Microwave-Accelerated Metal-Enhanced Fluorescence (MAMEF) with silver colloids in 96-well plates: Application to ultra fast and sensitive immunoassays, High Throughput Screening and drug discovery

Optical and topographic characteristics of silver films deposited from a colloidal solution on polyelectrolytes for IgG-FITC fluorescence analysis

The optimization of the fluorescence enhancement factor of the IgG-FITC conjugate as an immunofluorescent marker, depending on the optical and topographic parameters of the colloidal silver film on the surface of a polystyrene plate for immunoassay, was carried out for the first time, and the factors effecting the enhancement were identified. By means of time-resolved spectroscopy as well as by detection the relative concentrations of IgG-FITC adsorbed on the solid phase with enzyme-linked immunoassay, it was shown that fluorescence enhancement in the presence of silver nanoparticles is a resonance process associated with plasmon effects. The most important parameters correlating with the fluorescence enhancement factor are the optical density value at the wavelength of excitation and emission of the fluorophore. The maximum enhancement factor of 10.2 times was obtained for Ag films with the highest optical density.

Monosaccharide-mediated rational synthesis of a universal plasmonic platform with broad spectral fluorescence enhancement for high-sensitivity cancer biomarker analysis

Background

Effective and accurate screening of oncological biomarkers in peripheral blood circulation plays an increasingly vital role in diagnosis and prognosis. High-sensitivity assays can effectively aid clinical decision-making and intervene in cancer in a localized status before they metastasize and become unmanageable. Meanwhile, it is equally pivotal to prevent overdiagnosis of non-life-threatening cancer by eliminating unnecessary treatment and repeated blood draws. Unfortunately, current clinical screening methodologies can hardly simultaneously attain sufficient sensitivity and specificity, especially under resource-restrained circumstances. To circumvent such limitations, particularly for cancer biomarkers from early-onset and recurrence, we aim to develop a universal plasmonic platform for clinical applications, which macroscopically amplifies multiplexed fluorescence signals in a broad spectral window and readily adapts to current assay setups without sophisticated accessories or expertise at low cost.

Methods

The plasmonic substrate was chemically synthesized in situ at the solid–liquid interface by rationally screening a panel of reducing monosaccharides and tuning the redox reactions at various catalyst densities and precursor concentrations. The redox properties were studied by Benedict’s assay and electrochemistry. We systemically characterized the morphologies and optical properties of the engineered plasmonic Ag structures by scanning electron microscopy (SEM) and spectroscopy. The structure-fluorescence enhancement correlation was explicitly explained by the finite-difference time-domain (FDTD) simulation and a computational model for gap distribution. Next, we established an enhanced fluoroimmunoassay (eFIA) using a model biomarker for prostate cancer (PCa) and validated it in healthy and PCa cohorts. Prognosis was explored in patients subject to surgical and hormonal interventions following recommended PCa guidelines.

Results

The monosaccharide-mediated redox reaction yielded a broad category of Ag structures, including sparsely dispersed nanoparticles (NPs) of various sizes, semi-continuous nanoislands, and crackless continuous films. Optimal broad-spectral fluorescence enhancement from green to far-red was observed for the inhomogeneous, irregularly-shaped semi-continuous Ag nanoisland substrate (AgNIS), synthesized from a well-balanced redox reaction at a stable rate mediated by mannose. In addition, different local electric field intensity distributions in response to various incident excitations were observed at the nanoscale, elucidating the need for irregular and inhomogeneous structures. AgNIS enabled a maximized 54.7-fold macroscopically amplified fluorescence and long-lasting photostability. Point-of-care availability was fulfilled using a customized smartphone prototype with well-paired optics. The eFIA effectively detected the PCa marker in cell lines, xenograft tumors, and patient sera. The plasmonic platform rendered a diagnostic sensitivity of 86.0% and a specificity of 94.7% and capably staged high-grade PCa that the clinical gold standard test failed to stratify. Patient prognosis of robotic-assisted surgeries and hormone therapies was non-invasively monitored following efficient medical interventions. The assay time was significantly curtailed on the plasmonic platform upon microwave irradiation.

