Construction of a novel S-scheme heterojunction piezoelectric photocatalyst V-BiOIO3/FTCN and immobilization with floatability for tetracycline degradation

Triphase photocatalytic hydrogel for molecule oxygen activation with enhanced interfacial electric field by Ti-O-Fe bridging bond

Solar-driven heterogeneous photocatalysis offers a green and sustainable approach for converting abundant O2 and H2O into reactive oxygen species (ROS), addressing key pollution control and energy storage challenges. However, traditional diphase photocatalytic systems face significant problems, including sluggish interfacial reaction kinetics, limited O2 diffusion, poor long-term stability, and recovery of catalyst. In this study, we constructed a composite MOF-on-MOF (NH2-MIL125(Ti)/NH2-MIL88B(Fe)) S-scheme heterojunction photocatalyst embedded in a cross-linked dual-network hydrogel (HG) composed of the carboxymethylcellulose (CMC) and polyvinyl alcohol (PVA), as a self-suspending triphase interfacial superwetting photocatalytic platform. Comprehensive experimental characterizations and theoretical calculations reveal that the atomic-level Ti-O-Fe bonding at the heterojunction interface facilitates efficient directional migration of photogenerated carriers. Moreover, the porous hydrogel structure significantly enhances O2 diffusion, mass transfer processes, and the conversion of O2 into highly oxidative ROS (H2O2, 1O2, •O2-, and •OH). Compared with the conventional diphase system, our triphasic platform achieves superior mass transfer efficiency and interfacial reaction kinetics, ensuring long-term stability in purifying diverse pollutants in natural water systems. These findings provide valuable insights into the rational design of efficient, stable, and scalable triphase photocatalytic systems.

Fibrous MoS2/Bi2S3/BiFeO3 ternary heterojunction boosts piezoelectric photocatalytic performance

Photocatalytic removal of antibiotic such as ciprofloxacin from polluted water is of great value for eco-environment protection. To further enhance the piezoelectric effect in photocatalysis, we designed and synthesized a ternary heterojunction piezoelectric photocatalyst through uniformly loading MoS2 nanosheets onto BiFeO3 (BFO) nanofibers, namely MoS2/Bi2S3/BFO. Piezoresponse force microscopy and Kelvin probe force microscopy demonstrated its enhanced piezoelectric properties, showing a maximum amplitude displacement of 395.51 pm under a voltage of 9.91 V and a surface potential difference of 66.50 mV. Finite element simulations indicated that the ternary heterojunction could achieve a larger piezoelectric potential. Piezoelectric photocatalytic degradation experiments revealed that MoS2/Bi2S3/BFO achieved a ciprofloxacin degradation efficiency of 96.6 % within 75 min, significantly higher than that of pure piezoelectric catalysis (25.5 %) and photocatalysis (60.5 %). Analysis of intermediate products and detection of active species (OH and O2-) during degradation suggested an S-Scheme migration pathway of photogenerated charge carriers, enhancing the piezoelectric photocatalytic performance of the material. This study provides an efficient ternary heterojunction composite piezoelectric photocatalyst for the antibiotic degradation and energy conversion, thus offers a new approach for developing novel BFO-based composite piezoelectric photocatalysts.

Piezocatalysis-combined advanced oxidation processes for organic pollutant degradation in water system

The piezoelectric catalyst process has emerged as a promising technology for energy harvesting, effectively converting natural mechanical energies, such as wind, water flow, and waves, into usable electrical energy using piezoelectric materials. In recent years, there has been a growing interest in applying this technology to water treatment to address environmental challenges. Concurrently, research efforts have focused on enhancing the efficiency of piezoelectric catalysis by integrating it with advanced oxidation processes (AOPs). This combination has demonstrated significantly better performance than traditional single-process methods. This review offers a comprehensive overview of the fundamental principles of piezocatalysis and explores the evolution of research in this field. It provides a detailed analysis of how piezocatalysis has been developed and applied, particularly in water treatment. The review also includes a comparative assessment of various processes used to remove organic pollutants from water, focusing on recent advancements that combine piezocatalysis with AOPs. Furthermore, the limitations of the current research were discussed, and future research directions were suggested based on the overall findings. By summarizing the progress and challenges in this area, the review aims to provide valuable insights and guide future studies to enhance the effectiveness and application of piezoelectric catalysis in environmental remediation.

Heterogeneous Interface Engineering of 2D Black Phosphorus-Based Materials for Enhanced Photocatalytic Performance

Photocatalysis has garnered significant attention as a sustainable approach for energy conversion and environmental management. 2D black phosphorus (BP) has emerged as a highly promising semiconductor photocatalyst owing to its distinctive properties. However, inherent issues such as rapid recombination of photogenerated electrons and holes severely impede the photocatalytic efficacy of single BP. The construction/stacking mode of BP with other nanomaterials decreases the recombination rate of carriers and extend its functionalities. Herein, from the perspective of atomic interface and electronic interface, the enhancement mechanism of photocatalytic performance by heterogeneous interface engineering is discussed. Based on the intrinsic properties of BP and corresponding photocatalytic principles, the effects of diverse interface characteristics (point, linear, and planar interface) and charge transfer mechanisms (type I, type II, Z-scheme, and S-scheme heterojunctions) on photocatalysis are summarized systematically. The modulation of heterogeneous interfaces and rational regulation of charge transfer mechanisms can enhance charge migration between interfaces and even maximize redox capability. Furthermore, research progress of heterogeneous interface engineering based on BP is summarized and their prospects are looked ahead. It is anticipated that a novel concept would be presented for constructing superior BP-based photocatalysts and designing other 2D photocatalytic materials.

