Bimetallic metal-organic frameworks nanocages as multi-functional fillers for water-selective membranes

Surface-Engineered 2D Bimetallic FeNi-MOFs Derived from Layered Double Hydroxides for Photocatalytic Membranes with Enhanced Dye Fixation in Wastewater Treatment

FeNi-based layered double hydroxides (LDHs) are used as precursors to derive bimetallic FeNi-metal organic frameworks (D-FeNi MOFs) with terephthalic acid ligands, offering enhanced properties compared to conventionally prepared FeNi-MOFs (C-FeNi MOFs). D-FeNi MOFs exhibited superior structural, surface, and electrochemical features, confirmed by density functional theory (DFT) studies, which also predicted their catalytic mechanism. Band edge potential calculations through Mott-Schottky analysis revealed their favorable redox potential, enhanced charge transfer, and reduced recombination resistance, explaining their superior photocatalytic efficiency. D-FeNi MOFs degraded 91% of rhodamine B (RhB) and 89% of Congo red (CR), outperforming C-FeNi MOFs, which degraded 84% and 77%, respectively. These MOFs are incorporated (3, 5, and 7 wt%) into polysulfone (PSU) membranes to develop photocatalytic membranes. The 7 wt% membranes (FNM7) exhibited high water flux (54.4 L m-2h-1) and dye flux (≈51.1 and 41.6 L m-2h-1) with rejection rates of ≈88% and 90% for RhB and CR, significantly surpassing bare membranes. FNM7 demonstrated superior anti-fouling and photocatalytic regeneration (12.9% RhB, 9.6% CR degradation under sunlight) across three cycles. DFT studies showed FeNi centers weaken dye molecule bonds, aiding degradation, while carboxyl groups in MOFs formed robust hydrogen bonds with PSU, ensuring no particle leaching. This highlights D-FeNi MOF-membranes as an efficient system for wastewater treatment.

Sodium Alginate-Based Carbon Aerogel-Supported ZIF-8-Derived Porous Carbon as an Effective Adsorbent for Methane Gas

Adsorption natural gas (ANG) is a technology in which natural gas is stored on the surface of porous materials at relatively low pressures, which are promising candidates for adsorption of natural gas. Adsorbent materials with a large surface area and porous structure plays a significant role in the ANG technology, which holds promise in increasing the storage density for natural gas while decreasing the operating pressure. Here, we demonstrate a facile synthetic method for rational construction of a sodium alginate (SA)/ZIF-8 composite carbon aerogel (AZSCA) by incorporating ZIF-8 particles into SA aerogel through a directional freeze-drying method followed by the carbonization process. The structure characterization shows that AZSCA has a hierarchical porous structure, in which the micropores originated from MOF while the mesopores are derived from the three-dimensional network of the aerogel. The experimental results show that AZSCA achieved high methane adsorption of 181 cm³·g^-1 at 65 bar and 298 K, along with higher isosteric heat of adsorption (Q_st) throughout the adsorption range. Thus, the combination of MOF powders with aerogel can find potential applications in other gas adsorption.

Bimetallic Metal-Organic Frameworks (BMOF) and BMOF- Incorporated Membranes for Energy and Environmental Applications

Bimetallic metal organic frameworks (BMOFs) are a class of crystalline solids and their structure comprises two metal ions in the lattice. BMOFs show a synergistic effect of two metal centres and enhanced properties compared to MOFs. By controlling the composition and relative distribution of two metal ions in the lattice the structure, morphology, and topology of BMOFs could be regulated resulting in an improvement in the tunability of pore structure, activity, and selectivity. Thus, developing BMOFs and BMOF incorporated membranes for applications such as adsorption, separation, catalysis, and sensing is a promising strategy to mitigate environmental pollution and address the looming energy crisis. Herein we present an overview of recent advancements in the area of BMOFs and a comprehensive review of BMOF incorporated membranes reported to date. The scope, challenges as well as future perspectives for BMOFs and BMOF incorporated membranes are presented.

