Effect of edible pectin-fish gelatin films containing the olive antioxidants hydroxytyrosol and 3,4-dihydroxyphenylglycol on beef meat during refrigerated storage

Recent advances in spoilage mechanisms and preservation technologies in beef quality: A review

Beef is a popular meat product that can spoil and lose quality during postharvest handling and storage. This review examines different preservation methods for beef, from conventional techniques like low-temperature preservation, irradiation, vacuum packing, and chemical preservatives, to novel approaches like bacteriocin, essential oil, and non-thermal technologies. It also discusses how these methods work and affect beef quality. The review shows that beef spoilage is mainly due to enzymatic and microbial activities that impact beef freshness, texture, and quality. Although traditional preservation methods can extend beef shelf life, they have some drawbacks and limitations. Therefore, innovative preservation methods have been created and tested to improve beef quality and safety. These methods have promising results and potential applications in the beef industry. However, more research is needed to overcome the challenges and barriers for their commercialization. This review gives a comprehensive and critical overview of the current and emerging preservation methods for beef and their implications for the beef supply chain.

Magnetic molecularly imprinted polymers using ternary deep eutectic solvent as novel functional monomer for hydroxytyrosol separation

In this work, magnetic molecularly imprinted polymers (MIPs) for specific recognition of Hydroxytyrosol (HT) were designed by vinyl-modified magnetic particles (Fe3O4@SiO2@VTEOs) as carrier, ternary deep eutectic solvent (DES) as functional monomer, while ethylene glycol dimethacrylate (EGDMA) as crosslinker. The optimum amount of DES was obtained by adsorption experiments (molar ratio, caffeic acid: choline chloride: formic acid = 1:6:3) which were 140 μL in total. Under the optimized amount of DES, the maximum adsorption capacity of the MIPs particles was 42.43 mg g-1, which was superior to non-imprinted polymer (4.64 mg g-1) and the imprinting factor (IF) is 9.10. Syringin and Oleuropicrin were used as two reference molecules to test the selectivity of the DES-MIPs particles. The adsorption capacity of HT was 40.11 mg g-1. Three repeated experiments show that the polymer has high stability and repeatability (RSD = 5.50).

Enhancing the lipid stability of foods of animal origin using edible packaging systems

Foods of animal origin are prone to oxidation due to their high lipid content and fatty acid profile. Edible packaging systems have evolved as a new way of preserving animal-derived foods and have been reported to retard lipid oxidation using antioxidant molecules from side-streams, waste, and agricultural by-products. Studies have evaluated previously undocumented film materials and novel bioactive molecules as additives for edible packaging for animal-derived foods. However, none of the studies is specifically focused on evaluating the packaging systems available for enhancing lipid stability. This paper thoroughly examines and discusses the application of edible packaging containing novel antioxidant molecules for controlling the lipid oxidation of animal-derived foods. The paper analyses and interprets the main findings of the recently published research papers. The materials and active principles used for enhancing lipid stability have been summarised and the underlying mechanisms discussed in detail. Studies should aim at using cheaper and readily available natural ingredients in future for the production of affordable packaging systems.

Preventing Microbial Growth in Game Meat by Applying Polyphenolic Extracts from Olive Mill Vegetation Water

We studied the efficacy of different formulations of polyphenol extracts (mainly containing hydroxytyrosol and tyrosol) from olive mill vegetation water on the microflora on the surfaces of game meat cuts with high or low initial bacterial loads. Meat with a high microbial load (>5 Log cfu/g; mean value = 6.83 ± 0.45 standard deviation) was immersed for 10 or 60 sec into 25% and 10% solutions of microencapsulated freeze-dried and non-encapsulated polyphenolic extracts. Aerobic colony, Enterobacteriaceae, Pseudomonas spp., and lactic acid bacteria counts were determined on treated samples compared to controls after 7 days of storage (in vacuum-packed conditions at +3 °C). Significant differences were registered only for aerobic colony count for a 10% liquid extract treatment (0.64 log reduction). In contrast, the dipping or immersion of game meat with low initial microbial loads (<5 Log cfu/g; mean value = 3.58 ± 0.72 standard deviation) in 10% solutions of the polyphenol extracts effectuated significant reductions in all bacteria counts (p < 0.002) at 7 and 14 days of storage for different extracts, independently from the application methods. The use of the extracts to inhibit bacterial growth in game meat should only be considered if a good hygienic baseline is guaranteed.

