Cross-linked GO membranes assembled with GO nanosheets of differently sized lateral dimensions for organic dye and chromium separation

High-Performance Inorganic Nanofiltration Membranes Based on Large-Size Layered Titanate Nanosheets

Layered titanate nanosheets (HT-ns) are potential two-dimensional materials and have wide applications due to their unique structure and low cost. In this study, the HT-ns with different lateral sizes were successfully prepared by exfoliating HT crystals with different lateral sizes, which were prepared by the flux method and ion-exchange reaction. The HT-ns were used to fabricate inorganic nanofiltration membranes by restacking the nanosheets on a porous substrate. The effects of the lateral size of HT-ns on the solute rejection performance and nanostructure of HT-ns membranes (HT-Ms), as well as the effect of surface modification of the substrate on HT-M stability, were investigated. The negatively charged substrate surface was changed to a positively charged surface by surface modification to enhance the bonding between the substrate and HT-ns, which improved the HT-M stability. A series of large-area ultrahydrophilic HT-Ms were fabricated by a facile dry deposition method on surface-modified substrates using the HT-ns with different lateral sizes. The rejection rates for inorganic salts and organic dyes increased with the increase in the lateral size of HT-ns used in HT-M fabrication, and a rejection rate of 99.8% was achieved for rhodamine B. A separation mechanism for HT-Ms was proposed to explain the separation performance, which is also suitable for other metal oxide nanosheet nanofiltration membranes.

Halogen-functionalized covalent organic frameworks for photocatalytic Cr(VI) reduction under visible light

Covalent organic frameworks (COFs) are a type of novel organic catalysts which show great potential in the treatment of environmental contaminations. Herein, we synthesized three isoreticular halogen-functionalized (F, Cl and Br) porphyrin COFs for visible-light (420 nm ≤ λ ≤ 780 nm) photocatalytic reduction of Cr(VI) to Cr(III). Halogen substituents with tunable electronegativity can regulate the band structure and modulate the charge carrier kinetics of COFs. In the absence of any sacrificial reagent, the isoreticular COFs exhibited good photocatalytic reduction activity of Cr(VI). Particularly, the TAPP-2F showed nearly 100 % conversion efficiency and the highest reaction rate constants (k) on account of the strong electronegativity of F substituent. Experimental results and theoretical calculations showed that the conduction band (CB) potentials of COFs became more negative and charge carrier separation increased with the enhancement of electronegativity (Br < Cl < F), which could provide sufficient driving force for the photoreduction of Cr(VI) to Cr(III). The halogen substituents strategy for regulating the electronic structure of COFs can provide opportunities for designing efficient photocatalysts for environmental remediation. Meanwhile, the mechanistic insights reported in this study help to understand the photocatalytic degradation pathways of heavy metals.

Fabrication of eco-friendly nanocellulose-chitosan-calcium phosphate ternary nanocomposite for wastewater remediation

Nanocomposites have emerged as promising materials for pollutant removal due to their unique properties. However, conventional synthesis methods often involve toxic solvents or expensive materials. In this study, we present a novel ternary nanocomposite synthesized via a simple, cost-effective vacuum filtration method. The composite consists of calcium phosphate (CaP), biowaste-derived nanocellulose (diameter <50 nm) (NC), and chitosan (CH). The nanocomposite exhibited exceptional pollutant removal capabilities due to the hybrid approach of combining adsorption and size exclusion that widens and accelerates pollutant removal. When tested with synthetic wastewater containing 10 ppm of Ni ions and 10 ppm of Congo red (CR) dye, it achieved impressive removal rates of 98.7% for Ni ions and 100% for CR dye. Moreover, the nanocomposite effectively removed heavy metals such as Cd, Ag, Al, Fe, Hg, Mo, Li, and Se at 100%, and Ba, Be, P, and Zn at 80%, 92%, 87%, and 97%, respectively, from real-world municipal wastewater. Importantly, this green nanocomposite membrane was synthesized without the use of harmful chemicals or complex modifications and operated at a high flux rate of 146 L/m2.h.MPa. Its outstanding performance highlights its potential for sustainable pollutant removal applications.

