Transformational and passive leadership as cross-level moderators of the relationships between safety knowledge, safety motivation, and safety participation

The association between workplace physical environment and nurses' safety compliance: A serial mediation of psychological and behavioral factors

Aim

This study describes Jordanian intensive care unit nurses' satisfaction with their physical environment and investigates the association between workplace physical environment and nurses' safety compliance. Additionally, the study offers serial mediation analyses of psychological and behavioral factors between satisfaction with the workplace physical environment and nurses' safety compliance.

Introduction

Compliance with safety measures is a vital indicator of safety performance, as less compliance directly reflects undesirable safety outcomes among nurses, like occupational accidents, injuries, and fatalities. Social cognitive theory and the safety triad model contribute to understanding safety compliance behaviors to safety procedures. Thus, enhancing safety compliance in healthcare organizations remains a challenge and concern.

Methods

A quantitative research method was used based on cross-sectional and descriptive data from eight governmental hospitals in Jordan. The population included all intensive care unit nurses in the Ministry of Health's hospitals (n = 1104). A cluster sampling technique selected 285 nurses to participate. Empirical results were obtained through structural equation modeling (i.e., Smart PLS-SEM), which has become popular in this kind of research.

Results

The mean of Jordanian ICU nurses' satisfaction with the workplace physical environment was 3.36, which is moderate. Although the Smart PLS findings did not support the direct association between the workplace physical environment and nurses' safety compliance, serial mediation of safety participation in the workplace physical environment and nurses' safety compliance and perceived safety management commitment confirm the indirect association in the study model.

Conclusion

This study fills a gap in available safety and nursing literature, especially when considering the scarce studies that investigated the physical elements in the workplace and both safety compliance and safety participation. The findings are valuable for academicians, health providers, and policymakers and may trigger creative ideas and interventional solutions to improve nurses' safety compliance in healthcare organizations.

Assessing the effects of safety leadership, employee engagement, and psychological safety on safety performance

INTRODUCTION

The study assessed the impact mechanisms of employee engagement and psychological safety in safety leadership and safety performance relationships.

METHOD

We collected 539 valid responses from contract miners using a multi-wave survey research design. We analyzed the data quantitatively using the structural equation model (SEM) and hierarchical regression analysis (HRA) in AMOS and SPSS version 26 software. We used SEM to examine our proposed framework's main and structural mediation effects. HRA was used to test the moderation effect of our framework.

RESULTS

From the SEM results of our study, safety leadership significantly and positively influenced all two dimensions of safety performance-safety compliance and safety participation -- and all three dimensions of employee engagement-vigor, dedication, and absorption. Also, vigor, dedication, and absorption partially mediated the relationship between safety leadership and safety compliance, but fully mediated the safety leadership-safety participation relationship. From the HRA results, psychological safety significantly moderated two employee engagement variables (thus, vigor and dedication) and safety compliance. Also, it moderated all three variables of employee engagement (vigor, dedication, and absorption) and safety participation.

PRACTICAL APPLICATIONS

This current study highlights the importance of examining safety leadership on specific job performance, such as safety performance. It also highlights the necessity of having psychological safety and enhancing employee engagement in the mines.

The influence of safety leadership on nurses' safety behavior: The mediating role of safety knowledge and motivation

INTRODUCTION

This paper investigates the relationships among safety leadership, safety motivation, safety knowledge, and safety behavior in the setting of a tertiary hospital in Klang Valley, Malaysia.

METHOD

Underpinned by the self-efficacy theory, we argue that high-quality safety leadership enhances nurses' safety knowledge and motivation and subsequently, improves their safety behavior (safety compliance and safety participation). A total of 332 questionnaire responses were gathered and analyzed using SmartPLS Version 3.2.9, revealing the direct effect of safety leadership on both safety knowledge and safety motivation.

RESULTS

Safety knowledge and safety motivation were found to directly and significantly predict nurses' safety behavior. Notably, safety knowledge and safety motivation were established as important mediators in the relationship between safety leadership and nurses' safety compliance and participation.

PRACTICAL APPLICATIONS

The findings of this study offer key guidance for safety researchers and hospital practitioners in identifying mechanisms to enhance safety behavior among nurses.

