Bacteria and Hard Tissue Debris Extrusion and Intracanal Bacterial Reduction Promoted by XP-endo Shaper and Reciproc Instruments

Impact of root canal preparation using two single-file systems on the intra-radicular microbiome of teeth with primary apical periodontitis

OBJECTIVES

This study aimed to describe the effects of two single-file systems on the diversity of the endodontic microbiome of teeth with primary asymptomatic apical periodontitis.

MATERIALS AND METHODS

The root canals from single-rooted teeth with apical periodontitis were prepared using either the Reciproc Blue (RB) or the XP-endo Shaper (XPS) instrument system. The latter was followed by a supplementary step with the XP-endo Finisher (XPF) instrument. For irrigation, 5.25% sodium hypochlorite was used. Root canal samples were taken at the baseline (S1), after preparation (S2), and after the supplementary step (S3). DNA was extracted and subjected to high-throughput sequencing using the MiSeq Illumina platform.

RESULTS

Samples from 10 teeth from the RB and 7 from the XPS group were subjected to DNA sequencing. Initial samples differed significantly from post-preparation samples in bacterial diversity, with no significant difference when comparing the two instrument systems. The most dominant phyla in S2 were Bacteroidetes, Proteobacteria, Firmicutes, Fusobacteria, and Actinobacteria. The same phyla were found to dominate baseline samples and samples taken after using XPF, but with differences in the ranking of the most dominant ones. At the genus level, the most dominant genera identified after RB instrumentation were Bacteroidaceae [G-1], Fusobacterium, and Staphylococcus, while the most dominant genera after XPS instrumentation were Fusobacterium and Porphyromonas. These genera were also dominant in the initial samples.

CONCLUSIONS

Both treatment protocols had measurable effects on the root canal microbial diversity, with no significant differences between them. Most of the dominant taxa involved in the primary infection and probably in the aetiology of apical periodontitis were eliminated or substantially reduced.

CLINICAL RELEVANCE

The most dominant taxa that persisted after instrumentation were Fusobacterium, Porphyromonas, Staphylococcus, and Bacteroidaceae [G-1].

Intracanal removal and apical extrusion of filling material after retreatment using rotary or reciprocating instruments: A new approach using human cadavers

AIM

This study compared intracanal removal of filling as well as the frequency and volume of extruded material after retreatment with either HyFlex or Reciproc instruments in mandibular teeth from cadavers.

METHODOLOGY

The root canals of 14 pairs of contralateral single-rooted teeth in mandibles of cadavers were instrumented with Reciproc R40 and filled using lateral compaction. The mandibles were scanned in a micro-computed tomographic (micro-CT) device before and after retreatment procedures. The contralateral teeth were assigned to two groups (n = 14) according to the retreatment protocol using either HyFlex or Reciproc instrument systems. In the HyFlex group, the HyFlex Remover instrument was worked 3 mm short of the working length (WL), followed by HyFlex CM 40.04 and 50.04 at the WL. In the Reciproc group, the R50 instrument was worked up at the coronal two thirds, followed by two more cycles until the WL was reached. Pre- and post-operative micro-CT images were analysed for extrusion and intracanal removal of filling material.

RESULTS

After retreatment, extrusion of filling material occurred in 11 (78%) and 14 (100%) teeth from HyFlex and Reciproc groups respectively (p > .05). A similar volume of extruded material was observed after retreatment with both systems (p > .05). A significant decrease in the intracanal filling volume was verified after retreatment with both tested systems (p < .05). However, residual filling material was found in all root canals, regardless of the system. The amount of filling material removed (HyFlex = 80.8%; Reciproc = 65.9%) and the operation time was similar between systems (p > .05).

CONCLUSIONS

A high frequency of filling material extrusion was observed after retreatment with the two systems in a cadaver model, with no significant difference between them. Both protocols obtained similar efficacy in filling material removal procedures, although none completely cleaned the canals.

Enhancing debris removal in curved canals: a comparative evaluation of XP-endo Finisher and Passive Ultrasonic Irrigation

OBJECTIVES

The study aimed to compare the efficacy of XP-endo Finisher and Passive Ultrasonic Irrigation (PUI) in removing hard tissue debris from curved canals.

MATERIALS AND METHODS

Thirty-four mandibular molars with Vertucci's type II mesial canals were scanned in microcomputed tomography before and after preparation with HyFlex EDM, and accumulated hard tissue debris was quantified. Subsequently, the teeth were randomly divided into two groups according to the supplementary procedure: PUI with the Ultra-X insert or XP-endo Finisher. After the intervention, the specimens underwent another scanning. Two separate analyses were conducted, one for the total canal and another for the isthmus area. Unpaired and paired T-tests were used for inter- and intergroup comparisons, with a significance level set at 5%.

RESULTS

Both supplementary methods reduced the amount of debris compared to the initial volume. Remarkably, the XP-endo Finisher achieved a significantly higher percentage of debris removal (71% for the total canal and 74% for the isthmus areas) compared to PUI (41% for the total canal and 52% for the isthmus area) (P < 0.05).

CONCLUSIONS

Both supplementary approaches reduced the amount of hard tissue debris from canal preparation, still XP-endo Finisher showed a higher reduction compared to PUI (p < 0.05).

CLINICAL RELEVANCE

None of the supplementary methods rendered canals completely free of hard tissue debris. However, the supplementary approach with XP-endo Finisher resulted in lower levels of hard tissue debris than PUI in curved canals with isthmuses.

Centric versus eccentric engine-driven endodontic instrument design for microbial load reduction-A systematic review and meta-analysis of randomised clinical trials

This systematic review assessed the clinical influence of centric and eccentric engine-driven instrument design for reduction in microbial load in infected root canal system. The literature search was conducted in electronic databases (PubMed, Cochrane Library, Scopus, Lilacs and Google Scholar) and grey literature till June 2022. The search strategy followed the PRISMA 2020 guidelines. Qualitative and quantitative synthesis was conducted based on the guidelines of the Cochrane Handbook. The risk of bias was assessed using the revised Cochrane criteria and quality of evidence was conducted using the Grading of Recommendation Assessment, Development and Evaluation tool. Out of 28 papers, only five papers met the inclusion criteria of this review. Studies showed reduction in microbial load after instrumentation using centric or eccentric instruments with no statistically significant difference in the meta-analysis. In conclusion, there is low-grade evidence suggesting that microbial reduction is similar using centric and eccentric instruments.

