RSM optimized Moringa oleifera peel extract for green synthesis of M. oleifera capped palladium nanoparticles with antibacterial and hemolytic property

Green synthesis and characterisation of Desmodium podocarpum mediated silver nanoparticles and their biological activities

This research explored silver nanoparticles (AgNPs) from Desmodium podocarpum rhizome using the green approach and their possible antibacterial, phytotoxic, and haemolytic activities. The change in the colour from transparent to light brown and finally to colloidal brown indicates the synthesis of nanoparticles. The synthesised AgNPs were analysed by UV-Vis spectrophotometer, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform infra-red spectroscopy and energy dispersive X-ray. The analysis indicates the successful reduction of Ag+2 ions to Ago with spherical particle size 16-55 nm. The prepared AgNPs inhibit the growth of Escherichia coli, Salmonella typhi, Staphylococcus aureus and Pseudomonas aeruginosa. It showed 70% phytotoxic potential and 12% haemolysis at high concentrations. Altogether, these results strongly suggest that D. podocarpum-mediated AgNPs could be used eco-friendly to limit microbial growth without any significant cytotoxic effect on human cells.

Biosynthesis of Palladium Nanoparticles by Using Aqueous Bark Extract of Quercus dalechampii, Q. frainetto, and Q. petraea for Potential Antioxidant and Antimicrobial Applications

This study aimed to synthesize palladium nanoparticles (PdNPs) using bioactive compounds from aqueous extracts of Quercus species (Quercus dalechampii, Quercus frainetto, and Quercus petraea) with potential biomedical applications. To optimize PdNPs biosynthesis, various parameters were explored, including the concentration of PdCl2, the extract-to-PdCl2 ratio, and the pH of the solution. The nanoparticles were characterized using ultraviolet/visible spectroscopy (UV/Vis), Fourier-transform infrared spectroscopy (FTIR), and dynamic light scattering (DLS). Total polyphenol content was measured using the Folin-Ciocâlteu method, while antioxidant capacity was evaluated through radical neutralization assays, including ABTS and DPPH, and through iron and copper reduction tests. Antimicrobial activity was tested against Gram-positive and Gram-negative bacteria, as well as Candida species. Phenolic compounds and flavonoids from the extracts were essential for the reduction in palladium ions and the stabilization of the nanoparticles. UV/Vis spectroscopy showed a distinct surface plasmon resonance peak, indicating the successful formation of PdNPs. FTIR analysis confirmed the interaction between the bioactive compounds and PdNPs, revealing characteristic peaks of phenolic groups. DLS analysis indicated a hydrodynamic diameter of 63.9 nm for QD-PdNPs, 48 nm for QF-PdNPs, and 63.1 nm for QP-PdNPs, highlighting good dispersion and stability in solution. Although the PdNPs did not exhibit strong antioxidant properties, they demonstrated selective antimicrobial activity, especially against Staphylococcus aureus and methicillin-resistant Staphylococcus aureus (MRSA). PdNPs also exhibited significant antifungal activity against Candida krusei, with a minimum inhibitory concentration (MIC) of 0.63 mg/mL, indicating their ability to compromise fungal cell integrity. This study contributes to developing eco-friendly biosynthesis methods for metallic nanoparticles and underscores the potential of PdNPs in various applications, including in the biomedical field.

Bioactive compounds, nanoparticles synthesis, health benefits and potential utilization of edible flowers for the development of functional dairy products: a review

The food sector faces difficulty meeting the expectations for high-quality food items with safe and clean perceptions in light of customers' increased concern and economic sanctions of synthetic and hazardous chemicals. Besides their widespread use as decoration, flowers are known to be consumed as a traditional food or a component of complementary therapy in many different civilizations worldwide. Because of their nutritional importance as a source of nutrients, proteins, essential amino acids, bioactive compounds, etc., many edible flowers can be viewed as a food source rather than just a delicacy or decoration. Polyphenols, flavonoids, and carotenoids are the phytochemicals that make up the bioactive components of edible flowers. These substances have anti-inflammatory, antibacterial, and antioxidant properties that can improve the nutritional profile of dairy products. Nanoparticles have become a cutting-edge strategy to make use of these advantages. In addition to encapsulating and protecting medicinal substances, nanoparticles made from edible flowers also enable regulated release, increasing bioavailability and durability. Numerous opportunities exist for the addition of edible flower- nanoparticles to dairy products. Their inclusion can add distinctive flavours, colours, and sensations, boosting the consumer's sensory perception. This review quotes the recent studies and discusses different aspects such as nanoparticle synthesis, quantification and characterization, health benefits, novel ingredient for the development of functional food, and the bioactive compounds for different varieties of edible flowers.Kindly check and confirm the edit made in the title.  The final title  is : "Bioactive compounds,nanoparticles synthesis, health benefits andpotential utilization of edible flowers for thedevelopment of functional dairy products: areview".

Graphical abstract

A comprehensive review on Moringa oleifera nanoparticles: importance of polyphenols in nanoparticle synthesis, nanoparticle efficacy and their applications

Moringa oleifera is one of the popular functional foods that has been tremendously exploited for synthesis of a vast majority of metal nanoparticles (NPs). The diverse secondary metabolites present in this plant turn it into a green tool for synthesis of different NPs with various biological activities. In this review, we discussed different types of NPs including silver, gold, titanium oxide, iron oxide, and zinc oxide NPs produced from the extract of different parts of M. oleifera. Different parts of M. oleifera take a role as the reducing, stabilizing, capping agent, and depending on the source of extract, the color of solution changes within NP synthesis. We highlighted the role of polyphenols in the synthesis of NPs among major constituents of M. oleifera extract. The different synthesis methods that could lead to the formation of various sizes and shapes of NPs and play crucial role in biomedical application were critically discussed. We further debated the mechanism of interaction of NPs with various sizes and shapes with the cells, and further their clearance from the body. The application of NPs made from M. oleifera extract as anticancer, antimicrobial, wound healing, and water treatment agent were also discussed. Small NPs show better antimicrobial activity, while they can be easily cleared from the body through the kidney. In contrast, large NPs are taken by the mono nuclear phagocyte system (MPS) cells. In case of shape, the NPs with spherical shape penetrate into the bacteria, and show stronger antibacterial activity compared to the NPs with other shapes. Finally, this review aims to correlate the key characteristics of NPs made from M. oleifera extract, such as size and shape, to their interactions with the cells for designing and engineering them for bio-applications and especially for therapeutic purposes.

