Contributions of tenderness, juiciness and flavor liking to overall liking of beef in Europe

Consumer eating quality and physicochemical traits of pork Longissimus and Semimembranosus differed between genetic lines

Pork eating quality is affected by various factors. In this study, Longissimus thoracis et lumborum (LTL) and Semimembranosus (SM) muscles from seven genetic lines (PM-LR - Pure maternal, Landrace-type; PM-LW - Pure maternal, Large White-type; PM-D - Pure maternal, Duroc-type; PT-D - Pure terminal, Duroc-type; PT-LW - Pure terminal, Large White-type; PT-LR - Pure Terminal, Landrace-type; Comp-P × LW × D - Composite Terminal - Pietran × Large white × Duroc) were analyzed for pH, intramuscular fat (IMF) content, and collagen content and solubility. A consumer sensory test using check-all-that-apply (CATA) and biometric approaches was also conducted. The results showed that the IMF content of line PM-D was the highest (P = 0.004), while line PT-LW received the highest score in tenderness, liking of flavor, purchase intent, and quality grading (P < 0.05). Line PM-LR and PT-LR showed the lowest IMF content and were least preferred by consumers. Compared to LTL, SM showed higher pH, collagen solubility, and sensory scores in tenderness, juiciness, liking of flavor, and overall liking (P < 0.05). Different muscles and lines were associated with different CATA terms but not with differences in consumer emotional responses. pH positively influenced tenderness, juiciness, and overall liking (P < 0.05), but IMF and collagen had little effect. The flavor was the most important sensory attribute contributing to overall liking, followed by tenderness. Genetic line and muscle affected pork chemical properties and eating quality. The findings are important for the Australian pork industry to improve the eating quality of their products.

Relationships between European carcass evaluation and Meat Standards Australia grading scheme applied to young beef cattle

The European carcass grading scheme (EUROP) places large emphasis on meat yield and therefore on quantitative traits such as carcass conformation and superficial fat coverage. However, it falls short in considering sensory properties and consumer satisfaction. In contrast, the Meat Standards Australia (MSA) grading scheme considers, among others, animals' ossification, marbling, and ultimate pH as primary indicators of beef eating quality. This study aims to characterize MSA carcass grading scheme applied to the Italian beef production system, considering its significant role in European beef market. The study involved 3204 Charolais, Limousin, and crossbred young bulls and heifers slaughtered in a commercial Italian abattoir. Data collection spanned a broad range of variables, including animal characteristics, MSA traits, and EUROP carcass grading traits. Regardless of the sex of the animal, no significant relationship was observed between MSA traits and EUROP carcass grading scores. Factors such as sex, age, and arrival season at the fattening unit significantly affected most of MSA traits. Females had significantly higher marbling score, and lower ossification score and hump height than males. Animals imported in autumn and winter had significantly lower marbling score, but similar ossification score compared to those imported in spring and summer. Older females had the highest marbling scores. While further research is needed to assess whether the MSA grading scheme can be adapted to all different European rearing systems, results of this study are a prelude to the potential benefits that the MSA grading scheme can bring to the European beef industry.

Discrimination of beef composition and sensory quality by using rapid Evaporative Ionisation Mass Spectrometry (REIMS)

Herein, we investigated the potential of REIMS analysis for classifying muscle composition and meat sensory quality. The study utilized 116 samples from 29 crossbred Angus × Salers, across three muscle types. Prediction models were developed combining REIMS fingerprints and meat quality metrics. Varying efficacy was observed across REIMS discriminations - muscle type (71 %), marbling level (32 %), untrained consumer evaluated tenderness (36 %), flavor liking (99 %) and juiciness (99 %). Notably, REIMS demonstrated the ability to classify 116 beef across four Meat Standards Australia grades with an overall accuracy of 37 %. Specifically, "premium" beef could be differentiated from "unsatisfactory", "good everyday" and "better than everyday" grades with accuracies of 99 %, 84 %, and 62 %, respectively. Limited efficacy was observed however, in classifying trained panel evaluated sensory quality and fatty acid composition. Additionally, key predictive features were tentatively identified from the REIMS fingerprints primarily comprised of molecular ions present in lipids, phospholipids, and amino acids.

Crucial textural properties of braised pork to evaluate the oral mastication behavior and its water distribution to influence tenderness

The complex composition of braised pork, including lean meat, pigskin, and fat, makes it difficult for sensory evaluation of its texture properties. This study investigated the correlation between sensory texture attributes and physicochemical properties to achieve an objective and comprehensive evaluation of the texture of braised pork. Sensory analysis demonstrated that the overall texture acceptability of braised pork was significantly and negatively influenced by sensory texture attributes (including sensory hardness, chewiness, and toughness), while it was positively impacted by sensory adhesiveness, softness, and juiciness. Shear force and texture profile analysis (TPA) variables, reflecting mastication behavior, were used to characterize the textural properties of braised pork. They were closely related to water distribution, with a higher proportion of immobilized water (P21), indicating a higher water holding capacity and a more tender texture. Correlation analysis between sensory texture attributes and physicochemical properties through partial least squares regression further revealed significant associations between shear force, TPA variables, and sensory texture attributes. Moreover, the proportion of immobilized water (P21) significantly and negatively affected sensory hardness and chewiness, whereas the proportion of free water (P22) significantly influenced sensory toughness. Sensory texture attributes could be well predicted by the physicochemical properties by projecting test samples onto calibration models established by known samples. Therefore, a combination of sensory and instrumental measures can reliably reflect the texture properties of braised pork. PRACTICAL APPLICATION: The combination of sensory and instrumental methods is an effective strategy to accurately and objectively evaluate the texture properties of braised pork, which overcomes the limitations caused by the complexity of the composition and texture traits of braised pork. The accurate evaluation and standardization of texture properties is an important premise for the repeatable and stable cooking of traditional braised pork. Furthermore, this research method and findings can also be applied to guide the procedural optimization of smart appliances (e.g., induction cookers) for cooking braised pork.

