Assessment of lamellar level properties in mouse bone utilizing a novel spherical nanoindentation data analysis method

Increased tissue modulus and hardness in the TallyHO mouse model of early onset type 2 diabetes mellitus

Individuals with type 2 diabetes mellitus (T2DM) have a higher fracture risk compared to those without T2DM despite having higher bone mineral density (BMD). Thus, T2DM may alter other aspects of resistance to fracture beyond BMD such as bone geometry, microarchitecture, and tissue material properties. We characterized the skeletal phenotype and assessed the effects of hyperglycemia on bone tissue mechanical and compositional properties in the TallyHO mouse model of early-onset T2DM using nanoindentation and Raman spectroscopy. Femurs and tibias were harvested from male TallyHO and C57Bl/6J mice at 26 weeks of age. The minimum moment of inertia assessed by micro-computed tomography was smaller (-26%) and cortical porosity was greater (+490%) in TallyHO femora compared to controls. In three-point bending tests to failure, the femoral ultimate moment and stiffness did not differ but post-yield displacement was lower (-35%) in the TallyHO mice relative to that in C57Bl/6J age-matched controls after adjusting for body mass. The cortical bone in the tibia of TallyHO mice was stiffer and harder, as indicated by greater mean tissue nanoindentation modulus (+22%) and hardness (+22%) compared to controls. Raman spectroscopic mineral:matrix ratio and crystallinity were greater in TallyHO tibiae than in C57Bl/6J tibiae (mineral:matrix +10%, p < 0.05; crystallinity +0.41%, p < 0.10). Our regression model indicated that greater values of crystallinity and collagen maturity were associated with reduced ductility observed in the femora of the TallyHO mice. The maintenance of structural stiffness and strength of TallyHO mouse femora despite reduced geometric resistance to bending could potentially be explained by increased tissue modulus and hardness, as observed at the tibia. Finally, with worsening glycemic control, tissue hardness and crystallinity increased, and bone ductility decreased in TallyHO mice. Our study suggests that these material factors may be sentinels of bone embrittlement in adolescents with T2DM.

Nanomechanical testing in drug delivery: Theory, applications, and emerging trends

Mechanical properties play a central role in drug formulation development and manufacturing. Traditional characterization of mechanical properties of pharmaceutical solids relied mainly on large compacts, instead of individual particles. Modern nanomechanical testing instruments enable quantification of mechanical properties from the single crystal/particle level to the finished tablet. Although widely used in characterizing inorganic materials for decades, nanomechanical testing has been relatively less employed to characterize pharmaceutical materials. This review focuses on the applications of existing and emerging nanomechanical testing methods in characterizing mechanical properties of pharmaceutical solids to facilitate fast and cost-effective development of high quality drug products. Testing of pharmaceutical materials using nanomechanical techniques holds potential to develop fundamental knowledge in the structure-property relationships of molecular solids, with implications for solid form selection, milling, formulation design, and manufacturing. We also systematically discuss pitfalls and useful tips during sample preparation and testing for reliable measurements from nanomechanical testing.

Cinacalcet Improves Bone Parameters Through Regulation of Osteoclast Endoplasmic Reticulum Stress, Autophagy, and Apoptotic Pathways in Chronic Kidney Disease-Mineral and Bone Disorder

The possible mechanisms underlying the quantitative and qualitative effects of cinacalcet on bone were explored in a chronic kidney disease-mineral and bone disorder (CKD-MBD) mouse model in relation to the influence of the interactions among the osteoclast (OC) endoplasmic reticulum (ER) stress, autophagy and apoptosis pathways on OC differentiation. Body weight and biochemical parameters improved significantly in the CKD + cinacalcet groups compared to the CKD group. Micro-computed tomography (μCT) revealed both cortical and trabecular parameters deteriorated significantly in the CKD group and were reversed by cinacalcet in a dose-dependent manner. Nanoindentation analysis of bone quality proved that both cortical hardness and elastic modulus improved significantly with high dose cinacalcet treatment. In vitro studies revealed that cinacalcet inhibited receptor activator of NF-κB ligand (RANKL)/receptor activator of NF-κB (RANK)-induced OC differentiation in a concentration-dependent manner through a close interaction between activation of caspase-related apoptosis, reversal of OC autophagy through the protein kinase B (Akt)/mammalian target of rapamycin (mTOR) and adenosine monophosphate-activated protein kinase (AMPK) pathways, and attenuation of the OC ER stress/CREBH/NFATc1 signaling pathway. Cinacalcet improves both bone quantity and bone quality in CKD mouse model and inhibits OC differentiation through regulation of the interactions among the apoptosis, ER stress, and autophagy pathways within OCs. © 2021 American Society for Bone and Mineral Research (ASBMR).

