cd risk in wheat grown in alkaline soils before harvest. The wider application to other soil conditions, crops or contaminants using the Bayesian model is also promising for risk management authorities.

The accumulation of cadmium and lead in wheat grains is primarily determined by the soil-reducible cadmium level during wheat tillering

The significant increase in cadmium (Cd) and lead (Pb) pollution in agricultural soil has greatly heightened environmental contamination issues and the risk of human diseases. However, the mechanisms underlying the transformation of Cd and Pb in soil as well as the influencing factors during their accumulation in crop grains remain unclear. Based on the analysis of the distribution trend of Cd and Pb in soil during the growth and development stages of wheat (tillering, filling, and maturity) in alkaline heavy metal-polluted farmland in northern China, this study investigated the response mechanism of soil heavy metal form transformation to soil physicochemical properties, and elucidated the main determining periods and influencing factors for Cd and Pb enrichment in wheat grains. The results showed that an increase in CEC and SOM levels, along with a decrease in pH level, contributed to enhancing the bioavailability of Cd in the soil. This effect was particularly evident during the tillering stage and grain filling stage of wheat. Nevertheless, the effects of soil physicochemical properties on bioavailable Pb was opposite to that on bioavailable Cd. The enrichment of Cd and Pb in grain was significantly influenced by soil pH (r = -0.786, p < 0.01), SOM (r = 0.807, p < 0.01), K (r = -0.730, p < 0.01), AK (r = 0.474, p = 0.019), and AP (r = -0.487, p = 0.016). The reducible form of Cd in soil during the wheat tillering stage was identified as the primary factor contributing to the accumulation of Cd and Pb in wheat grains, with a significant contribution rate of 84.5%. This study provides a greater scientific evidence for the management and risk control of heavy metal pollution in alkaline farmland.

NtARF11 positively regulates cadmium tolerance in tobacco by inhibiting expression of the nitrate transporter NtNRT1.1

Heavy metal cadmium (Cd) is widespread in contaminated soil and an important factor limiting plant growth. NO3- (nitrate) affects Cd uptake and thus changes Cd tolerance in plants; however, the underlying molecular regulatory mechanisms have not yet been elucidated. Here, we analyzed a novel gene, NtARF11 (auxin response factor), which regulates Cd tolerance in tobacco via the NO3- uptake pathway, through experiments with NtARF11-knockout and NtARF11-overexpression transgenic tobacco lines. NtARF11 was highly expressed under Cd stress in tobacco plants. Under Cd stress, overexpression of NtARF11 enhanced Cd tolerance in tobacco compared to that in wild-type tobacco, as shown by the low Cd concentration, high chlorophyll concentration, and low accumulation of reactive oxygen species in NtARF11-overexpressing tobacco. Moreover, low NO3- concentrations were observed in NtARF11-overexpressing tobacco plants. Further analyses revealed direct binding of NtARF11 to the promoter of the nitrate transporter NtNRT1.1, thereby negatively regulating its expression in tobacco. Notably, NtNRT1.1 knockout reduced NO3- uptake, which resulted in low Cd concentrations in tobacco. Altogether, these results demonstrate that the NtARF11-NtNRT1.1 module functions as a positive regulator of Cd tolerance by reducing the Cd uptake in tobacco, providing new insights for improving Cd tolerance of plants through genetic engineering.

Enhancing the phytoextraction efficiency of heavy metals in acidic and alkaline soils by Sedum alfredii Hance: A study on the synergistic effect of plant growth regulator and plant growth-promoting bacteria

