Influence of membrane surface properties on the growth of neuronal cells isolated from hippocampus

Anticancer Effects of Plasma-Treated Water Solutions from Clinically Approved Infusion Liquids Supplemented with Organic Molecules

Water solutions treated by cold atmospheric plasmas (CAPs) currently stand out in the field of cancer treatment as sources of exogenous blends of reactive oxygen and nitrogen species (RONS). It is well known that the balance of RONS inside both eukaryotic and prokaryotic cells is directly involved in physiological as well as pathological pathways. Also, organic molecules including phenols could exert promising anticancer effects, mostly attributed to their pro-oxidant ability in vitro and in vivo to generate RONS like O2-, H2O2, and a mixture of potentially cytotoxic compounds. By our vision of combining the efficacy of plasma-produced RONS and the use of organic molecules, we could synergistically attack cancer cells; yet, so far, this combination, to the best of our knowledge, has been completely unexplored. In this study, l-tyrosine, an amino acid with a phenolic side chain, is added to a physiological solution, often used in clinical practice (SIII) to be exposed to plasma. The efficacy of the gas plasma-oxidized SIII solution, containing tyrosine, was evaluated on four cancer cell lines selected from among tumors with poor prognosis (SHSY-5Y, MCF-7, HT-29, and SW-480). The aim was to induce tumor toxicity and trigger apoptosis pathways. The results clearly indicate that the plasma-treated water solution (PTWS) reduced cell viability and oxygen uptake due to an increase in intracellular ROS levels and activation of apoptosis pathways in all investigated cancer cells, which may be related to the activation of the mitochondrial-mediated and p-JNK/caspase-3 signaling pathways. This research offers improved knowledge about the physiological mechanisms underlying cancer treatment and a valid method to set up a prompt, adequate, and effective cancer treatment in the clinic.

Surface engineering and the application of laser-based processes to stents - A review of the latest development

Late in-stent thrombus and restenosis still represent two major challenges in stents’ design. Surface treatment of stent is attracting attention due to the increasing importance of stenting intervention for coronary artery diseases. Several surface engineering techniques have been utilised to improve the biological response in vivo on a wide range of biomedical devices. As a tailorable, precise, and ultra-fast process, laser surface engineering offers the potential to treat stent materials and fabricate various 3D textures, including grooves, pillars, nanowires, porous and freeform structures, while also modifying surface chemistry through nitridation, oxidation and coatings. Laser-based processes can reduce the biodegradable materials' degradation rate, offering many advantages to improve stents’ performance, such as increased endothelialisation rate, prohibition of SMC proliferation, reduced platelet adhesion and controlled corrosion and degradation. Nowadays, adequate research has been conducted on laser surface texturing and surface chemistry modification. Laser texturing on commercial stents has been also investigated and a promotion of performance of laser-textured stents has been proved.

In this critical review, the influence of surface texture and surface chemistry on stents performance is firstly reviewed to understand the surface characteristics of stents required to facilitate cellular response. This is followed by the explicit illustration of laser surface engineering of stents and/or related materials. Laser induced periodic surface structure (LIPSS) on stent materials is then explored, and finally the application of laser surface modification techniques on latest generation of stent devices is highlighted to provide future trends and research direction on laser surface engineering of stents.

•

Compared conventional surface engineering with laser-based methods for biomedical devices.

•

Explained the influence of texture geometry and surface chemistry on stents biological response.

•

Reviewed state of the art in laser surface engineering of stents for improved biological response.

•

Reviewed state of the art in laser surface engineering to control degradation of bioresorbable stents.

•

Highlighted novel laser surface engineering designs for improved stents'performance.

What affects the biocompatibility of polymers?

