Light emission miracle in the sea and preeminent applications of bioluminescence in recent new biotechnology

Structures and properties of α-amylase and glucoamylase immobilized by ZIF-8 via one-pot preparation

The immobilization of α-amylase and glucoamylase using a metal-organic framework (enzyme@ZIF-8) was prepared in situ through a one-pot method. The morphology, crystal structure, and molecular characteristics of the free enzyme and enzyme@ZIF-8 were characterized. The enzyme@ZIF-8 exhibited the rhombic dodecahedron morphology, with a decrease in particle size. Successful immobilization of α-amylase and glucoamylase within ZIF-8 was confirmed, with 30-40 % loading rate. The immobilization process did not significantly alter the crystal structure of ZIF-8. The changes in secondary structure of enzyme after immobilization resulted in modification of catalytic activity of enzyme. The melting enthalpy of enzyme @ZIF-8 increased with the increase of enzyme content. The melting peak temperature of the enzyme immobilized by ZIF-8 increased. The activity of free and immobilized enzymes was influenced by the different time, pH and temperature. At pH 5-8 and temperature 60-80 °C, the activity of the immobilized enzyme was significantly greater than that of the free enzyme. The repeatability of enzyme@ZIF-8 was 61.52 % after three cycles. The kinetic parameters of Michaelis-Menten model for enzymatic reaction were determined by fitting the initial rate of reactions and initial substrate concentration data. The Michaelis-Menten constant (KM) values of immobilized enzyme were lower than that of free enzyme, indicating the greater affinity between the enzyme and the substrate.

Direct Influence of the Conserved Motif in PL7 Family Alginate Lyases on Enzyme Cold Adaptability

Alginate lyase, a vital component of polysaccharide lyases, is instrumental in the efficient degradation of alginate and the production of single oligosaccharides. Although numerous alginate lyases have been characterized, only a few display extreme cold adaptability in the range of 0-20 °C. In this study, we identified a novel cold-adapted alginate lyase, Aly423, from Tamlana laminarinivorans PT2-4 isolated from Sargassum. Phylogenetic classification, enzyme structure, and catalytic property analyses confirmed that Aly423 could be classified as a member of subfamily 5 of the PL7 family and exhibited significant cold adaptability at low temperatures. Further analysis of the secondary structure and homology modeling of several cold-adapted enzymes revealed two variable amino acid sites in the conserved amino acid motif (YFK*G*Y) of Aly423, which may affect the cold adaptation mechanism. Point mutation experiments demonstrated that mutant A304T significantly altered the temperature adaptation of Aly423, highlighting the critical role of this amino acid site in the cold-adaptation mechanism of the enzyme. In summary, we effectively enhanced the enzymatic activity of the PL7 alginate cold-adapted enzyme through a rational design using computational methods. This advancement is of significant importance for the efficient utilization of sodium alginate in the food, agricultural, and pharmaceutical industries under low-temperature conditions.

Development of light-emitting Episcia lilacina leaf by applying Vibrio campbellii RMT1 and extending the glowing by CaCl2 and yeast extract

Glowing Episcia lilacina was generated through foliar application of the bioluminescent bacterium Vibrio campbellii RMT1. Firstly, different nutrient formulas were tested, incorporating yeast extract and various inorganic salts, such as CaCl2, MgCl2, MgSO4, KH2PO4, K2HPO4, and NaCl, in order to enhance bacterial growth and light emission. The combination of 0.15% of yeast extract and 0.3% of CaCl2 in a nutrient broth (NB) + 1% NaCl medium extended light emission to 24 h and resulted in higher light intensity compared to other combinations of yeast extract and inorganic salts. The peak intensity reached approximately 1.26 × 108 relative light units (RLU) at 7 h. The optimal presence of inorganic salt ions likely contributed to enhanced light emission, while the yeast extract acted as a nutrient source. Secondly, the effect of proline on salt-induced stress symptoms was investigated by applying 20 mM proline to the glowing plant. Additionally, a 0.5% agar nutrient was spread on the leaves prior to bacteria application to support bacterial growth and penetration. Exogenous proline application led to a significant accumulation of proline in plant cells, resulting in decreased malondialdehyde (MDA) levels. However, the proline accumulation also reduced the light intensity of the bioluminescent bacteria. This study demonstrates the potential for generating light on a living plant using bioluminescent bacteria. Further understanding of the interaction between plants and light-emitting bacteria could contribute to the development of sustainably light-emitting plants.