Packaging films based on biopolymers from seafood processing wastes: Preparation, properties, and their applications for shelf-life extension of seafoods-A comprehensive review

Biopolymers derived from seafood processing byproducts are used to prepare active and biodegradable films as the packaging of food products. These films possess bioactivities to enhance the shelf life of packed foods by proactively releasing antimicrobial/antioxidative agents into the foods and providing sufficient barrier properties. Seafood processing byproducts are an eminent source of valuable compounds, including biopolymers and bioactive compounds. These biopolymers, including collagen, gelatin, chitosan, and muscle proteins, could be used to prepare robust and sustainable food packaging with some antimicrobial agents or antioxidants, for example, plant extracts rich in polyphenols or essential oils. These active packaging are not only biodegradable but also prevent the deterioration of packed foods caused by spoilage microorganisms as well as chemical deterioration. Seafood discards have a promising benefit for the development of environmentally friendly food packaging systems via the appropriate preparation methods or techniques. Therefore, the green packaging from seafood leftover can be better exploited and replace the synthetic counterpart.

Formulation and characterization of starch-based novel biodegradable edible films for food packaging

Petroleum-based plastics were widely used as packaging materials. However, plastic materials were not reusable and biodegradable, causing a severe negative impact on the environment. Edible films can be a suitable alternative to plastic films, particularly in food packaging. This research work prepared edible films containing blends of cornstarch, arrowroot powder, refined wheat flour, vinegar, and glycerol. Arrowroot powder added strength and nutritional value to the films. Glycerol, as a plasticiser, improved the flexibility of films. The combination of vinegar and glycerol increased the film's strength. The characteristic properties of prepared films, like thickness, bursting strength, moisture content, transparency, water-solubility, water vapour permeability, tensile strength, elongation, and Young's modulus, were analysed. The thermal stability of the films was evaluated by thermogravimetric analysis. The films were characterised by FTIR spectroscopy, and their surface morphology was analysed by scanning electron microscopy. The prepared films exhibited excellent properties suitable for food packaging.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-023-05803-2.

Biodegradable nano-reinforced packaging with improved functionality to extend the freshness and longevity of Plums Oemleria cerasiformis

Food packaging reinforced with Zn-doped TiO2 nanoparticles with enhanced prerequisite film-forming and biodegradable traits was prepared to augment fresh food storage. Pure and tailored metal (Zinc, Copper, and Selenium) doped TiO2 nanoparticles were synthesized and analyzed through multiple characterization techniques (optical spectra, XRD patterns (X-Ray Diffraction), Dynamic Light Scattering, and Scanning Electron Microscopy). The synthesized nanoparticles were tested for their Minimum Inhibitory Concentrations, antimicrobial potential against common lethal food pathogens, and cytotoxicity. Compared to Cu- and Se-doped nanoparticles, Zn-doped TiO2 nanoparticles displayed the most potent antimicrobial activity with insignificant cytotoxicity and were incorporated into the food packaging materials. The developed nano-reinforced food packaging efficaciously augmented the freshness of plums (Oemleria cerasiformis) for 16 days (42 ± 2 °C). The physicomechanical characterization of the nano-reinforced packaging establishes its utility in food packaging applications. The developed biodegradable packaging undergoes complete decomposition within 12 days of storage in natural soil.

A critical review on biodegradable food packaging for meat: Materials, sustainability, regulations, and perspectives in the EU

The development of biodegradable packaging is a challenge, as conventional plastics have many advantages in terms of high flexibility, transparency, low cost, strong mechanical characteristics, and high resistance to heat compared with most biodegradable plastics. The quality of biodegradable materials and the research needed for their improvement for meat packaging were critically evaluated in this study. In terms of sustainability, biodegradable packagings are more sustainable than conventional plastics; however, most of them contain unsustainable chemical additives. Cellulose showed a high potential for meat preservation due to high moisture control. Polyhydroxyalkanoates and polylactic acid (PLA) are renewable materials that have been recently introduced to the market, but their application in meat products is still limited. To be classified as an edible film, the mechanical properties and acceptable control over gas and moisture exchange need to be improved. PLA and cellulose-based films possess the advantage of protection against oxygen and water permeation; however, the addition of functional substances plays an important role in their effects on the foods. Furthermore, the use of packaging materials is increasing due to consumer demand for natural high-quality food packaging that serves functions such as extended shelf-life and contamination protection. To support the importance moving toward biodegradable packaging for meat, this review presented novel perspectives regarding ecological impacts, commercial status, and consumer perspectives. Those aspects are then evaluated with the specific consideration of regulations and perspective in the European Union (EU) for employing renewable and ecological meat packaging materials. This review also helps to highlight the situation regarding biodegradable food packaging for meat in the EU specifically.