In recent decades synthetic polymers have gained increasing popularity, and nowadays they are an integral part of people's daily lives. In addition, owing to their competitive advantage and being susceptible to modification, polymers have stimulated the fast development of innovative technologies in many areas of science. Biopolymers are of particular interest in various branches of medicine, such as implantology of bones, cartilage and skin tissues as well as blood vessels. Biomaterials with such specific applications must have appropriate mechanical and strength characteristics and above all they must be compatible with the surrounding tissues, human blood and its components, i.e. exhibit high hemo- and biocompatibility, low or no thrombo- and carcinogenicity, foreign body response (host response), appropriate osteoconduction, osteoinduction and mineralization. For biocompatibility improvement many surface treatment techniques have been utilized leading to fabricate the polymer biomaterials of required properties, also at nanoscale. This review paper discusses the most important physicochemical and biological factors that affect the biocompatibility, thus the reaction of the living organism after insertion of the polymer-based biomaterials, i.e. surface modification and/or degradation, surface composition (functional groups and charge), size and shapes, hydrophilic-hydrophobic character, wettability and surface free energy, topography (roughness, stiffness), crystalline and amorphous structure, nanostructure, cell adhesion and proliferation, cellular uptake. Particularly, the application of polysaccharides (chitosan, cellulose, starch) in the tissue engineering is emphasized.

Biomimicry in 3D printing design: implications for peripheral nerve regeneration

Nerve guide conduits (NGCs) connect dissected nerve stumps and effectively repair short-range peripheral nerve defects. However, for long-range defects, autografts show better therapeutic effects, despite intrinsic limitations. Recent evidence shows that biomimetic design is essential for high-performance NGCs, and 3D printing is a promising fabricating technique. The current work includes a brief review of the challenges for peripheral nerve regeneration. The authors propose a potential solution using biomimetic 3D-printed NGCs as alternative therapies. The assessment of biomimetic designs includes microarchitecture, mechanical property, electrical conductivity and biologics inclusion. The applications of 3D printing in preparing NGCs and present strategies to improve therapeutic effects are also discussed.

Hollow Fiber and Nanofiber Membranes in Bioartificial Liver and Neuronal Tissue Engineering

To date, the creation of biomimetic devices for the regeneration and repair of injured or diseased tissues and organs remains a crucial challenge in tissue engineering. Membrane technology offers advanced approaches to realize multifunctional tools with permissive environments well-controlled at molecular level for the development of functional tissues and organs. Membranes in fiber configuration with precisely controlled, tunable topography, and physical, biochemical, and mechanical cues, can direct and control the function of different kinds of cells toward the recovery from disorders and injuries. At the same time, fiber tools also provide the potential to model diseases in vitro for investigating specific biological phenomena as well as for drug testing. The purpose of this review is to present an overview of the literature concerning the development of hollow fibers and electrospun fiber membranes used in bioartificial organs, tissue engineered constructs, and in vitro bioreactors. With the aim to highlight the main biomedical applications of fiber-based systems, the first part reviews the fibers for bioartificial liver and liver tissue engineering with special attention to their multifunctional role in the long-term maintenance of specific liver functions and in driving hepatocyte differentiation. The second part reports the fiber-based systems used for neuronal tissue applications including advanced approaches for the creation of novel nerve conduits and in vitro models of brain tissue. Besides presenting recent advances and achievements, this work also delineates existing limitations and highlights emerging possibilities and future prospects in this field.

Biomimetic Design for Bio-Matrix Interfaces and Regenerative Organs

The urgent demand for transplanted organs has motivated the development of regenerative medicine to biomimetically reconstruct the structure and function of natural tissues or organs. The prerequisites for constructing multicellular organs include specific cell sources, suitable scaffolding material, and interconnective biofunctional interfaces. As some of the most complex systems in nature, human organs, tissues, and cellular units have unique "bio-matrix" physicochemical interfaces. Human tissues support a large number of cells with distinct biofunctional interfaces for compartmentalization related to metabolism, material exchange, and physical barriers. These naturally shaped biofunctional interfaces support critical metabolic functions that drive adaptive human behavior. In contrast, mutations and disorders during organogenesis can disrupt these interfaces as a consequence of disease and trauma. To replicate the appropriate structure and physiological function of tissues and organs, the biomaterials used in these approaches should have properties that mimic those of natural biofunctional interfaces. In this review, the focus is on the biomimetic design of functional interfaces and hierarchical structures for four regenerative organs, liver, kidney, lung, heart, and the immune system. Research on these organs provides understanding of cell-matrix interactions for hierarchically bioinspired material engineering, and guidance for the design of bioartificial organs. Finally, we provide perspectives on future challenges in biofunctional interface designs and discuss the obstacles that remain toward the generation of functional bioartificial organs.