Membranes Based on Aminated Graphene Oxide with High Selectivity Toward Organic Substances

In this work, membranes based on graphene oxide, modified with oleylamine, have been prepared by a simple wet chemistry protocol without the use of complex equipment, elevated temperature, and additional reagents. The membrane material was characterized by a set of physicochemical methods: thermogravimetric analysis, Fourier transform infrared spectroscopy, X-ray diffractometry, and X-ray photoelectron spectroscopy. The prepared membranes are stable in both aqueous and organic media. The membranes have a high flux for organic substances and do not permeate water at room temperature and atmospheric pressure. The selectivity of the membranes toward organic substances increases with their thickness. The highest flux among the tested organic liquids is registered for methanol. The membranes have high selectivity toward ethanol/1-butanol and acetone/1-butanol pairs, which opens up the possibility of separating actual industrial mixtures. The membrane retains 90% of methylene blue from the alcohol solution. Our work expands the possibilities of using modified GO-based membranes in purification and filtration technologies.

Advances in Two-Dimensional Ion-Selective Membranes: Bridging Nanoscale Insights to Industrial-Scale Salinity Gradient Energy Harvesting

Salinity gradient energy, often referred to as the Gibbs free energy difference between saltwater and freshwater, is recognized as "blue energy" due to its inherent cleanliness, renewability, and continuous availability. Reverse electrodialysis (RED), relying on ion-selective membranes, stands as one of the most prevalent and promising methods for harnessing salinity gradient energy to generate electricity. Nevertheless, conventional RED membranes face challenges such as insufficient ion selectivity and transport rates and the difficulty of achieving the minimum commercial energy density threshold of 5 W/m2. In contrast, two-dimensional nanostructured materials, featuring nanoscale channels and abundant functional groups, offer a breakthrough by facilitating rapid ion transport and heightened selectivity. This comprehensive review delves into the mechanisms of osmotic power generation within a single nanopore and nanochannel, exploring optimal nanopore dimensions and nanochannel lengths. We subsequently examine the current landscape of power generation using two-dimensional nanostructured materials in laboratory-scale settings across various test areas. Furthermore, we address the notable decline in power density observed as test areas expand and propose essential criteria for the industrialization of two-dimensional ion-selective membranes. The review concludes with a forward-looking perspective, outlining future research directions, including scalable membrane fabrication, enhanced environmental adaptability, and integration into multiple industries. This review aims to bridge the gap between previous laboratory-scale investigations of two-dimensional ion-selective membranes in salinity gradient energy conversion and their potential large-scale industrial applications.

Defect Engineering in GO Membranes - Tailoring Size and Oxidation Degree of Nanosheet for Enhanced Pore Channels

Graphene Oxide (GO) membrane has been extensively applied in the field of water purification and membrane separation processes. While the solute molecule transport in GO membranes encompasses interlayer channels, edge defects, and in-plane crack-like holes, the significance of edge defects or crack-like pores in ultrathin membranes is often overlooked. In our study, we focused on the construction of short-range channel GO membranes with varied defect structures by modulating the transverse size of the porous nanosheets. GO nanosheets with different sizes were procured through high-energy γ-irradiation combined with centrifugation. Notably, the large-sized porous GO nanosheets (L-pGO) exhibit a consistent structure, and numerous in-plane defects. In contrast, the smaller counterparts (S-pGO) present a fewer in-plane defects. The performance metrics revealed that L-pGO exhibited a water flux of 849.25 L m-2  h-1  bar-1 , while S-pGO demonstrated nearly 100 % dye rejection capacity. These findings underscore the potential of defect engineering as a powerful strategy to enhance the efficiency of two-dimensional membranes.