Reconciling general transformational leadership and safety-specific transformational leadership: A paradox perspective

INTRODUCTION

Research exploring the relationship between transformational leadership and safety has used transformational leadership in context-free (e.g., "general transformational leadership," or GTL) and context-specific forms (e.g., "safety-specific transformational leadership," or SSTL), assuming these constructs are theoretically and empirically equivalent. In this paper, a paradox theory is drawn on (Schad, Lewis, Raisch, & Smith, 2016; Smith & Lewis, 2011) to reconcile the relationship between these two forms of transformational leadership and safety.

METHOD

This is done by: (a) investigating whether GTL and SSTL are empirically distinguishable; (b) testing the relative importance of GTL and SSTL in explaining variance in context-free work outcomes (i.e., in-role performance, organizational citizenship behaviors) and context-specific (i.e., safety compliance, safety participation); and (c) examining the extent to which perceived safety concern in the work environment renders GTL and SSTL distinguishable.

RESULTS

Two studies (one cross-sectional, one short-term longitudinal) show that GTL and SSTL are psychometrically distinct albeit highly correlated. Furthermore, SSTL explained statistically more variance than GTL in both safety participation and organizational citizenship behaviors, whereas GTL explained more variance in in-role performance than did SSTL. However, GTL and SSTL were only distinguishable in low-concern contexts but not high-concern contexts.

CONCLUSIONS AND PRACTICAL APPLICATIONS

These findings challenge the "either-or" (vs "both-and") approach to considering safety and performance, cautioning researchers to consider nuanced differences in context-free and context-specific forms of leadership and to avoid further proliferation of often redundant context-specific operationalizations of leadership.

The relationship among safety leadership, risk perception, safety culture, and safety performance: Military volunteer soldiers as a case study

Safety is fundamental to any organization; if not based on safety, organizational decision-making and management would be meaningless. For a country, soldiers are responsible for national security; they serve as a barrier that defends a country against external invasive forces, thus assuming great missions and responsibilities on their shoulders. To ensure soldiers fulfill their duties of protecting the country and the people, they should gain clear risk perception, which should be instilled into them during their daily combat readiness training. Only when their performances meet safety criteria can they become a strong fighting force. This study recruited military volunteer soldiers as its research participants and employed convenience sampling to distribute questionnaires. In total, this research collected 725 valid copies, of which the data were used to explore the relationship among safety leadership, risk perception, safety culture, and safety performance. To achieve this goal, this study proposed some research hypotheses based on literature review. The hypotheses were all verified via latent variable modeling and multiple hierarchical regression analysis after the reliability and validity of each construct had been tested via confirmatory factor analysis. The research results showed that the more deeply military volunteer soldiers sense safety leadership, the clearer their risk perception will be and the more helpful it would be in achieving safety performance. It is worth mentioning that risk perception can serve as a mediator while safety culture can mediate the relationship between safety leadership and safety performance. Lastly, the research proposes suggestions in the section of conclusions, which provides reference to the combat readiness training and daily tasks of soldiers.

Influencing mechanism of coal miners' safety compliance: A chain mediating model

The influence that job insecurity has on employees' safety psychology and behavior has been identified in many empirical studies, but few of these examine the influencing mechanism of job insecurity on coal miners' safety behaviors. In the de-overcapacity circumstances of coal production in China, using the strength model of self-control and conservation of resources theories, a chain mediating model was constructed to determine the relationships between job insecurity, emotional exhaustion, mind wandering, and safety compliance among coal miners. Data were collected from 447 coal miners working in three coal mines of Henan Pingdingshan Coal Industry Group. It was found that job insecurity negatively affected safety compliance, and emotional exhaustion and mind wandering played a chain mediating effect in the relationship between job insecurity and miners' safety compliance, along three specific paths. This study helps advance the understanding of the internal mechanisms of coal miners' job insecurity and how this affects individual safety performance. It also provides empirical evidence that managers can use effectively intervene in coal miners' safety performance.

