Detection of Staphylococcus aureus enterotoxin A and B genes with PCR-EIA and a hand-held electrochemical sensor

Detection of Enterotoxigenic Potential of Staphylococcus aureus Isolates from Cheese Samples with Two Different Methods

The primary objective of our study was to detect the occurrence of enterotoxigenic Staphylococcus aureus in diverse types of cheese (cow's milk cheese and mixed milk cheese) samples from R.N. Macedonia. Cheese samples were analyzed for enumeration and isolation of the S. aureus strains according to ISO 6888-1. We detected the toxigenic potential of the strains by the use of the Enzyme Link Fluorescent Assay VIDAS system, and we confirmed the presence of the SEs (sea, seb, sec, sed, see) genes by multiplex PCR. The results showed that out of 270 samples of cheese, coagulase-positive staphylococci (CPS) were detected in 27 (10%), and coagulase-negative staphylococci in five samples (1.8%). Biochemically, all 27 CPS samples were confirmed to be Staphylococcus aureus. With VIDAS SET2 test we confirmed that 11 isolates are producers of one of the toxins limited by the test. With the conventional PCR we confirmed genes in only 7 isolates. Most common detected gene was seb n=3 (42.8%), followed by sea n=2 (28.6%), and sec n=2 (28.6%). Additionally, sed and see genes were not detected in any of the S. aureus isolates. Discrepancies between the two test methods for detection of enterotoxigenic potential are not uncommon. The presence of viable Staphylococcus aureus cells that have enterotoxin potency demonstrates the importance of appropriate hygiene practices in the diary process and also the maintenance of the products in order to obtain a safe final product for the consumers.

Enterotoxigenicity of Staphylococcus aureus isolated from traditional and commercial dairy products marketed in Iran

This study was conducted to determine the prevalence rate, enterotoxigenecity, and antimicrobial resistance of S. aureus isolated from dairy products in Iran. From September 2010 to July 2011, a total of 347 samples from various dairy products, traditional and commercial, were collected from randomly selected retail stores. Overall, 20 samples (5.8%) were found to be contaminated with S. aureus. The highest prevalence of S. aureus was found in traditional cheese (11.1%), followed by traditional ice-cream (5.9%), cream (5.6%), and butter (5.3%). The ability to synthesize classical staphylococcal enterotoxins (SEA-E) was determined in 7 of 20 (35%) isolates by using ELISA. SE type C was the most common enterotoxin found in the isolated S. aureus (42.9%), followed by SE type A (28.6%), SEA+SEC and SE type D (14.3%). Of the 20 isolates, 16 (80.0%) were positive for one or more entrotoxin genes and 8 different genotypes were observed. Susceptibilities of the isolates were determined for 14 antimicrobial drugs using the disk diffusion assay. Most of the isolates (95.0%) were resistant to one or more two antimicrobial agent and 45.0% of the isolates were resistant to three or more of drugs. Resistance to ampicillin was the most common finding (55.0%), followed by tetracycline (40.0%) and penicillin G (30.0%). The results of this study showed the wide spread of enterotoxigenic and multidrug-resistant S. aureus strains in traditional dairy products in Iran and highlighted their public health hazards.

Electrochemical techniques on sequence-specific PCR amplicon detection for point-of-care applications

Nucleic acid based analysis provides accurate differentiation among closely affiliated species and this species- and sequence-specific detection technique would be particularly useful for point-of-care (POC) testing for prevention and early detection of highly infectious and damaging diseases. Electrochemical (EC) detection and polymerase chain reaction (PCR) are two indispensable steps, in our view, in a nucleic acid based point-of-care testing device as the former, in comparison with the fluorescence counterpart, provides inherent advantages of detection sensitivity, device miniaturization and operation simplicity, and the latter offers an effective way to boost the amount of targets to a detectable quantity. In this mini-review, we will highlight some of the interesting investigations using the combined EC detection and PCR amplification approaches for end-point detection and real-time monitoring. The promise of current approaches and the direction for future investigations will be discussed. It would be our view that the synergistic effect of the combined EC-PCR steps in a portable device provides a promising detection technology platform that will be ready for point-of-care applications in the near future.

