Biocatalytic membrane with acylase stabilized on intact carbon nanotubes for effective antifouling via quorum quenching

Nanomaterials Regulate Bacterial Quorum Sensing: Applications, Mechanisms, and Optimization Strategies

Anti-virulence therapy that interferes with bacterial communication, known as "quorum sensing (QS)", is a promising strategy for circumventing bacterial resistance. Using nanomaterials to regulate bacterial QS in anti-virulence therapy has attracted much attention, which is mainly attributed to unique physicochemical properties and excellent designability of nanomaterials. However, bacterial QS is a dynamic and multistep process, and there are significant differences in the specific regulatory mechanisms and related influencing factors of nanomaterials in different steps of the QS process. An in-depth understanding of the specific regulatory mechanisms and related influencing factors of nanomaterials in each step can significantly optimize QS regulatory activity and enhance the development of novel nanomaterials with better comprehensive performance. Therefore, this review focuses on the mechanisms by which nanomaterials regulate bacterial QS in the signal supply (including signal synthesis, secretion, and accumulation) and signal transduction cascade (including signal perception and response) processes. Moreover, based on the two key influencing factors (i.e., the nanomaterial itself and the environment), optimization strategies to enhance the QS regulatory activity are comprehensively summarized. Collectively, applying nanomaterials to regulate bacterial QS is a promising strategy for anti-virulence therapy. This review provides reference and inspiration for further research on the anti-virulence application of nanomaterials.

Biofouling in Membrane Bioreactors-Mitigation and Current Status: a Review

Biological fouling as termed biofouling is caused by varied living organisms and is difficult to eliminate from the environment thus becoming a major issue during membrane bioreactors. Biofouling in membrane bioreactors (MBRs) is a crucial problem in increasing liquid pressure due to reduced pore diameter, clogging of the membrane pores, and alteration of the chemical composition of the water which greatly limits the growth of MBRs. Thus, membrane biofouling and/or microbial biofilms is a hot research topic to improve the market competitiveness of the MBR technology. Though several antibiofouling strategies (addition of bioflocculant or sponge into MBRs) came to light, biological approaches are sustainable and more practicable. Among the biological approaches, quorum sensing-based biofouling control (so-called quorum quenching) is an interesting and promising tool in combating biofouling issues in the MBRs. Several review articles have been published in the area of membrane biofouling and mitigation approaches. However, there is no single source of information about biofouling and/or biofilm formation in different environmental settings and respective problems, antibiofilm strategies and current status, quorum quenching, and its futurity. Thus, the objectives of the present review were to provide latest insights on mechanism of membrane biofouling, quorum sensing molecules, biofilm-associated problems in different environmental setting and antibiofilm strategies, special emphasis on quorum quenching, and its futurity in the biofilm/biofouling control. We believe that these insights greatly help in the better understanding of biofouling and aid in the development of sustainable antibiofouling strategies.

Livestock and poultry farm wastewater treatment and its valorization for generating value-added products: Recent updates and way forward

Livestock and poultry wastewater poses a potent risk factor for environmental pollution accelerating disease load and premature deaths. It is characterized by high chemical oxygen demand, biological oxygen demand, suspended solids, heavy metals, pathogens, and antibiotics, among other contaminants. These contaminants have a negative impact on the quality of soil, groundwater, and air, and is a potential hazard to human health. Depending on the specific characteristics of wastewater, such as the type and concentration of pollutants present; several physical, chemical and biological strategies have been developed for wastewater treatment. This review aims at providing comprehensive overview of the profiling of livestock wastewater from the dairy, swine and poultry sub-sectors along with the biological (annamox and genetically modified bacteria) and physico-chemical treatment methodologies, and valorisation for the generation of value-added products such as bioplastics, biofertilizers, biohydrogen and microalgal-microbial fuel cells. Additionally, future perspectives for efficient and sustainable wastewater treatment are contemplated.

