An ecotoxicological perspective of microplastics released by face masks

Revealing the neurodevelopmental toxicity of face mask-derived microplastics to humans based on neural organoids

The massive use of face masks during and after the COVID-19 pandemic has raised global concerns about environmental issues. Microplastics released from face masks pose great threats to ecosystems and human health. However, the potentially hazardous effects of face mask-derived microplastics (FMMs) on humans remain poorly understood. Using neural organoid models aims to reveal the toxicity of FMMs to human early neural development. Retinal organoids derived from human embryonic stem cells were exposed to FMMs for 21 days during early retinogenesis. FMMs were internalized by retinal organoids. Exposure to FMMs disrupted the growth and development of retinal organoids in dose- and time-dependent manners, as evidenced by abnormal morphologies. Aberrant cell events, such as cell proliferation, apoptosis, and differentiation contributed to the disarrangement of the neural retina. Transcriptome data proved that the neurotoxicity of FMMs was closely related to disordered neurogenesis, anatomical structure morphogenesis, and axon guidance. Co-exposure to triphenyl phosphate (a common organophosphate flame retardant) and FMMs exhibited more pronounced neurotoxicity than FMM exposure alone. These findings are expected to uncover the potential threats of FMMs to human neurodevelopment and emphasize the importance of optimizing the management and safe disposal of used face masks.

Leachate from Weathered Face Masks Increases DNA Damage to Sperm of Sand Dollars Scaphechinus mirabilis

The COVID-19 pandemic has exacerbated the problem of environmental contamination of disposable personal protective equipment, in particular face masks (FMs). As a result of environmental factors, FMs undergo aging and fragmentation processes and become a source of microplastics (MPs) and chemical additives. Taking into account the scale of accumulation of used FMs and their fragments in the coastal zone, it should be expected that the most appreciable ecotoxicological consequences should be observed in hydrobionts inhabiting coastal ecosystems. Based on this, the aim of this study was to investigate the toxicity of leachates from pristine and weathered FMs using sperm of sand dollars Scaphechinus mirabilis. In our work, we used pristine and weathered FMs, which for 200 days were kept in the external environment under natural conditions and exposed to a complex of climatic factors. Fourier transform infrared spectroscopy was used to characterize the chemical changes that occurred in the polymer structure of FMs during this period. It follows from the results obtained that leachates from pristine and weathered FMs reduced sperm viability; stimulated the accumulation of lipid peroxidation products, such as malondialdehyde (MDA); and significantly increased the destruction of DNA molecules, showing a genotoxic effect. Overall, our results complement the limited experimental data presented, indicating the genotoxic properties of face mask extracts.

Do We Need Titanium Dioxide (TiO2) Nanoparticles in Face Masks?

The use of face masks has proven to be an effective preventive measure during the COVID-19 pandemic. However, concerns have emerged regarding the safety of metal (nano)particles incorporated into face masks for antimicrobial purposes. Specifically, this review examines the risks associated with TiO2 nanoparticles (NPs), which are classified as a possible human carcinogen. The inhalation of TiO2 NPs can cause multiple adverse effects, including oxidative stress, pulmonary inflammation, histopathological changes, and (secondary) genotoxicity. Different aspects are discussed, such as the composition and filtration efficiency of face masks, the antimicrobial mode of action and effectiveness of various metals, and the hazards of TiO2 NPs to human health, including exposure limits. A conservative risk assessment was conducted using different worst-case scenarios of potential (sub)chronic TiO2 exposure, derived from published leaching experiments. Most face masks are considered safe, especially for occasional or single use. However, the nanosafety of a minority of face masks on the European market may be inadequate for prolonged and intensive use. Important uncertainties remain, including the risks of combined exposure to TiO2 NPs and silver biocides, and the lack of direct exposure measurements. Considering the potential safety issues and the limited added protective value of TiO2 NPs, it is recommended to ban all applications of TiO2 in face masks based on the precautionary principle.

Fabrication of microplastic-free biomass-based masks: Enhanced multi-functionality with all-natural fibers

With the coronavirus-2019 epidemic, disposable surgical masks have become a common personal protective necessity. However, off-the-shelf masks have low filtration efficiency and short service life and can only physically isolate pathogens, easily leading to secondary infection and cross-infection between users. Additionally, they produce debris and microplastics, which can be inhaled by the human body and cause serious diseases. To address this, this study introduced a brand-new, microplastic-free, long-life, biodegradable, self-disinfecting, and gas-sensitive mask made of basal dialdehyde-chitosan crosslinked animal-collagen/plant composite fibers (CP-Mask) with an asymmetric bilayer structure using scalable paper-processing technology. The CP-Mask demonstrated outstanding filtration performance (95.9 %) for particulate matter with various sizes and constantly maintained filtration efficiency even after 20 friction cycles. The CP-Mask also exhibited stable and lasting antibacterial properties, with significant inhibition rates of 99.21 % for Staphylococcus aureus and 98.86 % for Escherichia coli and could effectively filter bacterial aerosols. In addition, CP-Mask realized the real-time detection of respiratory ammonia concentration and timely identified the ammonia level. The average response value was 68.26 %, and the average response time was 159.3 s, presenting good circulatory stability and is suitable for early diagnosis of ammonia-related diseases. Breakthrough, the origin of natural ingredients, fundamentally makes CP-Mask less likely to emit microplastics than commercially available masks and endows it with complete biodegradability in soil within three months, eliminating the risk of microplastic inhalation from the source. The proposed CP-Mask provides a new idea to facilitate personal health monitoring and portability of medical protection equipment regarding biocompatibility, biodegradability, self-disinfection, and ammonia sensing ability.

