Activation of peracetic acid via Co3O4 with double-layered hollow structures for the highly efficient removal of sulfonamides: Kinetics insights and assessment of practical applications

Periodate activation for tetracycline degradation with MoS2/MnFe2O4 nanocomposite: Efficiency and Mechanistic insights

In this study, a MoS2/MnFe2O4 nanocomposite was employed as a periodate (PI) activator for the first time, aiming to synergistically degrade tetracycline (TC). Three different ratios of MoS2/MnFe2O4 nanocomposites were synthesized using a solvothermal method, among which MoS2/MnFe2O4-3 (MMF-3) exhibited the highest efficiency in TC degradation. At pH 4.65, PI concentration of 0.2 mM and MMF-3 dosage of 0.2 g/L, the removal rate of TC was 80.74 %. The potential reaction mechanism of the MMF-3/PI system was revealed, identifying IO•3, 1O2, and •OH as the primary reactive oxygen species (ROS) responsible for TC removal. Furthermore, the Mo(IV)/Mo(VI) cycle within the MoS2/MnFe2O4 composite significantly enhanced the Fe(II)/Fe(III) redox cycle, promoting ROS regeneration and thereby enabling the efficient degradation of TC. Two potential pathways for TC degradation were proposed, and the biotoxicity of the degradation process was assessed, demonstrating that the MMF-3/PI system is environmentally friendly and does not produce highly toxic byproducts. Additionally, Cl- and NO3- showed negligible effects on TC removal, while H2PO4- significantly inhibited the process, and humic acid enhanced it. Cycling experiments revealed consistent TC removal rates exceeding 70 % across four cycles, highlighting the stability and reusability of the MMF-3 material. The removal efficiency of TC was largely unaffected by various natural water conditions, underscoring the substantial practical potential of the MMF-3/PI system. Overall, the MMF-3/PI system offers a promising approach to mitigating antibiotic contamination in water bodies.

The reactivity of organic radicals in the performic, peracetic, perpropionic acids-based advanced oxidation process: A case study of sulfamethoxazole

Advanced oxidation processes (AOPs) based on peracetic acid (PAA) displayed great potential in removing emerging contaminants by generating HO• and organic radicals. Performic and perpropionic acids (PFA and PPA) also act as disinfectants, but their application potential has not been investigated yet. Here, we investigated the degradation mechanism and kinetics of sulfamethoxazole (SMX) by HO•, RC(O)O• species (including HC(O)O•, CH3C(O)O• and CH3CH2C(O)O•) and RC(O)OO• species (including HC(O)OO•, CH3C(O)OO• and CH3CH2C(O)OO•). The results show that the calculated reaction rate constants of SMX follow the order of HC(O)O• > CH3C(O)O• > CH3CH2C(O)O• > HO• > HC(O)OO• > CH3C(O)OO• > CH3CH2C(O)OO•. The reactivity towards SMX is strongly correlated with the redox potentials of reactive radicals. Hence, the RCOO• species play dominant roles in the purification of SMX in PFA/PAA/PPA-based AOPs. The degradation of SMX mainly proceeds via addition at the benzene ring, the hydrogen abstraction from the -NH2 group as well as the single electron transfer reaction. This study highlights the fundamental aspects of PFA, PAA, and PPA in the purification of sulfamethoxazole and enhances the role of organic radicals in the AOPs based on organic peracetic acids.

New insights into the pH-dependent removal of sulfamethoxazole in peracetic acid activation systems: From mechanistic exploration to practical application potentials

Peracetic acid (PAA) as emerging oxidant in advanced oxidation processes (AOPs) has attracted widespread attention in purifying water pollution. In this research, the removal of target contaminant (sulfamethoxazole, SMX) was investigated through PAA activation by a facile catalyst (Co@C), and the active sites of catalyst were identified as sp3-C, Oads, and Co0 by correlation analysis. Especially, different pH adjustment strategies were designed, including System A (adjusting pH after adding PAA) and System B (adjusting pH before adding PAA), to investigate the impact of oxidant acidity and alkalinity on solution microenvironment as well as effect and mechanism of pollutant removal. The results showed that HO· and CH3C(O)OO· dominated in System A, while Co(IV)O2+ was also observed in System B. Both systems showed optimal SMX degradation (98 %). However, System A exhibited excellent water quality tolerance (efficiency > 78 %), superior sustained catalyst activation (efficiency > 80 % in 40 h), less ion leaching (41 μg L-1), and lower products toxicity. Moreover, the pH of solution after reaction in System B was intensely acidic, requiring costly pH adjustments for discharge. This study unveils the strategy of adjusting pH after adding PAA is preferable for water purification, enriching the emerging research of PAA-based AOPs for the remediation of environments.