A comprehensive study of sous-vide cooked Korat chicken breast processed by various conditions: texture, compositional/structural changes, and consumer acceptance

Korat chicken (KC) is a slow-growing crossbreed renowned for its excellent growth and firm texture. This study investigated the effect of various sous-vide (SV) conditions (60 and 70°C, 1-3 h) on their texture, protein structure and degradation, as well as consumer acceptability, with the traditional boiling served as control. Texture showed significant improvement under all SV conditions compared to the control, as demonstrated by increased water holding capacity (WHC), cooking loss, and decreased shear force, hardness, and chewiness (P < 0.05). These changes corresponded to the higher sensory scores (P < 0.05). Among the SV samples, increased temperatures and longer cooking times led to higher degradation of myofibrils and connective tissue, as evidenced by a decrease in water-, salt-soluble proteins, and soluble collagen (P < 0.05). These findings aligned with the scanning electron microscopy (SEM) results, which showed a looser muscle structure in the meat under more intense cooking conditions. Based on synchrotron radiation-based Fourier transform infrared (SR-FTIR) results, a gradual increase in antiparallel forms within the amide I bands (1,700-1,600 cm-1) of the total spectra with higher temperature and longer cooking times was observed (P < 0.05), while the fluctuations were observed in the changes of α-helix, β-sheet, and β-turn structures. This suggested that the antiparallel structure represented a looser configuration developing during intense SV cooking. Combined with the principal component analysis (PCA) results, the findings indicated that the suitable SV condition for KC breast meat was 70°C for varying durations (1-3 h), as it showed the strongest correlation with sensory scores, particularly in terms of tenderness. In summary, these findings provided a better understanding of molecular changes and discovered SV conditions to enhance the texture quality of the KC meat.

A current review of U.S. beef flavor I: Measuring beef flavor

Historically, consumer acceptance of beef was determined by tenderness. Developments in genetics and management over the last couple of decades have improved tenderness to the point that it is secondary to other factors in beef's taste. Flavor, however, is an extraordinarily complex taste attribute dependent on biological sensors in the mouth, sinus cavity, and jaws. The culinary industry has recently focused on innovative ways to give consumers new products satisfying their curiosity about different foods, especially proteins. Competition from plant-based, cell-based, and even other animal-based proteins provides diversity in consumers' ability to select a protein that satisfies their desire to include unique products in their diet. Consequently, the beef industry has focused on flavor for the last 10 to 15 years to determine whether it can provide the guardrails for beef consumption in the future. The U.S. beef industry formed a Flavor Working Group in 2012 composed of the authors listed here to investigate new and innovative ways to manage and measure beef flavor. The results of this working group have resulted in dozens of papers, presentations, abstracts, and symposia. The objective of this manuscript is to summarize the research developed by this working group and by others worldwide that have investigated methodologies that measure beef flavor. This paper will describe the strengths of the research in beef flavor measurement and point out future needs that might be identified as technology advances.

Beef-on-dairy: Meat quality of veal and prediction of intramuscular fat using the Q-FOM™ Beef camera at the 5th-6th thoracic vertebra

This study aims to describe the meat quality of young Holstein (HOL) beef-on-dairy heifers and bulls sired by Angus (ANG, n = 109), Charolais (CHA, n = 101) and Danish Blue (DBL, n = 127), and to investigate the performance of the handheld vision-based Q-FOM™ Beef camera in predicting the intramuscular fat concentration (IMF%) in M. longissimus thoracis from carcasses quartered at the 5th-6th thoracic vertebra. The results showed significant differences between crossbreeds and sexes on carcass characteristics and meat quality. DBL × HOL had the highest EUROP conformation scores, whereas ANG × HOL had darker meat with higher IMF% (3.52%) compared to CHA × HOL (2.99%) and DBL × HOL (2.51%). Bulls had higher EUROP conformation scores than heifers, and heifers had higher IMF% (3.70%) than bulls (2.31%). These findings indicate the potential for producing high-quality meat from beef-on-dairy heifers and ANG bulls. The IMF% prediction model for Q-FOM performed well with R2 = 0.91 and root mean squared error of cross validation, RMSECV = 1.33%. The performance of the prediction model on the beef-on-dairy veal subsample ranging from 0.9 to 7.4% IMF had lower accuracy (R2 = 0.48) and the prediction error (RMSEveal) was 1.00%. When grouping beef-on-dairy veal carcasses into three IMF% classes (2.5% IMF bins), 62.6% of the carcasses were accurately predicted. Furthermore, Q-FOM IMF% predictions and chemically determined IMF% were similar for each combination of sex and crossbreed, revealing a potential of Q-FOM IMF% predictions to be used in breeding, when aiming for higher meat quality.

The Meat Standards Australia carcass grading site affects assessment of marbling and prediction of meat-eating quality in growing European beef cattle

The lack of consumer feedback on beef eating quality contributes to reduced beef consumption in Europe. The Meat Standards Australia (MSA) grading scheme can assess the palatability of beef carcasses usually graded at the 10th thoracic vertebrae. However, the European beef industry relies on late-maturing breeds usually cut at the 5th vertebrae due to commercial reasons. Data from 55 young bulls and heifers of late-maturing breeds were collected in an Italian slaughterhouse following the MSA guidelines at both carcass grading sites and sides. Intramuscular fat levels were assessed through two scores and used with other variables to feed the MSA model, which predicts the MSA index, the meat-eating quality scores (MQ4) for 5 muscles and for each carcass grading site × side combination. The scores were analyzed using a mixed linear model. A correlation analysis was conducted to predict the variables measured at the 10th site using their correspondent at the 5th carcass grading site. A stepwise regression was conducted to understand the weight of each measured variable on marbling and MQ4 scores measured both at 5th and 10th carcass grading sites. Results showed significantly higher value for the studied traits at the 5th carcass grading site, while carcass side had no significant impact. The equations had high predictive capability and MSA marbling score played a key role in explaining the variability across carcass grading sites. The differences in marbling and MQ4 scores between the carcass grading sites suggest considering this factor if the MSA grading system will be applied to Europe.