Toxicological impacts of plastic microfibers from face masks on Artemia salina: An environmental assessment using Box-Behnken design

An increase in global plastic manufacturing and subsequent disposal has resulted in widespread increase in microplastic pollution. Particularly, the post-COVID surge in face mask usage has introduced significant volumes of synthetic plastic microfibers into the environment, posing new ecological risks. Present study examines the toxicological impacts of face mask derived microfibers on Artemia salina, a key marine zooplankton species, using the Box-Behnken design to assess the effects of microfiber dosage (0.1 mg/L- 5 mg/L), salinity (0.5 ppt-30 ppt), temperature (10 °C-45 °C), and cyst stocking density (10 cysts/L-100 cysts/L) on hatching efficiency and swimming competencies. Results demonstrated that higher microfiber dosages (2.5 mg/L-5 mg/L) significantly reduced the hatching efficiencies and swimming competencies, while temperature and cyst density also modulated these effects. Additionally, survival assays indicated a significant reduction in survival rates with increasing microfiber concentrations, attributed to the bioaccumulation, oxidative stress and developmental deformities in the organism. The study further explores the leaching of chromophoric dissolved organic matter and turbidity, revealing a direct correlation with microfiber dosage and exposure duration. These findings underscore the urgent need for mitigation strategies to address microfiber pollution and protect aquatic ecosystems. Data presented from the research provides valuable insights into the environmental impacts of plastic microfiber contamination, emphasizing the necessity for continued investigation into effective solutions for managing plastic waste.

Ketonized Carbonitride Assembled Face Mask with Long-Term Light Triggered Antimicrobial Ability for Bioprotective Applications

The worldwide transmission of infectious respiratory pathogens has caused innumerable deaths and suffering, while wearing a face mask is still the most effective way to terminate the respiratory infections spread. However, the frequent mask replacement as a result of the lack of pathogen sterilization ability not only increases the cross-contamination risk but also, even worse, produces a large amount of medical waste. In this work, we report on a ketonized carbonitride functionalized bioprotective face mask with pathogen sterilization activity that can effectively produce biocidal singlet oxygen triggered by light irradiation. Ketonized carbonitride loading on the outer layer of the mask is found to be capable of generating singlet oxygen, enabling the mask with antibacterial ability. Thanks to its high pathogen inactivation activity, the as-prepared mask exhibits long-term light triggered health protection performance, which, in return, reduces medical waste production as a result of the decreased mask replacement frequency. The synthesis of a fascinating bioprotective mask provides a new viewpoint into the development of personal bioprotective devices for health protection.

Floating microplastic pollution in the vicinity of a marine protected area and semi-enclosed bay of Peru

A baseline survey for floating microplastics (MPs) in the vicinity of a marine protected area and semi-enclosed bay of northern Peru was carried out. An average concentration of 0.22 MPs/L was estimated, primarily dominated by blue polyethylene terephthalate fibers. The distribution of floating MPs suggests that they tend to accumulate within the semi-enclosed Sechura Bay regardless of the sampling season. This behavior may be explained by local surface currents in the bay, which flow inwards and exhibit vorticities that could entrap MPs. Future studies are suggested to investigate the trajectory and fate of floating MPs within semi-enclosed areas. On the other hand, the impact of floating MPs on the trophic chain of coastal marine protected areas requires further research.

Landscape and risk assessment of microplastic contamination in farmed oysters and seawater along the coastline of China

Microplastic (MP) pollution poses a significant threat to marine ecosystem and seafood safety. However, comprehensive and comparable assessments of MP profiles and their ecological and health in Chinese farming oysters are lacking. This study utilized laser infrared imaging spectrometer (LDIR) to quantify MPs in oysters and its farming seawater at 18 sites along Chinese coastlines. Results revealed a total of 3492 MPs in farmed oysters and seawater, representing 34 MP types, with 20-100 µm MP fragments being the dominant. Polyurethane (PU) emerged as the predominant MP type in oysters, while polysulfones were more commonly detected in seawater. Notably, oysters from the Bohai Sea exhibited a higher abundance of MPs (13.62 ± 2.02 items/g) and estimated daily microplastic intake (EDI, 2.14 ± 0.26 items/g/kg·bw/day), indicating a greater potential health risk in the area. Meanwhile, seawater from the Yellow Sea displayed a higher level (193.0 ± 110.7 items/L), indicating a greater ecological risk in this region. Given the pervasiveness and abundance of PU and its high correlation with other MP types, we proposed PU as a promising indicator for monitoring and assessing the risk MP pollution in mariculture in China. These findings provide valuable insights into the extent and characteristics of MP pollution in farmed oysters and seawater in China.

The effects of micro- and nanoplastics on the central nervous system: A new threat to humanity?

Given the widespread production and use of plastics, poor biodegradability, and inadequate recycling, micro/nanoplastics (MNPs) have caused widespread environmental pollution. As a result, humans inevitably ingest MNPs through various pathways. However, there is still no consensus on whether exposure to MNPs has adverse effects on humans. This article aims to provide a comprehensive overview of the knowledge of MNPs and the potential mechanisms of their impact on the central nervous system. Numerous in vivo and in vitro studies have shown that exposure to MNPs may pass through the blood-brain barrier (BBB) and lead to neurotoxicity through impairments in oxidative and inflammatory balance, neurotransmitter alternation, nerve conduction-related key enzymes, and impact through the gut-brain axis. It is worth noting that MNPs may act as carriers and have more severe effects on the body when co-exposed with other substances. MNPs of smaller sizes cause more severe harm. Despite the scarcity of reports directly relevant to humans, this review brings together a growing body of evidence showing that exposure to MNPs disturbs neurons and has even been found to alter the memory and behavior of organisms. This effect may lead to further potential negative influence on the central nervous system and contribute to the development of other diseases such as central nervous system inflammation and Parkinson 's-like neurodegenerative disorders. There is a need further to investigate the threat of MNPs to human health.

Identification and Visualization of Polystyrene Microplastics/Nanoplastics in Flavored Yogurt by Raman Imaging

The contamination of food by microplastics has garnered widespread attention, particularly concerning the health risks associated with small-sized microplastics. However, detecting these smaller microplastics in food poses challenges attributed to the complexity of food matrices and instrumental and method limitations. Here, we employed Raman imaging for visualization and identification of polystyrene particles synthesized in polymerization reactions, ranging from 400 to 2600 nm. We successfully developed a quantitative model of particle size and concentration for polystyrene, exhibiting excellent fit (R2 of 0.9946). We established procedures for spiked flavored yogurt using synthesized polystyrene, providing fresh insights into microplastic extraction efficiency. Recovery rates calculated from models validated the method's feasibility. In practical applications, the assessment of the size, type, shape, and quantity of microplastics in unspiked flavored yogurt was conducted. The most common polymers found were polystyrene, polypropylene, and polyethylene, with the smallest polystyrene sizes ranging from 1 to 10 μm. Additionally, we conducted exposure assessments of microplastics in branded flavored yogurt. This study established a foundation for developing a universal method to quantify microplastics in food, covering synthesis of standards, method development, validation, and application.

