Bacterial decolorization and degradation of azo dyes: A review

Energetic utilization of corn stalk and elimination of methyl orange in ECMO-like integrated reactor: Co-occurrence of anaerobic digestion and aerobic treatment

For the simultaneous energetic utilization of corn stalk and azo-dye contaminated wastewater, an ECMO-like integrated reactor was come up to achieve the biogas production and azo-dye degradation during anaerobic digestion (AD). Methyl orange (MO) was selected as the model compound for azo-dye. The ECMO-like reactor included AD main reactor with a spray device and solid-liquid separation components, integrated with an aeration reactor for biogas slurry. Methane yields of corn stalks (100.82 mL/g VS) were highest in the ECMO-like reactor, compared with reactors without aeration. As a stable metabolite, 4-aminobenzenesulfonic acid (4-ABA) was detected in AD, while it was assumed that the metabolites can be further transformed in the ECMO-like reactor (R3), due to the 4-ABA removal efficiency as 92.87 % after 35 days' digestion. Class Alphaproteobacteria and Clostridia were assumed as functional microbes responding to aeration. Overall, this ECMO-like integrated reactor provided a novel biotechnology strategy for agricultural and azo dye waste treatment.

Hues of risk: investigating genotoxicity and environmental impacts of azo textile dyes

The textile industry, with its extensive use of dyes and chemicals, stands out as a significant source of water pollution. Exposure to certain textile dyes, such as azo dyes and their breakdown products like aromatic amines, has been associated with health concerns like skin sensitization, allergic reactions, and even cancer in humans. Annually, the worldwide production of synthetic dyes approximates 7 × 107 tons, of which the textile industry accounts for over 10,000 tons. Inefficient dyeing procedures result in the discharge of 15-50% of azo dyes, which do not adequately bind to fibers, into wastewater. This review delves into the genotoxic impact of azo dyes, prevalent in the textile industry, on aquatic ecosystems and human health. Examining different families of textile dye which contain azo group in their structure such as Sudan I and Sudan III Sudan IV, Basic Red 51, Basic Violet 14, Disperse Yellow 7, Congo Red, Acid Red 26, and Acid Blue 113 reveals their carcinogenic potential, which may affect both industrial workers and aquatic life. Genotoxic and carcinogenic characteristics, chromosomal abnormalities, induced physiological and neurobehavioral changes, and disruptions to spermatogenesis are evident, underscoring the harmful effects of these dyes. The review calls for comprehensive investigations into the toxic profile of azo dyes, providing essential insights to safeguard the aquatic ecosystem and human well-being. The importance of effective effluent treatment systems is underscored to mitigate adverse impacts on agricultural lands, water resources, and the environment, particularly in regions heavily reliant on wastewater irrigation for food production.

Efficient dye adsorption of mesoporous activated carbon from bamboo parenchyma cells by phosphoric acid activation

In order to solve the environmental damage caused by the discharge of dyes as industrial wastewater, the development of efficient and sustainable adsorbents is the key, while most of the previous studies on bamboo parenchyma cells have focused on their microstructural, functional and mechanical properties, and few of the properties in adsorption have been investigated. To evaluate the role of the unique microstructure of bamboo parenchyma cells on adsorption after carbonization and activation, PC-based activated carbon (PPAC) was fabricated by the phosphoric acid activation method and tested for adsorption using methylene blue (MB). The effect of mesoporous structure on MB adsorption was investigated in detail using PPAC-30C impregnated with phosphoric acid at a concentration of 30%. The results showed that the adsorption performance was influenced by single-factor experiments (e.g., pH, activated carbon dosing). The adsorption isotherms and kinetics could conform to the Langmuir model (R2 = 0.983-0.994) and pseudo-second-order kinetic model (R2 = 0.822-0.991) respectively, and the maximum MB adsorption capacity of adsorbent was 576 mg g-1. The adsorption mechanism of MB on PPAC-30C includes physical adsorption, electrostatic attraction, hydrogen bonding, and the π-π conjugation effect, which was dominated by physical adsorption. The results of this study show that PPAC has good application prospects for cationic dye removal.

Influence of colourants on environmental degradation of plastic litter

Plastic degradation and the resultant production of microplastics has an important effect on the environment and fauna across the world. This paper shows that the colourant incorporated into plastic formulations has a significant effect on the stability of plastics. A static experimental exposure of differently coloured polypropylene bottle tops from the same manufacturer to a moderate climate over 3 years showed that black, white and silver plastics were almost unaffected whereas the specific blue, green and especially red pigments used in this study were significantly degraded. The second part of the study collected littered HDPE plastic containers from a remote South African beach and analysed their condition as a function of the given manufacturing date stamp. Most items were black or white and samples up to 45 years old were found with relatively little environmental degradation other than mild abrasion. It appears that carbon and titanium dioxide colourants protect the HDPE polymer from photolytic degradation. While anthraquinone, phthalocyanine and diketopyrrolopyrrole pigments were found to enable UV light to degrade the polymer leading to brittle plastics, promoting the formation of microplastics, it is likely that other pigments that do not strongly absorb in the UV will result in similar degradation.

Recent Developments in Porphyrin-Based Metal-Organic Framework Materials for Water Remediation under Visible-Light Irradiation

Access to clean drinking water is a basic requirement, and eliminating pollutants from wastewater is important for saving water ecosystems. The porous structure and surface characteristics of metal-organic frameworks (MOFs) can function as a perfect scaffold for removing toxic compounds from wastewater. Porphyrins are promising building blocks for constructing MOFs. Porphyrin-based metal-organic frameworks (P-MOFs) have been fabricated using porphyrin ligands, metal clusters, or ions. These materials can harvest light from a wide region of the solar spectrum, and their framework morphology and physicochemical properties can be controlled by changing their peripheral subunits or metal ions. These porous crystalline materials have generated interest because of their distinctive characteristics, including large permanent porosity, interesting surface morphology, broad conformational diversity, high photostability, and semiconducting nature. This article discusses the recent progress and usefulness of P-MOFs. The fabrication procedures of P-MOFs are discussed, followed by the adsorptive and photocatalytic removal of contaminants from wastewater. The relationships between the geometries of P-MOFs and their light-harvesting and charge-transfer mechanisms for the photocatalytic degradation of pollutants are highlighted. Finally, some future perspectives and obstacles in the photodegradation usage of P-MOFs are discussed, along with feasible research directions to standardize efficient photocatalysts for improved photodegradation for water treatment.