Muscle biopsy long-chain omega-3 polyunsaturated fatty acid compositions, IMF and FMP in Australian pasture-based Bowen Genetics Forest Pastoral Angus, Hereford, and Wagyu Beef Cattle

BACKGROUND

We investigated breed and gender variations in the compositions of long-chain (≥ C20) omega-3 polyunsaturated fatty acids (LC omega-3 PUFA), fat melting point (FMP) and intramuscular fat (IMF) contents in biopsy samples of the M. longissimus dorsi muscle of grazing beef cattle. The hypothesis that biopsy compositions of health-beneficial LC omega-3 PUFA, FMP and IMF in a pasture-based production system will vary with breed, was tested. Muscle biopsies were taken from 127 yearling pasture-based Angus, Hereford, and Wagyu heifers and young bulls exclusive to the Australian Bowen Genetics Forest Pastoral breeding stud averaging 12 ± 2.43 months of age and under the same management routine.

RESULTS

Breed had a significant influence on IMF, FMP, and the compositions of oleic acid, α-linolenic acid (ALA), eicosapentaenoic (EPA), docosahexaenoic (DHA), docosapentaenoic (DPA), and total EPA + DHA + DPA in the M. longissimus dorsi muscle biopsies (P ≤ 0.03). The Wagyu breed had the highest (11.1%) and Hereford the lowest (5.9%) IMF (P = 0.03). The reverse trend was observed in FMP values where the Hereford breed had the highest (55 °C), Angus intermediate (46.5 °C), and Wagyu the lowest (33 °C) FMP. The Wagyu and Angus breeds had similar oleic fatty acid (18:1n-9) content, while the Hereford breed had the lowest (P < 0.01). The highest ALA, DPA, total EPA + DHA, total EPA + DHA + DPA and total ALA + EPA + DHA + DPA contents were detected in the Wagyu breed (P ≤ 0.03). The Hereford had similar EPA and DPA contents to the Angus (P ≥ 0.46). Total EPA + DHA + DPA contents in Wagyu, Angus, and Hereford were 28.8, 21.5, and 22.1 mg/100g tissue (P = 0.01), respectively. Sex was an important source of variation that influenced LC omega-3 PUFA composition, FMP and IMF, where yearling heifers had higher IMF (11.9% vs 5.3%), lower FMP (33°C vs 37°C), and higher LC omega-3 PUFA than bulls.

CONCLUSION

All the results taken together indicate that the Wagyu breed at 28.8 mg/100g tissue, was the closest to meeting the Australia and New Zealand recommended source level threshold of 30 mg/100g tissue of health-beneficial ≥ C20 omega-3 FA content. Since gender was a significant determinant of LC omega-3 PUFA composition, IMF content and FMP, it should be factored into enhancement strategies of healthy meat eating quality traits in grazing cattle. These findings also suggest that the Bowen Genetics Forest Pastoral beef cattle studs are important sources of LC omega-3 PUFA that can be used to cover the deficit in these health claimable fatty acids in Western diets.

Sensory quality of beef with different ultimate pH values - A Brazilian perspective

This study evaluated Brazilian consumer perceptions of beef with different pH values at 48 h post-mortem (pHu) through sensory analysis. A total of 138 consumers evaluated raw and grilled steaks. The steaks were divided according to their pHu (normal pH < 5.8, atypical darkness, firmness, and dryness [DFD] > 5.8 pH < 6, and typical DFD pH ≥ 6). There was no difference in the visual evaluation of raw steaks or purchase intention. Evaluation of the grilled steaks showed that consumers preferred typical DFD steaks in terms of tenderness, and there was a tendency for the same behavior in terms of juiciness. No differences were observed in other evaluated parameters. Cluster analysis identified three consumer segments for visual evaluation, indicating a preference for steaks with higher pHu in terms of freshness. Additionally, four segments were identified for evaluation, with some groups expressing a preference for higher pHu meat in terms of freshness appearance, tenderness liking, and overall liking. The developed regression models for overall liking and purchase intention exhibited favorable adjustment indices, with r2 values of 0.86 and 0.57, respectively, for raw steaks and 0.90 for grilled steaks for in overall liking. Regression models indicated a strong influence of color and freshness appearance, in addition to tenderness liking and juiciness liking, on the overall liking scores of consumers. These results indicate that Brazilian consumers do not dislike dark cutting and, despite differentiating their greater tenderness, do not show a preference between the different pHu values.

Prediction of beef tenderness and juiciness using consumer and descriptive sensory attributes

The impact of different cooking methods, degree of doneness, cuts, and marbling scores on beef juiciness and tenderness have been examined. However, relationships between tenderness and juiciness, the two major components of beef texture, for descriptive and consumer sensory data with Warner-Bratzler shear force (WBSF) and overall consumer liking have not been elucidated using US consumers recently. The objective was to use two data sets that measured consumer sensory and beef descriptive tenderness and juiciness attributes to understand relationships between consumer and trained descriptive tenderness and juiciness attributes, and Warner-Bratzler shear force (WBSF) and overall consumer liking. Data were analyzed in two sets, top loin steaks (n = 119) or beef cuts (n = 276) that included top loin steaks, tenderloin steaks, top sirloin steaks, and bottom round roasts. Average WBSF values for top loin steaks and beef cuts were 26.0 and 28.5 N, respectively. Consumer attributes were not strong predictors of WBSF. WBSF was more highly related to descriptive tenderness ratings (R2 = 0.37 for beef cuts). Overall liking was correlated to consumer attributes, most strongly to flavor liking (R2 = 0.94 for beef cuts). Descriptive and consumer juiciness ratings did not appreciably improve predictability of regression equations for either WBSF or consumer overall liking. These results indicated that using a WBSF value of 28 N or less for beef cuts would provide assurance for moderately tender beef as defined by descriptive sensory evaluation, and WBSF values between 30 and 32 N were slightly tender (as defined by descriptive sensory evaluation). Beef with WBSF values of 40 or higher were defined as slightly tough or tougher.

