Ultramorphological and Histochemical Changes After ER,CR:YSGG Laser Irradiation and Two Different Irrigation Regimes

The efficacy of 2780 nm Er,Cr;YSGG and 940 nm Diode Laser in root canal disinfection: A randomized clinical trial

OBJECTIVES

Effective disinfection of the root canals is the cornerstone of successful endodontic treatment. Diminishing the microbial load within the root canal system is crucial for healing in endodontically treated teeth. The aim of this study was to evaluate the effect of 2780 nm Er,Cr:YSGG and 940 nm diode lasers on the eradication of microorganisms from single-rooted teeth with asymptomatic apical periodontitis.

MATERIALS AND METHODS

Thirty participants conforming to the inclusion criteria were randomly divided into 3 groups according to the disinfection protocol used; Conventional group: 2.5% Sodium Hypochlorite (NaOCl) and 17% EDTA solution NaOCl/EDTA, Dual laser group: 2780 nm Erbium, chromium: yttrium scandium-gallium-garnet (Er,Cr:YSGG) laser and 940 nm diode laser Er,CrYSGG/Diode, and Combined group: 17% EDTA and 940 nm diode laser EDTA/Diode. Bacterial samples were collected before and after intervention. The collected data were statistically analyzed using Friedman's test and Kruskal-Wallis test (P ≤ 0.05).

RESULTS

The results of the study showed that both dual laser Er,CrYSGG/Diode and combined laser EDTA/Diode groups showed significantly less mean Log10 CFU/ml of aerobic and anaerobic bacterial counts than the conventional NaOCl/EDTA group.

CONCLUSIONS

In this study we evaluated in vivo the bactericidal efficacy of three disinfection protocols for endodontic treatment of single-rooted teeth with apical periodontitis. The results indicated that both dual laser Er,CrYSGG/Diode and combined laser EDTA/Diode groups provide superior bactericidal effect compared to the conventional NaOCl/EDTA group.

CLINICAL RELEVANCE

The integration of lasers into root canal disinfection protocols has demonstrated significant bacterial reduction which might promote healing and long-term success.

Evaluation of Er:YAG and Er,Cr:YSGG lasers on intraradicular bonding using modified glass fiber tips

The aim of this study was to determine whether erbium laser irradiation emitted by modified glass-fiber tips would improve the intraradicular bonding of fiber posts. Forty human canines were endodontically treated and prepared for fiber-post placement. Roots were divided into five groups (n=8); according to the laser-tip combinations (2,940 nm Er:YAG and 2,780 nm Er,Cr:YSGG). Non-irradiated root canals served as control. Posts were cemented with self-adhesive resin cement and subjected to push-out test. Failure modes were characterized, and intraradicular bonded interfaces were analyzed by SEM and submitted to nanoleakage evaluation. Data were analyzed by two-way ANOVA and Tukey test (α=0.05). No significant differences were observed in cervical and middle sections (p>0.05), while significantly higher bond strengths were observed in apical sections (p<0.05). Laser irradiation reduced adhesive failures, cement-dentin gap formation, and nanoleakage apically. Laser-irradiation protocols employing end- or radial-firing tips improved bonding to apical intraradicular dentin contributing to more uniform bonded interfaces.

Photobiomodulation Therapy and Pulp-Regenerative Endodontics: A Narrative Review

Regenerative endodontic procedures (REPs) were used to recover the dental pulp’s vitality in order to avoid the undesirable outcomes of conventional endodontic treatment and to promote dentinal formation, especially for immature permanent teeth. Photobiomodulation therapy (PBMT) exhibits photobiological and photochemical effects for improving the root canal’s environmental conditions by compensating for oxidative stress and increasing the blood supply to implanted stem cells and improving their survival. Basic research has revealed that PBMT can modulate human dental pulp stem cells’ (hDPSCs) differentiation, proliferation, and activity, and subsequent tissue activation. However, many unclear points still remain regarding the mechanisms of action induced by PBMT in REPs. Therefore, in this review, we present the applications of laser and PBMT irradiation to the procedures of REPs and in endodontics. In addition, the effects of PBMT on the regenerative processes of hDPSCs are reviewed from biochemical and cytological perspectives on the basis of the available literature. Furthermore, we consider the feasibility of treatment in which PBMT irradiation is applied to stem cells, including dental pulp stem cells, and we discuss research that has reported on its effect.

Efficacy of curcumin-mediated photodynamic therapy for root canal therapy procedures: A systematic review

BACKGROUND

This systematic review aimed to investigate the effectiveness of CUR-mediated PDT (Curcumin mediated PDT) as an adjunct to conventional chemo-mechanical debridement and/or standard PDT of the RC system with endodontic infections.

METHODS

The focused research question was: "Whether the application Curcumin mediated PDT as an adjunct is more effective than the traditional chemo-mechanical debridement and/or standard PDT of the RC system alone for improving antibacterial and/or mechanical features among subjects undergoing RCT?". An electronic literature search was performed in Scopus, PubMed, and Web of Science. In vitro reports utilizing Curcumin mediated PDT as an adjunct to conventional chemo-mechanical debridement considering permanent dentition assessing the antibacterial and/or mechanical effect were included.

RESULTS

Eighteen articles were included in the review, out of which 13 studies assessed the antibacterial activity, while 5 evaluated the mechanical properties. Most of the studies concluded that Curcumin mediated PDT had a significant antibacterial activity than the conventional chemo-mechanical debridement and/or standard PDT. Four of the five studies suggested that Curcumin mediated PDT had no impact on the push-out bond strength of root dentin. Furthermore, the significant heterogeneity in the data from the included studies did not permit the author to carry out a meta-analysis.