Optimization of synergic antibacterial activity of Punica granatum L. and Areca nut (P.G.L.A.N) extracts through response surface methodology

The primary objective of this study was to evaluate the use of natural compounds as opposed to chemical preservatives. This study employed response methodology to evaluate the synergistic antibacterial effect of Areca nut and Punica granatum L. extract. Independent variables included extract type (Punica granatum L., Areca nut, and their mixture), solvent (water, ethanol, methanol), bacterial type (S. aureus, Salmonella, E. coli), and extract concentration (1, 10, 100 mg/L). The sensitivity was determined using the disk diffusion method, and the diameter of the inhibitory zone was measured. On the specified bacteria, the MIC (minimum inhibitory concentration) and MBC (minimum bactericidal concentration) of each extract were ascertained using the serial dilution method. This study revealed the existence of beneficial synergistic effects between the two extracts. Results indicated that the ethanolic extracts of Punica granatum L. and Areca nut had a synergistic effect on E. coli.

Metal nanoparticles produced by plants with antibacterial properties against Staphylococcus aureus

Staphylococcus aureus (S. aureus) is a pathogenic bacteria that causes a variety of potentially fatal infections. The emergence of antibiotic-resistant strains of S. aureus has made treatment even more difficult. In recent years, nanoparticles have been used as an alternative therapeutic agent for S. aureus infections. Among various methods for the synthesis of nanoparticles, the method utilizing plant extracts from different parts of a plant, such as root, stem, leaf, flower, seeds, etc. is gaining widespread usage. Phytochemicals present in plant extract are an inexpensive, eco-friendly, natural material that act as reducing and stabilization agent for the nanoparticle synthesis. The utilization of plant-fabricated nanoparticles against S. aureus is currently in trend. The current review discusses recent findings in the therapeutic application of phytofabricated metal-based nanoparticles against Staphylococcus aureus.

Synthesis methods and applications of palladium nanoparticles: A review

Palladium (Pd) is a key component of many catalysts. Nanoparticles (NPs) offer a larger surface area than bulk materials, and with Pd cost increasing 5-fold in the last 10 years, Pd NPs are in increasing demand. Due to novel or enhanced physicochemical properties that Pd NPs exhibit at the nanoscale, Pd NPs have a wide range of applications not only in chemical catalysis, but also for example in hydrogen sensing and storage, and in medicine in photothermal, antibacterial, and anticancer therapies. Pd NPs, on the industrial scale, are currently synthesized using various chemical and physical methods. The physical methods require energy-intensive processes that include maintaining high temperatures and/or pressure. The chemical methods usually involve harmful solvents, hazardous reducing or stabilizing agents, or produce toxic pollutants and by-products. Lately, more environmentally friendly approaches for the synthesis of Pd NPs have emerged. These new approaches are based on the use of the reducing ability of phytochemicals and other biomolecules to chemically reduce Pd ions and form NPs. In this review, we describe the common physical and chemical methods used for the synthesis of Pd NPs and compare them to the plant- and bacteria-mediated biogenic synthesis methods. As size and shape determine many of the unique properties of Pd NPs on the nanoscale, special emphasis is given to the control of these parameters, clarifying how they impact current and future applications of this exciting nanomaterial.

Facile synthesis of biogenic palladium nanoparticles using biomass strategy and application as photocatalyst degradation for textile dye pollutants and their in-vitro antimicrobial activity

Among biological applications, plant-mediated Pd NPs for multi-drug resistance (MDR) developed in pathogenic bacteria were synthesized with the help of biomass of lemon peel, a biological material, with a non-toxic, environmentally friendly, human-nature green synthesis method. Characterization of synthesized Pd NPs was carried out by UV-Vis spectrometry, Transmissive Electron Microscopy (TEM), X-ray diffraction (XRD), and Fourier Transform Infrared Spectroscopy (FTIR) techniques. According to TEM analysis, Pd NPs were confirmed to be in a spherical shape and the mean particle size was determined to be 4.11 nm. The crystal structure of Pd NPs was checked using XRD analysis and the mean particle size was observed to be 6.72 nm. Besides, the antibacterial activity of Pd NPs was determined against Escherichia coli (E. coli) (ATCC 8739), Bacillus subtilis (B. subtilis ATCC 6633), Staphylococcus aureus (S. aureus ATCC 6538), Klebsiella pneumoniae (K. pneumoniae ATCC 11296) and Serratia marcescens (S. marcescens ATCC) bacteria. Antibacterial activity was determined to be high in Pd NPs which is in conformance with the results acquired. The Pd NPs showed good photocatalytic activity, after 90 min illumination, about 81.55% and 68.45% of MB and MO respectively were catalysed by the Pd NPs catalyst, and 74.50% of RhB dyes were removed at 120 min of illumination. Within the scope of this project, it is recommended to use Pd NPs obtained by the green synthesis in the future as an antibacterial agent in biomedical use and for the cleaning of polluted waters.

A Critical Review of the Antimicrobial and Antibiofilm Activities of Green-Synthesized Plant-Based Metallic Nanoparticles

Metallic nanoparticles (MNPs) produced by green synthesis using plant extracts have attracted huge interest in the scientific community due to their excellent antibacterial, antifungal and antibiofilm activities. To evaluate these pharmacological properties, several methods or protocols have been successfully developed and implemented. Although these protocols were mostly inspired by the guidelines from national and international regulatory bodies, they suffer from a glaring absence of standardization of the experimental conditions. This situation leads to a lack of reproducibility and comparability of data from different study settings. To minimize these problems, guidelines for the antimicrobial and antibiofilm evaluation of MNPs should be developed by specialists in the field. Being aware of the immensity of the workload and the efforts required to achieve this, we set out to undertake a meticulous literature review of different experimental protocols and laboratory conditions used for the antimicrobial and antibiofilm evaluation of MNPs that could be used as a basis for future guidelines. This review also brings together all the discrepancies resulting from the different experimental designs and emphasizes their impact on the biological activities as well as their interpretation. Finally, the paper proposes a general overview that requires extensive experimental investigations to set the stage for the future development of effective antimicrobial MNPs using green synthesis.