Disinfection and Shaping of Vertucci Class II Root Canals after Preparation with Two Instrument Systems and Supplementary Ultrasonic Activation of Sodium Hypochlorite

INTRODUCTION

This study compared disinfection and shaping after root canal preparation with either XP-endo Shaper or TruNatomy instrument systems, supplemented by ultrasonic activation of sodium hypochlorite (NaOCl) with either stainless-steel (SS) or nickel-titanium (NiTi) inserts.

METHODS

Mesial roots from mandibular molars with Vertucci class II configuration were divided into 2 groups (n = 24) based on anatomically paired micro-computed tomography (micro-CT) analyses. Pre and postpreparation micro-CT scans were obtained to evaluate the shaping performance. The canals were contaminated with a mixed bacterial culture for 30 days and then subjected to preparation with either XP-endo Shaper or TruNatomy instruments using NaOCl irrigation. Supplementary ultrasonic activation of NaOCl was conducted using either an SS (TruNatomy group) or NiTi (XP-endo Shaper group) insert. Bacteriological samples were taken from the canals before preparation (S1), after preparation (S2), and after the supplementary approach (S3). Bacterial reduction was evaluated using a quantitative real-time polymerase chain reaction.

RESULTS

Preparation with both instrument systems significantly reduced bacterial counts (P < .01). After preparation, 36% (TruNatomy) and 35% (XP-endo Shaper) were negative for bacteria. These values increased to 59% and 65% after ultrasonic activation with the SS and NiTi inserts, respectively. The quantitative data in S2 showed that XP-endo Shaper promoted a significantly higher bacterial reduction than TruNatomy (P < .05). No significant intragroup differences were observed after ultrasonic activation (P > .05), probably because the SS insert promoted a significantly higher S2-to-S3 reduction than the NiTi insert (P < .01). Micro-CT analysis revealed no significant differences in the unprepared areas between the groups (P > .05).

CONCLUSIONS

The XP-endo Shaper caused a significantly higher bacterial reduction than TruNatomy in Vertucci class II canals. Better antibacterial results after ultrasonic activation were observed for the SS ultrasonic inserts than for the NiTi inserts.

Apical Extrusion: Is It an Inherent Occurrence During Every Endodontic Treatment?

The aim of this literature review was to analyze all available scientific data on apical extrusion and to identify and associate the possible factors influencing the occurrence of apical extrusion, ranging from the choice of the canal shaping system, the irrigation technique, to the choice of diameter and the apical limit of preparation. A bibliographic search for relevant articles on apical extrusion of debris, irrigants, and bacteria was performed using the following databases: PubMed, Cochrane Library, and ScienceDirect. This search identified articles published between 2010 and 2023 in two languages (French and English). After selective sorting, 25 relevant documents were included. All the studies retained clearly agree on the inherent nature of apical extrusion during endodontic treatment. At the same time, we also understand that the amount of extrusion can be influenced by a number of parameters throughout endodontic therapy. According to this review, despite the undeniable nature of apical extrusion during endodontic therapy, studies with relatable experimental models that approach in vivo conditions are required to establish exploitable conclusions regarding apical extrusion and its prevention.

Cleaning and Disinfecting Oval-Shaped Root Canals: Ex Vivo Evaluation of Three Rotary Instrumentation Systems with Passive Ultrasonic Irrigation

Background and Objectives: Successful root canal treatment depends on the thorough removal of biofilms through chemomechanical preparation. This study aimed to investigate and compare the cleaning and disinfecting efficiency of oval-shaped root canals using XP-endo Shaper (XPS), ProTaper Next (PTN), and HyFlex CM (HCM) in combination with passive ultrasonic irrigation (PUI). Materials and Methods: Ninety extracted teeth were contaminated and randomly divided into three groups: XPS, PTN, and HCM. Each group was assigned to three subgroups: subgroup A (sterile saline), subgroup B (3% sodium hypochlorite and 17% ethylenediaminetetraacetic acid), and subgroup C (3% sodium hypochlorite, 17% ethylenediaminetetraacetic acid, and PUI). Bacterial sampling was conducted both from baseline samples and samples after chemomechanical preparation. Scanning electron microscopy (SEM) was used to evaluate the residue bacterial biofilms, hard tissue debris, and smear layers on the buccolingual walls of oval-shaped root canals. Results: When combined with sterile saline, XPS demonstrated a higher reduction of bacterial counts and was more effective in eradicating Enterococcus faecalis in the middle third of the canals compared to the other instruments (p < 0.05). Additionally, when used with antimicrobial irrigants, XPS was more effective in disinfecting the coronal third of the canals than the other instruments (p < 0.05). Furthermore, XPS reduced hard tissue debris more effectively in the middle third of canals than in the apical third (p < 0.05). Conclusions: XPS outperforms PTN and HCM in disinfecting oval-shaped root canals. Despite the fact that combining XPS and PUI improves cleaning and disinfecting, removing hard tissue debris from the critical apical area remains challenging.

Incidence of Post-Operative Pain following a Single-Visit Pulpectomy in Primary Molars Employing Adaptive, Rotary, and Manual Instrumentation: A Randomized Clinical Trial

Background and Objectives. To differentiate the intensity of postoperative pain after primary molar pulpectomy employing manual instrumentation versus two single-file systems with different kinetics (the XP-Endo shaper file with adaptive instrumentation vs. the Kedo-SG blue file with continuous rotation instrumentation). Materials and Methods. This three-arm, single-blind, randomized clinical trial included assessing 75 healthy children between 4 to 9 years who required pulpectomy for primary molars (mandibular first and second). The three groups each had an equal number of children. Children in Group 1 had their teeth instrumented with the XP-endo Shaper, children in Group 2 had their teeth instrumented with the Kedo-SG Blue file, and children in Group 3 had their teeth instrumented manually using K-files. The degree of postoperative pain was measured using a four-point pain scale at 6-, 12-, 24-, 48-, and 72-h following therapy. Each participant's parent received five flashcards with four faces and a word characterizing each face. The data were analyzed using Kruskal-Wallis and chi-square tests. The level of significance was set to 5%. Results. During the follow-up period, there was a significant difference in postoperative pain intensity between the three groups. The XP-endo shaper was associated with considerably decreased post operative at the 6- and 12-h interval followed by Kedo-SG. The highest post-operative discomfort across the groups was related to the patients who underwent manual instrumentation. Conclusion. In comparison to rotary and manual instrumentation, postoperative pain severity was reduced with adaptive instrumentation.

Comparison of Postoperative Pain After the Utilization of Different File Systems in Single Visit Endodontics

Purpose

This prospective single-blind, parallel-group, randomized clinical trial was aimed to compare the effect of three different rotary instrumentation systems ProTaper Next (PTN), Self-Adjusting File (SAF) and XP-endo Shaper (XPS) on postoperative pain and analgesic intakes.