Conclusions

By investigating the effects of reducing monosaccharides on the seed-mediated chemical synthesis of plasmonic Ag structures, we deduced that potent multiplexed fluorescence enhancement originated from both an adequate reducing power and a steady reduction rate. Furthermore, the inhomogeneous structure with adequate medium gap distances afforded optimal multiwavelength fluorescence enhancement, thus empowering an effective eFIA for PCa. The clinically validated diagnostic and prognostic features, along with the low sample volume, point-of-care feasibility with a smartphone, and microwave-shortened assay time, warrant its potential clinical translation for widespread cancer biomarker analysis.

Graphical Abstract

Low-concentration trypsin detection from a metal-enhanced fluorescence (MEF) platform: Towards the development of ultra-sensitive and rapid detection of proteolytic enzymes

Proteolytic enzymes, which serve to degrade proteins to their amino acid building blocks, provide a distinct challenge for both diagnostics and biological research fields. Due to their ubiquitous presence in a wide variety of organisms and their involvement in disease, proteases have been identified as biomarkers for various conditions. Additionally, low-levels of proteases may interfere with biological investigation, as contamination with these enzymes can physically alter the protein of interest to researchers, resulting in protein concentration loss or subtler polypeptide clipping that leads to a loss of functionality. Low levels of proteolytic degradation also reduce the shelf-life of commercially important proteins. Many detection platforms have been developed to achieve low-concentration or low-activity detection of proteases, yet many suffer from limitations in analysis time, label stability, and ultimately sensitivity. Herein we demonstrate the potential utility of fluorescein derivatives as fluorescent labels in a new, turn-off enzymatic assay based on the principles of metal-enhanced fluorescence (MEF). For fluorescein sodium salt alone on nano-slivered 96-well plates, or Quanta Plates™, we report up to 11,000x enhancement for fluorophores within the effective coupling or enhancement volume region, defined as ~100 nm from the silver surface. We also report a 9% coefficient of variation, and detection on the picomolar concentration scale. Further, we demonstrate the use of fluorescein isothiocyanate-labeled YebF protein as a coating layer for a MEF-based, Quanta Plate™ enzymatic activity assay using trypsin as the model enzyme. From this MEF assay we achieve a detection limit of ~1.89 ng of enzyme (2.8 mBAEE activity units) which corresponds to a minimum fluorescence signal decrease of 10%. The relative success of this MEF assay sets the foundation for further development and the tuning of MEF platforms for proteolytic enzyme sensing not just for trypsin, but other proteases as well. In addition, we discuss the future development of ultra-fast detection of proteases via microwave-accelerated MEF (MAMEF) detection technologies.

Rapid Sensing of Biological and Environmental Analytes Using Microwave-Accelerated Bioassays and a MATLAB Application

We report a method for rapid detection and analysis of biological and environmental analytes by microwave-accelerated bioassays (MABs) and a novel MATLAB-based image processing of colorimetric signals. In this regard, colorimetric bioassays for histidine-rich protein 2 (HRP-2) and microcystin-leucine arginine (MC-LR) toxin were carried out using MABs and without microwave heating (i.e, gold standard bioassays). Our MATLAB-based detection method is based on the direct correlation of color intensity of a solution calculated from images captured with a smartphone with the concentration of the biomolecule of interest using a MATLAB code developed in-house. We demonstrated that our MATLAB-based detection method can yield bioassay sensitivity comparable to the colorimetric gold standard tool, i.e., UV-Visible spectroscopy. In addition, colorimetric bioassay time for the HRP-2 assay (used in malaria diagnosis) and colorimetric MC-LR bioassay (used in MCLR toxin diagnosis) was reduced from up to 2 hours at room temperature without microwave heating to 15 minutes using the MABs technique.