Tissue Engineering for Periodontal Ligament Regeneration: Biomechanical Specifications

The periodontal biomechanical environment is very difficult to investigate. By the complex geometry and composition of the periodontal ligament (PDL), its mechanical behavior is very dependent on the type of loading (compressive versus tensile loading; static versus cyclic loading; uniaxial versus multiaxial) and the location around the root (cervical, middle, or apical). These different aspects of the PDL make it difficult to develop a functional biomaterial to treat periodontal attachment due to periodontal diseases. This review aims to describe the structural and biomechanical properties of the PDL. Particular importance is placed in the close interrelationship that exists between structure and biomechanics: the PDL structural organization is specific to its biomechanical environment, and its biomechanical properties are specific to its structural arrangement. This balance between structure and biomechanics can be explained by a mechanosensitive periodontal cellular activity. These specifications have to be considered in the further tissue engineering strategies for the development of an efficient biomaterial for periodontal tissues regeneration.

Modeling Complex Orthopedic Trauma in Rodents: Bone, Muscle and Nerve Injury and Healing

Orthopedic injury can occur from a variety of causes including motor vehicle collision, battlefield injuries or even falls from standing. Persistent limb pain is common after orthopedic injury or surgery and presents a unique challenge, as the initiating event may result in polytrauma to bone, muscle, and peripheral nerves. It is imperative that we understand the tissue-specific and multicellular response to this unique type of injury in order to best develop targeted treatments that improve healing and regeneration. In this Mini Review we will first discuss current rodent models of orthopedic trauma/complex orthotrauma. In the second section, we will focus on bone-specific outcomes including imaging modalities, biomechanical testing and immunostaining for markers of bone healing/turnover. In the third section, we will discuss muscle-related pathology including outcome measures of fibrosis, muscle regeneration and tensile strength measurements. In the fourth section, we will discuss nervous system-related pathology including outcome measures of pain-like responses, both reflexive and non-reflexive. In all sections we will consider parallels between preclinical outcome measures and the functional and mechanistic findings of the human condition.

Multimodal Evaluation of the Spatiotemporal Variations of Periprosthetic Bone Properties

Titanium implants are widely used in dental and orthopedic surgeries. However, implant failures still occur because of a lack of implant stability. The biomechanical properties of bone tissue located around the implant need to be assessed to better understand the osseointegration phenomena and anticipate implant failure. The aim of this study was to explore the spatiotemporal variation of the microscopic elastic properties of newly formed bone tissue close to an implant. Eight coin-shaped Ti6Al4V implants were inserted into rabbit tibiae for 7 and 13 weeks using an in vivo model allowing the distinction between mature and newly formed bone in a standardized configuration. Nanoindentation and micro-Brillouin scattering measurements were carried out in similar locations to measure the indentation modulus and the wave velocity, from which relative variations of bone mass density were extracted. The indentation modulus, the wave velocity and mass density were found to be higher (1) in newly formed bone tissue located close to the implant surface, compared to mature cortical bone tissue, and (2) after longer healing time, consistently with an increased mineralization. Within the bone chamber, the spatial distribution of elastic properties was more heterogeneous for shorter healing durations. After 7 weeks of healing, bone tissue in the bone chamber close to the implant surface was 12.3% denser than bone tissue further away. Bone tissue close to the chamber edge was 16.8% denser than in its center. These results suggest a bone spreading pathway along tissue maturation, which is confirmed by histology and consistent with contact osteogenesis phenomena.

Regional Nanoindentation Properties in Different Locations on the Mouse Tibia From C57BL/6 and Balb/C Female Mice