The ultramicropore biochar derived from waste distiller's grains for wet-process phosphoric acid purification: Removal performance and mechanisms of Cr(VI)

Solid waste and heavy metal pollution are long-term and challenging subjects in the field of environmental engineering. In this study, we propose a sustainable approach to "treating waste with waste" by utilizing the ultramicropore biochar derived from solid waste distiller's grains as a means to remove Cr(VI) from simulated wastewater and wet phosphoric acid. The biochar prepared in this research exhibit extremely high specific surface areas (up to 2973 m2/g) and a well-developed pore structure, resulting in a maximum Cr(VI) adsorption capacity of 426.0 mg/g and over 99% removal efficiency of Cr(VI). Furthermore, the adsorbent can be reused for up to eight cycles without significant reduction in its Cr(VI) adsorption performance. Mechanistic investigations suggest that the exceptional Cr(VI) adsorption capacity can be attributed to the synergistic effect of electrostatic interaction and reduction adsorption. This study offers an alternative approach for the resource utilization of solid waste distiller's grains, and the prepared biochar holds promise for the removal of Cr(VI) from wastewater and wet-process phosphoric acid.

Tailored ethylenediamine-functionalized graphene oxide membrane on kaolin hollow fibers for pectin concentration

Pectin is a valuable product that can be extracted from waste fruit peels. Here we propose the use of graphene oxide (GO)-based membranes for pectin concentration. The synthesized GO was functionalized with ethylenediamine (EDA) to molecularly design the GO framework. Kaolin hollow fibers with asymmetric pore distribution were used as a porous substrate for GO/EDA deposition. A GO/EDA layer with a thickness of 2.86 ± 0.24 μm was assembled on the substrate by the simple vacuum-assisted deposition method. After GO/EDA depositions, the water permeance of the pristine kaolin hollow fibers reduced from 8.46 ± 0.17 to 0.52 ± 0.03 L h-1·m-2·kPa-1. A pectin aqueous extract from orange peels was filtered at cross-flow mode through the prepared membranes and the steady-state fluxes through pristine and GO/EDA-coated hollow fibers were 56 ± 2 and 20 ± 3 L h-1 m-2, respectively. The GO/EDA-coated membrane presented greater pectin selectivity than the pristine hollow fiber. The GO/EDA-coated hollow fiber concentrated the galacturonic acid, phenolic, and methoxyl contents in 19.5, 17.4, and 29.2 %, respectively. Thus, filtration through the GO/EDA-based membrane is a suitable alternative for pectin concentration.

Simultaneous Regulation of Surface Properties and Microstructure of Graphene Oxide Membranes for Enhanced Nanofiltration Performance

The surface properties and microstructure of graphene oxide (GO)-based membranes are both crucial for enhanced nanofiltration performance. Herein, a GO nanofiltration membrane is fabricated with regulatable surface properties and microstructure via a facile two-step impregnation in KOH and following HCl aqueous solutions. The type and number of oxygen-containing groups in GO membranes change with fewer C-O-C/C-OH and C═O but more COOH groups, and they are readily regulated by alkaline treatment time, which enables enhanced surface hydrophilicity and larger surface ζ potentials. Meanwhile, a few tiny defects are present in the GO sheets, which could increase the number of pores and decrease the length of water nanochannels. Such surface properties and microstructure together determine the excellent nanofiltration performance of the GO membranes with fast and selective water permeation, e.g., ∼99.5% rejection toward CBB G250 and flux of 56.9 ± 1.0 L m-2 h-1. This work provides insights into the design of high-performance two-dimensional laminar membranes.