Microplastics release from face masks: Characteristics, influential factors, and potential risks

Since the COVID-19 pandemic, face masks have been used popularly and disposed of improperly, leading to the generation of a large amount of microplastics. The objective of this review is to provide a comprehensive insight into the characteristics of mask-derived microplastics, the influential factors of microplastics release, and the potential risks of these microplastics to the environment and organisms. Mask-derived microplastics were predominantly transparent fibers, with a length of <1 mm. The release of microplastics from masks is mainly influenced by mask types, use habits, and weathering conditions. Under the same conditions, surgical masks release more microplastics than other types of masks. Long-term wearing of masks and the disinfection for reuse can promote the release of microplastics. Environmental media, UV irradiation, temperature, pH value, and mechanical shear can also influence the microplastics release. The risks of mask-derived microplastics to human health via inhalation cannot be neglected. Future studies should pay more attention to the release of microplastics from the masks with alternative materials and under more weathering conditions.

Critical review on airborne microplastics: An indoor air contaminant of emerging concern

Airborne Microplastics (MPs), an emerging environmental issue, have gained recent attention due to their newfound presence in indoor environments. Utilizing the Web of Science database for literature collection, the paper presents a comprehensive review of airborne MPs including emission sources, assessment methods, exposure risks, and mitigation strategies. This review delves into the diverse sources and mechanisms influencing indoor airborne MP pollution, underscoring the complex interplay between human activities, ventilation systems, and the characteristics of indoor environments. Major sources include the abrasion of synthetic textiles and the deterioration of flooring materials, with factors like carpeting, airflow, and ventilation significantly impacting MP levels. Human activities, such as increased movement in indoor spaces and the intensive use of plastic-based personal protective equipment (PPE) post-pandemic, notably elevate indoor MP concentrations. The potential health impacts of airborne MPs are increasingly concerning, with evidence suggesting their role in respiratory, immune, and nervous system diseases. Despite this, there is a scarcity of information on MPs in diverse indoor environments and the inhalation risks associated with the frequent use of PPE. This review also stresses the importance of developing effective strategies to reduce MP emissions, such as employing HEPA-filtered vacuums, minimizing the use of synthetic textiles, and enhancing indoor ventilation. Several future research directions were proposed, including detailed temporal analyses of indoor MP levels, interactions of MP with other atmospheric pollutants, the transport dynamics of inhalable MPs (≤10 μm), and comprehensive human exposure risk assessments.

Leachate from municipal solid waste landfills: A neglected source of microplastics in the environment

Over the past decade or so, microplastics (MPs) have received increasing attention due to their ubiquity and potential risk to the environment. Waste plastics usually end up in landfills. These plastics in landfills undergo physical compression, chemical oxidation, and biological decomposition, breaking down into MPs. As a result, landfill leachate stores large amounts of MPs, which can negatively impact the surrounding soil and water environment. However, not enough attention has been given to the occurrence and removal of MPs in landfill leachate. This lack of knowledge has led to landfills being an underestimated source of microplastics. In order to fill this knowledge gap, this paper collects relevant literature on MPs in landfill leachate from domestic and international sources, systematically summarizes their presence within Asia and Europe, assesses the impacts of landfill leachate on MPs in the adjacent environment, and particularly discusses the possible ecotoxicological effects of MPs in leachate. We found high levels of MPs in the soil and water around informal landfills, and the MPs themselves and the toxic substances they carry can have toxic effects on organisms. In addition, this paper summarizes the potential impact of MPs on the biochemical treatment stage of leachate, finds that the effects of MPs on the biochemical treatment stage and membrane filtration are more significant, and proposes some novel processes for MPs removal from leachate. This analysis contributes to the removal of MPs from leachate. This study is the first comprehensive review of the occurrence, environmental impact, and removal of MPs in leachate from landfills in Asia and Europe. It offers a comprehensive theoretical reference for the field, providing invaluable insights.

Environmental and ecological risk of microplastics in the surface waters and gastrointestinal tract of skipjack tuna (Katsuwonus pelamis) around the Lakshadweep Islands, India

The presence of microplastics (MPs) in marine ecosystems is widespread and extensive. They have even reached the deepest parts of the ocean and polar regions. The number of articles on plastic pollution has increased in recent years, but few have investigated the MPs from oceanic islands which are biodiversity hotspots. We investigated the possible microplastic contamination their source and characteristics in surface waters off Kavaratti Island and in the gastrointestinal tract (GT) of skipjack tuna, Katsuwonus pelamis collected from Kavaratti Island of the Lakshadweep archipelago. A total of 424 MP particles were isolated from the surface water samples collected from off Kavaratti Island with an average abundance of 5 ± 1nos./L. A total of 117 MPs were recovered from the GT of skipjack tuna from 30 individual fishes. This points to a potential threat of MP contamination in seafood around the world since this species has a high value in local and international markets. Fiber and blue color were the most common microplastic morphotypes and colors encountered, respectively, both from surface water and GT of fish. Smaller MPs (0.01-1 mm) made up a greater portion of the recovered materials, and most of them were secondary MPs. Polyethylene and polypropylene were the most abundant polymers found in this study. The Pollution Load Index (1.3 ± 0.21) of the surface water and skipjack tuna (1 ± 0.7) indicates a minor ecological risk for the coral islands, while the Polymer Hazard Index highlights the ecological risk of polymers, even at low MP concentrations. This pioneer study sheds preliminary light on the abundance, properties, and environmental risks of MPs to this highly biodiverse ecosystem.