Kumquat peel-derived biochar to support zeolitic imidazole framework-67 (ZIF-67) for enhancing peracetic acid activation to remove acetaminophen from aqueous solution

This study presents the synthesis of a novel composite catalyst, ZIF-67, doped on sodium bicarbonate-modified biochar derived from kumquat peels (ZIF-67@KSB3), for the enhanced activation of peracetic acid (PAA) in the degradation of acetaminophen (APAP) in aqueous solutions. The composite demonstrated a high degradation efficiency, achieving 94.3% elimination of APAP at an optimal condition of 200 mg L-1 catalyst dosage and 0.4 mM PAA concentration at pH 7. The degradation mechanism was elucidated, revealing that superoxide anion (O2•-) played a dominant role, while singlet oxygen (1O2) and alkoxyl radicals (R-O•) also contributed significantly. The degradation pathways of APAP were proposed based on LC-MS analyses and molecular electrostatic potential calculations, identifying three primary routes of transformation. Stability tests confirmed that the ZIF-67@KSB3 catalyst retained an 86% efficiency in APAP removal after five successive cycles, underscoring its durability and potential for application in pharmaceutical wastewater treatment.

Infancy of peracetic acid activation by iron, a new Fenton-based process: A review

The exacerbated global water scarcity and stricter water directives are leading to an increment in the recycled water use, requiring the development of new cost-effective advanced water treatments to provide safe water to the population. In this sense, peracetic acid (PAA, CH3C(O)OOH) is an environmentally friendly disinfectant with the potential to challenge the dominance of chlorine in large wastewater treatment plants in the near future. PAA can be used as an alternative oxidant to H2O2 to carry out the Fenton reaction, and it has recently been proven as more effective than H2O2 towards emerging pollutants degradation at circumneutral pH values and in the presence of anions. PAA activation by homogeneous and heterogeneous iron-based materials generates - besides HO• and FeO2+ - more selective CH3C(O)O• and CH3C(O)OO• radicals, slightly scavenged by typical HO• quenchers (e.g., bicarbonates), which extends PAA use to complex water matrices. This is reflected in an exponential progress of iron-PAA publications during the last few years. Although some reviews of PAA general properties and uses in water treatment were recently published, there is no account on the research and environmental applications of PAA activation by Fe-based materials, in spite of its gratifying progress. In view of these statements, here we provide a holistic review of the types of iron-based PAA activation systems and analyse the diverse iron compounds employed to date (e.g., ferrous and ferric salts, ferrate(VI), spinel ferrites), the use of external ferric reducing/chelating agents (e.g., picolinic acid, l-cysteine, boron) and of UV-visible irradiation systems, analysing the mechanisms involved in each case. Comparison of PAA activation by iron vs. other transition metals (particularly cobalt) is also discussed. This work aims at providing a thorough understanding of the Fe/PAA-based processes, facilitating useful insights into its advantages and limitations, overlooked issues, and prospects, leading to its popularisation and know-how increment.

Catalytic activation of peracetic acid for pelargonic acid vanillylamide degradation by Co3O4 nanoparticles in-situ anchored carbon-coated MXene nanosheets: Performance and mechanism insight