Microwave-accelerated bioassay technique for rapid and quantitative detection of biological and environmental samples

Quantitative detection of molecules of interest from biological and environmental samples in a rapid manner, particularly with a relevant concentration range, is imperative to the timely assessment of human diseases and environmental issues. In this work, we employed the microwave-accelerated bioassay (MAB) technique, which is based on the combined use of circular bioassay platforms and microwave heating, for rapid and quantitative detection of Glial Fibrillary Acidic Protein (GFAP) and Shiga like toxin (STX 1). The proof-of-principle use of the MAB technique with the circular bioassay platforms for the rapid detection of GFAP in buffer based on colorimetric and fluorescence readouts was demonstrated with a 900W kitchen microwave. We also employed the MAB technique with a new microwave system (called the iCrystal system) for the detection of GFAP from mice with brain injuries and STX 1 from a city water stream. Control bioassays included the commercially available gold standard bioassay kits run at room temperature. Our results show that the lower limit of detection (LLOD) of the colorimetric and fluorescence based bioassays for GFAP was decreased by ~1000 times using the MAB technique and our circular bioassay platforms as compared to the commercially available bioassay kits. The overall bioassay time for GFAP and STX 1 was reduced from 4h using commercially available bioassay kits to 10min using the MAB technique.

Metal-Enhanced Fluorescence from Silver Nanowires with High Aspect Ratio on Glass Slides for Biosensing Applications

High enhancement of fluorescence emission, improved fluorophore photostability, and significant reduction of fluorescence lifetimes have been obtained from high aspect ratio (>100) silver (Ag) nanowires. These quantities are found to depend on the surface loading of Ag nanowires on glass slides, where the enhancement of fluorescence emission increases with the density of nanowires. The surface loading dependence was attributed to the creation of intense electric fields around the network of Ag nanowires and to the coupling of fluorophore excited states that takes place efficiently at a distance of 10 nm from the surface of nanowires, which was confirmed by theoretical calculations. The enhancement of fluorescence emission of fluorescein isothiocyanate (FITC) was assessed by fluorescence spectroscopy and fluorescence-lifetime imaging microscopy (FLIM) to demonstrate the potential of high aspect ratio Ag nanowires. Fluorescence enhancement factors exceeding 14 were observed on Ag nanowires with high loading by FLIM. The photostability of FITC was the highest on nanowires with medium loading under continuous laser excitation for 10 min because of the significant reduction in the fluorescence lifetime of FITC on these surfaces. These results clearly demonstrate the potential of Ag nanowires in metal-enhanced fluorescence-based applications of biosensing on planar surfaces and cellular imaging.

5-color multiplexed microwave-accelerated metal-enhanced fluorescence: detection and analysis of multiple DNA sequences from within one sample well within a few seconds

We present a potentially highly sensitive and selective bio-assay for the potential detection of any five different DNA sequences from one sample in one well. The assay is based on a DNA "rapid catch and signal" (DNA-RCS) technology developed for the detection of different DNA sequences from a sample well area. Our signal amplification utilizes the metal-enhanced fluorescence (MEF) of dyes attached to the probe-DNAs, which hybridizes with the pre-formed mixture of anchor-DNA scaffolds on silver island films (SiFs). Low-power microwave irradiation accelerates both the formation of the anchor-DNA scaffold on the SiF-surface and anchor/probe DNA hybridization, i.e. "rapid catch" of target DNAs from a bulk solution, decreasing the assay run time from hours to only a few seconds. Localization of signaling dye-labels close to the SiFs make them extremely photostable, which allows for collecting/integrating the signal over a long time period. To demonstrate a 5 color DNA assay (5-plex) we have used a range of readily available Alexa™ dyes. Advantages and perspectives of the RCS-technologies ability to detect 5 different DNA sequences from within one plate-well are discussed.

Experimental and theoretical study of the distance dependence of metal-enhanced fluorescence, phosphorescence and delayed fluorescence in a single system

Distance dependent singlet and triplet metal-enhanced emission of eosin from silica coated silver island films (SiFs) has been studied by steady-state and time resolved fluorescence techniques, along with theoretical finite difference time domain (FDTD) numerical simulations, to understand how the thickness of the dielectric coating surrounding silver nanoparticles fundamentally affects luminescence enhancement. Our findings suggest that the distance dependence of metal-enhanced phenomena such as fluorescence, phosphorescence and delayed fluorescence is underpinned by the decay of the electric near-field, and depending on the actual silver silica sample embodiment, one can see either decreased or enhanced luminescence. These results not only expand our current MEF thinking but also suggest that one may well be able to approximate plasmon-enhanced luminescence values.

