Palm oil as a biolubricant: Literature review of processing parameters and tribological performance

Biolubricants from waste cooking oil: A review of extraction technologies, conversion techniques, and performance enhancement using natural antioxidants

Effective management of agricultural and industrial by-products is essential for promoting circular economic practices and enhancing environmental sustainability. Agri-food wastes and waste cooking oil (WCO) represent two abundant residual streams with significant potential for sustainable biolubricant production. Valorizing biomass and WCO aligns with Sustainable Development Goal (SDG) 7, as it improves energy efficiency through enhanced lubricant performance and reduced energy loss. Furthermore, this sustainable approach contributes to SDG 12 and SDG 13 by minimizing waste production and accumulation, thereby mitigating negative environmental impacts and climate change. This critical review addresses existing gaps in the production of biolubricants from WCO and the incorporation of natural antioxidants as versatile additives. It examines and compares various techniques for the extraction, chemical and physical modification, and characterization of WCO-derived biolubricants. Specific methods, including esterification, transesterification, and antioxidant incorporation, are evaluated for their effectiveness in converting WCO into biolubricants. The review also discusses the influence of residual bioactive compounds on oxidative stability and lubricating properties. While vegetable oils demonstrate superior friction-reducing capabilities compared to petroleum-based lubricants, their triglyceride structure often results in poor oxidative stability, limiting their practical applications. Modification strategies and antioxidant inclusion are proposed to enhance this stability. A comprehensive analysis of the physicochemical properties and tribological performance of biolubricants, both pre- and post-processing, is presented. This systematic evaluation of extraction and upgrading methodologies aims to facilitate the development and industrial adoption of sustainable biolubricants.

Enhancing tribological performance of electric vehicle lubricants: Nanoparticle-enriched palm oil biolubricants for wear resistance

The transition to electric vehicles (EVs) calls for sustainable advancements in automotive lubricants, as traditional fossil-fuel-based products pose environmental challenges. Palm oil-based biolubricants enriched with nanoparticles present a promising eco-friendly alternative that meets the thermal and tribological demands of EVs. This paper aims to analyze the development of nanoparticle-enriched palm oil-based biolubricants, aimed at improving the sustainability and performance of electric vehicle (EV) lubrication systems. The critical findings highlight that integrating nanoparticles such as graphene, titanium dioxide, and aluminum oxide into palm oil-based lubricants significantly enhances their tribological properties. These enhancements include a 26.21%-34% reduction in coefficient of friction (COF), a 12.99%-30% reduction in wear, and improved thermal stability. The study found that nanoparticle-enriched biolubricants outperformed traditional options in terms of friction and wear under high-temperature and pressure conditions, as supported by regression analysis. The study demonstrates that nanoparticle-enriched biolubricants offer a viable eco-friendly alternative to conventional lubricants, lowering the environmental impact by reducing greenhouse gas emissions and energy consumption. This innovation has significant implications for both the environment and industry, offering a sustainable solution that reduces dependency on fossil fuels, enhances EV efficiency, and aligns with global sustainability goals. Besides, this paper discusses biolubricants drawbacks and future studies direction.

Preliminary study of physicochemical, thermal, rheological, and interfacial properties of quinoa oil

Background: The growing popularity of nutrient-rich foods, among which is quinoa, is due to the increasing demand for healthier choices. Oils and hydrolyzed proteins from these foods may help prevent various health issues. The objective of this work was to perform extraction from the endosperm of the grain from high-protein quinoa flour by physical means via a differential abrasive milling process and extracting the oil using an automatic auger extractor at 160°C, as well as characterizing extracted oil. Methods: Quinoa oil extraction and physicochemical characterization were carried out. Chemical and physical quality indexes of quinoa oil were established, and both characterizations were conducted based on international and Columbian standards. Thermal properties were evaluated by differential scanning calorimetry, and rheological and interfacial properties of the oil were evaluated using hybrid rheometers and Drop Tensiometers, respectively, to determine its potential for obtaining functional foods. Results: The result was 10.5 g of oil/ 100 g of endosperm, with a moisture content of 0.12%, insoluble impurities of 0.017%, peroxide index of 18.5 meq O 2/kg of oil, saponification index of 189.6 mg potassium hydroxide/g of oil, refractive index of 1.401, and a density of 0.9179 g/cm 3 at 20°C. Regarding contaminating metals, it presented 7 mg of iron/kg of oil, a value higher than previously established limits of 5 mg of iron/kg of oil. The oil contained 24.9% oleic acid, 55.3% linoleic acid, and 4% linolenic acid, demonstrating antioxidant capacity. Quinoa oil showed thermal properties similar to other commercial oils. Conclusions: The interfacial and rheological properties were suitable for the stabilization of emulsions, gels, and foams, which are important in various industrial applications and could facilitate the development of new products. The extracted quinoa oil presented similar characteristics to other commercial oils, which could make it a potential product for commercialization and application in different industries.