Pelargonic acid vanillylamide (PAVA), a capsaicin-type dacryagogue agent utilized for counter-terrorism and riot control, possesses a low stimulus threshold. This characteristic can lead to environmental contamination following its application and may easily result in secondary stimulation to personnel. Cobalt-doped Ti3C2-MXene nanosheets (Co3O4/Ti3C2@C) were synthesized for the purpose of activating peracetic acid (PAA) and degrading PAVA. A carbon layer was coated on the surface of Ti3C2-MXene nanosheets to address the challenge of poor oxygen resistance in MXenes, thus preventing a significant decline in surface reactivity. The BET surface area of Co3O4/Ti3C2@C was expanded to 149.6 m2/g, significantly exceeding that of Ti3C2 (13.0 m2/g) and Co3O4 (56.4 m2/g). With 0.5 mg/mL of Co3O4/Ti3C2@C and 0.35 mM of PAA, 100 mg/L of PAVA was completely degraded within 60 min. The augmented BET surface area and the presence of more active sites confer remarkable PAA activation and catalytic degradation properties toward PAVA. Parameters such as initial pH, PAVA concentration, catalyst dosage, and PAA concentration on PAVA degradation were systematically assessed. Furthermore, the reusability and stability of the nanocomposite were substantiated through recycling tests. Radical quenching experiments and electron paramagnetic resonance analysis demonstrated the acetylperoxy radical (CH3CO3) as the primary species responsible for PAVA degradation. This research serves as an illustration of the utilization of MXene and transition metal activated PAA in wastewater treatment.

Hydroxylamine enhanced the degradation of diclofenac in Cu(II)/peracetic acid system: Formation and contributions of CH3C(O)O•, CH3C(O)OO•, Cu(III) and •OH

The slow reduction of Cu(II) into Cu(I) through peracetic acid (PAA) heavily limited the widespread application of Cu(II)/PAA system. Herein, hydroxylamine (HA) was proposed to boost the oxidative capacity of Cu(II)/PAA system by facilitating the redox cycle of Cu(I)/Cu(II). HA/Cu(II)/PAA system was quite rapid in the removal of diclofenac within a broad pH range of 4.5-9.5, with a 10-fold increase in the removal rate of diclofenac compared with the Cu(II)/PAA system at an optimal initial pH of 8.5. Results of UV-Vis spectra, electron paramagnetic resonance, and alcohol quenching experiments demonstrated that CH3C(O)O•, CH3C(O)OO•, Cu(III), and •OH were involved in HA/Cu(II)/PAA system, while CH3C(O)OO• was verified as the predominant reactive species of diclofenac elimination. Different from previously reported Cu-catalyzed PAA processes, CH3C(O)OO• mainly generated from the reaction of PAA with Cu(III) rather than CH3C(O)O• and •OH. Four possible elimination pathways for diclofenac were proposed, and the acute toxicity of treated diclofenac solution with HA/Cu(II)/PAA system significantly decreased. Moreover, HA/Cu(II)/PAA system possessed a strong anti-interference ability towards the commonly existent water matrix. This research proposed an effective strategy to boost the oxidative capacity of Cu(II)/PAA system and might promote its potential application, especially in copper-contained wastewater.

Carbon nitride nanotubes anchored with Cu(I) triggers peracetic acid activation with visible light for removal of antibiotic contaminants: Probing mechanisms of non-radical pathways and identifying active sites

The peracetic acid (PAA)-activation process has attracted much attention in wastewater treatment. However, the low electron efficiency at the interface between heterogeneous catalysts and PAA has affected its practical application. For this study, we developed a carbon nitride hollow-nanotube catalysts with dispersed Cu(I) sites (Cu(I)-TCN) for the photocatalytic activation of PAA for antibiotics degradation. The obtained Cu(I)-TCN catalyst demonstrated an enhanced capacity for visible light harvesting along with increased charge transfer rates. Specifically, the developed Cu(I)-TCN/visible light/PAA system was able to completely remove antibiotics within 20 min, with a kinetic constant that was 25 times higher than a Cu(I)-TCN/visible light system, and 83 times higher than Cu(I)-TCN/PAA systems. Scavenging experiment and electron paramagnetic resonance (EPR) indicated that singlet oxygen was dominant reactive specie for sulfisoxazole (SIZ) removal. Besides, electrochemical tests and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy verified that the electron transfer efficiency of PAA activation was promoted due to the formation of inner-sphere interactions between PAA and Cu(I)-TCN, resulting in the quick removal of antibiotics. Further, after exposure to visible light, the Cu(I)-TCN excited photogenerated electrons which supplemented the electrons consumed in the reaction and drove the valence cycle of Cu ions. Overall, this research offered novel insights into the non-radical pathway for heterogeneous visible light-driven advanced oxidation processes and their potential for practical wastewater remediation.

