Effects of different modification methods on the physicochemical and rheological properties of Chinese yam (Dioscorea opposita Thunb.) starch

New insight into amino acids on the structure and rheological properties of rice starch via ultra-high pressure processing

There is a lack of research on the effects of amino acid starch interaction on the functional properties of products during Ultra-high pressure (UHP) processing. The functional properties of rice starch with the addition of Glu, Ala and Lys were studied under UHP processing. At 400 MPa, all amino acids reduced G' and weakened the gel strength, and the gel strength order was as follows: Control > Ala > Glu > Lys. At 500 MPa, Glu increased G' and G″, and enhanced the strength of the gel, but the addition of Lys had the opposite effects, the gel strength order was as follows: Glu > Ala > Control > Lys. With the increased of treatment pressure and time, the G' and G″ of all samples treated at 500 MPa decreased, and the gel strength weakened. This study will expand the application scope of rice starch as food gelling agents and functional food.

Exploring the feasibility of RS4-type resistant starch as a fat substitute in low-fat mayonnaise: An evaluation of the effects of acylated starches with different chain lengths

Given the health concerns associated with excessive fat intake, reducing the fat content in lipid-based products such as mayonnaise has become a critical priority. This study aimed to achieve dual objectives: firstly, to prepare RS4-type resistant starch by the modification of starch with acyl groups of varying chain lengths. Secondly, to investigate how different types of acylated starch and varying fat substitution levels (40 % and 80 %) affect the viscoelastic and textural properties of low-fat mayonnaise prepared with these acylated starches. The study results demonstrate that succinate modification significantly enhances the rheological properties of starch, with a peak viscosity increased by over 3 times. Furthermore, compared to acetylated starch (ACS) and octenyl succinylated starch (OSAS), succinylated starch (SCS) exhibits the highest resistant starch content, reaching 48.08 ± 0.54 %. As a partial fat substitute, low-fat mayonnaise prepared using SCS exhibits higher storage modulus (G'), hardness (10.33 ± 0.23 g), and adhesiveness (0.77 ± 0.05 mJ) than samples prepared with OSAS and ACS. However, these values remain below those of full-fat mayonnaise. Additionally, the particle size distribution of the low-fat mayonnaise ranges from 3.13 to 4.89 μm. Principal component analysis reveals that low-fat mayonnaise prepared with SCS and OSAS exhibits similar properties. While starch properties impact the rheological characteristics of low-fat mayonnaise, the specific effects vary depending on the modification method of the starch. In summary, SCS is identified as an ideal fat substitute for mayonnaise, offering a promising strategy for the development of low-fat food products.

Partial gelatinization treatment affects the structural, gelatinization, and retrogradation characteristics of maize starch-dietary fiber complexes

The effect of partial gelatinization (PG) treatment on the structural, gelatinization, and retrogradation characteristics of maize starch (MS)-dietary fiber (pectin, PE; konjac glucomannan, KG) complex was conducted. The result suggests that PG treatment shows an obvious effect in improving thermal stability, decreasing the viscoelastic, inhibiting starch gelatinization and retrogradation of the MS-PE/KG complex. The decreased breakdown viscosity, storage modulus, apparent viscosity, setback value, and hardness value could confirm these results. Furthermore, PG treatment had a better effect on inhibiting the gelatinization and retrogradation of the MS-0.3 %PE complex than other complexes. This result was proved by reduced setback value (by 78.96 %) and hardness value (by 54.46 % and 44.00 % during cold storage at 1 and 14 days, respectively). 0.3 %PE interacts with starch molecules through hydrogen bonding and electrostatic forces during PG treatment forming a strong starch granule structure to impede starch gelatinization and retrogradation. Moreover, the lighter iodine staining, the obvious coating thin layer, and the thicker fluorescence layer have appeared in the MS-PE/KG complex. The relative crystallinity and the short-range order degree of the MS-PE/KG complex were significantly decreased. The current findings provide the theoretical basis for MS modification to improve the quality and prolong the shelf-life of starch-based foods.

