Extracellular matrix as an inductive template for temporomandibular joint meniscus reconstruction: a pilot study

Engineering soft-hard tissue interfaces in dental and craniofacial system by spatially controlled bioactivities

The interface between soft and hard tissues is constituted by a gradient change of cell types and matrix compositions that are optimally designed for proper load transmission and injury protection. In the musculoskeletal system, the soft-hard tissue interfaces at tendon-bone, ligament-bone, and meniscus-bone have been extensively researched as regenerative targets. Similarly, extensive research efforts have been made to guide the regeneration of multi-tissue complexes in periodontium. However, the other soft-hard tissue interfaces in the dental and craniofacial system have been somewhat neglected. This review discusses the clinical significance of developing regenerative strategies for soft-hard tissue interfaces in the dental and craniofacial system. It also discusses the research progress in the field focused on bioengineering approaches using 3D scaffolds equipped with spatially controlled bioactivities. The remaining challenges, future perspectives, and considerations for the clinical translation of bioactive scaffolds are also discussed.

Comparison of cell-scaffold interactions in a biological and a synthetic wound matrix

Wound healing is a central physiological process that restores the barrier properties of the skin after injury, comprising close coordination between several cell types (including fibroblasts and macrophages) in the wound bed. The complex mechanisms involved are executed and regulated by an equally complex, reciprocal signalling network involving numerous signalling molecules such as catabolic and anabolic inflammatory mediators (e.g., cytokines, chemokines). In chronic wound environments, the balance in the molecular signatures of inflammatory mediators is usually impaired. Thus, we compared the ability of a collagen-based wound matrix against a synthetic wound matrix to attract fibroblasts and macrophages that deliver these signalling molecules. In particular, the balance between pro- and anti- inflammatory cytokine secretion was assessed. We found that the natural collagen-based matrix was the most efficient adhesive substrate to recruit and activate fibroblasts and macrophages on its surface. These cells secreted a variety of cytokines, and the natural biomaterial exhibited a more balanced secretion of pro- and anti-inflammatory mediators than the synthetic comparator. Thus, our study highlights the ability of native collagen matrices to modulate inflammatory mediator signatures in the wound bed, indicating that such devices may be beneficial for wound healing in the clinical setting.

The goat as a model for temporomandibular joint disc replacement: Techniques for scaffold fixation

A state-of-the-art scaffold capable of efficiently reconstructing the temporomandibular joint (TMJ) disc after discectomy remains elusive. The major challenge has been to identify a degradable scaffold that remodels into TMJ disc-like tissue, and prevents increased joint pathology, among other significant complications. Tissue engineering research provides a foundation for promising approaches towards the creation of successful implants/scaffolds that aim to restore the disc. In light of improving the quality of life of patients who undergo TMJ disc removal, it is critical to establish a preclinical animal model to evaluate the properties of promising scaffolds implanted post-discectomy and to determine the most efficient implantation procedures to ensure a more reliable in-depth evaluation of the biomaterial replacing the articular disc. The present study evaluated the outcomes of two protocols for implantation of an acellular scaffold composed of an extracellular matrix (ECM) derived from the small intestinal submucosa (SIS) of the pig, as a regenerative template for the TMJ disc in a goat model. The outcomes suggest that leaving one-half of the disc medially will allow anchoring of the device to the medial aspect of the joint while avoiding lateral displacement of the ECM scaffold. The goat model is ideal to assess the longevity of tissue-engineered solutions for the TMJ disc, considering that goats chew for 12-16 hours a day. This study provides an important reference for the selection of a suitable scaffold implantation procedure and the goat model for the development of new strategies to assess TMJ disc regeneration.