Effects of Salt Soaking Treatment on the Deodorization of Beef Liver and the Flavor Formation of Beef Liver Steak

In this study, based on the evaluation of fishy value and sensory evaluation, this study determined that soaking in a 1% salt solution for 60 min had a significant impact on the deodorization of beef liver (p < 0.05). The results showed that salt infiltration promoted the release of fishy substances, improving the edible and processing performance of beef liver. The identification of flavor compounds in raw and roasted beef liver via GC-IMS implies that (E)-2-octenal-M, (E)-3-penten-2-one-M, ethyl acetate-M, ethyl acetate-D, and methanethiol are closely related to improving the flavor of beef liver; among them, (E)-2-octenal-M, (E)-3-penten-2-one-M, and methanethiol can cause beef liver odor, while nonanal-M, octanal-M, benzene acetaldehyde, n-hexanol-D, butyl propanoate-M, heptanal-D, heptanal-M, and 3-methylthiopropanal-M had significant effects on the flavor formation of beef liver steak. The determination of reducing sugars revealed that salt soaking had no significant effect on the reducing sugar content of beef liver, and the beef liver steak was significantly reduced (p < 0.05), proving that reducing sugars promoted the formation of beef liver steak flavor under roasting conditions. Fatty acid determination revealed that salt soaking significantly reduced the content of polyunsaturated fatty acids in beef liver (p < 0.05), promoting the process of fat degradation and volatile flavor production in the beef liver steak. Salt plays a prominent role in salting-out and osmosis during deodorization and flavor improvement. Through controlling important biochemical and enzymatic reactions, the release of flavor substances in a food matrix was increased, and a good deodorization effect was achieved, which lays a foundation for further research on the deodorization of beef liver and the flavor of beef liver steak.

Descriptive beef flavor and texture attributes relationships with consumer acceptance of US light beef eaters

Consumer acceptance and overall liking has been shown to be related to beef instrumental and trained sensory attributes related to beef flavor, tenderness, and juiciness. Our objective was to understand the relationships between descriptive beef flavor and texture attributes, Warner-Bratzler shear force (WBSF), and consumer liking attributes for light US beef eaters. It is not known if light beef eaters have different drivers of overall liking. Treatments were created to differ in beef flavor and texture by utilizing different beef cuts (Choice top loin, high pH top loin, Select top sirloin, Choice tenderloin steaks, and Select and Choice bottom rounds roasts) cooked to 58 °C or 80 °C. Cooking methods included either a George Forman grill, food-service grill, or crock-pot. Cooking method, cut, and internal temperature impacted beef descriptive flavor and texture attributes, WBSF and consumer liking ratings (P ≤ 0.05) similarly. Descriptive juiciness and tenderness attributes were highly related to each other and with consumer juiciness and tenderness liking ratings. Consumer overall liking was closely related to descriptive fat-like, overall sweet, sweet and salty attributes. Musty/moldy, liver-like, and sour aromatic attributes were negatively associated with consumer liking. Overall flavor accounted for 85% of the variation in overall liking and tenderness liking contributed an additional 4%. While light beef eaters used different parts of the scale, they rated beef across treatments similarly. When beef flavor and texture descriptive attributes differed, consumer liking was impacted for light beef eaters.

Transcriptome, proteome and metabolome analysis provide insights on fat deposition and meat quality in pig

Intramuscular fat (IMF) content, which is an important determinant of meat quality characteristics such as tenderness, juiciness and flavor, has long been a research hotspot. Chinese local pig breeds are famous for their excellent meat quality which is mainly reflected in the high IMF content, strong hydraulic system and et al. However, there are few analysis of meat quality by omics methods. In our study, we identified 12 different fatty acids, 6 different amino acids, 1,262 differentially expression genes (DEGs), 140 differentially abundant proteins (DAPs) and 169 differentially accumulated metabolites (DAMs) (p < 0.05) with metabolome, transcriptome, and proteome. It has been found that DEGs, DAPs and DAMs were enriched in the Wnt signaling pathway, PI3K-Akt signaling pathway, Rap1 signaling pathway, and Ras signaling pathway which were related to meat quality. Moreover, our Weighted genes co-expression network construction (WGCNA) showed RapGEF1 was the key gene related to IMF content and the RT-qPCR analysis was used to perform validation of the significant genes. In summary, our study provided both fundamental data and new insights to further uncover the secret of pig IMF content.

Fungal Biostarter Effect on the Quality of Dry-Aged Beef

Meat aging is a process consisting of its storage in specific conditions which leads to an increase in its organoleptic qualities. The most common method of meat aging is the wet vacuum-bag based method, whereas the traditional method, called dry-aging, involves keeping meat at a low temperature for an extended time. However, this process is characterized by low repeatability of the results. Therefore, different approaches to stabilize the process are tested. The aim of this study was to analyze the influence of the Mucor flavus biostarter on the physicochemical characteristics and sensory quality of dry-aged beef (DAB). We hypothesized that a fungal biostarter positively influences the quality of DAB and stabilizes the dry-aging process. Meat control samples (N = 7) and samples inoculated with the Mucor flavus biostarter (N = 7), originating from 14 individuals crossbred from Holstein-Friesian cows with bulls of meat breeds, were put into the dry-aging fridge (DryAger, Bad Saulgau, Germany) for 28 days. The physicochemical parameters (pH, color parameters, WHC, GP (glycolytic potential), chemical composition of muscle, the content of malondialdehyde, shear force), muscular protein proteolysis (SDS-PAGE), sensory quality, and microbial composition of DAB were assessed after aging. The results showed a significant effect of the fungal biostarter on pH increase (0.25 units), and light myosin chain proteolysis (approximately 16%) as well as improvement of sensory quality (e.g., acceptability was improved by one unit in an applied scale 1-9). All together, the M. flavus-based biostarter was shown to increase the quality of DAB.