Structural-functional analysis of modified kudzu starch as a novel instant powder: Role of modified technology

Adopting effective methods to modify starch structure for enhanced functional properties has become a pivotal pursuit within the realm of food science. This study investigated the physicochemical and structural properties of ball milling-modified kudzu starch (BS), extrusion puffing-modified kudzu starch (ES), alcohol-alkali-modified kudzu starch (ANS), urea-alkali-modified kudzu starch (UNS), pullulanase-modified kudzu starch (PS), and extrusion puffing-pullulanase-modified kudzu starch (EPS). The d (0.5) value increasing from 10.54 μm (NS) to 83.99 μm (ANS). The Small-angle X-ray scattering (SAXS) characteristic curve of other modified kudzu starch disappeared except for the UNS. The solubility of EPS was the highest, ranging from 73 % to 80 %, significantly higher than that of NS (0 %-1 %). The agglomeration rates of ES and EPS were 0.3 % and 0.6 %, respectively, at a stirring time of 30 s. indicating favorable hydration properties. Flavonoids content in ES increased to 0.1825 mg/g. Moreover, the resistant starch content of modified kudzu starch was increased, ranging from 58.50 %-86.87 %. This study is expected to provide a scientific foundation for selecting optimal modification methods for the production of instant kudzu powder.

Octenyl succinic anhydride tigernut starch: Structure, physicochemical properties and stability of curcumin-loaded Pickering emulsion

In recent years, there has been increasing attention to starch particle-stabilized Pickering emulsions. In this study, the tigernut starch (TNS) was isolated from the tigernut meal, and further octenyl succinic anhydride tigernut starch (OSATNS) was prepared by a semi-dry method. The structure of OSATNS was analyzed and characterized by degrees of substitution (DS), contact angle, SEM, and FTIR. OSATNS was then used to stabilize the curcumin-loaded Pickering emulsion to improve the water solubility and stability of the curcumin. The results showed that OSATNS with 3 %-9 % OSA exhibited a DS range of 0.012 to 0.029, and its contact angle increased from 69.23° to 84.76°. SEM revealed that TNS consisted of small starch particles averaging 7.71 μm, and esterification did not significantly alter their morphology or size. FTIR analysis confirmed successful OSA incorporation by revealing two new peaks at 1732 cm-1 and 1558 cm-1. After 7 days of storage, Pickering emulsions stabilized with OSATNS-9 % exhibited superior stability and curcumin retention compared to Tween 80 emulsions, maintaining retention rates above 80 % even after different heat treatments. In conclusion, this study shows the potential application of OSATNS in stabilizing Pickering emulsions and demonstrates its good thermal stability and protection against curcumin during storage.

Physicochemical properties of amorphous granular starch (AGS) prepared by non-thermal gelatinization by high hydrostatic pressure (HHP) and spray drying

Corn starch was gelatinized by high hydrostatic pressure (HHP) and spray drying to make amorphous granular starch (AGS), and their physicochemical properties were compared with the conventionally prepared (heat-gelatinized and spray dried) AGS to devise a novel AGS preparation methodology. Pressure-induced (PAGS) and heat-induced AGS (HAGS) maintained their granular shape but lost their birefringence indicating that both methods could prepare AGS. DSC (differential scanning calorimeter) and XRD (X-ray diffraction) analysis confirmed the complete loss of amylopectin double helices and crystallinity of both PAGS and HAGS. However, their swelling power, solubility, RVA pasting properties, acid/shear stability, gel forming ability and textural properties were completely different. PAGS exhibited constrained swelling, suppressed amylose leaching, and reduced viscosity. Notably, HAGS formed a gel without heating, whereas PAGS yielded a viscous paste with water-soluble attributes. Even after reheating, PAGS maintained its granular structure with comparably less swelling and weaker gel strength than HAGS. Consequently, newly developed PAGS exhibited distinctive characteristics compared to the conventional HAGS, such as lower solubility and swelling power, viscosity, textural properties, and high acid and shear stabilities, rendering it a viable option for various applications within the food industry.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Structural and Physicochemical Properties of a Chinese Yam Starch-Tea Polyphenol Complex Prepared Using Autoclave-Assisted Pullulanase Treatment