CONCLUSION

There is potential for application of Curcumin mediated PDT as an adjunct to the conventional chemo-mechanical debridement and/or standard PDT in reducing the bacterial load, however, Curcumin mediated PDT has minimal effect on enhancing the pushout bond strength of fiber posts to radicular dentin. Moreover, clinical studies are required to provide a more conclusive opinion on the efficacy of Curcumin mediated PDT for RCT procedures.

Influence of irrigation and laser assisted root canal disinfection protocols on dislocation resistance of a bioceramic sealer

BACKGROUND

It is not yet clear how different irrigation protocols and intracanal laser irradiation effects bioceramic sealers. In this vitro study, we aimed to evaluate the dislocation resistance of a bioceramic root canal sealer after different laser-assisted disinfection protocols and irrigants.

METHODS

Sixty extracted human straight single-canal teeth were instrumented, and randomly divided into five experimental groups (n=10) according to the disinfection protocol used: group 1, conventional needle irrigation (CI) with sodium hypochlorite (NaOCl)+ethylenediaminotetraacetic acid (EDTA)+NaOCl; group 2, Photon initiated photoacoustic streaming (PIPS) of NaOCl+EDTA+NaOCl; group 3, NaOCl+EDTA+diode laser; group 4, NaOCl+EDTA+photodynamic therapy (PDT); group 5, CI with NaOCl+EDTA+Chlorhexidine (CHX); and control group without any treatment. The root canals were filled with a bioceramic root canal sealer (BioRoot RCS) using the single-cone filling technique. After three weeks of storage, the samples from each canal thirds were transversely sectioned and the push-out test was performed.

RESULTS

The PIPS group showed the lowest dislocation resistance values in the coronal third (p>0.05), and no difference was observed among the other groups (p<0.05). The dislocation resistance in the middle and apical thirds was the highest in the diode laser group (p<0.05).

CONCLUSION

Final root canal irradiation with diode laser led to improved dislocation resistance of the bioceramic sealer. PDT did not adversely affect the dislocation resistance of BioRoot RCS. The PIPS reduced the dislocation resistance values in the coronal third, but not in the middle and apical thirds.

Bactericidal effect of Er,Cr:YSGG laser irradiation on endodontic biofilm: An ex vivo study

AIM

This ex vivo study aimed to evaluate the of Er,Cr:YSGG laser effectiveness in the decontamination of an endodontic biofilm.

MATERIALS AND METHODS

Seventy-three single rooted human teeth, freshly were chosen. Each tooth was exposed to four associated species in an endodontic biofilm (Enterococcus faecalis, Streptococcus salivarius, Porphyromonas gingivalis, and Prevotella intermedia) and randomly allocated to one of the seven experimental groups. The group 1 (7 teeth) was used to finalize the reliable biofilm-forming technique. The groups 2 and 3 (15 teeth each group) were irradiated with two different Er;Cr:YSGG laser settings (0,75 W - 40 Hz and 4 W - 40 Hz, respectively). The groups 4 and 5 (15 teeth each group) were irrigated with two different solutions and laser irradiated with the same settings (1,5 W - 15 Hz). The group 6 (6 teeth) was the control group treated only with 4 ml 2,5% NaOCl irrigation during 60 s.

RESULTS

The observations of group 2 and 3 specimens showed the ripeness of the biofilm with the presence of Enterococcus faecalis and Streptococcus salivarius in chains but in group 3 thermal edge effects produced by the optic fiber in the canal walls were present. The group 4 specimens observation showed an average cleaning of the root canal walls while on the canal walls of group 5 samples the apical third presented several debris and smear layer and in the centre cracks and melting dentin of the radicular wall were observed.

CONCLUSION

In those experimental conditions, this study, demonstrated that Er,Cr:YSGG laser has a canals decontamination ability when associated to NaOCl irrigation.

Disinfection of Root Canals with Laser-Activated Irrigation, Photoactivated Disinfection, and Combined Laser Techniques: An Ex Vivo Preliminary Study

Objective: This study aimed to evaluate the efficacy of laser-activated irrigation using photon-induced photoacoustic streaming (PIPS^®) and photoactivated disinfection (PAD) techniques and their combination to improve penetration and activation of toluidine blue in the endodontic space of teeth experimentally infected with Enterococcus faecalis. Materials and methods: Twenty-seven extracted single-root teeth were instrumented, sterilized, and infected with E. faecalis and divided into seven groups of three teeth each: Group A [sodium hypochlorite (NaClO) 5% hand irrigation], Group B [NaClO 5% hand irrigation+ethylenediaminetetraacetic acid (EDTA)+NaClO 5% activated by PIPS], Group C (EDTA+NaClO 5% activated by PIPS), Group D (toluidine blue activated by PAD), Group E (toluidine blue activated by PIPS and PAD), Group F (NaClO 5% hand irrigation+toluidine blue activated by PAD), and Group G (NaClO 5% hand irrigation+toluidine blue activated by PIPS and PAD). Finally, positive and negative group controls were prepared. The presence of biofilms after the treatments was assessed by the BioTimer assay. PIPS was performed with an Er:YAG laser (2940 nm, LightWalker, Fotona^® d.o.o., Slovenia) at 20 mJ, 15 Hz, 0.3 W, and 50-μs pulse duration. PAD was performed with a 635 nm diode laser (Smart M, Lasotronix^®, Poland) at 400 mW in continuous wave (CW). Results: When NaClO was used, significant decontamination (p ≤ 0.05) was obtained in all experimental groups with respect to the positive control, other than Group G. Irrigation with EDTA+NaClO activated by PIPS produced a higher level of decontamination than Group A (p ≤ 0.05). Significant results in reducing biofilm load compared with the control and Group A were observed when NaClO was coupled with toluidine blue activated by PAD (p ≤ 0.05). Conclusions: Disinfection of root canals can be obtained using a combination of different irrigants, photosensitizers, and activation protocols. EDTA+NaClO using the PIPS protocol and toluidine blue activated by PAD (both preceded by NaClO irrigation) can be considered effective tools. The possibility of replacing NaClO with toluidine blue, whatever the method of activation, should be further investigated.