Plant growth regulators (PGR) and plant growth-promoting bacteria (PGPB) have the potential in phytoremediation of heavy metals (HMs) contaminated soils. However, their sole application may not yield the optimal results, thus necessitating the combined application. The present study aimed to enhance the phytoremediation efficiency of Sedum alfredii Hance (S. alfredii) in acidic and alkaline soils through the combination of PGR (Brassinolide, BR) and PGPB (Pseudomonas fluorescens, P. fluorescens). The combination of BR and P. fluorescens (BRB treatment) effectively increased the removal efficiency of S. alfredii for Cd, Pb, and Zn by 355.2 and 155.3 %, 470.1 and 128.9 %, and 408.4 and 209.6 %, in acidic and alkaline soils, respectively. Moreover, BRB treatment led to a substantial increase in photosynthetic pigments contents and antioxidant enzymes activities, resulting in a remarkable increase in biomass (86.71 and 47.22 %) and dry mass (101.49 and 42.29 %) of plants grown in acidic and alkaline soils, respectively. Similarly, BRB treatment significantly elevated the Cd (109.4 and 71.36 %), Pb (174.9 and 48.03 %), and Zn levels (142.8 and 104.3 %) in S. alfredii shoots, along with cumulative accumulation of Cd (122.7 and 79.47 %), Pb (183.8 and 60.49 %), and Zn (150.7 and 117.9 %), respectively. In addition, the BRB treatment lowered the soil pH and DTPA-HMs contents, while augmenting soil enzymatic activities, thereby contributing soil microecology and facilitating the HMs absorption and translocation by S. alfredii to over-ground tissues. Furthermore, the evaluation of microbial community structure in phyllosphere and rhizosphere after remediation revealed the shift in microbial abundance. The combined treatment altered the principal effects on S. alfredii HMs accumulation from bacterial diversity to the soil HMs availability. In summary, our findings demonstrated that synergistic application of BR and P. fluorescens represents a viable approach to strengthen the phytoextraction efficacy of S. alfredii in varying soils.

Exploration the interaction of cadmium and copper toxic effects in pakchoi (Brassica chinensis L) roots through combinatorial transcriptomic and weighted gene co-expression network analysis

The interaction between cadmium(Cd) and copper(Cu) during combined pollution can lead to more complex toxic effects on humans and plants.However, there is still a lack of sufficient understanding regarding the types of interactions at the plant molecular level and the response strategies of plants to combined pollution. To assess this, we investigated the phenotypic and transcriptomic patterns of pakchoi (Brassica chinensis L) roots in response to individual and combined pollution of Cd and Cu. The results showed that compared to single addition, the translocation factor of heavy metals in roots significantly decreased (p < 0.05) under the combined addition, resulting in higher accumulation of Cd and Cu in the roots. Transcriptomic analysis of pakchoi roots revealed that compared to single pollution, there were 312 and 1926 differentially expressed genes (DEGs) specifically regulated in the Cd2Cu20 and Cd2Cu100 combined treatments, respectively. By comparing the expression of these DEGs among different treatments, we found that the combined pollution of Cd and Cu mainly affected the transcriptome of the roots in an antagonistic manner. Enrichment analysis indicated that pakchoi roots upregulated the expression of genes involved in glucosetransferase activity, phospholipid homeostasis, proton transport, and the biosynthesis of phenylpropanoids and flavonoids to resist Cd and Cu combined pollution. Using weighted gene co-expression network analysis (WGCNA), we identified hub genes related to the accumulation of Cd and Cu in the roots, which mainly belonged to the LBD, thaumatin-like protein, ERF, MYB, WRKY, and TCP transcription factor families. This may reflect a transcription factor-driven trade-off strategy between heavy metal accumulation and growth in pakchoi roots. Additionally, compared to single metal pollution, the expression of genes related to Nramp, cation/H+ antiporters, and some belonging to the ABC transporter family in the pakchoi roots was significantly upregulated under combined pollution. This could lead to increased accumulation of Cd and Cu in the roots. These findings provide new insights into the interactions and toxic mechanisms of multiple metal combined pollution at the molecular level in plants.

Extraction of heavy metals from copper tailings by ryegrass (Lolium perenne L.) with the assistance of degradable chelating agents

Heavy metal contamination is an urgent ecological governance problem in mining areas. In order to seek for a green and environmentally friendly reagent with better plant restoration effect to solve the problem of low efficiency in plant restoration in heavy metal pollution soil. In this study, we evaluated the effects of three biodegradable chelating agents, namely citric acid (CA), fulvic acid (FA) and polyaspartic acid (PASP), on the physicochemical properties of copper tailings, growth of ryegrass (Lolium perenne L.) and heavy metal accumulation therein. The results showed that the chelating agent application improved the physicochemical properties of copper tailings, increased the biomass of ryegrass and enriched more Cu and Cd in copper tailings. In the control group, the main existing forms of Cu and Cd were oxidizable state, followed by residual, weak acid soluble and reducible states. After the CA, FA or PASP application, Cu and Cd were converted from the residual and oxidizable states to the reducible and weak acid soluble states, whose bioavailability in copper tailings were thus enhanced. Besides, the chelating agent incorporation improved the Cu and Cd extraction efficiencies of ryegrass from copper tailings, as manifested by increased root and stem contents of Cu and Cd by 30.29-103.42%, 11.43-74.29%, 2.98-110.98% and 11.11-111.11%, respectively, in comparison with the control group. In the presence of multiple heavy metals, CA, FA or PASP showed selectivity regarding the ryegrass extraction of heavy metals from copper tailings. PCA analysis revealed that the CA-4 and PASP-7 treatment had great remediation potentials against Cu and Cd in copper tailings, respectively, as manifested by increases in Cu and Cd contents in ryegrass by 90.98% and 74.29% compared to the CK group.