French consumer evaluation of eating quality of Angus x Salers beef: Effects of muscle cut, muscle slicing and ageing

Based on the Meat Standards Australia (MSA) methodology, the objectives of this study were to evaluate the eating quality of grass-fed Angus x Salers beef by French consumers, across different muscle cuts (m. triceps brachii caput longum, m. longissimus dorsi et thoracis and m. rectus abdominis), ageing times (5 and 14 days) and muscle slicing and grilling methods (being distinguished by 2 different sides on the grill), and to further quantify whether the MSA model could predict the eating quality of the meat produced by these lean crossbred animals. The results showed that French consumers can discern significant differences in eating quality traits across muscle cuts but not between ageing times and muscle slicing methods. In this study, the accuracy of eating quality score (MQ4)-assigned MSA grade was 64.5%. Due to the lack of MSA data on these lean crossbred animals, the prediction of eating quality from carcass characteristics was less accurate than usual. However, these results do indicate that the MSA sensory testing protocol, the MQ4 calculation and the MSA quality grades could be used to support a consumer-based quality grading system in France.

Effect of Cooking Method and Doneness Degree on Volatile Compounds and Taste Substance of Pingliang Red Beef

This study used gas chromatography-ion mobility spectrometry (GC-IMS) and high-performance liquid chromatography (HPLC) methods to examine the impact of cooking methods and doneness on volatile aroma compounds and non-volatile substances (fatty acids, nucleotides, and amino acids) in Pingliang red beef. The flavor substances' topographic fingerprints were established, and 45 compounds were traced to 71 distinct signal peaks. Pingliang red beef's fruity flavor was enhanced thanks to the increased concentration of hexanal, styrene, and 2-butanone that resulted from instant boiling. The levels of 3-methylbutanal, which contributes to the characteristic caramel-chocolate-cheese aroma, peaked at 90 min of boiling and 40 min of roasting. The FFA content was reduced by 28.34% and 27.42%, respectively, after the beef was roasted for 40 min and instantly boiled for 10 s (p > 0.05). The most distinctive feature after 30 min of boiling was the umami, as the highest levels of glutamate (Glu) (p < 0.05) and the highest equivalent umami concentration (EUC) values were obtained through this cooking method. Additionally, adenosine-5'-monophosphate (AMP) and inosine-5'-monophosphate (IMP) decreased with increasing doneness compared to higher doneness, indicating that lower doneness was favorable in enhancing the umami of the beef. In summary, different cooking methods and doneness levels can affect the flavor and taste of Pingliang red beef, but it is not suitable for high-doneness cooking.

Effect of Traditional Cooking and Sous Vide Heat Treatment, Cold Storage Time and Muscle on Physicochemical and Sensory Properties of Beef Meat

Consumers are avoiding the consumption of highly processed foods, aware of the negative effects of the additives or high temperatures used on the biological value of the food. This causes an interest in ways of minimal processing or low-temperature cooking procedures. However, to achieve the desired organoleptic quality, it is necessary to know the relationship between the parameters of the treatments and the type of raw material. The purpose of this study was to investigate the complex effects of traditional cooking and sous vide heat treatment, cold storage time and muscle on the physicochemical and sensory properties of beef. The study material consisted of samples of musculus longissimus thoracis and musculus semitendinosus obtained from beef half-carcasses. The muscles were subjected to traditional cooking in water at 95 °C until the temperature inside the piece reached 65 °C and sous vide treatment at 65 °C for 2 h. The study was performed after 2 and 21 days of cold storage. Instrumental evaluation of texture parameters, color and sensory evaluation of meat was carried out. Meat stored for 21 days was characterized by more favorable TPA test (Texture Profile Analysis) results compared to meat evaluated 48 h post mortem. The study also showed positive effects of sous vide heat treatment on texture parameters and sensory properties (especially on tenderness and palatability), as well as differences in the formation of quality traits between muscles. Given the trends associated with energy-saving technologies, it is desirable to seek the optimal combination of temperature and time of fixation treatments at an acceptable level of quality. The use of low-temperature cooking for as little as 2 h, yields positive results in sensory evaluation of juiciness, tenderness, or palatability.

The Colour, Composition and Eating Quality of Beef from Late- or Early-Maturing Suckler Bulls Finished at Pasture with or without Concentrate Supplementation

Carcasses from pasture-finished early-maturing (EM), rather than late-maturing (LM), breed bulls may be more suited to meet the minimum carcass fatness classification of 2+ (6.0 on a 15-point scale) required for some markets. The comparative colour and eating quality of beef from grass-fed bulls of different maturities are unknown. Sixty yearling suckler-bred bulls were assigned to a 2 (maturities: EM and LM) × 2 (finishing strategies: grass only (G0) or grass + 4.0 kg concentrate daily (GC)) factorial design. Bulls were at pasture from 7 April, concentrates were introduced (or not) 97 days later, and bulls were slaughtered at 192 d post-turnout (approximately 19 mo of age). Carcass fat scores averaged 5.02, 6.20, 6.33 and 7.30 for LMG0, LMGC, EMG0 and EMGC bulls, respectively. Muscle colour did not differ between treatments. Muscle from LM had lower intramuscular fat concentration, collagen solubility and a tendency (p < 0.1) towards lower ratings for tenderness, texture, and acceptability of 14 d aged beef. Concentrate supplementation decreased the ratings for muscle tenderness but ratings for acceptability were not affected. Achieving the minimum carcass fatness was therefore not required to produce beef of acceptable eating quality and suckler bulls can access the “grass-fed” beef market.