Impact of photodynamic therapy on the push-out bond strength of fiber posts to root dentin: A systematic review and meta-analysis

BACKGROUND AND PURPOSE

This systematic review documents the up-to-date evidence on the efficacy of photodynamic therapy (PDT) on the push-out bond strength of fiber posts cemented to root dentin.

MATERIALS AND METHODS

The focused PICO question was: "What impact does PDT have on the push-out bond strength of fiber posts cemented to root dentin?" This systematic review followed the guidelines and recommendations reported in the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA) guidelines chart. An electronic search was performed in MEDLINE/PubMed, SCOPUS, Web of Science, and Embase from January 1980 up to and including January 2020. Heterogeneity was calculated for push-out bond strength by means of the Chi-square test and I² statistics. For meta-analyses, if the I² was higher than 50 %, a random effects model was used, otherwise a fixed effects model for I² ≤50 % was applied. A p-value <0.05 was set for significant heterogeneity. Forest plots were computed reporting standard mean differences (SMD) of outcomes and 95 % confidence intervals (CI).

RESULTS

In total, ten studies were included, all of wich demonstrated medium risk of bias. All studies tested the push-out bond strength by means of a universal testing machine with applying a load ranging between 0.5 and 1 mm/min speed. Of the 10 studies, nine (90 %) indicated that PDT had no effect on push-out bond strength of fiber posts to root dentin. Only one study indicated that PDT significantly improved the bond strength when compared with other control groups. The overall mean difference for push out bond strength showed no statistically significant difference between PDT and the control group (SMD = -1.11 [-3.25, 1.02], Z=-1.02, p = 0.305).

CONCLUSION

This systematic review concludes that PDT has no effect on improving the push-out bond strength of fiber posts to root dentin.

Evaluation of Antimicrobial Efficacy and Penetration Depth of Various Irrigants into the Dentinal Tubules with and without Lasers: A Stereomicroscopic Study

Aim

To evaluate and compare the antibacterial efficacy and horizontal depth of penetration of various irrigants into the dentinal tubules when used alone and when combined with lasers.

Materials and methods

An experimental study was done on 42 single-rooted teeth. Access cavity preparation was done and the canals were enlarged up to a ProTaper file size F2 of length 25 mm. They were inoculated with 0.1 mL of Enterococcus faecalis and the samples were randomly assigned into six different groups of seven teeth each. The following irrigation systems were used individually and in combinations—normal saline, sodium hypochlorite, chlorhexidine gluconate, diode laser and erbium, chromium: ytrrium scandium gallium garnet laser (Er,Cr:YSGG laser). The colony-forming units (CFU) of bacteria before and after disinfection and the penetration depth of different groups were determined. Statistical analysis was done by an ANOVA test.

Results

The highest number of CFU of bacteria was shown by the group where saline was used and it also showed the least penetration depth compared to that of the Er,Cr:YSGG laser group.

Conclusion

Er,Cr:YSGG laser when used along with sodium hypochlorite and chlorhexidine gluconate showed the highest reduction in the CFU of bacteria and the greatest penetration depth when observed under a stereomicroscope.

Clinical significance

Laser-assisted irrigation regimes have a high antibacterial efficacy and more penetration depth into the dentinal tubules.

How to cite this article

Subramani SM, Anjana G, et al. Evaluation of Antimicrobial Efficacy and Penetration Depth of Various Irrigants into the Dentinal Tubules with and without Lasers: A Stereomicroscopic Study. Int J Clin Pediatr Dent 2019;12(4):273–279.

Bactericidal Effect of 2780 nm Er,Cr:YSGG Laser Combined with 940 nm Diode Laser in Enterococcus faecalis Elimination: A Comparative Study

Objective: This study aims to compare the bactericidal efficacy of different Er,Cr:YSGG disinfection methods, particularly combined application of Er,Cr:YSGG and Diode laser. Background: Root canal disinfection is important for long-term endodontic success. Different laser systems are proposed as alternatives to conventional techniques in bacterial elimination. Materials and methods: Ninety-five straight, single-rooted premolars with similar canal dimensions were selected. After the mechanical preparation, the samples were sterilized, and root canals were infected with Enterococcus faecalis. The samples were randomly divided into five groups (n = 15): 5% NaOCl, Er,Cr:YSGG, Er,Cr:YSGG +5% NaOCl, Er,Cr:YSGG + Diode, and control group. Results: The maximal bacterial elimination was observed in Er,Cr:YSGG + NaOCl group (p < 0.005). More bacteria were found in Er,Cr:YSGG and Er,Cr:YSGG + Diode groups compared with 5% NaOCl group (p < 0.005). Marginal significance was detected between the Er,Cr:YSGG group and the Er,Cr:YSGG + Diode group (p = 0.091). Conclusions: The most successful E. faecalis elimination was obtained from laser-activated irrigation group. As combined application of Er,Cr:YSGG and Diode laser gives suggestive results, further studies with larger sample sizes are needed to clarify the outcome.

Efficacy of phototherapy in the adhesive bonding of different dental posts to root dentin: A systematic review

BACKGROUND

The aim of the current systematic review was to evaluate the efficacy of phototherapy in the adhesive bonding of different dental posts to root dentin.