Removal of sulfonamides by persulfate-based advanced oxidation: A mini review

Sulfonamides (SAs) are known for their persistence and have become one of the most frequently detected pharmaceuticals and personal care products (PPCPs) in the environments. The widespread presence of SAs in natural waters, wastewater, soil, and sediment has prompted growing concern due to their potential threats to both human health and ecological systems. Persulfate-based advanced oxidation processes (PS-AOPs) have emerged as a promising technology for effectively mitigating the presence of these pollutants in the environment. This review offers a comprehensive overview of the degradation of SAs by PS-AOPs. The various activation methods of persulfate for the purpose of removing SAs are elaborated upon in detail. The factors influencing the removal efficiency of SAs through PS-AOPs is thoroughly discussed. Additionally, the conceivable mechanisms and degradation pathways associated with various types of SAs are discussed. Lastly, existing challenges are identified, and future prospects pertaining to the utilization of PS-AOPs for efficient SA removal are presented.

Morphology Regulation and Oxygen Vacancy Construction Synergistically Boosting the Piezocatalytic Degradation and Pure Water Splitting of SrTiO3

In recent years, the development of high-efficiency piezoelectric materials is an effective means to make full use of the mechanical energy widely existing in the environment. However, there are few reports on multi-strategies synergistically improving piezocatalytic activity, and the mechanism of synergistic enhancement of piezocatalytic activity also receives less attention. Herein, the SrTiO3 nanorods decorated with tunable surface oxygen vacancy concentrations are prepared. Oxygen vacancy-optimized SrTiO3 nanorods exhibit efficient and undifferentiated piezocatalytic degradation activities for both anionic and cationic dyes under ultrasonic vibration. More importantly, it can split water into H2 and H2O2 with high production rates of 540 and 332 µmol g-1 h-1 without adding any sacrificial agents and cocatalysts, respectively. Mechanism analyses demonstrate that the 1D structure is beneficial to mechanical energy harvesting, and the surface oxygen vacancy induces larger surface asymmetry and piezoelectric response, synergically enhancing the piezocatalytic activity of SrTiO3 nanorods. In addition, metal deposition experiments under different conditions show that SrTiO3 nanorods possess abundant reactive catalytic sites in the piezocatalytic reaction process. This work provides a further understanding of piezocatalysis in piezoelectric nanomaterials and is important for the development of efficient piezoelectric catalysts.

Oxygen Vacancy Engineering and Constructing Built-In Electric Field in Fe-g-C3N4/Bi2MoO6 Z-Scheme Heterojunction for Boosting Photo-Fenton Catalytic Degradation Performance of Tetracycline

A novel Fe-g-C3N4/Bi2MoO6 (FCNB) Z-scheme heterojunction enriched with oxygen vacancy is constructed and employed for the photo-Fenton degradation of tetracycline (TC). The 2% FCNB demonstrates prominent catalytic performance and mineralization efficiency for TC wastewater, showing activity of 8.20 times greater than that of pure photocatalytic technology. Density-functional theory (DFT) calculations and degradation experiments confirm that the formation of Fe-N4 sites induces spin-polarization in the material, and the difference in Fermi energy levels results in the formation of built-in electric field at the contact interface, which facilitates the continuous generation and migration of photogenerated carriers to address the issue of insufficient cycling power of Fe (III)/Fe (II).The reactive radicals persistently target the extremely reactive sites anticipated by the Fukui function, causing the mineralization of TC molecules into "non-toxic" compounds through processes of hydroxylation, demethylation, and deamidation. This work holds significant importance in the domain of eliminating organic pollutants from water.

A comprehensive review of antibiotic resistance gene contamination in agriculture: Challenges and AI-driven solutions

Since their discovery, the prolonged and widespread use of antibiotics in veterinary and agricultural production has led to numerous problems, particularly the emergence and spread of antibiotic-resistant bacteria (ARB). In addition, other anthropogenic factors accelerate the horizontal transfer of antibiotic resistance genes (ARGs) and amplify their impact. In agricultural environments, animals, manure, and wastewater are the vectors of ARGs that facilitate their spread to the environment and humans via animal products, water, and other environmental pathways. Therefore, this review comprehensively analyzed the current status, removal methods, and future directions of ARGs on farms. This article 1) investigates the origins of ARGs on farms, the pathways and mechanisms of their spread to surrounding environments, and various strategies to mitigate their spread; 2) determines the multiple factors influencing the abundance of ARGs on farms, the pathways through which ARGs spread from farms to the environment, and the effects and mechanisms of non-antibiotic factors on the spread of ARGs; 3) explores methods for controlling ARGs in farm wastes; and 4) provides a comprehensive summary and integration of research across various fields, proposing that in modern smart farms, emerging technologies can be integrated through artificial intelligence to control or even eliminate ARGs. Moreover, challenges and future research directions for controlling ARGs on farms are suggested.

Co-grown novel S-scheme tubular P-UCN/S-TCN homojunction mediates photocatalysis-PMS activation synergistic system for efficient degradation of antibiotic

The low photogenerated carrier separation and transport ability of the photocatalyst are the main factors inhibiting the photocatalytic activity. The construction of composite photocatalysts can effectively improve the efficiency of photogenerated carriers. However, the problem of reduced photocatalyst stability and catalytic activity due to easy separation of unstable composite interfaces has not been well solved for a long time. Therefore, in this work, a co-growth strategy was put forward to thermally co-polymerize sulfur-containing tubular supramolecular precursors with urea in order to achieve the growth of porous g-C3N4 nanoparticles (P-UCN) on the sulfur-doped tubular g-C3N4 (S-TCN), thus to successfully prepare P-UCN/S-TCN homojunction photocatalysts with chemically bonded stable composite interfaces. Furthermore, a coupled photocatalytic-peroxymonosulfate (PMS) activation system was constructed to further promote the photogenerated carrier separation of P-UCN/S-TCN as well as the catalytic activity of the reaction system through the electron donor-acceptor relationship between P-UCN/S-TCN and PMS. Experimental characterization and DFT theoretical calculations together revealed the band gap structural characteristics and the direction of electron flow of the P-UCN/S-TCN S-scheme homojunction, and confirmed the successful construction of a stable chemically bonded homojunction interface. Then the results of catalytic activity test of P-UCN1/S-TCN1 showed a high tetracycline hydrochloride (TCH) degradation efficiency (93.5%) within 30 min, and also demonstrated 100% degradation efficiency for Rhodamine B (RhB). This work made important progress in the design of a novel stable S-scheme homojunction interface and provided a reference for the application of photocatalysis-PMS coupling system in environmental remediation.