Polysaccharide-Based Edible Films/Coatings for the Preservation of Meat and Fish Products: Emphasis on Incorporation of Lipid-Based Nanosystems Loaded with Bioactive Compounds

The high water and nutritional contents of meat and fish products make them susceptible to spoilage. Thus, one of the most important challenges faced by the meat industry is extending the shelf life of meat and fish products. In recent years, increasing concerns associated with synthetic compounds on health have limited their application in food formulations. Thus, there is a great need for natural bioactive compounds. Direct use of these compounds in the food industry has faced different obstacles due to their hydrophobic nature, high volatility, and sensitivity to processing and environmental conditions. Nanotechnology is a promising method for overcoming these challenges. Thus, this article aims to review the recent knowledge about the effect of biopolymer-based edible films or coatings on the shelf life of meat and fish products. This study begins by discussing the effect of biopolymer (pectin, alginate, and chitosan) based edible films or coatings on the oxidation stability and microbial growth of meat products. This is followed by an overview of the nano-encapsulation systems (nano-emulsions and nanoliposomes) and the effect of edible films or coatings incorporated with nanosystems on the shelf life of meat and fish products.

A critical review on protein-based smart packaging systems: Understanding the development, characteristics, innovations, and potential applications

The use of packaging in the food industry is essential to protect food and improve its shelf life. However, traditional packaging, based on petroleum derivatives, presents some problems because it is non-biodegradable and is obtained from nonrenewable sources. In contrast, protein-based smart packaging is presented as an environmentally friendly strategy that also permits obtaining packaging with excellent characteristics for the formation of smart films and coatings. This review aims to summarize recent developments in smart packaging, focusing on edible films/coatings materials, originating from animal and plant protein sources. Various characteristics like mechanical, barrier, functional, sensory, and sustainability of packaging systems are discussed, and the processes used for their development are also described. Moreover, relevant examples of the application of these smart packaging technologies in muscle foods and some innovations in this area are presented. Protein-based films and coatings from plant and animal origins have great potential to enhance food safety and quality, and reduce environmental issues (e.g., plastic pollution and food waste). Some characteristics of the packages can be improved by incorporating polysaccharides, lipids, and other components as antioxidants, antimicrobials, and nanoparticles in protein-based composites. Promising results have been shown in many muscle foods, such as meat, fish, and other seafood. These innovative smart packaging systems are characterized by their renewable and biodegradable nature, and sustainability, among other features that go beyond typical protection barriers (namely, active, functional, and intelligent features). Nonetheless, the utilization of protein-based responsive films and coatings at industrial level still need optimization to be technologically and economically valid and viable.

Development of Edible Composite Film from Fish Gelatin-Pectin Incorporated with Lemongrass Essential Oil and Its Application in Chicken Meat

One of the greatest challenges encountered by the food industry is the loss of quality of food products during storage, especially perishable foods such as chicken breast, which eventually adds to the waste. Edible films are known as a potential alternative to maintain food quality and also improve shelf life by delaying the microbial spoilage and providing moisture and gas barrier properties. Developments in edible films from biopolymer composites such as fish gelatin, pectin and essential oils have great potential and promising results in enhancing the shelf life of food products. This study was conducted to determine the effect of adding pectin and lemongrass essential oil on the properties of gelatin film and its application to preserve the quality of chicken breast. In this study, the fish skin gelatin and pectin were used with various compositions (100:0; 75:25; 50:50%), with and without the addition of lemongrass essential oil to develop edible films by a casting method. The results showed that the fish gelatin-pectin with the addition of essential oils caused a significant influence on several physicochemical properties such as the thickness, transmittance, transparency, water content, tensile strength, elongation at break and also antioxidant activity (p < 0.05). The antibacterial activity evaluation showed that edible film from a biocomposite of gelatin-pectin (75:25 and 50:50) with the addition of essential oil had an inhibitory effect on Salmonella. The biocomposite of the edible film made from gelatin-pectin and the addition of lemongrass essential oil have the potential to be developed as a food packaging material, especially for perishable food. Based on the result of the application of edible film to chicken breast, it also could maintain the quality of chicken breast during storage.

Characterization of a Graphene Oxide-Reinforced Whey Hydrogel as an Eco-Friendly Absorbent for Food Packaging

This study presents a structural analysis of a whey and gelatin-based hydrogel reinforced with graphene oxide (GO) by ultraviolet and visible (UV-VIS) spectroscopy, Fourier transform infrared spectroscopy (FT-IR), and X-ray diffraction (XRD). The results revealed barrier properties in the UV range for the reference sample (containing no graphene oxide) and the samples with minimal GO content of 0.66×10−3% and 3.33×10−3%, respectively, in the UV-VIS and near-IR range; for the samples with higher GO content, this was 6.67×10−3% and 33.33×10−3% as an effect of the introduction of GO into the hydrogel composite. The changes in the position of diffraction angles 2θ from the X-ray diffraction patterns of GO-reinforced hydrogels indicated a decrease in the distances between the turns of the protein helix structure due to the GO cross-linking effect. Transmission electron spectroscopy (TEM) was used for GO, whilst scanning electron microscopy (SEM) was used for the composite characterization. A novel technique for investigating the swelling rate was presented by performing electrical conductivity measurements, the results of which led to the identification of a potential hydrogel with sensor properties.