Development of sodium alginate-based antioxidant and antibacterial bioactive films added with IRMOF-3/Carvacrol

The purpose of this study was to compare the effects of different concentrations of the amine-functionalized isoreticular metal-organic framework-3 loaded with carvacrol (IRMOF-3/CA) on the properties of sodium alginate (SA) composite films, thus determining the optimal addition amount and further preparing bioactive packaging film with antibacterial and antioxidant activities. The morphology, structure, physical properties, antioxidant and antibacterial activities of the films were characterized and analyzed. The results showed that the thermal stability and light barrier property of the films were improved by the addition of IRMOF-3/CA. When the additional concentration was 0.4 wt%, the tensile, water vapor barrier and hydrophobic properties of the films were increased by 30.13%, 9.06% and 46.43% respectively compared with those of pure SA film. Moreover, the film added with IRMOF-3/CA had sustained antioxidant and antibacterial activities, and had an apparent fresh-keeping effect on pork, suggesting its application potential in food packaging.

Smart MOF-on-MOF Hydrogel as a Simple Rod-shaped Core for Visual Detection and Effective Removal of Pesticides

The immoderate use of pesticides in the modern agricultural industry has led to the pollution of water resources and ultimately threatens the human body. Herein, two metal-organic frameworks (MOFs), namely {[Zn(tpt)₂ ·2H₂ O]}_n (Zn1) and {[Zn₂ (tpt)₂ (bdc)]}_n (Zn2), (Htpt = 5-[4(1H-1,2,4-triazol-1-yl)]phenyl-2H-tetrazole), respectively, are constructed as smart materials for visual and on-site detection of pesticides and their removal from water. The exposed nitrogen-rich sites and high chemical stability make Zn2 a self-assembly core to further fabricate MOF-on-MOF-sodium alginate (ZIF-8-on-Zn2@SA) composite by wrapping ZIF-8 on the outside surface. Inheriting the excellent fluorescent emission of Zn2, the rod-like ZIF-8-on-Zn2@SA module exhibits naked-eye detection of thiophanate-methyl (TM) in real fruits and vegetables with a broad linear range (10-100 × 10^-6  m), a low limit of detection (LOD = 0.14 × 10^-6  m), and satisfactory recoveries (98.30-102.70%). In addition, carbendazim (CBZ), the metabolite of TM after usage in crops, can be efficiently removed from water by the ZIF-8-on-Zn2@SA (q_max  = 161.8 mg g^-1 ) with a high correlation coefficient (R²  > 0.99). Therefore, the portable ZIF-8-on-Zn2@SA sensing platform presents a promising candidate for monitoring and removal of pesticides, especially suitable for regions with serious pesticide environmental pollution.

Highly Sensitive Capsaicin Electrochemical Sensor Based on Bimetallic Metal-Organic Framework Nanocage

The content of capsaicin can be used as exotic markers of kitchen recycled oil. In this study, a bimetallic MOF nanocage (Fe^III-HMOF-5) was successfully prepared by a one-step solvothermal method and used for electrode modification to prepare a highly sensitive electrochemical sensor for rapid detection of capsaicin. Capsaicin could be selectively immobilized onto the Fe^III-HMOF-5 surface during infiltrating adsorption, thus exhibiting very excellent sensing performance. The detection conditions of the sensor were optimized. Under optimum conditions, the electrochemical sensor can linearly detect capsaicin in the range between 1–60 μM with a detection limit of 0.4 μM. In addition, the proposed electrochemical sensor showed excellent stability and selectivity. The real sample tests indicated the proposed electrochemical sensor was comparable to conventional UV spectrophotometry.

Mixed Manganese Dioxide on Magnetite Core MnO2@Fe3O4 as a Filler in a High-Performance Magnetic Alginate Membrane

The process of ethanol dehydration via pervaporation was performed using alginate membranes filled with manganese dioxide and a mixed filler consisting of manganese dioxide on magnetite core MnO₂@Fe₃O₄ particles. The crystallization of manganese dioxide on magnetite nanoparticle surface resulted in a better dispersibility of this mixed filler in polymer matrix, with the preservation of the magnetic properties of magnetite. The prepared membranes were characterized by contact angle, degree of swelling and SEM microscopy measurements and correlated with their effectiveness in the pervaporative dehydration of ethanol. The results show a strong relation between filler properties and separation efficiency. The membranes filled with the mixed filler outperformed the membranes containing only neat oxide, exhibiting both higher flux and separation factor. The performance changed depending on filler content; thus, the presence of optimum filler loading was observed for the studied membranes. The best results were obtained for the alginate membrane filled with 7 wt.% of mixed filler MnO₂@Fe₃O₄ particles. For this membrane, the separation factor and flux equalled to 483 and 1.22 kg·m⁻²·h⁻¹, respectively.