Transcriptional dynamic changes in energy metabolism, protein synthesis and cell cycle regulation reveal the biological adaptation mechanisms of juvenile Acrossocheilus wenchowensis under acute temperature changes

In recent years, frequent acute temperature changes have posed a serious threat to the physiology and survival of fish. This study utilized RNA-Seq technology to analyze the transcriptional dynamics in the muscle tissues of Acrossocheilus wenchowensis under various acute temperature conditions (16◦C, 20◦C, 24◦C, 28◦C and 32◦C). Through comprehensive analysis, we identified 11509 differentially expressed genes (DEGs), a gene set (profiles 19) that was significantly up-regulated with increasing temperature, and two weighted gene co-expression network analysis (WGCNA) modules that were significantly correlated with acute temperature changes. Furthermore, we identified 28 transcription factors that are pivotal in oxidative stress and energy metabolism under acute temperature changes. Our results showed that, compared to the control group (24°C), KEGG functional enrichment analysis revealed significant enrichment of DEGs in the cell cycle, DNA replication, and p53 signaling pathway, with an overall trend of suppressed expression. This indicates that maintaining cell stability and reducing cell damage is an effective adaptive mechanism for A. wenchowensis to cope with acute temperature changes. Through STEM analysis and the black WGCNA module associated with high-temperature stress, we identified significant up-regulation of pathways and hub genes related to energy metabolism including oxidative phosphorylation, TCA cycle, purine metabolism, and glutathione metabolism, as well as the central roles of signal transduction pathways such as MAPK signaling pathway and AMPK signaling pathway, which synergistically regulate energy production. Under acute low-temperature stress, the turquoise WGCNA module highlighted significant up-regulation of hub genes associated with Ribosomal and Spliceosomal pathways related to protein synthesis and processing, as well as activation of calcium signaling pathways, which plays an important role in maintaining cellular function during low-temperature adaptation. These findings provide a critical theoretical and molecular basis for the adaptation of eurythermal fish to rapid temperature changes.

Visible light photocatalytic degradation of oxytetracycline hydrochloride using chitosan-loaded Z-scheme heterostructured material BiOCOOH/O-gC3N4

In this work, a Z-scheme heterostructured BiOCOOH/O-gC3N4 material was synthesized and immobilized on chitosan (CTS) to obtain the BiOCOOH/O-gC3N4/CTS photocatalytic material for photocatalytic degradation of oxytetracycline hydrochloride (CTC).Our findings indicate that the composite material BiOCOOH/O-gC3N4, as well as the BiOCOOH/O-gC3N4/CTS composite membrane, displayed a significantly higher efficiency in photocatalytic degradation of CTC compared to BiOCOOH alone, owing to the synergistic effect of adsorption and photocatalysis. Following four cycles of use, the composite material retained around 96 % of its initial photocatalytic degradation activity. The addition of CTS in the photocatalytic material resolved issues such as aggregation and difficult recovery commonly encountered with powder materials, thereby facilitating effective collision between the photocatalytic active sites and CTC. Experimental and theoretical calculations provided confirmation that the combination of BiOCOOH and O-gC3N4 effectively enhanced the light absorption capacity and photocatalytic performance. Furthermore, we investigated the influence of environmental factors such as pH value and anions on the photocatalytic degradation experiment, which offers valuable insights for the application of composite catalysts in wastewater treatment.

Adsorption and photocatalytic degradation of 2,4-dicholrophenol using surgical mask derived SMAC-Fe2O3 composite; adsorption isotherms, kinetics, thermodynamics

Hybrid material of surgical mask activated carbon (SMAC) and Fe2O3 (SMAC-Fe2O3) composite was prepared by simple co-precipitation method and used as potential material for the remediation of 2,4-dicholrophenol (2,4-DCP). The XRD patterns exhibited the presence of SMAC and Fe2O3, FTIR spectrum showed the FeO-carbon stretching at the wavenumber from 400 to 550 cm-1. UV-Vis DRS results showed the band gap was 1.97 eV and 2.05 eV for SMAC-Fe2O3 and Fe2O3, respectively. The SEM images revealed that the Fe2O3 doped onto the fiber morphology of SMAC. The outcomes of the BET examination exhibited a surface area of 195 m2/g and a pore volume of 0.2062 cm3/g for the SMAC/Fe2O3 composite. The batch mode study shows the maximum adsorption and photocatalytic degradation efficacies which were 97% and 78%, respectively. The experimental data was studied with both linear and nonlinear adsorption isotherm and kinetics models. The nonlinear Langmuir isotherm and pseudo-second-order kinetics (PSOK) models have well fit compared with other models. The Langmuir maximum adsorption capacity (qmax) was found 161.60 mg/g. Thermodynamic analysis shows that the 2,4-DCP adsorption onto SMAC-Fe2O3 was a spontaneous and exothermic process. The PSOK assumes that the adsorption process was chemisorption. The photocatalytic degradation rate constant of 2,4-DCP was calculated using pseudo-first-order kinetics (PFOK) and the rate constant for SMAC-Fe2O3 and Fe2O3 were 0.859 × 10-2 min-1 and 0.616 × 10-2 min-1, correspondingly. In addition, the obtained composite exhibited good reusability after a few cycles. These results confirmed that SMAC-Fe2O3 composite is an effective adsorbent and photocatalyst for removing 2,4-DCP pollutants.

