Secondary growth of covalent organic frameworks (COFs) on porous substrates for fast desalination

Water desalination and methylene blue dye removal by microalgae-based membrane: performance and mechanisms

The present work describes the preparation of a biocomposite membrane by coating of Scenedesmus sp. microalgae on the surface of stainless steel mesh. The prepared membrane was used for both water desalination and methylene blue dye removal. Some effective parameters on the bioremediation performance such as the number of mesh layers, salt and dye concentrations, and the number of desalination cycles were optimized. Under the optimum conditions, the algae-coated mesh exhibited salt rejection and dye removal of 89.4 ± 1.2% and 97.9 ± 0.6%, respectively. The results confirmed the high stability and reusability of algae-coated mesh after 20 cycles of the desalination process. The prepared membrane showed outstanding mechanical strength with corrosion resistance and tensile strength of 96.7% and 38.1 MPa, respectively. The algae-coated mesh has the ability to successfully remove salinity agent cations from well water with the yields of above 87.0%. Based on the results, the salt removal was better fitted with Temkin adsorption isotherm, while the methylene blue dye removal was compatible with the Langmuir isotherm model.

Engineering of Covalent Organic Framework Nanosheet Membranes for Fast and Efficient Ion Sieving: Charge-Induced Cation Confined Transport

Artificial membranes with ion-selective nanochannels for high-efficiency mono/divalent ion separation are of great significance in water desalination and lithium-ion extraction, but they remain a great challenge due to the slight physicochemical property differences of various ions. Here, the successful synthesis of two-dimensional TpEBr-based covalent organic framework (COF) nanosheets, and the stacking of them as consecutive membranes for efficient mono/divalent ion separation is reported. The obtained COF nanosheet membranes with intrinsic one-dimensional pores and abundant cationic sites display high permeation rates for monovalent cations (K+, Na+, Li+) of ≈0.1-0.3 mol m-2 h-1, while the value of divalent cations (Ca2+, Mg2+) is two orders of magnitude lower, resulting in an ultrahigh mono/divalent cation separation selectivity up to 130.4, superior to the state-of-the-art ion sieving membranes. Molecular dynamics simulations further confirm that electrostatic interaction controls the confined transport of cations through the cationic COF nanopores, where multivalent cations face i) strong electrostatic repulsion and ii) steric transport hindrance since the large hydrated divalent cations are retarded due to a layer of strongly adsorbed chloride ions at the pore wall, while smaller monovalent cations can swiftly permeate through the nanopores.

Introducing the SNW-1 Covalent Organic Framework to the Polyamide Layer of the TFC-RO Membrane with Enhanced Permeability and Desalination Performance

This study investigates the synthesis and characterization of Schiff base network-1 (SNW-1) covalent organic framework (COF) nanomaterials and their application in the fabrication of thin-film nanocomposite (TFN) membranes. The embedding of SNW-1 COF in reverse osmosis (RO) membranes with a polysulfone (PSf) substrate was done using the interfacial polymerization method. The result of the study demonstrated that the porous and hydrophilic structure of the COF increased the hydrophilic properties of the produced RO membranes. When the COF was embedded with a concentration of 0.02 wt %, the hydrophilicity of the RO membrane was higher than that of the other membranes, with a contact angle value of 45.2°. Pure water flux, saline solution flux, and humic acid (HA)/sodium chloride (NaCl) foulant solution flux were measured to determine the membrane performance, and it was found that as the COF ratio increased, the fluxes increased up to a certain concentration rate. The RO membrane with a SNW-1 concentration of 0.005 wt % had the highest values of pure water flux and saline solution flux with high salt rejection (34.2 and 32.2 LMH, 97.1%, respectively) and was the most resistant membrane against fouling. This study presents the potential of the SNW-1 COF with precise design capabilities and controlled unique properties as an additive for desalination applications.

Aptamer-Conjugated Covalent-Organic Framework Nanochannels for Selective and Sensitive Detection of Aflatoxin B1

Sensitive and selective detection of trace aflatoxin B1 (AFB1) in foods is of great importance to guarantee food safety and quality but still challenging because of its trace amount and the interference from the complex food matrix. Here, we report the integration of aptamer (Apt) and an ordered 2D covalent organic framework (COF) to solid-state anodic aluminum oxide (AAO) nanochannels (Apt/COF/AAO) for selective and sensitive detection of trace AFB1. The high specificity of Apt for AFB1 led to a selective change in the surface charge of Apt/COF/AAO and in turn the current change of the nanochannel, permitting the selective and sensitive determination of trace AFB1 in complex food samples. The developed nanofluidic sensor gave a wide linear range (1-500 pg mL-1), low detection limit (0.11 pg mL-1), and good precision (relative standard deviation of 1.5% for 11 replicate determinations of 100 pg mL-1). In addition, the developed sensor was successfully used for the detection of AFB1 in food samples with the recovery of 86.9%-102.5%. The coupling of Apt-conjugated 2D COF with an AAO nanochannel provides a promising way for sensitive and selective determination of food contaminants in complex samples.