METHODS

The outline of this systematic review followed the PRISMA (Preferred Reporting Items for Systematic Review and Meta-Analysis) guidelines. Searches in both electronic and manual literature were performed in the main databases 'MEDLINE' and 'EMBASE' up to March 2019 using the following terms: (Phototherapy) AND (push out test) AND (bond strength) AND (post) OR (fibre) OR (metal) AND (smear layer).

RESULTS

Six in-vitro studies were included and processed for data extraction. All studies incorporated the use of fiber posts. The mean shear bond strength for test group ranged from 2.23 to 15.17 MPa while mean shear bond strength for control group ranged from 2.93 to 9.38 MPa. The wavelengths of diode lasers ranged from 660 to 2940 nm (nm). Power was reported in 5 studies ranging from 0.075 W to 3 W. All studies compared shear bond strength of phototherapy in the adhesive bonding of different dental posts to root dentin. In all the included studies, greater bond strength achieved by phototherapy compared to nonirradiated group.

CONCLUSION

Within the limits, this study shows that the dentin to post bond strength was significantly enhanced by phototherapy.

Evaluation of chemical and morphological changes in radicular dentin after different final surface treatments

The aim of this study was to evaluate the chemical and morphological effects of different lasers as a final surface treatment for endodontic therapy through energy dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) respectively. Twenty-five maxillary canines were selected and instrumented with K3 system. Roots were randomly distributed into five groups (n = 5) according to the surface treatment: GI (distilled water), GII (NaOCl + EDTA), GIII (NaOCl + EDTA + 980 nm diode laser), GIV (NaOCl + EDTA+ 1,064 nm Nd:YAG laser), and GV (NaOCl + EDTA+ 2,780 nm Er, Cr:YSGG laser). Lasers were applied for 20 s and samples were bisected, exposing the treated surface and then subjected to elements quantification by EDS and morphological evaluation by scanning electron microscope (SEM). EDS data were submitted to ANOVA-two way, and SEM scores were submitted to two-way Kruskal-Wallis and Dunn's tests. The EDS analysis showed no difference for the chemical elements and Ca/P ratio between groups (p > .05). Statistical analysis showed more intense results for GV and less intense results for GI (p < .05). The GIII showed an amorphous organic matrix surface, while GV provided greater removal of intertubular dentin forming craters, and GIV promoted dentin fusion. The EDS method used in this study was not able to verify any chemical changes in root canal dentin; Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser were capable of modifying the dentin morphology, correlating characteristics features for each one, which are essential clinical knowledge to establish the correct indication for each case. RESEARCH HIGHLIGHTS: EDS was not able to verify any chemical changes in root canal dentin after 980 nm diode, Nd:YAG and Er;Cr:YSGG laser treatments Nd:YAG, Er, Cr:YSGG, and 980 nm diode laser modified dentin morphology, correlating characteristics features for each one.

Effects of different treatments on chemical and morphological features of eroded dentin

To evaluate the treatment of eroded dentin (Sensodyne Repair & Protect™, Er:YAG laser and combinations). The occlusal surfaces of 25 third molars were sectioned 1.5 mm in thickness. After an erosion cycle (5 min in demineralizing solution + 3 h in remineralizing solution; six cycles a day for 8 days), the samples were divided into five groups (n = 5): (E) erosion - control; (ES) erosion + Sensodyne Repair & Protect (NovaMin); (EL) erosion + Er:YAG laser (40 mJ, 10 Hz, 0.4 W, 50 μs, 3.1 J/cm², 63 W/cm²); (ELS) erosion + Er:YAG laser + Sensodyne; and (ESL) erosion + Sensodyne + Er:YAG laser. Following storage in ultrapure water (37 °C/14 days), the Ca/P ratio was evaluated by EDXRF and the morphology surfaces examined in SEM. The percentage of exposed dentin tubules was calculated. One-way analysis of variance and Tukey's test at 5% were used to treat the data. The Ca/P ratio was higher in E and ES groups. More exposed dentin tubules were found in E group and less exposed tubules were found in the ES group (p < 0.0001). When the toothpaste and laser were combined, the number of occluded dentin tubules was higher when laser was performed first (ELS). A positive effect was found when the laser and toothpaste were combined.

The effect of ultrasonically activated irrigation and laser based root canal irrigation methods on debris removal

PURPOSE

To test the efficacy of debris removal of 5 in vitro irrigation protocols: conventional irrigation, irrigation activated by ultrasound, Er:YAG laser with photon-induced photoacoustic streaming (PIPS) tip, and 2 diode laser techniques.

METHODS

The root canals of 75 extracted human canine teeth were enlarged and bisected longitudinally. Standardized grooves were prepared 2-6 mm from the root apex and filled with 0.5 mm of dentine debris. The teeth were reassembled and irrigated using 1 of the following techniques (n = 15/technique): (1) conventional irrigation, (2) diode laser irrigation - tip placed 2 mm from working length, (3) diode laser irrigation - tip placed at root canal orifice, (4) Er:YAG laser - PIPS, and (5) ultrasonically activated irrigation. The root segments were disassembled, and the amount of remaining debris was evaluated by 3 examiners under a stereomicroscope at ×20 magnification using a 4-grade scoring system. The data were statistically analyzed using Kruskal-Wallis and Dunn's multiple comparison tests, with a 95% confidence level (p = 0.05). Cohen's kappa test was used to evaluate inter-observer and intra-observer agreement.

RESULTS

Ultrasonically activated irrigation removed significantly more dentinal debris than conventional irrigation (p = 0.016), but there were no significant differences between the other groups.

CONCLUSIONS

Ultrasonically activated irrigation was more effective than conventional irrigation in the removal of apically placed dentine debris.