Recent Advances in Responsive Membrane Functionalization Approaches and Applications

In recent years, significant advances have been made in the field of functionalized membranes. With the functionalization using various materials, such as polymers and enzymes, membranes can exhibit property changes in response to an environmental stimulation, such as heat, light, ionic strength, or pH. The resulting responsive nature allows for an increased breadth of membrane uses, due to the developed functionalization properties, such as smart-gating filtration for size-selective water contaminant removal, self-cleaning antifouling surfaces, increased scalability options, and highly sensitive molecular detection. In this review, new advances in both fabrication and applications of functionalized membranes are reported and summarized, including temperature-responsive, pH-responsive, light-responsive, enzyme-functionalized, and two-dimensional material-functionalized membranes. Specific emphasis was given to the most recent technological improvements, current limitations, advances in characterization techniques, and future directions for the field of functionalized membranes.

Precipitation-based microscale enzyme reactors coupled with porous and adhesive elastomer for effective bacterial decontamination and membrane antifouling on-demand

Bacterial contamination of water environments can cause various troubles in various areas. As one of potential solutions, we develop enzyme-immobilized elastomer, and demonstrate the uses of enzyme reactions on-demand for effective microbial decontamination and antifouling. Asymmetrically-structured elastomer is prepared by combining two polydimethylsiloxane (PDMS) layers with different degrees of crosslinking: highly-crosslinked and lightly-crosslinked PDMS layers. At the surface of highly-crosslinked PDMS layer, porous structure with average diameter of 842 nm is formed by dissolving pre-packed and entrapped latex beads. Lightly-crosslinked PDMS on the other side, due to its adhesive nature, enables iterative attachments on various materials under either dry or wet condition. Glucose oxidase (GOx) is immobilized by using the pores at the surface of highly-crosslinked PDMS matrix via a ship-in-a-bottle protocol of precipitation-based microscale enzyme reactor (p-MER), which consists of GOx adsorption, precipitation and chemical crosslinking (EAPC). As a result, crosslinked enzyme aggregates (CLEAs) of GOx not only are well entrapped within many pores of highly-crosslinked PDMS layer (ship-in-bottle) but also cover the external surface of matrix, both of which are well connected together. Highly-interconnected network of CLEAs themselves effectively prevents enzyme leaching, which shows the 25% residual activity of GOx under shaking at 200 rpm for 156 days after 48% initial drop of loosely-bound p-MER after 4 days. In presence of glucose, the underwater attachment of biocatalytic elastomer demonstrates the generation of hydrogen peroxide via p-MER-catalyzed glucose oxidation, exhibiting effective biocidal activities against both gram-positive S. aureus and gram-negative E. coli. Adhesion-induced GOx-catalyzed reaction also alleviates the biofouling of membrane, suggesting its extendibility to various engineering systems being suffered by biofouling. This study of biocatalytic elastomer has demonstrated its new opportunities for the facile and on-demand enzyme-catalyzed reactions in various environmental applications, such as bactericidal treatment, water treatment/purification, and pollutant degradation.

Recent advances in carbon-based nanomaterials for combating bacterial biofilm-associated infections

The prevalence of bacterial pathogens among humans has increased rapidly and poses a great threat to health. Two-thirds of bacterial infections are associated with biofilms. Recently, nanomaterials have emerged as anti-biofilm agents due to their enormous potential for combating biofilm-associated infections and infectious disease management. Among these, relatively high biocompatibility and unique physicochemical properties of carbon-based nanomaterials (CBNs) have attracted wide attention. This review presented the current advances in anti-biofilm CBNs. Different kinds of CBNs and their physicochemical characteristics were introduced first. Then, the various potential mechanisms underlying the action of anti-biofilm CBNs during different stages were discussed, including anti-biofouling activity, inhibition of quorum sensing, photothermal/photocatalytic inactivation, oxidative stress, and electrostatic and hydrophobic interactions. In particular, the review focused on the pivotal role played by CBNs as anti-biofilm agents and delivery vehicles. Finally, it described the challenges and outlook for the development of more efficient and bio-safer anti-biofilm CBNs.