Comparing the effectiveness of curcumin and papain in wound dresses based on chitosan nanoparticle

In this study, chitosan/curcumin (CS/Cur) and chitosan/papain (CS/Pa) nanoparticles were prepared and then characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), and differential light scattering (DLS). Subsequently, release rate, porosity, swelling, degradability, anti-inflammatory, antioxidant, antibacterial, and cell viability tests were conducted to investigate and compare the healing potential of the nanoparticles for various types of wounds. The results of FTIR, XRD, and DLS indicated that the nanoparticles were manufactured correctly with a hydrodynamic diameter of 429 nm (CS/Cur) and 460 nm (CS/Pa), and zeta potential of 4.32 mV (CS/Cur) and 7.57 mV (CS/Pa). The release rate results indicated a higher release rate in a basic environment (pH 8.4) for curcumin, a higher release rate for papain in an acidic environment (pH 6.4), and the Korsmeyer-Peppas model for the release of curcumin and papain. The results indicated that CS/Cur with 41.6% antioxidant activity, high antibacterial effect, and cell growth up to 616% during 7 days, was more effective than CS/Pa. In comparison, CS/Pa (with a porosity of 70.5% and a swelling rate of 1392%) was more advantageous than CS/Cur in terms of porosity and swelling. In addition, CS/Cur was as effective as CS/Pa in terms of degradation and anti-inflammatory properties. In conclusion, the outcomes represented that the CS/Cur and CS/Pa nanoparticles improved wound healing, and each was suitable for specific wounds and wound healing stages.

Transcriptomic Analysis Provides New Insights into the Tolerance Mechanisms of Green Macroalgae Ulva prolifera to High Temperature and Light Stress

Our research focused on understanding the genetic mechanisms that contribute to the tolerance of Ulva prolifera (Chlorophyta), a marine macroalgae, to the combined stress of high temperature and high light intensity. At the mRNA level, the up-regulated DEGs showed enrichment in pathways related to ribosomes, proteasomes, and peroxisomes. The spliceosome pathway genes were found to be vital for U. prolifera's ability to adapt to various challenging situations in all the comparison groups. In response to elevated temperature and light intensity stress, there was a significant increase in genes and pathways related to ribosomes, proteasomes, and peroxisomes, whereas autophagy showed an increase in response to stress after 24 h, but not after 48 h. These findings provide novel insights into how U. prolifera adapts to elevated temperature and light stress.

Recent advances in the development and applications of luminescent bacteria-based biosensors

Luminescent bacteria-based biosensors are widely used for fast and sensitive monitoring of food safety, water quality, and other environmental pollutions. Recent advancements in biomedical engineering technology have led to improved portability, integration, and intelligence of these biotoxicity assays. Moreover, genetic engineering has played a significant role in the development of recombinant luminescent bacterial biosensors, enhancing both detection accuracy and sensitivity. This review provides an overview of recent advances in the development and applications of novel luminescent bacteria-based biosensors, and future perspectives and challenges in the cutting-edge research, market translation, and practical applications of luminescent bacterial biosensing are discussed.