Effect of aging on the release of di-(2-ethylhexyl) phthalate from biodegradable and petroleum-based microplastics into soil

Due to microplastics (MPs) being widely distributed in soil, the use of advanced oxidation to remediate organic-contaminated soils may accelerate the aging of MPs in soil and impact the release of di-(2-ethylhexyl) phthalate (DEHP), a potential carcinogen used as a plasticizer in plastics, from MPs. In this study, persulfate oxidation (PO) and temperature treatment (TT) were used to treat biodegradable and petroleum-based MPs, including polylactic acid (PLA), polyvinyl chloride (PVC), and polystyrene (PS). The methods used for evaluating the characteristics changes of MP were X-ray diffraction (XRD) analysis and water contact angle measurement. The effects of aging on DEHP release from MPs were investigated via soil incubation. The results showed PO and TT led to increased surface roughness, oxygen-containing functional group content, and hydrophilicity of the MPs with prolonged aging, consequently accelerating the release of DEHP from the MPs. Interestingly, PLA aged faster than PVC and PS under similar conditions. After 30 days of PO treatment, DEHP release from PLA into the soil increased 0.789-fold, exceeding the increase from PVC (0.454-fold) and PS (0.287-fold). This suggests that aged PLA poses a higher ecological risk than aged PVC or PS. Furthermore, PO treatment resulted in the oxidation and degradation of DEHP on the MP surface. After 30 days of PO treatment, the DEHP content in PLA, PVC, and PS decreased by 19.1%, 25.8%, and 23.5%, respectively. Specifying the types of MPs studied and the environmental conditions would provide a more precise context for the results. These findings provide novel insights into the fate of biodegradable and petroleum-based MPs and the potential ecotoxicity arising from advanced oxidation remediation in contaminated soils.

Metabolic equilibrium and reproductive resilience: Freshwater gastropods under nanoplastics exposure

Nanoplastics (NPs) have gained increasing attention due to their widespread presence in aquatic environments and potential adverse effects on organisms. The interaction between NPs and freshwater gastropods can lead to a range of physiological and reproductive disturbances. In this study, we investigated the adverse effects of NPs (two size: 20 nm and 100 nm; three concentrations: 0.5, 50 and 100 ppm) on energy metabolism and reproductive fitness in freshwater gastropods Lymnean stagnalis after 21 days exposure. Briefly, the condition index negatively correlated with increasing NPs concentrations for both sizes. Bioaccumulation revealed a concentration-dependent trend in the 100 nm group, and the highest accumulation appeared in the 100 ppm group, compared to all the rest groups. This phenomenon could be attributed to the larger surface area which facilitates stronger attachment to tissues, while smaller particles could be cleared more readily from body. Carbohydrate and protein reserves remained largely unaffected at all concentrations. However, 100 nm NPs triggered stress responses, increasing lipid production, and 20 nm NPs potentially interfered with mitochondrial function, affecting electron transport system activity. Despite the variations observed in lipid levels and energy cost, the ratio of available energy to energy cost remained stable across for both NPs sizes, and this resilience suggests that cellular energy allocation endured undisturbed, hinting at mechanisms that enable gastropods to maintain their metabolic equilibrium. Reproductively, NPL-exposed groups had fewer clutches, with clutches per collection time decreasing over time for both sizes. In terms of egg development, shell growth and hatching rates remained unaffected, suggesting resilience in aquatic ecosystems.In conclusion, this study underscores the substantial impact of NPs on freshwater gastropods, raising ecological and reproductive concerns. The intricate interplay between nanoparticle size, concentration, and physiological responses highlights the complexity of NPs interactions in aquatic ecosystems, necessitating further research and regulatory measures.

Exposure risk assessment of representative phthalate acid esters and associated plastic debris under the agricultural land use in typical Chinese regions

Phthalate acid esters (PAEs) are frequently detected in the global environment and can cause potential health hazards. In this study, quantitative exposure risk assessment was undertaken to derive soil generic assessment criteria (GAC) for six representative PAEs under the agricultural land use in the evaluated Chinese regions, which coupled multi-media transport and human exposure models based on multiple exposure pathways including vegetables consumption, dermal absorption, ingestion of soil and dust, and the exposure from non-soil sources. It is identified that the PAEs in agricultural soil are dominated by DEHP and DnBP representing 72-96% of the total PAEs. The GAC for BBP and DEHP, calculated on the basis of region-specific exposure parameters and soil properties in various locations, are stringent, signifying greater potential health risks from exposure to them, warranting more rigorous contamination management. The proposed soil GAC for plastic debris are 100, 107, 73 and 88 mg kg-1 for Heilongjiang Province, Beijing City, Jiangsu and Guangdong Provinces respectively. Additionally, the potential risks of 1.68 × 10-6 and 7 × 10-6 are identified for BBP and DEHP in Guangdong Province as indicated by the exceedance of target risk level of 1 × 10-6, with the consumption of vegetables being the dominant contributor to the total estimated PAEs exposure. Overall, this methodology based on the coupled contaminant transport and exposure models incorporating region-specific data provides a technical framework to derive science-based soil GAC for representative PAEs for maintaining and assessing soil quality and food safety under the agricultural land use.

Bacterial pathogens associated with the plastisphere of surgical face masks and their dispersion potential in the coastal marine environment

Huge numbers of face masks (FMs) were discharged into the ocean during the coronavirus pandemic. These polymer-based artificial surfaces can support the growth of specific bacterial assemblages, pathogens being of particular concern. However, the potential risks from FM-associated pathogens in the marine environment remain poorly understood. Here, FMs were deployed in coastal seawater for two months. PacBio circular consensus sequencing of the full-length 16S rRNA was used for pathogen identification, providing enhanced taxonomic resolution. Selective enrichment of putative pathogens (e.g., Ralstonia pickettii) was found on FMs, which provided a new niche for these pathogens rarely detected in the surrounding seawater or the stone controls. The total relative abundance of the putative pathogens in FMs was higher than in seawater but lower than in the stone controls. FM exposure during the two months resulted in 3% weight loss and the release of considerable amounts of microfibers. The ecological assembly process of the putative FM-associated pathogens was less impacted by the dispersal limitation, indicating that FM-derived microplastics can serve as vectors of most pathogens for their regional transport. Our results indicate a possible ecological risk of FMs for marine organisms or humans in the coastal and potentially in the open ocean.

