Physicochemical properties of whole wheat flour as affected by gamma irradiation

Valorisation of apple pomace for the development of high-fibre and polyphenol-rich wheat flour cookies

Apple pomace, abundant in dietary fibre and polyphenols, often goes unutilized, contributing to environmental pollution as it is discarded in open fields of Jammu and Kashmir. This study aimed to develop functional cookies fortified with apple pomace powder (APP), an industrial by-product. Wheat flour-APP formulations (0%, 5%, 10%, and 15%) were assessed. APP addition notably affected color values and functional properties, enhancing water and oil absorption capacities, swelling power, foam capacity and stability. Phenolic content increased significantly (p < 0.05) post-fortification, elevating antioxidant properties. FT-IR spectroscopy identified distinctive chemical components in wheat flour and APP. Sensory evaluation favored cookies with 10% APP, indicating their potential for consumer acceptance. Thus, APP shows promise for producing innovative functional cookies, improving consumer health, utilizing industrial by-products, and reducing waste from apple processing plants, thereby mitigating environmental pollution.

Heat moisture treatment and ultrasound-induced hydrothermal wheat starch modification: Techno-functional, microstructural and quality 3D printed characteristics

In this study, the effect of hydrothermal process, ultrasound and combined freezing-ultrasound process on the physical and structural characteristics of wheat starch (Triticum aestivum) was investigated. Two heat-moisture treatments for 2 h (HMT2) and 4 h (HMT4), high-intensity, high-frequency ultrasound under two treatment times (10 to 20 min) (UT10 and UT20) as pre-treatment and sonication after freezing as post-treatment (FUT) on wheat starch suspension was applied. The modifications of starch crystallinity, chemical bonds of starch treated, morphology, thermal, swelling, pasting, and physicochemical characteristics were evaluated. Finally, the starches treated under these conditions were used as ink for a 3D printer, and the characteristics of the printed product were evaluated. The results demonstrate that heat-moisture modified starch increased swelling and size of granules and lowered syneresis values. Sonication promoted molecular depolymerization and reduction of starch swelling and crystallinity. Combined treatment (Sonication and freezing) showed higher peak apparent viscosity during gelatinization and pasting, and the FUT starch-based hydrogels showed the best printability (better ability to stack layers on top of each other and build the desired 3D shape), indicating better reproducibility of this ink. These results showed that FUT is a suitable process for improving the synergy and properties of wheat starch-based hydrogels, which are suitable as inks for use in 3D printers.

Heat-moisture treatment can modulate all-purpose wheat flour for short dough biscuit making: Evidences and mechanism

In view of the merits of all-purpose wheat flour (APWF) to soft wheat flour (SWF) in cost and protein supply, the feasibility of heat-moisture treatment (HMT, 19% moisture for 1 h at 60, 80 and 100 °C, respectively) to modify APWF as a substitute SWF in making short dough biscuits was explored. For underlying mechanisms, on the one hand, HMT reduced the hydration capacity of damaged starch particles by coating them with denatured proteins. On the other hand, HMT at 80 °C and 100 °C significantly denatured gluten proteins to form protein aggregates, highly weakening the gluten network in dough. These two aspects jointly conferred APWF dough with higher deformability and therefore significantly improved the qualities of biscuits. Moreover, the qualities of biscuits from APWF upon HMT-100 °C were largely comparable to that from SWF, even higher values were concluded in spread ratio, volume, specific volume and consumer acceptance.

Effect of Soy Wax/Rice Bran Oil Oleogel Replacement on the Properties of Whole Wheat Cookie Dough and Cookies