Decellularized-disc based allograft and xenograft prosthesis for the long-term precise reconstruction of temporomandibular joint disc

Currently, no effective disc reconstruction treatment strategy is clinically available for temporomandibular joint (TMJ) disc-related diseases. To address this, we developed a prosthesis construct with laser-drilled decellularized natural disc reinforced by polycaprolactone, which mimics the natural morphology, and structural, biomechanical and biological property of the TMJ disc. The construct demonstrated good biocompatibility, safety and immunological tolerance both in vitro, and in a rat subcutaneous model. During 6 months implantation in an allogeneic rabbit TMJ disc reconstruction model, the disc prosthesis maintained its integrity, collagen fiber-orientation, mechanical property, joint structural stability and prevented articular cartilage and bone from damage. Furthermore, the "upgraded" disc prosthesis obtained from decellularized porcine disc was implanted into a goat TMJ disc reconstruction model. The xenograft prosthesis, with strength and viscoelasticity similar to a natural TMJ disc, was able to restore the structure and function of TMJ up to 20 weeks. These results demonstrate the translational feasibility of an allogeneic or xenogeneic decellularized disc prosthesis for treatment of advanced TMJ disc-related diseases. STATEMENT OF SIGNIFICANCE: This study makes a significant contribution to TMJ disc disease treatment both in theory and in clinics, because: (1) it provided an innovative approach to prepare an artificial TMJ disc with decent mechanical properties and long-term condyle-protecting effect; (2) it specified an advanced decellularized method for fibrocartilage decellularization and xenograft application; (3) it developed a facile and reproducible TMJ disc reconstruction model not only for middle size animal but also for large animal study; (4) the comprehensive and unreported biomechanical tests on the natural TMJ discs would act as a valuable reference for further research in the field of artificial TMJ disc materials or TMJ disc tissue engineering; (5) it suggested a potential treatment for patients with severe TMJ diseases that were commonly met but difficult to treat in clinics.

Comparison of temporomandibular joint disc, meniscus, and intervertebral disc in fundamental characteristics and tissue engineering

The temporomandibular joint (TMJ) disc, meniscus and intervertebral disc (IVD) are three fibrocartilage discs, which play critical roles in our daily life. Their degeneration contributes to diseases such as TMJ disorders, osteoarthritis and degenerative disc disease, affecting patients' quality of life and causing substantial morbidity and mortality. Interestingly, similar in some aspects of fundamental characteristics, they exhibit differences in other aspects such as biomechanical properties. Highlighting these similarities and differences can not only benefit a comprehensive understanding of them and their pathology but also assist in future research of tissue engineering. Likewise, comparing their tissue engineering in cell sources, scaffold and stimuli can guide imitation and improvement of their engineered discs. However, the anatomical structure, function, and biomechanical characteristics of the IVD, TMJ, and Meniscus have not been compared in any meaningful depth needed to advance current tissue engineering research on these joints, resulting in incomplete understanding of them and their pathology and ultimately limiting future research of tissue engineering. This review, for the first time, comprehensively compares three fibrocartilage discs in those aspects to cast light on their similarities and differences.

Decellularized small intestine submucosa device for temporomandibular joint meniscus repair: Acute timepoint safety study

Temporomandibular joint (TMJ) Meniscus removal is an option for the patient to regain full range of motion if the disc is irreversibly damaged or unable to be reduced. However, this procedure leaves the joint vulnerable to condylar remodeling and degeneration. We have shown that extracellular matrix (ECM) scaffolds remodel into a tissue with near native TMJ meniscus in previous studies. The next step towards clinical translation is to manufacture the ECM scaffold as a device under good manufacturing practices (GMP) and test it in a pre-clinical animal study under good laboratory practices (GLP). The primary objective of this study was to evaluate the in-vivo histopathological response to a Prototype GMP manufactured device made of decellularized porcine small intestinal submucosa (SIS), by observing for signs of surrounding tissue reaction to the device that are indicative of an adverse host response in comparison to an empty control at 21 days post-surgical implantation in a canine TMJ meniscus removal and implant model in a GLP setting. The conclusive findings were that the ECM device is safe for placement in the TMJ. After 21 days post implantation, histology of tissue surrounding the device and draining lymph nodes showed that the Prototype GMP device had no negative effects compared to the empty site (as evaluated by the board-certified veterinary pathologist). Furthermore, there was a lack of negative findings for clinical pathology (hematology and clinical chemistry), mortality, and body weight/weight change. Future studies will go to one year after implantation to show that the remodel device remains as a viable tissue with near native mechanical properties.