The C2H2 family protein ZAT17 engages in the cadmium stress response by interacting with PRL1 in Arabidopsis

Cadmium (Cd) is a heavy metal and a toxic substance. Soil Cd pollution has emerged as a significant environmental issue that jeopardizes both the safety of agricultural products and human health. PLEIOTROPIC REGULATORY LOCUS 1 (PRL1) has been identified as a crucial factor in Cd stress and a series of defence mechanisms. However, the mechanism through which PRL1 mediates its downstream signalling has remained poorly understood. Here, we discovered a prl1-2 suppressor (sup8) for prl1-2 that complemented the defective development phenotype of prl1-2 under Cd stress. Gene cloning revealed a mutation in the C2H2 transcription factor ZAT17 as the basis for the sup8 phenotype. Genetic and biochemical studies indicated that ZAT17 acts as a negative regulator of Cd tolerance. Transcriptome analysis revealed that ZAT17 influences the alternative splicing (AS) process of multiple Cd-responsive genes by interacting with members of the MAC splicing complex, including PRL1 and CDC5. In conclusion, the identification of the novel gene ZAT17 enriches the understanding of the Cd stress response pathway and provides a valuable candidate locus for breeding Cd-resistant plant varieties.

Effect of EDDS on the rhizosphere ecology and microbial regulation of the Cd-Cr contaminated soil remediation using king grass combined with Piriformospora indica

The negative impacts of soil heavy metals composite pollution on agricultural production and human health are becoming increasingly prevalent. The applications of green chelating agents and microorganisms have emerged as promising alternate methods for enhancing phytoremediation. The regulatory effects of root secretion composition, microbial carbon source utilization, key gene expression, and soil microbial community structure were comprehensively analyzed through a combination of HPLC, Biolog EcoPlates, qPCR, and high-throughput screening techniques. The application of EDDS resulted in a favorable rhizosphere ecological environment for the king grass Piriformospora indica, characterized by a decrease in soil pH by 0.41 units, stimulation of succinic acid and fumaric acid secretion, and an increase in carbon source metabolic activity of amino acids and carbohydrates. Consequently, this improvement enhanced the bioavailability of Cd/Cr and increased the biomass of king grass by 25.7%. The expression of dissimilatory iron-reducing bacteria was significantly upregulated by 99.2%, while there was no significant difference in Clostridium abundance. Furthermore, the richness of the soil rhizosphere fungal community (Ascomycota: 45.8%, Rozellomycota: 16.7%) significantly increased to regulate the proportion of tolerant microbial dominant groups, promoting the improvement of Cd/Cr removal efficiency (Cd: 23.4%, Cr: 18.7%). These findings provide a theoretical basis for the sustainable development of chelating agent-assisted plants-microorganisms combined remediation of heavy metals in soil.

Translocation pattern of heavy metals in soil-rice systems at different growth stages: A case study in the Taihu region, Eastern China

Rice production is crucial for human nutrition and food safety globally. However, it has been a significant sink for potentially harmful metals because of intensive anthropogenic activities. The study was conducted to characterize heavy metal translocation from soil to rice at the filling, doughing and maturing stages, and influencing factors of their accumulation in rice. The distribution and accumulation patterns varied for metal species and growth stages. Cd and Pb accumulation mainly occurred in roots, Cu and Zn were readily transported to stems. Cd, Cu, and Zn accumulation in grains had a descending order of filling > doughing > maturing. Soil heavy metals, TN, EC, and pH exerted important impacts on heavy metals uptake by roots during the period from filling stage to maturing stage. Concentrations of heavy metals in grains were positively correlated with the translocation factors TF_stem-grain (from stem to grain) and TF_leaf-grain (from leaf to grain). Grain Cd exhibited significant correlations with total Cd and DTPA-Cd in the soil at each of the three growth stages. Moreover, Cd in maturing grain could be effectively predicted by soil pH and DTPA-Cd at the filling stage.