Insights into the impact of polydopamine modification on permeability and anti-fouling performance of forward osmosis membrane

Forward osmosis (FO) has drawn wide attention as a promising method to address world-wide water crisis due to the advantages of low-energy consumption and easy separation operation. Unfortunately, the trade-off between permeability and selectivity as well as membrane fouling hindered the application of forward osmosis. Surface modification is a feasible method to address these issues. However, there is a lack of systematic evaluation about the effect of modification position on FO performance due to the asymmetric structure of thin film composite (TFC) FO membrane. To provide new insights into the design of FO membrane with satisfied permeability and fouling resistance, novel TFC FO membranes were fabricated by introducing polydopamine (PDA) on the support layer (TFC-I) or active layer (TFC-S), respectively. The surface morphology, chemical composition and wettability of the fabricated membrane were studied. It was found that the surface wettability of the modified membrane was improved greatly compared to pristine TFC membrane (TFC-C). Moreover, TFC-S membrane displayed a rougher surface than that of TFC-I membrane. As a result, a superior TFC-S membrane with a water flux of 60.95 ± 3.15 L m^-2h^-1 in AL-DS mode was obtained, which was 72.61% and 17.87% higher than that of TFC-C and TFC-I membrane, respectively. In addition, the TFC-S membrane also presented an excellent fouling resistance and membrane regeneration performance during the three organic fouling cycle experiments. The results indicated that the introduction of PDA as a surface coating for TFC membranes modification guaranteed the high-performance and fouling resistance. Especially, the PDA coating on the support layer surface resulted in an enhancement in permeability, while both the permeability and anti-fouling performance were significantly improved with the PDA coating on the polyamide active layer surface. This study provides new insights into the development of modification TFC-FO membranes for practical applications in water treatment.

Biocatalytic membranes for combating the challenges of membrane fouling and micropollutants in water purification: A review

Over the last few years, the list of water contaminants has grown tremendously due to many anthropogenic activities. Various conventional technologies are available for water and wastewater treatment. However, micropollutants of emerging concern (MEC) are posing a great threat due to their activity at trace concentration and poor removal efficiency by the conventional treatment processes. Advanced technology like membrane technology can remove MEC to some extent. However, issues like the different chemical properties of MEC, selectivity, and fouling of membranes can affect the removal efficiency. Moreover, the concentrate from the membrane filtration may need further treatment. Enzymatic degradation of pollutants and foulants is one of the green approaches for removing various contaminants from the water as well as mitigating membrane fouling. Biocatalytic membranes (BCMs), in which enzymes are immobilized on membranes, combines the advantages of membrane separation and enzymatic degradation. This review article discussed various commonly used enzymes in BCMs for removing MEC and fouling. The majorly used enzymes were oxidoreductases and hydrolases for removing MEC, antifouling, and self-cleaning ability. The various BCM synthesis processes based on entrapment, crosslinking, and binding have been summarized, along with the effects of the addition of the nanoparticles on the performances of the BCMs. The scale-up, commercial viability, challenges, and future direction for improving BCMs have been discussed and shown bright possibilities for these new generation membranes.

Temperature and immigration effects on quorum sensing in the biofilms of anaerobic membrane bioreactors

Quorum sensing (QS), a microbial communication mechanism modulated by acyl homoserine lactone (AHL) molecules impacts biofilm formation in bioreactors. This study investigated the effects of temperature and immigration on AHL levels and biofouling in anaerobic membrane bioreactors. The hypothesis was that the immigrant microbial community would increase the AHL-mediated QS, thus stimulating biofouling and that low temperatures would exacerbate this. We observed that presence of immigrants, especially when exposed to low temperatures indeed increased AHL concentrations and fouling in the biofilms on the membranes. At low temperature, the concentrations of the main AHLs observed, N-dodecanoyl-L-homoserine lactone and N-decanoyl-L-homoserine lactone, were significantly higher in the biofilms than in the sludge and correlated significantly with the abundance of immigrant bacteria. Apparently low temperature, immigration and denser community structure in the biofilm stressed the communities, triggering AHL production and excretion. These insights into the social behaviour of reactor communities responding to low temperature and influx of immigrants have implications for biofouling control in bioreactors.