Broad-spectrum hybrid-driven triple-interface Z-Scheme 1T/2H phase sailboat-like molybdenum disulfide (MoS2)/protonated N-defect nanoporous graphitic carbon nitride (g-C3N4) nanosheets piezo-photocatalyst: Superior degradation and hydrogen evolution

Incorporating piezo-response into photocatalysis holds great promise for eco-friendly strategies in environmental remediation and sustainable energy conversion. Herein, flexible N-defect nanoporous g-C3N4 nanosheets (NPCNs) was prepared via one-step method, then whose surface was protonated. And existed dense 1T/2H phase and vertical interfaces in non-layer-dependent-piezo-response sailboat-like-MoS2 (Sv-MS) formed by in-situ stresses during nucleation and growth by experiments and MD-simulations. Noble-metal-free Z-scheme PC/VM heterojunction with broad-spectrum absorption, enhanced piezo-response and intimate triple-interface was established by electrostatic self-assembly, performing efficient hybrid-driven piezo-photocatalysis. With a systematic modification of morphology, grain size, phase composition, and surface condition of the components, the optimal PC(3.6H)/VM(u2) exhibited high piezo-photocatalytic rates for degradation of organic dyes and antibiotic (RhB (0.565 min-1), MO (0.052 min-1), MB (1.557 min-1), TC (0.062 min-1)) and hydrogen evolution (3528 μmolg-1h-1) under visible-light and ultrasonic-wave, with maintenance under NIR-light (λmax = 1000 nm) attributed to up-conversion effect (RhB: 0.212 min-1, H2: 2355 μmolg-1h-1). Furthermore, the piezo-photocatalytic mechanism was proposed by experiments and DFT-calculations for effective triple-interface Z-Scheme charge migration. This work provides a rational protocol for constructing diverse-energy-triggered, multiple-interfaces and broad-solar-spectrum (UV-Vis-NIR) piezo-photocatalysts in degradation and hydrogen evolution.

Recent advances in catalyst design, performance, and challenges of metal-heteroatom-co-doped biochar as peroxymonosulfate activator for environmental remediation

The escalation of global water pollution due to emerging pollutants has gained significant attention. To address this issue, catalytic peroxymonosulfate (PMS) activation technology has emerged as a promising treatment approach for effectively decontaminating a wide range of pollutants. Recently, modified biochar has become an increasingly attractive as PMS activator. Metal-heteroatom-co-doped biochar (MH-BC) has emerged as a promising catalyst that can provide enhanced performance over heteroatom-doped and metal-doped biochar due to the synergism between metal and heteroatom in promoting PMS activation. Therefore, this review aims to discuss the fabrication pathways (i.e., internal vs external doping and pre-vs post-modification) and key parameters (i.e., source of precursors, synthesis methods, and synthesis conditions) affecting the performance of MH-BC as PMS activator. Subsequently, an overview of all the possible PMS activation pathways by MH-BC is provided. Subsequently, Also, the detection, identification, and quantification of several reactive species (such as, •OH, SO4•-, O2•-, 1O2, and high valent oxo species) generated in the catalytic PMS system by MH-BC are also evaluated. Lastly, the underlying challenges associated with poor stability, the lack of understanding regarding the interaction between metal and heteroatom during PMS activation and quantification of radicals in multi-ROS system are also deliberated.

Dynamic Reconfiguration and Local Polarization of NiFe-Layered Double Hydroxide-Bi2MoO6- x Heterojunction for Enhancing Piezo-Photocatalytic Nitrogen Oxidation to Nitric Acid

Constructing heterojunctions with vacancies has garnered substantial attention in the field of piezo-photocatalysis. However, the presence of interfacial vacancies can serve as charge-trapping sites, leading to the localization of electrons and hindering interfacial charge transfer. Herein, dual oxygen vacancies in the NiFe-layered double hydroxide and Bi2MoO6- x induced interfacial bonds have been designed for the piezo-photocatalytic N2 oxidation to NO3 -. Fortunately, it achieves sensational nitric acid production rates (7.23 mg g-1 h-1) in the absence of cocatalysts and sacrificial agents, which is 6.03 times of pure Bi2MoO6 that under ultrasound and light illumination. Theoretical and experimental results indicate that interfacial bonds act as "charge bridge" and "strain center" to break the carrier local effect and negative effects with piezocatalysis and photocatalysis for promoting exciton dissociation and charge transfer. Moreover, the strong electronic interaction of the interfacial bond induces internal reconstruction under ultrasound for promoting the local polarization and adsorption of N2, which accelerates the fracture of the N≡N bonds and reduces the activation energy of the reaction. The research not only establishes a novel approach for optimizing the combined effects of piezo-catalysis and photocatalysis, but also achieves equilibrium between the synergistic impacts of vacancies and heterojunctions.

Recent advances of piezo-catalysis and photocatalysis for efficient environmental remediation

The efficient degradation of organic pollutants in diverse environmental matrices can be achieved through the synergistic application of piezo-catalysis and photocatalysis. The focus of this study is on understanding the fundamental principles and mechanisms that govern the collaborative action of piezoelectric and photocatalytic materials. Piezoelectric nanomaterials, under mechanical stress, generate piezo-potential, which, when coupled with photocatalysts, enhances the generation and separation of charge carriers. The resulting cascade of redox reactions promotes the degradation of a wide spectrum of organic pollutants. The comprehensive investigation involves a variety of experimental techniques, including advanced spectroscopy and microscopy, to elucidate the intricate interplay between mechanical and photoinduced processes. The influence of key parameters, such as material composition, morphology, and external stimuli on the catalytic performance, is systematically explored. This study contributes to the increasing knowledge of environmental remediation and lays the foundation for the development of advanced technologies using piezo and photocatalysis for sustainable pollutant removal.

