The hydrodynamic permeability and surface property of polyethersulfone ultrafiltration membranes with mussel-inspired polydopamine coatings

Hybrid structure combining essential oil derivatives and polydopamine for anti-bacterial coatings

The development of effective antimicrobial surfaces is crucial for reducing the risk of medical device-associated infections. This study investigates the antibacterial potential of carvacrol (CAR), a natural essential oil, after their surface immobilization onto gold (Au) substrates through a polydopamine (pDA) layer. The successful deposition and properties of each layer were characterized using ellipsometry, water contact angle (WCA) measurements, Fourier Transform Infrared Reflection-Absorption Spectroscopy (FT-IRRAS), X-ray Photoelectron Spectroscopy (XPS), and Atomic Force Microscopy (AFM). The resulting coatings displayed a thin, uniform film with smooth topography and with enhanced hydrophilicity. Antibacterial efficacy was assessed against Staphylococcus epidermidis, a relevant etiological agent in this context. The results revealed that the polydopamine-carvacrol coated surfaces (Au-pDA-CAR) exhibited a significant reduction in bacterial viability, achieving a 96 % decrease compared to unmodified gold surfaces. This was contrasted with minimal antibacterial activity from surfaces with either only polydopamine (Au-pDA) or carvacrol (Au-CAR). Live/Dead bacterial viability assays confirmed the bactericidal effect of the Au-pDA-CAR surface, demonstrating its effectiveness in killing bacteria rather than merely preventing adhesion. Our findings indicate that the pDA-CAR coating presents a promising approach for developing antimicrobial surfaces with enhanced performance against biofilm-forming pathogens. The development of this coating is an important step towards the establishment of a new technological platform capable of preventing medical device associated infections.

A Sunlight-Driven Self-Cleaning CuCo-MOF Composite Membrane for Highly Efficient Emulsion Separation and Water Purification

The fouling phenomenon of membranes has hindered the rapid development of separation technology in wastewater treatment. The integration of materials into membranes with both excellent separation performance and self-cleaning properties still pose challenges. Here, a self-assembled composite membrane with solar-driven self-cleaning performance is reported for the treatment of complex oil-water emulsions. The mechanical robustness of the composite membrane is enhanced by the electrostatic attraction between chitosan and metal-organic frameworks (MOF) CuCo-HHTP as well as the crosslinking effect of glutaraldehyde. Molecular dynamics (MD) simulations also revealed the hydrogen bonding interaction between chitosan and CuCo-HHTP. The composite membrane of CuCo-HHTP-5@CS/MPVDF exhibits a high flux ranging from 700.6 to 2350.6 L∙m-2∙h-1∙bar-1 and excellent separation efficiency (>99.0%) for various oil-water emulsions, including crude oil, kerosene, and other light oils. The addition of CuCo-HHTP shows remarkable photothermal effects, thus demonstrating excellent solar-driven self-cleaning capability and antibacterial performance (with an efficiency of ≈100%). Furthermore, CuCo-HHTP-5@CS/MPVDF can activate peroxomonosulfate (PMS) under sunlight, quickly removing oil-fouling and dyes. Density functional theory (DFT) calculations indicate that the bimetallic sites of Cu and Co in CuCo-HHTP effectively promoted the activation of PMS. This study provides distinctive insights into the multifaceted applications of MOFs-derived photothermal anti-fouling composite membranes.

An antifouling electrochemical aptasensor based on a polydopamine-polyzwitterion copolymer for tetracycline analysis

Matrix interference resulting from the nonspecific adsorption of non-target components, particularly proteins (fouling), onto sensor surfaces poses a persistent challenge in electrochemical detection of food hazards. The development of antifouling sensor surfaces presents a viable approach to mitigate nonspecific adsorption. In this study, a novel antifouling electrochemical aptasensor, utilizing a zwitterionic polymer, was developed for the sensitive, accurate, and selective detection of tetracycline (TC) in milk. This sensor employs a poly (dopamine)-poly (sulfobetaine methacrylate) (PDA-PSBMA) antifouling copolymer, which is synthesized through an in-situ initiated copolymerization of dopamine on the sensor's surface. Subsequently, the thiol-containing aptamers were immobilized onto the PDA-PSBMA coating through a Michael addition reaction with the poly(dopamine). The resulting antifouling electrochemical aptasensor exhibited robust antifouling performance in various single protein solutions and diluted milk samples, coupled with sensitive and selective recognition of TC. The sensor demonstrated a broad linear response range of 0.1-1000.0 ng mL-1 and a low limit of detection (LOD) of 68.0 pg mL-1. The antifouling electrochemical aptasensor proved effective in assaying TC in diluted milk, with recoveries ranging from 100.0 % to 104.4 %, eliminating the need for additional pretreatments due to its exceptional resistance to nonspecific adhesion.