Decolorization and detoxification of Brilliant Crocein GR by a newly enriched thermophilic consortium

The environmental pollution caused by azo dyes at high temperatures has become an urgent problem. However, little attention has been paid to decolorizing azo dyes by thermophilic consortiums. In this study, a thermophilic bacterial consortium (BCGR-T) mainly composed of two genera, namely, Caldibacillus (70.90%) and Aeribacillus (17.63%) was first enriched, which can decolorize Brilliant Crocein GR (BCGR) at high temperatures (50-75 °C), pH values of 6∼8, dye concentrations (100-400 mg/L) and salinities (1-5%, w/v). The enzyme activity results showed that the azoreductase activity was nearly 8.8 times that of the control (p < 0.01), and the intracellular lignin peroxidase was also highly expressed with enzyme activity of 5.64 U (min-1 mg-1 protein) (p < 0.05), indicated that both azoreductase and intracellular lignin peroxidase played an important part in the decolorization process. Furthermore, seven new intermediate metabolic products, including aniline, phthalic acid, 2-carboxy benzaldehyde, phenylacetic acid, benzoic acid, toluene, and 4-methyl-hexanoic acid, were identified. In addition, functional genes related with the azo dye decolorization, such as those encoding the azoreductase, laccase, FMN reductase, NADPH-/NADH-quinone oxidoreductases and NADPH-/NADH dehydrogenases, catechol dioxygenase, homogentisate 1,2-dioxygenase, protocatechuate 3,4-dioxygenase, gentisate 1,2-dioxygenase, azobenzene reductase, naphthalene 1,2-dioxygenase, benzoate/toluate 1,2-dioxygenase, and anthranilate 1,2-dioxygenase and so on were found in the metagenome of the consortium BCGR-T. Finally, a new decolorization pathway of the thermophilic consortium BCGR-T was proposed. In addition, the phototoxicity of BCGR decreased after decolorization. Overall, the thermophilic consortium BCGR-T could be a promising candidate in the treatment of high concentration azo dye wastewater at high temperatures.

Biodegradation of commercial textile reactive dye mixtures by industrial effluent adapted bacterial consortium VITPBC6: a potential technique for treating textile effluents

Textile industries release major fraction of dyestuffs in effluents leading to a major environmental concern. These effluents often contain more than one dyestuff, which complicates dye degradation. In this study ten reactive dyes (Reactive Yellow 145, Reactive Yellow 160, Reactive Orange 16, Reactive Orange 107, Reactive Red 195, Reactive Blue 21, Reactive Blue 198, Reactive Blue 221, Reactive Blue 250, and Reactive Black 5) that are used in textile industries were subjected to biodegradation by a bacterial consortium VITPBC6, formulated in our previous study. Consortium VITPBC6 caused single dye degradation of all the mentioned dyes except for Reactive Yellow 160. Further, VITPBC6 efficiently degraded a five-dye mixture (Reactive Red 195, Reactive Orange 16, Reactive Black 5, Reactive Blue 221, and Reactive Blue 250). Kinetic studies revealed that the five-dye mixture was decolorized by VITPBC6 following zero order reaction kinetic; Vmax and Km values of the enzyme catalyzed five-dye decolorization were 128.88 mg L-1 day-1 and 1003.226 mg L-1 respectively. VITPBC6 degraded the dye mixture into delta-3,4,5,6-Tetrachlorocyclohexene, sulfuric acid, 1,2-dichloroethane, and hydroxyphenoxyethylaminohydroxypropanol. Phytotoxicity, cytogenotoxicity, microtoxicity, and biotoxicity assays conducted with the biodegraded metabolites revealed that VITPBC6 lowered the toxicity of five-dye mixture significantly after biodegradation.

Recent updates on remediation approaches of environmentally occurring pollutants using visible light-active nano-photocatalysts

Photocatalysis emerges as a potential remedy for the issue of an unreliable light source. Recognized as the most dependable and potent energy source sustaining life on Earth, sunlight offers a promising solution. Sunlight is abundant and free, operational costs associated with running photocatalytic system using nanoparticles are often lower compared to system relying on artificial light source. The escalating problem of water pollution, particularly in highly industrialized nations, necessitates effective wastewater treatment methods. These methods aim to combat elevated pollution levels, encompassing pharmaceuticals, dyes, flame retardants, and pesticide components. Advanced oxidation processes within photocatalytic wastewater treatment exhibit substantial promise for removing complex organic pollutants. Doped nanomaterials, with their enhanced properties, enable efficient utilization of light. Coupled nanomaterials present significant potential in addressing both water and energy challenges by proficiently eliminating persistent pollutants from environment. Photocatalysis when exposed to sunlight can absorb photons and generate e- h + pairs. This discussion briefly outlines the wastewater treatment facilitated by interconnected nanomaterials, emphasizing their role in water-energy nexus. In exploring the capabilities of components within a functional photocatalyst, a comprehensive analysis of both simple photocatalysts and integrated photocatalytic systems is undertaken. Review aims to provide detailed explanation of the impact of light source on photon generation and significance of solar light on reaction kinetics, considering various parameters such as catalyst dosage, pH, temperature, and types of oxidants. By shedding light on these aspects, this review seeks to enhance our understanding of intricate processes involved in photocatalysis and its potential applications in addressing contemporary environmental challenges.

Current trends in textile wastewater treatment-bibliometric review

A bibliometric study using 1992 to 2021 database of the Science Citation Index Expanded was carried out to identify which are the current trends in textile wastewater treatment research. The study aimed to analyze the performance of scholarly scientific communications in terms of yearly publications/citations, total citations, scientific journals, and their categories in the Web of Sciences, top institutions/countries and research trends. The annual publication of scientific articles fluctuated in the first ten years, with a steady decrease for the last twenty years. An analysis of the most common terms used in the authors' keywords, publications' titles, and KeyWords Plus was carried out to predict future trends and current research priorities. Adsorbent nanomaterials would be the future of wastewater treatment for decoloration of the residual dyes in the wastewater. Membranes and electrolysis are important to demineralize textile effluent for reusing wastewater. Modern filtration techniques such as ultrafiltration and nanofiltration are advanced membrane filtration applications.

Optimized decolorization of two poly azo dyes Sirius Red and Sirius Blue using laccase-mediator system

Factors, namely pH, laccase-like activity, dyes concentration as well as 1-Hydroxybenzotriazole (HBT) concentration was examined. The results indicated that the maximum decolorization yield and rate reached 98.30 ± 0.10% and 5.84 ± 0.01%/min, respectively for Sirius Blue, and 99.34 ± 0.47% and 5.85 ± 0.12%/min, respectively for Sirius Red after 4 h. The presence of the redox mediator 1-hydroxybenzotriazole (HBT) greatly improved the decolorization levels. The optimum concentrations of HBT, dyes, and laccase were 0.62 mM, 50 mg/L, and 0.89 U/mL respectively at pH 4.58 for both dyes. Phytotoxicity tests using treated and untreated dyes proved that the applied treatment slightly decreased the toxicity of the by-products. However, the germination index (GI) increased from 14.6 to 36.08% and from 31.6 to 36.96% for Sirius Red and Sirius Blue, respectively. The present study focused on the treatment of two recalcitrant azo dyes, namely: Sirius Blue (Direct Blue 71) and Sirius Red (Direct Red 80). The decolorization was performed using cell-free supernatant from Coriolopsis gallica culture with high laccase activity. Response surface methodology (RSM) and Box-Behnken design were applied to optimize the decolorization of the two tested dyes. The effect of four.

Contamination of textile dyes in aquatic environment: Adverse impacts on aquatic ecosystem and human health, and its management using bioremediation

Textile dyes are the burgeoning environmental contaminants across the world. They might be directly disposed of from textile industries into the aquatic bodies, which act as the direct source for the entire ecosystem, ultimately impacting the human beings. Hence, it is essential to dissect the potential adverse outcomes of textile dye exposure on aquatic plants, aquatic fauna, terrestrial entities, and humans. Analysis of appropriate literature has revealed that textile dye effluents could affect the aquatic biota by disrupting their growth and reproduction. Various aquatic organisms are targeted by textile dye effluents. In such organisms, these chemicals affect their development, behavior, and induce oxidative stress. General populations of humans are exposed to textile dyes via the food chain and drinking contaminated water. In humans, textile dyes are biotransformed into electrophilic intermediates and aromatic amines by the enzymes of the cytochrome family. Textile dyes and their biotransformed products form the DNA and protein adducts at sub-cellular moiety. Moreover, these compounds catalyze the production of free radicals and oxidative stress, and trigger the apoptotic cascades to produce lesions in multiple organs. In addition, textile dyes modulate epigenetic factors like DNA methyltransferase and histone deacetylase to promote carcinogenesis. Several bioremediation approaches involving algae, fungi, bacteria, biomembrane filtration techniques, etc., have been tested and some other hybrid systems are currently under investigation to treat textile dye effluents. However, many such approaches are at the trial stage and require further research to develop more efficient, cost-effective, and easy-to-handle techniques.