Recent Advances in Green Synthesis, Characterization, and Applications of Bioactive Metallic Nanoparticles

Nanoparticles (NPs) are elements derived from a cluster of atoms with one or more dimensions in the nanometer scale in the range of 1–100 nm. The bio nanofabrication of metallic NPs is now an important dynamic area of research, with major significance in applied research. Biogenic synthesis of NPs is more desirable than physical and chemical synthesis due to its eco-friendliness, non-toxicity, lower energy consumption, and multifunctional nature. Plants outperform microorganisms as reducing agents as they contain large secondary biomolecules that accelerate the reduction and stability of the NPs. The produced NPs can then be studied spectroscopically (UV-Visible, XRD, Raman, IR, etc.) and microscopically (SEM, TEM, AFM, etc.). The biological reduction of a metallic ion or its oxide to a nanoparticle is quick, simple, and may be scaled up at room temperature and pressure. The rise in multi-drug resistant (MDR) microbes due to the immoderate use of antibiotics in non-infected patients is a major cause of morbidity and mortality in humans. The contemporary development of a new class of antibiotics with different mechanisms of action to kill microbes is crucial. Metals and their oxides are extremely toxic to microbes at unprecedentedly low concentrations. In addition, prevailing infections in plants and animals are raising significant concerns across the globe. NPs’ wide range of bioactivity makes them ideal antimicrobial agents in agricultural and medical fields. The present review outlines the synthesis of metallic NPs from botanicals, which enables the metals to be in a stabilized form even after ionization. It also presents a valuable database on the biofunctionalization of synthesized NPs for further drug development.

H, G. L. B, Pradeepkiran JA, Padhy H. Sunflower-Assisted Bio-Derived ZnO-NPs as an Efficient Nanocatalyst for the Synthesis of Novel Quinazolines with Highly Antioxidant Activities

The present report presents a green method for the rapid biogenic synthesis of nanoparticles that offers several advantages over the current chemical and physical procedures. It is easy and fast, eco-friendly, and does not involve any precious elements, hazardous chemicals, or harmful solvents. The synthesized ZnO nanoparticles were characterized using different techniques, such as UV-Visible spectroscopy. The surface plasmon resonance confirmed the formation of ZnO nanoparticles at 344 nm, using UV-Visible spectroscopy. The leaf extract acts as a source of phytochemicals and is primarily used for the reduction and then the formation of stable ZnO nanoparticles by the characteristic functional groups of the extract; the synthesized ZnO nanoparticles were identified using FTIR spectroscopy. The crystalline nature of ZnO-NPs was confirmed via powder X-ray diffraction (XRD). Size and morphology were measured via high resolution transmission electron microscopy (HR-TEM) analysis. The stability of the nanoparticles is established using dynamic light scattering (DLS) and thermogravimetric analysis (TGA). The synthesized ZnO nanoparticles have been found to be a good and efficient catalyst for the synthesis of novel 1,2-dihydro quinazoline derivatives under the green method via a one-pot reaction of 2-amino benzophenone, 1,3-diphenyl-1H-pyrazole carbaldehydes, and ammonium acetate. The synthesized compounds (4a–o) were characterized by the ¹H NMR, ¹³C NMR, and HRMS spectra and were further validated for free-radical scavenging activity. The synthesized ZnO nanoparticles exhibited good antioxidant activity.

Litchi chinensis inspired nanoformulations: a synergy guided approach for unraveling promising cytotoxic attributes of metal and nonmetal conjugates

In present study, diverse Litchi chinensis-mediated nanostructures in combination with 5-fluorouracil drug were fabricated viz. Au, Se, Ag, Ag-Se, Ag-Au, 5-FU Ag-Se and 5-FU Ag-Au with subsequent characterization and scrutinization of their anticarcinogenic capabilities. UV-Visible spectroscopic analysis confirmed the state transition for each precursor salt. XRD and transmission electron microscopy analysis revealed spherical/quasispherical nanostructures with monoclinic crystalline organization ranged between 18 nm and 38 nm. FTIR analysis revealed fabricated nanoparticles to be capped with various phytoconstituents. DLS and Zeta potential analysis of unloaded and drug-loaded bielemental nanoparticles (BNPs) showed comparatively large hydrodynamic particle size distribution and sufficient stability of nanoparticles. BNPs showed promising lethality concentrations for brine shrimp (LC50 < 2 μg/ml) and antitumor (LC50 < 10 μg/ml) assessments. These findings were in positive correlation with the antioxidant inhibitory concentrations IC50 (74.2-180.1 μg/ml) of the tested entities. Ag-Se and Ag-Au were loaded with 5-FU (loading efficiency of 47% ± 1.14 and 25% ± 0.32, respectively) in light of their promising cytotoxic actions. All nanostructures showed profound hemocompatibility with maximum hemolytic activity as low as 2.4%. Highly significant difference (P < 0.01) was observed in antineoplastic potentials of unloaded and 5-FU loaded BNPs against HepG2 and HT144, with most substantial IC50 for 5-FU Ag-Au (8.95 ± 2.86 μg/ml). 5-FU Ag-Au was identified as a significant inducer of DNA fragmentation with maximum relative tail moment (HepG2: 3.45 ± 0.21) among all treatments.