Transformational leaders’ approach to overcapacity: A study in correctional institutions

This research attempts to examine the effect of transformational leadership (TL) on job satisfaction (JS) and job performance (JP) mediated by leader-member exchange (LMX) at all correctional officers in West Java. The quantitative method is adopted by conducting a questionnaire survey on all officers in the West Java area, with a total of 215 respondents. The questionnaire was done through the Google Forms platform and distributed in a time-lagged method. The sample of respondents who were interviewed was obtained through a purposive sampling technique, namely taking samples with certain considerations. The data in this study was then analyzed using Structural Equation Modeling (SEM), which was assisted by the AMOS program. The findings revealed that TL has a large impact on JS, JP, and LMX, whereas LMX has a significant impact on JS and JP. This study contributes to the literature by linking TL, LMX, JS, and JP. It examines and analyzes how and why TL and LMX can affect JS and JP.

The Mediating Role of Safety Climate in the Relationship between Transformational Safety Leadership and Safe Behavior—The Case of Two Companies in Turkey and Romania

Safety leadership, safe behavior, and safety climate, which are important parts of occupational safety culture, are important in terms of preventing occupational accidents and making the working environment ergonomic. In this context, this study aims to examine the mediating effect of the safety climate on the relationship between transformational leadership and safe behavior. Research was carried out with 287 participants working in two manufacturing plants, one from Turkey and one from Romania. The two data sets were consolidated into a single database (both companies being providers of manufacturing products for the same client in the automotive industry) and were analyzed using the Preacher and Hayes plugin in the SPSS 21 package program because of the research interest in investigating safety behavior in the manufacturing field. The results of the analysis showed that the safety climate had a partial mediating effect on the relationship between transformational leadership and safe behavior. In addition, the study results demonstrated that transformational safety leadership has a significant influence on employees’ perceptions of safety climate and plays an important role in occupational safety-related behaviors. Research results were helpful for practitioners (managers in both companies) and researchers in understanding the importance of safety-climate and transformational safety leadership practices in increasing occupational safety-related behaviors.

The Effect of Safety Leadership on Safety Participation of Employee: A Meta-Analysis

Recently, the promotion of safety participation (SP) has become a hot spot in behavioral safety research and safety management practice. To explore the relationship between safety leadership (SL) and SP, a theoretical model was established and 33 articles (35 independent samples) on work safety from 2000 to 2021 were selected for a meta-analysis. By evaluating the impact of SL, which incorporates transformational, transactional, and passive leadership styles, on work safety. The results show that SL has a positive impact on both safety climate (SC) and SP. Both safety transactional leadership (STAL) and safety transformational leadership (STFL) positively impact SP, and the impact of STFL is greater, while safety passive leadership (SPL) has no impact on SP. The study establishes that SC plays a partial mediating role between transformational SL and employee SP. Under the condition of a developed economic level or high-risk industry, SL indicated a greater influence on SP. Hence, it is recommended that when enhancing the SP of employees, the influence of the macro environment and SC should not be undermined.

Linking Safety-Specific Leader Reward and Punishment Omission to Safety Compliance Behavior: The Role of Distributive Justice and Role Ambiguity

Background

Although positive safety leadership has attracted increasingly academic and practical attention due to its critical effects on followers' safety compliance behavior, far fewer steps have been taken to study the safety impact of laissez-faire leadership.

Objective

This study examines the relationships between safety-specific leader reward and punishment omission (laissez-faire leadership) and followers' safety compliance, and the mediations of safety-specific distributive justice and role ambiguity.

Methods

On a two-wave online survey of 307 workers from high-risk enterprises in China, these relationships were tested by structural equations modeling and bootstrapping procedures.

Results

Findings show that safety-specific leader reward omission was negatively associated with followers' safety compliance through the mediating effects of safety-specific distributive justice and role ambiguity. Safety-specific leader punishment omission was also negatively associated with followers' safety compliance through the mediating effect of safety-specific role ambiguity, while safety-specific distributive justice was an insignificant mediator.

Originality

The study addresses and closes more gaps by explaining how two contextualized laissez-faire leadership measures relate to followers' safety behaviors, following the contextualization and matching principles between predictors, mediators and criteria, and by revealing two mechanisms behind the detrimental effects of laissez-faire leadership on safety outcomes.