Biodegradation and Decolorization of Crystal Violet Dye by Cocultivation with Fungi and Bacteria

Microbial degradation of dyes is vital to understanding the fate of dyes in the environment. In this study, a fungal strain A-3 and a bacterial strain L-6, which were identified as Aspergillus fumigatus and Pseudomonas fluorescens, respectively, had been proven to efficiently degrade crystal violet (CV) dye. The decolorization of CV dye by fungal and bacterial cocultivation was investigated. The results showed that the decolorization rate of cocultures was better than monoculture (P. fluorescens in L-6 (PF), and that of A. fumigatus A-3 (AF)). Furthermore, enzymatic analysis further revealed that Lac, MnP, Lip, and NADH-DCIP reductases were involved in the biodegradation of CV dyes. UV-visible spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, and gas chromatography-mass spectrometry (GC-MS) were used to examine the degradation products. GC-MS analysis showed the presence of 4-(dimethylamino) benzophenone, 3-dimethylaminophenol, benzyl alcohol, and benzaldehyde, indicating that CV was degraded into simpler compounds. The phytotoxicity tests revealed that CV degradation products were less toxic than the parent compounds, indicating that the cocultures detoxified CV dyes. As a result, the cocultures are likely to have a wide range of applications in the bioremediation of CV dyes.

Visualization of an Endogenous Mitochondrial Azoreductase Activity under Normoxic Conditions Using a Naphthalimide Azo-Based Fluorogenic Probe

In this paper, we demonstrate the existence of an endogenous mitochondrial azoreductase (AzoR) activity that can induce the cleavage of N═N double bonds of azobenzene compounds under normoxic conditions. To this end, 100% OFF-ON azo-based fluorogenic probes derived from 4-amino-1,8-naphthalimide fluorophores were synthesized and evaluated. The in vitro study conducted with other endogenous reducing agents of the cell, including reductases, demonstrated both the efficacy and the selectivity of the probe for AzoR. Confocal experiments with the probe revealed an AzoR activity in the mitochondria of living cells under normal oxygenation conditions, and we were able to demonstrate that this endogenous AzoR activity appears to be expressed at different levels across different cell lines. This discovery provides crucial information for our understanding of the biochemical processes occurring within the mitochondria. It thus contributes to a better understanding of its function, which is implicated in numerous pathologies.

Unveiling the azo-reductase mechanism in Pseudomonas putida for efficient decolorization of textile Reactive dyes: an in-silico study

The textile industry utilizing affordable azo dyes is a high threat to aquatic life and causes environmental problems due to their toxicity. Biodegradation of azo dyes employing microbes and enzymes has proved to be an efficient method for treating industrial effluent. This study used the novel microbial consortium to decolorize reactive azo dyes (Reactive Red 120; Reactive Black 5 and Reactive Blue 13), and its azo-reductase activity was evaluated. The metagenomic analysis of the consortium identified azo-reductase-producing bacterial species. The molecular docking revealed that PpAzoR from Pseudomonas putida had the highest binding affinities for all the three dyes such as Reactive Black 5 (-9.3 kcal/mol), Reactive Blue 13 (-9.8 kcal/mol) and Reactive Red 120 (-10.7 kcal/mol). The structural rigidity and stability of the docked complex were confirmed through MD simulations evaluated across multiple descriptors from the simulation trajectories. Further, MMPBSA analysis validated the results that binding of the ligands, i.e. dye molecules Reactive Black (RB5), Reactive Blue (RB13) and Reactive Red (RR120) binding with the Azoreductase (PpAzoR) to the screened Azo-dyes was spontaneous. Based on molecular dynamics simulations for 100 ns, RR 120 showed the highest binding affinity (-411.336 ± 46.799 KJ/mol), followed by RB5 (-288.012 ± 33.371 KJ/mol). The dyes (RR120 and RB5) exhibited stable interactions with the target azoreductase (PpAzoR). The present study provides insights that PpAzoR shows the highest decolorization potency, which could be interpreted as a potential dye-degrading protein based on dye-degrading assay findings.Communicated by Ramaswamy H. Sarma.

Porphyrin-Based Nanomaterials for the Photocatalytic Remediation of Wastewater: Recent Advances and Perspectives

Self-organized, well-defined porphyrin-based nanostructures with controllable sizes and morphologies are in high demand for the photodegradation of hazardous contaminants under sunlight. From this perspective, this review summarizes the development progress in the fabrication of porphyrin-based nanostructures by changing their synthetic strategies and designs. Porphyrin-based nanostructures can be fabricated using several methods, including ionic self-assembly, metal-ligand coordination, reprecipitation, and surfactant-assisted methods. The synthetic utility of porphyrins permits the organization of porphyrin building blocks into nanostructures, which can remarkably improve their light-harvesting properties and photostability. The tunable functionalization and distinctive structures of porphyrin nanomaterials trigger the junction of the charge-transfer mechanism and facilitate the photodegradation of pollutant dyes. Finally, porphyrin nanomaterials or porphyrin/metal nanohybrids are explored to amplify their photocatalytic efficiency.

Electrochemical detection and removal of brilliant blue dye via photocatalytic degradation and adsorption using phyto-synthesized nanoparticles

Herein, we report a sensitive electrochemical platform prepared by modifying the electrode surface with copper-doped zinc oxide nanoparticles; these nanoparticles were prepared via a green synthetic approach using the extract of Cassia fistula leaves and multiwalled carbon nanotubes (MWCNTs). For the best response of the electrode modifier, a number of experimental conditions were optimized to obtain the most intense signal of the target analyte Coomassie brilliant blue using a rapid analysis technique square wave voltammetry. The designed sensor displayed remarkable sensitivity for Coomassie brilliant blue with a detection limit of 0.1 nM under the optimized conditions. Moreover, the repeatability, specificity and reproducibility of the designed sensor demonstrated its potential for practical applications. The sensing platform was also used for monitoring the degradation kinetics of the Coomassie brilliant blue dye. Catalytic degradation of the dye was performed using the synergistic effect of Cu-ZnO NPs together with Fenton reagent. The dye degraded by 96% in 60 minutes under neutral conditions, which is one of the main achievements of this work that has never been reported. The photocatalytic breakdown of Coomassie brilliant blue was also monitored using UV-visible spectroscopy. The degradation kinetics results of both techniques agreed well. The adsorption of Coomassie brilliant blue using ZnO NPs was monitored spectrophotometrically. The adsorption data were fitted in a pseudo-second order kinetic model by following the Langmuir isotherm at lower concentration and Freundlich isotherm at higher concentration.