Towards environmentally sustainable management: A review on the generation, degradation, and recycling of polypropylene face mask waste

There has been a considerable increase in the use of face masks in the past years. Managing face mask waste has become a global concern, as the current waste management system is insufficient to deal with such a large quantity of solid waste. The drastic increase in quantity, along with the material's inability to degrade plastic components such as polypropylene, has led to a large accumulation of plastic waste, causing a series of environmental and ecological challenges. In addition, the growing use also imposes pressure on waste management methods such as landfill and incineration, raising concerns about high energy consumption, low value-added utilization, and the release of additional pollutants during the process. This article initially reviews the impact of mask-related plastic waste generation and degradation behavior in the natural environment. It then provides an overview of various recently developed methods for recycling face mask plastic waste. The article also offers forward-looking strategies and recommendations on face mask plastic waste management. The review aims to provide guidance on harnessing the complexities of mask waste and other medical plastic pollution issues, as well as improving the current waste management system's deficiencies and inefficiencies in tackling the growing plastic waste problem.

Effect of biodegradable PBAT microplastics on the C and N accumulation of functional organic pools in tropical latosol

Microplastics (MPs) pollution is becoming an emerging global stressor for soil ecosystems. However, studies on the impacts of biodegradable MPs on soil C sequestration have been mainly based on bulk C quantity, without considering the storage form of C, its persistency and N demand. To address this issue, the common poly (butylene adipate-co-terephthalate) (PBAT) was used as the model, and its effects on soil functional organic pools, including mineral-associated (MAOM), particulate (POM) and dissolved organic matter (DOM), were investigated from the novel coupled perspective of C and N stocks. After adding PBAT-MPs, the contents of soil POM-C, DOM-C, and MAOM-C were increased by 546.9 %-697.8 %, 54.2 %-90.3 %, and 13.7 %-18.9 %, respectively. Accordingly, the total C increased by 116.0 %-191.1 %. Structural equation modeling showed that soil C pools were regulated by PBAT input and microbial metabolism associated with C and N enzymes. Specifically, PBAT debris could be disguised as soil C to promote POM formation, which was the main pathway for C accumulation. Inversely, the MAOM-C and DOM-C formation was attributed to the PBAT microbial product and the selective consumption in DOM-N. Random forest model confirmed that N-activated (e.g., Nitrospirae) and PBAT-degrading bacteria (e.g., Gemmatinadetes) were important taxa for soil C accumulation, and the key enzymes were rhizopus oryzae lipas, invertase, and ammonia monooxygenase. The soil N accumulation was mainly related to the oligotrophic taxa (e.g., Chloroflexi and Ascomycota) associated with aggregate formation, decreasing the DOM-N by 46.9 %-84.3 %, but did not significantly change the total N storage and other N pools. Collectively, the findings highlight the urgency to control the nutrient imbalance risk of labile N loss and recalcitrant C enrichment in POM to avoid the depressed turnover rate of organic matter in MPs-polluted soil.

Soils in distress: The impacts and ecological risks of (micro)plastic pollution in the terrestrial environment

Plastics have revolutionised human industries, thanks to their versatility and durability. However, their extensive use, coupled with inadequate waste disposal, has resulted in plastic becoming ubiquitous in every environmental compartment, posing potential risks to the economy, human health and the environment. Additionally, under natural conditions, plastic waste breaks down into microplastics (MPs<5 mm). The increasing quantity of MPs exerts a significant burden on the soil environment, particularly in agroecosystems, presenting a new stressor for soil-dwelling organisms. In this review, we delve into the effects of MP pollution on soil ecosystems, with a specific attention to (a) MP transport to soils, (b) potential changes of MPs under environmental conditions, (c) and their interaction with the physical, chemical and biological components of the soil. We aim to shed light on the alterations in the distribution, activity, physiology and growth of soil flora, fauna and microorganisms in response to MPs, offering an ecotoxicological perspective for environmental risk assessment of plastics. The effects of MPs are strongly influenced by their intrinsic traits, including polymer type, shape, size and abundance. By exploring the multifaceted interactions between MPs and the soil environment, we provide critical insights into the consequences of plastic contamination. Despite the growing body of research, there remain substantial knowledge gaps regarding the long-term impact of MPs on the soil. Our work underscores the importance of continued research efforts and the adoption of standardised approaches to address plastic pollution and ensure a sustainable future for our planet.

Foodborne and airborne polyethersulfone nanoplastics respectively induce liver and lung injury in mice: Comparison with microplastics

Micro/nanoplastics (MNP) are ubiquitous in the environment and multiple living organisms. The toxicity of some common types of MNP, e.g., polyethersulfone (PES) MNP, remains poorly understood. Multi-omics approaches were used in this study to determine the effects of foodborne and airborne PES MNP on liver and lung, respectively. Foodborne MNP were capable of inducing gut microbial dysbiosis, gut and serum metabolic disruption, and liver transcriptomic dysregulation, and affecting serum antioxidant activity and liver function, resulting in liver injury. As for the airborne MNP, they were found to induce nasal and lung microbial dysbiosis, serum and lung metabolic disruption, and liver transcriptome disturbance, and cause disrupted serum antioxidant activity and lung injury. Foodborne and airborne PES NP were found to respectively induce greater liver and lung toxicity than MP, which could be associated with the differences between NP and MP exposures. The relevant results suggest that foodborne PES MNP could disrupt the "gut microbiota-gut-liver" axis and induce hepatic injury, while airborne PES MNP could affect the "airborne microbiota-lung" axis and cause lung injury. The findings could benefit the diagnoses of liver and lung injury respectively induced by foodborne and airborne PES MNP, as well as the proper use of PES in human living environment.

Personal protective equipment (PPE) pollution associated with the COVID-19 pandemic on beaches in the eastern region of the Gulf of California, Mexico

The COVID-19 pandemic has led to an increase in plastic pollution, including improper disposal of personal protective equipment (PPE). This study focuses on examining the presence and distribution of discarded PPE in three locations in Sonora, Mexico, located within the Gulf of California. Transects were conducted in 2021 and 2022, during which PPE items were visually identified, photographed, and classified. Face masks were found to be the most prevalent PPE type (96% of the total), with polymer-based masks being the most commonly observed (97% of the total). The density of PPE was higher on recreational beaches compared to non-recreational ones. Statistical analysis revealed a significant difference (W = 217.5, p = 0.014) in the PPE density between the sampled recreational beaches in 2021 and 2022, with a higher density recorded in the first year. Improper disposal of PPE poses environmental risks and potential threats to marine organisms. The documented discarded COVID-19-related PPE in this study provides important baseline information for future research and monitoring. This information is valuable to better understand the ecotoxicological effects of PPE and develop effective waste management strategies in the Gulf of California.