An emphatic study on the luciferin-luciferase bioluminescence system of Benthosema pterotum

Approximately 80% of luminous organisms live in the oceans, and considerable diversity of life dependence on bioluminescence has been observed in marine organisms. Among vertebrates, luminous fish species are the only group of vertebrates that have the ability to emit bioluminescent light. Meanwhile, the lantern fish family (Myctophidae), with 33 genera all of which have the ability to emit light, is considered the most prominent family among the luminous fish of the deep oceans and seas. Lantern fish Benthosema pterotum has bioluminescence properties due to the presence of photophores scattered in its ventral-lateral region. However, no research has been performed on its bioluminescence system and light emission mechanism. The present research aimed to assess the type of bioluminescence, pigment, photoprotein, or luciferin-luciferase system in B. pterotum. In order to determine the type of light-emitting system in B. pterotum species, several specific experiments were designed and performed. It was shown that the light emission system in B. pterotum species is categorized into the luciferin-luciferase type. Conducting this research was not only innovative, but it also could be the beginning of further research in the field of marine biochemistry and production of the recombinant active forms of enzymes for industrial, commercial, medical, and pharmaceutical purposes.

Advancing Luciferase-Based Antibody Immunoassays to Next-Generation Mix and Read Testing

Antibody measurements play a central role in the diagnosis of many autoimmune and infectious diseases. One antibody detection technology, Luciferase Immunoprecipitation Systems (LIPS), utilizes genetically encoded recombinant luciferase antigen fusion proteins in an immunoglobulin capture format to generate robust antibody measurement with high diagnostic sensitivity and specificity. The LIPS technology has been highly useful in detecting antibodies for research diagnostics and the discovery of new autoantigens. The methodology of the assay requires immunoglobulin binding reagents such as protein A/G beads and washing steps to process the immune complex before antibody levels are measured by light production with a luminometer. Recently, simplified mix and read immunoassays based on split components of the nanoluciferase enzyme in a complementation format have been developed for antibody measurements without requiring immunoglobulin-capturing beads or washing steps. The mix and read immunoassays utilize two or three nanoluciferase fragments which when reconstituted via antigen-specific antibody binding generate a functional enzyme. At present, these split luciferase tests have been developed mainly for detecting SARS-CoV-2 antibodies. Here, we describe the traditional LIPS technology and compare it to the new split luciferase methodologies focusing on their technical features, strengths, limitations, and future opportunities for diagnostic research, and clinical applications.

Application of the Luminescent luxCDABE Gene for the Rapid Screening of Antibacterial Substances Targeting Pseudomonas aeruginosa

Pseudomonas aeruginosa (P. aeruginosa) is a typical Gram-negative bacterium that can cause the spoilage of catered food products. Using a luminescent reporter gene (luxCDABE), this study sought to construct a cell-based biosensor (PAO1-CE) to rapidly screen antibacterial substances against P. aeruginosa. A total of six antibiotics belonging to five categories were used as the model test substances. The results of the bioluminescence detection method were verified using traditional antibacterial research assessments. The correlation coefficient of the regression equation fitting the data generated using this method was greater than 0.98, supporting the credibility of this approach. Additionally, the EC₅₀ of each of the antibiotics assessed in this study was lower than the 1/2 MIC determined by conventional means. All six of the antibiotics caused varying degrees of damage to the cell membrane and cell wall of P. aeruginosa. Importantly, this novel method helped shorten the time necessary for active-compound detection and could be used for high-throughput detection, which would also help improve the detection efficiency. The application of this method towards the discovery of novel antibacterial compounds targeting P. aeruginosa holds substantial promise for greatly improving the efficiency of compound discovery.

Bioluminescent Dinoflagellates as a Bioassay for Toxicity Assessment

Dinoflagellates bioluminescence mechanism depends upon a luciferin–luciferase reaction that promotes blue light emission (480 nm) in specialized luminogenic organelles called scintillons. The scintillons contain luciferin, luciferase and, in some cases, a luciferin-binding protein (LBP), which prevents luciferin from non-enzymatic oxidation in vivo. Even though dinoflagellate bioluminescence has been studied since the 1950s, there is still a lack of mechanistic understanding on whether the light emission process involves a peroxidic intermediate or not. Still, bioassays employing luminous dinoflagellates, usually from Gonyaulax or Pyrocystis genus, can be used to assess the toxicity of metals or organic compounds. In these dinoflagellates, the response to toxicity is observed as a change in luminescence, which is linked to cellular respiration. As a result, these changes can be used to calculate a percentage of light inhibition that correlates directly with toxicity. This current approach, which lies in between fast bacterial assays and more complex toxicity tests involving vertebrates and invertebrates, can provide a valuable tool for detecting certain pollutants, e.g., metals, in marine sediment and seawater. Thus, the present review focuses on how the dinoflagellates bioluminescence can be applied to evaluate the risks caused by contaminants in the marine environment.