This study investigated the replacement of butter with soy wax (SW)/rice bran oil (RBO) oleogel in varied proportions in cookie dough and the resulting cookies. The study mainly evaluates the physical, textural, and chemical properties of the butter cookie dough and cookies by replacing butter with SW/RBO oleogel. The dough was assessed using moisture analysis, microscopy, FTIR Spectroscopy (Fourier Transform Infrared) and impedance spectroscopies, and texture analysis. Micrographs of the dough showed that D-50 (50% butter + 50% oleogel) had an optimal distribution of water and protein. D-0 (control sample containing 100% butter) showed the lowest impedance values. Moisture content ranged between 23% and 25%. FTIR spectroscopy suggested that D-50 exhibited a consistent distribution of water and protein, which CLSM and brightfield microscopy supported. Texture analysis revealed that the dough samples exhibited predominantly fluidic behavior. As the amount of oleogel was raised, the dough became firmer. The prepared cookies showed a brown periphery and light-colored center. Further, a corresponding increase in surface cracks was observed as the oleogel content was increased. Cookies moisture analysis revealed a range between 11 and 15%. Minute changes were observed in the texture and dimensions of the cookies. In summary, it can be concluded that replacing butter with oleogel by up to 50% seems to be feasible without significantly compromising the physicochemical properties of cookie dough and cookies.

Effect of Gamma-irradiation on the Physicochemical, Functional, and Antioxidant Properties of Unpigmented Brown Whole Rice Flour

Whole grain brown rice, being a rich source of fiber and other bioactive compounds like polyphenols is effective in reducing the risk of chronic diseases including cardiovascular diseases, hypercholesterolemia and Type II diabetes. The study was aimed to evaluate the effect of gamma irradiation on the physicochemical, functional and antioxidant properties of whole grain brown rice flour. The brown rice flour was conditioned to two different moisture contents of 10% and 12% and treated with gamma irradiation doses of 0 kGy (native or control), 2.5 kGy and 5 kGy. Moisture, protein, fat, ash and carbohydrate content of native flour was found as 10 g/100 g, 6.54 g/100 g, 1.54 g/100 g, 1.0 g/100 g, and 81.48 g/100 g, respectively. The hunter color 'L', 'a', and 'b' values of the native brown rice flour sample were found as 81.95, -0.97 and 17.36, respectively and were non-significantly (p ≥ 0.05) affected by gamma irradiation. Apparent amylose content was observed to decrease significantly (p ≤ 0.05) from 29.97 to 20.30 g/100 g with the increase in gamma irradiation dose and moisture content. The pasting properties such as peak viscosity, trough viscosity and final viscosity of all the flour samples decreased significantly (p ≤ 0.05) with the increase in irradiation dose. The functional properties such as water and oil absorption and emulsion capacities were increased while emulsion stability and foaming stability decreased upon irradiation. Irradiation led to an overall increase in the antioxidant activity of rice flours. In general, FTIR spectra revealed a decrease in the absorption intensities of the functional groups. Therefore, it can be concluded that gamma irradiation can be used as a tool to modify the physicochemical properties of rice flours as well as to improve their antioxidant properties.

Degradation of Zearalenone by Dielectric Barrier Discharge Cold Plasma and Its Effect on Maize Quality

In this study, a dielectric barrier discharge (DBD) cold plasma was used to degrade zearalenone, and the degradation efficiency and the quality of maize were evaluated. The results showed that the zearalenone degradation rates increased with the increase in voltage and time. When it was treated at 50 KV for 120 s, the degradation percentage of the zearalenone in maize could reach 56.57%. The kinetics’ analysis showed that the degradation followed a first-order reaction. The crude fiber of the maize reduced after the cold plasma treatment. In addition, cold plasma treatment did not significantly change the crude protein content, but slightly changed the fatty acid and color. The changes in maize quality are generally acceptable. DBD cold plasma may be a promising approach to reducing zearalenone in maize.

Effect of annealing using plasma-activated water on the structure and properties of wheat flour

In this study, wheat flour (WF) was modified by annealing (ANN) using plasma-activated water (PAW) for the first time. Compared with WF and DW-WF, the results of scanning electron microscopy (SEM) and particle-size analysis showed that the granule structure of wheat starch in PAW-WF was slightly damaged, and the particle size of PAW-WF was significantly reduced. The results of X-ray diffraction and Fourier transforming infrared spectroscopy indicated that PAW-ANN could reduce the long-range and short-range order degrees of wheat starch and change the secondary structure of the protein in WF, in which the content of random coils and α-helices was significantly increased. In addition, the analysis of solubility, viscosity, and dynamic rheological properties showed that PAW-ANN improved the solubility and gel properties of WF and decreased its viscosity properties and short-term regeneration. PAW-ANN, as a green modification technology, has the potential for further application in WF modification, as well as in the production of flour products.