Preparation of Heterogeneous Fenton Catalysts Cu-Doped MnO2 for Enhanced Degradation of Dyes in Wastewater

Herein, a series of heterogeneous Fenton catalysts, Cu doped MnO2 (CDM), with different Cu/Mn molar ratios were prepared via a hydrothermal reaction. Meanwhile, detailed characterizations were used to study the structures of CDM, and it is amazing that the morphology of CDM changed from nanowires to nanoflowers with an increasing amount of Cu doped. Apart from this, both the specific surface area and oxygen vacancy increased obviously with the increasing Cu/Mn molar ratio. Then, the degradation of different dyes was utilized to evaluate the catalytic activity of different CDM with H2O2 used as the oxidizing agent, and the 50%-CDM with the highest content of Cu doped displayed the best catalytic activity. Herein, the degradation efficiency (D%) of Congo red (CR) solution with low concentration (60 mg/L) reached 100% in 3 min, while the D% of CR solution with a high concentration (300 mg/L) reached 99.4% after 5 min with a higher dosage of H2O2. Additionally, the 50%-CDM also displayed excellent reusability, for which the D% values were still higher than 90% after the 14th cycles. Based on the structure characteristics and mechanism analysis, the excellent catalytic capacity of 50%-CDM was due to the combined influence of large specific surface area and abundant oxygen vacancy. Thus, a promising heterogeneous Fenton catalyst was developed in this study, which proved the treatment efficiency of actual dye wastewater.

Molecular oxygen activation: Innovative techniques for environmental remediation

Molecular oxygen as a green, non-toxic, and inexpensive oxidant has displayed numerous advantages compared with other oxidants for more sustainable and environmentally benign pollutant degradation. Molecular oxygen activation stands as a groundbreaking approach in advanced oxidation processes, offering efficient environmental remediation with minimal environmental impact with the production of high-oxidation reactive oxygen species (ROS). The adaptability and energy efficiency of molecular oxygen activation significantly contribute to the progression of sustainable water remediation technologies. This review meticulously explores the principles and mechanisms of molecular oxygen activation, shedding light on the diverse ROS production pathways. Subsequently, this review comprehensively details contemporary activation approaches, including photocatalytic activation, electrocatalytic activation, piezoelectric activation, and photothermal activation, explicating their distinct activation mechanisms. Additionally, it delves into the promising applications of molecular oxygen activation in the degradation of water pollutants, primary air pollutants, and volatile organic compounds, providing an in-depth analysis of the associated degradation pathways and mechanisms. Moreover, this review also addresses the imminent challenges and emerging opportunities in environmental remediation. It is envisioned that this comprehensive analysis will spur ongoing exploration and innovation in the use of molecular oxygen activation for environmental remediation and beyond.

Decoration of 0D Bi3NbO7 nanoparticles onto 2D BiOIO3 nanosheets as visible-light responsive S-scheme photocatalyst for photo-oxidation of antibiotics in wastewater

In this work, a new S-type hybrid composed of 2D BiOIO3 and 0D Bi3NbO7 was proposed and hybridized by a facile self-assembly strategy. The developed nanomaterials were characterized and identified by a series of sophisticated analyses, like XRD, SEM, EIS, XPS, PL, UPS, EDS, BET, M-S, TEM, HRTEM, and DRS. The photocatalytic behavior of BiOIO3/Bi3NbO7 was examined and optimized against amoxicillin (AMX) and other types of antibiotics under a variety of environmental conditions, such as visible light (150 W LED), direct sunlight, pH (3-11), catalyst dosages (20-80 mg), humic acid (0-24 mg/L), AMX concentration (10-40 mg/L), and different inorganic ions (0.05 M). The optimized BiOIO3/Bi3NbO7 hybrid attained exceptional AMX degradation activity (96.5%) under visible light (60 min), with a reaction constant of up to 0.04559 min-1, exceeding bare BiOIO3 and Bi3NbO7 by 5.57 and 5.3 folds, respectively. The obtained BiOIO3/Bi3NbO7 hybrid unclosed expanded light utilization behavior compared with neat catalysts, which originates from the powerful incorporation between BiOIO3 and Bi3NbO7 in the S-type system. The radical investigations confirmed the superiority of BiOIO3/Bi3NbO7 in generating both •OH and •O2- during the photoreaction. The novel Bi3NbO7-based heterojunction afforded robust photostability in five treatment cycles and simple charge transfer activity in the S-type route, boosting the photo-mechanism for antibiotic degradation in an efficient manner. The building of the S-scheme heterojunction between BiOIO3 and Bi3NbO7 stimulates the utilization of holes by the recombination process and promotes the overall stability of the composite. Our study introduces a new class of semiconductor heterojunctions that may contribute to the development potential of the photocatalysis sector in wastewater treatment.

A comprehensive review on the application of semiconducting materials in the degradation of effluents and water splitting

In this comprehensive review article, we delve into the critical intersection of environmental science and materials science. The introduction sets the stage by emphasizing the global water shortage crisis and the dire consequences of untreated effluents on ecosystems and human health. As we progress into the second section, we embark on an intricate exploration of piezoelectric and photocatalytic principles, illuminating their significance in wastewater treatment and sustainable energy production. The heart of our review is dedicated to a detailed analysis of the detrimental impacts of effluents on human health, underscoring the urgency of effective treatment methods. We dissected three key materials in the realm of piezo-photocatalysis: ZnO-based materials, BaTiO3-based materials, and bismuth-doped materials. Each material is scrutinized for its unique properties and applications in the removal of pollutants from wastewater, offering a comprehensive understanding of their potential to address this critical issue. Furthermore, our exploration extends to the realm of hydrogen production, where we discuss various types of hydrogen and the role of piezo-photocatalysis in generating clean and sustainable hydrogen. By illuminating the synergistic potential of these advanced materials and technologies, we pave the way for innovative solutions to the pressing challenges of water pollution and renewable energy production. This review article not only serves as a valuable resource for researchers and scholars in the fields of material science and environmental engineering but also underscores the pivotal role of interdisciplinary approaches in addressing complex global issues.