An overview of the phytosynthesis of various metal nanoparticles

Nanotechnology is an emerging branch of science wherein various valuable molecules with altered properties can be synthesized and utilized for numerous technological applications. Nowadays, nanotechnology is the preferred tool for the agriculture, food, and medicine industries. However, consistent accumulation of toxic by-products during the synthesis of nanoparticles from the established physical and chemical methods imposes an unprecedented danger to the environment and human well-being. The biological route for the synthesis of nanoparticles offers a potential option over the conventional chemical synthesis process due to the involvement of non-toxic and environmentally friendly materials, such as plants, fungi, bacteria, etc. Phytosynthesis, a type of biological synthesis, utilizes various combinations of secondary metabolites from different plant parts (whole plant, leaves, fruit peel, root, bark, seeds, and stem) for non-toxic and environmentally friendly nanoparticles fabrication. Non-toxic and environmentally friendly secondary metabolites derived from plants are the sources of reducing and capping agents during the biosynthesis of nanoparticles which proceeds in a controlled manner with desired characteristics. Phytosynthesis of nanoparticles is also a simple, economic, durable, and reproducible process. The present article is a comprehensive depiction of the synthesis of different metal nanoparticles from diverse plant species.

Green Synthesis of Pd Nanoparticles for Sustainable and Environmentally Benign Processes

Among transition metal nanoparticles, palladium nanoparticles (PdNPs) are recognized for their high catalytic activity in a wide range of organic transformations that are of academic and industrial importance. The increased interest in environmental issues has led to the development of various green approaches for the preparation of efficient, low-cost and environmentally sustainable Pd-nanocatalysts. Environmentally friendly solvents, non-toxic reducing reagents, biodegradable capping and stabilizing agents and energy-efficient synthetic methods are the main aspects that have been taken into account for the production of Pd nanoparticles in a green approach. This review provides an overview of the fundamental approaches used for the green synthesis of PdNPs and their catalytic application in sustainable processes as cross-coupling reactions and reductions with particular attention afforded to the recovery and reuse of the palladium nanocatalyst, from 2015 to the present.

Evaluating antimicrobial activities of Acanthus ilicifolius L. and Heliotropium curassavicum L against bacterial pathogens: an in-vitro study

BACKGROUND

Biomedical research, recently, focus more on searching for biomasses that contain extractable biologically active components for formulating new drugs. Halophytes growing in hyper saline conditions are expected to produce stress alleviating bioactive compounds. These phytochemicals could be the better raw materials for formulating new drugs.

METHODS

The purpose of this work was to describe physiologically active compounds from Acanthus ilicifolius and Heliotropium curassavicum that had antimicrobial, antioxidant and nutraceutical properties utilizing a variety of solvents. Analysis of bioactive compounds included the application of common phytochemical screening assays, proximate analysis, FTIR analysis and antioxidant assays. The disc diffusion technique was used to determine the antibacterial activity of the plant extracts.

RESULTS

Highest extraction yield was observed with methanol. A. ilicifolius methanolic extracts included a variety of bioactive components, including alkaloids, saponins, phenolics, flavonoids, steroids, cardiac glycosides, tannins, and terpenoids. H. curassavicum extracts showed the presence of all the phytochemicals except cardiac glycosides. The overall phenolic concentration and antioxidant capacity of A. ilicifolius were substantially greater. The antimicrobial assays explored that among the tested bacterial pathogens viz., Bacillus subtilis, Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Streptococcus pneumoniae, significant level of control was observed in E. coli, K. pneumoniae and B. subtilis, which were significantly susceptible to both the plant extracts at a concentration of 50 μg/ml.

CONCLUSION

The reports from the current investigation explored the possibility of utilizing these halophytes in nutraceutical formulations. The current study sheds light on the possibility of halophytes as natural secondary metabolites and bioactive chemicals with potential for antimicrobials.

Bio-prospective potential of Pleurotus djamor and Pleurotus florida mycelial extracts towards Gram positive and Gram negative microbial pathogens causing infectious disease

BACKGROUND

The emergence of resistance to commonly used antibiotics by human infections occurred mostly due to their overuse, that prompted individuals to pursue novel and innovative treatments. The phytochemical characteristics, antibacterial activity, and cytotoxicity of MCF7 cells were evaluated in two Pleurotus spp. mycelial extracts in this work.

METHODS

Pleurotus djamor and Pleurotus florida mycelial extracts from pure cultures were tested for antibacterial activity by a well-diffusion assay and antimicrobial activity against mold fungi was evaluated for biomass inhibition. Mycelial extracts were obtained from dichloromethane extracts and their biophysical characteristics are analyzed by UV-vis spectrum and FTIR analysis. By spraying detection reagents onto TLC plates, the chemicals in dichloromethane extraction of chosen mushroom fungus mycelia were identified. Using the MTT test, the cytotoxic effect of dichloromethane extracts of selected mushroom fungi was evaluated on MCF7 Cell lines.

RESULTS

Mycelial extracts of P. djamor and P. florida exhibited significant antimicrobial effect on the bacterial and fungal pathogens tested. Dichloromethane mycelial extracts were obtained using soxhlet extraction which response positive for various phytochemical analysis. Detection of metabolites in thin layer chromatography using spray reagents documented one of few first accounts on flavonoids, anthroquinone and terpenoid compounds in P. djamor and P. florida. P. djamor and P. florida had dose-dependent antiproliferative activity against MCF7 cells, with an inhibitory impact of 55.72% and 64.47% percent at 125 μg/mL, respectively.

CONCLUSION

The study has reported the identification with the potent biological activity of some of the key bioactive components present in DCM extracts from the mycelia of P. djamor and P. florida.

Cytotoxicity properties of plant-mediated synthesized K-doped ZnO nanostructures

In this study, potassium-doped zinc oxide nanoparticles (K-doped ZnO NPs) were green-synthesized using pine pollen extracts based on bioethics principles. The synthesized NPs were analyzed using X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDXA), and transmission electron microscopy (TEM). The cytotoxicity of these nanoparticles (NPs) on normal macrophage cells and cancer cell lines was evaluated. In the same concentrations of K-doped ZnO and pure ZnO NPs, K-doped ZnO NPs demonstrated higher toxicity. The results confirmed that the doped potassium could increase cytotoxicity. The IC₅₀ of K-doped ZnO NPs, pure ZnO NPs, and the examined control drug were 497 ± 15, 769 ± 12, and 606 ± 19 µg/mL, respectively. Considering the obtained IC₅₀ of K-doped ZnO NPs, they were more toxic to the cancer cell lines and had less cytotoxicity on normal macrophage cells.