Enhancing Fenton-like Degradation of Organic Pollutants at Neutral pH by Multivalent Cu NCs/HAp Nanocatalysts

Heterogeneous Fenton-like catalysis is a widely used method for the degradation of organic pollutants. However, it still has some limitations such as low activity in the neutral condition, low conversion rates of metals with different valence states, and potential secondary metal pollution. In this study, a Fenton-like nanocatalyst was first created by generating ultrasmall copper nanoclusters (Cu NCs) on the surface of hydroxyapatite (HAp) through a process of doping followed by modification. This resulted in the formation of a composite nanocatalyst known as Cu NCs/HAp. With the help of hydrogen peroxide (H2O2), Cu NCs/HAp exhibits an outstanding Fenton-like catalytic performance by efficiently degrading organic dyes such as methylene blue under mild neutral conditions. The removal rate can reach over 83% within just 30 min, demonstrating ideal catalytic universality and stability. The improved Fenton-like catalytic performance of Cu NCs/HAp can be ascribed to the synergistic effect of the multivalent Cu species through two simultaneous reaction pathways. During route I, the embedded Cu NCs with a core-shell Cu0/Cu+ structure can undergo sequential oxidation to form Cu2+, which continuously activates H2O2 to generate hydroxyl radicals (•OH) and singlet oxygen (1O2). In route II, Cu2+ produced from route I and initially adsorbed on the surface of HAp can be reduced by H2O2, thus regenerating Cu+ species for route I and achieving a closed-loop reaction. This work has confirmed that Cu NCs loaded on HAp may be an alternative Fenton-like catalyst for degradation of organic pollutants and environmental remediation, opening up new avenues for potential applications of other Cu NCs in future water pollution control.

Kinetic Study of Coprinus cinereus Peroxidase-Catalyzed Oxidation of 2,2'-Dihydroxyazobenzene

Azo dyes are of concern due to their harmful effects on the environment and human health. The oxidation of 2,2'-dihydroxyazobenzene (DHAB) catalyzed with recombinant Coprinus cinereus (rCiP) peroxidase was investigated. The kinetic measurements were performed using the spectrophotometric and fluorimetric methods. The dependences of the initial reaction rates on enzyme, substrate and hydrogen peroxide concentrations during DHAB oxidation were established, and bimolecular constants of enzyme interaction with DHAB were calculated. This research demonstrated that the initial biocatalytic oxidation rates of DHAB depend on the pH and the estimated pKa values of the active forms of rCip. This study's findings thus contribute to a more comprehensive understanding of the biocatalytic oxidation of DHAB, providing valuable data for assessing the long-term toxicity, carcinogenesis and epigenetic effects of azo dyes in the environment.

Phytotoxicity and genotoxicity study of reactive red 141 dye on mung bean (Vigna radiata (L.) Wilczek) seedlings

BACKGROUND

Reactive Red (RR) 141 dye is widely used in various industrial applications, but its environmental impact remains a growing concern. In this study, the phytotoxic and genotoxic effects of RR 141 dye on mung bean seedlings (Vigna radiata (L.) Wilczek) were investigated, serving as a model for potential harm to plant systems.

METHODS AND RESULTS

Short-term (14 days) and long-term (60 days) experiments in paddy soil pot culture exposed mung bean seedlings to RR 141 dye. The dye delayed germination and hindered growth, significantly reducing germination percentage and seedling vigor index (SVI) at concentrations of 50 and 100 ml/L. In short-term exposure, plumule and radical lengths dose-dependently decreased, while long-term exposure affected plant length and grain weight, leaving pod-related parameters unaffected. To evaluate genotoxicity, high annealing temperature-random amplified polymorphic DNA (HAT-RAPD) analysis was employed with five RAPD primers having 58-75% GC content. It detected polymorphic band patterns, generating 116 bands (433 to 2857 bp) in plant leaves exposed to the dye. Polymorphisms indicated the appearance/disappearance of DNA bands in both concentrations, with decreased genomic template stability (GTS) values suggesting DNA damage and mutation.

CONCLUSION

These findings demonstrate that RR 141 dye has a significant impact on genomic template stability (GTS) and exhibits phytotoxic and genotoxic responses in mung bean seedlings. This research underscores the potential of RR 141 dye to act as a harmful agent within plant model systems, highlighting the need for further assessment of its environmental implications.

Streptomyces spp. as biocatalyst sources in pulp and paper and textile industries: Biodegradation, bioconversion and valorization of waste

Complex polymers represent a challenge for remediating environmental pollution and an opportunity for microbial-catalysed conversion to generate valorized chemicals. Members of the genus Streptomyces are of interest because of their potential use in biotechnological applications. Their versatility makes them excellent sources of biocatalysts for environmentally responsible bioconversion, as they have a broad substrate range and are active over a wide range of pH and temperature. Most Streptomyces studies have focused on the isolation of strains, recombinant work and enzyme characterization for evaluating their potential for biotechnological application. This review discusses reports of Streptomyces-based technologies for use in the textile and pulp-milling industry and describes the challenges and recent advances aimed at achieving better biodegradation methods featuring these microbial catalysts. The principal points to be discussed are (1) Streptomyces' enzymes for use in dye decolorization and lignocellulosic biodegradation, (2) biotechnological processes for textile and pulp and paper waste treatment and (3) challenges and advances for textile and pulp and paper effluent treatment.

Decolorization, degradation and detoxification of mutagenic dye Methyl orange by novel biofilm producing plant growth-promoting rhizobacteria

Discharge of untreated dyeing wastewater nearby water-bodies is one of major causes of water pollution. Generally, bacterial strains isolated from industrial effluents and/or contaminated soils are used for the bioremediation of Methyl orange (MO), a mutagenic recalcitrant mono-azo dye, used in textiles and biomedical. However, MO degradation by biofilm producing plant growth-promoting rhizobacteria (BPPGPR) was not studied yet. In this study, 19 out of 21 BPPGPR strains decolorized 96.3-99.9% and 89.5-96.3% MO under microaerophilic and aerobic conditions, respectively from Luria-Bertani broth (LBB) followed by yeast-extract peptone and salt-optimized broth plus glycerol media within 120 h of incubation at 28 °C. Only selected BPPGPR including Pseudomonas fluorescens ESR7, P. veronii ESR13, Stenotrophomonas maltophilia ESR20, Staphylococcus saprophyticus ESD8, and P. parafulva ESB18 were examined for process optimization of MO decolorization using a single factor optimization method. This study showed that under optimal conditions (e.g., LBB, 100 mg L-1 MO, pH 7, incubation of 96 h, 28 °C), these strains could remove 99.1-99.8% and 97.6-99.5% MO under microaerophilic and aerobic conditions, respectively. Total azoreductase and laccase activities responsible for biodegradation were also remarkably activated in the biodegraded samples under optimal conditions, while these activities were repressed under unfavorable conditions (e.g., 40 °C and 7.5% NaCl). This study confirmed that MO was degraded and detoxified by these bacterial strains through breakage of azo bond. So far, this is the first report on bioremediation of MO by the BPPGPR strains. These BPPGPR strains are highly promising to be utilized for the bioremediation of dyeing wastewater in future.