High flux novel polymeric membrane for renal applications

Biocompatibility and the ability to mediate the appropriate flux of ions, urea, and uremic toxins between blood and dialysate components are key parameters for membranes used in dialysis. Oxone-mediated TEMPO-oxidized cellulose nanomaterials have been demonstrated to be excellent additives in the production and tunability of ultrafiltration and dialysis membranes. In the present study, nanocellulose ionic liquid membranes (NC-ILMs) were tested in vitro and ex vivo. An increase in flux of up to two orders of magnitude was observed with increased rejection (about 99.6%) of key proteins compared to that of polysulfone (PSf) and other commercial membranes. NC-ILMs have a sharper molecular weight cut-off than other phase inversion polymeric membranes, allowing for high throughput of urea and a uremic toxin surrogate and limited passage of proteins in dialysis applications. Superior anti-fouling properties were also observed for the NC-ILMs, including a > 5-h operation time with no systemic anticoagulation in blood samples. Finally, NC-ILMs were found to be biocompatible in rat ultrafiltration and dialysis experiments, indicating their potential clinical utility in dialysis and other blood filtration applications. These superior properties may allow for a new class of membranes for use in a wide variety of industrial applications, including the treatment of patients suffering from renal disease.

Enhancing Physiochemical Substrate Properties of Thin-Film Composite Membranes for Water and Wastewater Treatment via Engineered Osmosis Process

The commercial thin-film composite (TFC) nanofiltration (NF) membrane is unsuitable for engineered osmosis processes because of its thick non-woven fabric and semi-hydrophilic substrate that could lead to severe internal concentration polarization (ICP). Hence, we fabricated a new type of NF-like TFC membrane using a hydrophilic coated polyacrylonitrile/polyphenylsulfone (PAN/PPSU) substrate in the absence of non-woven fabric, aiming to improve membrane performance for water and wastewater treatment via the engineered osmosis process. Our results showed that the substrate made of a PAN/PPSU weight ratio of 1:5 could produce the TFC membrane with the highest water flux and divalent salt rejection compared to the membranes made of different PAN/PPSU substrates owing to the relatively good compatibility between PAN and PPSU at this ratio. The water flux of the TFC membrane was further improved without compromising salt rejection upon the introduction of a hydrophilic polydopamine (PDA) coating layer containing 0.5 g/L of graphene oxide (PDA/GO0.5) onto the bottom surface of the substrate. When tested using aerobically treated palm oil mill effluent (AT-POME) as a feed solution and 4 M MgCl2 as a draw solution, the best performing TFC membrane with the hydrophilic coating layer achieved a 67% and 41% higher forward osmosis (FO) and pressure retarded osmosis (PRO) water flux, respectively, compared to the TFC membrane without the coating layer. More importantly, the coated TFC membrane attained a very high color rejection (>97%) during AT-POME treatment, while its water flux and reverse solute flux were even better compared to the commercial NF90 and NF270 membranes. The promising outcomes were attributed to the excellent properties of the PAN/PPSU substrate that was coated with a hydrophilic PDA/GO coating and the elimination of the thick non-woven fabric during TFC membrane fabrication.

Biocompatibility evaluation of polyethersulfone-pyrolytic carbon composite membrane in artificial pancreas

Polyethersulfone (PES) membranes are widely used in medical devices, especially intravascular devices such as intravascular bioartificial pancreases. In the current work, the pure PES and PES-pyrolytic carbon (PyC) composite membranes were synthesized and permeability studies were conducted. In addition, the cytocompatibility and hemocompatibility of the pure PES and PES-PyC membranes were investigated. These materials were characterized using peripheral blood mononuclear cell (PBMC) activation, platelet activation, platelet adhesion, ß-cell viability and proliferation, and ß-cell response to hyperglycemia. The results showed that platelet activation decreased from 87.3% to 27.8%. Any alteration in the morphology of sticking platelets was prevented, and the number of attached platelets decreased by modification with PyC. The 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay corroborated that PBMC activation was encouraged by the PyC-modified PES membrane surface. It can be concluded that PES-modified membranes show higher hemocompatibility than pure PES membranes. ß-cells cultured on all the three membranes displayed a lower rate of proliferation although the cells on the PES-PyC (0.1 wt. %) membrane indicated a slightly higher viability and proliferation than those on the pure PES and PES-PyC (0.05 wt. %) membranes. It shows that the PES-PyC (0.1 wt. %) membrane possesses superior cytocompatibility over the other membranes.