Bagasse cellulose-based S-type Bi2O3/Zn3In2S6 photocatalyst for efficient and stable degradation of 2,4-dichlorophenol under visible light

The environmental and human health hazards posed by 2,4-dichlorophenol (2,4-DCP) call for effective degradation technologies. This research investigates the design and application of a Bi2O3/Zn3In2S6 heterojunction photocatalyst, a 'S scheme', which was constructed via a simple hydrothermal method. The photocatalyst was then embedded in a sugarcane bagasse cellulose carrier (SBC/BO/ZIS), demonstrating excellent 2,4-DCP degradation capacity. The results show that S-type Bi2O3/Zn3In2S6 promotes the separation of photogenerated carriers. The SBC/BO/ZIS complex, in comparison with Bi2O3 and Zn3In2S6 alone, amplifies specific surface area (91.7880 m2/g) and broadens the light absorption range (570 nm) of materials, showing robust photocatalytic performance. The degradation rate of 50 mg/L 2,4-DCP reached an impressive 97% within 120 min. The encapsulation of BO/ZIS in SBC not only increases the efficiency of material recovery and recycling but also allows for continuous degradation of 2,4-DCP in cyclic manners, maintaining a degradation rate between 90% and 97%. XRD characterization shows that the physical properties of the material are not affected. The degradation of 2,4-DCP was dominantly controlled by active species (·OH and ·O2-) identified by electron paramagnetic resonance analysis and free radical trapping experiments. This innovative design significantly enhances sunlight utilization and effectively curbs charge carrier recombination, while also promoting material recovery and utilization. These attributes establish a foundation for a cost-effective and efficient means of treating actual wastewater containing 2,4-DCP.

Green synthesis of rectangular hollow tubular carbon nitride via in-situ self-assembly strategy to enhance the degradation of tetracycline hydrochloride under visible light irradiation

It has been an urgent requirement for materials with remarkable performance in the photocatalytic degradation of organic contaminants by photocatalytic technology. Limited surface area and speedy recombination rate of photogenerated charge carriers seriously restrain the application of g-C3N4. Morphology control is a powerful approach to enhance the photocatalytic efficiency of g-C3N4. Herein, we reported a method to attain graphitic carbon nitride with rectangular hollow tubular morphology and asperous surface (TUM-CN-2) which is prepared from urea-melamine hydrothermal products and trithiocyanuric acid by self-assembling without using organic solvents or template agents. The specific surface area, photocatalytic activity, and photo-generated carriers migration and separation rate of the obtained photocatalyst TUM-CN-2 are vastly improved. Contrasted with pure g-C3N4, the degradation rate of tetracycline hydrochloride (TCH) and Rhodamine B (RhB) was enhanced about 3.04 and 13.96 times in visible light irradiation, respectively. Moreover, the interference parameters, active free radicals, potential degradation mechanism, and degradation paths of TCH were researched systematically. This work provides a green way to acquire the modified g-C3N4 with splendid catalytic activity through the self-assembly method.

Oxygen Vacancy-Enhanced Centrosymmetric Breaking of SrFeO3- x for Piezoelectric-Catalyzed Synthesis of H2 O2

Normally, only noncentrosymmetric structure of the materials can potentially be piezoelectric. Thus, it is limited in the field of piezoelectricity for the centrosymmetric structure of the material. In this work, the performance of piezoelectricity is successfully achieved from centrosymmetric SrFeO3- x by modulating oxygen vacancies, which have a surface piezoelectric potential up to 93 mV by using Kelvin-probe force microscopy (KPFM). Moreover, the piezoelectric effects of SrFeO3- x are also evaluated by piezoelectric catalytic effect and density functional theory calculations (DFT). The results show that the piezo-catalytic degradation of tetracycline reaches 96% after 75 min by ultrasonic mechanical vibration and the production of H2 O2 by SrFeO3- x piezoelectric synthesis could reach 1821 µmol L-1 . In addition, the DFT results indicate that the intrinsic effect of oxygen vacancies effectively promotes the adsorption and activation of O2 and H2 O as well as intermediates and improves the piezoelectric catalytic activity. This work provides an effective basis for realizing the piezoelectricity of centrosymmetric materials and regulating the development of piezoelectric catalytic properties.

Novel GdTaO4 phase for efficient photocatalytic degradation of organic dye under visible light irradiation: An X-ray spectroscopic investigation

The novel GdTaO4 phase exhibits good photocatalytic activity under visible light irradiation and holds great promise for the removal of organic dyes from industrial wastes. The GdTaO4 samples were synthesized using the hydrothermal and calcination process with different weight ratios of gadolinium nitrate hydrate (G) and tantalum pentachloride (T), and their structural studies confirmed the formation of the GdTaO4 (GT) phase. Among the samples, GT-4 (with a weight ratio of 4:1) exhibited the highest photocatalytic activity for the degradation of Methyl Orange (MO) dye under visible light irradiation. To enhance the photocatalytic performance, H2O2 was used as a green additive, and the photocatalytic abilities were examined by varying dye types and concentrations. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) revealed the local atomic and electronic structures around Ta and Gd and highlighted the contribution of Gd3+ to the GT system, which is a crucial factor in supporting the enhanced photocatalytic performance. Moreover, in-situ XAS at Gd M5-edge and O K-edge were examined under illumination/dark conditions to explore the electronic structures of photo-excited electron transition in the photocatalytic process. The analytical results provided strong evidence correlating the electronic structure and photocatalytic property of the GT. This study demonstrates that GdTaO4 exhibits good photocatalytic activity under visible light irradiation, making it a promising new Ta-based photocatalyst for the effective removal of organic dyes from industrial wastes.