Advances in Tissue Engineering of the Temporomandibular Joint Disc: An Overview of Current Status and Future Directions

Advances in tissue engineering have progressed to potentially offer a solution to temporomandibular joint disc (TMJ) disorders not amenable to conservative therapies. Conclusive treatment options for patients with end-stage disc disorders requires discectomy and reconstruction of the articular disc with various materials. Tissue engineering TMJ disc is a promising alternative to the limited and sometimes inadequate clinical options in the management of such disorders. However, tissue engineering is far from completion for the TMJ disc regeneration. This review briefly discusses the properties of native disc, the mechanism by which TMJ disorders manifest, and how a tissue engineered disc could assuage the problems inherent in the management of such disorders. Furthermore, the review addresses and provides updates to relevant themes of tissue engineering in regards to the TMJ disc, namely, the scaffolds, cells and biomarkers, hurdles in tissue engineering of the disc, and its application in translation to the clinical practice and future directions.

From Animal to Human: (Re)using Acellular Extracellular Matrices for Temporomandibular Disc Substitution

Current treatments for temporomandibular joint (TMJ) disc dysfunctions are not fully effective and lack regenerative capacity. Therefore, the search for tissue-engineered materials for TMJ disc substitution is critical to fill this gap. Decellularization presents tremendous potential, as it is possible to obtain an extracellular matrix with an adequate biomechanical structure and biochemical components. However, its application to the TMJ disc is still in progress, since there are few studies in the literature, and those that exist have many gaps in terms of characterisation, which is decisive to ensure its success. Ultimately, we intend to emphasize the importance of the decellularization technique for the development of an engineered TMJ disc.

Inductive Remodeling of Extracellular Matrix Scaffolds in the Temporomandibular Joint of Pigs

The temporomandibular joint (TMJ) disc is a fibrocartilaginous tissue located between the condyle of the mandible and glenoid fossa and articular eminence of the temporal bone. Damage or derangement of the TMJ disc can require surgical removal (discectomy) to restore function. Removal of the TMJ disc, however, leaves the joint space vulnerable to condylar remodeling and degradation, potentially leading to long-term complications. No consistently effective clinical option exists for repair or replacement of the disc following discectomy. This study investigates the use of an acellular scaffold composed of extracellular matrix (ECM) derived from small intestinal submucosa (SIS) as a regenerative template for the TMJ disc in a porcine model. Acellular SIS ECM scaffolds were implanted following discectomy and allowed to remodel for 2, 4, 12, and 24 weeks postimplantation. Remodeling of the implanted device was assessed by longitudinal magnetic resonance imaging (MRI) over the course of 6 months, as well as gross morphologic, histologic, biochemical, and biomechanical analysis (tension and compression) of explanted tissues (disc and condyle) at the time of sacrifice. When the scaffold remained in the joint space, longitudinal MRI demonstrated that the scaffolds promoted new tissue formation within the joint space throughout the study period. The scaffolds were rapidly populated with host-derived cells and remodeled with formation of new, dense, aligned fibrocartilage resembling native tissue as early as 1 month postimplantation. De-novo formation of peripheral muscular and tendinous attachments resembling those in native tissue was also observed. The remodeled scaffolds approached native disc biochemical composition and compressive modulus, and possessed 50% of the tensile modulus within 3 months postimplantation. No degradation of the condylar surface was observed. These results suggest that this acellular bioscaffold fills a medical need for which there is currently no effective treatment and may represent a clinically relevant "off-the-shelf" implant for reconstruction of the TMJ disc.

Mesenchymal Stem Cells Based Treatment in Dental Medicine: A Narrative Review

Application of mesenchymal stem cells (MSC) in regenerative therapeutic procedures is becoming an increasingly important topic in medicine. Since the first isolation of dental tissue-derived MSC, there has been an intense investigation on the characteristics and potentials of these cells in regenerative dentistry. Their multidifferentiation potential, self-renewal capacity, and easy accessibility give them a key role in stem cell-based therapy. So far, several different dental stem cell types have been discovered and their potential usage is found in most of the major dental medicine branches. These cells are also researched in multiple fields of medicine for the treatment of degenerative and inflammatory diseases. In this review, we summarized dental MSC sources and analyzed their treatment modalities with particular emphasis on temporomandibular joint osteoarthritis (TMJ OA).