Patients and Methods

A total of 159 molars diagnosed with symptomatic irreversible pulpitis were randomly divided into three study groups according to the instrumentation techniques: PTN (n = 54), SAF (n = 52), and XPS (n = 53). The preoperative pain scores were taken before the onset of treatment in the groups. After a single appointment for root canal treatment, the patients were asked to rate the level of their pain according to the Visual Analog Scale (VAS) of 100 mm at 6, 24, 48, and 72-hour post-treatment intervals. Ibuprofen was prescribed to be taken while experiencing pain; patients were requested to note the number of pills consumed at intervals after treatment.

Results

The patients in SAF and XPS groups had lower mean VAS scores than the PTN group at 24-, 48-, and 72-hour intervals (p < 0.05). The most common analgesic intake was optimally seen in the PTN group at a 6-hour interval. All shaping procedures caused postoperative pain, whose intensity decreased with time.

Conclusion

The SAF and XPS groups had a lesser intensity of pain as well as minimum analgesic intakes as compared to the PTN group. All instrumentation systems moderately caused pain, and the PTN group experienced the highest pain among others.

Biofilm elimination from infected root canals using four different single files

INTRODUCTION

Enterococcus faecalis (E. faecalis) is the most commonly isolated bacterium from infected root canals. It is found in the form of a biofilm, which makes it more resistant to antimicrobials, and requires optimal chemomechanical strategies to maximize root canal disinfection.

AIM

To evaluate the efficacy of 4 different endodontic file systems against E. faecalis biofilm growth in root canals using colony-forming units per milliliter (CFU/mL) and scanning electron microscope (SEM).

METHODS

Eighty-five extracted human mandibular premolars with straight root canals and apical diameters not larger than the #15 K-file were randomly selected. After performing a pilot study (n = 15) to determine the ideal incubation period for E. faecalis biofilm development, sixty-five root canals were infected with E. faecalis, incubated for 3 weeks, and then mechanically prepared using one of four single files (XP-endo Shaper, Hyflex EDM, One Curve, and Fanta. AFTM F One) (n = 15). Five infected root canals were excluded for the positive control. Five non-contaminated root canals were included for the negative control. Samples were collected using sterile paper points pre- and post-instrumentation to determine the bacterial load (CFU/mL). Root canals from each group were topographically evaluated at the coronal, middle, and apical segments using scanning electron microscope (SEM). Bacterial reduction data were estimated and statistically analyzed by Kruskal-Wallis and Mann-Whitney U tests (post hoc test) (P ≤ .05).

RESULTS

XP-endo Shaper, Hyflex DEM, and One Curve significantly could eradicate E. faecalis biofilms in infected root canals with no significant difference among them compared to Fanta. AF™ F One.

CONCLUSION

None of the systems were capable of completely eliminating biofilms. XP-endo Shaper, Hyflex EDM, and One Curve mechanically eliminated E. faecalis biofilms compared to Fanta. AF™ F One from infected root canals.

Comparison of five single-file systems in the preparation of severely curved root canals: an ex vivo study

BACKGROUND

The ex vivo study is to compare the root canal preparation outcomes achieved by five nickel-titanium single-file instrumentation systems (M3-L, Reciproc Blue, V-Taper 2H, WaveOne Gold, XP-endo Shaper) in severely curved molar root canals.

METHODS

A total of 60 root canals were selected from extracted human molar teeth with curvatures ranging from 25° to 50° and divided into five groups based on the instrumentation system employed (n = 12). Before and after root canal preparation, a Micro-CT scan was taken, and pre- and post-operative data were analyzed to evaluate the following parameters: volume increment of root canals (VI), untouched root canal areas (UTA), and canal transportation (CT). Apically extruded debris (AD) was collected during preparation. After that, all samples were separated into two parts and examined respectively by scanning electron microscope (SEM) to assess cleaning ability. Data were statistically analyzed with ANOVA (UTA, AD, VI) or Kruskal-Wallis test (CT, SEM-score), the level of significance was set at α = 0.05.

RESULTS

There were no significant differences between the five systems regarding the AD, VI, and UTA parameters (P > 0.05). In terms of CT, no significant difference was noted at the straight section of canal and apical levels, while XP-endo Shaper showed less canal transportation than M3-L at the level of curved vertex (P < 0.05), and the centering ability of V-Taper 2H was significantly better than WaveOne Gold at the initial point of bending (P < 0.05). Debris and smear layers were present on the canal walls of all specimens, the apical thirds of the canal presented higher SEM scores than the coronal thirds in all groups (P < 0.05). Reciproc Blue and XP-endo Shaper showed fewer smear scores than WaveOne Gold in the apical thirds (P < 0.01 and P < 0.05, respectively), and no statistical difference was found between other groups in the middle and coronal thirds.

CONCLUSION

The five single-file systems evaluated performed equally in apically debris extrusion, dentin removal, and untouched root canal areas, while XP-endo Shaper and V-Taper 2H resulted in less canal transportation compared to M3-L and WaveOne Gold. Regarding cleaning ability, Reciproc Blue and XP-endo Shaper were associated with less smear layer than WaveOne Gold in the apical thirds.

Cavernous sinus thrombosis followed by brain ischaemia in a type-1 diabetic patient: a persistent endodontic infection report

Central nervous system infections and cavernous sinus thrombosis are associated with high mortality rates and may be a consequence of oral infection propagation. A 24-year-old woman has attended a private dental office with a pain complaint in the upper right central incisor and had the endodontic treatment completed. However, the patient returned to the dental office reporting pain in the same tooth and the presence of swelling. Then, the root canal was retreated. After one week, the patient presented to a Basic Health Unit with a history of vomiting and convulsion crisis followed by loss of consciousness. A computed tomography exam showed cavernous sinus thrombosis and brain ischaemic areas. The present report describes a rare case of cavernous sinus thrombosis followed by brain ischaemia in a type-1 diabetic patient, associated with persistent endodontic infection, with subsequent patient's death.

Influence of Apical Diameter on Filling Material Extrusion during Retreatment - A Micro-CT and CBCT evaluation

AIM

To investigate whether foraminal widening performed at primary treatment has an effect on the amount of apically extruded obturator material during retreatment and to evaluate the sensitivity of cone beam computed tomography (CBCT) in detecting extruded obturator material.