Highly efficient ultrasound-driven Cu-MOF/ZnWO4 heterostructure: An efficient visible-light photocatalyst with robust stability for complete degradation of tetracycline

Metal-organic frameworks (MOFs) are a significant class of porous, crystalline materials composed of metal ions (clusters) and organic ligands. The potential use of copper MOF (Cu-BTC) for the sonophotocatalytic degradation of Tetracycline (TC) antibiotic was investigated in this study. To enhance its catalytic efficiency, S-scheme heterojunction was created by combining Cu-BTC with Zinc tungstate (ZnWO4), employing an ultrasound-assisted hydrothermal method. The results demonstrated that the Cu-BTC/ZnWO4 heterojunction exhibited complete removal of TC within 60 min under simultaneous irradiation of visible light and ultrasound. Interestingly, the sonophotocatalytic degradation of TC using the Cu-BTC/ZnWO4 heterojunction showed superior efficiency (with a synergy index of ∼0.70) compared to individual sonocatalytic and photocatalytic degradation processes using the same heterojunction. This enhancement in sonophotocatalytic activity can be attributed to the formation of an S-scheme heterojunction between Cu-BTC and ZnWO4. Within this heterojunction, electrons migrated from Cu-BTC to ZnWO4, facilitated by the interface between the two materials. Under visible light irradiation, the built-in electric field, band edge bending, and coulomb interaction synergistically inhibited the recombination of electron-hole pairs. Consequently, the accumulated electrons in Cu-BTC and holes in ZnWO4 actively participated in the redox reactions, generating free radicals that effectively attacked the TC molecules. This study offers valuable perspectives on the application of a newly developed S-scheme heterojunction photocatalyst, demonstrating its effectiveness in efficiently eliminating diverse recalcitrant pollutants via sonophotocatalytic degradation.

Co-construction of oxygen doping and van der walls heterojunction in O-CB/ZnIn2S4 promoting photocatalytic production and activation of H2O2 for the degradation of antibiotics

The in situ production of H2O2 by photocatalysis have shown a sustainable strategy for water remediation, but the peroxide evolution capacity are still unsatisfactory. Herein, we ingeniously design oxygen-doped carbon black/zinc indium sulfide (O-CB/ZnIn2S4) composites for photocatalytic production and activation of H2O2 to degrade antibiotics. The rich oxygen dopants and van der walls heterojunction between O-CB and ZnIn2S4 promoted charge transfer, oxygen adsorption and reduction for peroxide generation. The optimized O-CB/ZnIn2S4-2 composites exhibited ultrahigh H2O2 production rate (1985 μmol/g/h) in pure water (pH=7) without sacrificial reagents and aeration assistance, which was 2 times, 3 times, and 12 times higher than CB/ZnIn2S4-2, ZnIn2S4 and O-CB, respectively. Additionally, O-CB/ZnIn2S4-2 composites exhibited considerable amount of OH of 30 μmol/L in 60 min, which was originated from the reduction of innergenerate-H2O2 by photogenerated electrons and direct photolysis. The degradation and quenching experiments shows that the innergenerate-H2O2 contributed to the rapid degradation and deep mineralization of tetracycline antibiotics(tetracycline, oxytetracycline, chlortetracycline hydrochloride). Moreover, intermediates analysis and toxicity estimation further confirm the significant mineralization and toxicity decrease during the degradation of oxytetracycline by O-CB/ZnIn2S4-2. The work provides deep insights into the crucial role of dopants and heterojunction in promoting H2O2 production and activation.

Synergistic enhancement of redox pairs and functional groups for the removal of phenolic organic pollutants by activated PMS using silica-composited biochar: Mechanism and environmental toxicity assessment

In present work, a novel catalyst of cobalt supported on silica-composited biochar (Co@ACFA-BC) derived from fly ash and agricultural waste was synthesized. A series of characterizations confirmed that Co3O4 and Al/Si-O compounds were successfully embedded on the surface of biochar, which triggered superior catalytic activity for PMS activation towards phenol degradation. Particularly, the Co@ACFA-BC/PMS system could completely degrade phenol in the wide pH range, and was almost unaffected by environmental factors including humic acid (HA), H2PO4-, HCO3-, Cl-, and NO3-. Further quenching experiment and EPR analysis proved that both radical (SO4·-, ·OH, O2·-) and non-radical (1O2) pathways were involved in the catalytic reaction system, and the excellent PMS activation was attributed to the electron pair cycling of Co2+/Co3+ and the active sites provided by Si-O-O and Si/Al-O bonds on the catalyst surface. Meanwhile, the carbon shell effectively inhibited the leaching of metal ions, enabling the Co@ACFA-BC catalyst to maintain excellent catalytic activity after four cycles. Finally, biological acute toxicity assay demonstrated that the toxicity of phenol could be significantly reduced after being treated by Co@ACFA-BC/PMS. Overall, this work provides a promising strategy for solid waste valorization and a feasible methodology for green and efficient treatment of refractory organic pollutants in water environment.