Anti-biofouling efficacy of three home and personal care product preservatives: Pseudomonas aeruginosa biofilm inhibition and prevention

Due to increasing water scarcity, it is essential to determine cost-effective and efficient methods of producing potable water, especially ones that utilize non-traditional sources. Although reverse osmosis (RO) shows promise as a key-player in mitigating water scarcity, it is limited by biofouling. It is therefore integral to identify effective antifoulants that also do not damage the membrane, cause resistance, or negatively impact human health and the environment. Potential antifoulants include preservatives used in home and personal care products. It is hypothesized that safer preservatives can be applied to RO systems to remove or prevent biofouling. Three preservatives including methylisothiazolinone (MIT), phenoxyethanol (PE), and sodium benzoate (SB) were tested via antimicrobial susceptibility tests against P. aeruginosa biofilms grown in 96-well plates to investigate both biofilm prevention and biofilm removal. Data were collected in the form of minimum biofilm inhibitory concentration (MBIC) and minimum biofilm eradication concentration (MBEC), respectively. MIT was the most effective of the three preservatives but also poses the highest hazard to human health and the environment. Due to efficacy and safety concerns, MIT, PE, and SB are not the final solution; however, a process was demonstrated for determining the efficacy of novel, safer antifoulants. Ultimately, further investigations into safer antifoulants, paired with a greater understanding of biofilm removal and prevention doses will help make RO a better solution for water scarcity.

Biological-based control strategies for MBR membrane biofouling: a review

Membrane bioreactor (MBR) technology has been paid extensive attention for wastewater treatment because of its advantages of high effluent quality and minimized occupation space and sludge production. However, the membrane fouling is always an inevitable problem, which causes high operation and maintenance costs and prevents the wide use of MBR technology. The membrane biofouling is the most complicated and has relatively slow progress among all types of fouling. In recent years, many membrane biofouling control methods have been developed. Different from the physical or chemical methods, the biological-based strategies are not only more effective for membrane biofouling control, but also milder and more environment-friendly and, therefore, have been increasingly employed. This paper mainly focuses on the mechanism, unique advantages and development of biological-based control strategies for MBR membrane biofouling such as quorum quenching, uncoupling, flocculants and so on. The paper summarizes the up-to-date development of membrane biofouling control strategies, emphasizes the advantages and promising potential of biological-based ones, and points out the direction for future studies.

Quorum Quenching Mediated Bacteria Interruption as a Probable Strategy for Drinking Water Treatment against Bacterial Pollution

Pseudomonas aeruginosa in water lines may cause bacteria pollution indrinking fountains that could affect the quality of potable water, thus posing a risk to public health. A clean and efficient strategy is required for drinking water treatment for food safety. In this study, an AiiA-homologous lactonase was cloned from a deep-sea probiotics Bacillus velezensis (DH82 strain), and was heterologously expressed so that the capacity of the enzyme on the N-acyl-L-homoserine lactone (AHL)-degrading, effect of bacterial proliferation, biofilm formation and toxic factors release, and membrane pollution from P. aeruginosa could each be investigated to analyze the effect of the enzyme on water treatment. The enzyme effectively degraded the signal molecules of P. aeruginosa (C6-HSL and C12-HSL), inhibited early proliferation and biofilm formation, significantly reduced toxic products (pyocyanin and rhamnolipid), and inhibited bacterial fouling on the filter membrane, which prevented the secondary contamination of P. aeruginosa in drinking water. The findings demonstrated that the quorum quenching enzyme from probiotics could prevent bacteria pollution and improve potable water quality, and that the enzyme treatment could be used as a probable strategy for drinking water treatment.

Biocatalytic membrane: Go far beyond enzyme immobilization

Biocatalytic membrane takes advantages of reaction-separation integration as well as enzyme immobilization, which has attracted increasing attentions in online detection and biomanufacturing. However, the high preparation cost, inferior comprehensive performance, and low stability limit its applications. Thus, besides enzyme immobilization, more efforts should be made in biocatalytic membrane configuration design for a specific application to enhance the synergistic effect of reaction and separation and improve its operating stability. This review summarized the recent progress on biocatalytic membrane preparation, discussed different membrane configurations for various applications, finally proposed several challenges and possible solutions, which provided directions and guides for the development and industrialization of biocatalytic membrane.