Capturing instructive cues of tissue microenvironment by silica bioreplication

Cells in tissues are enveloped by an instructive niche made of the extracellular matrix. These instructive niches contain three general types of information: topographical, biochemical and mechanical. While the combined effects of these three factors are widely studied, the functions of each individual one has not been systematically characterised, because it is impossible to alter a single factor in a tissue microenvironment without simultaneously affecting the other two. Silica BioReplication (SBR) is a process that converts biological samples into silica, faithfully preserving the original topography at the nano-scale. We explored the use of this technique to generate inorganic replicas of intact mammalian tissues, including tendon, cartilage, skeletal muscle and spinal cord. Scanning electron and atomic force microscopy showed that the resulting replicas accurately preserved the three-dimensional ultrastructure of each tissue, while all biochemical components were eradicated by calcination. Such properties allowed the uncoupling the topographical information of a tissue microenvironment from its biochemical and mechanical components. Here, we showed that human mesenchymal stem cells (MSC) cultured on the replicas of different tissues displayed vastly different morphology and focal adhesions, suggesting that the topography of the tissue microenvironment captured by SBR could profoundly affect MSC biology. MSC cultured on tendon replica elongated and expressed tenocytes marker, while MSC on the spinal cord replica developed into spheroids that resembled neurospheres, in morphology and in the expression of neurosphere markers, and could be further differentiated into neuron-like cells. This study reveals the significance of topographical cues in a cell niche, as tissue-specific topography was sufficient in initiating and directing differentiation of MSC, despite the absence of any biochemical signals. SBR is a convenient and versatile method for capturing this topographical information, facilitating the functional characterisation of cell niches. STATEMENT OF SIGNIFICANCE: Various studies have shown that three major factors, topographical, biochemical and mechanical, in a tissue microenvironment (TME) are essential for cellular homeostasis and functions. Current experimental models are too simplistic to represent the complexity of the TME, hindering the detailed understanding of its functions. In particular, the importance each factor in a tissue microenvironment have not been individually characterised, because it is challenging to alter one of these factors without simultaneously affecting the other two. Silica bioreplication (SBR) is a process that converts biological samples into silica replicas with high structural fidelity. SBR is a convenient and versatile method for capturing this topographical information on to a biologically inert material, allowing the functional characterisation of the architecture of a TME.

3D Printed Neural Regeneration Devices

Neural regeneration devices interface with the nervous system and can provide flexibility in material choice, implantation without the need for additional surgeries, and the ability to serve as guides augmented with physical, biological (e.g., cellular), and biochemical functionalities. Given the complexity and challenges associated with neural regeneration, a 3D printing approach to the design and manufacturing of neural devices could provide next-generation opportunities for advanced neural regeneration via the production of anatomically accurate geometries, spatial distributions of cellular components, and incorporation of therapeutic biomolecules. A 3D printing-based approach offers compatibility with 3D scanning, computer modeling, choice of input material, and increasing control over hierarchical integration. Therefore, a 3D printed implantable platform could ultimately be used to prepare novel biomimetic scaffolds and model complex tissue architectures for clinical implants in order to treat neurological diseases and injuries. Further, the flexibility and specificity offered by 3D printed in vitro platforms have the potential to be a significant foundational breakthrough with broad research implications in cell signaling and drug screening for personalized healthcare. This progress report examines recent advances in 3D printing strategies for neural regeneration as well as insight into how these approaches can be improved in future studies.