Interactions between food components have a positive impact in the field of food science. In this study, the effects of tea polyphenol on the structural and physicochemical properties of Chinese yam starch using autoclave-assisted pullulanase treatment were investigated. X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, rapid visco analysis, differential scanning calorimetry, and the 3,5-dinitrosalicylic acid method were applied in this study. The results showed that the Chinese yam starch-tea polyphenol complex formed a structural domain with higher thermal stability along with lower pasting viscosities than native starch. The in vitro digestibility of Chinese yam starch decreased with the addition of the tea polyphenol, and the amount of resistant starch content in the complex was 56.25 ± 1.37%, significantly higher than that of native starch (p < 0.05). In addition, the complex showed a B+V-type crystalline structure, which confirmed that the interaction modes between the starch and tea polyphenol include hydrogen bonding and hydrophobic interactions. Moreover, the appearance of an irregular sponge network structure of the complex further supported the interactions between the starch and tea polyphenol. This study provides a theoretical basis for the development of functional foods using Chinese yam starch.

Effect of oil extraction on physicochemical and structural properties of starch isolated from acorn (Quercus brantii)

Acorn (Quercus brantii) is a rich source of starch. Since the presence of lipids affects the physicochemical properties of starch and the extraction of nutritious acorn oil and its starch is economical, it's essential to study the acorn starch characteristics before and after oil extraction. Firstly, the best condition for reaching the maximum extraction yield of acorn starch (AS) was determined, and defatted acorn starch (DAS) was extracted in the same conditions. Then the physicochemical properties of both samples were compared. The structural properties were investigated by Scanning Electron Microscopy images. The maximum yield of AS was obtained in a 1:10 ratio (acorn flour: water) at 45 °C and 180 min. Results demonstrated significant differences between color parameters and fat content (0.65 ± 0.04 and 12 ± 0.02) of AS and DAS. Also, DAS had higher swelling power, solubility, and lower turbidity than AS. The X-ray diffraction pattern showed that AS was C-type with relative crystallinity of 27.77 %. Pasting, thermal, and textural properties reflected the higher viscosity, gelatinization, retrogradation, and hardness for DAS compared to AS. Consequently, all of these analyses exhibited structural changes in acorn starch by removing lipids from acorn flour and provided essential information for further applications of acorn starch in different industries.

Esterified unpopped foxnut (Euryale ferox) starch: molecular and rheological characterization

BACKGROUND

Acetylated-based starches are broadly used in the food industry as emulsifiers, and as thickening and film-forming agents. Better understanding of the structural and rheological parameters would facilitate the selection of optimal acetylated starches for particular applications. Nuclear magnetic resonance (¹ H-NMR), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) patterns, and rheological properties, including elasticity (G'), loss (G") moduli, complex viscosity (η*) and study shear stress (δ), were determined for acetylated fox nut starch (FNS) samples.

RESULTS

The degree of substitution (DS) varied significantly with increasing acetyl concentration from 2-6%. Nuclear magnetic resonance analysis of acetylated FNS showed an additional chemical shift at 2.08 ppm in comparison with native FNS, confirming the linking of the H or the -OCH3 group. The acetylated FNS starches showed better short-range ordering of molecules, as confirmed by FTIR. A significant increase in the functional and gelatinization properties with increasing acetyl concentration was observed. The power law parameters (n, K) and dynamic moduli (G' and G") increased with increasing acetyl concentration and presented shear thinning behavior. The gelatinization peak temperature and enthalpy decreased with increasing acetyl concentration.