Spatiotemporal Delivery of pBMP2 and pVEGF by a Core-Sheath Structured Fiber-Hydrogel Gene-Activated Matrix Loaded with Peptide-Modified Nanoparticles for Critical-Sized Bone Defect Repair

The clinical translation of bioactive scaffolds for the treatment of large segmental bone defects remains a grand challenge. The gene-activated matrix (GAM) combining gene therapy and tissue engineering scaffold offers a promising strategy for the restoration of structure and function of damaged or dysfunctional tissues. Herein, a gene-activated biomimetic composite scaffold consisting of an electrospun poly(ε-caprolactone) fiber sheath and an alginate hydrogel core which carried plasmid DNA encoding bone morphogenetic protein 2 (pBMP2) and vascular endothelial growth factor (pVEGF), respectively, is developed. A peptide-modified polymeric nanocarrier with low cytotoxicity and high efficiency serves as the nonviral DNA delivery vector. The obtained GAM allows spatiotemporal release of pVEGF and pBMP2 and promotes osteogenic differentiation of preosteoblasts in vitro. In vivo evaluation using a critical-sized segmental femoral defect model in rats shows that the dual gene delivery system can significantly accelerate bone healing by activating angiogenesis and osteogenesis. These findings demonstrate the effectiveness of the developed dual gene-activated core-sheath structured fiber-hydrogel composite scaffold for critical-sized bone defect regeneration and the potential of cell-free scaffold-based gene therapy for tissue engineering.

Controlled pVEGF delivery via a gene-activated matrix comprised of a peptide-modified non-viral vector and a nanofibrous scaffold for skin wound healing

Regulating cell function and tissue formation by combining gene delivery with functional scaffolds to create gene-activated matrices (GAMs) is a promising strategy for tissue engineering. However, fabrication of GAMs with low cytotoxicity, high transfection efficiency, and long-term gene delivery properties remains a challenge. In this study, a non-viral DNA delivery nanocomplex was developed by modifying poly (D, L-lactic-co-glycolic acid)/polyethylenimine (PLGA/PEI) nanoparticles with the cell-penetrating peptide KALA. Subsequently, the nanocomplex carrying plasmid DNA encoding vascular endothelial growth factor (pVEGF) was immobilized onto a polydopamine-coated electrospun alginate nanofibrous scaffold, resulting in a GAM for enhanced skin wound healing. The nanocomplex exhibited much lower cytotoxicity and comparable or even higher transfection efficiency compared with PEI. The GAM enabled sustained gene release and long-tern transgene expression of VEGF in vitro. In an excisional full-thickness skin wound rat model, the GAM could accelerate wound closure, promote complete re-epithelization, reduce inflammatory response, and enhance neovascularization, ultimately enhancing skin wound healing. The current GAM comprising a low-toxic gene delivery nanocomplex and a biocompatible 3D nanofibrous scaffold demonstrates great potential for mediating long-term cell functions and may become a powerful tool for gene delivery in tissue engineering. STATEMENT OF SIGNIFICANCE: Gene delivery is a promising strategy in promoting tissue regeneration as an effective alternative to growth factor delivery, but the study on three-dimensional gene-activated scaffolds remains in its infancy. Herein, a biodegradable nanofibrous gene-activated matrix integrating non-viral nanoparticle vector was designed and evaluated both in vitro and in vivo. The results show that the nanoparticle vector provided high transfection efficiency with minimal cytotoxicity. After surface immobilization of the nanocomplexes carrying plasmid DNA encoding vascular endothelial growth factor (pVEGF), the nanofibrous scaffold enabled sustained DNA release and long-term transgene expression in vitro. In a rat full-thickness skin wound model, the scaffold could accelerate wound healing. This innovative gene-activated matrix can be a promising candidate for tissue regeneration.