Prospective Application of Nanoparticles Green Synthesized Using Medicinal Plant Extracts as Novel Nanomedicines

The use of medicinal plants in green synthesis of metal nanoparticles is increasing day by day. A simple search for the keywords "green synthesis" and "nanoparticles" yields more than 33,000 articles in Scopus. As of August 10, 2021, more than 4000 articles have been published in 2021 alone. Besides demonstrating the ease and environmental-friendly route of synthesizing nanomaterials, many studies report the superior pharmacological properties of green synthesized nanoparticles compared to those synthesized by other methods. This is probably due to the fact that bioactive molecules are entrapped on the surface of these nanoparticles. On the other hand, recent studies have confirmed the nano-dimension and biocompatibility of metal ash (Bhasma) preparations, which are commonly macerated with biological products and administered for the treatment of various diseases in Indian medicine since ancient times. This perspective article argues for the prospective medical application of green nanoparticles in the light of Bhasma.

Phytoassisted synthesis and characterization of palladium nanoparticles (PdNPs); with enhanced antibacterial, antioxidant and hemolytic activities

With increasing demand for the treatment of microbial resistance around the globe, it is necessary to develop metallic nanoparticles , ideally by the use of nontoxic medium i.e. plant constituents, that could arrest the microbial growth. For this reason, small and highly crystalline PdNPs were effectively synthesized by using Eryngium caeruleum leaf extract as both the reducing and capping agent. During the synthesis of PdNPs, the size and shape were made controlled by using different solvents i.e., ethanol, methanol and aqueous extract of Eryngium caeruleum. A series of physicochemical characterizations were applied to inquire the synthesis, crystal structure, particles size, and surface morphology of PdNPs. Furthermore, the PdNPs demonstrated excellent potential for the inactivation of gram-positive and gram-negative bacteria, where the methanol-PdNPs exhibited maximum growth inhibition zones against tested bacteria as compared to ethanol-PdNPs and aqueous-PdNPs. Besides, PdNPs showed better antioxidant activity to effectively scavenge 2, 2 diphenyl-1-picrylhydrazyl (DPPH). More importantly, the synthesized PdNPs are not only active for ROS generation but also show no hemolytic activity. We believe that this greener approach uncovered the useful and efficient applications of highly active PdNPs and their biocompatibility.

Visible light assisted photocatalytic degradation of commercial dyes and waste water by Sn-F co-doped titanium dioxide nanoparticles with potential antimicrobial application

The disintegration of natural water sources signals out the scarcity of adam's ale and will be hurdle for the human physical state. So it is necessary to decrease waste loads and hence pressure on the ecology for the sustainability of fishery and dye industry. Herein, TiO₂ nanoparticles doped with Sn and F are synthesized and the influence of simultaneous doping on the optical, surface morphological, structural, photocatalytic and antibacterial activities are investigated. Doping of TiO₂ with Sn and F suppress the growth of both anatase and rutile phase because of the dissimilar boundaries. All the prepared doped and undoped samples are found to possess tetragonal structure. The influence of F and Sn in TiO₂ lattice is recognized with the XRD and FT-IR spectra of the prepared particles The size of the obtained nanoparticles decreases as increasing concentration of F and Sn. TiO₂ is showing the presence of spherical and ellipsoidal nanoparticles whereas doped samples showing nanobulk, pentagons and rods. The absorption edge of the doped samples are blue shifted with increasing concentration of dopants indicates the control of optical absorption property of TiO_2. The visible light assisted photocatalytic degradation of fish processing waste water by doped and undoped samples are found to be established as 0.0076/min and 0.0071/min respectively. Visible light assisted degradation of commercially available dyes and fish processing waste water is assessed. Methyl blue showed enhanced photocatalytic activity under visible light irradiation compared to Methyl orange. It is observed that all the prepared particles show good antimicrobial activity against Staphylococcus aureus.

Green Synthesis of Transition-Metal Nanoparticles and Their Oxides: A Review

In recent years, many researchers have begun to shift their focus onto the synthesis of nanomaterials as this field possesses an immense potential that may provide incredible technological advances in the near future. The downside of conventional synthesis techniques, such as co-precipitation, sol-gel and hydrothermal methods, is that they necessitate toxic chemicals, produce harmful by-products and require a considerable amount of energy; therefore, more sustainable fabrication routes are sought-after. Biological molecules have been previously utilized as precursors for nanoparticle synthesis, thus eliminating the negative factors involved in traditional methods. In addition, transition-metal nanoparticles possess a broad scope of applications due to their multiple oxidation states and large surface areas, thereby allowing for a higher reactivity when compared to their bulk counterpart and rendering them an interesting research topic. However, this field is still relatively unknown and unpredictable as the biosynthesis of these nanostructures from fungi, bacteria and plants yield undesired diameters and morphologies, rendering them redundant compared to their chemically synthesized counterparts. Therefore, this review aims to obtain a better understanding on the plant-mediated synthesis process of the major transition-metal and transition-metal oxide nanoparticles, and how process parameters—concentration, temperature, contact time, pH level, and calcination temperature affect their unique properties such as particle size, morphologies, and crystallinity.

The effect of moringa leaf extracton increasing hemoglobin and bodyweight in post-disaster pregnant women

OBJECTIVE

The purpose of this study was to analyze the effect of extract of Moringa leaves extract to reduce the incidence of anemia by measuring hemoglobin level (Hb), upper arm circumference (UAC) and body weight (BW) on post-disaster pregnant women. It also aimed to determine the effect of moringa leaves extract on Hb level, UAC and BW of pregnant women.

METHOD

This research used a quasi experiment with a randomized controlled double blind design. A sample of 40 pregnant women were divided into two groups, namely the intervention group of 20 people and the control group of 20 people. The intervention group was given capsules of Moringa leaf extract and iron capsules every day. The control group was only given iron capsules.