Metal-enhanced fluorescence based excitation volumetric effect of plasmon-enhanced singlet oxygen and super oxide generation

In this contribution we show that the Metal-Enhanced Fluorescence (MEF) Excitation Volumetric Effect (EVE), has a profound effect on the formation of Reactive Oxygen Species (ROS), such as singlet oxygen ((1)O2) and superoxide anion radical (O2(-)*), when sensitizers are placed in close proximity to plasmon supporting nanoparticulate substrates. In particular, when the singlet oxygen sensitizer rose bengal is placed on a SiFs surface, i.e. on a silver island film, the (1)O2 response to power is non-linear, and at 100 mW excitation power (535 nm) it is about 5 times higher, as compared to glass control samples, measured with the commercially available (1)O2 probe Sensor Green™. We also report a similar power dependence of superoxide generation for acridine on SiFs surfaces, but using the dihydroethidium O2(-)* probe (DHE). Our findings are consistent with our previously postulated Metal-Enhanced Fluorescence (MEF) and EVE models.

Blind evaluation of the microwave-accelerated metal-enhanced fluorescence ultrarapid and sensitive Chlamydia trachomatis test by use of clinical samples

Accurate point-of-care (POC) diagnostic tests for Chlamydia trachomatis infection are urgently needed for the rapid treatment of patients. In a blind comparative study, we evaluated microwave-accelerated metal-enhanced fluorescence (MAMEF) assays for ultrafast and sensitive detection of C. trachomatis DNA from vaginal swabs. The results of two distinct MAMEF assays were compared to those of nucleic acid amplification tests (NAATs). The first assay targeted the C. trachomatis 16S rRNA gene, and the second assay targeted the C. trachomatis cryptic plasmid. Using pure C. trachomatis, the MAMEF assays detected as few as 10 inclusion-forming units/ml of C. trachomatis in less than 9 min, including DNA extraction and detection. A total of 257 dry vaginal swabs from 245 female adolescents aged 14 to 22 years were analyzed. Swabs were eluted with water, the solutions were lysed to release and to fragment genomic DNA, and MAMEF-based DNA detection was performed. The prevalence of C. trachomatis by NAATs was 17.5%. Of the 45 samples that were C. trachomatis positive and the 212 samples that were C. trachomatis negative by NAATs, 33/45 and 197/212 were correctly identified by the MAMEF assays if both assays were required to be positive (sensitivity, 73.3%; specificity, 92.9%). Using the plasmid-based assay alone, 37/45 C. trachomatis-positive and 197/212 C. trachomatis-negative samples were detected (sensitivity, 82.2%; specificity, 92.9%). Using the 16S rRNA assay alone, 34/45 C. trachomatis-positive and 197/212 C. trachomatis-negative samples were detected (sensitivity, 75.5%; specificity, 92.9%). The overall rates of agreement with NAAT results for the individual 16S rRNA and cryptic plasmid assays were 89.5% and 91.0%, respectively. Given the sensitivity, specificity, and rapid detection of the plasmid-based assay, the plasmid-based MAMEF assay appears to be suited for clinical POC testing.

A straightforward immunoassay applicable to a wide range of antibodies based on surface enhanced fluorescence

A straightforward immunoassay based on surface enhanced fluorescence (SEF) has been demonstrated using a fluorescent immune substrate and antibody functionalized-silver nanoparticles. Unlike the conventional SEF-based immunoassay, which usually uses the dye-labeled antibodies and the metallic nanostructured-substrates, the presented immune system does not need the antibodies to be labeled with dye molecules. Thus, this immunoassay can be easily applied to the detection of a wide range of target antigens, which is of great importance for its practical application. The experimental results show that this immunoassay has a good specificity as well as the capacity of quantitative detection. Basically, the surface density of the immuno-adsorbed silver nanoparticles increases with the increased amount of target antigens, resulting in a fluorescence enhancement up to around 7 fold. The dose-responsive performance of the immunoassay has been investigated and the limit of detection (LOD) is 1 ng/mL. Due to its simple preparation method and the wide range of detectable antigens, this presented immunoassay is expected to be helpful for extending the SEF-based application.