Effects of Root Debridement With Hand Curettes and Er:YAG Laser on Chemical Properties and Ultrastructure of Periodontally-Diseased Root Surfaces Using Spectroscopy and Scanning Electron Microscopy

Introduction: The efficacy of erbium-doped yttrium aluminum garnet (Er:YAG) laser for root debridement in comparison with curettes has been the subject of many recent investigations. Considering the possibility of chemical and ultra-structural changes in root surfaces following laser irradiation, this study sought to assess the effects of scaling and root planing (SRP) with curettes and Er:YAG laser on chemical properties and ultrastructure of root surfaces using spectroscopy and scanning electron microscopy (SEM). Methods: In this in vitro experimental study, extracted sound human single-rooted teeth (n = 50) were randomly scaled using manual curettes alone or in conjunction with Er:YAG laser at 100 and 150 mJ/pulse output energies. The weight percentages of carbon, oxygen, phosphorous and calcium remaining on the root surfaces were calculated using spectroscopy and the surface morphology of specimens was assessed under SEM. Data were analyzed using one-way analysis of variance (ANOVA). Results: No significant differences (P > 0.05) were noted in the mean carbon, oxygen, phosphorous and calcium weight percentages on root surfaces following SRP using manual curettes with and without laser irradiation at both output energies. Laser irradiation after SRP with curettes yielded rougher surfaces compared to the use of curettes alone. Conclusion: Although laser irradiation yielded rougher surfaces, root surfaces were not significantly different in terms of chemical composition following SRP using manual curettes with and without Er:YAG laser irradiation. Er:YAG laser can be safely used as an adjunct to curettes for SRP.

Effect of EndoActivator and Er,Cr:YSGG laser activation of Qmix, as final endodontic irrigant, on sealer penetration: A Confocal microscopic study

Background

Through chemomechanical debridement of the root canal is a primary requisite for successful endodontic therapy. Thus the aim of this study was to evaluate the effects of using QmiX alone, QmiX with EndoActivator and QmiX with Er,Cr:YSGG laser for final irrigation on sealer penetration into the dentinal tubules.

Material and Methods

75 extracted human mandibular premolar teeth were treated with sodium hypochlorite (NaOCl) irrigation. The samples were divided into 5 groups according to the final irrigation solution used: (1) 17% EDTA and 2.5% NaOCl, (2) QmiX (3) QmiX with Er,Cr:YSGG laser and (4) QmiX with EndoActivator (5) 2.5%NaOCl. All teeth were obturated using cold lateral condensation technique with gutta percha and AH 26 sealer (Dentsply; DeTrey,Konstanz, Germany) labeled with Rhodamine B dye. The teeth were sectioned at distances of 2 and 5 from root apex. Total percentage and maximum depth of sealer penetration were measured using confocal laser scanning microscopy.

Results

Results of one way Anova analysis showed that there was a significant difference in the percentage and depth of sealer penetration among all groups at 3 and 5 mm level sections (P < .05). Within the groups maximum sealer penetration was recorded for Er,Cr:YSGG laser activated group. Greater depth of sealer penetration was recorded at 5mm as compared to 3mm in all the groups.

Conclusions

Activation of QMix using EndoActivator and Er,Cr:YSGG laser enhanced the sealer penetration at apical and middle third. Thus Er,Cr:YSGG laser and EndoActivator may act as an appropriate adjunct during chemomechanical preparation of the root canal.

Key words:EndoActivator, Er,Cr:YSGG laser, Qmix, confocal microscopy, sealer penetration.

Endodontic Treatment of an Autogenous Transplanted Tooth Using an Er,Cr:YSGG Laser and Radial Firing Tips: Case Report

OBJECTIVE AND BACKGROUND

Although several surgical techniques have been reported, no study has yet reported alternative strategies for endodontic treatment of autogenous transplanted teeth. Therefore, the aim of this clinical report is to present the long-term endodontic outcome of a nonvital autogenously transplanted third molar treated with an Er,Cr:YSGG laser and radial firing tips (RFTs).

CASE REPORT

Autogenous tooth transplantation can be considered an alternative to restore edentulous areas and, in donor's teeth with complete root formation, root canal treatment should be performed up to 14 days following transplantation. In the present case report, the patient returned only after 6 months, with clinical and radiological signs of apical periodontitis (AP) associated with the transplanted tooth.

METHODS

Instead of traditional endodontic chemical irrigants or medications, the protocol for smear-layer removal and root canal disinfection was based on intracanal irradiation with an Er,Cr:YSGG laser and RFTs.

RESULTS

After 3-years' follow-up, the complete reestablishment of the periodontal ligament and the arrest of the resorptive process could be noticed.

CONCLUSIONS

This protocol has shown to be effective for the endodontic treatment of a transplanted multi-rooted tooth with AP. Further randomized clinical trials should be conducted to clearly demonstrate the effectiveness of this laser-assisted endodontic protocol.

Efficacy of Er,Cr:YSGG laser in removing smear layer and debris with two different output powers

OBJECTIVE

The purpose of this study was to evaluate the effectiveness of the erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser in removing debris and the smear layer using two different output powers on the apical, middle, and coronal segments of root canal walls.

BACKGROUND DATA

Previous literature has failed to evaluate the exclusive effect of Er,Cr:YSGG laser on the quality of smear layer and debris removal in all three segments of the root canal space.

METHODS

Sixty extracted teeth were included in the study. After instrumentation, samples were divided into three experimental groups and one positive control group with no further treatment. In group 1, a final irrigation was performed using ethylenediaminetetraacetic acid (EDTA) and sodium hypochlorite (NaOCl), sequentially. In group 2, the samples were treated with a 2.78 μm Er,Cr:YSGG laser with an output power of 1.5 W. The same laser was used in group 3, but with an output power of 2.5 W. Scanning electron microscope (SEM) images from the coronal, middle, and apical thirds of the roots were prepared and evaluated for both smear layer and debris removal by three blinded observers.