Influencing Factors, Formation Mechanism, and Pre-control Methods of Coal Miners′ Unsafe Behavior: A Systematic Literature Review

Coal mine accidents are mainly caused by the unsafe behavior of workers. Studying workers' unsafe behaviors can help in regulating such behaviors and reducing the incidence of accidents. However, there is a dearth of systematic literature review in this area, which has hindered mine managers from fully understanding the unsafe behavior of workers. This study aims to address this research gap based on the literature retrieved from the Web of Science. First, a descriptive statistical analysis is conducted on the year, quantity, publications, and keywords of the literature. Second, the influencing factors, formation mechanism, and pre-control methods of coal miners' unsafe behavior are determined and discussed, and the research framework and future research directions of this study are proposed. The study results will help mine safety managers fully understand the influencing factors, formation mechanism, and pre-control methods of workers' unsafe behavior, and lay a theoretical foundation for the future research direction in this field.

Divergent effects of transformational leadership on safety compliance: A dual-path moderated mediation model

Research on the relationship between transformational leadership and safety compliance has yielded equivocal results. This study investigates how and when transformational leadership produces divergent effects on safety compliance. Using a time-lagged research design, we collect data from a sample of 309 employees in the Chinese construction industry to examine the hypothesized relationship. We find that transformational leadership positively affects safety compliance through employees’ felt obligation toward their leader. However, transformational leadership also negatively impacts safety compliance through safety risk tolerance. We further show that employees’ perception of the safety climate plays a contingent role in the above processes. Specifically, a high-level perceived safety climate strengthens the positive indirect effect of transformational leadership on safety compliance through felt obligation, while a low-level perceived safety climate strengthens the negative indirect effect of transformational leadership on safety compliance through safety risk tolerance. The theoretical and practical implications of the findings are also discussed.

Safety Climate in MT Mining: A Case Study

A safety climate case study was carried out at a surface metal mine where investigators administered the Liberty Mutual Short Scale Safety Climate Survey to 365–368 miners to measure safety climate in consecutive years. Following the baseline safety climate survey in 2019, Foundations for Safety Leadership (FSL) training was conducted with 81 middle to upper management employees at the mine site. Investigators found statistically significant differences in the pre vs. posttraining FSL assessment scores of the middle to upper management employees who attended the training. The follow-up safety climate evaluation was compared to baseline scores and revealed no significant improvement. The overall baseline company safety climate score of 76.38 increased minimally to 76.50 (p-value = 0.616). Investigators also evaluated differences in safety climate between the company’s three major divisions (operations, maintenance, and administration). Both years administration had the highest mean score and operations had the lowest mean score. The authors attributed the statistically significant differences found among the three major divisions to various dissimilarities in their work environments.

Paternalistic Leadership and Safety Participation of High-Speed Railway Drivers in China: The Mediating Role of Leader-Member Exchange

This research aimed to examine the effects of paternalistic leadership on the safety participation of high-speed railway drivers. Survey data were collected from 601 drivers in major Chinese rail companies. Structural equation modeling was conducted to analyze the influence of paternalistic leadership on safety participation via leader–member exchange (LMX). The results indicated that moral leadership directly promotes safety participation. Besides, benevolent leadership was positively associated with safety participation. Also, LMX partially mediates the positive relationship between benevolent leadership, moral leadership, and safety participation. Therefore, paternalistic leadership promotes the safety participation of high-speed railway drivers.

Assessment of the effects of supervisor behaviour, safety motivation and perceived job insecurity on underground miner’s safety citizenship behaviour

Purpose

This paper aims to investigate the effect of mining supervisor behaviour, safety motivation and perceived job insecurity on Ghanaian underground miner’s safety citizenship behaviour.

Design/methodology/approach

The authors proposed a conceptual framework that tested supervisor behaviour as an independent variable, safety motivation as a mediator variable, perceived job insecurity as a moderator variable and safety citizenship behaviour as a dependent variable. The authors tested the hypothesized relationships using 351 valid responses collected through a structured questionnaire using hierarchical regression analysis.

Findings

Results revealed that both components of supervisor behaviour significantly influenced safety motivation and safety citizenship behaviour. Furthermore, safety motivation could mediate the relationships between both components of supervisor behaviour and safety citizenship behaviour. Also, perceived job insecurity failed to moderate the relationship between safety motivation and safety citizenship behaviour.

Originality/value

This current study is vital for managerial practices. The complex conceptual framework also contributes to offering different ways of understanding how supervisors’ behaviours can catalyze improvement or worsen safety outcomes.