Design and Proof-of-Concept Use of a Circular PMMA Platform with 16-Well Sample Capacity for Microwave-Accelerated Bioassays

We demonstrate the design and the proof-of-concept use of a new, circular poly(methyl methacrylate)-based bioassay platform (PMMA platform), which affords for the rapid processing of 16 samples at once. The circular PMMA platform (5 cm in diameter) was coated with a silver nanoparticle film to accelerate the bioassay steps by microwave heating. A model colorimetric bioassay for biotinylated albumin (using streptavidin-labeled horse radish peroxidase) was performed on the PMMA platform coated with and without silver nanoparticles (a control experiment), and at room temperature and using microwave heating. It was shown that the simulated temperature profile of the PMMA platform during microwave heating were comparable to the real-time temperature profile during actual microwave heating of the constructed PMMA platform in a commercial microwave oven. The model colorimetric bioassay for biotinylated albumin was successfully completed in ~2 min (total assay time) using microwave heating, as compared to 90 min at room temperature (total assay time), which indicates a ~45-fold decrease in assay time. Our PMMA platform design afforded for significant reduction in non-specific interactions and low background signal as compared to non-silvered PMMA surfaces when employed in a microwave-accelerated bioassay carried out in a conventional microwave cavity.

Localized surface plasmon resonance: nanostructures, bioassays and biosensing--a review

Localized surface plasmon resonance (LSPR) is an optical phenomena generated by light when it interacts with conductive nanoparticles (NPs) that are smaller than the incident wavelength. As in surface plasmon resonance, the electric field of incident light can be deposited to collectively excite electrons of a conduction band, with the result being coherent localized plasmon oscillations with a resonant frequency that strongly depends on the composition, size, geometry, dielectric environment and separation distance of NPs. This review serves to describe the physical theory of LSPR formation at the surface of nanostructures, and the potential for this optical technology to serve as a basis for the development bioassays and biosensing of high sensitivity. The benefits and challenges associated with various experimental designs of nanoparticles and detection systems, as well as creative approaches that have been developed to improve sensitivity and limits of detection are highlighted using examples from the literature.

Ultra-fast and sensitive detection of non-typhoidal Salmonella using microwave-accelerated metal-enhanced fluorescence ("MAMEF")

Certain serovars of Salmonella enterica subsp. enterica cause invasive disease (e.g., enteric fever, bacteremia, septicemia, meningitis, etc.) in humans and constitute a global public health problem. A rapid, sensitive diagnostic test is needed to allow prompt initiation of therapy in individual patients and for measuring disease burden at the population level. An innovative and promising new rapid diagnostic technique is microwave-accelerated metal-enhanced fluorescence (MAMEF). We have adapted this assay platform to detect the chromosomal oriC locus common to all Salmonella enterica subsp. enterica serovars. We have shown efficient lysis of biologically relevant concentrations of Salmonella spp. suspended in bacteriological media using microwave-induced lysis. Following lysis and DNA release, as little as 1 CFU of Salmonella in 1 ml of medium can be detected in <30 seconds. Furthermore the assay is sensitive and specific: it can detect oriC from Salmonella serovars Typhi, Paratyphi A, Paratyphi B, Paratyphi C, Typhimurium, Enteritidis and Choleraesuis but does not detect Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumoniae, Streptococcus pneumoniae, Haemophilus influenzae or Acinetobacter baumanii. We have also performed preliminary experiments using a synthetic Salmonella oriC oligonucleotide suspended in whole human blood and observed rapid detection when the sample was diluted 1∶1 with PBS. These pre-clinical data encourage progress to the next step to detect Salmonella in blood (and other ordinarily sterile, clinically relevant body fluids).

Development of a microwave-accelerated metal-enhanced fluorescence 40 second, <100 cfu/ml point of care assay for the detection of Chlamydia trachomatis

An inexpensive technology to both lyse Chlamydia trachomatis (CT) and detect DNA released from CT within 40 s is demonstrated. In a microwave cavity, energy is highly focused using 100-nm gold films with "bow-tie" structures to lyse CT within 10 s. The ultrafast detection of the released DNA from less than 100 cfu/mL CT is accomplished in an additional 30 s by employing the microwave-accelerated metal-enhanced fluorescence technique. This new "release and detect" platform technology is a highly attractive alternative method for the lysing of bacteria, DNA extraction, and the fast quantification of bacteria and potentially other pathogenic species and cells as well. Our approach is a significant step forward for the development of a point of care test for CT.