Validation of a Standard Luminescence Method for the Fast Determination of the Antimicrobial Activity of Nanoparticles in Escherichia coli

The use of nanoparticles in multiple industries has raised concerned voices about the assessment of their toxicity/antimicrobial activity and the development of standardized handling protocols. Issues emerge during the antimicrobial assaying of multiple cargo, colorimetric, colloidal nanoformulations, as standard protocols often rely on visual evaluations, or optical density (OD) measurements, leading to high variance inhibitory concentrations (MIC). Thus, a fast, luminescence-based assay for the effective assessment of the antimicrobial activity of nanoparticles is herein reported, using the bioluminescence of an in-house E. coli ATCC® 8739TM construct with the pMV306G13 + Lux plasmid (E. coli Lux). The new strain's sensitivity to ofloxacin as a standard antibiotic was confirmed, and the methodology robustness verified against multiple nanoparticles and colorimetric drugs. The reduction of incubation from 24 to only 8 h, and the sole use of luminescence (LUX490) to accurately determine and distinguish MIC50 and MIC90, are two main advantages of the method. By discarding OD measurements, one can avoid turbidity and color interferences when calculating bacterial growth. This approach is an important tool that contributes to the standardization of methods, reducing samples' background interference and focusing on luminescence as a direct probe for bacterial metabolic activity, growth and, most importantly, the correct assessment of nanomaterials' antimicrobial activity.

Miniaturization of Bright Light-Emitting Luciferase ALuc: picALuc

Luciferases are widely used as sensitive reporters in various fields ranging from basic biology to medical diagnosis, public health, and food inspection. Scientists have isolated novel luciferases from bioluminescent organisms and concentrated on improving their brightness and thermostability. Recently, small bright luciferases such as artificial luciferase (ALuc) (21 kDa), NanoLuc (19 kDa), GLuc (18 kDa), and TurboLuc (16 kDa) have been reported. However, smaller, brighter, and more stable luciferases are desired for further applications. Here, we constructed the smallest and bright mutant of ALuc, named "picALuc" (13 kDa). picALuc retained the luminescence activity of the full-length ALuc; moreover, its brightness and thermostability were at the same levels as NanoLuc. Furthermore, we showed the advantage of picALuc for the bioluminescence resonance energy transfer-based assay due to its smallness. Our development has opened the door for wider and more practical applications of luciferases.

Emerging trends in environmental and industrial applications of marine carbonic anhydrase: a review

Biocatalytic conversion of greenhouse gases such as carbon dioxide into commercial products is one of the promising key approaches to solve the problem of climate change. Microbial enzymes, including carbonic anhydrase, NAD-dependent formate dehydrogenase, ribulose bisphosphate carboxylase, and methane monooxygenase, have been exploited to convert atmospheric gases into industrial products. Carbonic anhydrases are Zn2+-dependent metalloenzymes that catalyze the reversible conversion of CO2 into bicarbonate. They are widespread in bacteria, algae, plants, and higher organisms. In higher organisms, they regulate the physiological pH and contribute to CO2 transport in the blood. In plants, algae, and photosynthetic bacteria carbonic anhydrases are involved in photosynthesis. Converting CO2 into bicarbonate by carbonic anhydrases can solidify gaseous CO2, thereby reducing global warming due to the burning of fossil fuels. This review discusses the three-dimensional structures of carbonic anhydrases, their physiological role in marine life, their catalytic mechanism, the types of inhibitors, and their medicine and industry applications.