Polydopamine surface functionalization of 3D printed resin material for enhanced polystyrene adhesion towards insulation layers for 3D microelectrode arrays (3D MEAs)

3D printing involves the use of photopolymerizable resins, which are toxic and typically have incompatible properties with materials such as polystyrene (PS), which present limitations for biomedical applications. We present a method to dramatically improve the poor adhesion between the PS insulative layer on 3D printed Microelectrode Array (MEA) substrates by functionalizing the resin surface with polydopamine (PDA), a mussel-inspired surface chemistry derivative. A commercial 3D printing prepolymer resin, FormLabs Clear (FLC), was printed using a digital light processing (DLP) printer and then surface functionalized with PDA by alkali-induced aqueous immersion deposition and self-polymerization. It was observed that the adhesion of the PS to FLC was improved due to the precision emanating from the DLP method and further improved after the functionalization of DLP printed substrates with PDA at 1, 12, and 24 h time intervals. The adhesion of PS was evaluated through scotch tape peel testing and instron measurements of planar substrates and incubation testing with qualitative analysis of printed culture wells. The composition and topology of the samples were studied to understand how the properties of the surface change after PDA functionalization and how this contributes to the overall improvement in PS adhesion. Furthermore, the surface energies at each PDA deposition time were calculated from contact angle studies as it related to adhesion. Finally, biocompatibility assays of the newly modified surfaces were performed using mouse cardiac cells (HL-1) to demonstrate the biocompatibility of the PDA functionalization process. PDA surface functionalization of 3D DLP printed FLC resin resulted in a dramatic improvement of thin film PS adhesion and proved to be a biocompatible solution for improving additive manufacturing processes to realize biosensors such as in vitro MEAs.

3D printing involves the use of toxic photopolymerizable resins which typically have incompatible properties with polystyrene for biomedical applications. Herein, we use 3D printing tricks and polydopamine to dramatically improve adhesion.

Mussel-inspired antimicrobial coating on PTFE barrier membranes for guided tissue regeneration

Guided tissue regeneration procedures to treat periodontitis lesions making use of polytetrafluoroethylene (PTFE) membranes exhibit large variability in their surgical outcomes, due to bacterial infection following implantation. This work reports on a facile method to obtain antimicrobial coatings for such PTFE membranes, by exploiting a mussel-inspired approach andin-situformation of silver nanoparticles (AgNPs). PTFE films were initially coated with self-polymerized 3,4-dihydroxy-DL-phenylalanine (DOPA) (PTFE-DOPA), then incubated with AgNO₃solution. In the presence of catechol moieties, Ag⁺ions reduced into Ag⁰, forming AgNPs of around 68 nm in the polyDOPA coating on PTFE membranes (PTFE-DOPA-Ag). The x-ray photoelectron spectroscopy, atomic force microscopy and scanning electron microscopy analyses indicated that the AgNPs were distributed quite homogeneously in the polymeric membrane. The antimicrobial ability of PTFE-DOPA-Ag membranes againstStaphylococcus aureusandEscherichia coliwas assessed.In vitrocell assay using NIH 3T3 fibroblasts showed that, although cells were adhered to PTFE-DOPA-Ag membranes, their viability and proliferation were limited demonstrating again the antibacterial activities of PTFE-DOPA-Ag membranes. This work provides proof-of-concept study of a new versatile approach for AgNPs coating, which may be easily applied to many other types of polymeric or metallic implants through exploiting the adhesive behavior of mussel-inspired coatings.

Green and sustainable method of manufacturing anti-fouling zwitterionic polymers-modified poly(vinyl chloride) ultrafiltration membranes

The nonsolvent induced phase separation (NIPS) method for ultrafiltration (UF) membrane fabrication relies on the extensive use of traditional solvents, thus ranking first in terms of ecological impacts among all the membrane fabrication steps. Methyl-5-(dimethylamino)-2-methyl-5-oxopentanoate (PolarClean), as a green solvent, was utilized in this study to fabricate poly(vinyl chloride) (PVC) UF membranes. Subsequently, in post-treatment process, zwitterionic polymer, [2-(methacryloyloxy) ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide (DMAPS), was grafted onto the membrane surface to enhance its anti-fouling properties using a greener surface-initiated activator regenerated by electron transfer-atom transfer radical polymerization (ARGET-ATRP) reaction. This novel method used low toxicity chemicals, avoiding the environmental hazards of traditional ATRP, and greatly improving the reaction efficiency. We systematically studied the grafting time effect on the resulted membranes using sodium alginate as the foulant, and found that short grafting time (30 min) achieved excellent membrane performance: pure water permeability of 2872 L m^-2 h^-1 bar^-1, flux recovery ratio of 86.4% after 7-hour fouling test, and foulant rejection of 96.0%. This work discusses for the first time the greener procedures with lower environmental impacts in both fabrication and modification processes of PVC UF membranes.