Rapid Whole Blood Bioassays using Microwave-Accelerated Metal-Enhanced Fluorescence

The proof-of-principle demonstration of rapid whole blood bioassays based on microwave-accelerated metal-enhanced fluorescence (MAMEF) method using silver nanoparticle-deposited surfaces is presented. In this regard, spherical silver nanoparticles were deposited onto glass slides (silver nanoparticle films, SNFs) in a highly reproducible manner, which was assessed by optical absorption spectroscopy. Atomic force microscopy was employed to determine the size of the deposited silver nanoparticles. A model bioassay, based on the well-known interactions of biotinylated bovine serum albumin (b-BSA) and streptavidin was constructed on SNFs. The model bioassay was run at room temperature (metal-enhanced fluorescence (MEF)-based bioassay without microwave heating) for 60 minutes and with microwave heating (MAMEF-based bioassay) for 1 minute. In contrast to MEF-based bioassays that only allowed the use of samples in buffer solution, MAMEF-based bioassays afforded the use of whole blood samples. A lower detection limit of 1 nM and 0.01 nM for b-BSA was determined in MEF-based and MAMEF-based bioassays, respectively.

Sonication-assisted metal-enhanced fluorescence-based bioassays

A new bioassay technique, sonication-assisted metal-enhanced fluorescence, which is based on the combined use of ultrasound waves and metal-enhanced fluorescence (MEF), is reported. In this technique, low-intensity ultrasound waves significantly reduce the bioassay time by creating a temperature gradient between the bulk and the surface, which is thought to result in a mass transport of biomolecules from the bulk to the surface. After the assay is completed in 1 min, fluorescence emission is enhanced due to the MEF phenomenon. For proof-of-concept, a model bioassay based on the interactions of biotin and fluorophore-labeled avidin was constructed on SIFs and was subsequently completed in <1 min using low-intensity ultrasound at 40 kHz. The end-point values for fluorescence emission from sonicated assays were compared to those measured from assays carried out at room temperature without sonication to confirm to accuracy of the new technique. The effect of sonication on the assay components were studied using optical absorption spectroscopy, atomic force microscopy, and fluorescence spectroscopy techniques. Real-time thermal imaging was used to measure the changes in temperature of the bioassay components during the sonication process. Fluorescence resonance energy transfer (FRET) was also employed to investigate the effect of sonication on potential surface protein denaturation and conformational changes.

Metal-Enhanced Fluorescence (MEF): Physical Characterization of Siver-Island Films and Exploring Sample Geometries

In this study we have analyzed metal-enhanced fluorescence (MEF) effects from different density silver island films (SiFs) and the effects of sample geometry on the observed enhancement of fluorescence (EF). It is shown that silver islands grow exponentially with SiF deposition time (DT<7min), optical density of SiFs almost linearly depends on DT; electrical conductivity is zero. At DT>7 min, silver islands merge, exhibiting a sharp increase in electrical conductivity. It has been shown that the newly proposed SiF-Glass sample geometry exhibits higher EF values than the commonly used in MEF studies SiF-SiF sample geometry. The SiF-Glass geometry demonstrates high sensitivity for surface immunoassays, a growing application of metal-enhanced fluorescence.

Nanomaterials in fluorescence-based biosensing

Fluorescence-based detection is the most common method utilized in biosensing because of its high sensitivity, simplicity, and diversity. In the era of nanotechnology, nanomaterials are starting to replace traditional organic dyes as detection labels because they offer superior optical properties, such as brighter fluorescence, wider selections of excitation and emission wavelengths, higher photostability, etc. Their size- or shape-controllable optical characteristics also facilitate the selection of diverse probes for higher assay throughput. Furthermore, the nanostructure can provide a solid support for sensing assays with multiple probe molecules attached to each nanostructure, simplifying assay design and increasing the labeling ratio for higher sensitivity. The current review summarizes the applications of nanomaterials--including quantum dots, metal nanoparticles, and silica nanoparticles--in biosensing using detection techniques such as fluorescence, fluorescence resonance energy transfer (FRET), fluorescence lifetime measurement, and multiphoton microscopy. The advantages nanomaterials bring to the field of biosensing are discussed. The review also points out the importance of analytical separations in the preparation of nanomaterials with fine optical and physical properties for biosensing. In conclusion, nanotechnology provides a great opportunity to analytical chemists to develop better sensing strategies, but also relies on modern analytical techniques to pave its way to practical applications.