Similarities and Differences in Quorum Sensing-Controlled Bioluminescence between Photobacterium phosphoreum T3 and Vibrio qinghaiensis sp.-Q67

Quorum sensing is a density-dependent mechanism using chemical signal molecules termed autoinducers to regulate diverse biological processes in bacteria, including bioluminescence. However, the correlation between growth and light emission of two typical luminescent bacteria, Photobacterium phosphoreum T3 and Vibrio qinghaiensis sp.-Q67, is still unclear. This study investigates the variations of bioluminescence and the light-emission-involved gene expression of the above two strains, respectively, showing that bioluminescence is population density-dependent. Furthermore, the effect of crude extracts (175, 350, 700 and 1750 mg/L) from the bacterial culture that contains the potential autoinducers on the bioluminescence is explored. At the exponential and the early stationary growth phase, T3 did not exhibit an obvious light intensity and cell density change after adding crude extracts at 175 and 350 mg/L, while the light intensity decreased at 700 and 1750 mg/L, showing a luminescence inhibition. For Q67, the light intensity increased dramatically with crude extract concentration. These results suggest that the bioluminescence process of both T3 and Q67 is controlled by quorum sensing. Furthermore, the different response modes of these two strains to autoinducers imply that the two strains could be applied to different compounds for toxicity assesses.

Constructing firefly luciferin bioluminescence probes for in vivo imaging

Bioluminescence imaging (BLI) is a widely applied visual approach for real-time detecting many physiological and pathological processes in a variety of biological systems. Based on the caging strategy, lots of bioluminescent probes have been well developed. While the targets react with recognizable groups, caged luciferins liberate luciferase substrates, which react with luciferase generating a bioluminescent response. Among the various bioluminescent systems, the most widely utilized bioluminescent system is the firefly luciferin system. The H and carboxylic acid of luciferin are critically caged sites. The introduced self-immolative linker extends the applications of probes. Firefly luciferin system probes have been successfully applied for analyzing physiological processes, monitoring the environment, diagnosing diseases, screening candidate drugs, and evaluating the therapeutic effect. Here, we systematically review the general design strategies of firefly luciferin bioluminescence probes and their applications. Bioluminescence probes provide a new approach for facilitating investigation in a diverse range of fields. It inspires us to explore more robust light emission luciferin and novel design strategies to develop bioluminescent probes.

Bioluminescent Models to Evaluate the Efficiency of Light-Based Antibacterial Approaches

The emergence of microbial resistance to antimicrobials among several common pathogenic microbial strains is an increasing problem worldwide. Thus, it is urgent to develop not only new antimicrobial therapeutics to fight microbial infections, but also new effective, rapid, and inexpensive methods to monitor the efficacy of these new therapeutics. Antimicrobial photodynamic therapy (aPDT) and antimicrobial blue light (aBL) therapy are receiving considerable attention for their antimicrobial potential and represent realistic alternatives to antibiotics. To monitor the photoinactivation process provided by aPDT and aBL, faster and more effective methods are required instead of laborious conventional plating and overnight incubation procedures. Bioluminescent microbial models are very interesting in this context. Light emission from bioluminescent microorganisms is a highly sensitive indication of their metabolic activity and can be used to monitor, in real time, the effects of antimicrobial agents and therapeutics. This chapter reviews the efforts of the scientific community concerning the development of in vitro, ex vivo, and in vivo bioluminescent bacterial models and their potential to evaluate the efficiency of aPDT and aBL in the inactivation of bacteria.