Ultra-sensitive detection of bacterial toxin with silicon nanowire transistor

Nanowire field effect transistors (nano-FET) were lithographically fabricated using 50 nm doped polysilicon nanowires attached to two small gold terminals separated from each other by a approximately 150 nm gap to serve as the basis for electronic detection of bacteria toxins. The device characterizations, semiconducting properties and use in a robust and sensitive bio-molecular detection sensor of bacterial toxins were reported in this work. The device characteristics were demonstrated with varying gate and drain voltages. The bio-molecular detection was demonstrated using electrochemical impedance spectroscopy (EIS), using Staphylococcus aureus Enterotoxin B (SEB) as the target molecule. The detection limit of SEB was observed in the range of 10-35 fM.

Electrochemical detection of harmful algae and other microbial contaminants in coastal waters using hand-held biosensors

Standard methods to identify microbial contaminants in the environment are slow, laborious, and can require specialized expertise. This study investigated electrochemical detection of microbial contaminants using commercially available, hand-held instruments. Electrochemical assays were developed for a red tide dinoflagellate (Karenia brevis), fecal-indicating bacteria (Enterococcus spp.), markers indicative of human sources of fecal pollution (human cluster Bacteroides and the esp gene of Enterococcus faecium), bacterial pathogens (Escherichia coli 0157:H7, Salmonella spp., Campylobacter jejuni, Staphylococcus aureus), and a viral pathogen (adenovirus). For K. brevis, two assay formats (Rapid PCR-Detect and Hybrid PCR-Detect) were tested and both provided detection limits of 10 genome equivalents for DNA isolated from K. brevis culture and amplified by PCR. Sensitivity with coastal water samples was sufficient to detect K. brevis that was "present" (<or=1000 cells/l) without yielding false positive results and the electrochemical signal was significantly different than for samples containing cells at "medium" concentrations (100,000 to<10(6)cells/l). Detection of K. brevis RNA was also shown. Multi-target capability was demonstrated with an 8-plex assay for bacterial and viral targets using isolated DNA, natural beach water spiked with human feces, and water and sediments collected from New Orleans, Louisiana following Hurricane Katrina. Furthermore, direct detection of dinoflagellate and bacterial DNA was achieved using lysed cells rather than extracted nucleic acids, allowing streamlining of the process. The methods presented can be used to rapidly (3-5h) screen environmental water samples for the presence of microbial contaminants and have the potential to be integrated into semi-automated detection platforms.

Sandwich electrochemical immunoassay for the detection of Staphylococcal enterotoxin B based on immobilized thiolated antibodies

A new approach for the sensitive detection of Staphylococcal enterotoxin B (SEB) is presented based upon an electrochemical enzymatic immunoassay that utilizes thiolated antibodies immobilized on a gold surface. This method relies on the use of amine- or sulfhydryl-reactive heterobifunctional cross-linkers for the introduction of 2-pyridyl-disulfide groups to the antibody. The disulfide-containing linkages are subsequently cleaved with a suitable reducing agent, such as dithiothreitol (DTT), and the thiolated antibody-gold bond is covalently formed on a gold working electrode. Various cross-linking agents for immobilization of the capture antibody onto the gold electrode were investigated and compared. Factors influencing the thiolation and immobilization were investigated and optimized. The feasibility of such antibody immobilization and the subsequent sandwich enzyme immunoassay is demonstrated for the sensitive detection of SEB. The detection limit estimated from a representative dose-response curve is 1 ng/mL, corresponding to 5 pg in a 5-microL sample. Coupling the specificity of immunoassays with the sensitivity and low detection limits of electrochemical detection shows real promise for future sensing technology in enabling the development of single-use disposable devices.

Chapter 26 Thick- and thin-film DNA sensors

The use of thick- and thin film electrodes as supports for genosensor devices offers enormous opportunities for their application in molecular diagnosis. The technologies used in the fabrication of both thick- and thin-film electrodes allow the mass production of reproducible, inexpensive and mechanically robust strip solid electrodes. Other important advantages of these electrodes are the possibility of miniaturization as well as their ease of manipulation in a disposable manner and therefore the use of small volumes. To detect transcriptional profiling and single nucleotide polymorphism thin-film arrays of 14, 20, 25, 48, and 64 electrodes have been fabricated, using lithographic techniques. Readout systems for these arrays based on electrical detection have also been developed. Moreover, a thick-film sensor array suitable for automation combined to readout based on intermittent pulse amperometry (IPA) has been commercialized. These genosensors and the readout instruments provide a simple, accurate and inexpensive platform for patient diagnosis. It is more than probable that arrays for 50–100 DNA sequences will be needed for some clinical applications. Although it is not difficult to design electrode pads with reproducible dimensions of a micron or less, the electrochemical readout requires mechanical connections to each individual electrode.