Evolution of Sensory Properties of Beef during Long Dry Ageing

Ageing is an essential step in obtaining meat with satisfactory sensory properties. Dry-ageing, although being a niche practice, is increasingly being developed to enhance the taste experience of meat consumers. In this work, we studied the kinetics of the evolution of muscle properties with increasing ageing time, in order to propose an optimal duration, allowing a compromise between quality and meat weight loss reduction. Our study was performed on 32 samples from 8 animals for which the Longissimus thoracis sensory properties were analysed at different stages of ageing (7, 16, 35 and 60-days post-slaughter). This work showed an increase in the dry matter content of meat with increasing ageing duration, concomitant with a slight increase in pH. Although the luminance of the meat is stabilized after 14-days, the red and yellow indices decrease until 35-days of ageing. Iron content also decreases with ageing duration. Finally, the kinetic evolution of muscle rheological properties indicates that the toughness decreases at least up to 35-days on raw meat. Cooking seems to homogenise the tenderness of the samples, no difference was noticed between the different ageing durations when meat was cooked. These first experimental data need to be confirmed with different animal types.

Carcass Characteristics and Beef Quality of Young Grass-Fed Angus x Salers Bovines

To characterize carcass and meat attributes, such as beef eating quality in specific farming conditions, 31 young grass-fed crossbred Angus x Salers cattle in two farming systems (a mono-cattle system versus a mixed system with beef cattle and sheep) were used in this study. Three muscle cuts (striploin—m. longissimus dorsi et thoracis; bolar blade—m. triceps brachii caput longum; internal flank plate—m. obliquus internus abdominis) were used for consumer eating quality testing and striploin was used for panelist eating quality assessment, and objective measurements [Warner–Bratzler shear force (WBSF) and fatty acid (FA) and antioxidant contents]. Results indicated that the farming system had no impact on carcass characteristics or meat quality, but it tended to affect FA content, which is likely explained by between-system differences in animal maturity (assessed by ossification score). Animal gender had significant effects on three eating quality traits evaluated by untrained consumers, with higher flavor liking, overall liking, and overall meat eating quality (MQ4) scores in females than in males. Additionally, FA contents were correlated with sensory quality traits to varying extents: consumer-scored tenderness, flavor, and overall liking were mainly positively correlated with ω-3 and ω-6 polyunsaturated fatty acid (PUFA) contents, and panelist-evaluated tenderness and abnormal flavor were more positively correlated with total lipids, saturated fatty acid (SFA), and monounsaturated fatty acid (MUFA) contents. Overall, this study showed that specific grass-fed crossbred Angus x Salers cattle can produce lean meat rich in ω-3 PUFAs with a low ω-6/ω-3 ratio and with “better than average” beef eating quality.

Shrinkage Properties and Their Relationship with Degradation of Proteins Linking the Endomysium and Myofibril in Lamb Meat Submitted to Heating or Air Drying

The shrinkage of the connective tissue and myofiber of lamb meat submitted to heat treatment or air drying at different storage stages (1, 5 and 7 days) was evaluated herein. The longitudinal and transverse shrinkage of heated lamb meat was significantly influenced by storage time and water bath heating temperature (50 °C, 70 °C and 90 °C) (p < 0.001). In contrast, the shrinkage of air-dried lamb meat was not influenced by storage time (p > 0.05). The microstructure of heated lamb meat, namely, the distance between muscle fascicles, the distance between myofibril networks, the area of myofibril networks, and the endomysium circumference, was significantly influenced by storage time (p < 0.05). During storage, the proportion of muscle fibers completely detached from endomysium increased, which could be due to the progressive degradation of proteins linking the endomysium and myofibril, including β-dystroglycan, α-dystroglycan, integrin-β1, and dystrophin. However, degradation of such proteins did not influence the shrinkage of lamb meat stored for five days or longer, since the decreased distance between myofibril networks indicated a higher shrinkage ratio of the endomysium compared to myofibers in samples air-dried at 35 °C or heated at 90 °C. The effect of these proteins on the shrinkage of heated lamb meat (raw meat stored for 1 day or less time) requires further elucidation.

Consumer Perception of Beef Quality and How to Control, Improve and Predict It? Focus on Eating Quality

Quality refers to the characteristics of products that meet the demands and expectations of the end users. Beef quality is a convergence between product characteristics on one hand and consumers’ experiences and demands on the other. This paper reviews the formation of consumer beef quality perception, the main factors determining beef sensory quality, and how to measure and predict beef eating quality at scientific and industrial levels. Beef quality is of paramount importance to consumers since consumer perception of quality determines the decision to purchase and repeat the purchase. Consumer perception of beef quality undergoes a multi-step process at the time of purchase and consumption in order to achieve an overall value assessment. Beef quality perception is determined by a set of quality attributes, including intrinsic (appearance, safety, technological, sensory and nutritional characteristics, convenience) and extrinsic (price, image, livestock farming systems, commercial strategy, etc.) quality traits. The beef eating qualities that are the most valued by consumers are highly variable and depend mainly on the composition and characteristics of the original muscle and the post-mortem processes involved in the conversion of muscle into meat, the mechanisms of which are summarized in this review. Furthermore, in order to guarantee good quality beef for consumers in advance, the prediction of beef quality by combining different traits in scenarios where the animal, carcass, and muscle cuts can be evaluated is also discussed in the current review.