A Miniaturized Microbe-Silicon-Chip Based on Bioluminescent Engineered Escherichia coli for the Evaluation of Water Quality and Safety

Conventional high throughput methods assaying the chemical state of water and the risk of heavy metal accumulation share common constraints of long and expensive analytical procedures and dedicated laboratories due to the typical bulky instrumentation. To overcome these limitations, a miniaturized optical system for the detection and quantification of inorganic mercury (Hg²⁺) in water was developed. Combining the bioactivity of a light-emitting mercury-specific engineered Escherichia coli—used as sensing element—with the optical performance of small size and inexpensive Silicon Photomultiplier (SiPM)—used as detector—the system is able to detect mercury in low volumes of water down to the concentration of 1 µg L⁻¹, which is the tolerance value indicated by the World Health Organization (WHO), providing a highly sensitive and miniaturized tool for in situ water quality analysis.

iBLP: An XGBoost-Based Predictor for Identifying Bioluminescent Proteins

Bioluminescent proteins (BLPs) are a class of proteins that widely distributed in many living organisms with various mechanisms of light emission including bioluminescence and chemiluminescence from luminous organisms. Bioluminescence has been commonly used in various analytical research methods of cellular processes, such as gene expression analysis, drug discovery, cellular imaging, and toxicity determination. However, the identification of bioluminescent proteins is challenging as they share poor sequence similarities among them. In this paper, we briefly reviewed the development of the computational identification of BLPs and subsequently proposed a novel predicting framework for identifying BLPs based on eXtreme gradient boosting algorithm (XGBoost) and using sequence-derived features. To train the models, we collected BLP data from bacteria, eukaryote, and archaea. Then, for getting more effective prediction models, we examined the performances of different feature extraction methods and their combinations as well as classification algorithms. Finally, based on the optimal model, a novel predictor named iBLP was constructed to identify BLPs. The robustness of iBLP has been proved by experiments on training and independent datasets. Comparison with other published method further demonstrated that the proposed method is powerful and could provide good performance for BLP identification. The webserver and software package for BLP identification are freely available at http://lin-group.cn/server/iBLP.

Recent achievements of bioluminescence imaging based on firefly luciferin-luciferase system

Bioluminescence imaging (BLI) is a newly developed noninvasive visual approach which facilitates the understanding of a plethora of biological processes in vitro and in vivo due to the high sensitivity, resolution and selectivity, low background signal, and the lack of external light excitation. BLI based on firefly luciferin-luciferase system has been widely used for the activity evaluation of tumor-specific enzymes, for the detection of diseases-related bioactive small molecules and metal ions, and for the diagnosis and therapy of diseases including the studies of drug transport, the research of immune response, and the evaluation of drug potency and tissue distribution. In this review, we highlight the recent achievements in luciferin derivatives with red-shifted emission spectra, mutant luciferase-luciferin pairs, and the diagnostic and therapeutic application of BLI based on firefly luciferin-luciferase system. The development and application of BLI will expand our knowledge of the occurrence and development of diseases and shed light on the diagnosis and treatment of various diseases.

Mathematical Modeling Approaches for Assessing the Joint Toxicity of Chemical Mixtures Based on Luminescent Bacteria: A Systematic Review

Developments in industrial applications inevitably accelerate the discharge of enormous substances into the environment, whereas multi-component mixtures commonly cause joint toxicity which is distinct from the simple sum of independent effect. Thus, ecotoxicological assessment, by luminescent bioassays has recently brought increasing attention to overcome the environmental risks. Based on the above viewpoint, this review included a brief introduction to the occurrence and characteristics of toxic bioassay based on the luminescent bacteria. In order to assess the environmental risk of mixtures, a series of models for the prediction of the joint effect of multi-component mixtures have been summarized and discussed in-depth. Among them, Quantitative Structure-Activity Relationship (QSAR) method which was widely applied in silico has been described in detail. Furthermore, the reported potential mechanisms of joint toxicity on the luminescent bacteria were also overviewed, including the Trojan-horse type mechanism, funnel hypothesis, and fishing hypothesis. The future perspectives toward the development and application of toxicity assessment based on luminescent bacteria were proposed.