Soil heavy metal(loid) pollution and health risk assessment of farmlands developed on two different terrains on the Tibetan Plateau, China

The quality of farmland soils on the Tibetan Plateau is important because of the region's ecological vulnerability and their close link with local food security. Investigation on the pollution status of heavy metal (loid)s (HMs) in the farmlands of Lhasa and Nyingchi on the Tibetan Plateau, China revealed that Cu, As, Cd, Tl, and Pb were apparently enriched, with the soil parent materials being the primary sources of the soil HMs. Overall, the farmlands in Lhasa had higher contents of HMs compared to those in the farmlands of Nyingchi, which could be attributed to the fact that the former were mainly developed on river terraces while the latter were mainly developed on the alluvial fans in mountainous areas. As displayed the most apparent enrichment, with the average concentrations in the vegetable field soils and grain field soils of Lhasa being 2.5 and 2.2 times higher compared to those of Nyingchi. The soils of vegetable fields were more heavily polluted than those of grain fields, probably due to the more intensive input of agrochemicals, particularly the use of commercial organic fertilizers. The overall ecological risk of the HMs in the Tibetan farmlands was low, while Cd posed medium ecological risk. Results of health risk assessment show that ingestion of the vegetable field soils could pose elevated health risk, with children facing greater risk than adults. Among all the HMs targeted, Cd had relatively high bioavailability of up to 36.2% and 24.9% in the vegetable field soils of Lhasa and Nyingchi, respectively. Cd also showed the most significant ecological and human health risk. Thus, attention should be paid to minimize further anthropogenic input of Cd to the farmland soils on the Tibetan Plateau.

Heavy metal distribution in wheat plant components following foliar Cd application

Atmospheric deposition of Cd, from anthropogenic activities, can be directly deposited onto and absorbed into wheat plants, yet, how foliar absorbed Cd is translocated in wheat plants is not well understood. A pot experiment investigated foliar Cd application on the accumulation and distribution of heavy metals in various wheat parts. Wheat was grown in a Cd/heavy metal contaminated soil, and from grain heading to the filling stage, 0, 10, 20, 30 and 40 mg kg^-1 Cd solution was sprayed repeatedly on leaves (grain heads were covered). Foliar Cd application had no effect on grain yield and Cd concentration (3.01-3.51 mg kg^-1 for all treatments), while increased flag leaf blade and sheath Cd concentrations by 1.06-2.77 and 0.00-0.66 times, respectively. Cadmium concentration in the center of the peduncle, from the 40 mg kg^-1 Cd solution treatment, was 1.41 times that of the control (10.3 vs 7.30 mg kg^-1). Foliar Cd application also increased Cd accumulation (concentration × mass) of the flag leaf blade and sheath. Rachis and grain Pb concentrations were reduced, while stem Pb concentration was increased by Cd application. Cadmium application negatively affected whole plant Ni accumulation and concentration of certain wheat parts; Ni absorption inhibition may have occurred in roots via the downward transport of Cd. Overall results implied that the predominant portion of foliar applied Cd was retained in leaves, while lesser portions migrated to peduncle or root and affected the absorption/distribution of other metals in wheat plants. These results are important for further discerning the mechanism of wheat grain Cd accumulation, especially when grain is raised in areas where atmospheric deposition of Cd (e.g., near smelting facilities) is an issue from an environmental and human health perspective.

Application of ferromanganese functionalized biochar simultaneously reduces Cd and Pb uptake of wheat in contaminated alkaline soils

The reduction of Cd and Pb accumulation in wheat grains grown on Cd and Pb contaminated alkaline soils is a pressing issue that needs to be solved. In this study, ferromanganese functionalized biochar (FM-BC) was used to remediate Cd and Pb contaminated alkaline soils and mitigate Cd and Pb accumulation in wheat grains. The immobilization capacity and mechanism of FM-BC were investigated by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) characterization and chemical analysis. Fe and Mn loaded on FM-BC improved the removal efficiencies of DTPA-Cd and DTPA-Pb in soil with DTPA-Cd removal of 22.99%- 52.04% (JM22) and 25.54%- 53.32 (AK58) and DTPA-Pb removal of 11.39%- 22.36% (JM22) and 5.38%- 13.00% (AK58). The FT-IR and XRD results indicated that the complexation and precipitation of Cd and Pb with the Fe-Mn oxides and the oxygen-containing functional groups on biochar surface stabilized the Cd and Pb in soil for the observation of Cd₂Mn₃O₈, PbHPO₄, CdCO₃, and PbO₂ on FM-BC isolated from contaminated soils. FM-BC with excellent adsorption capacity reduced the available Cd and Pb in the soil, therefore, thereby inhibiting the Cd and Pb accumulation in wheat. In the 3% FM-BC treatment, Cd and Pb contents in wheat grains were lower than 0.10 mg/kg and 0.20 mg/kg, respectively, reaching the national safety standards. And FM-BC increased the Fe, Mn, Na and Zn contents in wheat grains, and improved the growth and yield of wheat. These findings suggest that FM-BC can be considered a prospective and effective material for remediation of alkaline soils contaminated with Cd and Pb.