Optimizing selectivity via membrane molecular packing manipulation for simultaneous cation and anion screening

Advancing membranes with enhanced solute-solute selectivity is essential for expanding membrane technology applications, yet it presents a notable challenge. Drawing inspiration from the unparalleled selectivity of biological systems, which benefit from the sophisticated spatial organization of functionalities, we posit that manipulating the arrangement of the membrane's building blocks, an aspect previously given limited attention, can address this challenge. We demonstrate that optimizing the face-to-face orientation of building blocks during the assembly of covalent-organic-framework (COF) membranes improves ion-π interactions with multivalent ions. This optimization leads to extraordinary selectivity in differentiating between monovalent cations and anions from their multivalent counterparts, achieving selectivity factors of 214 for K+/Al3+ and 451 for NO3-/PO43-. Leveraging this attribute, the COF membrane facilitates the direct extraction of NaCl from seawater with a purity of 99.57%. These findings offer an alternative approach for designing highly selective membrane materials, offering promising prospects for advancing membrane-based technologies.

Aminal-Linked Covalent Organic Framework Membranes Achieve Superior Ion Selectivity

High-salinity wastewater treatment is perceived as a global water resource recycling challenge that must be addressed to achieve zero discharge. Monovalent/divalent salt separation using membrane technology provides a promising strategy for sulfate removal from chlor-alkali brine. However, existing desalination membranes often show low water permeance and insufficient ion selectivity. Herein, an aminal-linked covalent organic framework (COF) membrane featuring a regular long-range pore size of 7 Å and achieving superior ion selectivity is reported, in which a uniform COF layer with subnanosized channels is assembled by the chemical splicing of 1,4-phthalaldehyde (TPA)-piperazine (PZ) COF through an amidation reaction with trimesoyl chloride (TMC). The chemically spliced TPA-PZ (sTPA-PZ) membrane maintains an inherent pore structure and exhibits a water permeance of 13.1 L m-2 h-1 bar-1, a Na2SO4 rejection of 99.1%, and a Cl-/SO4 2- separation factor of 66 for mixed-salt separation, which outperforms all state-of-the-art COF-based membranes reported. Furthermore, the single-stage treatment of NaCl/Na2SO4 mixed-salt separation achieves a high NaCl purity of above 95% and a recovery rate of ≈60%, offering great potential for industrial application in monovalent/divalent salt separation and wastewater resource utilization. Therefore, the aminal-linked COF membrane developed in this work provides a new research avenue for designing smart/advanced membrane materials for angstrom-scale separations.

Recent advances of pure/independent covalent organic framework membrane materials: preparation, properties and separation applications

Covalent organic frameworks (COF) are porous crystalline polymers connected by covalent bonds. Due to their inherent high specific surface area, tunable pore size, and good stability, they have attracted extensive attention from researchers. In recent years, COF membrane materials developed rapidly, and a large amount of research work has been presented on the preparation methods, properties, and applications of COF membranes. This review focuses on the research on independent/pure continuous COF membranes. First, based on the membrane formation mechanism, COF membrane preparation methods are categorized into two main groups: bottom-up and top-down. Four methods are presented, namely, solvothermal, interfacial polymerization, steam-assisted conversion, and layer by layer. Then, the aperture, hydrophilicity/hydrophobicity and surface charge properties of COF membranes are summarized and outlined. According to the application directions of gas separation, water treatment, organic solvent nanofiltration, pervaporation and energy, the latest research results of COF membranes are presented. Finally, the challenges and future directions of COF membranes are summarized and an outlook provided. It is hoped that this work will inspire and motivate researchers in related fields.

2D Covalent Organic Framework Membranes for Liquid-Phase Molecular Separations: State of the Field, Common Pitfalls, and Future Opportunities

2D covalent organic frameworks (2D COFs) are attractive candidates for next-generation membranes due to their robust linkages and uniform, tunable pores. Many publications have claimed to achieve selective molecular transport through COF pores, but reported performance metrics for similar networks vary dramatically, and in several cases the reported experiments are inadequate to support such conclusions. These issues require a reevaluation of the literature. Published examples of 2D COF membranes for liquid-phase separations can be broadly divided into two categories, each with common performance characteristics: polycrystalline COF films (most >1 µm thick) and weakly crystalline or amorphous films (most <500 nm thick). Neither category has demonstrated consistent relationships between the designed COF pore structure and separation performance, suggesting that these imperfect materials do not sieve molecules through uniform pores. In this perspective, rigorous practices for evaluating COF membrane structures and separation performance are described, which will facilitate their development toward molecularly precise membranes capable of performing previously unrealized chemical separations. In the absence of this more rigorous standard of proof, reports of COF-based membranes should be treated with skepticism. As methods to control 2D polymerization improve, precise 2D polymer membranes may exhibit exquisite and energy efficient performance relevant for contemporary separation challenges.