METHODS

Forty palatal roots of maxillary molars were selected based on micro-CT and divided into two groups (n=20): with foraminal widening (WE) and without foraminal widening (NE). To standardize the apical foramen, all specimens were instrumented to the foramen using the Protaper Next system, up to instrument X3. The WE group was instrumented to the foramen up to instrument X5, and the NE group was instrumented 1 mm lower. The canals were obturated 1 mm below the apical foramen with gutta-percha and AH Plus and stored for 7 days at 37 °C and 95% humidity. Roots were fixed in microtubes filled with 1.5% agar gel. The obturation material was removed with Reciproc R50. Scans of the teeth and agar were performed using micro-CT and CBCT. Comparison between groups and between methods was performed using Mann-Withney test (p ≤0.05).

RESULTS

No statistical difference was found when comparing the extruded material between groups using micro-CT (p = 0.589) or CBCT (p = 0.953). CBCT measured a greater volume of extruded material than micro- CT (p = 0.0004).

CONCLUSION

Foraminal widening had no effect on the extrusion of filling material during retreatment. The CBCT favored the evaluation of apically extruded filling material.

Impact of agitation/activation strategies on the antibiofilm potential of sodium hypochlorite/etidronate mixture in vitro

Background

To investigate the effect of a rotary agitation method or ultrasonically activated irrigation on the antibiofilm effect of a mixture of sodium hypochlorite (NaOCl) and etidronate (1-hydroxyethylidene-1,1-bisphosphonate, HEBP) using a dual-species biofilm model in root canal system.

Methods

Mature dual-species biofilms of Enterococcus faecalis and Streptococcus gordonii were formed in root canals of mandibular premolars. Teeth were randomly allotted (n = 12) to group 1, XP-endo Finisher (XPF); group 2, ultrasonically activated irrigation (UAI); group 3, syringe-and-needle irrigation (SNI). In all groups, canals were instrumented with a rotary instrument (XP-endo Shaper) prior to irrigant agitation/activation. A mixture containing 2.5% NaOCl and 9% HEBP was used throughout the experiment. Bacterial counts from the canal were determined using qPCR before preparation (S1), after preparation (S2), and after final irrigation agitation/activation (S3). Bacterial viability within the dentinal tubules in the coronal, middle and apical root-thirds was quantified using confocal microscopy after Live/Dead staining. The bacterial counts and viability were compared between groups using one-way ANOVA and post-hoc Tukey’s tests. Paired t-test was used to compare the bacterial counts within groups.

Results

Instrumentation alone could significantly reduce the microbial counts in all the groups (P < 0.0001). Subsequent agitation/activation resulted in significant microbial reduction only in XPF and UAI (P < 0.05), both of which reduced significantly more microbial counts than SNI (P < 0.05). Live/Dead staining revealed that XPF and UAI showed significantly greater percentage of dead bacteria within the dentinal tubules than SNI in the coronal third (P < 0.05); UAI resulted in the significantly highest percentage of dead bacteria in the middle third (P < 0.05); while there was no significant difference between the groups in the apical third (P > 0.05).

Conclusions

When using the sodium hypochlorite/etidronate mixture for irrigation, final irrigant agitation/activation with XP-endo Finisher or ultrasonic can improve disinfection of the main root canal space and the dentinal tubules in the coronal third, while ultrasonically activated irrigation appears to exhibit better disinfection within dentinal tubules in the middle third.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12903-022-02222-1.

Effect of mode of rotation on apical extrusion of debris with four different single-file endodontic instrumentation systems: Systematic review and meta-analysis

This systematic review and meta-analysis evaluated whether single-file endodontic instrumentation systems with the reciprocating type of motion are responsible for more debris extrusion than single-file endodontic instrumentation systems with the full rotational type of motion. Electronic and manual searches were performed following the recommendations of Preferred Reporting Items for Systematic Reviews and Meta-Analysis - PRISMA. We included studies comparing rotary (Neoniti and/ OneShape) versus reciprocating (WaveOne and/ Reciproc) systems. We evaluated the quality of studies and performed statistical analysis using R-Project software. Eight studies of high quality were included to perform the meta-analysis. Subgroup analysis was also done. The overall risk of bias was too low. In conclusion, single-file reciprocating systems tend to generate more extrusion of debris than single-file rotary systems.

Micro-CT evaluation of root canal preparation with rotary instrumentation on prototyped primary incisors

This study aimed to evaluate the endodontic instrumentation outcomes with asymmetrical files compared to reciprocating and hand files (HFs) in 3D-printed prototypes of upper primary incisors using micro-computed tomography (micro-CT). For this purpose, 50 prototypes were randomly divided (n = 10) according to the instrumentation technique as follows: HFs, a reciprocating file (WaveOne® Gold [WOG]), and three asymmetrical movement files: XP-Endo® Shaper (XPS), XP-Endo® Finisher (XPF), and XP Clean (XPC). The specimens were scanned and, after registration of the baseline and instrumented volumes, changes in the root canal volume (RCV), debris accumulation, removed root material volume (RRMV), non-instrumented areas, and the presence of cracks/perforations were quantified. Data were analyzed by analysis of variance and Student's t-test, while the effect size was calculated for statistically significant outcomes. All groups showed an increase in RCV after instrumentation (p < 0.05), but this was higher with HFs (p < 0.05). Accumulated debris was higher for WOG and XPS (p < 0.05), but WOG exhibited more in the medium and apical third areas. HFs showed the highest RRMV (p < 0.05), especially at the apical third. The non-instrumented areas were lower for HFs and XPC than for the other systems (p < 0.05). Cracks were present in a few WOG (n = 2) and HF specimens (n = 3) and in this group, one of the cracked specimens and two others showed perforations. The asymmetric systems resulted in conservative dentin removal and fewer cracks/perforations as compared to HFs and a reciprocation file in prototyped primary upper incisors. XPC showed the best compromise between RRMV and non-instrumented areas with a low accumulation of debris.

Effect of passive ultrasonic irrigation on hard tissue debris removal: a systematic review and meta-analysis

Accumulated hard tissue debris (AHTD) in root canal irregularities may negatively impact adequate root canal disinfection. In light of this, the efficacy of passive ultrasonic irrigation (PUI) to reduce AHTD has been largely studied in in vitro studies, which have adopted different analytic methods of varying accuracy to determine the extent of AHTD more correctly. Therefore, the aim of this study was to compare how well PUI and non-activated irrigation (NAI) systems perform in reducing AHTD during final irrigation protocols, based exclusively on studies whose analyses used microCT scanning. A systematic search of the studies published up to April 2020 was performed using MeSH terms and free terms, in the following databases: PubMed, Scopus, Web of Science, BVS (Lilacs and BBO) and Embase. The inclusion criteria consisted of laboratory studies that evaluated the amount of AHTD, and compared PUI with NAI protocols using microCT analysis. The risk of bias in the selected studies was assessed critically by two reviewers. A meta-analysis was performed using the RevMan software program (P<0.05), and included studies providing the standardized mean difference (SMD), using a fixed effect model, and adopting a confidence interval of 95%. In all, 3495 studies were identified, three of which met the inclusion criteria. All three were considered as having a low risk of bias. The meta-analysis comparing the ability of PUI and NAI protocols to remove hard tissue debris showed a higher percentage of AHTD reduction (P<0.01) for PUI, with a confidence interval of 1.41 [0.79, 2.02]. The heterogeneity among the studies was 82% (I2). Considering the limitations of the present study, this systematic review and meta-analysis showed that PUI was more effective than NAI in removing hard tissue debris, based exclusively on studies that used microCT scanning to provide a more precise analysis of the two techniques used. The findings presented in the present study reinforce the concept that PUI can increase residue removal and improve the cleanliness of the root canal in endodontic treatments.