Development of functional cakes rich in bioactive compounds extracted from saffron and tomatoes

Demand for health-promoting food products rich in bioactive compounds and fibers is increasing. The current study was aimed to evaluate the physicochemical, antioxidant and sensory characteristics of whole wheat flour cakes enriched with tomato powder (TP), crude lycopene (CL) and saffron extracts (SE). Physical characteristics such as loaf weight of cakes containing TP increased significantly (p < 0.05) while loaf volume decreased as compared to the control. The color of the crust and crumb of cakes enriched with TP and CL was dark red while cakes containing SE were bright and yellowish. Firmness of the fresh cake samples was found in the range of 7.25-14.53 N. Antioxidant properties were significantly (p < 0.05) improved after enrichment of cakes with TP, CL and SE. The storage period increased the water activity while antioxidant activity and concentration of total carotenoids was reduced. Thus, cakes enriched with TP, CL and SE could be successfully developed with improved antioxidant properties, without compromising the sensory quality of the product.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-021-05267-2.

Novel nonthermal food processing practices: Their influences on nutritional and technological characteristics of cereal proteins

Cereals, as the main crops cultivated and consumed in the world, are a rich source of carbohydrates, proteins, dietary fiber, and minerals. Despite the nutritional importance, their technological applicability in food matrices is also considerably important to be determined. Cereal processing is done to achieve goals as increasing the shelf-life, obtaining the desired technological function, and enhancing the nutritional value. Nonthermal processing is preferred regarding its potential to provide beneficial impacts with minimum adverse effect. Technological functionality and nutritional performance are considered as the most basic challenges through cereal processing, with proteins as the main factor to take part in such roles. Technological and nutritional functionalities of proteins have been found to be changed through nonthermal processing, which is generally attributed to conformational and structural changes. Therefore, this study is aimed to investigate the impact of nonthermal processing on nutritional and technological characteristics of cereal proteins.

Influence of replacement of wheat flour by rice flour on rheo-structural changes, in vitro starch digestibility and consumer acceptability of low-gluten pretzels

This study aimed to access the influence of rice flour incorporation on various quality attributes of low-gluten wheat-based pretzels viz., functional, rheological, starch digestibility, color, textural and sensorial properties. Significant increase in swelling power (18.33 ± 0.51) and bulk density (0.58 ± 0.04) was observed in flour blend upon incorporation of rice flour, whereas, significant decrease in oil absorption capacity (0.62 ± 0.09), solubility index (6.72 ± 0.17), foaming capacity (9.67 ± 0.34), and foaming stability (3.39 ± 0.15) was recorded. Pasting properties of samples were studied using a Rapid Visco Analyser which indicated that all the pasting properties increased with an increase in rice flour incorporation. Fourier transform infrared spectroscopic studies revealed no difference in the basic functional groups of flour blend upon the incorporation of rice flour, however, it had a pronounced effect on elastic modulus (G′) of flour blend. In vitro starch digestion characteristics revealed 7.23% surge in slowly digestible starch and 13.36% reduction in rapidly digestible starch of developed low-gluten pretzels upon the incorporation of rice flour. Apparent amylose content (27.3 ± 1.45) and resistant starch content (6.12 ± 0.97) increased and starch digestibility index (69.87 ± 1.72) decreased in developed low-gluten pretzels. In conclusion, the developed low-gluten pretzels had significantly (p < 0.05) higher mineral profile and lightness (L*) and lower breaking strength in addition to having better overall acceptability. This study indicated that substituting wheat flour with rice flour up to a level of 35% affected the quality attributes of developed low-gluten pretzels.

Graphical abstract

The effect of microwave stabilization on the properties of whole wheat flour and its further interpretation by molecular docking

In order to stabilize the whole wheat flour and extend its shelf life, microwave was employed to heat the wheat bran to inactivate the lipase in this paper. The effects of microwave heating of wheat bran on the lipase activities, gluten properties, dough properties and storage stability of the stabilized whole wheat flour, and the quality of steamed bread made of stabilized whole wheat flour were investigated. Furthermore, molecular docking was applied to interpret the mechanism. The results showed that microwave can reduce lipase activity, maintain the quality of whole wheat flour dough and steamed bread, and retard rancidity. The molecular docking results displayed that the conformation of the amino acids chains near the lipase catalytic center changed, which made the substrate difficult to enter the catalytic center and prevented the hydrolysis of the fat substrate.