RESULT

The characteristics of respondents in the two groups before intervention and put it before were not different. To show there is a difference after the intervention, the Hb level of pregnant women in the intervention group significantly increased compared to the control group (p=0.000). Similarly the UAC and BW are higher in intervention group than that in control (p=0.033). This means that the data were significantly different (p=0.040).

CONCLUSION

The conclusion was that moringa leaf extract has an effect on increasing HB level, UAC and BW of post-disaster pregnant women in the area of Tinggede Health Center, Sigi District. Moringa leaf extract is suggested as an alternative supplement to overcome anemia on post-disaster pregnant women.

Phytogenic Synthesis of Pd-Ag/rGO Nanostructures Using Stevia Leaf Extract for Photocatalytic H2 Production and Antibacterial Studies

Continuously increasing energy demand and growing concern about energy resources has attracted much research in the field of clean and sustainable energy sources. In this context, zero-emission fuels are required for energy production to reduce the usage of fossil fuel resources. Here, we present the synthesis of Pd-Ag-decorated reduced graphene oxide (rGO) nanostructures using a green chemical approach with stevia extract for hydrogen production and antibacterial studies under light irradiation. Moreover, bimetallic nanostructures are potentially lime lighted due to their synergetic effect in both scientific and technical aspects. Structural characteristics such as crystal structure and morphological features of the synthesized nanostructures were analyzed using X-ray diffraction and transmission electron microscopy. Analysis of elemental composition and oxidation states was carried out by X-ray photoelectron spectroscopy. Optical characteristics of the biosynthesized nanostructures were obtained by UV-Vis absorption spectroscopy, and Fourier transform infrared spectroscopy was used to investigate possible functional groups that act as reducing and capping agents. The antimicrobial activity of the biosynthesized Pd-Ag-decorated rGO nanostructures was excellent, inactivating 96% of Escherichia coli cells during experiments over 150 min under visible light irradiation. Hence, these biosynthesized Pd-Ag-decorated rGO nanostructures can be utilized for alternative nanomaterial-based drug development in the future.

Through quorum sensing, Pseudomonas aeruginosa resists noble metal-based nanomaterials toxicity

Noble metal-based nanomaterials (NMNs), such as platinum nanoparticles (Pt@NPs) and palladium nanoparticles (Pd@NPs), are increasingly being used as antibacterial agents. However, little information is available on bacterial resistance to NMNs. In this study, owing to their oxidase-like and peroxidase-like properties, both Pt@NPs and Pd@NPs induce reactive oxygen species (ROS) and manifest antibacterial activities: 6.25 μg/mL of either Pt@NPs or Pd@NPs killed >50% of Staphylococcus aureus strain ATCC29213. However, Pseudomonas aeruginosa strain PAO1 completely resisted 12.5 μg/mL of Pt@NPs and 6.25 μg/mL of Pd@NPs. Compared to the non-NMN groups, these NMNs promoted 2-3-fold upregulation of the quorum sensing (QS) gene lasR in strain PAO1. In fact, the lasR gene upregulation induced a 1.5-fold reduction in ROS production and increased biofilm formation by 11% (Pt@NPs) and 27% (Pd@NPs) in strain PAO1. The ΔlasR mutants (lasR gene knock out in strain PAO1), became sensitive to NMNs. The survival rates of ΔlasR mutants at 12.5 μg/mL Pt@NPs and Pd@NPs treatments were only 77% and 58%, respectively. This is the first report indicating that bacteria can resist NMNs through QS. Based on these results, evaluation of the ecological risks of using NMNs as antibacterial agents is necessary.

Identification of novel bioactive molecules from garlic bulbs: A special effort to determine the anticancer potential against lung cancer with targeted drugs

Garlic (Allium sativum L.), is a predominant spice, which is used as an herbal medicine and flavoring agent, since ancient times. It has a rich source of various secondary metabolites such as flavonoids, terpenoids and alkaloids, which have various pharmacological properties. Garlic is used in the treatment of various ailments such as cancer, diabetes and cardiovascular diseases. The present study aims to explore the plausible mechanisms of the selected phytocompounds as potential inhibitors against the known drug targets of non-small-cell lung cancer (NSCLC). The phytocompounds of garlic were identified by gas chromatography-mass spectrometry (GC–MS) technique. Subsequently, the identified phytocompounds were subjected to molecular docking to predict the binding with the drug targets, epidermal growth factor receptor (EGFR), human epidermal growth factor receptor 2 (HER2), echinoderm microtubule-associated protein-like 4-anaplastic lymphoma kinase (EML4-ALK) and group IIa secretory phospholipase A2 (sPLA2-IIA). Molecular dynamics is used to predict the stability of the identified phytocompounds against NSCLC drug targets by refining the intermolecular interactions formed between them. Among the 12 phytocompounds of garlic, three compounds[1,4-dimethyl-7-(1-methylethyl)-2-azulenyl]phenylmethanone, 2,4-bis(1-phenylethyl)-phenol and 4,5–2 h-oxazole-5-one,4-[3,5-di-t-butyl-4-methoxyphenyl] methylene-2-phenyl were identified as potential inhibitors, which might be suitable for targeting the different clinical forms of EGFR and dual inhibition of the studied drug targets to combat NSCLC. The result of this study suggest that these identified phytocompounds from garlic would serve as promising leads for the development of lead molecules to design new multi-targeting drugs to address the different clinical forms of NSCLC.

Palladium Nanoparticles Fabricated by Green Chemistry: Promising Chemotherapeutic, Antioxidant and Antimicrobial Agents

Palladium nanoparticles (Pd NPs) showed great potential in biomedical applications because of their unique physicochemical properties. Various conventional physical and chemical methods have been used for the synthesis of Pd NPs. However, these methods include the use of hazardous reagents and reaction conditions, which may be toxic to health and to the environment. Thus, eco-friendly, rapid, and economic approaches for the synthesis of Pd NPs have been developed. Bacteria, fungi, yeast, seaweeds, plants, and plant extracts were used to prepare Pd NPs. This review highlights the most recent studies for the biosynthesis of Pd NPs, factors controlling their synthesis, and their potential biomedical applications.