Novel Pervaporation Membranes Based on Biopolymer Sodium Alginate Modified by FeBTC for Isopropanol Dehydration

Modern society strives for the development of sustainable processes that are aimed at meeting human needs while preserving the environment. Membrane technologies satisfy all the principles of sustainability due to their advantages, such as cost-effectiveness, environmental friendliness, absence of additional reagents and ease of use compared to traditional separation methods. In the present work, novel green membranes based on sodium alginate (SA) modified by a FeBTC metal–organic framework were developed for isopropanol dehydration using a membrane process, pervaporation. Two kinds of SA-FeBTC membranes were developed: (1) untreated membranes and (2) cross-linked membranes with citric acid or phosphoric acid. The structural and physicochemical properties of the developed SA-FeBTC membranes were studied by spectroscopic techniques (FTIR and NMR), microscopic methods (SEM and AFM), thermogravimetric analysis and swelling experiments. The transport properties of developed SA-FeBTC membranes were studied in the pervaporation of water–isopropanol mixtures. Based on membrane transport properties, 15 wt % FeBTC was demonstrated to be the optimal content of the modifier in the SA matrix for the membrane performance. A membrane based on SA modified by 15 wt % FeBTC and cross-linked with citric acid possessed optimal transport properties for the pervaporation of the water–isopropanol mixture (12–100 wt % water): 174–1584 g/(m2 h) permeation flux and 99.99 wt % water content in the permeate.

Influence of Substituents in Terephthalate Linker on the Structure of MOFs Obtained from Presynthesized Heterometallic Complex

The synthesis of new porous materials with desired properties is a challenging task. It becomes especially difficult if you need to combine several metals in one framework to obtain a heterometallic node. The use of presynthesized complexes for obtaining of new heterometallic metal–organic frameworks could be essential to solve the problem of tailored synthesis. In our study we use presynthesized heterometallic pivalate complex [Li2Zn2(piv)6(py)2] to obtain new MOFs with heterometallic core as a node of the framework. We are managed to obtain four new heterometallic MOFs: [H2N(CH3)2]2[Li2Zn2(bdc)4]·CH3CN·DMF (1), [Li2Zn2(H2Br2-bdc)(Br2-bdc)3]·2DMF (2), [H2N(CH3)2][LiZn2(ndc)3]·CH3CN (3) and [{Li2Zn2(dmf)(py)2}{LiZn(dmf)2}2 (NO2-bdc)6]·5DMF (4). Moreover three of them contain starting tetranuclear core {Li2Zn2} and saves its geometry. We also demonstrate the influence of substituent in terephthalate ring on preservation of tetranuclear core. For compound 1 it was shown that luminescence of the framework could be quenched when nitrobenzene is included in the pores.

Metal and Covalent Organic Frameworks for Membrane Applications

Better and more efficient membranes are needed to face imminent and future scientific, technological and societal challenges. New materials endowed with enhanced properties are required for the preparation of such membranes. Metal and Covalent Organic Frameworks (MOFs and COFs) are a new class of crystalline porous materials with large surface area, tuneable pore size, structure, and functionality, making them a perfect candidate for membrane applications. In recent years an enormous number of articles have been published on the use of MOFs and COFs in preparation of membranes for various applications. This review gathers the work reported on the synthesis and preparation of membranes containing MOFs and COFs in the last 10 years. Here we give an overview on membranes and their use in separation technology, discussing the essential factors in their synthesis as well as their limitations. A full detailed summary of the preparation and characterization methods used for MOF and COF membranes is given. Finally, applications of these membranes in gas and liquid separation as well as fuel cells are discussed. This review is aimed at both experts in the field and newcomers, including students at both undergraduate and postgraduate levels, who would like to learn about preparation of membranes from crystalline porous materials.