Saline Environments as a Source of Potential Quorum Sensing Disruptors to Control Bacterial Infections: A Review

Saline environments, such as marine and hypersaline habitats, are widely distributed around the world. They include sea waters, saline lakes, solar salterns, or hypersaline soils. The bacteria that live in these habitats produce and develop unique bioactive molecules and physiological pathways to cope with the stress conditions generated by these environments. They have been described to produce compounds with properties that differ from those found in non-saline habitats. In the last decades, the ability to disrupt quorum-sensing (QS) intercellular communication systems has been identified in many marine organisms, including bacteria. The two main mechanisms of QS interference, i.e., quorum sensing inhibition (QSI) and quorum quenching (QQ), appear to be a more frequent phenomenon in marine aquatic environments than in soils. However, data concerning bacteria from hypersaline habitats is scarce. Salt-tolerant QSI compounds and QQ enzymes may be of interest to interfere with QS-regulated bacterial functions, including virulence, in sectors such as aquaculture or agriculture where salinity is a serious environmental issue. This review provides a global overview of the main works related to QS interruption in saline environments as well as the derived biotechnological applications.

Tyrosinase-immobilized CNT based biosensor for highly-sensitive detection of phenolic compounds

Highly sensitive phenol biosensor was developed by using well-dispersed carbon nanotubes (CNTs) in enzyme solution and adding CNTs in enzyme electrodes. First, the intact CNTs were dispersed in aqueous tyrosinase (TYR) solution, and TYR molecules were precipitated and crosslinked to prepare the sample of enzyme adsorption, precipitation and crosslinking (EAPC). EAPC exhibited 10.5- and 5.4-fold higher TYR activity per mg of CNTs as compared to enzyme adsorption (EA) and enzyme adsorption/crosslinking (EAC), respectively. EAPC retained 29% of its initial activity after incubation at 40 °C for 128 h, while EA and EAC showed no residual activities, respectively. In biosensing a model phenolic compound of catechol, the sensitivities of EA, EAC and EAPC electrodes on glassy carbon electrode (GCE) were 34, 281 and 675 µA/mM/cm², respectively. When 90 w/w% CNTs were added to the enzyme electrodes, the sensitivities of EA, EAC, and EAPC electrodes were 146, 427, and 1160 µA/mM/cm², respectively, and the EAPC electrode showed a 2.3-fold increase in sensitivity upon CNT addition. Catechol and phenol could also be detected by EAPC on the screen-printed electrode (SPE), with sensitivities of 1340 and 1170 µA/mM/cm², respectively. The sensitivity of EAPC-SPE for phenol detection in the effluent from real municipal wastewater treatment plant was 1100 µA/mM/cm². The sensitivity of EAPC-SPE retained 74% of its initial sensitivity after incubation at 40 °C for 12 h. The combination of EAPC immobilization and CNT addition has great potential for application in the development of sensitive enzyme biosensors for various analytes and phenols in water environments.

Quorum sensing and quenching in membrane bioreactors: Opportunities and challenges for biofouling control

Membrane biofouling, due to biofilm growth after planktonic bacteria attachment to a membrane, is a major bottleneck limiting the energy-efficient operation and maintenance of membrane bioreactors (MBRs). Microbial communications, known as quorum sensing (QS), are responsible for this biofouling behavior. Novel strategies for stopping this communication, known as quorum quenching (QQ), appear to be successful for biofouling control in MBRs used for wastewater treatment. This review describes recent information regarding the signal molecules and mechanisms responsible for QS behaviors, promising approaches for QQ (enzymatic, bacterial, fungal, photocatalytic, mimicking, and biostimulating methods), and efficient fabrication and use of QQ media for MBR applications. We discuss the opportunities and challenges of QQ techniques for their further improvement and practical use in MBRs.

Advanced membrane bioreactors systems: New materials and hybrid process design

Membrane bioreactor (MBR) is deemed as one of the most powerful technologies for efficient municipal and industrial wastewater treatment around the world. However, low microbial activity of activated sludge and serious membrane fouling still remain big challenges in worldwide application of MBR technology. Nowadays, more and more progresses on the research and development of advanced MBR with new materials and hybrid process are just on the way. In this paper, an overview on the perspective of high efficient strains applied into MBR for biological activity enhancement and fouling reduction is provided first. Secondly, as emerging fouling control strategy, design and fabrication of novel anti-fouling composited membranes are comprehensively highlighted. Meanwhile, hybrid MBR systems integrated with some novel dynamic membrane modules and/or with other technologies like advanced oxidation processes (AOPs) are introduced and compared. Finally, the challenges and opportunities of advanced MBRs combined with bioenergy production in wastewater treatment are discussed.