Seasonal variations of microplastic in sediment, Chironomus sp. larvae, and chironomid tubes in two wastewater sites in Sohag Governorate, Egypt

Microplastic (MP) contamination is an acknowledged global problem that poses a severe risk to aquatic ecosystem biota. Nevertheless, little is known about their prevalence in animal construction. The main objective of our study was to reduce the gap information of seasonal abundance, distribution, composition, and risk assessment of MP contamination. The concentrations of MPs in sediment, Chironomus sp. larvae, and their tubes were found to be higher in site 2 (S2) than in site 1 (S1) during the four seasons of the year. However, MP concentrations ranged from 312 ± 64.7 to 470 ± 70 items/kg dry weight, 0.79 ± 0.16 to 1.1 ± 0.3 particles/individual, and 0.5 ± 0.04 to 0.9 ± 0.04 particles/tube in sediment, Chironomus, and chironomid tubes, respectively. Blue and red polyester fibers are the most dominant MPs which are distributed in sediment, Chironomus, and chironomid tubes. The length of the dominant fiber accumulates in Chironomus, and their tubes are highly varied compared to that of the substrate. Additionally, we found that the mean number of MPs/individual larvae in the fourth instar was significantly higher than that in the second instar. Risk indicators for the environment, polymer risk assessment, and pollution load were estimated, where they were higher in S2 than in S1 correlated to MPs abundance and polymer type. The seasonal fluctuation in MP concentration, characterization, and risk in the two sites could depend on the amount of sewage effluent discharged into the wastewater treatment plants (WWTPs), which was reflected by Chironomus sp. larvae. Therefore, further research should be done to adopt the applicability of Chironomus as MP bioindicators in various freshwater environments throughout the world.

Plastic and paint debris in marine protected areas of Peru

Contamination with anthropogenic debris, such as plastic and paint particles, has been widely investigated in the global marine environment. However, there is a lack of information regarding their presence in marine protected areas (MPAs). In the present study, the abundance, distribution, and chemical characteristics of microplastics (MPs; <5 mm), mesoplastics (MePs; 5-25 mm), and paint particles were investigated in multiple environmental compartments of two MPAs from Peru. The characteristics of MPs across surface water, bottom sediments, and fish guts were similar, primarily dominated by blue fibers. On the other hand, MePs and large MPs (1-5 mm) were similar across sandy beaches. Several particles were composite materials consisting of multiple layers confirmed as alkyd resins by Fourier-transformed infrared spectroscopy, which were typical indicators of marine coatings. The microstructure of paint particles showed differentiated topography across layers, as well as different elemental compositions. Some layers displayed amorphous structures with Ba-, Cr-, and Ti-based additives. However, the leaching and impact of potentially toxic additives in paint particles require further investigation. The accumulation of multiple types of plastic and paint debris in MPAs could pose a threat to conservation goals. The current study contributed to the knowledge regarding anthropogenic debris contamination in MPAs and further elucidated the physical and chemical properties of paint particles in marine environments. While paint particles may look similar to MPs and MePs, more attention should be given to these contaminants in places where intense maritime activity takes place.

Temporal trends in personal protective equipment (PPE) debris during the COVID-19 pandemic in Çanakkale (Turkey)

This study examines trends in PPE (masks, gloves) and disinfecting wipes over three years of the pandemic. The densities of discarded masks, wet wipes, and gloves (personal protective equipment: PPE), were quantified on the streets of Canakkale, Turkey during similar time periods in 2020, 2021 and 2022. Geotagged images of PPE on the streets and sidewalks were documented with a smartphone, while the track of an observer was recorded using a fitness tracker app along a 7.777 km long survey route in the city center, parallel to the Dardanelles Strait. A total of 18 surveys were conducted over three years, and the survey route was subdivided into three zones based on utilization patterns: pedestrian zone, traffic zone and a recreational park zone. The combined densities of all types of PPE density were high in 2020, lower in 2021 and highest in 2022. The within year trend showed an increase over the three study years. The average density of gloves declined from an initially high level in 2020, when the SARS-CoV-2 virus was thought to be transmitted by contact, to near zero in 2021 and to zero in 2022. Densities of wipes were similar in 2020 and 2021 and higher in 2022. Masks were initially difficult to procure in 2020, and their densities progressively increased during that year reaching a plateau in 2021 with similar densities in 2022. PPE densities were significantly lower in the pedestrian route relative to the traffic and park routes, which were not different from each other. The partial curfews implemented by the Turkish government and the effects of prevention measures taken on the PPE concentration in the streets are discussed along with the importance of waste management practices.

Toxicity of photoaged polyvinyl chloride microplastics to wheat seedling roots

Photoaging-prone and additive-rich polyvinyl chloride microplastics (PVC-MPs) are abundant in the terrestrial environment, However, current knowledge about the effects of PVC-MPs on terrestrial plants is lacking. Herein, we investigated the physicochemical toxicity mechanisms of photoaged PVC-MP components, i.e. leachate (L), leached PVC-particles (P), and unleached PVC-MPs (UAMP), to wheat seedling roots. 108-h photoaged components were more detrimental to root growth than unaged ones, with root length decline by 3.56%- 7.45%, indicating enhanced ecotoxicity. Notably, 108-h aged UAMP displayed more pronounced inhibition to root architecture, nutrient content and root activity, and more significant stimulation on antioxidant systems compared to 108-h aged L and P. The abovementioned phenomena suggested the presence of a synergistic effect between physical damage from P and chemical harm from L. Surface adsorption experiments demonstrated that the adsorption of photoaging induced smaller particles caused physical damage to root system. Exposure treatment suggested that there was appreciable environmental risk posed by photoaged PVC-MP-derived additives, e.g., Irgafos 168-ox and Irganox 1076. Based on principal component analysis (PCA), additives from leachate played a greater role in UAMP ecotoxicity. Therefore, PVC-MP-derived additives require more consideration and put forward an important new aspect for the impact assessment of PVC-MPs in the environment.