The local spatial heterogeneity of the material properties of the cortical and trabecular bone extracted from the mouse tibia is not well-known. Nevertheless, its characterization is fundamental to be able to study comprehensively the effect of interventions and to generate computational models to predict the bone strength preclinically. The goal of this study was to evaluate the nanoindentation properties of bone tissue extracted from two different mouse strains across the tibia length and in different sectors. Left tibiae were collected from four female mice, two C57BL/6, and two Balb/C mice. Nanoindentations with maximum 6 mN load were performed on different microstructures, regions along the axis of the tibiae, and sectors (379 in total). Reduced modulus (Er) and hardness (H) were computed for each indentation. Trabecular bone of Balb/C mice was 21% stiffer than that of C57BL/6 mice (20.8 ± 4.1 GPa vs. 16.5 ± 7.1 GPa). Moreover, the proximal regions of the bones were 13-36% less stiff than the mid-shaft and distal regions of the same bones. No significant differences were found for the different sectors for E _r and H for Balb/C mice. The bone in the medial sector was found to be 8-14% harder and stiffer than the bone in the anterior or posterior sectors for C57BL/6 mice. In conclusion, this study showed that the nanoindentation properties of the mouse tibia are heterogeneous across the tibia length and the trabecular bone properties are different between Balb/C and C57BL/6 mice. These results will help the research community to identify regions where to characterize the mechanical properties of the bone during preclinical optimisation of treatments for skeletal diseases.

Functional disuse initiates medullary endosteal micro-architectural impairment in cortical bone characterized by nanoindentation

In this study, we evaluated the effect of functional disuse-induced bone remodeling on its mechanical properties, individually at periosteum and medullary endosteum regions of the cortical bone. Left middle tibiae were obtained from 5-month-old female Sprague-Dawley rats for the baseline control as well as hindlimb suspended (disuse) groups. Micro-nano-mechanical elastic moduli (at lateral region) was evaluated along axial (Z), circumferential (C) and radial (R) orientations using nanoindentation. Results indicated an anisotropic microstructure with axial orientation having the highest and radial orientation with the lowest moduli at periosteum and medullary endosteum for both baseline control as well as disuse groups. Between the groups: at periosteum, an insignificant difference was evaluated for each of the orientations (p > 0.05) and at endosteum, a significant decrease of elastic moduli in the radial (p < 0.0001), circumferential (p < 0.001) and statistically insignificant difference in axial (p > 0.05) orientation. For the moduli ratios between groups: at periosteum, only significant difference in the Z/R (p < 0.05) anisotropy ratio, whereas at endosteum, a statistically significant difference in Z/C (p < 0.001), and Z/R (p < 0.001), as well as C/R (p < 0.05) anisotropy ratios, was evaluated. The results suggested initial bone remodeling impaired bone micro-architecture predominantly at the medullary endosteum with possible alterations in the geometric orientations of collagen and mineral phases inside the bone. The findings could be significant for studying the mechanotransduction pathways involved in maintaining the bone micro-architecture and possibly have high clinical significance for drug use against impairment from functional disuse.

Assessing bone quality through mechanical properties in postmenopausal trabecular bone

BACKGROUND

The inner structure of trabecular bone is a result of structural optimization provided by remodeling processes. Changes in hormonal status related to menopause cause bone tissue loss and micro-architectural deterioration with a consequent susceptibility to fracture. Accumulation of micro-damage in bone, as a function of the rate of production and rate of repair, underlies the development of stress fractures, increasing fragility associated to age and osteoporosis, especially in transmenopausal women.

PATIENTS AND METHODS

Quasi-static and nano-dynamic mechanical characterization were undertaken in trabecular bone from femoral neck biopsies of postmenopausal women. AFM (Atomic Force Microscopy) complementary studies were performed to determine nano-roughness (SRa) and the fibrils width of collagen. Nanoindentations were used to quantify transmenopausal changes in intrinsic mechanical properties of trabecular bone: hardness (Hi), modulus of Young (Ei), complex modulus (E*), tan delta (δ), storage modulus (E') and loss modulus (E").

RESULTS

As result of the quasi-static measurements, 0.149 (0.036) GPa and 2.95 (0.73) GPa of Hi and Ei were obtained, respectively. As result of the nano-dynamic measurements, 17.94 (3.15), 0.62 (0.10), 13.79 (3.21 and 6.39 (1.28) GPa of E*, tan (δ), E' and E" were achieved, respectively. 101.07 SRa and 831.28 nm of fibrils width were additionally obtained.

CONCLUSIONS

This study poses a first approach to the measurement of bone quality in postmenopausal trabecular bone by combining quasi-static, nano-DMA analysis and tribology of dentin surface through AFM characterization.

Biochemical assessment of nanostructures in human trabecular bone: Proposal of a Raman microspectroscopy based measurements protocol

BACKGROUND

Improvements to the understating of the compositional contributions of bone mineral and organic components to the competence of trabecular bone are crucial. The purpose of this study was to propose a protocol to study biochemical composition of trabecular bone, based on two combined Raman analysis methodologies.