Micropatterning Method for Porous Materials Using the Difference of the Glass Transition Temperature between Exposed and Unexposed Areas of a Thick-Photoresist

A cell culture on a scaffold has the advantages of functionality and easy handling, because the geometry of the cellular tissue is controlled by designing the scaffold. To create complex cellular tissue, scaffolds should be complex two-dimensional (2D) and three-dimensional (3D) structures. However, it is difficult to fabricate a scaffold with a 2D and 3D structure because the shape, size, and fabrication processes of a 2D structure in creating a cell layer, and a 3D structure containing cells, are different. In this research, we propose a micropatterning method for porous materials using the difference of the glass transition temperature between exposed and unexposed areas of a thick-photoresist. Since the proposed method does not require a vacuum, high temperature, or high voltage, it can be used for fabricating various structures with a wide range of scales, regardless of the materials used. Additionally, the patterning area can be fabricated accurately by photolithography. To evaluate the proposed method, a membrane integrated scaffold (MIS) with a 2D porous membrane and 3D porous material was fabricated. The MIS had a porous membrane with a pore size of 4 μm or less, which was impermeable to cells, and a porous material which was capable of containing cells. By seeding HUVECs and HeLa cells on each side of the MIS, the cellular tissue was formed with the designed geometry.

Intrinsic Cellular Responses of Human Wharton's Jelly Mesenchymal Stem Cells Influenced by O2-Plasma-Modified and Unmodified Surface of Alkaline-Hydrolyzed 2D and 3D PCL Scaffolds

Polycaprolactone (PCL), a hydrophobic-degradable polyester, has been widely investigated and extensively developed, to increase the biocompatibility for tissue engineering. This research was the first trial to evaluate the intrinsic biological responses of human Wharton's Jelly Mesenchymal Stem Cells (hWJMSCs) cultured on alkaline hydrolysis and low-pressure oxygen plasma modified 2D and 3D PCL scaffolds, without adding any differentiation inducers; this has not been reported before. Four types of the substrate were newly established: 2D plasma-treated PCL (2D-TP), 2D non-plasma-treated PCL (2D-NP), 3D plasma-treated PCL (3D-TP), and 3D non-plasma-treated PCL (3D-NP). Physicochemical characterization revealed that only plasma-treated PCL scaffolds significantly increased the hydrophilicity and % oxygen/carbon ratio on the surfaces. The RMS roughness of 3D was higher than 2D conformation, whilst the plasma-treated surfaces were rougher than the non-plasma treated ones. The cytocompatibility test demonstrated that the 2D PCLs enhanced the initial cell attachment in comparison to the 3Ds, indicated by a higher expression of focal adhesion kinase. Meanwhile, the 3Ds promoted cell proliferation and migration as evidence of higher cyclin-A expression and filopodial protrusion, respectively. The 3Ds potentially protected the cell from apoptosis/necrosis but also altered the pluripotency/differentiation-related gene expression. In summary, the different configuration and surface properties of PCL scaffolds displayed the significant potential and effectiveness for facilitating stem cell growth and differentiation in vitro. The cell-substrate interactions on modified surface PCL may provide some information which could be further applied in substrate architecture for stem cell accommodation in cell delivery system for tissue repair.

Mammalian Cell Behavior on Hydrophobic Substrates: Influence of Surface Properties

The influence of different surface properties holding to a modification of the substrate towards hydrophobic or superhydrophobic behavior was reviewed in this paper. Cell adhesion, their communication, and proliferation can be strongly manipulated, acting on interfacial relationship involving stiffness, surface charge, surface chemistry, roughness, or wettability. All these features can play mutual roles in determining the final properties of biomedical applications ranging from fabrics to cell biology devices. The focus of this work is the mammalian cell viability in contact with moderate to highly water repellent coatings or materials and also in combination with hydrophilic areas for more specific application. Few case studies illustrate a range of examples in which these surface properties and design can be fruitfully matched to the specific aim.

Modulation of scar tissue formation in injured nervous tissue cultivated on surface-engineered coralline scaffolds