Oxidoreductase enzymes: Characteristics, applications, and challenges as a biocatalyst

Oxidoreductases are enzymes with distinctive characteristics that favor their use in different areas, such as agriculture, environmental management, medicine, and analytical chemistry. Among these enzymes, oxidases, dehydrogenases, peroxidases, and oxygenases are very interesting. Because their substrate diversity, they can be used in different biocatalytic processes by homogeneous and heterogeneous catalysis. Immobilization of these enzymes has favored their use in the solution of different biotechnological problems, with a notable increase in the study and optimization of this technology in the last years. In this review, the main structural and catalytical features of oxidoreductases, their substrate specificity, immobilization, and usage in biocatalytic processes, such as bioconversion, bioremediation, and biosensors obtainment, are presented.

Decolorization of various dyes by microorganisms and green-synthesized nanoparticles: current and future perspective

Various types of colored pigments have been recovered naturally from biological sources including shells, flowers, insects, and so on in the past. At present, such natural colored substances (dyes) are replaced by manmade dyes. On the other hand, due to their continuous usage in various purpose, these artificial dyes or colored substances persist in the environmental surroundings. For example, industrial wastewater contains diverse pollutant substances including dyes. Several of these (artificial dyes) were found to be toxic to living organisms. In recent times, microbial-based removal of dye(s) has gained more attention. These methods were relatively inexpensive for eliminating such contaminants in the environmental system. Hence, various researchers were isolated microbes from environmental samples having the capability of decolorizing synthetic dyes from industrial wastewater. Furthermore, the microorganisms which are genetically engineered found higher degradative/decolorize capacity to target compounds in the natural environs. Very few reviews are available on specific dye treatment either by chemical treatments or by bacteria and/or fungal treatments. Here, we have enlightened literature reports on the removal of different dyes in microbes like bacteria (including anaerobic and aerobic), fungi, GEM, and microbial enzymes and also green-synthesized nanoparticles. This up-to-date literature survey will help environmental managements to co-up such contaminates in nature and will help in the decolorization of dyes.

Biodegradation and reduction of toxicity of Azo Trypan Blue dye by Amazonian strains of gasteroid fungi (Basidiomycota)

Amazonian strains of Cyathus spp. and Geastrum spp. were studied for the ability to discolor the trypan blue azo dye and reduce its toxicity. Discoloration of trypan blue dye (0.05%) was evaluated in solid and aqueous medium over different periods. The reduction of dye toxicity after treatment was assessed by seed germination and the development of lettuce seedlings (Lactuca sativa L.) and toxicity test in Artemia salina (L.) larvae. All evaluated strains showed the potential to reduce the color intensity of trypan blue dye. Cyathus strains reached 96% discoloration, and C. albinus and C. limbatus also reduced dye toxicity. Geastrum strains showed a high efficiency degree in color reduction, reaching 98% discoloration, however, the by-products generated during the process presented toxicity and require further investigation. For the first time, Amazonian strains of gasteroid fungi degrading trypan blue are reported, some even reducing its toxicity. Thus, making them promising sources of enzymes of interest to bioremediation scenarios involving synthetic dyes.

Recent Strategies for the Remediation of Textile Dyes from Wastewater: A Systematic Review

The presence of dye in wastewater causes substantial threats to the environment, and has negative impacts not only on human health but also on the health of other organisms that are part of the ecosystem. Because of the increase in textile manufacturing, the inhabitants of the area, along with other species, are subjected to the potentially hazardous consequences of wastewater discharge from textile and industrial manufacturing. Different types of dyes emanating from textile wastewater have adverse effects on the aquatic environment. Various methods including physical, chemical, and biological strategies are applied in order to reduce the amount of dye pollution in the environment. The development of economical, ecologically acceptable, and efficient strategies for treating dye-containing wastewater is necessary. It has been shown that microbial communities have significant potential for the remediation of hazardous dyes in an environmentally friendly manner. In order to improve the efficacy of dye remediation, numerous cutting-edge strategies, including those based on nanotechnology, microbial biosorbents, bioreactor technology, microbial fuel cells, and genetic engineering, have been utilized. This article addresses the latest developments in physical, chemical, eco-friendly biological and advanced strategies for the efficient mitigation of dye pollution in the environment, along with the related challenges.

Meta-genome analysis of a newly enriched azo dyes detoxification halo-thermophilic bacterial consortium

Treating textile wastewaters were always inhibited by its higher salt concentration and temperature. In this study, a halo-thermophilic bacterial consortium YM was enriched with ability to decolorize acid brilliant scarlet GR (ABS) at 55 °C and 10% salinity. Under optimum conditions of pH (8), temperature (55 °C), and salinity (10%), YM decolorized 97% of ABS under anaerobic conditions. Alteribacillus was identified to be the dominant genus in consortium YM. Consortium YM showed significant decolorization ability under a wide range of salinity (1%-10%), pH (7-9) and temperature (45 °C-60 °C). The degradation pathway of ABS was proposed by the combination of UV-vis spectral analysis, Fourier transform infrared (FTIR), gas chromatography mass spectrometric (GC-MS), and metagenomic analysis. Azoreductase, which was an important enzyme in decolorization process, was identified with great variation in the genome of consortium YM. Meanwhile, the metabolic intermediates after decolorization was identified with low biotoxicity by phytotoxicity tests. This study first identified that Alterbacillus play an important role in azo dye decolorization and degradation process under halo-thermophlic conditions and provided significant knowledge for azo dye decolorization and degradation process.

Mathematical modeling for operative improvement of the decoloration of Acid Red 27 by a novel microbial consortium of Trametes versicolor and Pseudomonas putida: A multivariate sensitivity analysis

In this work, it is presented a first approach of a mathematical and kinetic analysis for improving the decoloration and further degradation process of an azo dye named acid red 27 (AR27), by means of a novel microbial consortium formed by the fungus Trametes versicolor and the bacterium Pseudomonas putida. A multivariate analysis was carried out by simulating scenarios with different operating conditions and developing a specific mathematical model based on kinetic equations describing all stages of the biological process, from microbial growth and substrate consuming to decoloration and degradation of intermediate compounds. Additionally, a sensitivity analysis was performed by using a factorial design and the Response Surface Method (RSM), for determining individual and interactive effects of variables like, initial glucose concentration, initial dye concentration and the moment in time for bacterial inoculation, on response variables assessed in terms of the minimum time for: full decoloration of AR27 (R1 = 2.375 days); maximum production of aromatic metabolites (R2 = 1.575 days); and full depletion of aromatic metabolites (R3 = 12.9 days). Using RSM the following conditions improved the biological process, being: an initial glucose concentration of 20 g l-1, an initial AR27 concentration of 0.2 g l-1 and an inoculation moment in time of P. putida at day 1. The mathematical model is a feasible tool for describing AR27 decoloration and its further degradation by the microbial consortium of T. versicolor and P. putida, this model will also work as a mathematical basis for designing novel bio-reaction systems than can operate with the same principle of the described consortium.

Combined disposal of methyl orange and corn straw via stepwise adsorption-biomethanation-composting

Agriculture wastes have been proved to be the potential adsorbents to remove azo dye from textile wastewater, but the post-treatment of azo dye loaded agriculture waste is generally ignored. A three-step strategy including sequential adsorption-biomethanation-composting was developed to realize the co-processing of azo dye and corn straw (CS). Results showed that CS represented a potential adsorbent to remove methyl orange (MO) from textile wastewater, with the maximum MO adsorption capacity of 10.00 ± 0.46 mg/g, deriving from the Langmuir model. During the biomethanation, CS could serve as electron donor for MO decolorization and substrate for biogas production simultaneously. Though the cumulative methane yield of CS loaded with MO was 11.7 ± 2.28% lower than that of blank CS, almost complete de-colorization of MO could be achieved within 72 h. Composting could achieve the further degradation of aromatic amines (intermediates during the degradation of MO) and decomposition of digestate. After 5 days' composting, 4-aminobenzenesulfonic acid (4-ABA) was not detectable. The germination index (GI) also indicated that the toxicity of aromatic amine was eliminated. The overall utilization strategy gives novel light on the management of agriculture waste and textile wastewater.