Influence of pecking frequency at working length on the volume of apically extruded debris: A micro-computed tomography analysis

Background/purpose

There is no consensus to date on how many repetitive pecking motions at working length (WL) should be regarded as optimal during instrumentation. Therefore, this study aimed to evaluate the effect of pecking frequency at WL on the volume of apically extruded debris using three single-file systems in curved, oval-shaped canals.

Materials and methods

Forty-five single-rooted mandibular premolars with curved, oval-shaped canals were prescanned by micro-computed tomography, anatomically paired-matched, and randomly divided among three groups (n = 15 each): Reciproc Blue (RB), WaveOne Gold (WOG) and XP-endo Shaper (XPS). Samples were embedded in agarose gel to collect extruded debris. After preparation to the WL, each sample was rescanned after one, two, four, 10, and 20 pecking motions at WL, respectively. The debris volume was innovatively calculated by a modification of an existing method using micro-computed tomography. The apical preparation size was also measured. Data were compared using a two-way repeated-measures analysis of variance.

Results

All single-file systems extruded debris apically, irrespective of the pecking frequency at WL. The extruded debris volume correlated positively with the minor foramen size (P < 0.05); both increased with pecking frequency for each single-file system (P < 0.05). The minor foramen size corresponded to the instrument tip size when reaching the WL once.

Conclusion

To produce less debris extrusion and obtain a predictable foramen size corresponding to the instrument tip size, a single pecking motion may be preferred when using single-file systems. Caution should be exercised when applying the current results to clinical situations.

Qualitative Assessment of the Surface Topographic Changes of XP-endo Shaper and TruNatomy files after exposure to Sodium Hypochlorite and Ethylenediaminetetraacetic Acid

OBJECTIVE

TruNatomy and XP-endo Shaper are recently introduced file systems showing increased fatigue resistance rate. The present study aims to evaluate the surface topographic changes and nickel (Ni) and titanium (Ti) elemental loss of XP-endo Shaper (XPS) and TruNatomy (TN) files on exposure to conventionally used root canal irrigants; [5.25% sodium hypochlorite (NaOCl) and 17% ethylenediaminetetraacetic acid (EDTA)] at a 10 minute time frame using atomic force microscopy (AFM) and energy dispersion X-ray spectroscopy (EDX) analytical techniques.

METHODS

Twelve samples for each of XPS (30/.04 taper) and TN (26/.04 taper; prime) instruments were dynamically exposed to 5.25% NaOCl, 17% EDTA separately for 10 minutes and in combination of 5.25% NaOCl (8 minutes)+17% EDTA (2 minutes) for a total of 10 minutes. Post exposure, the files were subjugated to AFM and EDX analysis. Independent t test and one-way ANOVA were used for statistical analysis, and the level of significance was set at 0.05.

RESULTS

XPS and TN showed a significant increase of surface roughness (Ra) and roughness mean square (RMS) on exposure to various irrigants (P<0.05) using AFM analysis. Increased overall roughness was observed with TN in comparison to XPS (P<0.05). Elements Ni and Ti loss was found in both XPS and TN files using EDX analysis. Both files exhibited Ni and Ti loss with the loss of Ni content higher for TN after exposure to 17% EDTA. Loss of Ti was seen for both files on exposure to a combination of 5.25% NaOCl+17% EDTA.

CONCLUSION

After exposure to root canal irrigants, the surface roughness was lesser in XPS compared to TN files. 17% EDTA caused significantly higher surface roughness in both file systems when compared to 5.25% NaOCl. TN exhibited overall higher elemental (Ni and Ti) loss on exposure to 17% EDTA and 5.25% NaOCl+17% EDTA in comparison to XPS files.

Comparison of Apical Extrusion of Bacteria After Glide Path Preparation Between Manual K File, One G Rotary, and WaveOne Gold Glider Reciprocation Preparations

Objective:

To compare the amount of apically extruded bacteria between hand-filed preparations, rotary and reciprocation glide path preparations in curved canals of extracted teeth infected with Enterococcus faecalis.

Methods:

Forty mandibular first molar teeth were decoronated, fitted into rubber stoppers and fixed onto glass vials. The mesiobuccal canals from mandibular first molar teeth were infected with Enterococcus faecalis, then randomly assigned to one of five groups for glide path preparation: manual stainless-steel file (K-files), rotary file (One G), reciprocating file (WaveOne Gold Glider) and two control groups. After glide path preparation, 0.01 mL of saline was taken from the experimental vials. The solution was plated on tryptic soy agar and colonies of bacteria were counted as colony-forming units. The results were analysed statistically using Kruskal-Wallis and post hoc Mann-Whitney U tests.

Results:

The manual K-file group was associated with significantly more bacteria extrusion compared to the rotary and reciprocating groups (P<0.05). However, no significant difference occurred between rotary and reciprocation instruments.

Conclusion:

All instrumentation techniques resulted in a measurable amount of apical extrusion of bacteria. Manual K-files extruded the highest quantity of bacteria compared to One G rotary file and WaveOne Gold Glider reciprocation file during glide path preparation.

Influence of reciprocating and rotary instrumentation on microbial reduction: a systematic review and meta-analysis of in vitro studies

Objectives

The purpose of this study was to conduct a systematic review and meta-analysis of in vitro studies regarding the effectiveness of reciprocating and rotary instrumentation on microbial reduction in root canals.

Materials and Methods

PubMed, Scopus, Web of Science, the Cochrane Library, and the gray literature were searched through December 2019. Studies comparing the influence of reciprocating and rotary instrumentation on the removal of microorganisms from root canals that quantified the antimicrobial effect were included. Data extraction was completed using a systematic form for data collection. The risk of bias of the studies was evaluated. Standardized mean differences (SMDs) and confidence intervals (CIs) were calculated using a random effects meta-analysis.