MATERIAL AND METHODS

Both cluster and single point Raman mappings were obtained, in order to assess bone degeneration associated with aging, disease, or injury, and to help in the evaluation and development of successful therapies. In this study, human trabecular bone has been analysed throughout a) Raman cluster analysis: bone mineral content, carbonate-to-phosphate ratio (both from the mineral components), the crosslinking and nature/secondary structure of collagen (both from the organic components); and b) Single point Raman spectra, where Raman points related to the minerals and organic components were also obtained, both techniques were employed in spectra attained at 400 to 1700 cm^-1.

RESULTS

Multivariate analysis confirmed: 1) the different spectral composition, 2) the existence of centroids grouped by chemical affinity of the various components of the trabecular bone, and 3) the several traces of centroids and distribution of chemical compositional clusters.

CONCLUSIONS

This study is important, because it delivers a study protocol that provides molecular variations information in both mineral and collagen structure of trabecular bone tissue. This will enable clinicians to benefit knowing the microstructural differences in the bone subjected to degeneration of their patients.

Nanostructure in the trabecular bone of postmenopausal women: Mechanical and chemical analysis

The possibility of diagnosis and prediction of multiple disorders in trabecular bone through nano-biomechanics and chemical analysis are summarized. Improvements to the understating of the compositional contributors of bone mineral and organic components to mechanical competence are crucial. Viscoelastic properties and Raman characterization have been used to evaluate possible alterations of the trabecular bone associated with aging, disease, or injury. In this study, the trabecular bone of postmenopausal women has been analyzed throughout. (a) Nanomechanical characterization, by using nano-DMA: complex modulus, tan δ, loss modulus (E'), and storage modulus (E'); and (b) Raman analysis: relative presence of minerals, carbonate-to-phosphate ratio (both from the mineral components), the crosslinking and nature/secondary structure of collagen (both from the organic components). Complementary nano-morphological studies were done assessing roughness (SRa) and collagen fibrils width, on this trabecular bone. A general idea of the behavior of the viscoelastic performance can be obtained by the Tan δ (E″/E'), that achieved 0.98GPa of damping. 249nm and 0.898μm of SRa roughness and fibrils width were obtained, respectively. The relative presence of minerals, the carbonate-to-phosphate ratio, the crosslinking and the nature/secondary structure of collagen, between 700 and 1700cm^-1, were also obtained, in order to propose a study protocol for trabecular bone characterization.

Probing nanoscale damage gradients in ion-irradiated metals using spherical nanoindentation

We discuss and demonstrate the application of recently developed spherical nanoindentation stress-strain protocols in characterizing the mechanical behavior of tungsten polycrystalline samples with ion-irradiated surfaces. It is demonstrated that a simple variation of the indenter size (radius) can provide valuable insights into heterogeneous characteristics of the radiation-induced-damage zone. We have also studied the effect of irradiation for the different grain orientations in the same sample.

Vibrational spectroscopic techniques to assess bone quality

Although musculoskeletal diseases such as osteoporosis are diagnosed and treatment outcome is evaluated based mainly on routine clinical outcomes of bone mineral density (BMD) by DXA and biochemical markers, it is recognized that these two indicators, as valuable as they have proven to be in the everyday clinical practice, do not fully account for manifested bone strength. Thus, the term bone quality was introduced, to complement considerations based on bone turnover rates and BMD. Bone quality is an "umbrella" term that incorporates the structural and material/compositional characteristics of bone tissue. Vibrational spectroscopic techniques such as Fourier transform infrared microspectroscopy (FTIRM) and imaging (FTIRI), and Raman spectroscopy, are suitable analytical tools for the determination of bone quality as they provide simultaneous, quantitative, and qualitative information on all main bone tissue components (mineral, organic matrix, tissue water), in a spatially resolved manner. Moreover, the results of such analyses may be readily combined with the outcomes of other techniques such as histology/histomorphometry, small angle X-ray scattering, quantitative backscattered electron imaging, and nanoindentation.