Biological Treatments for Temporomandibular Joint Disc Disorders: Strategies in Tissue Engineering

The temporomandibular joint (TMJ) is an important structure for the masticatory system and the pathologies associated with it affect a large part of the population and impair people's lifestyle. It comprises an articular disc, that presents low regeneration capacities and the existing clinical options for repairing it are not effective. This way, it is imperative to achieve a permanent solution to guarantee a good quality of life for people who suffer from these pathologies. Complete knowledge of the unique characteristics of the disc will make it easier to achieve a successful tissue engineering (TE) construct. Thus, the search for an effective, safe and lasting solution has already started, including materials that replace the disc, is currently growing. The search for a solution based on TE approaches, which involve regenerating the disc. The present work revises the TMJ disc characteristics and its associated diseases. The different materials used for a total disc replacement are presented, highlighting the TE area. A special focus on future trends in the field and part of the solution for the TMJ problems described in this review will involve the development of a promising engineered disc approach through the use of decellularized extracellular matrices.

Biological dermal templates with native collagen scaffolds provide guiding ridges for invading cells and may promote structured dermal wound healing

Dermal substitutes are of major importance in treating full thickness skin defects. They come in a variety of materials manufactured into various forms, such as films, hydrocolloids, hydrogels, sponges, membranes, and electrospun micro- and nanofibers. Bioactive dermal substitutes act in wound healing either by delivery of bioactive compounds or by being constructed from materials having endogenous activity. The healing success rate is highly determined by cellular and physiological processes at the host-biomaterial interface during crucial wound healing steps. Hence, it is important to design appropriate wound treatment strategies with the ability to work actively with tissues and cells to enhance healing. Therefore, in this study, we investigated biological dermal templates and their potential to stimulate natural cell adherence, guidance, and morphology. The most pronounced effect was observed in biomaterials with the highest content of native collagen networks. Cell attachment and proliferation were significantly enhanced on native collagen scaffolds. Cell morphology was more asymmetrical on such scaffolds, resembling native in vivo structures. Importantly, considerably lower expression of myofibroblast phenotype was observed on native collagen scaffolds. Our data suggest that this treatment strategy might be beneficial for the wound environment, with the potential to promote improved tissue regeneration and reduce abnormal scar formation.

Tissue Engineering for the Temporomandibular Joint

Tissue engineering potentially offers new treatments for disorders of the temporomandibular joint which frequently afflict patients. Damage or disease in this area adversely affects masticatory function and speaking, reducing patients' quality of life. Effective treatment options for patients suffering from severe temporomandibular joint disorders are in high demand because surgical options are restricted to removal of damaged tissue or complete replacement of the joint with prosthetics. Tissue engineering approaches for the temporomandibular joint are a promising alternative to the limited clinical treatment options. However, tissue engineering is still a developing field and only in its formative years for the temporomandibular joint. This review outlines the anatomical and physiological characteristics of the temporomandibular joint, clinical management of temporomandibular joint disorder, and current perspectives in the tissue engineering approach for the temporomandibular joint disorder. The tissue engineering perspectives have been categorized according to the primary structures of the temporomandibular joint: the disc, the mandibular condyle, and the glenoid fossa. In each section, contemporary approaches in cellularization, growth factor selection, and scaffold fabrication strategies are reviewed in detail along with their achievements and challenges.

Preclinical Animal Models for Temporomandibular Joint Tissue Engineering

There is a paucity of in vivo studies that investigate the safety and efficacy of temporomandibular joint (TMJ) tissue regeneration approaches, in part due to the lack of established animal models. Review of disease models for study of TMJ is presented herein with an attempt to identify relevant preclinical animal models for TMJ tissue engineering, with emphasis on the disc and condyle. Although degenerative joint disease models have been mainly performed on mice, rats, and rabbits, preclinical regeneration approaches must employ larger animal species. There remains controversy regarding the preferred choice of larger animal models between the farm pig, minipig, goat, sheep, and dog. The advantages of the pig and minipig include their well characterized anatomy, physiology, and tissue properties. The advantages of the sheep and goat are their easier surgical access, low cost per animal, and its high tissue availability. The advantage of the dog is that the joint space is confined, so migration of interpositional devices should be less likely. However, each species has limitations as well. For example, the farm pig has continuous growth until about 18 months of age, and difficult surgical access due to the zygomatic arch covering the lateral aspect of joint. The minipig is not widely available and somewhat costly. The sheep and the goat are herbivores, and their TMJs mainly function in translation. The dog is a carnivore, and the TMJ is a hinge joint that can only rotate. Although no species provides the gold standard for all preclinical TMJ tissue engineering approaches, the goat and sheep have emerged as the leading options, with the minipig as the choice when cost is less of a limitation; and with the dog and farm pig serving as acceptable alternatives. Finally, naturally occurring TMJ disorders in domestic species may be harnessed on a preclinical trial basis as a clinically relevant platform for translation.