Results

Seventeen in vitro studies were included in this systematic review, of which 7 provided adequate data for inclusion in the meta-analysis. Both reciprocating and rotary systems were similarly effective in reducing the microbial load in infected root canals (SMD [95% CI], 0.0481 [-0.271, 0.367]). Three studies showed a low risk of bias, whereas most of the studies (82%) presented a medium risk.

Conclusions

Although both techniques decrease the microbial content (with reductions of 23.32%-88.47% and 23.33%-89.86% for reciprocating and rotary instrumentation, respectively), they are not able to provide complete disinfection of root canals.

Influence of ultraconservative access cavities on instrumentation efficacy with XP-endo Shaper and Reciproc, filling ability and load capacity of mandibular molars subjected to thermomechanical cycling

AIM

To evaluate the influence of ultraconservative access cavities (UltraAC) on canal shaping and filling ability and load capacity of mandibular molars after root canal preparation with XP-endo Shaper (XP) or Reciproc (RC), under simulated clinical conditions. Traditional access cavities (TradAC) were used for comparison.

METHODOLOGY

Forty extracted mandibular molars were scanned by micro-computed tomographic and, based on similar anatomical features, were divided into four groups (n = 10), according to the type of access cavity and canal instrumentation protocol: TradAC/RC, TradAC/XP, UltraAC/RC and UltraAC/XP. All root canal procedures were performed with the teeth placed in a dental mannequin. Teeth were scanned after root canal instrumentation and filling. Unprepared canal area, dentine removed, accumulated hard tissue debris (AHTD), canal transportation, presence of voids and filling material remnants within the pulp chamber were analysed. After restorative procedures, the teeth were subjected to thermomechanical cycling and to a load capacity test. Statistical analyses were performed using two-way anova test, considering the randomized blocks design (P < 0.05).

RESULTS

The percentage of unprepared canal area was significantly lower in TradAC groups when compared to UltraAC groups (P < 0.05), regardless of the instrument used. The UltraAC/XP group had significantly lower percentage of root dentine removed when compared to other groups (P < 0.05). UltraAC/XP and TradAC/XP groups had significantly lower percentages of AHTD than UltraAC/RC and TradAC/RC groups (P < 0.05). Regarding canal transportation, in the MB root canals, the TradAC/XP group had significantly lower values than other groups (P < 0.05). In general, in ML and distal root canals, TradAC/XP and UltraAC/XP groups had significantly lower values of canal transportation when compared to other groups (P < 0.05). Moreover, the UltraAC/RC had the greatest canal transportation values in MB and distal canals. The UltraAC groups had significantly greater percentages of voids and volume of remaining root filling material within the pulp chamber after cleaning procedures than TradAC groups (P < 0.05). There was no difference in the load capacity amongst groups (P < 0.05).

CONCLUSION

The UltraAC/XP and UltraAC/RC groups had significantly greater areas of unprepared canal walls, significantly more voids and volume of root filling material remnants within the pulp chamber after canal filling. UltraAC/XP was associated with significantly less root dentine removal and significantly more AHTD whilst TradAC/XP had overall significantly less canal transportation. No differences were observed in the load capacity amongst groups.

Debris Extrusion Using Reciproc Blue and XP Endo Shaper Systems in Root Canal Retreatment

This study aimed at assessing the performance of Reciproc Blue (RB) and XP Endo Shaper (XPS), used for canal retreatment on extracted teeth, in terms of debris extrusion and obturating materials removal. Thirty mandibular premolars were prepared to ProTaper X2 file, obturated using warm vertical compaction, and then incubated for 28 days at 100% humidity at 37°C. Teeth were randomly assigned into two groups, according to the system used for retreatment (RB and XPS). During retreatment, debris extruded beyond the apex was collected in preweighed Eppendorf tubes, and the retreatment time was measured. Afterward, the teeth were longitudinally sectioned to assess the remaining obturating materials. Data were statistically analyzed using the Mann-Whitney test and chi-square test at a 95% confidence level. All the samples had extruded debris at varying weights ranging from 0.125 mg to 3.680 mg. XPS extruded less debris than RB, but no difference was detected (Mann-Whitney test; P > 0.05). RB and XPS required 54.9 ± 17.9 and 22.3 ± 9.3 seconds to perform retreatment procedures, respectively (Mann-Whitney test; P < 0.05). The sealer was found in all the samples. Compared to the RB group, fewer samples with remaining gutta-percha were found in the XPS group (Chi-square test; P < 0.05). None of the files fractured during the retreatment procedure. The tested files appear to extrude debris beyond the apex. Although XPS was able to remove the gutta-percha completely from the majority of the canals, it was unable to remove the sealer.

Effect of XP-endo Shaper versus conventional rotary files on postoperative pain and bacterial reduction in oval canals with necrotic pulps: a randomized clinical study

AIM

To assess postoperative pain and bacterial reduction following the use of XP-endo Shaper versus conventional rotary files in preparation of oval canals with necrotic pulps.

METHODOLOGY

This superiority, parallel, randomized, double blinded clinical trial was conducted in the clinic of the Endodontic Department, Faculty of Dentistry, Cairo University, Egypt. Sixty single-canalled mandibular premolars with necrotic pulps were randomly assigned into two equal groups. Canals were instrumented using XP-endo Shaper files in the intervention group and iRaCe rotary files in the control group. Bacterial samples were taken before and after canal instrumentation. Incidence and severity of postoperative pain was assessed using a modified VAS after 6, 12, 24 h and daily for 5 days. A culture method was used to assess the number of bacterial colony forming units. Incidence of analgesic intake as well as flare-ups was recorded. Data were analysed using chi-square, Fisher Exact, Mann-Whitney, Independent t-test, and Spearman's correlation for pain and bacterial counts.

RESULTS

The XP-endo Shaper compared with the iRaCe group was associated with a significantly lower incidence of postoperative pain at 6, 12, and 24 h (P = 0.039, 0.047, and 0.026, respectively), and severity of postoperative pain at 6 h (mean difference: 1.33, 95% CI: 0.307-2.352, P = 0.02), 12 h (mean difference: 1.1, 95% CI: 0.26-1.936, P = 0.007), 24 h (mean difference: 0.94, 95% CI: 0.178-1.701, P = 0.008) and 48 h (mean difference: 0.97, 95% CI: 0.192-1.747, P = 0.038). There was a significant decrease in bacterial count following canal instrumentation in both groups (P < 0.001) with no significant difference between them (mean difference: 0.83 × 10⁵ , 95% CI: 0.336 × 10⁵ -1.996 × 10⁵ , P = 0.56). A weak correlation existed between postoperative pain severity and bacterial counts (P = 0.54). There was no significant difference in analgesic intake between the two groups (P = 0.085). Flare-ups occurred in 3.3% of teeth in the iRaCe group, while no flare-ups occurred in the XP-endo Shaper group.