RESULTS

The results showed no differences between groups 1 and 2 regarding the quality of smear layer removal in all areas. However, the 2.5 W laser failed to remove the smear layer effectively. Regarding debris removal, the EDTA and NaOCl irrigation showed significantly better outcomes (adjusted p<0.05) in all areas.

CONCLUSIONS

This study raises questions about the overall cleaning abilities of Er,Cr:YSGG lasers.

Investigation of Coronal Leakage of Root Fillings after Smear Layer Removal with EDTA or Er,Cr:YSGG Laser through Capillary Flow Porometry

No studies have been performed evaluating the marginal seal of root fillings after direct exposure of root canal (RC) walls to Er,Cr:YSGG laser irradiation. Therefore, 75 root filled teeth (5 × 15–cold lateral condensation) were analyzed for through-and-through leakage (TTL) using capillary flow porometry (CFP). The cleaning protocol determined the experimental groups: (1) irrigation with NaOCl 2.5% and EDTA 17% or standard protocol (SP), (2) SP + Er,Cr:YSGG lasing (dried RC), (3) NaOCl 2.5% + Er,Cr:YSGG lasing (dried RC), (4) SP + Er,Cr:YSGG lasing (wet RC), and (5) NaOCl 2.5% + Er,Cr:YSGG lasing (wet RC). Groups 6 to 10 consisted of the same filled teeth with resected apices. Resection was performed after the first CFP measurement. CFP was used to assess minimum, mean flow, and maximum pore diameters after 48 h. Statistics were performed using nonparametric tests (P > 0.05). Additional three roots per group were submitted to SEM of the RC walls. TTL was observed in all groups without statistically significant differences between the different groups for minimum, mean, and maximum pore diameter (P > 0.05). In this study, the use of EDTA and/or Er,Cr:YSGG laser did not reduce through-and-through leakage in nonresected and resected roots.

Evaluation of an automated system for root canal irrigation: a scanning electron microscopy study

This study evaluated a new automated system using alternative irrigants for root canal cleaning treatments. This method relies on a system inserting an enzymatic solution based on Trypsin flowing inside the pulp chambers and root canals, completely avoiding traditional endodontic instrumentation. Sixty freshly extracted human molar teeth were randomly divided into 4 groups to assess 3 regimens (R1-3) differing in 0.25% Trypsin/EDTA and 5% Sodium Hypochlorite (NaOCl) solutions administration. Scanning electron microscopy observations and scores taking into account changes in dentin tubules were used to assess treatment effects in pulp chambers and roots. Significant changes in root cleaning ability relative to administration timing were observed, with the best results found in R3, with scheduled alternated cycles of Trypsin/EDTA and NaOCl inside the tooth. The non-invasive root canal method demonstrates good teeth cleaning ability independent of root morphology. This equipment may provide lower discomfort levels for patients undergoing endodontic treatment.

A comparative scanning electron microscopy evaluation of smear layer removal from teeth with different irrigation solutions and lasers

The aim of this study was to evaluate the efficacy of smear layer removal from teeth following root canals using lasers (Er:YAG and Nd:YAG), NaOCl, 17% EDTA, and MTAD by scanning electron microscopy (SEM). Root canals were irrigated with 3 mL of 5.25% NaOCl after each file. Teeth were randomly divided into five groups. In the final irrigation, canals were irrigated with 5.25% NaOCl (Group 1, control), 17% EDTA (Group 2), or BioPure MTAD (Group 3). Laser groups were irradiated with Er:YAG laser (1.8 W, 120 mJ, 15 Hz) (Group 4) or Nd:YAG laser (1 W, 100 mJ, 15 Hz) (Group 5). The smear layer at the apical, middle, and coronal thirds of each root canal was imaged using SEM. Smear layer removal by EDTA was the most effective in all regions. The difference between EDTA and MTAD was statistically significant in the coronal and middle (p < 0.05), but not the apical (p > 0.05), regions. The difference between the control and laser groups was not statistically significant (p > 0.05). In all regions, the difference between 17% EDTA-MTAD and the control-laser groups was statistically significant (p < 0.05). Although improvement was observed in removal of the smear layer using alternative materials and techniques, application of a combination of EDTA and NaOCl remains an effective technique.

The effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement

PURPOSE

The purpose of this study was to compare the effect of a diode laser and traditional irrigants on the bond strength of self-adhesive cement.

MATERIALS AND METHODS

Fifty-five incisors extracted due to periodontal problems were used. All teeth were instrumented using a set of rotary root canal instruments. The post spaces were enlarged for a No.14 (diameter, 1.4 mm) Snowlight (Abrasive technology, OH, USA) glass fiber reinforced composite post with matching drill. The teeth were randomly divided into 5 experimental groups of 11 teeth each. The post spaces were treated with the followings: Group 1: 5 mL 0.9% physiological saline; Group 2: 5 mL 5.25% sodium hypochlorite; Group 3: 5 mL 17% ethylene diamine tetra acetic acid (EDTA), Group 4: 37% orthophosphoric acid and Group 5: Photodynamic diode laser irradiation for 1 minute after application of light-active dye solution. Snowlight posts were luted with self-adhesive resin cement. Each root was sectioned perpendicular to its long axis to create 1 mm thick specimens. The push-out bond strength test method was used to measure bond strength. One tooth from each group was processed for scanning electron microscopic analysis.

RESULTS

BOND STRENGTH VALUES WERE AS FOLLOW: Group 1 = 4.15 MPa; Group 2 = 3.00 MPa; Group 3 = 4.45 MPa; Group 4 = 6.96 MPa; and Group 5 = 8.93 MPa. These values were analysed using one-way ANOVA and Tukey honestly significant difference test (P<.05). Significantly higher bond strength values were obtained with the diode laser and orthophosphoric acid (P<.05). There were no differences found between the other groups (P>.05).