Pineapple wastewater as co-substrate in treating real alkaline, non-biodegradable textile wastewater using biogranulation technology

This study was to develop biogranules using a sequencing batch reactor (SBR) and to evaluate the effect of pineapple wastewater (PW) as a co-substrate for treating real textile wastewater (RTW). The biogranular system cycle was 24 h (2 stages of phase), with an anaerobic phase (17.8 h) followed by an aerobic phase (5.8 h) for every stage of the phase. The concentration of pineapple wastewater was the main factor studied in influencing COD and color removal efficiency. Pineapple wastewater with different concentrations (7, 5, 4, 3, and 0% v/v) makes a total volume of 3 L and causes the OLRs to vary from 2.90 to 0.23 kg COD/m3day. The system achieved 55% of average color removal and 88% of average COD removal at 7%v/v PW concentration during treatment. With the addition of PW, the removal increased significantly. The experiment on the treatment of RTW without any added nutrients proved the importance of co-substrate in dye degradation.

Fluorescent fiber-optic device sensor based on carbon quantum dot (CQD) thin films for dye detection in water resources

Industrialization, especially in textile industries, has led to increased use of dyes and pigments to impart colours to fabrics. Textile dyes are one of the chief emerging pollutants of water resources as industrial effluents. In the current research, we report the development and utilization of pH-sensitive carbon quantum dots (CQDs) immobilized in polymer thin films acting as sensors for textile dye detection. The CQDs and CQD-containing polymer films were characterized by various techniques like XRD, TEM, XPS, and CLSM. The synthesized CQD thin films possess a unique pH-sensitive property that can be used to detect various model acidic and basic dyes that are important components of industrial effluents from textile dyes. The detection capability of the sensor films was evaluated by spiking dyes in various water matrices, like household tap water and river water. The results indicate that pH-sensitive CQD thin film was able to detect three acidic dyes, namely methyl red, methyl orange, and bromocresol green, and one basic dye, methylene blue, in a linear range of 0-100 μM with a response time of 1 minute. The CQD thin-film sensors have a limit of detection of 26.4 ppb, 214.5 ppb, 46.2 ppb, and 29.7 ppb for methyl red, methyl orange, bromocresol green and methylene blue, respectively. The accuracy of detection performed by spiking studies in water resources indicated an ∼100% recovery value in all tested acidic and basic dyes. The sensor films were compared for analytical parameters using UV-visible-fluorescence spectroscopy and HPLC.

O, Asma K.A.A A, Eida Mohammad A, Ali Khan MW. Optimization of Pseudomonas aeruginosa isolated for bioremediation from Ha'il region of Saudi Arabia

Majority of dyes are toxic to all the living organisms and inherently resistant to microbial degradation. Hence, decolorization and degradation of textile dye methyl red were evaluated using isolated bacterial strain Pseudomonas aeruginosa (P. aeruginosa). Methyl red dye decolorization by P. aeruginosa with respect to various parameters was optimized. Data shows that maximum possible decolorization was seen at 50 ppm dye concentration, 1400 mg/l glucose concentration, 700 mg/l sodium chloride (NaCl) concentration, pH 9, temperature 38°C, 1000 mg/l urea concentration P. aeruginosa AM-1 strain. The highest percent (91.1%) of bioremediation was achieved at 40 ppm dye concentration in Allium cepa test. These findings suggest P. aeruginosa strain (AM-1) has the potential to be used in the biological treatment of highly toxic dye which is main constituent of dyeing mill effluents due to its high decolorization activity with simple conditions. Strain AW-1 strain also has potential to bioremediate other wastewater containing methyl red dye.

Optimising Wastewater Treatment: Acinetobacter sp. IrC1 as a potential multi-resistant bacterium for copper accumulation and dyes decolourisation

Improper disposal of waste containing copper and dye is an environmental issue that must be resolved immediately due to its harmful, non-degradable and toxic properties. Bioremediation efficiency can improve by cultivating copper and dye multi-resistant bacteria to remove various pollutant types simultaneously. This study aims at establishing the multi-resistance of Acinetobacter sp. IrC1 to copper and dyes. The effects of copper concentration on growth were determined using a spectrophotometer, while accumulation was analysed using an atomic absorption spectrophotometer. Bacteria-mediated dye decolourisation dyes were observed based on clear zone formation around bacterial colonies, while decolourisation percentage was calculated using a spectrophotometer. Results demonstrate that Acinetobacter sp. IrC1 resisted up to 8 mM CuSO4 and accumulated up to 292.93 mg/g dry weight of copper cells. Acinetobacter sp. IrC1 isolates were also resistant to 500 ppm Methylene Blue, Malachite Green, Congo Red, Mordant Orange, Reactive Black, Direct Yellow, Reactive Orange, Remazol, Wantex Red and Wantex Yellow dye, successfully removing up to 68.35% and 79.50% Methylene Blue and Basic Fuchsine in a medium containing 3 mM CuSO4, respectively. Further investigations are required to analyse the genetic composition of multi-resistant bacteria to optimise the effectiveness of indigenous bacterial isolates as bioremediation agents.

Facile Synthesis of Hybrid Nanoflowers Using Glycine and Phenylalanine and Investigation of Their Catalytic Activity

In the context of the proposed work, two different amino acids (Glycine, Phenylalanine) have interacted with copper ions in a phosphate buffer (PBS) in place of enzymes. This interaction resulted in the nucleation of copper phosphate crystals and the formation of flower-shaped amino acid-copper hybrid nanostructures (AA-hNFs), which grew through self-assembly. While Cu (II) ions in the structure of AA-hNFs were used as Fenton's agent for the catalytic activity. SEM, energy dispersive X-ray spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy measurements were used to define the AA-hNFs' characterisation. The peroxidase-like activities of AA-hNFs were investigated by UV/VIS spectrophotometer. Metal nanoparticles have peroxidase-like activity. A class of enzymes known as peroxidases is able to catalyze the conversion of hydrogen peroxide into hydroxyl radicals. These radicals also take part in electron transfers with substrates, which results in color during oxidation. When cupric oxide nanoparticles are added to the peroxidase substrate while H2 O2 is present, a blue color product with a maximum absorbance at=652 nm can result, demonstrating the catalytic activity of a peroxidase. The morphology and composition of AA-hNFs were carefully characterized and the synthesized parameters were optimized systematically. Results showed that the nanoparticles were dispersed with an average diameter of 7-9 μm and indicated a uniform flower shape. The results of the investigation are anticipated to significantly advance a number of technical and scientific sectors.