CONCLUSIONS

XP-endo Shaper was associated with a significantly lower frequency of postoperative pain for up to 24 h, and lower severity of postoperative pain for up to 48 h compared with iRaCe files. Both systems were equally effective in bacterial reduction from oval root canals with necrotic pulps.

Shaping ability and apical debris extrusion after root canal preparation with rotary or reciprocating instruments: a micro-CT study

Objectives

The aim of this study was to evaluate the shaping ability of the TruShape and Reciproc Blue systems and the apical extrusion of debris after root canal instrumentation. The ProTaper Universal system was used as a reference for comparison.

Materials and Methods

Thirty-three mandibular premolars with a single canal were scanned using micro-computed tomography and were matched into 3 groups (n = 11) according to the instrumentation system: TruShape, Reciproc Blue and ProTaper Universal. The teeth were accessed and mounted in an apparatus with agarose gel, which simulated apical resistance provided by the periapical tissue and enabled the collection of apically extruded debris. During root canal preparation, 2.5% sodium hypochlorite was used as an irrigant. The samples were scanned again after instrumentation. The percentage of unprepared area, removed dentin, and volume of apically extruded debris were analyzed. The data were analyzed using 1-way analysis of variance and the Tukey test for multiple comparisons at a 5% significance level.

Results

No significant differences in the percentage of unprepared area were observed among the systems (p > 0.05). ProTaper Universal presented a higher percentage of dentin removal than the TruShape and Reciproc Blue systems (p < 0.05). The systems produced similar volumes of apically extruded debris (p > 0.05).

Conclusions

All systems caused apically extruded debris, without any significant differences among them. TruShape, Reciproc Blue, and ProTaper Universal presented similar percentages of unprepared area after root canal instrumentation; however, ProTaper Universal was associated with higher dentin removal than the other systems.

Shaping ability of two root canal instrumentation systems in oval-shaped canals: A microcomputed tomography study

The objective was to evaluate the shaping ability of XP-endo Shaper and Mtwo systems in oval-shaped canals preparation by microcomputed tomography (micro-CT) along the entire canal. The volume, surface area and percentage of unprepared area were evaluated by image processing in entire canal and apical third (5 mm). Apical transportation and centring ability were evaluated at 3, 5 and 7 mm from the apex. Forty single-canal oval canines were paired in two groups (n = 20) according to the instrumentation system: XP-endo Shaper and Mtwo. The teeth were scanned by micro-CT before and after instrumentation, using a thermal vat at 37°C. The XP-endo Shaper system was more effective in the instrumentation of oval-shaped canals when compared to Mtwo system, resulting in greater volume increases and lower percentage of unprepared canals walls in apical region. Regarding apical transportation and centring ability, no statistical difference was observed.

Can kinematics, file diameter, and PUI influence the intracanal decontamination and apical bacterial extrusion?

The present study investigated the intracanal decontamination and apical extrusion of bacteria and debris from root canals instrumented with rotary and reciprocating systems (ProDesign Logic or ProDesign R), with different file diameters and using conventional syringe irrigation (CSI) or passive ultrasonic irrigation (PUI). Eighty extracted mandibular premolars were contaminated with Enterococcus faecalis and randomly assigned to eight experimental groups according to the root canal instrumentation and irrigation technique employed (n = 10): G1: Prodesign Logic 25.06; G2: Prodesign R 25.06; G3 and G4 were instrumented with the same single-file systems, respectively, using 35.05 diameters and CSI. G5, G6, G7, and G8 were instrumented like the previous groups, but with PUI. Apically extruded debris during instrumentation was collected into pre-weighed microtubes. The weight of the empty microtube was subtracted from the final weight to establish the amount of extruded debris. Bacteria from root canals and extruded debris were collected for a microbiological evaluation of colony forming units (CFU/mL). For statistical analyses, the Mann-Whitney and Kruskal-Wallis followed by the Dunn's tests were used (α = 0.05). All instruments caused extrusion of debris. For irrigation techniques, PUI promoted greater debris and bacterial extrusion (p < 0.05). The CFU/mL count indicated that the instrumentation of the experimental groups were equally effective in the decontamination of the root canal (p > 0.05). The systems tested (regarding file diameter and kinematics) were associated with similar amounts of apically extruded debris and root canal decontamination. PUI was associated with greater debris and bacterial extrusion.

Disinfecting and Shaping Type I C-shaped Root Canals: A Correlative Micro-computed Tomographic and Molecular Microbiology Study

INTRODUCTION

This ex vivo study compared the disinfection and shaping abilities of 2 preparation protocols in C-shaped canals.

METHODS

Mandibular second molars with type I C-shaped canals were pair matched based on micro-computed tomographic (micro-CT) analysis and distributed into 2 groups. The canals were contaminated with a mixed bacterial culture and prepared using 2 protocols, both with 2.5% sodium hypochlorite irrigation: XP-endo Shaper (FKG Dentaire, La Chaux-de-Fonds, Switzerland) supplemented with XP-endo Finisher (FKG Dentaire) (XP-E) and BioRaCe (FKG Dentaire) supplemented with a Hedström file (Dentsply/Sirona, Tulsa, OK) (BR-Hed). Micro-CT scans and intracanal bacteriologic samples were taken before (scan #1 and sample 1) and after preparation (scan #2 and sample 2) and after the supplementary step (scan #3 and sample 3). Canal shaping was evaluated by micro-CT imaging, and disinfection was assessed by quantitative polymerase chain reaction.

RESULTS

Micro-CT data from the XP-E (n = 21) and BR-Hed (n = 23) protocols revealed no significant differences between groups regarding shaping parameters (canal volume, surface area, structure model index, and prepared walls) after preparation and after the supplementary step (P > .05). All these parameters significantly increased after each preparation step (P < .05), except for structure model index changes after the XP-endo Finisher (P > .05). Bacteriologic data from the XP-E (n = 21) and BR-Hed (n = 22) groups showed that 14 (66.7%) and 10 (45.5%) S2 samples still had detectable bacteria, respectively. The corresponding figures for supplementary steps with the XP-endo Finisher and Hedström file were 11 (52.4%) and 10 (45.5%), respectively. Bacterial counts in sample 1 significantly decreased in samples 2 and 3 in both groups (P < .01). Intragroup comparison between sample 2 and sample 3 showed a 66% reduction in counts after using the Hedström file and 18% after using the XP-endo Finisher (P > .05 for both groups). The quantitative bacterial reduction was not different between groups (P > .05).