CONCLUSION

The observed DS below 2.5 would mean safe food consumption and the significant alteration of functional and structural properties with varying acetyl content will extend the use of FNS in food and allied industries. © 2023 Society of Chemical Industry.

Colorimetric and antioxidant films based on biodegradable polymers and black nightshade (Solanum nigrum L.) extract for visually monitoring Cyclina sinensis freshness

In this study, colorimetric and antioxidant films were developed by using cassava starch (CS), κ-carrageenan (KC) and black nightshade fruit anthocyanins (BNA), and their physical and functional properties were investigated. We found BNA presented significant color changes in different pH solutions. And incorporation of BNA significantly increased the tensile strength, water vapor permeability, UV-vis light barrier property, pH-sensitivity and antioxidant activity of CS-KC film. Results of structural characterization indicated that H-bonds were formed between CS, KC and BNA in films and the film compactness was significantly improved by BNA incorporation. Results of the rheological property assay showed the films had high apparent viscosity with an obvious shear-thinning behavior. When applied to monitoring the quality change of Cyclina sinensis, CS-KC-BNA films exhibited significant color changes with the degradation process of C. sinensis qualities. Our results suggested CS-KC-BNA films could be utilized in smart packaging in food industry.

Establishment of a quality evaluation system of sweet potato starch using multivariate statistics

Background

The quality of starch greatly affects the quality of processed products. There are many indexes for quality evaluation of starch. Currently, amylose content is considered the chief index in the quality evaluation of sweet potato starch, which is entirely based on tradition (experience) method. The existing evaluation standards lack quality evaluation standards for sweet potato starch.

Purpose

To screen reasonable evaluation indexes of sweet potato starch, and establish a scientific and systematic evaluation system of sweet potato starch.

Methods

Twenty-two components and quality indexes of sweet potato starch were measured. The evaluation indexes of sweet potato starch were screened based on a statistical description, correlation analysis, and principal component analysis (PCA), and a quality evaluation model of sweet potato starch for brewing was established based on analytic hierarchy process. The calculated values of the model were verified by linear fitting with standardized sensory evaluation values.

Results

The coefficient of variation of total starch content (%), amylose content (%), amylopectin content (%), L* value, ΔE, water absorption capacity (g/g), and pasting temperature was less than 6%, while the coefficient of variation of other indexes was larger. In addition, there were different degrees of correlation among the indexes. PCA was used to identify interrelated variables, and the first six principal components together account for 82.26% of the total variability. Then, seven core indexes — setback (cp), rate of regression (%), ratio of amylose to amylopectin (%), gel strength (kgf/cm2), a* value, ash content (%), and solubility (%) — were selected from the six principal components according to the load value of the rotation matrix. These seven core indexes replaced the original 22 indexes to simplify the evaluation of sweet potato starch. The quality evaluation model of sweet potato starch was Y = 0.034X2 + 0.321X6 + 0.141X8 + 0.08X17 + 0.023X19 + 0.08X21 + 0.321X22.

Conclusion

The comprehensive evaluation system of sweet potato starch can accurately predict the quality of sweet potato starch. The development of such a system is of great significance to the post-harvest processing of high-starch sweet potato and the breeding of high-quality and high-starch sweet potato varieties.

Gallic acid and heat moisture treatment improve pasting, rheological, and microstructure properties of Chinese yam starch-chitosan gels: A comparative study