Metal-Organic Framework Membranes and Membrane Reactors: Versatile Separations and Intensified Processes

Metal-organic frameworks are an emerging and fascinating category of porous solids that can be self-assembled with metal-based cations linked by organic molecules. The unique features of MOFs in porosity (or surface areas), together with their diversity for chemical components and architectures, make MOFs attractive candidates in many applications. MOF membranes represent a long-term endeavor to convert MOF crystals in the lab to potentially industry-available commodities, which, as a promising alternative to distillation, provide a bright future for energy-efficient separation technologies closely related with chemicals, the environment, and energy. The membrane reactor shows a typical intensified process strategy by combining the catalytic reaction with the membrane separation in one unit. This review highlights the recent process of MOF-based membranes and the importance of MOF-based membrane reactors in relative intensified chemical processes.

Novel Mixed Matrix Sodium Alginate-Fullerenol Membranes: Development, Characterization, and Study in Pervaporation Dehydration of Isopropanol

Novel mixed matrix dense and supported membranes based on biopolymer sodium alginate (SA) modified by fullerenol were developed. Two kinds of SA–fullerenol membranes were investigated: untreated and cross-linked by immersing the dry membranes in 1.25 wt % calcium chloride (CaCl₂) in water for 10 min. The structural and physicochemical characteristics features of the SA–fullerenol composite were investigated by Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopic methods, scanning electron (SEM) and atomic force (AFM) microscopies, thermogravimetric analysis (TGA), and swelling experiments. Transport properties were evaluated in pervaporation dehydration of isopropanol in a wide concentration range. It was found that the developed supported cross-linked SA-5/PAN^CaCl2 membrane (modified by 5 wt % fullerenol) possessed the best transport properties (the highest permeation fluxes 0.64–2.9 kg/(m² h) and separation factors 26–73,326) for the pervaporation separation of the water–isopropanol mixture in the wide concentration range (12–90 wt % water) at 22 °C and is suitable for the promising application in industry.

Membranes for dehydration of alcohols via pervaporation

Alcohols are the essential chemicals used in a variety of pharmaceutical and chemical industries. The extreme purity of alcohols in many of such industrial applications is essential. Though distillation is one of the methods used conventionally to purify alcohols, the method consumes more energy and requires carcinogenic entertainers, making the process environmentally toxic. Alternatively, efforts have been made to focus research efforts on alcohol dehydration by the pervaporation (PV) separation technique using polymeric membranes. The present review is focused on alcohol dehydration using PV separation technique, which is the most efficient and benign method of purifying alcohols that are required in fine chemicals synthesis and developing pharmaceutical formulations. This review will discuss about the latest developments in the area of PV technique used in alcohol dehydration using a variety of novel membranes.

Incorporating Graphene Oxide into Alginate Polymer with a Cationic Intermediate To Strengthen Membrane Dehydration Performance

Two-dimensional graphene oxide (GO) in hybrid membranes provides fast water transfer across its surface due to the abundant oxygenated functional groups to afford water sorption and the hydrophobic basal plane to create fast transporting pathways. To establish more compatible and efficient interactions for GO and sodium alginate (SA) polymer chains, cations sourced from lignin are employed to decorate GO (labeled as cation-functionalized GO (CG)) nanosheets via cation-π and π-π interactions, providing more interactive sites to confer synergetic benefits with polymer matrix. Cations from CG are also functional to partially interlock SA chains and intensify water diffusion. And with the aid of two-dimensional pathways of CG, fast selective water permeation can be realized through hybrid membranes with CG fillers. In dehydrating aqueous ethanol solution, the hybrid membrane exhibits considerable performance compared with bare SA polymer membrane (long-term stable permeation flux larger than 2500 g m^-2 h^-1 and water content larger than 99.7 wt %, with feed water content of 10 wt % under 70 °C). The effects of CG content in SA membrane were investigated, and the transport mechanism was correspondingly studied through varying operation conditions and membrane materials. In addition, such a membrane possesses long-term stability and almost unchanged high dehydration capability.