CONCLUSIONS

The XP-endo Shaper and BioRaCe systems have similar disinfecting and shaping abilities in C-shaped canals. Supplementary steps with the Hedström file and the XP-endo Finisher were similarly effective in improving shaping, but this was not sufficient to enhance disinfection. About half of the cases, in both groups, still harbored detectable amounts of bacteria.

Debris extrusion during root canal preparation with nickel-titanium instruments using liquid and gel formulations of sodium hypochlorite in vitro

This study compared the amount of apically extruded debris during root canal preparation with three single-file systems using liquid and gel-based formulations of sodium hypochlorite (NaOCl) or distilled water. Seventy-two single-canalled roots were divided into three groups: HyFlex EDM (Coltene-Whaledent); Reciproc Blue (VDW); and F-One Blue (Shanghai Fanta) and then divided into three subgroups: NaOCl liquid (Imicrly), NaOCl gel (Cerkamed Medical) and distilled water. The amount of extruded debris was calculated by determining the dry weight of the debris collected. Data were analysed using Kruskal-Wallis test with Bonferroni correction. Debris extrusion occurred in all subgroups. Both the instrument and the irrigant had an impact. The F-One Blue tended to extrude the least debris, though no significant difference was observed in the pairwise comparisons between instruments. NaOCl liquid resulted in significantly more extruded debris than NaOCl gel or distilled water. The results lead us to conclude that the NaOCl gel reduced debris extrusion compared to NaOCl liquid.

Quantitative Assessment of the Efficacy of Two Different Single-file Systems in Reducing the Bacterial load in Oval-Shaped Canals: A Clinical Study

INTRODUCTION

This randomized clinical study compared the in vivo antibacterial efficacy of Reciproc Blue (RB), XP-endo Shaper (XP-S), and XP-endo Shaper associated with XP-endo Finisher (XP-F) systems in infected oval-shaped root canals with primary apical periodontitis.

METHODS

In this study, 28 human teeth with a single root and a single canal were randomly assigned to 2 groups according to the instrumentation technique: group 1, RB (n = 14) and group 2, XP-endo (XP-S and XP-F, n = 14). The single-rooted teeth were prepared by reciprocating and rotary nickel-titanium instruments with 5.25% sodium hypochlorite irrigation. Samples were collected from the canal at the baseline (S1), after chemomechanical preparation (S2), and after XP-F instrumentation (S3). The DNA extracts were subjected to quantitative analysis for total bacterial counts by quantitative real-time polymerase chain reaction. The data were analyzed using the analysis of variance test, and the level of significance was set at 5%.

RESULTS

All samples tested positive for the presence of bacteria at baseline, and the bacterial counts substantially reduced after treatment procedures (P < .01). The results showed no statistical difference between RB and XP-S instrumentation with respect to the bacterial reduction (P > .05). A marked bacterial reduction was observed after the use of the XP-F instrument (P < .01).

CONCLUSIONS

The XP-S and RB systems sharply reduced the bacterial load in oval-shaped root canals with primary apical periodontitis. XP-F used as a supplementary instrument to chemomechanical preparation promoted a significantly higher bacterial reduction.

Assessment of Mechanical Root Canal Preparation with Centric Reciprocating or Eccentric Rotary Kinematics: A Micro-computed Tomographic Study

INTRODUCTION

The aim of this study was to compare, using micro-computed tomographic imaging, the preparation of mesial canals of mandibular molars with the Reciproc (VDW GmbH, Munich, Germany) and XP-endo Shaper (FKG, La Chaux-de-Fonds, Switzerland) systems, evaluating changes in dentin and canal volume, the percentage of untouched walls, the volume of accumulated hard tissue debris, and root canal deviation in the apical third.

METHODS

Twenty-four mandibular molars with 2 mesial root canals and a single foramen were anatomically paired and divided into 2 experimental groups (n = 12) according to the system used. The specimens were scanned before and after preparation with the SkyScan 1176 microtomographic scanner (Bruker-microCT, Kontich, Belgium) at a resolution of 17.42 μm. The resulting data were statistically compared at a significance level of 5% using the Student t test and the Mann-Whitney test.

RESULTS

A significant difference was observed in the untouched surface area for the total canal and the cervical and middle thirds, with the lowest untouched surface area in the XP-endo Shaper group (P < .05). The volume of accumulated hard tissue debris was significantly higher in the Reciproc group in the total canal as well as in the middle and apical thirds. There was no significant difference between the groups regarding the volume of dentin removed or the increase in canal volume and surface area (P > .05).

CONCLUSIONS

The XP-endo Shaper touched more walls and left less accumulated hard tissue debris in the root canal system than the Reciproc group. Although the XP-endo Shaper showed superior results, neither system was able to fully prepare the root canal.

Comparison of antibacterial effectiveness of three rotary file system with different geometry in infected root canals before and after instrumentation-a double-blinded randomized controlled clinical trial

Introduction

To compare the antibacterial effectiveness of three rotary file systems i.e., ProTaper Next, ProTaper Gold and XP-endo Shaper in root canals of teeth with asymptomatic apical periodontitis by using the real-time polymerase chain reaction.

Materials and methods

Root canals from single or multi-rooted teeth (straight canals) with necrotic pulps and asymptomatic apical periodontitis were instrumented using either ProTaper Next (n = 20), ProTaper Gold (n = 20) and XP-endo Shaper (n = 20) under irrigation with 3% sodium hypochlorite. Samples obtained before and after instrumentation were subjected to DNA extraction, amplification and quantitation of total amount of bacteria by using the real-time polymerase chain reaction.

Results

Samples were taken before preparation (S1) were positive for presence of bacteria, with mean numbers of 9.94 × 10⁷, 20.4 × 10⁷ and 9.20 × 10⁷ bacterial cells for the ProTaper Next, ProTaper Gold and XP-endo Shaper groups, respectively. After preparation (S2) with ProTaper Next, ProTaper Gold, and XP-endo Shaper, root canals still had bacteria with mean counts of 11.8 × 10⁵, 87.2 × 10⁵ and 4.52 × 10⁵ bacterial cells, respectively. Both XP-endo Shaper (99.50%) and ProTaper Next (98.81%) were effective in reducing total bacterial count, and there was no statistically significant difference between them (P > 0.05). XP-endo Shaper succeeded in reducing total bacterial count than ProTaper Gold (95.72%) and there exists statistically significant difference between them (P < 0.05).

Conclusions

XP-endo Shaper was highly effective in reducing total bacterial count from root canals of teeth with asymptomatic apical periodontitis than ProTaper Gold. ProTaper Next also showed improved microbial reduction percentage as compared with ProTaper Gold.