Recent Development of Computational Predicting Bioluminescent Proteins

Bioluminescent Proteins (BLPs) are widely distributed in many living organisms that act as a key role of light emission in bioluminescence. Bioluminescence serves various functions in finding food and protecting the organisms from predators. With the routine biotechnological application of bioluminescence, it is recognized to be essential for many medical, commercial and other general technological advances. Therefore, the prediction and characterization of BLPs are significant and can help to explore more secrets about bioluminescence and promote the development of application of bioluminescence. Since the experimental methods are money and time-consuming for BLPs identification, bioinformatics tools have played important role in fast and accurate prediction of BLPs by combining their sequences information with machine learning methods. In this review, we summarized and compared the application of machine learning methods in the prediction of BLPs from different aspects. We wish that this review will provide insights and inspirations for researches on BLPs.

The Marine Bacterium Shewanella woodyi Produces C8-HSL to Regulate Bioluminescence

Quorum sensing (QS), a cell-to-cell communication system involved in the synchronization of bacterial behavior in a cell-density-dependent manner has been shown to control phenotypes such as luminescence, virulence, and biofilm formation. The marine strain, Shewanella woodyi MS32 has been identified as a luminous bacterium. Very little information is known on this bacterium, in particular if its luminescence and biofilm formation are controlled by QS. In this study, we have demonstrated that S. woodyi MS32 emits luminescence in planktonic and sessile conditions. The putative QS regulatory genes homologous to luxI and luxR identified in the S. woodyi MS32 genome, named swoI and swoR, are divergently transcribed and are not genetically linked to the lux operon in contrast with its closest parent Shewanella hanedai and with Aliivibrio fischeri. Interestingly, the phylogenetic analysis based on the SwoI and SwoR sequences shows that a separate horizontal gene transfer (HGT) occurred for the regulatory genes and for the lux operon. Functional analyses demonstrate that the swoI and swoR mutants were non-luminescent. Expression of lux genes was impaired in the QS regulatory mutants. N-octanoyl-L-homoserine lactone (C₈-HSL) identified using liquid chromatography mass spectrometry in the wild-type strain (but not in ΔswoI) can induce S. woodyi luminescence. No significant difference has been detected between the wild-type and mutants on adhesion and biofilm formation in the conditions tested. Therefore, we have demonstrated that the luxCDABEG genes of S. woodyi MS32 are involved in luminescence emission and that the swoR/swoI genes, originated from a separate HGT, regulate luminescence through C₈-HSL production.

Characteristics of the Copper,Zinc Superoxide Dismutase of a Hadal Sea Cucumber (Paelopatides sp.) from the Mariana Trench

Superoxide dismutases (SODs) are among the most important antioxidant enzymes and show great potential in preventing adverse effects during therapeutic trials. In the present study, cloning, expression, and characterization of a novel Cu,Zn superoxide dismutase (Ps-Cu,Zn-SOD) from a hadal sea cucumber (Paelopatides sp.) were reported. Phylogenetic analysis showed that Ps-Cu,Zn-SOD belonged to a class of intracellular SOD. Its Km and Vmax were 0.0258 ± 0.0048 mM and 925.1816 ± 28.0430 units/mg, respectively. The low Km value of this enzyme represents a high substrate affinity and can adapt to the low metabolic rate of deep sea organisms. The enzyme functioned from 0 °C to 80 °C with an optimal temperature of 40 °C. Moreover, the enzyme activity was maintained up to 87.12% at 5 °C. The enzyme was active at pH 4 to 12 with an optimal pH of 8.5. Furthermore, Ps-Cu,Zn-SOD tolerated high concentration of urea and GuHCl, resisted hydrolysis by proteases, and maintained stability at high pressure. All these features demonstrated that the deep sea Ps-Cu,Zn-SOD is a potential candidate for application to the biopharmaceutical field.