Organizational resilience process: integrated model of safety culture

Purpose

The purpose of the study is to create substantial awareness for safety precautions and safety parameters to lessen occupational injuries and accidents. Utilization of safety culture phenomenon with its fundamental understanding has imperative consideration for safety compliance and participation behaviors. Thoughtful aim of this study is the extension of knowledge related to safety orientation particularly in primary health-care workforce.

Design/methodology/approach

Only slips and trips accounted for 40% of workplace injuries in nursing professionals. To identity, the data were collected through structured surveys from nursing professionals of public and private hospitals in Pakistan. To evaluate that data for current study, standardized regression coefficients (parameter estimation) with 95% confidence interval and 5,000 bootstrap samples were subjected. Confirmatory factor analysis was also used to measure the validity of study constructs.

Findings

The potential findings of present study have assured the presence of safety culture at workplace has potential to influences negative safety outcomes. In addition, safety compliance and safety participation as mediation paths would be the strengthening addition to safety model. These findings have extended the existing understanding of compliance and participation behaviors from single factor to two different constructs of safety orientation. This safety culture model offers an evidence-based approach to nursing practitioners and nursing managers with implications for nurse’s safety, education and training.

Originality/value

Occupational injuries and accidental happenings have adversely affecting the quality of care, patient’s recovery spam, satisfaction level and psychological health in care agents. This study has proposed a comprehensive model for understanding the mechanism of possible and reliable safety implications at health-care units. Prior knowledge has limitation to the inevitable effects of occupational injuries only rather than focusing on corrective actions against this phenomenon.

The Mediating Role of Job Competence between Safety Participation and Behavioral Compliance

The effective improvement of employee behavioral compliance and safety performance is an important subject related to the sustainable development of the construction industry. Based on data from a Chinese company (n = 290), this study used a partial least squares-structural equation model to clarify the relationship among safety participation, job competence, and behavioral compliance. Empirical analysis found that: (1) safety participation had a significant positive impact on employees’ behavioral compliance; and (2) job competence played a partial mediating role between safety participation and behavioral compliance. By selecting two new perspectives of safety participation and job competence, this study derived new factors affecting behavioral compliance, constructed a new theory about safety management, and conducted an in-depth discussion on improving behavioral compliance theoretically. Practically, the research put forward a new decision-making model, deconstructed the mechanism between safety participation and behavioral compliance, and provided new guiding strategies for improving employee behavioral compliance.

Facilitating mindful safety practices among first-line workers in the Chinese petroleum industry through safety management practices and safety motivation

The petroleum industry is a high-risk industry and operates under the social technical system. Therefore, the safety behavior of employees needs to be paid high attention. Thus, six dimensions of safety management practices are identified as independent variables to predict a special component of common safety behavior-mindful safety practices in the Chinese petroleum industry. High-reliability organization theory is adopted as the underpinning theory. A total 255 first-line workers from a Chinese petroleum company participated in this survey. The results reveal that safety training and safety communication and feedback are positively related to safety motivation. Moreover, workers' involvement and safety promotion policy have direct and positive impacts on mindful safety practices. Further, safety motivation is found to play a mediating role in the prediction of mindful safety practices in the Chinese petroleum industry. These findings give new insights for petroleum companies into how to promote mindful safety practices in the workplace.

Safety-Specific Passive-Avoidant Leadership and Safety Compliance among Chinese Steel Workers: The Moderating Role of Safety Moral Belief and Organizational Size

Despite the documented relationship between active-approaching leadership behaviors and workplace safety, few studies have addressed whether and when passive-avoidant leadership affects safety behavior. This study examined the relationship between two types of safety-specific passive-avoidant leadership, i.e., safety-specific leader reward omission (SLRO) and safety-specific leader punishment omission (SLPO), and safety compliance, as well as the moderating effects of an individual difference (safety moral belief) and an organizational difference (organizational size) in these relationships. These predictions were tested on a sample of 704 steel workers in China. The results showed that, although both SLRO and SLPO are negatively related to safety compliance, SLPO demonstrated a greater effect than SLRO. Moreover, we found that steel workers with high levels of safety moral belief were more resistant to the negative effects of SLRO and SLPO on safety compliance. Although steel workers in large enterprises were more resistant to the negative effects of SLPO than those in small enterprises, the SLRO-compliance relationship is not contingent upon organizational size. The current study enriched the safety leadership literature by demonstrating the detrimental and relative effects of two types of safety-specific passive-avoidant leadership on safety compliance and by identifying two boundary conditions that can buffer these relationships among steel workers.