Assessment of drying conditions for storage of a yeast-based decolorization solution for application in textile industrial wastewater treatment plants

The textile industry produces harmful effluents that are discharged into the environment, damaging the aquatic and other ecosystems. A yeast-based solution for decolorization of textile industrial wastewater was produced and evaluated. Three yeast strains, Candida parapsilosis (HOMOGS20B), Yarrowia lipolytica (HOMOGST27AB) and Candida pseudoglaebosa (LIIIS36B), isolated from a textile wastewater treatment plant and previously selected for their dye decolorization capacity, were freeze-dried. Additionally, Yarrowia lipolytica (HOMOGST27AB) was also spray-dried. Skim milk powder and maltodextrin were used as cell protectors, and the freeze-dried products were stored at cold (4 °C) and room temperature for 210 days. The viability of the yeast cells and their decolorization capacity over time were assessed. Dried yeast cells maintained their viability, and decolorization capacity for at least 90 days of storage after spray- and freeze-drying with both cell-protecting agents. The dried yeast-based solution for decolorizing textile industrial wastewater combines stability, efficiency, and convenience of production for application in real industrial facilities.

Sequential photo electro oxidation and biodegradation of textile effluent: Elucidation of degradation mechanism and bacterial diversity

Textile effluent contains a highly toxic and refractory azo dyes. Eco-friendly method for efficient decolorization and degradation of textile effluent is essential. In the present study, treatment of textile effluent was carried through sequential electro oxidation (EO) and photo electro oxidation (PEO) using RuO₂-IrO₂ coated titanium electrode as an anode and cathode followed by biodegradation. The pre-treatment of textile effluent by photo electro oxidation for 14 h exhibited 92% of decolorization. Subsequent biodegradation of the pre-treated textile effluent enhanced the reduction of chemical oxygen demand to 90%. Metagenomics results exhibited that Flavobacterium, Dietzia, Curtobacterium, Mesorhizobium, Sphingobium, Streptococcus, Enterococcus, Prevotellaand Stenotrophomonas bacterial communities majorly involved in the biodegradation of textile effluent. Hence, integrating sequential photo electro oxidation and biodegradation proposed an efficient and eco-friendly approach for treating textile effluent.

Effect of Sublethal Concentrations of Zinc Oxide Nanoparticles on Bacillus cereus

Zinc oxide nanoparticles (ZnONPs), which are produced on a large scale, pose a potential threat to various environments because they can interact with the microbial populations found in them. Bacteria that are widespread in soil, water, and plant material include the Bacillus cereus group, which plays an important role in biodegradation and the nutrient cycle and is a major factor determining ecological balance. This group includes, among others, the foodborne pathogen B. cereus sensu stricto (herein referred to as B. cereus). The aim of this study was a comprehensive assessment of the effects of commercially available ZnONPs on B. cereus. The MIC (minimum inhibitory concentration) for B. cereus was 1.6 mg/mL, and the MBC (minimum bactericidal concentration) was 1.8 mg/mL. Growth of B. cereus was inhibited by a concentration of ZnONPs lower than or equal to MIC50. Concentrations from 0.2 to 0.8 mg/mL inhibited the growth of these bacteria in liquid media, induced symptoms of oxidative stress, and stimulated an environmental stress response in the form of biofilm and endospore formation. In addition, ZnONPs negatively affected the ability of the bacteria to break down the azo dye Evans Blue but enhanced the antimicrobial properties of phenolic compounds. Sublethal concentrations of ZnONPs generally decreased the activity of B. cereus cells, especially in the presence of phenolics, which indicates their potential toxicological impact, but at the same time they induced universal defence responses in these cells, which in the case of potential pathogens can hinder their removal.

Removal of Erythrosine B dye from wastewater by Penicillium italicum: experimental, DFT, and molecular docking studies

The study involved the adsorption of Erythrosine B onto the dead, dry, and unmodified Penicillium italicum cells and the analytical, visual, theoretical assessment of the adsorbent-adsorbate interactions. It also included desorption studies and reiterative usability of the adsorbent. The fungus was a local isolate and it was identified by partial proteomic experiment in a MALDI-TOFF mass spectrometer. Chemical features of the adsorbent surface were analysed by FT-IR and EDX. Surface topology was visualized by SEM. Isotherm parameters of the adsorption were determined by using three most frequently used models. Erythrosine B appeared to form a monolayer onto the biosorbent and some of the dye molecules could have also penetrated into the adsorbent particles. Kinetic results suggested a spontaneous and exothermic reaction taken place between the dye molecules and the biomaterial. Theoretical approach involved the determination of some of the quantum parameters as well as the toxic or drug potentials of the some of the components of the biomaterial.

Bioremediation of reactive orange 16 by industrial effluent-adapted bacterial consortium VITPBC6: process optimization using response surface methodology (RSM), enzyme kinetics, pathway elucidation, and detoxification

Textile effluent is one of the most hazardous industrial pollutant sources. It is generated in huge volumes and contains a wide array of toxicants. Reactive azo dyes, which are xenobiotic compounds, are predominantly utilized by textile industries for dyeing cotton, viscose, wool, and silk. The conventional physicochemical treatments used by industrial effluent treatment plants are ineffective in dye degradation. The present study thus attempted to find a potential treatment for reactive azo dyes. A novel bacterial consortium VITPBC6 was constructed with the most potent and compatible reactive orange 16 (RO-16) decolorizing isolates of tannery and textile effluents, and the isolates were identified as Bacillus flexus VITSP6, Bacillus paraflexus VITSPB7, Bacillus megaterium VITSPB9, Bacillus firmus VITEPB1, B. flexus VITEPB2, and Bacillus aryabhattai VITEPB3. The physicochemical factors of RO-16 decolorization were optimized by response surface methodology. Consortium VITPBC6 was able to tolerate a high concentration of RO-16 up to 800 mg L^-1. A cocktail of enzymes including azoreductase, tyrosinase, laccase, lignin peroxidase, and manganese peroxidase was involved in RO-16 degradation by VITPBC6. Consortium VITPBC6 degraded RO-16 following zero-order reaction. The enzymes of consortium VITPBC6 had a V_max of 352 mg L^-1 day^-1 for RO-16 degradation; however, the K_m value was high. VITPBC6 biodegraded RO-16 resulting in the formation of small aromatic compounds. Lastly, different toxicity assays conducted with untreated RO-16 and its corresponding biodegraded metabolite revealed that the toxicity of biodegraded metabolites was significantly lower than the untreated dye.

Insights into the decolorization of mono and diazo dyes in single and binary dyes containing wastewater and electricity generation in up-flow constructed wetland coupled microbial fuel cell

The treatment of single and binary azo dyes, as well as the effect of the circuit connection, aeration, and plant on the performance of UFCW-MFC, were explored in this study. The decolorization efficiency of Remazol Yellow FG (RY) (single dye: 98.2 %; binary dye: 92.3 %) was higher than Reactive Black 5 (RB5) (single: 92.3 %; binary: 86.7 %), which could be due to monoazo dye (RY) requiring fewer electrons to break the azo bond compared to the diazo dye (RB5). In contrast, the higher decolorization rate of RB5 in binary dye indicated the removal rate was affected by the electron-withdrawing groups in the dye structure. The closed circuit enhanced about 2% of color and 4% of COD removal. Aeration improved the COD removal by 6%, which could be contributed by the mineralization of intermediates. The toxicity of azo dyes was reduced by 11-26% and the degradation pathways were proposed. The dye removal by the plants was increased with a higher contact time. RB5 was more favorable to be uptook by the plant as RB5 holds a higher partial positive charge. 127.39 (RY), 125.82 (RB5), and 58.66 mW/m³ (binary) of maximum power density were generated. The lower power production in treating the binary dye could be due to more electrons being utilized for the degradation of higher dye concentration. Overall, the UFCW-MFC operated in a closed circuit, aerated, and planted conditions achieved the optimum performance in treating binary azo dyes containing wastewater (dye: 87-92%; COD: 91%) compared to the other conditions (dye: 83-92%; COD: 78-87%).