Chalcopyrite as an oxidants activator for organic pollutant remediation: A review of mechanisms, parameters, and future perspectives

Advanced oxidation processes (AOPs) based on oxidants have attracted attention for the degradation of organic pollutants. The combination of chalcopyrite with oxidants such as persulfate, peroxide, percarbonate, and others shows promise as a system due to its ability to activate through various pathways, leading to the formation of numerous radical and non-radical species. In this review, the generation of sulfate radical (SR) and hydroxyl radical (HR) in AOPs were summarized. The significance of chalcopyrite in various approaches including Fenton, photo-Fenton, and photo/Fenton-like methods, as well as its involvement in electrochemical Fenton-based processes was discussed. The stability and reusability, toxicity, catalyst mechanism, and effects of operational parameters (pH, catalyst dosage, and oxidant concentration) are evaluated in detail. The review also discusses the role of Fe2+/3+, Cu1+/2+, S2- and Sn2- present in CuFeS2 in the generation of free radicals. Finally, guidelines for future research are presented in terms of future perspectives.

Rational regulation of peroxymonosulfate activation over porous Co3O4 with carbon coating to boost utilization efficiency of peroxymonosulfate and achieve rapid removal of pollutants

It is of great significance to regulate rationally the activation mechanism of persulfate for promoting the development of sulfate radical-based advanced oxidation processes in wastewater treatment. Herein, carbon coated porous Co₃O₄ with hollow structure was synthesized. Notably, the formation of porous hollow structure improved specific surface area of Co₃O₄ and offered more redox couples of Co²⁺/Co³⁺, thereby reducing electron transfer resistance. Thus, the generation of reactive oxygen species and the role of high-valent transition metal complexes (namely Co₃O₄Co⁴⁺) were improved. The formation of carbon layer on the Co₃O₄ surface can avoid the release of Co ion during reaction process. Benefiting from the role of carbon layer in electron transport, catalyst-mediated the direct electron transfer from pollutant to PMS was boosted. Radical and nonradical pathways worked in coordination each other and realized the rapid removal of various organic pollutants in the presence of a little PMS. In short, current work revealed that modulating rationally the microstructure of catalyst was an efficient strategy for achieving controllable regulation of PMS activation process. More significantly, whether the direct electron transfer process can occur or not depended on both catalyst structure and electronic density of pollutants.

Recycling waste engine oil as a viscosity reducer for asphalt rubber: an insight from molecular dynamics simulations and laboratory tests

Traditional asphalt rubber (AR) has a high viscosity and poor fluidity, which makes its construction very difficult. Reducing viscosity has been identified as one of the effective way of solving these problems. Meanwhile, the mass production and improper discharge of waste engine oil (WEO) have a serious impact on the ecological environment, and its rational reuse needs to be addressed. In this paper, molecular models of AR and WEO-modified asphalt rubber (WEOMAR) was established by molecular dynamics (MD) simulations. The influence of WEO on asphalt component's behavior was studied by radial distribution function (RDF) and diffusion coefficient (D). Then, the microscopic mechanism of viscosity reduction was evaluated. Furthermore, the viscosity reduction behavior of WEO in AR was analyzed and verified by basic properties and low field nuclear magnetic resonance (LF-NMR) laboratory tests. The results showed that the RDF peak value of rubber molecules in WEOMAR is 14.07 higher than that of AR, at r = 2.16 Å. The D of saturated and aromatic components in WEOMAR obviously increased by 140% and 67.9%, respectively. The light component molecules increased after adding WEO into AR. The rubber molecule reduces the contact with asphaltene and resin, and the viscosity of AR is significantly reduced, which is confirmed by the macro tests.

Bacterial mobility and motility in porous media mimicked by microspheres

Bacterial motion in porous media is essential for their survival, proper functioning, and various applications. Here we investigated the motion of Escherichia coli bacteria in microsphere-mimicked porous media. We observed reduced bacterial velocity and enhanced directional changes of bacteria as the density of microspheres increased, while such changes happened mostly around the microspheres and due to the collisions with the microspheres. More importantly, we established and quantified the correlation between the bacterial trapping in porous media and the geometric confinement imposed by the microspheres. In addition, numerical simulations showed that the active Brownian motion model in the presence of microspheres resulted in bacterial motion that are consistent with the experimental observations. Our study suggested that it is important to distinguish the ability of bacteria to move easily - bacterial mobility - from the ability of bacteria to move independently - bacteria motility. Our results showed that bacterial motility remains similar in porous media, but bacterial mobility was significantly affected by the pore-scale confinement.

Dual S-scheme ZnO–g-C3N4–CuO heterosystem: a potential photocatalyst for H2 evolution and wastewater treatment

A ZnO–g-C3N4–CuO catalyst prepared by an ecofriendly solution combustion process is used for H2 evolution. The mechanism of H2 evolution over ZnO–g-C3N4–CuO is described under visible light illumination.

Recent progress in semiconductor/graphene photocatalysts: synthesis, photocatalytic applications, and challenges

The presence of an increasing number of organic pollutants in water now poses serious risks to both human health and ecological systems. Many of these pollutants are persistent and non-biodegradable. The contamination of fresh water by harmful substances has compelled researchers to develop innovative, efficient, and cost-effective water remediation techniques and materials. Thus, photocatalysis has long been recognized as a promising approach to tackle both environmental remediation and the energy crisis. However, semiconductor photocatalysts frequently suffer from defects such as photo-generated charge carrier recombination, poor visible light response, and slow surface reaction kinetics, which can be remedied by modifications with appropriate co-catalysts. Therefore, graphene and its derivatives have widely been used as supports for semiconductors and photocatalysts due to their distinctive optical, physicochemical, and electrical features. This critical review addresses the current progress in the design and synthesis of graphene/semiconductor photocatalysts, as well as their use in photocatalytic degradation of organic pollutants and hydrogen production. Several influencing parameters are addressed, including pH, photocatalyst loading, initial pollutant concentration, light wavelength, and oxidizing species, all of which could have a significant impact on the rate of organic pollutant's degradation. Furthermore, the recyclability of the catalyst and its photocatalytic activity mechanisms are thoroughly discussed. Numerous case studies are systematically presented. Moreover, future prospects and major challenges are highlighted.