Manganese and copper additions differently reduced cadmium uptake and accumulation in dwarf Polish wheat (Triticum polonicum L.)

This study investigated the effects of manganese (Mn) and copper (Cu) on dwarf Polish wheat under cadmium (Cd) stress by evaluating plant growth, Cd uptake, translocation, accumulation, subcellular distribution, and chemical forms, and the expression of genes participating in cell wall synthesis, metal chelation, and metal transport. Compared with the control, Mn deficiency and Cu deficiency increased Cd uptake and accumulation in roots, and Cd levels in root cell wall and soluble fractions, but inhibited Cd translocation to shoots. Mn addition reduced Cd uptake and accumulation in roots, and Cd level in root soluble fraction. Cu addition did not affect Cd uptake and accumulation in roots, while it caused a decrease and an increase of Cd levels in root cell wall and soluble fractions, respectively. The main Cd chemical forms (water-soluble Cd, pectates and protein integrated Cd, and undissolved Cd phosphate) in roots were differently changed. Furthermore, all treatments distinctly regulated several core genes that control the main component of root cell walls. Several Cd absorber (COPT, HIPP, NRAMP, and IRT) and exporter genes (ABCB, ABCG, ZIP, CAX, OPT, and YSL) were differently regulated to mediate Cd uptake, translocation, and accumulation. Overall, Mn and Cu differently influenced Cd uptake and accumulation; Mn addition is an effective treatment for reducing Cd accumulation in wheat.

Distribution and accumulation of cadmium in soil under wheat-cultivation system and human health risk assessment in coal mining area of China

The soil contamination caused by the discharge of cadmium (Cd) from coal mining activities has aroused continuous attention due to the detrimental effects on the human health. This study aimed to investigate the characteristics on distribution of Cd in soils and its accumulation in wheat grains under wheat-cultivation system, and further assess the human health risks to adults and children. 58 soils and wheat samples in pairs from Linhuan coal mining area, Anhui Province were collected and analyzed. Results showed that the concentrations of Cd in 17.24% of soil samples exceeded the limit value established by the Ministry of Ecology and Environment. The ordinary kriging interpolation displayed that the spatial variability of Cd concentrations in soils was mainly influenced by coal mining activities. The transfer capacity of Cd from soils to wheat roots was greater than that from the wheat roots to grains. Multiple linear regression model clarified that soil pH and exchangeable Cd fraction in soils were the critical factors affecting the Cd accumulation in wheat grains. The carcinogenic risk of Cd levels in our studied wheat grains was a concern but still within the acceptable range, while their non-carcinogenic hazard was negligible for adults and children. The calculation results were in accord with the uncertainty analysis conclusion based on Monte Carlo simulation. The study was expected to promote the source management and control strategy of reducing tailing discharge, and providing scientific references for current soil remediation and land degradation prevention.

Polyaspartic acid assisted-phytoremediation of cadmium-contaminated farmland: Phytoextraction efficiency, soil quality, and rhizosphere microbial community