New tools for rapid clinical and bioagent diagnostics: microwaves and plasmonic nanostructures

In this timely review, we summarize recent work on ultra-fast and sensitive bioassays based on microwave heating, and provide our current interpretation of the role of the combined use of microwave energy and plasmonic nanostructures for applications in rapid clinical and bioagent diagnostics. The incorporation of microwave heating into plasmonic nanostructure-based bioassays brings new advancements to diagnostic tests. A temperature gradient, created by the selective heating of water in the presence of plasmonic nanostructures, results in an increased mass transfer of target biomolecules towards the biorecognition partners placed on the plasmonic nanostructures, enabling diagnostic tests to be completed in less than a minute, and in some cases only a few seconds, by further microwave heating. The diagnostic tests can also be run in complex biological samples, such as human serum and whole blood.

Microwave-accelerated surface plasmon-coupled directional luminescence 2: a platform technology for ultra fast and sensitive target DNA detection in whole blood

The application of Microwave-Accelerated Surface Plasmon-Coupled Luminescence (MA-SPCL) to fast and sensitive DNA hybridization assays in buffer and whole blood is presented. In this regard, a model DNA hybridization assay whereby a fluorophore-labeled target ssDNA specific to human immunodeficiency, Hepatitis C (Hep C), is probed by an anchor probe immobilized on thin gold films, is driven to completion within 1 min with microwave heating, as compared to an identical assay completed in approximately 4 h at room temperature. Finite-Difference Time-Domain calculations show that gold disks are preferentially heated around the edges creating a temperature gradient along the disks, which in turn results in the larger influx of complementary DNA towards anchor probe-modified surface. Thermal images of the assay platform during microwave heating also provide additional information on the microwave heating pattern in the microwave cavity. Finally, the effects of low power microwave heating on the ability of DNA to re-hybridize with the complimentary target on the surface gold films, which allows the multiple re-use of the gold films, is demonstrated. The MA-SPCL technique offers an alternative approach to current DNA based detection technologies, especially when speed and sensitivity are required, such as in the identification of DNA or even RNA-based diseases using whole blood samples that affect human health.

Gold nanoparticles for the development of clinical diagnosis methods

The impact of advances in nanotechnology is particularly relevant in biodiagnostics, where nanoparticle-based assays have been developed for specific detection of bioanalytes of clinical interest. Gold nanoparticles show easily tuned physical properties, including unique optical properties, robustness, and high surface areas, making them ideal candidates for developing biomarker platforms. Modulation of these physicochemical properties can be easily achieved by adequate synthetic strategies and give gold nanoparticles advantages over conventional detection methods currently used in clinical diagnostics. The surface of gold nanoparticles can be tailored by ligand functionalization to selectively bind biomarkers. Thiol-linking of DNA and chemical functionalization of gold nanoparticles for specific protein/antibody binding are the most common approaches. Simple and inexpensive methods based on these bio-nanoprobes were initially applied for detection of specific DNA sequences and are presently being expanded to clinical diagnosis. Figure Colorimetric DNA/RNA detection using salt induced aggregation of AuNP-DNA nanoprobes.

Real-time Thermal Imaging of Microwave Accelerated Metal-Enhanced Fluorescence (MAMEF) Based Assays on Sapphire Plates

In this paper, we describe an optical geometry that facilitates our further characterization of the temperature changes above silver island films (SiFs) on sapphire plates, when exposed to microwave radiation. Since sapphire transmits IR, we designed an optical scheme to capture real-time temperature images of a thin water film on sapphire plates with and without SiFs during the application of a short microwave pulse. Using this optical scheme, we can accurately determine the temperature profile of solvents in proximity to metal structures when exposed to microwave irradiation. We believe that this optical scheme will provide us with a basis for further studies in designing metal structures to further improve plasmonic-fluorescence clinical sensing applications, such as those used in microwave accelerated metal-enhanced fluorescence (MAMEF).