Phycoremediation for carbon neutrality and circular economy: Potential, trends, and challenges

Phycoremediation is gaining attention not only as a pollutant mitigation approach but also as one of the most cost-effective paths to achieve carbon neutrality. When compared to conventional treatment methods, phycoremediation is highly effective in removing noxious substances from wastewater and is inexpensive, eco-friendly, abundantly available, and has many other advantages. The process results in valuable bioproducts and bioenergy sources combined with pollutants capture, sequestration, and utilization. In this review, microalgae-based phycoremediation of various wastewaters for carbon neutrality and circular economy is analyzed scientometrically. Different mechanisms for pollutants removal and resource recovery from wastewaters are explained. Further, critical parameters that influence the engineering design and phycoremediation performance are described. A comprehensive knowledge map highlighting the microalgae potential to treat a variety of industrial effluents is also presented. Finally, challenges and future prospects for industrial implementation of phycoremediation towards carbon neutrality coupled with circular economy are discussed.

Biofilm-mediated decolorization, degradation and detoxification of synthetic effluent by novel biofilm-producing bacteria isolated from textile dyeing effluent

Biofilm-mediated bioremediation of xenobiotic pollutants is an environmental friendly biological technique. In this study, 36 out of 55 bacterial isolates developed biofilms in glass test tubes containing salt-optimized broth plus 2% glycerol (SOBG). Scanning electron microscopy, Fourier transform infrared (FTIR) spectroscopy, and Congo red- and Calcofluor binding results showed biofilm matrices contain proteins, curli, nanocellulose-rich polysaccharides, nucleic acids, lipids, and peptidoglycans. Several functional groups including -OH, N-H, C-H, CO, COO^-, -NH_2, PO, C-O, and C-C were also predicted. By sequencing, ten novel biofilm-producing bacteria (BPB) were identified, including Exiguobacterium indicum ES31G, Kurthia gibsonii ES43G, Kluyvera cryocrescens ES45G, Cedecea lapagei ES48G, Enterobacter wuhouensis ES49G, Aeromonas caviae ES50G, Lysinibacillus sphaericus ES51G, Acinetobacter haemolyticus ES52G, Enterobacter soli ES53G, and Comamonas aquatica ES54G. The Direct Red (DR) 28 (a carcinogenic and mutagenic dye used in dyeing and biomedical processes) decolorization process was optimized in selected bacterial isolates. Under optimum conditions (SOBG medium, 75 mg L^-1 dye, pH 7, 28 °C, microaerophilic condition and within 72 h of incubation), five of the bacteria tested could decolorize 97.8% ± 0.56-99.7% ± 0.45 of DR 28 dye. Azoreductase and laccase enzymes responsible for biodegradation were produced under the optimum condition. UV-Vis spectral analysis revealed that the azo (-NN-) bond peak at 476 nm had almost disappeared in all of the decolorized samples. FTIR data revealed that the foremost characteristic peaks had either partly or entirely vanished or were malformed or stretched. The chemical oxygen demand decreased by 83.3-91.3% in the decolorized samples, while plant probiotic bacterial growth was indistinguishable in the biodegraded metabolites and the original dye. Furthermore, seed germination (%) was higher in the biodegraded metabolites than the parent dye. Thus, examined BPB could provide potential solutions for the bioremediation of industrial dyes in wastewater.

Nanomaterials as a Sustainable Choice for Treating Wastewater: A Review

The removal of dyes from textile effluents utilizing advanced wastewater treatment methods with high efficiency and low cost has received substantial attention due to the rise in pollutants in water. The purpose of this work is to give a comprehensive analysis of the different treatments for removing chemical dyes from textile effluents. The capability and potential of conventional treatments for the degradation of dyeing compounds in aqueous media, as well as the influence of multiple parameters, such as the pH solution, initial dye concentration, and adsorbent dose, are presented in this study. This study is an overview of the scientific research literature on this topic, including nanoreductive and nanophotocatalyst processes, as well as nanoadsorbents and nanomembranes. For the purpose of treating sewage, the special properties of nanoparticles are currently being carefully researched. The ability of nanomaterials to remove organic matter, fungus, and viruses from wastewater is another benefit. Nanomaterials are employed in advanced oxidation techniques to clean wastewater. Additionally, because of their small dimensions, nanoparticles have a wide effective area of contact. Due to this, nanoparticles' adsorption and reactivity are powerful. The improvement of nanomaterial technology will be beneficial for the treatment of wastewater. This report also offers a thorough review of the distinctive properties of nanomaterials used in wastewater treatment, as well as their appropriate application and future possibilities. Since only a few types of nanomaterials have been produced, it is also important to focus on their technological feasibility in addition to their economic feasibility. According to this study, nanoparticles (NPs) have a significant adsorption area, efficient chemical reactions, and electrical conductivity that help treat wastewater effectively.

Wastewater reclamation trends in Thailand

Thailand constantly faces the problem of water scarcity, resulting from an imbalance between available water supply and increasing water demand for economic and community expansion, as well as climate change. To address this shortage, wastewater reclamation is being planned and implemented throughout the country, along with a 20-year, long-term integrated water resource management plan. Significant opportunities from municipal wastewater treatment plants (WWTPs) are dependent on the following factors: the establishment of a reuse water framework and a tangible target for treated wastewater set by local government authorities; widespread recognition and adaptation of wastewater reuse measures in the agriculture, industry, tourism and service sectors regarding climate change and water stress; and the implementation of joint investment water reuse projects between private and government agencies. However, wastewater reclamation faces some significant challenges, specifically: the limitations of regulation and monitoring for specific reuse purposes; a lack of public confidence in the water quality; the limited commercial development of reclaimed wastewater research; and difficulties in self-sustaining business models through adapting circular economy principles. This study aims to provide an overview of the wastewater reclamation, present research trends, currently operating WWTPs as well as opportunities and challenges to speed up water reuse activities in Thailand.

Biodegradation of textile dye Rhodamine-B by Brevundimonas diminuta and screening of their breakdown metabolites

The carcinogenic Rhodamine-B dye is recalcitrant which could cause serious hazards to human beings. Degradation with the application of unique bacterial strain is a sustainable technique. The bioremediation technique showed great potential to degrade a variety of recalcitrant pollutants like dyes. In this study, Brevundimonas diminuta, was selected for the breakdown of toxic textile dye Rhodamine-B. This bacterium showed 90-95% of degradation at the optimum conditions like 10 mg L^-1 of concentration of dye, pH 7 and temperature of 30 °C. Further UV-Visible spectrophotometry, FT-IR spectral scan, GC-MS analysis depicted the breakdown products like Methyl 18-fluoro-octadec-9-enoate, Methyl 18-fluoro-octadec-9-enoate and d-Homo-24-nor-17-oxachola-20,22-diene-3,16-dione,7-(acetyloxy)-1, 23 tri-epoxy-4,4,8-trimethyl. The degradation was confirmed by the changes in the functional groups, change in molecular weight and charge to-mass ratio. These results suggested that this strain is a deserving organism for the degradation of dye compounds.