Non-Technical Skills in Social Networks: The Spread of Safety Communication and Teamwork in a Warehouse

Safety at work should be considered as the result of the daily interaction of operators. The present research wants to analyze which factors are involved in the development of social networks about safety at work. We assumed that two relational non-technical skills, such as safety communication and safety team member support, affect the in-degree and out-degree bonds of workers in social networks. One hundred and eight workers of a warehouse were the participants of the research, in which they were asked to fill out a self-reported questionnaire. Multiple linear regression analysis was used to test the hypotheses. Results confirmed that safety communication and safety support skills play a role in determining the quantity and the quality of social bonds that workers can create at the workplace. To be specific, while safety communication was found to be associated with out-degree centrality (b = 0.24; p = 0.01), a nonsignificant relationship was found for in-degree centrality. In contrast, safety team member support was found to be associated with in-degree centrality (b = 0.28; p = 0.04). In other words, on the one hand, it was found that high levels of safety communication skills are associated with the tendency of workers to proactively search for colleagues with whom they can share information about safety. On the other hand, workers with high levels of safety support skills tend to be considered as reference points in terms of safety by colleagues, who are more prone to look for their help. Implications for both scientists and practitioners are discussed.

Information communication technology, knowledge management, job and customer satisfaction: a study of healthcare workers in Lebanon

Purpose

The paper aims to identify, analyze and discuss the links between information and communications technology (ICT) and knowledge management (KM), on the one hand, and job satisfaction (JS) and customer satisfaction (CSAT), on the other hand, in hospitals in Lebanon.

Design/methodology/approach

A mixed-methods approach has been adopted that utilizes both quantitative and qualitative primary data, along with supportive and peripheral secondary ones. Specifically, a survey measuring variables was conducted among health-care professionals, with whom interviews were also conducted for greater depth and to refine the findings and relationships under study.

Findings

The results of the quantitative study find no statistically significant relationships between the variables. The qualitative study suggests that this is likely because of the subjectivity of the evaluations and/or their mutual canceling. This is further partly explained not only through technical/functional deficiencies of the system but also through the impact of implicit and peripheral forces, adjacent to contextual aspects.

Originality/value

The research adds significant and focused knowledge on the subject of the linkage of ICT and KM with JS and CSAT, in the context of emerging economies.

Trust in leader as a pathway between ethical leadership and safety compliance

Purpose

Although a great number of studies have established the important role of leadership in workplace safety, it appears researchers are yet to consider the role that trust in leaders could play between ethical leadership and safety compliance within healthcare. To address that imbalance, this study aims to investigate the relationship between ethical leadership and safety compliance, with trust in the leader as the mediator.

Design/methodology/approach

Data were collected in three time periods from 237 hospital staff nurses (76.8 per cent women and 23.2 per cent men). Ordinary least squares regression-based path analysis using PROCESS for statistical package for the social sciences (SPSS) macro was used to test the hypotheses.

Findings

Results showed that ethical leadership was positively related to trust in a leader but was not related to safety compliance. In addition, trust in leader was positively related to safety compliance and also mediated the positive relationship between ethical leadership and safety compliance.

Research limitations/implications

The data were collected within healthcare organisations in a few localities in Nigeria, making it difficult to generalise the findings beyond the current sample let alone the entire country or even continent.

Practical implications

The findings imply that ethical leadership may not be directly effective in improving the safety compliance of subordinate nurses unless such a leader first develops a trust-based relationship with the subordinates.

Originality/value

The current study builds on and extends the burgeoning research in the area of leadership and employee outcome by investigating not only the direct relationship between ethical leadership and safety compliance but also incorporating trust in a leader as a mediator of this relationship.

Values-in-action that support safe production

INTRODUCTION

Safe production is a sustainable approach to managing an organization's operations that considers the interests of both management and workers as salient stakeholders in a productive and safe workplace. A supportive culture enacts values versus only espousing them. These values-in-action are beliefs shared by both management and workers that align what should happen in performing organizational routines to be safe and be productive with what actually is done. However, the operations and safety management literature provides little guidance on which values-in-action are most important to safe production and how they work together to create a supportive culture.