Meat Quality Parameters, Sensory Properties and Consumer Acceptance of Chicken Meat from Dual-Purpose Crossbreeds Fed with Regional Faba Beans

Consumers’ concerns regarding the ethical and environmental practices of the current poultry production system have led to the search for an alternative production method. This study evaluated samples of three dual-purpose chicken crossbreeds: Vorwerkhuhn × Bresse Gauloise (VBG), Vorwerkhuhn × White Rock (VWR), and Bresse Gauloise × White Rock (BWR), fed with two variants of faba beans (vicin/convicin-rich and -poor: VC+ and VC−, respectively) and soybeans to examine whether the FB-based diets affected the meat quality of the crossbreeds. pH, color, water holding capacity, tenderness, nucleotide content and proximal composition were analyzed instrumentally, whereas sensory properties were identified by a trained panel and product acceptance was evaluated by frequent chicken consumers. Results showed that from instrumental measurements, the yellowness of the samples was affected by the type of feedstuff, whereas most other parameters were affected by the crossbreed, particularly color and nucleotide content. Sensory attributes, specifically, overall chicken aroma as well as firmness and crumbliness, were affected by an interaction of the feedstuff and crossbreed. Consumer preference did not show significant differences between samples. Overall, a faba-bean-based diet appeared to be a suitable alternative to a soybean-based diet on the crossbreeds VBG, VWR, and BWR when assessing the overall quality and taste of chicken breasts.

Handheld near-infrared spectrometer allows on-line prediction of beef quality traits

The aim of this study was to evaluate the ability of a miniaturized near-infrared spectrometer to predict chemical parameters, technological and quality traits, fatty acids and minerals in intact Longissimus thoracis and Trapezius obtained from the ribs of 40 Charolais cattle. Modified partial least squares regression analysis to correlate spectra information to reference values, and several scatter correction and mathematical treatments have been tested. Leave-one-out cross-validation results showed that the handheld instrument could be used to obtain a good prediction of moisture and an approximate quantitative prediction of fat or protein contents, a*, b*, shear force and purge loss with coefficients of determination above 0.66. Moreover, prediction models were satisfactory for proportions of MUFA, PUFA, oleic and palmitic acids, for Fe and Cu contents. Overall, results exhibited the usefulness of the on-line miniaturized tool to predict some beef quality traits and the possibility to use it with commercial cuts without sampling, carcass deterioration nor grinding and consequent meat products' loss.

Profile of Producers and Production of Dry-Aged Beef in Brazil

No information is currently available on the profile of producers and production process of dry-aged beef in Brazil, to the best of the authors’ knowledge. We surveyed 37 Brazilian companies that were producing dry-aged beef in 2020 to investigate this market. The absolute and relative frequency of responses was calculated to obtain the sum, average, minimum, and maximum values. From the respondents, dry-aged beef was first produced in 2009, and most producers are located in big cities. Most respondents control and monitor chamber temperature; however, humidity and air velocity only are monitored. The aging period (mostly between 22 to 60 days) was the main indicator of product readiness. The process losses (water loss and crust trimming) can reach 65%. Some producers perform microbiological analyses to ensure product safety and others use tools such as GMP and SOP. The results of this survey may help governmental institutions to develop a standardized industrial protocol for producing dry-aged beef in Brazil.

Review: Improving the nutritional, sensory and market value of meat products from sheep and cattle

This paper focuses on improving the sensory, health attributes and meat yield of beef and lamb meats. Value for meat is defined as the weight of meat × price/kg received with price linked to eating quality. To maximise value across the supply chain, accurate carcass grading systems for eating quality and yield are paramount. Grading data can then be used to target consumers' needs at given price points and then to tailor appropriate production and genetic directions. Both the grading methodologies and key phenotypes are complex and still under intensive research with international collaboration to maximise opportunities. In addition, there is value in promoting the health aspects of red meats served as whole trimmed meats. Typically, the total fat content is relatively low (less than 5%) and for forage systems, they deliver a very significant content of long-chain n-3 fatty acids. Further research is needed to clarify the healthiness or otherwise of ground beef served as burgers given the fat content is typically 20% or more. It is important to continue to improve the feedback to producers regarding the quantity and quality of the products they produce to target new value opportunities in a transparent and quantitative manner.

Sensory Consumer and Descriptive Analysis of Steaks from Beef Animals Selected from Tough and Tender Animal Genotypes: Genetic Meat Quality Traits Can Be Detected by Consumers

The objective of the present study was to determine if animals who were genetically divergent in the predicted tenderness of their meat actually produced more tender meat, as well as what the implications were for other organoleptic properties of the meat. The parental average genetic merit for meat tenderness was used to locate 20 “Tough genotype” heifers and 17 “Tender genotype” heifers; M. longissimus thoracis steaks from all heifers were subjected to sensory affective analysis (140 consumers) and sensory profiling using two trained sensory panels. All sample steaks were treated identically regarding pre- and post-mortem handling, storage, cooking and presentation (i.e., randomised, blind coded). For the affective consumer study, eight steaks were sectioned from the same location of the striploin muscles from each of the heifers. In total, 108 steaks from the Tender genotype and 118 from the Tough genotype were tested in the consumer study to determine the preference or liking of these steaks for appearance, aroma, flavour, tenderness, juiciness and overall acceptability. The consumer study found that the Tender genotype scored higher (p < 0.0001) for liking of tenderness, juiciness, flavour and overall acceptability compared to the Tough genotype. Similar results were generally found for the separate consumer age cohorts (18–64 years) with lower sensory acuity in the 65+ age cohort. For the descriptive analysis, the Tender genotype scored numerically more tender, juicy and flavoursome, although the differences were only significant for one of the panels. The critical outcome from this study is that parental average genetic merit can be used to pre-select groups of animals for tenderness, which, in turn, can be detected by consumers.