Copper-Modified Polymeric Membranes for Water Treatment: A Comprehensive Review

In the last decades, the incorporation of copper in polymeric membranes for water treatment has received greater attention, as an innovative potential solution against biofouling formation on membranes, as well as, by its ability to improve other relevant membrane properties. Copper has attractive characteristics: excellent antimicrobial activity, high natural abundance, low cost and the existence of multiple cost-effective synthesis routes for obtaining copper-based materials with tunable characteristics, which favor their incorporation into polymeric membranes. This study presents a comprehensive analysis of the progress made in the area regarding modified membranes for water treatment when incorporating copper. The notable use of copper materials (metallic and oxide nanoparticles, salts, composites, metal-polymer complexes, coordination polymers) for modifying microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), forward osmosis (FO) and reverse osmosis (RO) membranes have been identified. Antibacterial and anti-fouling effect, hydrophilicity increase, improvements of the water flux, the rejection of compounds capacity and structural membrane parameters and the reduction of concentration polarization phenomena are some outstanding properties that improved. Moreover, the study acknowledges different membrane modification approaches to incorporate copper, such as, the incorporation during the membrane synthesis process (immobilization in polymer and phase inversion) or its surface modification using physical (coating, layer by layer assembly and electrospinning) and chemical (grafting, one-pot chelating, co-deposition and mussel-inspired PDA) surface modification techniques. Thus, the advantages and limitations of these modifications and their methods with insights towards a possible industrial applicability are presented. Furthermore, when copper was incorporated into membrane matrices, the study identified relevant detrimental consequences with potential to be solved, such as formation of defects, pore block, and nanoparticles agglomeration during their fabrication. Among others, the low modification stability, the uncontrolled copper ion releasing or leaching of incorporated copper material are also identified concerns. Thus, this article offers modification strategies that allow an effective copper incorporation on these polymeric membranes and solve these hinders. The article finishes with some claims about scaling up the implementation process, including long-term performance under real conditions, feasibility of production at large scale, and assessment of environmental impact.

A review on surface modification methods of poly(arylsulfone) membranes for biomedical applications

Considerable methods have so far been used for the surface modification of biomedical membranes. Several reviews and articles have been published on the improvements achieved in the field of poly(arylsulfone) membranes subjected to various surface modification methods and used in biomedical applications. This review concentrates on the surface modification, biological applications and future perspective of the poly(arylsulfone) biomedical membranes. Different surface modification procedures employed for the poly(arylsulfone) membranes have been classified, studied and compared. Diverse surface modification techniques include surface coating, chemical modification and immobilization/cross-linking, grafting, surface zwitterionicalization, mussel-inspired coating and layer-by-layer assembly. Furthermore, we review the recent research studies performed on the surface modification of the poly(arylsulfone) biomedical membranes. Meanwhile, the properties of biomedical membranes are also discussed in each section. At last, the future perspective and challenges of the strategies utilized for the surface modification of poly(arylsulfone) biomedical membranes are presented.

Recent Advances in the Rejection of Endocrine-Disrupting Compounds from Water Using Membrane and Membrane Bioreactor Technologies: A Review

Water is a critical resource necessary for life to be sustained, and its availability should be secured, appropriated, and easily obtainable. The continual detection of endocrine-disrupting chemicals (EDCs) (ng/L or µg/L) in water and wastewater has attracted critical concerns among the regulatory authorities and general public, due to its associated public health, ecological risks, and a threat to global water quality. Presently, there is a lack of stringent discharge standards regulating the emerging multiclass contaminants to obviate its possible undesirable impacts. The conventional treatment processes have reportedly ineffectual in eliminating the persistent EDCs pollutants, necessitating the researchers to develop alternative treatment methods. Occurrences of the EDCs and the attributed effects on humans and the environment are adequately reviewed. It indicated that comprehensive information on the recent advances in the rejection of EDCs via a novel membrane and membrane bioreactor (MBR) treatment techniques are still lacking. This paper critically studies and reports on recent advances in the membrane and MBR treatment methods for removing EDCs, fouling challenges, and its mitigation strategies. The removal mechanisms and the operating factors influencing the EDCs remediation were also examined. Membranes and MBR approaches have proven successful and viable to eliminate various EDCs contaminants.