Cadmium is highly toxic and one of the most dangerous metal pollutants in soil, and poses a serious threat to human health through soil-crop-food chain transmission. Polyaspartic acid (PASP) is a biodegradable additive that is environment-friendly compared to traditional chelating agents. Current studies have explored its effect on auxiliary phytoextraction at a laboratory scale; however, the method is still rarely reported at the field scale. Therefore, this study used two ecotypes of Pennisetum sinese in a field experiment for 3 years in Jiaoxi Township, Liuyang City, Hunan Province, China, to understand the effect of PASP on the phytoremediation of Cd-contaminated soil and soil quality through long-term field studies. Moreover, because the soil microbial community responds well to the phytoremediation effect of heavy metal (including Cd)-contaminated soil, the changes in rhizosphere soil microbial community diversity and composition were analyzed. After 2 years of PASP-enhanced phytoremediation, the PASP application increased the total Cd reduction in soil by 237 % and 255 %, and the soil DTPA-extractable Cd content decreased to 0.092 and 0.087 mg kg^-1. When the application of PASP ceased in the third year, the two ecotypes of P. sinese obtained after harvest could achieve feed safety. Our study showed that the application of PASP could significantly increase the Cd extraction capacity and shoot biomass of P. sinese, and maintain soil health by optimizing the composition and structure of rhizosphere bacterial communities. The rhizosphere bacterial community structure was improved and dominated by Acidobacteriota, Proteobacteria, and Chloroflexi at the phylum level, and the increased abundance of Acetobacter, Enterobacter, Pseudomonas, and Stenotrophomonas at the genus level may promote heavy metal detoxification in soil, plant growth, and phytoremediation. Long-term field monitoring demonstrated that the low-cost and eco-friendly features of PASP made it a good candidate for enhancing phytoextraction efficiency and regulating soil microbial communities for remediation.

Sources, transfers and the fate of heavy metals in soil-wheat systems: The case of lead (Pb)/zinc (Zn) smelting region

Heavy metals (HMs) from smelters pose severe challenges to the environmental soil quality of surrounding farmlands, and threaten human health through the food chain. This study explored the environmental effects of smelting activities on farmland soil, and additionally assessed the enrichment, transfer and health risk of HMs in soil-wheat systems. Multiple characterization results were combined to demonstrate that HMs from smelter waste were transferred to the surrounding soil. It was determined that the enrichment of HMs in soil-wheat systems is mainly controlled by the total HM concentration and pH in soil. Furthermore, the priority pollutant in soil-wheat systems was found to be Cd, and Cd affected the transfer of Cu, Mn and Pb from soil to wheat roots. Interestingly, the -OH stretching, C-H stretching, N-H amide and C-O bending were involved in detoxifying HMs in wheat. The mean values of non-carcinogenic and carcinogenic risks by consuming wheat grain were 9.1, 1.4E-02 (adults) and 11.3, 3.3E-03 (children), respectively, indicating a noteworthy health risk. This study highlighted the critical issues arising from Pb/Zn smelting activities on agricultural soils. Notwithstanding, to ensure food security, the affected regions could opt to follow up on the type of crops grown.

Prediction of Cd Accumulation in Wheat (Triticum aestivum L.) and Simulation Calculation of Lime or Zn Fertilizer Remediated Soil

Soil Cd contamination to wheat raise wide concerns over food safety. It is essential to find the key factors affecting Cd accumulation in wheat and to establish a predictive model. The effects of pH, Zn, Ca, and DOM on the accumulation of Cd in wheat were investigated using hydroponic experiments. The results showed that Zn was the most important factor inhibiting Cd uptake in wheat. Models were developed to predict the Cd contents in wheat tissues based on the ion concentration. Meanwhile, the available Cd contents in soil were predicted using a geochemical multi-surface model (MSM) which is suitable for various soils and conditions. The combination of the hydroponic accumulation model and MSM exhibits good predictions of wheat-Cd (R² = 0.822-0.862, RMSE = 0.317-0.533). The results of this study can quantitatively predict the accumulation of Cd in wheat and provide a reference for soil remediation and safe wheat production.

Rapid and Effective Lead Elimination Using Cow Manure Derived Biochar: Balance between Inherent Phosphorus Release and Pollutants Immobilization

Cow manure derived biochar (CMBC) can serve as a promising functional material, and CMBC can be regarded as an ecofriendly approach compared to conventional ones. CM bioadsorbent can be employed for heavy metal immobilization (such as for lead) as well as an amendment to increase soil fertility (e.g., phosphorus). Few studies have examined the surface interactions between pollutants and bioadsorbents when inherent nutrient release is present. In this work, CMBC was prepared and applied for Pb(II) removal, and the vital roles of released phosphorus from CMBC were comprehensively disclosed. Furthermore, CMBC could immobilize part of the Pb(II) in soil and promote plant growth. CM400 was an effective adsorbent whose calculated Q_e reached 691.34 mg·g^-1, and it rapidly adsorbed 98.36 mg·g^-1 of Pb(II) within 1 min. The adsorption mechanisms of Pb(II) by CMBC include ion exchange, physical adsorption, electrostatic attraction, chemical precipitation, surface complexation, and cation-π bond interaction. Based on the residual phosphorus content and adsorption effect, complexation rather than the chemical precipitation had a greater contribution toward adsorption. Besides, as the concentration of Pb(II) increased, the main adsorption mechanisms likely transformed from chemical precipitation to ion exchange and complexation. CMBC not only had a good effect on Pb(II) removal in the solution, but also immobilized the Pb(II) in soil to restrain plant uptake as well as promote plant growth. The main novelty of this work is providing more insights to the cow manure bio adsorbent on Pb immobilization and phosphorus release. This study is expected to serve as a basis and reference for analyzing the release effects of inherent nutrients and the interfacial behaviors with heavy metals when using CMBC and other nutrient-rich carbon-based fertilizers for pollution control.