Phthalate acid esters contribute to the cytotoxicity of mask leachate: Cell-based assay for toxicity assessment

After the COVID-19 outbreak, masks have become an essential part of people lives. Although several studies have been conducted to determine the release of hazardous substances from masks, how their co-presence poses a potential exposure risk to human health remains unexplored. In this study, we quantitatively compared the leaching of substances from six different common types of masks, including phthalate acid esters (PAEs), metals, and microplastics (MPs), and comprehensively evaluated the potential cytotoxicity of different leachates. MPs smaller than 3 µm were quantified by Py-GC-MS, and reusable masks showed greater releasing potentials up to 1504 µg/g. We also detected the prevalence of PAEs in masks, with the highest release reaching 42 μg/g, with dibutyl phthalate (DBP), diisobutyl phthalate (DiBP) and bis (2-ethylhexyl) phthalate (DEHP) being the predominant types. Moreover, the antimicrobial cloth masks released 173.0 µg of Cu or 4.5 µg of Ag, representing 2.7% and 0.04% of the original masks, respectively. Our cell-based assay results demonstrated for the first time that mask leachate induced nuclear condensation with DNA damage, and simultaneously triggered high levels of glutathione and reactive oxidative stress production, which exacerbated mitochondrial fragmentation, eventually leading to cell death. Combined with substance identification and correlation analysis, PAEs were found to be the contributors to cytotoxicity. Masks containing Cu or Ag led to acidification of lysosomes and alkalinization of cells. These results strongly suggested that the levels of PAEs in the production of regulatory masks should be strictly controlled.

Microplastics: Human exposure assessment through air, water, and food

BACKGROUND

Microplastics (MP) are plastic particles with dimension up to 5 mm. Due to their persistence, global spread across different ecosystems and potential human health effects, they have gained increasing attention during the last decade. However, the extent of human exposure to MP through different pathways and their intake have not been elucidated.

OBJECTIVES

The objective of this review is to provide an overview on the pathways of exposure to MP through inhalation, ingestion, and dermal contact considering data from the open bibliography on MP in air, dust, food, water and drinks.

METHODS

A bibliographic search on Scopus and PubMed was conducted using keywords on MP in outdoor and indoor air, indoor dust, food including beverages and water and human intake (n = 521). Articles were sorted by their title and abstract (n = 213), and only studies reporting MP identification and quantification techniques were further considered (n = 168). A total of 115 articles that include quality assurance and quality control (QA/QC) procedures are finally discussed in the present review. Based on MP concentration data available in literature, we estimated the potential inhaled dose (ID), dust intake (DI), the estimated daily intake (EDI) via food and beverages. Finally, the total daily intake (TDI) considering both inhalation and ingestion routes are provided for adults, infants and newborns.

RESULTS

The concentrations of MP in outdoor and indoor air, dust, and in food and water are provided according to the bibliography. Human exposure to MP through dust ingestion, inhalation of air and food/drinks consumption revealed that indoor air and drinking waters were the main sources of MP.

CONCLUSIONS

This study reveals that humans are constantly exposed to MP, and that the indoor environment and the food and water we ingest decisively contribute to MP intake. Additionally, we highlight that infants and newborns are exposed to high MP concentrations and further studies are needed to evaluate the presence and risk of MP in this vulnerable age-population.

Multidisciplinary recommendations for the management of CAR-T recipients in the post-COVID-19 pandemic era

The outbreak of coronavirus disease 2019 (COVID-19) posed an unprecedented challenge on public health systems. Despite the measures put in place to contain it, COVID-19 is likely to continue experiencing sporadic outbreaks for some time, and individuals will remain susceptible to recurrent infections. Chimeric antigen receptor (CAR)-T recipients are characterized by durable B-cell aplasia, hypogammaglobulinemia and loss of T-cell diversity, which lead to an increased proportion of severe/critical cases and a high mortality rate after COVID-19 infection. Thus, treatment decisions have become much more complex and require greater caution when considering CAR T-cell immunotherapy. Hence, we reviewed the current understanding of COVID-19 and reported clinical experience in the management of COVID-19 and CAR-T therapy. After a panel discussion, we proposed a rational procedure pertaining to CAR-T recipients with the aim of maximizing the benefit of CAR-T therapy in the post COVID-19 pandemic era.

COVID-19 personal protective equipment (PPE) contamination in coastal areas of Granada, Spain

The use of disposable personal protective equipment (PPE) as a control measure to avoid transmission against COVID-19 has generated a challenge to the waste management and enhances plastic pollution in the environment. The research aims to monitor the presence of PPE waste and other plastic debris, in a time interval where the use of face mask at specific places was still mandatory, on the coastal areas of Granada (Spain) which belongs to the Mediterranean Sea. Four beaches called La Rijana, La Charca, La Rábita and Calahonda were examined during different periods. The total amount of sampled waste was 17,558 plastic units. The abundance, characteristics and distribution of PPE and other plastic debris were determined. Results showed that the observed amount of total plastic debris were between 2.531·10-2 and 24.487·10-2 units per square meter, and up to 0.136·10-2 for PPE debris, where face masks represented the 92.22 % of the total PPE debris, being these results comparable to previous studies in other coastal areas in the world. On the other hand, total plastic debris densities were in the range from 2.457·10-2 to 92.219·10-2 g/m2 and densities were up to 0.732·10-2 for PPE debris. PPE debris supposed 0.79 % of the weight of total waste and the 0.51 % of total items. Concerning non-PPE plastic waste: cigarettes filters, food containers and styrofoam were the most abundant items (42.95, 10.19 and 16.37 % of total items, respectively). During vacation periods, total plastic debris amount increased 92.19 % compared to non-vacation periods. Regarding type of beaches, the presence of plastic debris was significantly higher on touristic/recreational than in fishing beaches. Data showed no significant differences between accessible and no-accessible beaches, but between periods with restrictive policy about mask face use and periods with non-restrictive policy data suggest significant differences between densities (g/m2) for PPE litter. The amount of PPEs debris is also correlated with the number of cigarettes filters (Person's r = 0.650), food containers (r = 0.782) and other debris (r = 0.63). Finally, although interesting results were provided in this study, further research is required to better understand the consequences of this type of pollution and to provide viable solutions to this problem.