Properties of the Temporomandibular Joint in Growing Pigs

A subset of temporomandibular joint (TMJ) disorders are attributed to joint degeneration. The pig has been considered the preferred in-vivo model for the evaluation of potential therapies for TMJ disorders, and practical considerations such as cost and husbandry issues have favored the use of young, skeletally immature animals. However, the effect of growth on the biochemical and biomechanical properties of the TMJ disc and articulating cartilage has not been examined. The present study investigates the effect of age on the biochemical and biomechanical properties of healthy porcine TMJs at 3, 6, and 9 months of age. DNA , hyrdroxyproline, and glycosaminoglycan (GAG) content were determined and the discs and condyles were tested in uniaxial unconfined stress relaxation compression from 10% - 30% strain. TMJ discs were further assessed with a tensile test to failure technique, which included the ability to test multiple samples from the same region of an individual disc to minimize the intra-specimen variation. No differences in biochemical properties for the disc or compressive properties at 30% stress relaxation in the disc and condylar cartilage were found. In tension, no differences were observed for peak stress and tensile modulus. The collagen content of the condyle were higher at 9 months than 3 months (p<0.05), and the GAG content was higher at 9 months than 6 months (p<0.05). There was a trend of increased compressive instantaneous modulus with age. As such, age matched controls for growing pigs are probably appropriate for most parameters measured.

Fetal extracellular matrix nerve wraps locally improve peripheral nerve remodeling after complete transection and direct repair in rat

In peripheral nerve (PN) injuries requiring surgical repair, as in PN transection, cellular and ECM remodeling at PN epineurial repair sites is hypothesized to reduce PN functional outcomes by slowing, misdirecting, or preventing axons from regrowing appropriately across the repair site. Herein this study reports on deriving and analyzing fetal porcine urinary bladder extracellular matrix (fUB-ECM) by vacuum assisted decellularization, fabricating fUBM-ECM nerve wraps, and testing fUB-ECM nerve wrap biocompatibility and bioactivity in a trigeminal, infraorbital nerve (ION) branch transection and direct end-to-end repair model in rat. FUB-ECM nerve wraps significantly improved epi- and endoneurial organization and increased both neovascularization and growth associated protein-43 (GAP-43) expression at PN repair sites, 28-days post surgery. However, the number of neurofilament positive axons, remyelination, and whisker-evoked response properties of ION axons were unaltered, indicating improved tissue remodeling per se does not predict axon regrowth, remyelination, and the return of mechanoreceptor cortical signaling. This study shows fUB-ECM nerve wraps are biocompatible, bioactive, and good experimental and potentially clinical devices for treating epineurial repairs. Moreover, this study highlights the value provided by precise, analytic models, like the ION repair model, in understanding how PN tissue remodeling relates to axonal regrowth, remyelination, and axonal response properties.

Scaffold-Based Temporomandibular Joint Tissue Regeneration in Experimental Animal Models: A Systematic Review