Insights into site-specific influences of emission sources on accumulation of heavy metal(loid)s in soils by wheat grains

Excessive accumulation of heavy metal(loid)s in agricultural environment usually originates from anthropogenic activities. Both large diversities of emission sources and complexity of plant accumulation challenge the understanding of the site-specific effects of emission sources on heavy metal(loid)s in wheat grains. Herein, both soil samples and wheat grain samples (n = 80) were collected from the farmland of Jiyuan City, China. Soil and grain burdens of heavy metal(loid)s were determined by inductively coupled plasma mass spectrometry (ICP-MS) and/or X-ray fluorescence spectrometry (XRF). The quotients (Q) were developed to indicate relative impacts of industrial plants and traffic to soil sites. Principal component analysis-absolute principal component scores-multivariate linear regression (PCA-APCS-MLR) analysis was conducted to reveal the source contributions to heavy metal(loid)s in grains, considering Q values, soil, and wheat grain data. Results showed that contributions of main sources and factors drastically varied with soil sites, and usually overlapped to different extents. For grain Cd and grain Pb, natural soil silicate (0.066/0.104 mg/kg) and iron-bearing minerals (- 0.044/ - 0.174 mg/kg) contributed to high extents, while metal smelting activities (0.018/0.019 mg/kg) and agronomic activities (- 0.017/ - 0.019 mg/kg) unexpectedly posed low or moderate contributions. The pH-mediated availability of soil Cd (0.035 mg/kg) and the sand-dust weather (0.028 mg/kg) also made considerable contributions to grain Cd. For grain As, both natural soil iron-bearing (- 0.048 mg/kg) and silicate minerals (- 0.013 mg/kg) made negative contributions. The results benefit to the decision-making of pollution remediation of farmland soils in the regional scales.

Prediction models for monitoring selenium and its associated heavy-metal accumulation in four kinds of agro-foods in seleniferous area

Se-rich agro-foods are effective Se supplements for Se-deficient people, but the associated metals have potential risks to human health. Factors affecting the accumulation of Se and its associated metals in Se-rich agro-foods were obscure, and the prediction models for the accumulation of Se and its associated metals have not been established. In this study, 661 samples of Se-rich rice, garlic, black fungus, and eggs, four typical Se-rich agro-foods in China, and soil, matrix, feed, irrigation, and feeding water were collected and analyzed. The major associated metal for Se-rich rice and garlic was Cd, and that for Se-rich black fungus and egg was Cr. Se and its associated metal contents in Se-rich agro-foods were positively correlated with Se and metal contents in soil, matrix, feed, and matrix organic contents. The Se and Cd contents in Se-rich rice grain and garlic were positively and negatively correlated with soil pH, respectively. Eight models for predicting the content of Se and its main associated metals in Se-rich rice, garlic, black fungus, and eggs were established by multiple linear regression. The accuracy of the constructed models was further validated with blind samples. In summary, this study revealed the main associated metals, factors, and prediction models for Se and metal accumulation in four kinds of Se-rich agro-foods, thus helpful in producing high-quality and healthy Se-rich.

Evaluation of the Usefulness of Sorbents in the Remediation of Soil Exposed to the Pressure of Cadmium and Cobalt