METHOD

The researchers conducted exploratory case studies in 10 manufacturing plants of 9 firms. The researchers compared plant managers' top-down perspectives on safety in the performance of work and workers' bottom-up experiences of the safety climate and their rates of injury on the job. Each case study used data collected from interviewing multiple managers, the administration of a climate survey to workers and the examination of the plant's injury rates over time as reported to its third party health and safety insurer.

RESULTS

The researchers found that plants with four values-in-action -a commitment to safety, discipline, prevention and participation-were capable of safe production, while plants without those values were neither safe nor productive. Where culture and climate aligned lower rates of injury were experienced.

DISCUSSION AND CONCLUSION

The four value-in-actions must all be present and work together in a self-reinforcing manner to engage workers and managers in achieving safe production. Practical application: Managers of both operations and safety functions do impact safety outcomes such as reducing injuries by creating a participatory environment that encourage learning that improves both safety and production routines.

Leadership in the safety sense: where does perceived organisational support fit?

Purpose

The purpose of this paper is to examine leaders’ influence on the safety behaviours of employees and the possible mediating role of perceived organisational support (POS), focussing on transformational and transactional leadership.

Design/methodology/approach

Data were gathered through a survey from 264 engineers and technicians in the power transmission subsector in Ghana and analysed using structural equation modelling.

Findings

The analyses revealed that transformational leadership influenced safety behaviours positively while transactional leadership had no significant influence on employees’ safety behaviours. POS also mediated between the leadership styles and safety behaviours.

Practical implications

Supervisors need to exhibit more transformational leadership behaviours and organisations need to show support for their employees’ wellbeing in order to aid supervisors’ influence on employees’ safety behaviours, especially if the leaders are more transactional in nature.

Originality/value

The study addresses a dearth in literature and highlights the influences of leadership styles on the safety behaviours of the employees, as well as the importance of the organisation to commit to employees’ support and safety so as to enhance their good perceptions and consequently elicit better performance from them.

Knowledge Management Influence on Safety Management Practices

Many studies have been conducted in relation with knowledge management (KM), indicating the benefit associated with KM; among which safety management (SM) improvement is one of them. So, the aim of this article is to assess the influence of KM on SM practices in construction industry. In this regard, various factors that affect KM and SM are identified through literature review. Then, a questionnaire survey was facilitated to collect data based on the identified factors. These factors are ranked using a relative importance index (RII) to ascertain the level of importance among its group. Further, correlation analysis and multiple linear regression analysis are carried out to test and measure the strength of the relationship between KM and SM factors. Results indicate that there exists a definite and significant relationship between the factors of KM and SM in construction industry. Overall, the results obtained from the study will assist practitioners and professionals to develop and upgrade KM and SM practices in construction industry.

Mediating role of the perceived benefits of using a medication safety system in the relationship between transformational leadership and the medication-error management climate

Background

Evidence indicates that applying technology to medication safety will improve the quality of medical services and enhance the medication-error management climate. The perceived benefits of using the medication safety system are an important factor for adopting a system.

Aims

The purpose of this study was to investigate the mediating role of the perceived benefits of using a medication safety system in the relationship between transformational leadership and the medication-error management climate.

Methods

A total of 153 staff nurses from 11 secondary or tertiary hospitals in Korea were included. Descriptive statistics, t-tests, analysis of variance, Pearson correlations and multiple regression analyses were used.

Results

Transformational leadership was significantly correlated with the perceived benefits of the system use (r = .17, p = .032) and medication-error management climate (r = .55, p < .001). The perceived benefit of using the medication safety system was a mediator between transformational leadership and the medication-error management climate.

Conclusions

When chief executive officers construct and implement a medication safety system in their hospitals, transformational leadership can enhance the perceived benefits of system use, which is an important factor that contributes to a positive medication-error management climate.

Destructive forms of leadership

Purpose

The purpose of this paper is to examine the relationship between abusive supervision and employee health and safety outcomes in Study 1 and to examine the effect of inconsistent leadership, operationalized as the interaction between transformational leadership and supervisor incivility, on employee safety participation in Study 2.

Design/methodology/approach

In Study 1, survey data were gathered from n=145 healthcare workers. In Study 2, survey data were gathered from n=177 nurses.