PLGA Membranes Functionalized with Gelatin through Biomimetic Mussel-Inspired Strategy

Electrospun membranes have been widely used as scaffolds for soft tissue engineering due to their extracellular matrix-like structure. A mussel-inspired coating approach based on 3,4-dihydroxy-DL-phenylalanine (DOPA) polymerization was proposed to graft gelatin (G) onto poly(lactic-co-glycolic) acid (PLGA) electrospun membranes. PolyDOPA coating allowed grafting of gelatin to PLGA fibers without affecting their bulk characteristics, such as molecular weight and thermal properties. PLGA electrospun membranes were dipped in a DOPA solution (2 mg/mL, Tris/HCl 10 mM, pH 8.5) for 7 h and then incubated in G solution (2 mg/mL, Tris/HCl 10 mM, pH 8.5) for 16 h. PLGA fibers had an average diameter of 1.37 ± 0.23 µm. Quartz crystal microbalance with dissipation technique (QCM-D) analysis was performed to monitor DOPA polymerization over time: after 7 h the amount of deposited polyDOPA was 71 ng/cm2. After polyDOPA surface functionalization, which was, also revealed by Raman spectroscopy, PLGA membranes maintained their fibrous morphology, however the fiber size and junction number increased. Successful functionalization with G was demonstrated by FTIR-ATR spectra, which showed the presence of G adsorption bands at 1653 cm-1 (Amide I) and 1544 cm-1 (Amide II) after G grafting, and by the Kaiser Test, which revealed a higher amount of amino groups for G functionalized membranes. Finally, the biocompatibility of the developed substrates and their ability to induce cell growth was assessed using Neonatal Normal Human Dermal Fibroblasts.

Impact of MWCO and Dopamine/Polyethyleneimine Concentrations on Surface Properties and Filtration Performance of Modified Membranes

The mussel-inspired method has been investigated to modify commercial ultrafiltration membranes to induce antifouling characteristics. Such features are essential to improve the feasibility of using membrane processes in protein recovery from waste streams, wastewater treatment, and reuse. However, some issues still need to be clarified, such as the influence of membrane pore size and the polymer concentration used in modifying the solution. The aim of the present work is to study a one-step deposition of dopamine (DA) and polyethyleneimine (PEI) on ultrafiltration membrane surfaces. The effects of different membrane molecular weight cut-offs (MWCO, 20, 30, and 50 kDa) and DA/PEI concentrations on membrane performance were assessed by surface characterization (FTIR, AFM, zeta potential, contact angle, protein adsorption) and permeation of protein solution. Results indicate that larger MWCO membranes (50 kDa) are most benefited by modification using DA and PEI. Moreover, PEI is primarily responsible for improving membrane performance in protein solution filtration. The membrane modified with 0.5:4.0 mg mL^-1 (DA: PEI) presented a better performance in protein solution filtration, with only 15% of permeate flux drop after 2 h of filtration. The modified membrane can thus be potentially applied to the recovery of proteins from waste streams.

Constructing interlayer to tailor structure and performance of thin-film composite polyamide membranes: A review

Thin-film composite (TFC) structured membranes based on polyamide (PA) chemistry is the gold standard of nanofiltration and reverse osmosis-based technologies for water purification and desalination. Constructing interlayer between porous substrate and PA layer is a promising strategy to address the ubiquitous trade-off between permeability and selectivity, which is typically encountered by conventional TFC PA membranes. The progress in the interlayer benefits the precise control of interfacial polymerization process, which therefore can tailor the structure and performance of advanced TFC PA membranes. This review critically summarizes the recent advances in TFC PA membranes mediated by interlayer. The mechanisms of interlayer regulating the IP process and PA structure are first discussed based on available literature. Structure and performance of novel TFC PA membranes based on three kinds of interlayers, i.e., organic coatings, nanomaterial and nanocomposite interlayers, are systematically reviewed. Finally, perspectives and future efforts needed are proposed for interlayer based TFC PA membranes. This review offers comprehensive understanding and useful guidance on the rational design of advanced membranes mediated by interlayers for desalination and water purification.