Reconstruction of degenerated temporomandibular joint (TMJ) structures remains a clinical challenge. Tissue engineering (TE) is a promising alternative to current treatment options, where the TMJ is either left without functional components, or replaced with autogenous, allogeneic, or synthetic grafts. The objective of this systematic review was to answer the focused question: in experimental animal models, does the implantation of biomaterial scaffolds loaded with cells and/or growth factors (GFs) enhance regeneration of the discal or osteochondral TMJ tissues, compared with scaffolds alone, without cells, or GFs? Following PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analysis) guidelines, electronic databases were searched for relevant controlled preclinical in vivo studies. Thirty studies reporting TMJ TE strategies in both small (rodents, rabbits; n = 25) and large animals (dogs, sheep, goats; n = 5) reporting histological and/or radiographic outcomes were included. Twelve studies reported ectopic (subcutaneous) implantation models in rodents, whereas 18 studies reported orthotopic, surgically induced defect models in large animals. On average, studies presented with an unclear-to-high risk of bias. In most studies, mesenchymal stem cells or chondrocytes were used in combination with either natural or synthetic polymer scaffolds, aiming for either TMJ disc or condyle regeneration. In summary, the overall preclinical evidence (ectopic [n = 6] and orthotopic TMJ models [n = 6]) indicate that addition of chondrogenic and/or osteogenic cells to biomaterial scaffolds enhances the potential for TMJ tissue regeneration. Standardization of animal models and quantitative outcome evaluations (biomechanical, biochemical, histomorphometric, and radiographic) in future studies, would allow more reliable comparisons and increase the validity of the results.

An Official American Thoracic Society Workshop Report 2015. Stem Cells and Cell Therapies in Lung Biology and Diseases

The University of Vermont College of Medicine, in collaboration with the NHLBI, Alpha-1 Foundation, American Thoracic Society, Cystic Fibrosis Foundation, European Respiratory Society, International Society for Cellular Therapy, and the Pulmonary Fibrosis Foundation, convened a workshop, "Stem Cells and Cell Therapies in Lung Biology and Lung Diseases," held July 27 to 30, 2015, at the University of Vermont. The conference objectives were to review the current understanding of the role of stem and progenitor cells in lung repair after injury and to review the current status of cell therapy and ex vivo bioengineering approaches for lung diseases. These are all rapidly expanding areas of study that both provide further insight into and challenge traditional views of mechanisms of lung repair after injury and pathogenesis of several lung diseases. The goals of the conference were to summarize the current state of the field, discuss and debate current controversies, and identify future research directions and opportunities for both basic and translational research in cell-based therapies for lung diseases. This 10th anniversary conference was a follow up to five previous biennial conferences held at the University of Vermont in 2005, 2007, 2009, 2011, and 2013. Each of those conferences, also sponsored by the National Institutes of Health, American Thoracic Society, and respiratory disease foundations, has been important in helping guide research and funding priorities. The major conference recommendations are summarized at the end of the report and highlight both the significant progress and major challenges in these rapidly progressing fields.

Histological and Immunohistochemical Analyses of Repair of the Disc in the Rabbit Temporomandibular Joint Using a Collagen Template

A previous study demonstrated that the reconstituted type I collagen matrix extracted from rabbit tendons enabled the TMJ disc to regenerate in the rabbit. The aim of this study was to investigate changes in the extracellular matrix (ECM) and mechanisms of regeneration in the TMJ disc. In 36 New Zealand rabbits that underwent a partial discectomy, discs were replaced with reconstituted collagen templates for 3 months. A histological analysis showed that moderate to severe degeneration appeared in partially discectomized joints without implantation. In contrast, discs experienced regeneration of reconstituted collagen template implantation and the joint returned to normal function. Cells in the regenerative tissue expressed ECM, and fibers became regular and compact due to tissue remodeling over time. Reparative cells differentiated into chondroblasts, and showed highly dense pericellular fibers. The morphology and collagen composition of the disc and condyle in the 3-month experimental group were similar to those of normal tissues. In conclusion, the reconstituted collagen template facilitated the regeneration of surgically discectomized discs. Type I and type II collagens play a crucial role in the regeneration of articular discs.

Extracellular matrix bioscaffolds in tissue remodeling and morphogenesis

During normal morphogenesis the extracellular matrix (ECM) influences cell motility, proliferation, apoptosis, and differentiation. Tissue engineers have attempted to harness the cell signaling potential of ECM to promote the functional reconstruction, if not regeneration, of injured or missing adult tissues that otherwise heal by the formation of scar tissue. ECM bioscaffolds, derived from decellularized tissues, have been used to promote the formation of site appropriate, functional tissues in many clinical applications including skeletal muscle, fibrocartilage, lower urinary tract, and esophageal reconstruction, among others. These scaffolds function by the release or exposure of growth factors and cryptic peptides, modulation of the immune response, and recruitment of progenitor cells. Herein, we describe this process of ECM induced constructive remodeling and examine similarities to normal tissue morphogenesis.