CONCLUSION

Orthophosphoric acid and EDTA were more effective methods for removing the smear layer than the diode laser. However, the diode laser and orthophosphoric acid were more effective at the cement dentin interface than the EDTA, Therefore, modifying the smear layer may be more effective when a self-adhesive system is used.

The effect of Er,Cr:YSGG laser irradiation on the push-out bond strength of RealSeal self-etch sealer

OBJECTIVE

The aim of this study was to evaluate the effect of an erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser on the push-out bond strength of RealSeal Self-Etch (SE) sealer.

BACKGROUND DATA

Various methods are used for smear layer removal in endodontics, such as the application of Er,Cr:YSGG lasers. This laser system may influence the bond strength of resin-based sealers.

METHODS

Sixty single-rooted extracted teeth were selected. After root canal preparation, samples were divided into two experimental groups and one positive control group (n=20 per group). In group 1, the smear layer was removed by irrigation with ethylenediaminetetraacetic acid (EDTA) and sodium hypochlorite (NaOCl). In group 2, the smear layer was removed using a 2.78 μm Er,Cr:YSGG laser with radial firing tips (RFT3) (parameters: 1.5 W, 140 μs, 20 Hz, and 15% water to 15% air ratio), moving at 2 mm/sec in an apico-coronal direction. Group 3 served as a positive control group. Five specimens from each group were selected for scanning electron microscope (SEM) observation. The remaining 45 roots were obturated with RealSeal SE/Resilon and subjected to push-out tests. Data were analyzed using one way analysis of variance (ANOVA) and Tamhane's test.

RESULTS

The results showed no significant difference between push-out bond strength of root canal fillings in the EDTA+NaOCl group and the 1.5 W laser group (p>0.05). The positive control group showed the lowest push-out bond strength.

CONCLUSIONS

The results of the present study indicate that the application of an Er,Cr:YSGG laser with radial firing tips did not adversely affect the push-out bond strength of RealSeal SE sealer to dentin.

A comparison of residual smear layer and erosion following different endodontic irrigation protocols tested under clinical and laboratory conditions

OBJECTIVE

To compare the smear layer removal efficacy and erosive effects of different irrigation protocols under clinical and laboratory conditions.

MATERIALS AND METHODS

Mandibular third molars (n = 32) of 30-45 year-old patients were instrumented with rotary files and were randomly assigned to one of the following groups for final irrigation: (1) 5.25% NaOCl; (2) 17% EDTA; and (3) BioPure MTAD. Thereafter, the teeth were immediately extracted and processed for micromorphological investigation. In vitro specimen pairs were prepared by repeating the clinical experiments on freshly-extracted mandibular third molars. To compare open and closed systems, laboratory experiments were repeated on 32 additional teeth with enlarged apical foramen. The cleanliness of the root canals and the extent of erosion were assessed by environmental scanning electron microscopy.

RESULTS

Specimens prepared under clinical and laboratory conditions had similar cleanliness and erosion scores (p > 0.05). Under both conditions, the tested solutions were more effective in removing the smear layer in the coronal and middle regions than in the apical one. Comparison of closed and open systems showed similar levels of cleanliness and erosion in all regions (p > 0.05), with the exception of 17% EDTA showing significantly higher levels of cleanliness and erosion in the apical third of open-end specimens.

CONCLUSIONS

Based on clinical correlates of in vitro root canal cleanliness and erosion, laboratory testing of root canal irrigants on extracted teeth with closed apices can serve as a reliable method to simulate the clinical condition. EDTA was the most effective final irrigation solution in removing the smear layer at the expense of yielding the greatest erosive effect.

Evaluation of microleakage of root canal fillings irradiated with different output powers of erbium, chromium:yttrium-scandium-gallium-garnet laser

This study evaluated the root canal seal achieved by irradiation with an erbium, chromium:yttrium-scandium-gallium-garnet laser, and the optimal output power to remove debris and the smear layer were determined. One hundred mandibular premolar teeth were prepared and divided into four groups. Group 1 was not lased but was irrigated with 5 mL of 5.25% NaOCl and 5 mL of 17% ethylenediaminetetraacetic acid. Group 2 was irradiated at a panel setting of 1 W, group 3 at 2 W and group 4 at 2.5 W, with a 50% water level and 48% air-cooling level. Root canals were obturated by cold lateral compaction, and apical microleakage was measured using a fluid filtration model. The remaining debris and smear layer were evaluated via scanning electron microscopy. Statistically significant differences were detected between groups. Irradiation at 1 and 2 W using an erbium, chromium:yttrium-scandium-gallium-garnet laser produced a seal superior to that of the other treatments.

Influence of the hydration state on the ultrashort laser ablation of dental hard tissues

Since about 40 years, laser-based surgical tools have been used in medicine and dentistry to improve clinical protocols. In dentistry, femtosecond lasers have been claimed to be a potential ablation tool. It would, however, be good to perform a more fundamental investigation to understand ablation interaction mechanisms and possible side effects, depending on different specific components of the target tissue. The goal of this study is to show the changes of ablation characteristics in the femtosecond regime at different levels of structural water within dental hard tissues. Thirty human teeth samples were split into three hydration groups and subdivided into dentin and enamel groups (n = 5). The specimens were irradiated using a 70-fs Ti:sapphire laser (with a 1-kHz repetition rate and a 801-nm wavelength output). Ablation was performed using five different power levels and three exposure times. The results clearly show an inversely proportional dependence of the ablation threshold to the hydration level of the tissues. A known mathematical model was adapted in order to include the influence of the changes on the relative fractional composition of dental hard tissues. This analysis was consistent with the experimental results regarding the ablation threshold. High thermal and mechanical damages were observed as a high repetition rate had been applied. Macroscopic images and scanning electron microscopy images were used to preliminarily analyze both the thermal and mechanical damage thresholds, and their variations according to the hydration level present. By manipulating the hydration states, the modifications in the proportions of the molecules that build dental hard tissues clearly shift, and therefore, the characteristics of a plasma-induced ablation change.