Effect of Superheated Steam Treatment on the Lipid Stability of Dried Whole Wheat Noodles during Storage

Dried whole wheat noodles (DWWN) are a kind of nutritious convenience food with broad market prospects. However, due to the presence of high content of unsaturated fatty acids (UFAs) and lipid degrading enzymes, the shelf life and edible quality of DWWN are easily affected. This study explored the effect of superheated steam treatment (SST-155 °C-10 s, SST-170 °C-10 s, SST-190 °C-5 s) on the lipid stability of DWWN. The lipase, lipoxygenase and peroxidase of the DWWN treated with superheated steam were completely passivated during storage. After 12 weeks of storage, the fatty acid value of DWWN increased by 35.1, 17.9, 15.9, 24.6 mg NaOH/100 g in the groups of control, SST-155 °C-10 s, SST-170 °C-10 s, SST-190 °C-5 s, respectively; whereas the content of UFAs decreased by 13.5%, 6.8%, 5.4%, and 2.7%, respectively. The content of 2-pentylfuran in the SST-155 °C-10 s, SST-170 °C-10 s, SST-190 °C-5 s group was 0.7, 0.6, and 0.4-fold than that of the control group, respectively. In addition, the total tocopherol and total volatile compounds of the SST-190 °C-5 s group were 2.4 and 0.7-fold than that of the control group, respectively. Therefore, SST should be a new technology that can improve the lipid stability of DWWN.

Effect of superheated steam treatment on the lipid stability of whole wheat flour

This study aimed to investigate the effect of superheated steam treatment (SST) on lipid stability of whole wheat flour (WWF) during storage. After SST, the lipase and peroxidase of WWF were inactivated, and lipoxygenase activity was lower than 5% of its initial value. The total tocopherols decreased slightly in all SST groups, especially it only decreased by 1.1% at 190 °C for 5 s. Furthermore, the increase of fatty acid value in the control group was over 100-fold than that of the SST groups during storage. The unsaturated fatty acids and total tocopherols in WWF decreased gradually, but the decrease was alleviated by SST at 190 °C for 5 s. After storage, the relative content of hexanal and 2-pentylfuran in the SST groups were 4 and 0.3-fold than those in the control group, respectively. Thus, SST may be a potential approach to stabilise the quality of WWF.

Effect of germination time on the compositional, functional and antioxidant properties of whole wheat malt and its end-use evaluation in cookie-making

This study investigated the effect of germination time on compositional changes and functionality of whole wheat malt flour (WMF) as well as its influence on cookie quality. The results illustrated that malting resulted in decreases of starch, protein, fat and ash, while it increased dietary fiber, carbohydrate and energy. Gel hydration, emulsifying and foaming ability, pasting viscosity decreased significantly, particularly during the first 2 days of germination. Both bound and immobilized water in WMF decreased with increasing germination time while the concentration and antioxidant capacity of extractable and hydrolyzable phenolic compounds (EPP and HPP) increased significantly in WMF and malt-based cookies. Flours changed from an integrated granular to an irregular tousy structure during germination. The incorporation of WMF induced a distorted "honey-like" comb structure to the cookies. Conclusively, controlled germination not only improves the physicochemical, functional properties of WMF but also increases nutrition value and technological performance of malt-based cookies.

Pasting, rheology, antioxidant and texture profile of gluten free cookies with added seed gum hydrocolloids

The study was carried out with the aim of developing gluten free cookies using rice-chickpea composite flour. Guar and locust bean gum were added to formulations at two test concentrations (0.5 and 1.0%). To study the impact of these hydrocolloids, pasting and rheometry of dough formulations was carried out. The cookies produced were subjected to colour, spread ratio, hardness and antioxidant analysis. Protein (7.56 g/100g), fat (1.78 g/100g), ash (1.25 g/100g) and carbohydrate (80.41 g/100g) content of composite flour varied significantly (p ≤ 0.05) from both rice and chickpea. Higher viscosity, viscoelasticity and antioxidant profile was shown by dough formulations with added gums. Control cookies prepared without gums showed the L*, a* and b* values of 54.62, 3.81 and 35.97, respectively. With the addition of guar and locust bean gum, colour of the cookies became lighter. Spread ratio and hardness of cookies with added gums was higher.