Following traumatic brain injury, there is no restoration of the lost nervous tissue, mainly due to the formation of a scar. One promising strategy to overcome this hurdle is grafting scaffolds that can disturb the scar blockade, enabling cell invasion into the wound. The aragonite skeleton of corals is useful scaffolds for testing this strategy, being supportive for neural cells in culture. The purpose of this work was to check if a contact between a coralline scaffold and an injured nervous tissue affects scar formation and if this effect can be regulated by engineering the scaffold's surface topology. To address that, hippocampal slices were cultivated on a coral skeleton having two distinct surface shapes: (1) intact skeleton pieces (ISP): porous, microrough surface; (2) grained skeleton (GS): nonporous, macrorough surface. On ISP, slices deformed by engulfing the scaffold's outer surface without penetrating the pores, yet, they preserved their coherence. By contrast, on GS slices were flat, but broken into interconnected small segments of tissue. In addition, whereas on ISP astrocytes were significantly more active and diffusely distributed, on GS reactive astrocytes tightened into a single <90 μm wide scar-like stripe at the slice's periphery. Hence, by grafting coralline scaffolds of predesigned surface roughness and porosity into brain wounds, control over scar tissue formation can be gained, providing an opportunity for cell migration and damage repair. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2295-2306, 2018.

Pancreatic differentiation of induced pluripotent stem cells in activin A-grafted gelatin-poly(lactide-co-glycolide) nanoparticle scaffolds with induction of LY294002 and retinoic acid

The differentiation of induced pluripotent stem cells (iPSCs) in biomaterial scaffolds is an emerging area for biomedical applications. This study proposes, for the first time, the production of pancreatic cells from iPSCs in gelatin-poly(lactide-co-glycolide) nanoparticle (PLGA NP) scaffolds. The porosity and swelling ratio of the scaffolds decreased with increases in gelatin and PLGA NP concentrations. The adhesion efficiency of iPSCs in gelatin-PLGA NP scaffolds was found to be higher at 6.7% (w/w) PLGA NP. A 3-step induction of iPSCs was used to differentiate into pancreatic islet cells using activin A, 2-(4-morpholinyl)-8-phenyl-4H-1-benzopyran-4-one (LY294002), and retinoic acid (RA). The ability of iPSCs to differentiate into pancreatic islet cells in a scaffold was demonstrated by immunofluorescence staining and flow-cytometry analysis. The results indicate that the concentration of activin A, LY294002, and RA plays a decisive role in the differentiation of iPSCs into pancreatic cells. Activin A and LY294002 induce the iPSCs into endoderm and RA induces endoderm into islet cells. A maximum insulin secretion by glucose stimulation was obtained with a higher concentration (2μM) of RA. The use of activin A-grafted gelatin-PLGA NP scaffolds induced by LY294002 and RA can be a promising approach to developing pancreatic islet cells from iPSCs.

Neuroregeneration of Induced Pluripotent Stem Cells in Polyacrylamide-Chitosan Inverted Colloidal Crystal Scaffolds with Poly(lactide-co-glycolide) Nanoparticles and Transactivator of Transcription von Hippel-Lindau Peptide

Polyacrylamide (PAAM) and chitosan were fabricated by inverted colloidal crystal (ICC) method for scaffolds comprising regular pores. The hybrid PAAM-chitosan ICC scaffolds were grafted with poly(lactide-co-glycolide) (PLGA) nanoparticles (NPs) for a rougher pore surface and grafted with transactivator of transcription von Hippel-Lindau (TATVHL) peptide for a better differentiation of induced pluripotent stem (iPS) cells toward neural lineage. By scanning electron microscopy, we found that iPS cells cultured in PAAM-chitosan ICC scaffolds with PLGA NPs at 1.0 mg/mL and TATVHL peptide at 15 μg/mL elongated the axonal length to 15 μm. A combination of PLGA NPs and TATVHL peptide favored the adhesion of iPS cells, reduced the embryonic phenotype after cultivation, and guided the production of βIII tubulin-positive cells in PAAM-chitosan ICC scaffolds. In addition to the differentiation toward neurite-like cells, an increase in the content of TATVHL peptide in PAAM-chitosan ICC scaffolds inhibited the differentiation of iPS cells toward astrocytes. ICC scaffolds composed of PAAM, chitosan, PLGA NPs, and TATVHL peptide can be an efficacious matrix to differentiate iPS cells toward neurons and retard the glial formation for nerve regeneration.