Improving the quality of sous-vide beef from Holstein-Friesian bulls by different marinades

The aim of the study was to determine effects of four commercial marinades on the colour, tenderness, cooking loss and sensory characteristics of semimembranosus beef muscles before and after sous-vide (SV) treatment. Muscles (n = 24) were marinated using Odessa (O; red pepper, garlic, onion), Mexico (M; red pepper, tomato), Old Polish (OP; pepper, garlic), and Bordeaux (B; pepper, red pepper, garlic) marinades for 24 h at 4 °C. Marinades uptake ranged from 3.3% (M) to 4.4% (B). Marinating and SV significantly affected all colour parameters. In SV beef, the highest values of L* were noted in OP and O samples, whereas the highest a* and b* values in M samples. Overall, marinating reduced (P < 0.05) cooking loss (34.6%) and shear force (19.5%). The use of marinating prior to SV treatment beneficially affected taste, tenderness and juiciness of beef. OP marinade allowed to obtain beef steaks with the best sensory quality and the lowest shear force.

The use of conventional laboratory-based methods to predict consumer acceptance of beef and sheep meat: A review

Meat scientists often use objective, laboratory-based methods to understand the sensorial properties of red meat. These approaches are advantageous because of their reproducibility, low cost, rapid generation of data and technical ease - comparative to large scale consumer sensory panels. To enhance the value of these methods, effort has been applied to identify specific limits or thresholds that correspond to a consumer's acceptance or satisfaction with the quality of a meat product. From the literature, we observe there to be inconsistencies in these thresholds. This could stem from disparate laboratory methods, consumer panel procedures and demographics, the approach to statistical analysis, sample type and representativeness, and more. This paper aimed to review consumer thresholds, proposed in the literature, to provide insight into their validity and transferability to other studies. Investigations were limited to red meat (beef and sheep meat) and to non-spectroscopic methods that have been used to predict consumer acceptance of colour, tenderness, juiciness, flavour and overall liking.

Effect of Feeding Barley, Corn, and a Barley/Corn Blend on Beef Composition and End-Product Palatability

This study evaluated the relationship among palatability attributes, volatile compounds, and fatty acid (FA) profiles in meat from barley, corn, and blended (50:50, barley and corn) grain-fed steers. Multiple correspondence analysis with three dimensions (Dim) explained 62.2% of the total variability among samples. The Dim 1 and 2 (53.3%) separated pure from blended grain-fed beef samples. Blended grain beef was linked to a number of volatiles including (E,E)-2,4-decadienal, hexanal, 1-octen-3-ol, and 2,3-octanedione. In addition, blended grain-fed beef was linked to fat-like and rancid flavors, stale-cardboard, metallic, cruciferous, and fat-like aroma descriptors, and negative categories for flavor intensity (FI), off-flavor, and tenderness. A possible combination of linoleic and linolenic acids in the blended diet, lower rumen pH, and incomplete biohydrogenation of blended grain-fed polyunsaturates could have increased (p ≤ 0.05) long-chain n-6 fatty acids (LCFA) in blended grain-fed beef, leading to more accumulation of FA oxidation products in the blended than in barley and corn grain-fed meat samples. The Dim 3 (8.9%) allowed corn separation from barley grain beef. Barley grain-fed beef was mainly linked to alkanes and beef positive FI, whereas corn grain-fed beef was associated with pyrazines, in addition to aldehydes related to n-6 LCFA oxidation.

Identification of Meat Quality Determining Marker Genes in Fibroblasts of Bovine Muscle Using Transcriptomic Profiling

In the present study, we comparatively analyzed the transcriptomic profiling of fibroblasts derived from two different muscles, biceps femoris and longissimus dorsi with significant difference in the meat quality and tenderness. EBSeq algorithm was applied to analyze the data, and genes were considered to be significantly differentially expressed if the false discovery rate value was <0.05, the P value was <0.01, and the fold change was >0.585. The results revealed that 253 genes were differentially expressed genes (DEGs) (170 genes were upregulated, and 83 were downregulated) and more than 100 DEGs were probably associated with intramuscular fat deposition, tenderness, and toughness, which are driving the meat quality and were involved in biological processes such as collagen synthesis, cell differentiation, and muscle tissue and fiber development; molecular functions such as chemokine activity and collagen activity; cellular components such as cytoplasm and myofibril; and pathways such as collagen signaling and metabolic pathways. A gene-act network and a co-expression network revealed the close relationship between intramuscular fat deposition and meat tenderness. The expressions of 20 DEGs were validated by real-time PCR, and the results suggested that the DEGs are correlated with RNA-seq data and play crucial roles in muscle growth, development processes, toughness, and tenderness of the meat. Together, the genome-wide transcriptome analysis revealed that various genes are responsible for toughness and tenderness variance in the difference muscles of beef.

Analysis of volatile compounds and flavor fingerprint in Jingyuan lamb of different ages using gas chromatography-ion mobility spectrometry (GC-IMS)

In this study, gas chromatography coupled to an ion mobility spectrometry (GC-IMS) was used for analyzing some volatile components and flavor fingerprint in samples from Jingyuan lambs of different ages (2, 6, and 12 months). The data obtained from ion mobility were processed using laboratory analysis view processing software for fingerprint recognition, and the principal component analysis (PCA) was performed. GC-IMS provided information on the characteristics and strength of 66 volatile flavor compounds (monomers and dimers). The differences in flavoring substances between lambs of different ages were observed. The compounds with higher intensity peaks in the lamb meat samples were alcohols (1-octen-3-ol, ethanol, (E)-2-hexen-1-ol, 1-pentanol, and 2-propanol), ketones (2-pentanone, 2-heptanone, 3-hydroxy-2-butanone, 2-hexanone, 2-butanone, 2-propanone, and 4-methyl-2-pentanone), aldehydes (n-nonanal, octanal, heptanal, 3-methylbutanal, hexanal, pentanal, 2-methylbutanal, (E)-2-octenal, (E)-2-nonenal, methional, and phenylacetaldehyde), esters (methyl benzoate), furan (2-pentylfuran), and thiazole (trimethylthiazole). The results showed that the flavor fingerprint in samples from Jingyuan lambs of different ages (2, 6, and 12 months) can be established by GC-IMS and PCA based on the identified volatile compounds. This method might be used for the rapid and comprehensive analysis of volatile components in lamb meat.