Temperature changes on the root surfaces of mandibular incisors after an 810-nm high-intensity intracanal diode laser irradiation

Temperature changes caused by laser irradiation can promote damage to the surrounding dental tissues. In this study, we evaluated the temperature changes of recently extracted human mandibular incisors during intracanal irradiation with an 810-nm diode laser at different settings. Fifty mandibular incisors were enlarged up to an apical size of ISO No. 40 file. After the final rinse with 17% ethylenediaminetetraacetic acid, 0.2% lauryl sodium sulfate biologic detergent, and sterile water, samples were irradiated with circular movements from apex to crown through five different settings of output power (1.5, 2.0, 2.5, 3.0, and 3.5 W) in continuous mode. The temperature changes were measured on both sides of the apical and middle root thirds using two thermopar devices. A temperature increase of 7 °C was considered acceptable as a safe threshold when applying the diode laser.

RESULTS

The results showed that only 3.5-W output power increased the outer surface temperature above the critical value.

CONCLUSION

The recommended output power can be stipulated as equal to or less than 3 W to avoid overheating during diode laser irradiation on thin dentin walls.

Performance assessment of novel side firing safe tips for endodontic applications

During root canal or periodontal treatment, directing laser energy onto the walls of the root canal is essential for effective disinfection. This study assessed the performance of four different fiber modifications that have increased lateral emission, including three designs with safe tips to reduce irradiation directed toward the root apex. Free-running pulsed infrared lasers (Nd:YAG, Er:YAG, and Er,Cr:YSGG) and a diode laser (980 nm) were used in combination with plain ended (forward emitting) laser fibers; conical laser fibers, side firing honeycomb pattern fibers without a safe end; honeycomb fibers with silver coated ends, conical fibers with selectively abraded tips, and selectively abraded honeycomb fibers with silver coated tips (20 fibers for each laser type). Laser emissions forward and laterally were measured, and digital photographs and thermally sensitive paper used to record the emission profiles. Thermochromic dyes painted onto the root surface of an extracted tooth were used to explore the distribution of laser energy with different tips designs. All three safe tipped ends gave reduced emissions in the forward direction (range 17-59%), but had similar lateral emission characteristics. Fiber designs with reduced forward emission may be useful for various dental laser procedures.

Laser induced explosive vapor and cavitation resulting in effective irrigation of the root canal. Part 1: a visualization study

BACKGROUND AND OBJECTIVES

Limited information exists regarding the induction of explosive vapor and cavitation bubbles in an endodontic rinsing solution. It is also not clear whether a fiber has to be moved in the irrigation solution or can be kept stationary. No information is available on safe power settings for the use of cavitation in the root canal. This study investigates the fluid movements and the mechanism of action caused by an Er,Cr:YSGG laser in a transparent root model.

MATERIAL AND METHODS

Glass models with an artificial root canal (15 mm long, with a 0.06 taper and apical diameter of 400 microm) were used for visualization and registration with a high-speed imaging technique (resolution in the microsecond range) of the creation of explosive vapor bubbles with an Er,Cr:YSGG laser at pulse energies of 75, 125, and 250 mJ at 20 Hz using a 200 microm fiber (Z2 Endolase). Fluid movement was investigated by means of dyes and visualization of the explosive vapor bubbles, and as a function of pulse energy and distance of the fiber tip to the apex.

RESULTS

The recordings in the glass model show the creation of expanding and imploding vapor bubbles with secondary cavitation effects. Dye is flushed out of the canal and replaced by surrounding fluid. It seems not necessary to move the fiber close to the apex.

CONCLUSION

Imaging suggests that the working mechanism of an Er,Cr:YSGG laser in root canal treatment in an irrigation solution can be attributed to cavitation effects inducing high-speed fluid motion into and out the canal.

Impact of Er,Cr:YSGG laser therapy on the cleanliness of the root canal walls of primary teeth

Root canal therapy might be required for primary teeth displaying signs of pulpal inflammation or necrosis. Cleaning and shaping followed by obturation of the canal space with a resorbable paste have been widely performed with remarkable clinical success. However, lengthy endodontic procedures might be contraindicated when treating certain pediatric patients. The aim of this study was to compare the cleanliness of the root canal walls of primary teeth and the time required for the completion of the cleaning and shaping procedures performed by the Er,Cr:YSGG laser, manual or rotary instrumentation techniques. Thirty-five extracted, single-rooted, primary teeth were divided into 4 groups: I, canals were instrumented with Profile .04 rotary instruments to a master apical file size #35; II, the laser was used (parameters: 1.50 W, 20 pps, 30% water and 50% air) with a Z3 laser tip (0.32-mm diameter); III, canals were instrumented with stainless steel K-files; and IV, no instrumentation was performed (control). The teeth were split in 2 halves and prepared for scanning electron microscopy analysis. Images from the coronal, middle, and apical thirds of the roots were analyzed independently by 2 calibrated, blinded evaluators. Statistical analysis revealed significant differences among the groups (Kruskal-Wallis, P = .0001). The techniques were not capable of providing completely clean canals. Treatment with Er,Cr:YSGG laser provided similar cleanliness when compared with rotary instrumentation technique and was superior to manual instrumentation. The laser technique required less time for completion of the cleaning and shaping procedures when compared with both rotary or hand instrumentation.