Chitosan-poly(vinyl alcohol) nanofibers by free surface electrospinning for tissue engineering applications

Deformities in tissues and organs can be treated by using tissue engineering approach offering the development of biologically functionalized scaffolds from a variety of polymer blends which mimic the extracellular matrix and allow adjusting the material properties to meet the defect architecture. In recent years, research interest has been shown towards the development of chitosan (CS) based biomaterials for tissue engineering applications, because of its minimal foreign body reactions, intrinsic antibacterial property, biocompatibility, biodegradability and ability to be molded into various geometries and forms thereby making it suitable for cell ingrowth and conduction. The present work involves the fabrication of nanofibrous scaffold from CS and poly(vinyl alcohol) blends by free-surface electrospinning method. The morphology and functional characteristics of the developed scaffolds were assessed by field emission scanning electron microscopy and fourier transformed infra-red spectra analysis. The morphological analysis showed the average fiber diameter was 269 nm and thickness of the mat was 200-300 µm. X-ray diffraction study confirmed the crystalline nature of the prepared scaffolds, whereas hydrophilic characteristic of the prepared scaffolds was confirmed by measured contact angle. The scaffolds possess an adequate biodegradable, swelling and mechanical property that is found desirable for tissue engineering applications. The cell study using umbilical cord blood-derived mesenchymal stem cells has confirmed the in vitro biocompatibility and cell supportive property of the scaffold thereby depicting their potentiality for future clinical applications.

Adhesion modification of neural stem cells induced by nanoscale ripple patterns

We have studied the influence of anisotropic nanopatterns (ripples) on the adhesion and morphology of mouse neural stem cells (C17.2) on glass substrates using cell viability assay, optical microscopy and atomic force microscopy. The ripples were produced by defocused ion beam sputtering with inert Ar ions, which physically remove atoms from the surface at the energy of 800 eV. The ripple periodicity (∼200 nm) is comparable to the thickness of the cytoplasmatic microspikes (filopodia) which link the stem cells to the substrate. All methods show that the cell adhesion is significantly lowered compared to the same type of cells on flat glass surfaces. Furthermore, the AFM analysis reveals that the filopodia tend to be trapped parallel or perpendicular to the ripples, which limits the spreading of the stem cell on the rippled substrate. This opens the perspective of controlling the micro-adhesion of stem cells and the orientation of their filopodia by tuning the anisotropic substrate morphology without chemical reactions occurring at the surface.

Neuroprotective effect of human mesenchymal stem cells in a compartmentalized neuronal membrane system

In this work, we describe the development of a compartmentalized membrane system using neonatal rodent hippocampal cells and human mesenchymal stem cells (hMSCs) to investigate the neuroprotective effects of hMSCs. To elucidate this interaction an in vitro oxygen-glucose deprivation (OGD) model was used that mimics central nervous system insults in vivo. Cells were cultured in a membrane system with a sandwich configuration in which the hippocampal cells were seeded on a fluorocarbon (FC) membrane, and were separated by hMSCs through a semipermeable polyethersulfone (PES) membrane that ensures the transport of molecules and paracrine factors, but prevents cell-to-cell contact. This system was used to simulate a cerebral ischemic damage by inducing OGD for 120min. The core contribution of the work highlights the neuroprotective effects of hMSCs on hippocampal cells in a membrane system for the first time. The novel results show that hMSC secretome factors protect hippocampal cells against OGD insults as indicated by the conservation of specific structural and functional cell features together with the development of a highly branched neural network after the damage. Moreover, neuronal cells co-cultured with hMSCs before OGD insult were able to maintain BDNF production and O2 consumption and did not express the apoptotic markers that were expressed in similarly insulted neuronal cells that had not been co-cultured with hMSCs. This compartmentalized membrane system appears to be a very useful and reliable system for studying the neuroprotective effects of hMSCs and identifying secreted factors that may be involved.

STATEMENT OF SIGNIFICANCE

This paper is based on a combined synergism of biomaterials technology and stem cell approach, focusing on the development of a compartmentalized membrane system that serves as an innovative tool for highlighting the role of hMSCs on hippocampal neurons upon damage. The membrane system consists of two different flat sheet membranes, giving rise to double and separated cell membrane compartments that prevent cell-to-cell contact but allow the transport of paracrine factors. This system strongly corroborates the paracrine mediated neuroprotection of hMSCs on ischemic damaged neurons. The challenging and pioneeristic approach by using biomaterials allowed to perform a stepwise analysis of the phenomena, providing new insights into the field of MSC therapy.