An undesirable side effect of economic progress is increasingly severe pollution with heavy metals, responsible for the degradation of ecosystems, including soil resources. Hence, this research focused on examining six adsorbents in order to distinguish a reactive mineral with the highest capacity to remediate soils contaminated with heavy metals. To this end, the soil was polluted with Co²⁺ and Cd²⁺ by applying the metals in concentrations of 100 mg kg^-1 d.m. The extent of soil equilibrium disturbances was assessed by evaluating the response of the soil microbiome, activity of seven soil enzymes, and the yields of Helianthus annuus L. Six sorbents were evaluated: a molecular sieve, expanded clay (ExClay), halloysite, zeolite, sepiolite and biochar. Co²⁺ and Cd²⁺ proved to be significant inhibitors of the soil's microbiological and biochemical parameters. Organotrophic bacteria among the analysed groups of microorganisms and dehydrogenases among the soil enzymes were most sensitive to the effects of the metals. Both metals significantly distorted the growth and development of sunflower, with Co²⁺ having a stronger adverse impact on the synthesis of chlorophyll. The molecular sieve and biochar were the sorbents that stimulated the multiplication of microorganisms and enzymatic activity in the contaminated soil. The activity of enzymes was also stimulated significantly by zeolite and sepiolite, while the growth of Helianthus annuus L. biomass was stimulated by the molecular sieve, which can all be considered the most useful reactive materials in the remediation of soils exposed to Co²⁺ and Cd²⁺.

Differential Uptake and Translocation of Cadmium and Lead by Quinoa: A Multivariate Comparison of Physiological and Oxidative Stress Responses

Contamination of soils with cadmium (Cd) and lead (Pb) has emerged as a serious environmental issue that reduces crop productivity. However, the metals tolerance and accumulation potential of quinoa (Chenopodium Quinoa Willd) under the combined stress of Cd and Pb has not yet been explored. In the present hydroponic study, the physiological and biochemical characteristics of quinoa exposed to Cd and Pb were explored. Four-week-old plants of quinoa genotype ‘Puno’ were grown under different concentrations of Cd (0, 50 and 100 µM), Pb (0, 250 and 500 µM) alone as well as in combinations. The results showed that with increasing Cd and Pb levels in the nutrient solution, the plant biomass, stomatal conductance and chlorophyll contents were decreased. However, the concurrent application of higher concentrations of Cd (100 µM) and Pb (500 µM) caused even more reduction in the plant biomass (more than 50% than the control) and physiological attributes. The combined application of Pb and Cd caused oxidative stress through an overproduction of H2O2 (10-fold) and TBARS (12.5-fold), leading to decrease in membrane stability (52%). The oxidative stress was alleviated by a 7-fold, 10-fold and 9-fold overactivation of superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT), respectively. An excessive uptake of Cd resulted in a limited uptake of Pb and K in the roots and shoots of quinoa plants. The Cd and Pb tolerance and uptake potential of Puno showed its ability to stabilize Cd and Pb in co-contaminated soils.

Monitoring Potentially Toxic Element Pollution in Three Wheat-Grown Areas with a Long History of Industrial Activity and Assessment of Their Effect on Human Health in Central Greece

Agricultural lands, especially those where wheat is cultivated, in the vicinity of intense anthropogenic activities may be laden with potentially toxic elements (PTEs), resulting in increased risk for human health. In this study we monitored three regions located in central Greece, currently cultivated with wheat: Domokos and Eretria, two areas with abandoned chromium mines, but never studied before, and the industrial area of Volos, near a major steel factory. All soils were alkaline with medium CaCO₃ content. As expected, Cr was extremely high in the first two areas (705.2 in Eretria and 777.5 mg kg⁻¹ in Domokos); Ni was also found elevated (1227 in Eretria, 1315 in Domokos and 257.6 mg kg⁻¹ in the steel factory), while other harmful metals (Cd, Cu, Pb and Zn) were rather low. As a result, pollution load index, a cumulative index showing the contamination level of an area, was higher than 1.0 in all three areas (Eretria = 2.20, Domokos = 2.28, and steel factory = 1.61), indicating high contamination and anthropogenic inputs. As for the wheat parts (shoots and grains), they were found to have no elevated concentrations of any of the measured metals in all three study areas, probably due to the alkaline soil pH that decelerates metal mobility. This was also confirmed by the very low soil-to-plant transfer coefficient values for all metals. In assessing the possible risk concerning human health, we found that the soil-to-human pathway would induce no significant risk (exhibited by hazard index of less than 1.0), while the risk from grain-to-human resulted in considerable risk for human health in the steel factory of Volos (where HI > 1.0). Our findings suggest that rural areas never studied before with a history in some offensive anthropogenic activity can prove to be a contamination hotspot; we regard this study as a pivotal for similarly never-visited-before areas casually cultivated with wheat (or other important crops for human nutrition). We further recognize the need for a more in-depth study that would acknowledge the geochemical speciation of the studied metals and also monitor other important crops and their possible uptake of PTEs.