Tissue engineering of the temporomandibular joint disc: current status and future trends

INTRODUCTION

Temporomandibular joint disorders are extremely prevalent and there is no ideal treatment clinically for the moment. For severe cases, a discectomy often need to be performed, which will further result in the development of osteoarthritis. In the past thirty years, tissue engineering has provided a promising approach for the effective remedy of severe TMJ disease through the creation of viable, effective, and biological functional implants.

METHODS

Although TMJ disc tissue engineering is still in early stage, unremitting efforts and some achievements have been made over the past decades. In this review, a comprehensive summary of the available literature on the progress and status in tissue engineering of the TMJ disc regarding cell sources, scaffolds, biochemical and biomechanical stimuli, and other prospects relative to this field is provided.

RESULTS AND CONCLUSIONS

Even though research studies in this field are too few compared to other fibrocartilage (e.g., knee meniscus) and numerous, difficult tasks still exist, we believe that our ultimate goal of regenerating a biological implant whose histological, biochemical, and biomechanical properties parallel native TMJ discs for clinical therapy will be achieved in the near future.

Eighth symposium on biologic scaffolds for regenerative medicine

The Eighth Symposium on Biologic Scaffolds for Regenerative Medicine was held from 24 to 26 April 2014 at the Silverado Resort in Napa, CA, USA. The symposium was well attended by a diverse audience of academic scientists, industry members and physicians from around the world. The conference showcased the strong foundation of both basic and translational research utilizing biologic scaffolds in regenerative medicine applications across nearly all tissue systems and facilitated vibrant discussions among participants. This article provides an overview of the conference by providing a brief synopsis of selected presentations, each focused on a unique research and/or clinical investigation currently underway.

ECM hydrogel coating mitigates the chronic inflammatory response to polypropylene mesh

Polypropylene has been used as a surgical mesh material for several decades. This non-degradable synthetic polymer provides mechanical strength, a predictable host response, and its use has resulted in reduced recurrence rates for ventral hernia and pelvic organ prolapse. However, polypropylene and similar synthetic materials are associated with a chronic local tissue inflammatory response and dense fibrous tissue deposition. These outcomes have prompted variations in mesh design to minimize the surface area interface and increase integration with host tissue. In contrast, biologic scaffold materials composed of extracellular matrix (ECM) are rapidly degraded in-vivo and are associated with constructive tissue remodeling and minimal fibrosis. The objective of the present study was to assess the effects of an ECM hydrogel coating on the long-term host tissue response to polypropylene mesh in a rodent model of abdominal muscle injury. At 14 days post implantation, the ECM coated polypropylene mesh devices showed a decreased inflammatory response as characterized by the number and distribution of M1 macrophages (CD86+/CD68+) around mesh fibers when compared to the uncoated mesh devices. At 180 days the ECM coated polypropylene showed decreased density of collagen and amount of mature type I collagen deposited between mesh fibers when compared to the uncoated mesh devices. This study confirms and extends previous findings that an ECM coating mitigates the chronic inflammatory response and associated scar tissue deposition characteristic of polypropylene.

Extracellular matrix as an inductive scaffold for functional tissue reconstruction

The extracellular matrix (ECM) is a meshwork of both structural and functional proteins assembled in unique tissue-specific architectures. The ECM both provides the mechanical framework for each tissue and organ and is a substrate for cell signaling. The ECM is highly dynamic, and cells both receive signals from the ECM and contribute to its content and organization. This process of "dynamic reciprocity" is key to tissue development and for homeostasis. Based upon these important functions, ECM-based materials have been used in a wide variety of tissue engineering and regenerative medicine approaches to tissue reconstruction. It has been demonstrated that ECM-based materials, when appropriately prepared, can act as inductive templates for constructive remodeling. Specifically, such materials act as templates for the induction of de novo functional, site-appropriate, tissue formation. Herein, the diverse structural and functional roles of the ECM are reviewed to provide a rationale for the use of ECM scaffolds in regenerative medicine. Translational examples of ECM scaffolds in regenerative are provided, and the potential mechanisms by which ECM scaffolds elicit constructive remodeling are discussed. A better understanding of the ability of ECM scaffold materials to define the microenvironment of the injury site will lead to improved clinical outcomes associated with their use.