Distribution and flux assessment of microplastic debris in the middle and lower Chao Phraya River, Thailand

Microplastic (MP) debris is now a global concern. The Chao Phraya is the largest river in Thailand and transports MPs from terrestrial areas to the ocean. MP debris in its water and sediment were measured in March 2021, September 2021, and March 2022 in five provinces along the watercourse. Hydrological data were also collected to estimate the MP riverine flux between provinces. Size, shape, color, and types of MP polymers were observed, with sedimentation data collected for MP content. Results showed that MPs were found at all sample stations, with average abundance in all province water samples ranging from 0.54 ± 0.05 to 1.07 ± 0.28 pieces/L, while in sediment sample, numbers ranged from 183.84 ± 38.76 to 546.18 ± 86.84 pieces/kg dry weight throughout all seasons. Overall contamination and accumulation were similar between provinces but significantly different between seasons. Sizes of MPs in water varied between seasons with MPs in sediment mostly 330-5,000 μm (Kruskal-Wallis, P < 0.05). Sedimentation of MPs was different between seasons (Kruskal-Wallis, P < 0.05). The highest MP flux values discharged from Samut Prakan Province to the inner Gulf of Thailand were 1.83 × 10⁵ and 1.60 × 10⁵ million items/day in September 2021 and March 2022, respectively.

Comparison between discarded facemask and common plastic waste on microbial colonization and physiochemical properties during aging in seawater

Facemasks are indispensable for preventing the spread of COVID-19. However, improper disposal of discarded facemasks has led to their contamination in the marine environment. To understand the environmental risk of this emerging plastic pollution, it's important to clarify the features that distinguish discarded facemasks from common plastic waste during aging. This study compared the microbial colonization, degradation-related enzymes, and physicochemical properties among surgical masks, polystyrene cups, polycarbonate bottles, and polyethylene terephthalate bottles in their aging processes in natural seawater. Compared to the other plastic wastes, surgical masks were colonized by the most diverse microorganisms, reaching 1521 unique prokaryotic OTUs after 21-day exposure in seawater. Moreover, the activity of eukaryotic enzymes associated with plastic degradation was 80-fold higher than that in seawater, indicating that the colonized eukaryotes would be the major microorganisms degrading the surgical masks. Meanwhile, the nano-sized defects (depth between 8 and 61 nm) would evolve into cracks of bigger sizes and result in the breakage of the microfibers and releasing microplastics into the ocean. Overall, our study demonstrated a distinctive plastisphere occurred in surgical masks from both microbial and physiochemical aspects. This work provides new insights for assessing the potential risk of plastic pollution caused by the COVID-19 pandemic.

Chemical-analytical characterization and leaching of heavy metals associated with nanoparticles and microplastics from commercial face masks and the abundance of personal protective equipment (PPE) waste in three metropolitan cities of South America

In this study, we surveyed the presence of personal protective equipment (PPE) waste on the streets of Bogotá-Colombia, Lima-Perú, and Mar del Plata-Argentina. Furthermore, this work is also focused on the release capacity of Ag, Cu, and Zn metals associated with nanoparticles, and microplastics (MPs) from textile face masks (TFMs) and disposable face masks. According to our results, an association between low-income areas and PPE waste was found, which may be related to the periodicity of waste collection and economic activity. Polymers, like polypropylene, cotton-polyester, and additives, such as CaCO₃, MgO, and Ag/Cu as nanoparticles, were identified. TFMs released high levels of Cu (35,900-60,200 μg·L^-1), Zn (2340-2380 μg·L^-1), and MPs (4528-10,640 particles/piece). Metals associated with nanoparticles leached by face masks did not present any antimicrobial activity against P. aeruginosa. Our study suggests that TFMs may leach large amounts of polluting nano/micromaterials in aquatic environments with potential toxicological effects on organisms.

A first report on the spatial and temporal variability of microplastics in coastal soils of an urban town in south-western India: Pre- and post-COVID scenario

We present a first study on the temporal changes (2019-2021) in the microplastic abundance in the coastal soils of an urban town in the south-western part of India. All sampling stations exhibited higher abundances of microplastics in soils collected during 2021 (959.7 ± 277.7 particles/kg) compared to those collected in 2019 (515.1 ± 182.7 particles/kg). Morphologically, flakes, fibres, and films are the most abundant types documented in the soil environment. The microplastics of 0.3-5 mm size are relatively more abundant (60.6 %) compared to those of 0.03-0.3 mm size (39.4 %) in 2021. The three main types of polymers (polypropylene and high- and low-density polyethylene) in the soil exhibited an increase in abundance during an interval of 15 months (October 2019 to March 2021). In addition to packaging materials, the enhanced use of surgical masks during the COVID-19 period might have acted as a source of microplastic contamination in the soils.

Occurrence and risks of microplastics in the ecosystems of the Middle East and North Africa (MENA)

The ubiquitous nature of microplastics (MPs) in nature and the risks they pose on the environment and human health have led to an increased research interest in the topic. Despite being an area of high plastic production and consumption, studies on MPs in the Middle East and North Africa (MENA) region have been limited. However, the region witnessed a research surge in 2021 attributed to the COVID-19 pandemic. In this review, a total of 97 studies were analyzed based on their environmental compartments (marine, freshwater, air, and terrestrial) and matrices (sediments, water columns, biota, soil, etc.). Then, the MP concentrations and polymer types were utilized to conduct a risk assessment to provide a critical analysis of the data. The highest MP concentrations recorded in the marine water column and sediments were in the Mediterranean Sea in Tunisia with 400 items/m³ and 7960 items/kg of sediments, respectively. The number of MPs in biota ranged between 0 and 7525 per individual across all the aquatic compartments. For the air compartment, a school classroom had 56,000 items/g of dust in Iran due to the confined space. Very high risks in the sediment samples (Erⁱ > 1500) were recorded in the Caspian Sea and Arab/Persian Gulf due to their closed or semi-closed nature that promotes sedimentation. The risk factors obtained are sensitive to the reference concentration which calls for the development of more reliable risk assessment approaches. Finally, more studies are needed in understudied MENA environmental compartments such as groundwater, deserts, and estuaries.