Effects of intense pulsed light and gamma irradiation on Bacillus cereus spores in mesquite pod flour

This study was conducted to evaluate the inactivation of Bacillus cereus spore in mesquite flour with intense pulsed light (IPL) and gamma radiation. The physical, chemical, and toxicity of treated mesquite flour were also investigated. The results showed that up to 3.51 log₁₀CFU/g B. cereus spore inactivation was achieved with 8 kGy of gamma radiation, and up to 1.69 log₁₀CFU/g reductions could be achieved after 28s of catalytic IPL exposure. Although chemometric analysis showed 9-hydroxy-10,12-octadecadienoic acid was slightly increased after a 28s-catalytic IPL treatment, the concentration is within the acceptable range. No significant increase in acetic or propionic acids (typical off-flavor volatile compounds) was observed after either treatment. For cytotoxicity, the Caco-2 cell viability analysis revealed that these two technologies did not induce significant cytotoxicity to the treated mesquite flour. Overall, these two technologies exhibit strong potential for the decontamination of B. cereus in mesquite flour.

Effects of high hydrostatic pressure on quality changes of blends with low-protein wheat and oat flour and derivative foods

This study aimed to investigate the effect of high hydrostatic pressure (HHP) on the physicochemical characteristics of blended low-protein wheat (LW) and oat flour. Additionally, quality changes in noodles made from blends treated with HHP were investigated. Crude protein and fiber contents of LW were not affected by HHP; however, those of blends were significantly higher than those of LW (p < 0.05). Water-holding capacity (WHC) of blends increased with HHP treatment. The peak viscosity of LW did not differ significantly because of HHP, and the peak and final viscosities of blends increased upon oat flour addition. The hardness, gumminess, chewiness of noodles made using LW improved with the addition of oat flour combined with HHP. The results indicated that the use of blends containing LW and oat flour as well as HHP treatment improved the quality and properties of noodles made using LW.

Effect of sonication and γ-irradiation on the properties of pea (Pisum sativum) and vetch (Vicia villosa) starches: A comparative study

In present study, the physicochemical, functional and pasting properties of starch obtained from commercially used pea were compared with vetch, an underutilized pulse variety. Starch from each cultivar was subjected to sonication (33kHz for 45min) and a dual treatment in which sonication was followed by irradiation (5kGy). Apparent amylose content of the starch from two varieties varied significantly (p>0.05) from 31.08-27.58g/100g. Sonication and dual treatment decreased the amylose content of starches. Syneresis varied more or less insignificantly (p<0.05) upon sonication. However, upon dual treatment, syneresis decreased significantly (p>0.05) from 47.82-35.22g/100g (pea) and 46.36-26.98g/100g (vetch) during the storage period of 120h. A combined effect of sonication and irradiation treatment significantly (p>0.05) changed the functional properties and pasting characteristics of starches. The samples that received the sonication treatment alone varied non-significantly from native pea and vetch starch in their physicochemical, functional and pasting properties.

Effects of controlled germination on selected physicochemical and functional properties of whole-wheat flour and enhanced γ-aminobutyric acid accumulation by ultrasonication

Using hard red spring (HRS), hard white (HW), and soft white (SW) wheat, this study examined how germination time affected the functionality of whole-wheat flour (WWF) and enhancement of γ-aminobutyric acid (GABA) content through ultrasonication. The falling number values significantly decreased and the glucose content increased by 227-357% after 15h of controlled germination. The setback value of WWF paste decreased from 654 to 6cP (HW), 690 to 9cP (SW), and 698 to 7cP (HRS), respectively, showing significant decreases of starch retrogradation in an aqueous system. The gluten quality and dough mixing performance of WWF after 5-15h of controlled germination was enhanced since gluten is less weakened during the dough heating stage of Mixolab testing. After a 72h germination, the GABA content increased by 339% of the non-sprouting counterpart. Furthermore, the GABA content in the ultrasound-treated SW sample was 30.7% higher than that without ultrasound treatment.