Nowadays，It is difficult for the polysaccharide-starch system to meet demand of practical production owing to the poor gel properties. Therefore, aiming to further improve the practical application of polysaccharide-starch gel, the effects of gallic acid (GA) and heat moisture treatment (HMT) on the gel properties and microstructure of yam starch/chitosan (YS/CS) composite gels were investigated. Swell power (SP) results showed that GA and HMT treatment respectively reduced the SP of YS gel by 3.24 g/g and 6.03 g/g, given that GA and HMT decrease the rheology of the water phase inhibiting the entry of water into the swollen starch. In the pasting process, HMT reduced pasting viscosity of the HMT/YS system because only little amylose was leached in the medium for elevating its viscosity after HMT. The rheological properties suggested that high temperature treatment of HMT facilitated the disruption and disintegration of starch granules resulting dynamic modulus had a decline trend. The elastic properties of GA/YS gels were enhanced with the addition of GA, which could be supported by the thicken lamellar observed in its microstructure. In general, GA and HMT effectively alter the gel properties of YS/CS gel system, and facilitate its practical application in food industry.

Effects of carboxymethyl chitosan on physicochemical, rheological properties and in vitro digestibility of yam starch

The effects of carboxymethyl chitosan (CMCS) on the pasting, rheological, and physical properties of yam starch (YS) were investigated. Different concentrations of CMCS were added to the YS, followed by heating paste treatment at 95 °C. Then the blends were subjected to the determination of physicochemical, rheological properties and in vitro digestibility. Our results showed that CMCS reduced the paste viscosity of YS and the addition of CMCS did not effectively inhibit the movement of water molecules. Rheological measurements results showed that YS-CMCS blends exhibited shear thinning behavior. Furthermore, because of the presence of amylose inhibited the swelling of the starch and leaching of amylose, the addition of CMCS had no significant difference between solubility and swelling power of YS.

Synergetic Anticorrosion Mechanism of Main Constituents in Chinese Yam Peel for Copper in Artificial Seawater

Active constituents of Chinese yam peel (CYPE), namely, diosgenin (DOG), batatasin-I (BTS-I), batatasin-III (BTS-III), and yam polysaccharide (Y-PS), were extracted via an ultrasonic soaking strategy. The synergetic anticorrosion mechanism among these compounds for copper in artificial seawater (ASW) was clarified by gravimetric measurements, electrochemical evaluations, surface analyses, quantum chemical calculations under a dominant solvent model, and molecular dynamics (MD) simulations. The results of weight loss revealed that CYPE strongly inhibited the corrosion of copper in ASW, and the elevating temperature boosted the anticorrosion efficacy of CYPE. The inhibition efficiency could attain 96.33% with 900 mg/L CYPE in ASW at 298 K due to effective adsorption. CYPE simultaneously suppressed the anodic and cathodic reactions for copper in ASW, which could be categorized as the mixed-type corrosion inhibitor with the predominant anodic effect. Similar electrochemical kinetics was evidenced by electrochemical frequency modulation (EFM). Electrochemical impedance spectroscopy (EIS) indicated that CYPE prominently increased the charge-transfer resistance at the copper/electrolyte interface without altering the corrosion mechanism. Extending the immersion time was also conducive for CYPE to further minimize the corrosion of copper in ASW, which was demonstrated by the time-course polarization, EIS, and EFM tests. Owing to the adsorption of CYPE, the copper surface was well-protected and showed reduced wettability and limited variation of roughness. From the outcomes of quantum chemical calculations, global and local reactive descriptors of DOG implied the cross-linked deposition of actually formed dioscin on the copper surface; otherwise, those of BTS-I/-III showed the propensity for parallel adsorption, which could chemically anchor on the voids uncovered by dioscin and thereby synergistically inhibit the corrosion process. The adsorption orientations of DOG, BTS-I, and BTS-III were also consolidated by MD simulations. The findings of this study might be beneficial to inspire the development of eco-friendly corrosion inhibitors from plant wastes for copper in marine environments.