Optimization of low thermal treatments to increase hydrophilic phenols in the Alperujo liquid fraction

Hydrophilic phenols are the main bioactive compounds in alperujo. Among them, 3,4-Dihydroxyphenylglycol (DHPG), Hydroxytyrosol (HT) and Tyrosol (Ty), are the most relevant and deeply studied. These compounds exhibit high antioxidant capacity and a wide range of health benefits as well as technologically promising properties. Given that, their recovery represents an attractive opportunity to valorize this by-product. In this work low thermal treatments were applied to alperujo in order to obtain phenol-enriched liquid fractions. Optimization assays combining different levels of temperature (30 to 90 ºC), time (60 to 180 min) and water content (70 to 90%), followed by response surface methodologies were performed. The results indicated that by applying optimal conditions, is possible to obtain theoretical yields of Total phenols, DHPG, HT and Ty of 2.4, 957.8, 3.4 and 6.4 times greater, respectively, than raw dry alperujo. Interestingly, all the evaluated conditions can be reproduced with low investment in a standard olive oil industry.

Recent progress in pectin extraction and their applications in developing films and coatings for sustainable food packaging: A review

Perishable foods like fruits and vegetables, meat, fish, and dairy products have short shelf-life that causes significant postharvest losses, which poses a major challenge for food supply chains. Biopolymers have been extensively studied as sustainable alternatives to synthetic plastics, and pectin is one such biopolymer that has been used for packaging and preservation of foods. Pectin is obtained from abundantly available low-cost sources such as agricultural or food processing wastes and by products. This review is a complete account of pectin extraction from agro-wastes, development of pectin-based composite films and coatings, their characterizations, and their applications in food packaging and preservation. Compared to conventional chemical extraction, supercritical water, ultrasound, and microwave assisted extractions are a few examples of modern and more efficient pectin extraction processes that generate almost no hazardous effluents, and thus, such extraction techniques are more environment friendly. Pectin-based films and coatings can be functionalized with natural active agents such as essential oils and other phytochemicals to improve their moisture barrier, antimicrobial and antioxidant properties. Application of pectin-based active films and coatings effectively improved shelf-life of fresh cut-fruits, vegetables, meat, fish, poultry, milk, and other food perishable products.

Polysaccharides for Biodegradable Packaging Materials: Past, Present, and Future (Brief Review)

The ecological problems emerging due to accumulation of non-biodegradable plastics are becoming more and more urgent. This problem can be solved by the development of biodegradable materials which will replace the non-biodegradable ones. Among numerous approaches in this field, there is one proposing the use of polysaccharide-based materials. These polymers are biodegradable, non-toxic, and obtained from renewable resources. This review opens discussion about the application of polysaccharides for the creation of biodegradable packaging materials. There are numerous investigations developing new formulations using cross-linking of polymers, mixing with inorganic (metals, metal oxides, clays) and organic (dyes, essential oils, extracts) compounds. The main emphasis in the present work is made on development of the polymer blends consisting of cellulose, starch, chitin, chitosan, pectin, alginate, carrageenan with some synthetic polymers, polymers of natural origin, and essential oils.

Influence of Gelatin-Chitosan-Glycerol Edible Coating Incorporated with Chlorogenic Acid, Gallic Acid, and Resveratrol on the Preservation of Fresh Beef

Chlorogenic acid (CA), gallic acid (GA), and resveratrol (RES) were added to a gelatin (GEL)-chitosan (CHI)-glycerol (GLY) edible coating, and their effects on the coating of fresh beef preservation were investigated. The results revealed that CA had the most significant improvement effect on fresh beef preservation. The combination of GEL-CHI-GLY-CA preserved the color of the beef better and delayed the increase of the total volatile base nitrogen, even though its total phenolic content decreased at a faster rate during beef preservation. GA also improved the preservation effect as on the 12th day of storage, the beef samples treated with GEL-CHI-GLY-GA had the lowest thiobarbituric acid reactive substances (0.76 mg Malondialdehyde (MDA)/kg) and total viable count (6.0 log cfu/g). On the whole, though RES showed an improvement on beef preservation, the improvement was not as good as the other two polyphenols. After 12 days of storage, the beef samples treated with GEL-CHI-GLY-RES had a higher pH value (6.25) than the other two polyphenol treatmed groups. Overall, the three polyphenol-added combinations increased the shelf life of beef by approximately 3-6 days compared to the control group (treated GEL-CHI-GLY with distilled water).