In vitro antioxidant and cytotoxic activities of polyherbal extracts from Vetiveria zizanioides, Trichosanthes cucumerina, and Mollugo cerviana on HeLa and MCF-7 cell lines

Various metabolites exist in the medicinal plants have lot of potential to cure various diseases and disorders. Plants such as, Vetiveria zizanioides, Trichosanthes cucumerina, and Mollugo cerviana were collected from Western Ghats, Tamilnadu, India. Phytochemicals were extracted from these plants using various organic solvents and tested against Gram-positive and Gram-negative bacteria. The phytochemicals such as, carbohydrate, alkaloids, steroids, saponins, flavonoids and tannin were detected from these medicinal plants. Among the extracts, methanol showed potent activity and this solvent was used to extract polyherbal medicinal plants. Methanol extract of V. zizanioides was found to be highly active against E. coli (27 ± 2 mm), P. mirabilis (19 ± 3 mm) and B. subtilis (18 ± 2 mm). Ethyl acetate extract showed high activity against E. coli (24 ± 2 mm), P. mirabilis (22 ± 3 mm) and B. subtilis (20 ± 1 mm). These three plants were taken at 1:1:1 ratio and extracted with methanol at 1:10 ratio and synergistic activity was tested against bacterial pathogens. Synergistic activity of polyherbal extract was analyzed. The extracted crude herbal medicine was found to be effective against Staphylococcus aureus, E. coli, Enterbacter sp., Pseudomonas aeruginosa, Bacillus subtilis and Proteus mirabilis. The zone of inhibition was 33 ± 3 mm, 17 ± 2 mm, 22 ± 2 mm, 40 ± 2 mm, 33 ± 1 mm and 38 ± 2 mm zone of inhibition against E. coli, S. aureus, P. aeruginosa, P. mirabilis, B. subtilis and Enterobacter sp. Polyherbal extract was found to be highly effective against P. mirabilis and Enterobacter sp. MIC values of polyherbal extract ranged from 29 ± 2.5 µg/ml to 34 ± 2.5 µg/ml. MIC value was found to be less against P. mirabilis and was high against S. aureus. Antioxidant property varied between 49 ± 3% and 95.3 ± 2%. At 20 µg/ml antioxidant activity was reported as 49 ± 3% and it was increased at higher concentrations of polyherbal extract. Two cell lines (HeLa and MCF cell lines) were selected to analyze cytotoxic activity of polyherbal extract. The methanol extract of polyherbal fraction showed cytotoxicity against these two cell lines. The LC50 value was 467 ± 2.9 µg/ml against HeLa cell line and >800 µg/ml against MCF-7 cell lines. The polyherbal extract showed antibacterial, antioxidant and anticancer activities.

Effect of traditionally used herb Pedalium murex L. and its active compound pedalitin on urease expression - For the management of kidney stone

Pedalium murex L. is a medicinal herb that has been used for the treatment of diseases related to kidney in the traditional system of medicine. The current study aims to study the effect of ethyl acetate extract of P. murex (EAEP) and its fractionated compound pedalitin against urease production and UreC gene expression in Proteus mirabilis. The selected reference strain Proteus mirabilis (MTCC 425) and the isolates culture of Proteus mirabilis were subjected to study the antibacterial efficacy of P. murex. Expression analysis of P. mirabilis urease gene was successfully done by QPCR. The ethyl acetate extract effectively inhibit the reference Proteus mirabilis and bacterial isolates of Proteus mirabilis in the clinical samples studied. EAEP has showed more potent activity (56.7%) against urease enzyme and pedalitin also exhibited potent activity (30.1%). Using qPCR, the expression of UreC gene of P. mirabilis was controlled by EAEP and also its bioactive compound pedalitin. The present study clearly demonstrated the potency of P. murex in controlling the growth of pathogenic P. mirabilis and to control the expression of urease enzyme production as well as to restrict the urease gene expression in P. mirabilis.

Evaluation of antidiabetic activity of Pleurotus pulmonarius against streptozotocin-nicotinamide induced diabetic wistar albino rats

The current research aims to evaluate the antidiabetic properties of Pleurotus pulmonarius, an edible basidiomycetes mushroom fungi in diabetic induced wistar albino rats. Mycelial Hot Water Extracts (HWE) and Acetone Extracts (AE) of Pleurotus pulmonarius was orally administrated to STZ-NA induced (55 mg/kilogram body weight) diabetic wistar albino rats at a concentration of 200 and 400 mg/kg for 4 weeks. The outcomes revealed that the HWE of Pleurotus pulmonarius resulted in a significant (p < 0.001) reduction in blood glucose level. A noteworthy (p < 0.001) reduction in serum lipid profile and elevation in High-Density Lipoprotein Cholesterol (HDL-C) after administration with HWE, also demonstrating the protective effects of HWE in diabetes-related complications. Besides all antidiabetic parameters, pathological morphology of the pancreas, liver and kidney are regularised. This observation indicated that HWE of Pleurotus pulmonarius possessed higher antidiabetic activity than AE. Besides, HWE also promoted a significant control of alpha amylase enzyme in a concentration-dependent manner with a maximum activity of 99.23% inhibition at 1000 µg/ml. The outcomes of the present study indicated that the HWE possesses a potential antidiabetic activity both in vitro and in vivo. Thus, it can be used as a nontoxic complementary drug in the controlling of diabetes and related complications, thus providing scientific authentication of its use as an antidiabetic agent.

Pd-based nanoparticles: Plant-assisted biosynthesis, characterization, mechanism, stability, catalytic and antimicrobial activities

Among various metal nanoparticles, palladium nanoparticles (Pd NPs) are one of the most important and fascinating nanomaterials. An important concern about the preparation of Pd NPs is the formation of toxic by-products, dangerous wastes and harmful pollutants. The best solution to exclude and/or minimize these toxic substances is plant mediated biosynthesis of Pd NPs. Biogenic Pd-based NPs from plant extracts have been identified as valuable nanocatalysts in various catalytic reactions because of their excellent activities and selectivity. They have captured the attention of researchers owing to their economical, sustainable, green and eco-friendly nature. This review attempts to cover the recent progresses in the fabrication, characterization and broad applications of biogenic Pd NPs in environmental and catalytic systems. In addition, the stability of biosynthesized Pd NPs and mechanism of their formation are investigated.