Changes in structural, digestive, and rheological properties of corn, potato, and pea starches as influenced by different ultrasonic treatments

Ultrasound was widely used in starch modification, whereas there was no review focusing on the effects of different ultrasonic treatments on A-, B- and C-type starches. In this study, the effects of ultrasonic power (UP, 100-600 W) and ultrasonic time (UT, 5-35 min) on structural, digestibility and rheology of corn starch (CS), potato starch (PtS), and pea starch (PS) were investigated. As a result, UP and UT decreased the apparent amylose content of CS and PS, while increased the apparent amylose content of PtS. UP and UT enhanced R1047/1022 values of CS, whereas those of PtS and PS were decreased. Moreover, UP and UT decreased the gelatinization enthalpy of CS, PtS and PS. In vitro digestion revealed that UP and UT decreased the resistant starch content of PtS and PS, but increased the resistant starch content of CS. Rheological tests indicated that UP and UT decreased the flow behavior index of CS, PtS and PS pastes, and caused an increase in storage modulus and loss modulus. Results revealed that ultrasonic treatment represented a promising technology to obtain CS, PtS and PS with tailored digestibility and rheology, which allowed the texture and glycemic response of starch-based products to be adjusted.

Synthesis of starch-based super absorbent polymer with high agglomeration and wettability for applying in road dust suppression

Dust pollution is an important factor restricting social development and affecting human health, especially in some developing countries. Herein, mechanical activation-assisted solid phase reaction (MASPR) and conventional liquid phase (LP) method were employed to synthesize different superabsorbent polymers (SAPs), defined as SAP-MA and SAP-LP, respectively. The rheological properties, crystal structure, changes of functional groups, and dust suppression performance of the SAPs prepared by these two methods were compared, and the dust suppression mechanism of SAPs was discussed via the adsorption experiment between dust suppressant and dust particles. The results showed that SAPs were successfully prepared by the two methods. Compared with SAP-LP, SAP-MA with lower molecular weight, higher grafting rate, and better fluidity and water absorption showed excellent suppression performance. This enhancement could be attributed to that the SAP-MA exhibited lower crystallinity and better film-forming ability, anti-evaporation, anti-consolidation, and permeability induced by MA. Furthermore, the effective chemical adsorption between SAPs and dust particles had a stable consolidation effect. This environmentally-friendly method for the preparation of starch-based super absorbent polymer for road dust suppressant may provide new insights for the valorization of cassava starch and large-scale production of dust suppressant.

Physicochemical properties and in vitro digestibility of hydrothermal treated Chinese yam (Dioscorea opposita Thunb.) starch and flour

The objective of this study was to investigate the effects of hydrothermal treatments (heat-moisture treatment (HMT) and annealing (ANN)) on the physicochemical properties and in vitro digestibility of yam starch and yam flour. Hydrothermal treatments decreased the pasting properties of yam starch and yam flour. Compared with yam starch, HMT significantly (p < 0.05) reduced the pasting viscosities of yam flour. Both HMT and ANN caused an increase of the gelatinization temperatures (T_o, T_p, and T_c) and a decrease of enthalpy (△H). The increasement in ratio of 1047/1022 cm^-1 and 995/1022 cm^-1 suggested that HMT and ANN resulted in an increase in short-range order. The crystalline pattern of all samples was still A-type, and HMT yam starch exhibited higher crystallinity (26.20%). The most significant inhibition of in vitro digestibility was found in HMT yam flour, with slowly digestible starch and resistant starch contents increasing by 3.73% and 4.40%, respectively. Hydrothermal treatments made the no-starch ingredients in yam flour agglomerate and adhere to starch granules. Confocal laser scanning microscopy showed that the starch being coated or embedded by protein was a possible reason for the differences in physicochemical properties and in vitro digestibility between yam starch and yam flour.