Phenolic Compounds in Active Packaging and Edible Films/Coatings: Natural Bioactive Molecules and Novel Packaging Ingredients

In recent years, changing lifestyles and food consumption patterns have driven demands for high-quality, ready-to-eat food products that are fresh, clean, minimally processed, and have extended shelf lives. This demand sparked research into the creation of novel tools and ingredients for modern packaging systems. The use of phenolic-compound-based active-packaging and edible films/coatings with antimicrobial and antioxidant activities is an innovative approach that has gained widespread attention worldwide. As phenolic compounds are natural bioactive molecules that are present in a wide range of foods, such as fruits, vegetables, herbs, oils, spices, tea, chocolate, and wine, as well as agricultural waste and industrial byproducts, their utilization in the development of packaging materials can lead to improvements in the oxidative status and antimicrobial properties of food products. This paper reviews recent trends in the use of phenolic compounds as potential ingredients in food packaging, particularly for the development of phenolic compounds-based active packaging and edible films. Moreover, the applications and modes-of-action of phenolic compounds as well as their advantages, limitations, and challenges are discussed to highlight their novelty and efficacy in enhancing the quality and shelf life of food products.

Application of Gelatin in Food Packaging: A Review

Owing to the increasing environmental concerns and requirements for high-quality foods, edible films and coatings (based on proteins, polysaccharides, natural phenolic active substances, etc.) are being developed as effective alternatives to traditional plastic packaging. Gelatin is extracted from collagen. It is an ideal material for food packaging due to its versatile advantages such as low price, polymerization, biodegradability, good antibacterial and antioxidant properties, etc. However, gelatin film exists poor waterproof and mechanical properties, which limit its developments and applications in food packaging. Previous studies show that pure gelatin can be modified by adding active ingredients and incorporating them with bio-polymers to improve its mechanical properties, aiming to achieve the desirable effect of preservation. This review mainly shows the preparation and molding ways of gelatin-based edible films and the applications of gelatin modified with other biopolymers. Furthermore, this review provides the latest advances in gelatin-based biodegradable packaging and food applications that exhibit outstanding advantages in food preservation.

Green Coating Polymers in Meat Preservation

Edible coatings, including green polymers are used frequently in the food industry to improve and preserve the quality of foods. Green polymers are defined as biodegradable polymers from biomass resources or synthetic routes and microbial origin that are formed by mono- or multilayer structures. They are used to improve the technological properties without compromising the food quality, even with the purpose of inhibiting lipid oxidation or reducing metmyoglobin formation in fresh meat, thereby contributing to the final sensory attributes of the food and meat products. Green polymers can also serve as nutrient-delivery carriers in meat and meat products. This review focuses on various types of bio-based biodegradable polymers and their preparation techniques and applications in meat preservation as a part of active and smart packaging. It also outlines the impact of biodegradable polymer films or coatings reinforced with fillers, either natural or synthesized, via the green route in enhancing the physicochemical, mechanical, antimicrobial, and antioxidant properties for extending shelf-life. The interaction of the package with meat contact surfaces and the advanced polymer composite sensors for meat toxicity detection are further considered and discussed. In addition, this review addresses the research gaps and challenges of the current packaging systems, including coatings where green polymers are used. Coatings from renewable resources are seen as an emerging technology that is worthy of further investigation toward sustainable packaging of food and meat products.

Fabrication and performance evaluation of pectin-fish gelatin-resveratrol preservative films

Resveratrol-loaded fish gelatin (FG)-low methoxyl pectin (LMP) composite films with different FG:LMP mass ratios were prepared and evaluated as food packaging materials. With increasing FG contents, the water solubility of the films decreased. Moreover, the UV (315-400 nm) blocking efficiency and opacity increased with increasing LMP contents. The elongation of the films at breaking and tensile strengths were adjusted using the ratio of FG and LMP. The lowest water vapour permeability was observed at an FG:LMP mass ratio of 2:1. All films exhibited good antioxidant properties and significantly delayed oil deterioration when used for beef tallow preservation. The release behaviour of resveratrol in 95% ethanol as a food simulant was determined by film composition. The fabricated films exhibit significant potential for beef tallow preservation applications. Furthermore, LMP can improve the stability of resveratrol-FG complexes and compete with resveratrol for binding FG to accelerate resveratrol release.

Edible Films on Meat and Meat Products

In 2018, the worldwide consumption of meat was 346.14 million tonnes, and this is expected to increase in the future. As meat consumption increases, the use of packaging materials is expected to increase along with it. Petrochemical packaging materials which are widely used in the meat processing industry, take a long time to regenerate and biodegrade, thus they adversely affect the environment. Therefore, the necessity for the development of eco-friendly packaging materials for meat processing, which are easily degradable and recyclable, came to the fore. The objective of this review is to describe the application of natural compound-derived edible films with their antioxidant and antibacterial activities in meat and meat products. For several decades, polysaccharides (cellulose, starch, pectin, gum, alginate, carrageenan and chitosan), proteins (milk, collagen and isolated soy protein) and lipids (essential oil, waxes, emulsifiers, plasticizers and resins) were studied as basic materials for edible films to reduce plastic packaging. There are still high consumer demands for eco-friendly alternatives to petrochemical-based plastic packaging, and edible films can be used in a variety of ways in meat processing. More efforts to enhance the physiological and functional properties of edible films are needed for commercial application to meat and meat products.