Zn(ii) and Cu(ii) complexes containing bioactive O,O-chelated ligands: homoleptic and heteroleptic metal-based biomolecules

Zn(ii) or Cu(ii) highly stable complexes with chelated O,O-donor ligands from natural extractions give rise to drug delivery systems, new biologically active complexes and potential diagnostic agents due to their intrinsic spectroscopic properties.

Peptide-modified conducting polymer as a biofunctional surface: monitoring of cell adhesion and proliferation

A designed bio-functional surface is a promising candidate forcell-culture-on-a-chipapplications.

Probing cellular behaviors through nanopatterned chitosan membranes

This paper describes a high-throughput method for developing physically modified chitosan membranes to probe the cellular behavior of MDCK epithelial cells and HIG-82 fibroblasts adhered onto these modified membranes. To prepare chitosan membranes with micro/nanoscaled features, we have demonstrated an easy-to-handle, facile approach that could be easily integrated with IC-based manufacturing processes with mass production potential. These physically modified chitosan membranes were observed by scanning electron microscopy to gain a better understanding of chitosan membrane surface morphology. After MDCK cells and HIG-82 fibroblasts were cultured on these modified chitosan membranes for various culture durations (i.e. 1, 2, 4, 12 and 24 h), they were investigated to decipher cellular behavior. We found that both cells preferred to adhere onto a flat surface rather than on a nanopatterned surface. However, most (> 80%) of the MDCK cells showed rounded morphology and would suspend in the cultured medium instead of adhering onto the planar surface of negatively nanopatterned chitosan membranes. This means different cell types (e.g. fibroblasts versus epithelia) showed distinct capabilities/preferences of adherence for materials of varying surface roughness. We also showed that chitosan membranes could be re-used at least nine times without significant contamination and would provide us consistency for probing cell-material interactions by permitting reuse of the same substrate. We believe these results would provide us better insight into cellular behavior, specifically, microscopic properties and characteristics of cells grown under unique, nanopatterned cell-interface conditions.

Improving the bioactivity of Zn(II)-curcumin based complexes

New Zn(II)-curcumin based heteroleptic complexes (1-5) have been synthesized and fully characterized, with the aim to improve the bioactivity of the precursor derivative [(bpy-9)Zn(curc)Cl] (A), a potentially intercalating antitumor agent recently reported. Some structural changes have been made starting from the reference complex A, in order to introduce new functionalities, such as electrostatic and/or covalent interactions. In particular, keeping the same N,N chelating ligand, namely bpy-9, two completely different Zn(II) species have been obtained: a tetracoordinated Zn(II) cation with tetrafluoroborate as counterion (1) and a dimeric neutral complex in which the sulfate anion acts as a bridging group through two Zn(II) centres (2). Moreover, by changing the N,N chelating unit, [(L(n))Zn(curc)Cl] complexes (3-5), in which the Zn(II) ion shows the same pentacoordination seen in the precursor complex A, have been obtained. The antitumour activity of all new Zn(II) complexes was tested in vitro against the human neuroblastoma cell line SH-SY5Y in a biohybrid membrane system and the results indicate that all species exhibit strong cytotoxic activity. In particular the ionic tetrafluoroborate Zn(II) complex, 1, and the neutral phenanthroline based Zn(II) derivative, 4, show the strongest growth inhibition, being even more effective than the model complex A. Both complexes have a dose-dependent anti-proliferative effect on cells as demonstrated by the decrease of viability and the increase of Annexin V and PI-positive cells with the increase of their concentration. Cells treated with complexes 1 and 4 undergo apoptosis that involves the activation of JNK, caspase 3 and MMP changes. Finally, complex 1 is more effective in the induction of caspase-3 activation demonstrating its ability to trigger the execution-phase of cell apoptosis.