Effect of yam (Dioscorea spp.) starch on the physicochemical, rheological, and sensory properties of yogurt

This study investigated the effect of the addition of starch from “hawthorn” yam (Dioscorea rotundata) and “creole” yam (Dioscorea alata) at different concentrations (0.1%, 0.3%, and 0.5% w/w) on the physicochemical and sensory properties of stirred-type yogurt. Pectin (0.3% w/w) was used as a reference stabilizer. Yogurt with yam starch presented 13.38% less syneresis than yogurts with pectin. At the sensory level, the most accepted treatment was yogurt with “creole” yam starch at 0.1% w/w. During 21 days of storage, yogurt with yam starch (“creole” and “hawthorn”) at 0.1% w/w showed a decrease in syneresis between 7% and 8%, while in those with pectin, syneresis remained practically constant in this period. Yogurt with yam starch was characterized as a pseudoplastic fluid, with a lactic acid bacterial count according to NTC 805. Yam starch can be used as stabilizer because it improves the physicochemical, sensory, and rheological characteristics of stirred-type yogurt. Especially the “creole” yam starch (0.1% w/w), which presents the best preference by consumers.

An Efficient Approach to Prepare Water-Redispersible Starch Nanocrystals from Waxy Potato Starch

Starch nanocrystals (SNCs) are a biodegradable polymer which has been widely studied and used in many fields. In this study, we have developed an efficient procedure for the preparation of SNCs. First, sodium hexametaphosphate (SHMP) and vinyl acetate (VAC) were used to modify waxy potato starch (WPS). Then, the modified starches were hydrolyzed with sulfuric acid to prepare SNCs. Results showed that SNCs prepared with modified starch had higher zeta potentials and better dispersion properties than the original starch. After modification, WPS still maintained its semi-crystalline structure, but the surface became rougher. SHMP-modified WPS showed a decrease in viscosity peak and an increase in gelatinization temperature. VAC-modified WPS showed increased swelling power. Additionally, SNCs prepared with VAC-modified WPS had better water redispersibility and dispersion stability than those from SHMP-modified starch—which will have broader application prospects in the field of safe and biodegradable food packaging.

Physicochemical properties and structure of modified potato starch granules and their complex with tea polyphenols

The physicochemical, rheological properties and structure of potato starch and starch-tea polyphenols (TPs) complex modified by enzyme and alcohol was investigated in this study. Cavities on the modified starch granules and morphology change could be investigated by SEM, while significant birefringence observed in complete granules by polarizing light microscope, but disappeared in crashed starch. TPs inhibited the aggregation of amylose and retrogradation of starch-TPs complex, resulting in the decrease of gel strength, and the increase of viscosity and gelatinization stability of starch granules. Fourier transform infrared (FT-IR) spectra showed that intramolecular hydrogen bond could be formed between TPs with modified starch, and the hydrogen bond force formed by starch and TPs was stronger than that between starch molecules. X-ray diffraction (XRD) analysis revealed that three modification methods did not change the crystalline structure of starch, but new diffraction peaks appeared in the four starch-TPs complex, suggesting that the hydrogen bond was incurred by interaction between TPs and amylose to form V-type crystalline. These results demonstrated that the complex formed by TPs and native/modified potato starch could be used in food industrial applications due to the inhibition of starch retrogradation.

Starch nanocrystals as the particle emulsifier to stabilize caprylic/capric triglycerides-in-water emulsions

Starch nanocrystals (SNCs) grafted with octenyl succinic anhydride (OSA) were used to stabilize caprylic/capric triglycerides (GTCC)-in-water emulsions. The morphology and viscoelasticity of emulsions were studied in terms of particle loadings and degrees of substitution (DSs). It is found that the emulsifying capacities of SNCs increase with increased DSs. Both the pristine SNC and modified ones can be well used to stabilize emulsions, whereas the emulsification follows different mechanisms. The platelet-like structure of SNCs, together with its improved amphiphilicity after surface treatments, are important to the formation and evolution of droplet clusters. The deformation and relaxation of those clusters result in weak flow overshoots and strong thixotropy in different shear flow fields, which favor storage and applications of GTCC-in-water emulsions as hydrocolloids. The mechanisms were then discussed in terms of rigidity of SNC and relaxations of clusters. This work proposes a promising application of SNC in food and cosmetic industries.