A Facile Way to Fabricate GO-EDA/Al2O3 Tubular Nanofiltration Membranes with Enhanced Desalination Stability via Fine-Tuning the pH of the Membrane-Forming Suspensions

Pristine graphene oxide (GO)-based membranes have proven promising for molecular and ion separation owing to efficient molecular transport nanochannels, but their separation ability in an aqueous environment is limited by the natural swelling tendency of GO. To obtain a novel membrane with anti-swelling behavior and remarkable desalination capability, we used the Al₂O₃ tubular membrane with an average pore size of 20 nm as the substrate and fabricated several GO nanofiltration ceramic membranes with different interlayer structures and surface charges by fine-tuning the pH of the GO-EDA membrane-forming suspension (pH = 7, 9, 11). The resultant membranes could maintain desalination stability, whether immersed in water for 680 h or operated under a high-pressure environment. When the pH of the membrane-forming suspension was 11, the prepared GE-11 membrane showed a rejection of 91.5% (measured at 5 bar) towards 1 mM Na₂SO₄ after soaking in water for 680 h. An increase in the transmembrane pressure to 20 bar resulted in an increase in the rejection towards the 1 mM Na₂SO₄ solution to 96.3%, and an increase in the permeance to 3.7 L·m^-2·h^-1·bar^-1. The proposed strategy in varying charge repulsion is beneficial to the future development of GO-derived nanofiltration ceramic membranes.

A critical review on graphene oxide membrane for industrial wastewater treatment

An important way to promote the environmental industry's goal of carbon reduction is to promote the recycling of resources. Membrane separation technology has unique advantages in resource recovery and advanced treatment of industrial wastewater. However, the great promise of traditional organic membrane is hampered by challenges associated with organic solvent tolerance, lack of oxidation resistance, and serious membrane fouling control. Moreover, the high concentrations of organic matter and inorganic salts in the membrane filtration concentrate also hinder the wider application of the membrane separation technology. The emerging cost-effective graphene oxide (GO)-based membrane with excellent resistance to organic solvents and oxidants, more hydrophilicity, lower membrane fouling, better separation performance has been expected to contribute more in industrial wastewater treatment. Herein, we provide comprehensive insights into the preparation and characteristic of GO membranes, as well as current research status and problems related to its future application in industrial wastewater treatment. Finally, concluding remarks and future perspectives have been deduced and recommended for the GO membrane separation technology application for industrial wastewater treatment, which leads to realizing sustainable wastewater recycling and a nearly "zero discharge" water treatment process.

Green Methods for the Fabrication of Graphene Oxide Membranes: From Graphite to Membranes

Graphene oxide (GO) has shown great potential as a membrane material due to its unique properties, including high mechanical strength, excellent thermal stability, versatility, tunability, and outperforming molecular sieving capabilities. GO membranes can be used in a wide range of applications, such as water treatment, gas separation, and biological applications. However, the large-scale production of GO membranes currently relies on energy-intensive chemical methods that use hazardous chemicals, leading to safety and environmental concerns. Therefore, more sustainable and greener approaches to GO membrane production are needed. In this review, several strategies proposed so far are analyzed, including a discussion on the use of eco-friendly solvents, green reducing agents, and alternative fabrication techniques, both for the preparation of the GO powders and their assembly in membrane form. The characteristics of these approaches aiming to reduce the environmental impact of GO membrane production while maintaining the performance, functionality, and scalability of the membrane are evaluated. In this context, the purpose of this work is to shed light on green and sustainable routes for GO membranes' production. Indeed, the development of green approaches for GO membrane production is crucial to ensure its sustainability and promote its widespread use in various industrial application fields.

Membranes Coated with Graphene-Based Materials: A Review

Graphene is a popular material with outstanding properties due to its single layer. Graphene and its oxide have been put to the test as nano-sized building components for separation membranes with distinctive structures and adjustable physicochemical attributes. Graphene-based membranes have exhibited excellent water and gas purification abilities, which have garnered the spotlight over the past decade. This work aims to examine the most recent science and engineering cutting-edge advances of graphene-based membranes in regard to design, production and use. Additional effort will be directed towards the breakthroughs in synthesizing graphene and its composites to create various forms of membranes, such as nanoporous layers, laminates and graphene-based compounds. Their efficiency in separating and decontaminating water via different techniques such as cross-linking, layer by layer and coating will also be explored. This review intends to offer comprehensive, up-to-date information that will be useful to scientists of multiple disciplines interested in graphene-based membranes.