PAN hollow fiber membranes elicit functional hippocampal neuronal network

This study focuses on the development of an advanced in vitro biohybrid culture model system based on the use of hollow fibre membranes (HFMs) and hippocampal neurons in order to promote the formation of a high density neuronal network. Polyacrylonitrile (PAN) and modified polyetheretherketone (PEEK-WC) membranes were prepared in hollow fibre configuration. The morphological and metabolic behaviour of hippocampal neurons cultured on PAN HF membranes were compared with those cultured on PEEK-WC HF. The differences of cell behaviour between HFMs were evidenced by the morphometric analysis in terms of axon length and also by the investigation of metabolic activity in terms of neurotrophin secretion. These findings suggested that PAN HFMs induced the in vitro reconstruction of very highly functional and complex neuronal networks. Thus, these biomaterials could potentially be used for the in vitro realization of a functional hippocampal tissue analogue for the study of neurobiological functions and/or neurodegenerative diseases.

Distinct α GABA(A)R subunits influence structural and transcriptional properties of CA1 hippocampal neurons

The hippocampus is recognized as a major telencephalic area modulating learning and episodic memory through the activation of its different subregions. The various functional properties of Ammon's horn 1 (Cornu Amonis 1; CA1) area have been shown to rely on GABAergic and Glutamat- (Glu)-ergic neuronal signals during both postnatal and adult stages. For this purpose, it was the aim of the present study to establish whether certain alpha GABA(A)R subunits (alpha(2,5)) were capable of modifying CA1 structural and functional features via their interaction with specific NMDA receptor subunits such as NR1 during early development stages of the hibernating hamster (Mesocricetus auratus). Indeed, in vitro addition of the selective alpha(2,5) GABA(A)R agonist diazepam (DZP; alpha(2,5)) accounted for early neuronal formations that were blocked by its antagonist flumazenil (FLM). In particular, the former drug caused very great (p<0.001) increases of dendritic sprouting and branching processes mainly at day in vitro (DIV) 3, while its effects still continued to be responsible for moderate (p<0.05) increases of axonal length during the entire culture period. Contextually, DZP was also responsible for a very great up-regulated expression of neuritic NR1 and MAP2 together with a great (p<0.01) increase of synaptophysin at DIV7. Overall, this first study suggests a specifically tight cross-talking relationship of GABAergic/Gluergic mechanisms operating during CA1 neuronal development, which may bring us closer to the identification of more selective therapeutic targets for hippocampal-linked neurological disorders.

Distinct alpha subunits of the GABAA receptor are responsible for early hippocampal silent neuron-related activities

The modulatory actions of GABA(A) receptor subunits are crucial for morphological and transcriptional neuronal activities. In this study, growth of hamster hippocampal neurons on biohybrid membrane substrates allowed us to show for the first time that the two major GABA(A) alpha receptor subunits (alpha(2,5)) are capable of early neuronal shaping plus expression differences of some of the main neuronal cytoskeletal factors (GAP-43, the neurotrophin--BDNF) and of Gluergic subtypes. In a first case the inverse alpha(5) agonist (RY-080) seemed to account for the reduction of dendritic length at DIV7, very likely via lower BDNF levels. Conversely, the effects of the preferentially specific agonist for hippocampal alpha(2) subunit (flunitrazepam) were, instead, directed at the formation of growth cones at DIV3 in the presence of greatly (P < 0.01) diminished GAP-43 levels as displayed by strongly reduced axonal sprouting. It is interesting to note that concomitantly to these morphological variations, the transcription of some Gluergic receptor subtypes resulted to be altered. In particular, flunitrazepam was responsible for a distinctly rising expression of axonal NR1 mRNA levels from DIV3 (P < 0.01) until DIV7 (P < 0.001), whereas RY-080 evoked a very great (P < 0.001) downregulation of dendritic GluR2 at only DIV7. Together, our results demonstrate that GABA(A) alpha(2,5) receptor-containing subunits by regulating the precise synchronization of cytoskeletal factors are considered key modulating neuronal elements of hippocampal morphological growth features. Moreover, the notable NR1 and GluR2 transcription differences promoted by these GABA(A) alpha subunits tend to favorably corroborate the early role of alpha(2) + alpha(5) on hippocampal neuronal networks in hibernating rodents through the recruitment and activation of silent neurons, and this may provide useful insights regarding molecular neurodegenerative events.