In-vitro antibacterial, antioxidant potentials and cytotoxic activity of the leaves of Tridax procumbens

The present study explored the phytochemicals, antibacterial, antioxidant and cytotoxic effect of Tridax procumbens leaves. The leaves were dried and extracted with various organic solvents. The leaves contained the phytochemicals such as alkaloids, carbohydrates, polyphenols and tannins respectively. Antimicrobial potentials of the extracts were determined by performing the disc diffusion techniques. Results revealed that different organic solvents extracts namely methanol, ethanol and ethyl acetate extracts documented comparatively good activity against the studied microbial strains. The methanol extract of leaves of T. procumbens showed combatively better antioxidant potential. The tested plant leaf extract showed high activity against human lung cancer cells than breast cancer cell lines. 250 µg/ml plants extract showed 84 ± 2.8% toxicity against human lung cancer cells.

Green synthesis of metallic nanoparticles as effective alternatives to treat antibiotics resistant bacterial infections: A review

•

Recent approaches for green synthesis of metallic nanoparticles were discussed.

•

The antibacterial activities of various metallic nanoparticles were mentioned.

•

The different modes and mechanisms of antibacterial property were deciphered.

Due to development of bacterial resistance to the conventional antibiotics, the treatment of bacterial infections has become a major issue of concern. The unprescribed and uncontrolled use of antibiotics has lead to the rapid development of antibiotic resistance in bacterial strains. Therefore, the development of novel and potent bactericidal agents is of great clinical importance. Interestingly, metallic nanoparticles (NPs) have been proven to be promising alternative to antibiotics. NPs interact with the important cellular organelles and biomolecules like DNA, enzymes, ribosomes, and lysosomes that can affect cell membrane permeability, oxidative stress, gene expression, protein activation, and enzyme activation. Since, NPs target multiple biomolecules concurrently; it becomes very difficult for bacteria to develop resistance against them. Currently, there are different physical and chemical methods utilized for NPs synthesis. However, most of these processes are costly and potentially hazardous for the living organisms and environment. Therefore, there is a need to develop an eco-friendly and cost-effective method of synthesis. Recently, the ‘green synthesis’ approaches are gaining a lot of attention. It is demonstrated that living organisms like bacteria, yeast, fungi, and plant cells can reduce inorganic metal ions into metal NPs by their cellular metabolites. Both the yield and stability of biogenic NPs are quite satisfactory. In the current article, we have addressed the green synthesis of various metal NPs reported till date and highlighted their different modes and mechanisms of antibacterial properties. It is highly anticipated that biogenic metallic NPs could be viable and economical alternatives for treating drug resistant bacterial infections in near future.

Photodamage on Staphylococcus aureus by natural extract from Tetragonia tetragonoides (Pall.) Kuntze: Clean method of extraction, characterization and photophysical studies

Photodynamic therapy (PDT) is a clinical modality that allows the destruction of tumor cells and microorganisms by reactive oxygen species, formed by the combination of photosensitizer (PS), molecular oxygen and adequate wavelength light. This research, through a clean methodology that involves pressurized liquids extraction (PLE), obtained a highly antimicrobial extract of Tetragonia tetragonoides, which rich in chlorophylls as photosensitizers. The Chlorophylls-based extract (Cbe-PLE) presented pharmacological safety, through the maintenance of cellular viability. In addition, Cbe-PLE showed great efficacy against Staphylococcus aureus, with severe dose-dependent damage to the cell wall of the pathogen. The obtained product has a high potential for the development of photostimulated phytotherapic formulations for clinical applications in localized infections, as a complementary therapeutic alternative to antibiotics.

A review of the antimicrobial potential of precious metal derived nanoparticle constructs

The field of nanotechnology is rapidly growing. The promise of pharmacotherapeutics emerging from this vast field has drawn the attention of many researchers. However, with the increase in the prevalence of antibiotic resistant microorganisms, the manifestations of these promises are needed now more than ever. Many have postulated the antimicrobial potential of nanoparticle constructs derived from precious metals/noble metals nanoparticles (NMNPs), such as silver nanoparticles that show activity against multidrug resistant bacteria. In this review we will evaluate the current studies and explore the data to obtain a clear picture of the potential of these particles and the validity of the claims of drug resistant treatments with NMNPs.

Synthesis and biological characterization of silver nanoparticles derived from the cyanobacterium Oscillatoria limnetica

Using aqueous cyanobacterial extracts in the synthesis of silver nanoparticle is looked as green, ecofriendly, low priced biotechnology that gives advancement over both chemical and physical methods. In the current study, an aqueous extract of Oscillatoria limnetica fresh biomass was used for the green synthesis of Ag-NPs, since O. limnetica extract plays a dual part in both reducing and stabilizing Oscillatoria-silver nanoparticles (O-AgNPs). The UV-Visible absorption spectrum, Fourier transforms infrared (FT-IR), transmission electron microscopy (TEM) and scanning electron microscope (SEM) were achieved for confirming and characterizing the biosynthesized O-AgNPs. TEM images detected the quasi-spherical Ag-NPs shape with diverse size ranged within 3.30-17.97 nm. FT-IR analysis demonstrated the presence of free amino groups in addition to sulfur containing amino acid derivatives acting as stabilizing agents as well as the presence of either sulfur or phosphorus functional groups which possibly attaches silver. In this study, synthesized Ag-NPs exhibited strong antibacterial activity against multidrug-resistant bacteria (Escherichia coli and Bacillus cereus) as well as cytotoxic effects against both human breast (MCF-7) cell line giving IC50 (6.147 µg/ml) and human colon cancer (HCT-116) cell line giving IC50 (5.369 µg/ml). Hemolytic activity of Ag-NPs was investigated and confirmed as being non- toxic to human RBCs in low concentrations.