Enhanced tetracycline abatement by peracetic acid activation with sulfidation of nanoscale zerovalent iron

Iron-based heterogeneous catalysts due to the environmental friendliness have been widely studied for activation of peracetic acid (PAA) for abatement of organic contaminants in the water and wastewater treatment. However, the slow reduction from Fe(III) to Fe(II) of the iron-based catalysts as the rate-limiting step results in the low PAA activation efficiency. With regard to the excellent electron-donating capability of the reductive sulfur species, sulfidized nanoscale zerovalent iron is proposed for PAA activation (simplified as the S-nZVI/PAA process) and the tetracycline (TC) abatement efficacy and mechanism of this process are elucidated. The optimal sulfidation ratio (S/Fe) of S-nZVI is 0.07, which exhibits superior performance in PAA activation for TC abatement with the efficiency of 80-100% in the pH range of 4.0-10.0. The radical quenching experiments and oxygen release measurements confirm that acetyl(per)oxygen radicals (CH₃C(O)OO•) are the main radical contributing to TC abatement. The influence of sulfidation on the crystalline structure, hydrophobicity, corrosion potential, and electron transfer resistance of S-nZVI is evaluated. The main sulfur species on the S-nZVI surface are identified as ferrous sulfide (FeS) and ferrous disulfide (FeS₂). The analysis by X-ray photoelectron spectroscopy (XPS) and Fe(II) dissolution suggest that the reductive sulfur species can accelerate the conversion from Fe(III) to Fe(II). In summary, the S-nZVI/PAA process exhibits application prospects for the abatement of antibiotics in the aquatic environments.

New insights into the degradation of micro-pollutants in the hydroxylamine enhanced Fe(II)/peracetic acid process: Contribution of reactive species and effects of pH

The hydroxylamine-enhanced Fe(II)/peracetic acid (PAA) process is a promising advanced oxidation process (AOP) with the generation of reactive species (RS) including RO•, •OH and Fe(IV). Nevertheless, it is still challenging to identify which RS is the major intermediate oxidant, and the reasons why the optimal condition is pH 4.5 rather than 3.0 are also unclear. Herein, the generation of RS and their contribution to the degradation of three micro-pollutants were explored. The quenching experiments and pseudo first-order kinetic model demonstrated that RO• rather than the other two RS were predominant. Then the overall generation and evolution pathways of RS were depicted. The elevation of pH (3.0-4.5) would accelerate the Fe(II)/Fe(III) redox cycle through the enhanced reduction of Fe(III) by hydroxylamine and induce the conversion of Fe(IV) to RO•, which benefited naproxen degradation. While the adverse Fe(III) precipitation would dominate the reduced degradation performance with the solution pH higher than 4.5. The elevation of PAA and Fe(II) dosages sped up the PAA activation, while excess hydroxylamine could consume the formed RS and exhibited an inhibitory effect. This study helps further understand the role of HA and differentiate the contribution of RS in the emerging PAA-based AOPs.

Review of Advanced Oxidation Processes Based on Peracetic Acid for Organic Pollutants

In recent years, the removal of organic pollutants from water and wastewater has attracted more attention to different advanced oxidation processes (AOPs). There has been increasing interest in using peroxyacetic acid (PAA), an emerging oxidant with low or no toxic by-products, yet the promotion and application are limited by unclear activation mechanisms and complex preparation processes. This paper synthesized the related research results reported on the removal of organic pollutants by PAA-based AOPs. Based on the research of others, this paper not only introduced the preparation method and characteristics of PAA but also summarized the mechanism and reactivity of PAA activated by the free radical pathway and discussed the main influencing factors. Furthermore, the principle and application of the newly discovered methods of non-radical activation of PAA in recent years were also reviewed for the first time. Finally, the shortcomings and development of PAA-based AOPs were discussed and prospected. This review provides a reference for the development of activated PAA technology that can be practically applied to the treatment of organic pollutants in water.