Cross-linked laminar graphene oxide membranes for wastewater treatment and desalination: A review

Two-dimensional (2D) lamellar graphene oxide (GO) membranes are emerging as attractive materials for molecular separation in water treatment because of their single atomic thickness, excellent hydrophilicity, large specific surface areas, and controllable properties. To yet, commercialization of GO laminar membranes has been hindered by their propensity to swell in hydrated conditions. Thus, chemical crosslinking of GO sheets with the polymer matrix is used to improve GO membrane hydration stability. This review focuses on pertinent themes such as how chemical crosslinking improves the hydration stability, separation performance, and antifouling properties of GO membranes.

Tuneable molecular selective boron nitride nanosheet ultrafiltration lamellar membrane for dye exclusion to remediate the environment

Smart tuning of the membrane's porous nanostructures offers an effective strategy for creating state-of-the-art, high-performance separation membranes. In aqueous solution, polyethylene glycol (PEG) grafted boron nitride PEG_X-g-(f-BN) nanosheets exhibit high permeance and excellent molecular sieving. The molecular selectivity of the PEG_X-g-(f-BN) lamellar membrane is controlled by the nanopores, which can be tuned by modulating the interplanar spacing between the nanosheets. Herein, the interplanar spacing of h-BN nanosheets is enhanced in the range of 0.334-0.348 nm through grafting different molecular weight PEG. Moreover, the grafted PEG instigates a synergistic effect on the nanosheets in two ways. Firstly, through PEG intercalation, the interlayer spacing of the (002) plane could be adjusted without significant deterioration to the hexagonal crystallographic structure. Secondly, intercalated PEG in BN nanosheets reflects in terms of improved h-BN wettability through transformation to hydrophilic surface characteristics (small contact angle of 36-39°). The fabricated PEG_X-g-(f-BN) lamellar membrane acquires stable and interconnected nanopores and nanochannels with an average pore diameter of 1.36-2.19 nm. Permeance-exclusion trade-off manipulation through methodical approaches of PEG_X-g-(f-BN) decoration thickness and interplanar spacing is exploited to build a better understanding of water transport behavior. PEG_X-g-(f-BN) lamellar membranes show unprecedented permeance of ∼1253 L m^-2 h^-1 bar^-1 with a steady methyl blue (MB) exclusion of 98.9% even in different pH conditions.

Improving stability and separation performance of graphene oxide/graphene nanofiltration membranes by adjusting the laminated regularity of stacking-sheets

The laminated graphene oxide (GO) membranes are promising alternatives in the field of nanofiltration due to their unique stacked interlayer structure and controllable molecular transport channels. However, it is still challenging to obtain satisfactory physical stability and separation performance to meet its practical application. In this study, a novel GO/Gr (graphene) nanofiltration membrane with high stability was engineered by post-hot-pressure treatment, following forward pressure filtration. The impact of GO/Gr loading ratio of the composites nanofiltration membranes for the permeability, selectivity, hydrophilicity and physical stability was investigated. The GO/Gr nanofiltration membranes exhibited high stability and separation performance because of the enhanced regularity and smoothness of the overall stacking layers. It was demonstrated that the satisfactory permeability (12.8-20 L·m^-2·h^-1) of GO/Gr nanofiltration membranes could be achieved. Compared with the pure GO membranes, GO/Gr-0.5 membranes exhibited a higher Na₂SO₄, NaCl, MgCl₂, and MgSO₄ rejection rate of approximately 78.3%, 51.2%, 34.5% and 32.6%, respectively. Meanwhile, the rejection rate (99.5%, 99.9%, 97.3% and 98.6%) of composite membranes for Methylene blue, Congo red, Rhodamine B and Methyl orange could be achieved. This facile way reveals the potential of stacked GO/Gr membranes in developing GO-based nanofiltration membranes.