Surface modification of polypropylene membrane for the removal of iodine using polydopamine chemistry

The development of stable and effective iodine removal systems would be highly desirable in addressing environmental issues relevant to water contamination. In the present research, a novel iodine adsorbent was synthesized by self-polymerization of dopamine (PDA) onto inert polypropylene (PP) membrane. This PP/PDA membrane was thoroughly characterized and its susrface propeties was analyzed by various analytical techniques indcluding field emission scanning electron microscopy (FESEM), atomic force microscopy (AFM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), Brunauer-Emmett-Teller (BET) and Barrett-Joyner-Halenda (BJH), contact angle, and surface free energy measurement. The PP/PDA membranes were subsequently used for batchwise removal of iodine at different temperatures (25-70 °C), pH (2-7), and surface areas (1-10 cm²) to understand the underlying adsorption phenomena and to estimate the membrane capacity for iodine uptake. The increase in temperature and pH both led to higher adsorption of iodine. The present approach showed a removal efficiency of over 75% for iodine using 10 cm² PP/PDA membrane (18.87 m² g^-1) within 2 h at moderate temperatures (∼50 °C) and pH > 4, about 15 fold compared to the PP control membrane. The adsorption kinetics and isotherms were well fitted to the pseudo-second-order kinetic and Langmuir isotherm models (R² > 0.99). This adsorbent can be recycled and reused at least six times with stable iodine adsorption. These findings were attributed to the homogenous monolayer adsorption of the iodide on the surface due to the presence of catechol and amine groups in the PP/PDA membrane. This study proposes an efficient adsorbent for iodine removal.

Development of Polydopamine Forward Osmosis Membranes with Low Reverse Salt Flux

Application of forward osmosis (FO) is limited due to membrane fouling and, most importantly, high reverse salt fluxes that deteriorate the concentrated product. Polydopamine (PDA) is a widely used, easily applicable, hydrophilic, adhesive antifouling coating. Among the coating parameters, surprisingly, the effect of PDA coating temperature on the membrane properties has not been well studied. Polyethersulfone (PES) 30 kDa ultrafiltration membranes were PDA-coated with varying dopamine concentrations (0.5-3 g/L) and coating temperatures (4-55 °C). The quality of the applied coating has been determined by surface properties, water permeability and reverse salt flux using a 1.2 M MgSO₄ draw solution. The coating thickness increased both with the dopamine concentration and coating temperature, the latter having a remarkably stronger effect resulting in a higher PDA deposition speed and smaller PDA aggregates. In dead‑end stirred cell, the membranes coated at 55 °C with 2.0 g/L dopamine showed NaCl and MgSO₄ retentions of 41% and 93%, respectively. In crossflow FO, a low reverse MgSO₄ flux (0.34 g/m²·h) was found making a very low specific reverse salt flux (J_s/J_w) of 0.08 g/L, which outperformed the commercial CTA FO membranes, showing the strong benefit of high temperature PDA-coated PES membranes to assure high quality products.

Green Fabrication of Tannic Acid-Inspired Magnetic Composite Nanoparticles toward Cationic Dye Capture and Selective Degradation

An environmental strategy for developing sustainable materials presents an attractive prospect for wastewater remediation. Herein, a facile, green, and economical strategy is proposed to fabricate magnetic composite nanoparticles (NPs) toward cationic dye adsorption and selective degradation. To prepare the composite TiO2-PEI-TA@Fe3O4 NPs, tannic acid (TA) and polyethyleneimine (PEI) were first used to decorate Fe3O4 NPs at aqueous solution, and then TiO2 NPs were anchored onto the surfaces of Fe3O4 NPs based on the catecholamine chemistry. The chemical composition and microstructure of the obtained NPs were systematically characterized. The NPs not only exhibited adsorption ability for the cationic dye of methylene blue (MB) but also responded to ultraviolet light to selectively degrade the adsorbed MB, and the removal (adsorption and/or degradation) ratio for MB could reach 95%. In addition, cyclic experiments showed that the removal ratio of the composite NPs for MB could still be maintained more than 85% even after five cycles. Given by the above-mentioned advantages, such a green and facile strategy for combining the adsorption and degradation methods to construct magnetic nanocomposites exhibits potential applications in cationic dye selective removal and sustainable wastewater remediation.