Olive Tree Derivatives and Hydroxytyrosol: Their Potential Effects on Human Health and Its Use as Functional Ingredient in Meat

Olive (Olea europaea) is one of the most extensive crops in the Mediterranean countries, and an important source of extra distinctive compounds that has been widely tested due to its known health benefits. Olive derivatives, such as extra virgin olive oil (EVOO) and olive leaves are rich in antioxidant compounds such as hydroxytyrosol (HXT) and oleuropein and oleic acid, as main monounsaturated fatty acid. Because of HXT molecular structure, its regular consumption reports important beneficial properties such as anti-inflammatory, antimicrobial, antioxidant, and anticancer. As a matter of fact, its antioxidant and antimicrobial effects made this compound a good preservative agent against meat deterioration and spoilage, capable of replacing some synthetic additives whose continued and regular consumption may negatively affect the human health. On the contrary side, this extract has an unpleasant odor and flavor, so a synthetic source of HXT could also be used to improve the sensory quality of the meat products. In this sense, this review exposes the health benefits provided by the consumption of EVOO and HXT, and the newest research about its application on meat, together new trends about its use as functional ingredient in meat and meat products.

The effect of Thymus vulgaris and Thymbra spicata essential oils and/or extracts in pectin edible coating on the preservation of sliced bolognas

The aim of this research was to determine the effect of pectin coating made with essential oils and/or extracts of Thymus vulgaris (thyme) and Thymbra spicata (thymbra) on the preservation of aerobically packaged sliced bolognas during cold storage. The treatment made with essential oils resulted in a reduction of 1.73 log CFU/g of Salmonella typhimurium ATCC 14028. Also, pectin coating made with essential oil-treated sliced bolognas had the lowest total mesophilic bacteria (6.27 log CFU/g), and total lactic acid bacteria (1.72 CFU/g), in comparison to non-treated bolognas, with 7.65 log CFU/g for total mesophilic bacteria and 4.99 log CFU/g for lactic acid bacteria. Application of an emulsion significantly (P < 0.05) affected L*(lightness), a*(redness), and b*(yellowness) values. The essential oil treatment had the highest TBARS values at the end of the storage period. The pH was not affected by the treatment (P > 0.05), but storage had a significant (P < 0.05) effect on the pH values.

Recent advances in utilization of pectins in biomedical applications: a review focusing on molecular structure-directing health-promoting properties

The numerous health benefits of pectins justify their inclusion in human diets and biomedical products. This review provides an overview of pectin extraction and modification methods, their physico-chemical characteristics, health-promoting properties, and pharmaceutical/biomedical applications. Pectins, as readily available and versatile biomolecules, can be tailored to possess specific functionalities for food, pharmaceutical and biomedical applications, through judicious selection of appropriate extraction and modification technologies/processes based on green chemistry principles. Pectin's structural and physicochemical characteristics dictate their effects on digestion and bioavailability of nutrients, as well as health-promoting properties including anticancer, immunomodulatory, anti-inflammatory, intestinal microflora-regulating, immune barrier-strengthening, hypercholesterolemia-/arteriosclerosis-preventing, anti-diabetic, anti-obesity, antitussive, analgesic, anticoagulant, and wound healing effects. HG, RG-I, RG-II, molecular weight, side chain pattern, and degrees of methylation, acetylation, amidation and branching are critical structural elements responsible for optimizing these health benefits. The physicochemical characteristics, health functionalities, biocompatibility and biodegradability of pectins enable the construction of pectin-based composites with distinct properties for targeted applications in bioactive/drug delivery, edible films/coatings, nano-/micro-encapsulation, wound dressings and biological tissue engineering. Achieving beneficial synergies among the green extraction and modification processes during pectin production, and between pectin and other composite components in biomedical products, should be key foci for future research.

Protein-based natural antibacterial materials and their applications in food preservation

Plastics materials used for food packaging are recalcitrant, leading to a growing global environmental problem, which arouses the attention of environmental protection departments in many countries. Therefore, to meet the increasing demand for sustainable and environment‐friendly consumer products, it is necessary for the food industry to develop natural antibacterial materials for food preservation. This review summarizes the common biodegradable natural antimicrobial agents and their applications in food preservation; as well as an overview of five commonly used biodegradable protein‐based polymers, such as zein, soy protein isolate, gelatin and whey protein, with special emphasis on the advantages of protein‐based biopolymers and their applications in food packaging industry.

Application of Antioxidants as an Alternative Improving of Shelf Life in Foods

Oxidation is the main problem in preserving food products during storage. A relatively novel strategy is the use of antioxidant-enriched edible films. Antioxidants hinder reactive oxygen species, which mainly affect fats and proteins in food. At present, these films have been improved by the addition of micro- and nanoliposomes coated with carbohydrate polymers, which are not hazardous for human health and can be ingested without risk. The liposomes are loaded with different antioxidants, and their effects are observed as a longer storage time of the food product. The synergy of these methodologies and advances can lead to the displacement of the protective packaging used currently, which would result in food products with functional properties added by the films, an increase in shelf life, and an improvement to the environment by reducing the amount of waste.