The role of lateral size of MXene nanosheets in membrane filtration of dyeing wastewater: Membrane characteristic and performance

New two-dimensional (2D) material MXene based lamellar membranes constructed from 2D MXene nanosheets have shown promising potential for water treatment with excellent selective property and high water flux. However, the effect of lateral size of MXene nanosheets on the membrane property and performance was rarely considered. Herein, the MXene nanosheets with different lateral size (552.3 nm, 397.5 nm and 281.8 nm) segregated via adjusting centrifugation conditions were used to prepare MXene membranes. XRD and cross-sectional SEM images confirmed that the resulting MXene membranes had the similar d-spacing and thickness. The MXene membrane with the smallest lateral size, MXene_(S)-M, owned the largest surface roughness with reduced surface hydrophilicity. Lateral size determined mass transfer pathway and transfer resistance, which consequently influenced the water permeance and rejection of MXene membranes for dyeing wastewater treatment. MXene_(S)-M with the shortest mass transfer pathway had the high water permeance while the MXene membrane with larger lateral size (MXene_(L)-M and MXene_(M)-M), possessing longer mass transport pathway, promoted high dye rejection.

Novel graphene oxide/polymer composite membranes for the food industry: structures, mechanisms and recent applications

The membrane can not only be used as food packaging, but also for the separation, fractionation and recovery of food ingredients. Graphene oxide (GO) sheets are a two-dimensional (2 D) material with a unique structure that exhibit excellent mechanical properties, biocompatibility, and flexibility. The corporation of polymer matrix membrane with GO can significantly improve the permeability, selectivity, and antibacterial activity. In this review, the chemical structures of GO, GO membranes and GO/polymer composite membranes are introduced, the permeation mechanisms of molecules through the membranes are discussed and key factors affecting the permeability are presented in detail. In addition, recent applications in the food industry for filtration, bioreactions and active food packaging are analyzed, and limitations and future trends of GO membranes development are also highlighted. GO/polymer composite membranes exhibit excellent permeability, selectivity and strong barrier properties against bacterial and gas permeation. However, current food material filtration and packaging applications of GO/polymer composite membranes are still in the laboratory stage. Future work can focus on the development of large scale uniformly sized GO production, the homogeneous distribution and tight combination of GO in polymer matrixes, the sensing function of GO in packaging, and the verification method of GO toxicology.

D-spacing controllable GO membrane intercalated by sodium tetraborate pentahydrate for dye contamination wastewater treatment

Sodium tetraborate pentahydrate (STB) was intercalated into graphene oxide (GO) nanosheets to form a nanocomposite (STB@GO). Subsequently, it was self-assembled on a substrate membrane to prepare STB@GO nanofiltration membrane. The properties of the STB@GO powder samples and the nanofiltration membrane were studied using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), contact angle (CA), and zeta potential. When the STB concentration was 1.0 g/L in the cross-linking reaction, the membrane was described as the STB₂@GO membrane and exhibited a large interlayer space (d-spacing = 1.347 nm), high hydrophilicity (CA = 22.2°), and high negative potential (zeta = -18.0 mV). Meanwhile, the pure water flux of the membrane was significantly increased by 56.60% than that of the GO membrane. In addition, the STB₂@GO membrane exhibited a favorable capability for dye rejection,98.52% for Evans blue (EB), 99.26% for Victoria blue B (VB), 91.94% for Alizarin yellow (AY), and 93.21% for Neutral red (NR). Furthermore, the STB₂@GO membrane performed better in dye separation under various types and concentrations of dye, pH values, and ions in solution. Thus, this study provides a promising method for preparing laminated GO nanofiltration membranes for dye wastewater treatment.