The emerging use of bioluminescence in medical research

Bioluminescence is the light produced by a living organism and is commonly emitted by sea life with Ca²⁺-regulated photoproteins being the most responsible for bioluminescence emission. Marine coelenterates provide important functions involved in essential purposes such as defense, feeding, and breeding. In this review, the main characteristics of marine photoproteins including aequorin, clytin, obelin, berovin, pholasin and symplectin from different marine organisms will be discussed. We will focused on the recent use of recombinant photoproteins in different biomedical research fields including the measurement of Ca²⁺ in different intracellular compartments of animal cells, as labels in the design and development of binding assays. This review will also outline how bioluminescent photoproteins have been used in a plethora of analytical methods including ultra-sensitive assays and in vivo imaging of cellular processes. Due to their unique properties including elective intracellular distribution, wide dynamic range, high signal-to-noise ratio and low Ca²⁺-buffering effect, recombinant photoproteins represent a promising future analytical tool in several in vitro and in vivo experiments.

Penaeus vannamei protease activating mechanism of sulfhydryl reducing compounds

For the very first time, protease enzyme from Penaeus vannamei was investigated for its activation with thiol reductant compounds. The mechanism by which sulfhydryl reductant compounds enhances the activity of P. vannamei protease still remains unclear. In this study, it was discovered that thiol-reactive compounds increase P. vannamei protease activity by a factor of about 4 with increasing V_max and decreasing Km parameters. Moreover, the reaction is an S_N2-type that does not require the initial binding of the thiol group of these compounds to the enzyme. Additionally, k₂ increased appreciably with increasing concentration of sulfhydryl reductant compounds. The linearity of this plot indicates that k₁ is unaffected by the addition of thiol compounds. Hence, the observed effect of thiol compounds on K_m seems to be due to an increase in k₂. These results suggest that the activation mechanism of P. vannamei protease almost certainly takes place by an S_N2 reaction mechanism.

Marine microbial L-asparaginase: Biochemistry, molecular approaches and applications in tumor therapy and in food industry

The marine environment is a rich source of biological and chemical diversity. It covers more than 70% of the Earth's surface and features a wide diversity of habitats, often displaying extreme conditions, where marine organisms thrive, offering a vast pool for microorganisms and enzymes. Given the dissimilarity between marine and terrestrial habitats, enzymes and microorganisms, either novel or with different and appealing features as compared to terrestrial counterparts, may be identified and isolated. L-asparaginase (E.C. 3.5.1.1), is among the relevant enzymes that can be obtained from marine sources. This amidohydrolase acts on L-asparagine and produce L-aspartate and ammonia, accordingly it has an acknowledged chemotherapeutic application, namely in acute lymphoblastic leukemia. Moreover, L-asparaginase is also of interest in the food industry as it prevents acrylamide formation. Terrestrial organisms have been largely tapped for L-asparaginases, but most failed to comply with criteria for practical applications, whereas marine sources have only been marginally screened. This work provides an overview on the relevant features of this enzyme and the framework for its application, with a clear emphasis on the use of L-asparaginase from marine sources. The review envisages to highlight the unique properties of marine L-asparaginases that could make them good candidates for medical applications and industries, especially in food safety.

Penaeus vannamei protease stabilizing process of ZnS nanoparticles

The protease enzyme purified from the Penaeus vannamei shrimp has unique properties, so improving the stability of this enzyme can improve their practical applications. In this study, ZnS nanoparticles, which have special properties for enzyme immobilization, were synthesized using a chemical precipitation method, and Penaeus vannamei protease was successfully immobilized on them. The size, structure, and morphology of the ZnS nanoparticles, and the immobilization of the protease were studied, using Transmission Electron Microscopy (TEM), Fourier Transform Infrared (FT-IR) spectroscopy, UV-Vis spectroscopy and Dynamic Light Scattering (DLS) analysis. We show that the immobilized enzyme has improved functionality at high temperatures, extreme pH conditions (pH3 and 12), and during storage. Immobilization increased the optimum temperature range of the enzyme, but did not change the pH optimum, which remained at pH7. Immobilization of P. vannamei protease enzyme increased the K_m and decreased k_cat/K_m. These results indicate that P. vannamei protease immobilized on ZnS nanoparticles, has improved properties due to its high stability and unique properties, can be used for biotechnology applications.