Analytical Characterization of Water-Soluble Constituents in Olive-Derived By-Products

Olive trees constitute one of the largest agroindustries in the Mediterranean area, and their cultivation generates a diverse pool of biomass by-products such as olive tree pruning (OTP), olive leaves (OL), olive stone (OS), and extracted olive pomace (EOP). These lignocellulosic materials have varying compositions and potential utilization strategies within a biorefinery context. The aim of this work was to carry out an integral analysis of the aqueous extractives fraction of these biomasses. Several analytical methods were applied in order to fully characterize this fraction to varying extents: a mass closure of >80% was reached for EOP, >76% for OTP, >65% for OS, and >52% for OL. Among the compounds detected, xylooligosaccharides, mannitol, 3,4-dihydroxyphenylglycol, and hydroxytyrosol were noted as potential enhancers of the valorization of said by-products. The extraction of these compounds is expected to be more favorable for OTP, OL, and EOP, given their high extractives content, and is compatible with other utilization strategies such as the bioconversion of the lignocellulosic fraction into biofuels and bioproducts.

Strategies to Broaden the Applications of Olive Biophenols Oleuropein and Hydroxytyrosol in Food Products

Oleuropein (OLE) and hydroxytyrosol (HT) are olive-derived phenols recognised as health-promoting agents with antioxidant, anti-inflammatory, cardioprotective, antifungal, antimicrobial, and antitumor activities, providing a wide range of applications as functional food ingredients. HT is Generally Recognised as Safe (GRAS) by the European Food Safety Authority (EFSA) and the Food and Drug Administration (FDA), whereas OLE is included in EFSA daily consumptions recommendations, albeit there is no official GRAS status for its pure form. Their application in food, however, may be hindered by challenges such as degradation caused by processing conditions and undesired sensorial properties (e.g., the astringency of OLE). Among the strategies to overcome such setbacks, the encapsulation in delivery systems and the covalent and non-covalent complexation are highlighted in this review. Additionally, the synthesis of OLE and HT derivatives are studied to improve their applicability. All in all, more research needs however to be carried out to investigate the impact of these approaches on the sensory properties of the final food product and its percussions at the gastrointestinal level, as well as on bioactivity. At last limitations of these approaches at a scale of the food industry must also be considered.

Edible packaging: Sustainable solutions and novel trends in food packaging

Novel food packaging techniques are an important area of research to promote food quality and safety. There is a trend towards environmentally sustainable and edible forms of packaging. Edible packaging typically uses sustainable, biodegradable material that is applied as a consumable wrapping or coating around the food, which generates no waste. Numerous studies have recently investigated the importance of edible materials as an added value to packaged foods. Nanotechnology has emerged as a promising method to provide use of bioactives, antimicrobials, vitamins, antioxidants and nutrients to potentially increase the functionality of edible packaging. It can act as edible dispensers of food ingredients as encapsulants, nanofibers, nanoparticles and nanoemulsions. In this way, edible packaging serves as an active form of packaging. It plays an important role in packaged foods by desirably interacting with the food and providing technological functions such as releasing scavenging compounds (antimicrobials and antioxidants), and removing harmful gasses such as oxygen and water vapour which all can decrease products quality and shelf life. Active packaging can also contribute to maintaining the nutritive profile of packaged foods. In this review, authors present the latest information on new technological advances in edible food packaging, their novel applications and provide examples of recent studies where edible packaging possesses also an active role.

Anti-Inflammatory and Antioxidant Activity of Hydroxytyrosol and 3,4-Dihydroxyphenyglycol Purified from Table Olive Effluents

New liquid effluents based on the use of acetic acid in the table olive industry make it easier to extract bioactive compounds to be used for food, cosmetic, and pharmaceutical purposes. The use of water acidified with acetic acid or in brine with or without acetic acid for storing the table olive enhances the extraction of two more active phenolic compounds: hydroxytyrosol (HT) and 3,4-dihydroxyphenylglycol (DHPG). This work has two aims: (1) measure the solubilization of phenolics controlled for two years using more than thirty olive varieties with different ripeness index as a potential source of HT and DHPG, and (2) evaluate the anti-inflammatory activity of the purified phenolics. The effluents with a higher concentration of phenolics were used for the extraction of HT and DHPG in order to evaluate its antioxidant and anti-inflammatory activity in vitro by the determination of pro-inflammatory cytokines such as Human Tumor Necrosis Factor-α (TNF), Interleukin-6 (IL-6), and Interleukin-1β (Il-1β). The anti-inflammatory activity of these phenolic extracts was demonstrated by studying the expression of cytokines by qPCR and the levels of these proteins by enzyme-linked immunosorbent assay (ELISA).