Microwave-accelerated metal-enhanced fluorescence: application to detection of genomic and exosporium anthrax DNA in <30 seconds

We describe the ultra-fast and sensitive detection of the gene encoding the protective antigen of Bacillus anthracis the causative agent of anthrax. Our approach employs a highly novel platform technology, Microwave-Accelerated Metal-Enhanced Fluorescence (MAMEF), which combines the use of Metal-Enhanced Fluorescence to enhance assay sensitivity and focused microwave heating to spatially and kinetically accelerate DNA hybridization. Genomic and exosporium target DNA of Bacillus anthracis spores was detected within a minute in the nanograms per microliter concentration range using low-power focused microwave heating. The MAMEF technology was able to distinguish between B. anthracis and B. cereus, a non-virulent close relative. We believe that this study has set the stage and indeed provides an opportunity for the ultra-fast and specific detection of B. anthracis spores with minimal pre-processing steps using a relatively simple but cost-effective technology that could minimize casualties in the event of another anthrax attack.

Microwave-accelerated ultrafast nanoparticle aggregation assays using gold colloids

In this paper, the proof of principle of microwave-accelerated aggregation assay technology, which shortens the solution-based aggregation assays' run time to seconds (>100-fold increase in kinetics) with microwave heating, was demonstrated using a model aggregation assay based on the well-known interactions of biotin and avidin. Biotinylated gold colloids were aggregated in solution with the addition of streptavidin, which takes 20 min at room temperature to reach >90% completion and only 10 s with microwave heating. The initial velocity (after 1-s microwave heating) of the biotinylated gold colloids reaches up to 10.5 m/s, which gives rise to greater sampling of the total volume but not a large increase in bulk temperature. The room-temperature, steady-state velocity of the colloids was <0.5 microm/s. In control experiments, where streptavidin preincubated with d-biotin in solution is added to biotinylated gold colloids and microwave heated, gold colloids did not aggregate, demonstrating that nonspecific interactions between biotinylated gold colloids and streptavidin were negligible.

Microwave energy: a versatile tool for the biosciences

As the range of techniques for microwave heating has expanded, so have the areas in which it can have a profound impact. Two emerging areas are the application of microwave heating for the synthesis of peptides, peptoids, oligopeptides and carbohydrates and in the field of proteomics.

Metal-Enhanced Fluorescence from Gold Surfaces: Angular Dependent Emission

The first observation of Metal-Enhanced Fluorescence (MEF) from large gold colloids is presented. Gold colloids, 40 and 200 nm diameter, were deposited onto glass substrates in a homogeneous fashion. The angular-dependent fluorescence emission of FITC-HSA, adsorbed onto gold colloids, was measured on a rotating stage which was used to evaluate MEF at all spatial angles. The emission intensity of FITC-HSA was found to be up to 2.5-fold brighter than the emission on bare glass substrates at an angle of 270 degrees. This is explained by the Radiating Plasmon Model, whereby the combined system, composed of the fluorophore and the metal colloids, emits with the photophysical characteristics of the fluorophore, after the excitation and the partial radiationless energy transfer between the excited states of the fluorophore and the surface plasmons of the gold colloids. The fluorescence enhancement was found to be higher with 200 nm gold colloids as compared to 40 nm colloids due to the increased contribution of the scattering portion of the 200 nm gold colloid extinction spectrum. These observations suggest that gold colloids could be used in MEF applications, offering more stable surfaces than the commonly used silvered surfaces, for applications requiring longer term storage and use.

Microwave-Triggered Metal-Enhanced Chemiluminescence (MT-MEC): Application to Ultra-fast and Ultra-sensitive Clinical Assays

In this rapid communication we describe a new approach to protein detection with chemiluminescence. By combining common practices in protein detection with chemiluminescence, microwave technology, and metal-enhanced chemiluminescence, we show that we can use low power microwaves to substantially increase enzymatic chemiluminescent reaction rates on metal substrates. As a result, we have found that we can in essence trigger chemiluminescence with low power microwave (Mw) pulses and ultimately, perform on-demand protein detection assays. Using microwave triggered metal-enhanced chemiluminescence (MT-MEC), we not only improve the sensitivity of immunoassays with enhanced signal-to-noise ratios, but we also show that we can accurately quantify protein concentrations by integrating the photon flux for discrete time intervals.