Findings

A partially mediated structural model was estimated in Study 1 and the results show that the model provided a good fit to the data χ2 (1)=1.27, p=0.23. Abusive supervision predicted safety climate (β=−0.41, p<0.01) and psychological health (β=−0.27, p<0.01). Safety climate, in turn, predicted psychological health (β= 0.40, p<0.01) and safety participation (β= 0.37, p<0.01). Study 2: moderated regression analysis showed that inconsistent leadership significantly predicted employee safety participation, F(5,144)=4.46, p<0.01.

Originality/value

Theoretical and practical implications for creating psychologically healthy workplaces through interventions aimed at improving leader effectiveness are discussed.

Is there agreement between worker self and supervisor assessment of worker safety performance? An examination in the construction industry

INTRODUCTION

Individual safety performance (behavior) critically influences safety outcomes in high-risk workplaces. Compared to the study of generic work performance on different measurements, few studies have investigated different measurements of safety performance, typically relying on employees' self-reflection of their safety behavior. This research aims to address this limitation by including worker self-reflection and other (i.e., supervisor) assessment of two worker safety performance dimensions, safety compliance and safety participation.

METHOD

A sample of 105 workers and 17 supervisors in 17 groups in the Chinese construction industry participated in this study. Comparisons were made between worker compliance and participation in each measurement, and between workers' and supervisors' assessment of workers' compliance and participation. Multilevel modeling was adopted to test the moderating effects on the worker self-reflection and supervisor-assessment relationship by group safety climate and the work experience of supervisors.

RESULTS

Higher levels of safety compliance than participation were found for self-reflection and supervisor assessment. The discrepancy between the two measurements in each safety performance dimension was significant. The work experience of supervisors attenuated the discrepancy between self- and supervisor-assessment of compliance. Contrary to our expectations, the moderating effect of group safety climate was not supported.

CONCLUSIONS

The discrepancy between worker self- and supervisor-assessment of worker safety performance, thus, suggests the importance of including alternative measurements of safety performance in addition to self-reflection. Lower levels of participation behavior in both raters suggest more research on the motivators of participatory behavior. Practical applications The discrepancy between different raters can lead to negative reactions of ratees, suggesting that managers should be aware of that difference. Assigning experienced supervisors as raters can be effective at mitigating interrater discrepancy and conflicts in the assessment of compliance behavior.

Work environment investments: outcomes from three cases

Work environment investments are important in order to create a healthy and safe workplace. This article presents findings from a seven-step interventions process aimed at examining and following-up work environment investments in small and medium-sized enterprises (SMEs), with a particular focus on air contaminants. Three different cases were analyzed and included in the study: (a) an educational center for welding; (b) a paint station in furniture manufacturing; (c) a joinery in furniture manufacturing. The results show that the work environment investments were highly appreciated by the employees and managers, but at the same time the investment could be optimized through markedly decreased exposure levels for the worker. Factors such as follow-ups of the investment, education and training in how to use the equipment, worker involvement in the process and leadership engagement are important in order to optimize work environment investments.

The Impact of Transformational Leadership on Safety Climate and Individual Safety Behavior on Construction Sites

Unsafe acts contribute dominantly to construction accidents, and increasing safety behavior is essential to reduce accidents. Previous research conceptualized safety behavior as an interaction between proximal individual differences (safety knowledge and safety motivation) and distal contextual factors (leadership and safety climate). However, relatively little empirical research has examined this conceptualization in the construction sector. Given the cultural background of the sample, this study makes a slight modification to the conceptualization and views transformational leadership as an antecedent of safety climate. Accordingly, this study establishes a multiple mediator model showing the mechanisms through which transformational leadership translates into safety behavior. The multiple mediator model is estimated by the structural equation modeling (SEM) technique, using individual questionnaire responses from a random sample of construction personnel based in Hong Kong. As hypothesized, transformational leadership has a significant impact on safety climate which is mediated by safety-specific leader–member exchange (LMX), and safety climate in turn impacts safety behavior through safety knowledge. The results suggest that future safety climate interventions should be more effective if supervisors exhibit transformational leadership, encourage construction personnel to voice safety concerns without fear of retaliation, and repeatedly remind them about safety on the job.