Bio-based active food packaging materials: Sustainable alternative to conventional petrochemical-based packaging materials

In food industry, a growing concern is the use of suitable packaging material (i.e., biodegradable coatings and films) with enhanced thermal, mechanical and barrier characteristics to prevent from contamination and loss of foodstuff. Biobased polymer resources can be used for the development of biodegradable bioplastics. To achieve this goal, biopolymers should be economic, renewable and abundantly available. Bioplastic packaging materials based on renewable biomass could be used as sustainable alternative to petrochemically-originated plastic materials. This review summarizes the recent advancements in biopolymer-based coatings and films for active food packaging applications. Microbial polymers (PHA and PLA), wood-based polymers (cellulose, hemicellulose, starch & lignin), and protein-based polymers (gelatin, keratin, wheat gluten, soy protein and whey protein isolates) were among the materials most widely exploited for the development of smart packaging films. These biopolymers are able to synthesize coatings and films with good barrier properties against food borne pathogens and the transport of gases. Biobased reinforcements e.g., plant essential oils and natural additives to bioplastic films improve oxygen barrier, antibacterial and antifungal properties. To induce the desired functionality the simultaneous utilization of different synthetic and biobased polymers in the form of composites/blends is also an emerging area of research. Nanoscale reinforcements into bioplastic packaging have also been reported to improve packaging characteristics ultimately increasing food shelf life. The development of bioplastic/biocomposite and nanobiocomposites exhibits high potential to replace nonbiodegradable materials with characteristics comparable to fossil-based plastics, additionally, giving biodegradable and compostable characteristics. The idea of utilization of renewable biomass and the implications of biotechnology can firstly reduce the burden from fossil-resources, while secondly promoting biobased economy.

Phenolic Compounds Obtained from Olea europaea By-Products and their Use to Improve the Quality and Shelf Life of Meat and Meat Products-A Review

Consumers are interested in consuming clean label foods. Replacing synthetic additives with natural alternatives (especially sources rich in polyphenols) is a valid solution to produce and also preserve foods, especially meat and meat products. Olea europaea leaves and olive pomace and wastewater contain polyphenols that can be explored in this context. In this review, we summarize the main aspects related to the phenolic composition, extraction conditions, antimicrobial potential, and antioxidant activity (in vitro and in vivo) of Olea europaea leaves, olive pomace and wastewater as well as their applications in the production of meat and meat products. This review found evidence that extracts and isolated polyphenols from the Olea europaea tree and olive processing by-products can be explored as natural antioxidant and antimicrobial additives to improve the preservation of meat and meat products. The polyphenols found in these residues (especially oleuropein, hydroxytyrosol and tyrosol) increased the redox state in the main meat-producing animals and, consequently, the oxidative stability of fresh meat obtained from these animals. Moreover, the extracts and isolated polyphenols also improved the shelf life of fresh meat and meat products (as additive and as active component in film) by delaying the growth of microorganisms and the progression of oxidative reactions during storage. The accumulated evidence supports further investigation as a natural additive to improve the preservation of reformulated muscle products and in the production of edible and sustainable films and coatings for fresh meat and meat products.

Characterization and Application of Gelatin Films with Pecan Walnut and Shell Extract (Carya illinoiensis)

Phenolic compounds that come from natural products are a good option for minimizing lipid oxidation. It should be noted that these are not only introduced directly into the food, but also incorporated into edible biofilms. In contact with food, they extend its useful life by avoiding contact with other surface and preventing deterioration air, one of the main objectives. In particular, gelatin is a biopolymer that has a great potential due to its abundance, low cost and good film-forming capacity. The aim of this study has been to design and analyse gelatin films that incorporate bioactive compounds that come from the walnut and a by-product, the walnut shell. The results showed that mechanical and water vapor barrier properties of the developed films varied depending on the concentration of the walnut, shell and synthetic antioxidant. With increasing walnut concentration (15%) the permeability to water vapor (0.414 g·mm/m2·day·Pascal, g·mm/m2·day·Pa) was significantly lower than the control (5.0368 g·mm/m2·day·Pa). Furthermore, in the new films the elongation at the break and Young's modulus decrease by six times with respect to the control. Films with pure gelatin cannot act as an antioxidant shield to prevent food oxidation, but adding pecan walnut (15% concentration) presents 30% inhibition of the DPPH stable radical. Furthermore, in the DSC, the addition of walnut (15 and 9% concentrations), showed the formation of big crystals; which could improve the thermal stability of gelatin films. The use of new gelatin films has shown good protection against the oxidation of beef patties, increasing the useful lifetime up to nine days, compared to the control (3-4 days), which opens up a big field to the commercialization of meat products with lower quantities of synthetic products.