Tissue-Level Mechanical Properties of Bone Contributing to Fracture Risk

Tissue-level mechanical properties characterize mechanical behavior independently of microscopic porosity. Specifically, quasi-static nanoindentation provides measurements of modulus (stiffness) and hardness (resistance to yielding) of tissue at the length scale of the lamella, while dynamic nanoindentation assesses time-dependent behavior in the form of storage modulus (stiffness), loss modulus (dampening), and loss factor (ratio of the two). While these properties are useful in establishing how a gene, signaling pathway, or disease of interest affects bone tissue, they generally do not vary with aging after skeletal maturation or with osteoporosis. Heterogeneity in tissue-level mechanical properties or in compositional properties may contribute to fracture risk, but a consensus on whether the contribution is negative or positive has not emerged. In vivo indentation of bone tissue is now possible, and the mechanical resistance to microindentation has the potential for improving fracture risk assessment, though determinants are currently unknown.

Spatial distribution and remodeling of elastic modulus of bone in micro-regime as prediction of early stage osteoporosis

We assessed the local distribution of bone mechanical properties on a micro-nano-scale and its correlation to strain distribution. Left tibia samples were obtained from 5-month old female Sprague Dawley rats, including baseline control (n=9) and hindlimb suspended (n=9) groups. Elastic modulus was measured by nanoindentation at the dedicated locations. Three additional tibias from control rats were loaded axially to measure bone strain, with 6-10N at 1Hz on a Bose machine for strain measurements. In the control group, the difference of the elastic modulus between periosteum and endosteum was much higher at the anterior and posterior regions (2.6GPa), where higher strain differences were observed (45μɛ). Minimal elastic modulus difference between periosteum and endosteum was observed at the medial region (0.2GPa), where neutral axis of the strain distribution was oriented with lower strain difference (5μɛ). In the disuse group, however, the elastic modulus differences in the anterior posterior regions reduced to 1.2GPa from 2.6GPa in the control group, and increased in the medial region to 2.7GPa from 0.2GPa. It is suggested that the remodeling rate in a region of bone is possibly influenced by the strain gradient from periosteum to endosteum. Such pattern of moduli gradients was compromised in disuse osteopenia, suggesting that the remodeling in distribution of micro-nano-elastic moduli among different regions may serve as a predictor for early stage of osteoporosis.

Contributions of Raman spectroscopy to the understanding of bone strength

Raman spectroscopy is increasingly commonly used to understand how changes in bone composition and structure influence tissue-level bone mechanical properties. The spectroscopic technique provides information on bone mineral and matrix collagen components and on the effects of various matrix proteins on bone material properties as well. The Raman spectrum of bone not only contains information on bone mineral crystallinity that is related to bone hardness but also provides information on the orientation of mineral crystallites with respect to the collagen fibril axis. Indirect information on collagen cross-links is also available and will be discussed. After a short introduction to bone Raman spectroscopic parameters and collection methodologies, advances in in vivo Raman spectroscopic measurements for animal and human subject studies will be reviewed. A discussion on the effects of aging, osteogenesis imperfecta, osteoporosis and therapeutic agents on bone composition and mechanical properties will be highlighted, including genetic mouse models in which structure-function and exercise effects are explored. Similarly, extracellular matrix proteins, proteases and transcriptional proteins implicated in the regulation of bone material properties will be reviewed.

The kidney sodium-phosphate co-transporter alters bone quality in an age and gender specific manner

Mutations in the kidney NaPiIIa co-transporter are clinically associated with hypophosphatemia, hyperphosphaturia (phosphate wasting), hypercalcemia, nephrolithiasis and bone demineralization. The mouse lacking this co-transporter system was reported to recover its skeletal defects with age, but the "quality" of the bones was not considered. To assess changes in bone quality we examined both male and female NaPiIIa knockout (KO) mice at 1 and 7months of age using micro-computed tomography (micro-CT) and Fourier transform infrared imaging (FTIRI). KO cancellous bones at both ages had greater bone volume fraction, trabecular thickness and lesser structure model index based on micro-CT values relative to age- and sex-matched wildtype animals. There was a sexual-dimorphism in the micro-CT parameters, with differences at 7months seen principally in males. Cortical bone at 1month showed an increase in bone volume fraction, but this was not seen at 7months. Cortical thickness which was elevated in the male and female KO at 1month was lower in the male KO at 7months. FTIRI showed a reduced mineral and acid phosphate content in the male and female KO's bones at 1month with no change in acid phosphate content at 7months. Collagen maturity was reduced in KO cancellous bone at 1month. The observed sexual dimorphism in the micro-CT data may be related to altered phosphate homeostasis, differences in animal growth rates and other factors. These data indicate that the bone quality of the KO mice at both ages differs from the normal and suggests that these bone quality differences may contribute to skeletal phenotype in humans with mutations in this co-transporter.