Engineering functional anisotropy in fibrocartilage neotissues

The knee meniscus, intervertebral disc, and temporomandibular joint (TMJ) disc all possess complex geometric shapes and anisotropic matrix organization. While these characteristics are imperative for proper tissue function, they are seldom recapitulated following injury or disease. Thus, this study's objective was to engineer fibrocartilages that capture both gross and molecular structural features of native tissues. Self-assembled TMJ discs were selected as the model system, as the disc exhibits a unique biconcave shape and functional anisotropy. To drive anisotropy, 50:50 co-cultures of meniscus cells and articular chondrocytes were grown in biconcave, TMJ-shaped molds and treated with two exogenous stimuli: biomechanical (BM) stimulation via passive axial compression and bioactive agent (BA) stimulation via chondroitinase-ABC and transforming growth factor-β1. BM + BA synergistically increased Col/WW, Young's modulus, and ultimate tensile strength 5.8-fold, 14.7-fold, and 13.8-fold that of controls, respectively; it also promoted collagen fibril alignment akin to native tissue. Finite element analysis found BM stimulation to create direction-dependent strains within the neotissue, suggesting shape plays an essential role toward driving in vitro anisotropic neotissue development. Methods used in this study offer insight on the ability to achieve physiologic anisotropy in biomaterials through the strategic application of spatial, biomechanical, and biochemical cues.

Autologous adipose stem cells and polylactide discs in the replacement of the rabbit temporomandibular joint disc

The temporomandibular joint (TMJ) disc lacks functional replacement after discectomy. We investigated tissue-engineered bilayer polylactide (PLA) discs and autologous adipose stem cells (ASCs) as a potential replacement for the TMJ disc. These ASC discs were pre-cultured either in control or in differentiation medium, including transforming growth factor (TGF)-β1 for one week. Prior to implantation, expression of fibrocartilaginous genes was measured by qRT-PCR. The control and differentiated ASC discs were implanted, respectively, in the right and left TMJs of rabbits for six (n = 5) and 12 months (n = 5). Thereafter, the excised TMJ areas were examined with cone beam computed tomography (CBCT) and histology. No signs of infection, inflammation or foreign body reactions were detected at histology, whereas chronic arthrosis and considerable condylar hypertrophy were observed in all operated joints at CBCT. The left condyle treated with the differentiated ASC discs appeared consistently smoother and more sclerotic than the right condyle. The ASC disc replacement resulted in dislocation and morphological changes in the rabbit TMJ. The ASC discs pre-treated with TGF-β1 enhanced the condylar integrity. While adverse tissue reactions were not shown, the authors suggest that with improved attachment and design, the PLA disc and biomaterial itself would hold potential for TMJ disc replacement.

Inductive, scaffold-based, regenerative medicine approach to reconstruction of the temporomandibular joint disk

PURPOSE

A device composed of extracellular matrix (ECM) was investigated as an inductive template in vivo for reconstruction of the temporomandibular joint (TMJ) disk after discectomy.

MATERIALS AND METHODS

A scaffold material composed of porcine-derived ECM was configured to mimic the shape and size of the TMJ. This device was implanted in a canine model of bilateral TMJ discectomy. After discectomy, 1 side was repaired with an ECM scaffold material and the contralateral side was left empty as a control. At 6 months after implantation, the joint space was opened, the joints were evaluated for signs of gross pathologic degenerative changes, and newly formed tissue was excised for histologic, biochemical, and biomechanical analysis.

RESULTS

The results showed that implantation of an initially acellular material supported the formation of site-appropriate, functional host tissue that resembled that of the native TMJ disk. Furthermore, this prevented gross degenerative changes in the temporal fossa and mandibular condyle. No tissue formation and mild to severe gross pathologic changes were observed in the contralateral controls.

CONCLUSIONS

These results suggest that an ECM-based bioscaffold could represent an off-the-shelf solution for TMJ disk replacement.