Function-Led Design of Covalent-Organic-Framework Membranes for Precise Ion Separation

Insufficient access to clean water and resources has emerged as one of the most pressing issues affecting people globally. Membrane-based ion separation has become a focal point of research for the generation of fresh water and the extraction of energy elements. This Review encapsulates recent advancements in the selective ion transport of covalent organic framework (COF) membranes, accomplished by strategically pairing diverse monomers to create membranes with various pore sizes and environments for specific purposes. We first discuss the merits of using COF materials as a basis for fabricating membranes for ion separation. We then explore the development of COF membranes in areas such as desalination, acid recovery, and energy element extraction, with a particular emphasis on the fundamental principles of membrane design. Lastly, we address both theoretical and practical challenges, as well as potential opportunities in the targeted design of ion-selective membranes. The goal of this Review is to stimulate future investigative efforts in this field, which is of significant scientific and strategic importance.

Continuous Covalent Organic Frameworks Membranes: From Preparation Strategies to Applications

Covalent organic frameworks (COFs) are porous crystalline polymeric materials formed by the covalent bonding of organic units. The abundant organic units library gives the COFs species diversity, easily tuned pore channels, and pore sizes. In addition, the periodic arrangement of organic units endows COFs regular and highly connected pore channels, which has led to the rapid development of COFs in membrane separations. Continuous defect-free and high crystallinity of COF membranes is the key to their application in separations, which is the most important issue to be addressed in the research. This review article describes the linkage types of covalent bonds, synthesis methods, and pore size regulation strategies of COFs materials. Further, the preparation strategies of continuous COFs membranes are highlighted, including layer-by-layer (LBL) stacking, in situ growth, interfacial polymerization (IP), and solvent casting. The applications in separation fields of continuous COFs membranes are also discussed, including gas separation, water treatment, organic solvent nanofiltration, ion conduction, and energy battery membranes. Finally, the research results are summarized and the future prospect for the development of COFs membranes are outlined. More attention may be paid to the large-scale preparation of COFs membranes and the development of conductive COFs membranes in future research.

Recent progress of covalent organic frameworks membranes: Design, synthesis, and application in water treatment

To date, significant efforts have been devoted to eliminating hazardous components to purify wastewater through the development of various nanomaterials. Covalent organic frameworks (COFs), an important branch of the porous crystalline family, possess the peculiarity of ultrahigh surface area, adjustable pore size, and facile functionality. Exciting studies from design fabrication to potential applications in water treatment by COF-based membranes (COMs) have emerged. This review summarizes various preparation strategies and synthesis mechanisms for COMs, including layer-by-layer stacking, in situ growth, interfacial polymerization, and electrochemical synthesis, and briefly describes the advanced characterization techniques for COMs. Moreover, the application of COMs in heavy metal removal, dye separation, purification of radionuclides, pollutant detection, sea water desalination, and so on, is described and discussed. Finally, the perspectives on future opportunities for designing COMs in water purification have been proposed.

Water desalination using stainless steel meshes coated with layered double hydroxide/graphene oxide nanocomposite

Coated stainless steel meshes with layered double hydroxides and graphene oxide nanocomposites (LDH/GO) were used as desalination membranes. The nature of stainless steel mesh allows a greater amount of sorbent to be coated on the surface using sol-gel technique and increases the adsorption capacity of ions and the efficiency of desalination. These substrates improve the contact surface area so that approximately 5 min is required for the desalination process. The LDH/GO stainless steel mesh exhibited excellent corrosion resistance and tensile strength of 99.9% and 112 MPa, respectively. To achieve the best desalination efficiency, different parameters were optimized, including the ratio of GO to LDH in the nanocomposites, the number of mesh layers, NaCl concentrations, and process cycles. The maximum adsorption capacity for the NaCl was 555.5 mg g-1 . The results revealed that LDH/GO nanocomposite was able to remove (94.3 ± 0.5) % of the NaCl under the optimum conditions. The proposed method was used to successfully remove Na+ , Mg+2 , Ca+2 , and K+ cations from seawater, with the yields of 92.3%, 92.5%, 91.2%, and 90.2%, respectively. PRACTITIONER POINTS: The salts are removed via interaction between salt ions and functional groups on the LDH/GO nanocomposite surface. A high amount of adsorbent loaded on the surface of steel mesh leads to an improvement in the adsorption capacity. The sol-gel technique strengthens the LDH/GO nanocomposites on the surface of steel mesh.

Lithium Pyrene Squarate Covalent Organic Frameworks for Efficient Lithium and Magnesium Separation from Salt Water

The increasing pressure for lithium resources from the electric vehicle and nuclear energy industries means that new technologies to separate Mg²⁺ from Li⁺ from salt water are in demand. To address this need, we fabricated lithium pyrene squarate covalent organic frameworks (Li-SQCOFs) to separate Mg²⁺/Li⁺ mixtures from salt water. We optimized the effect of the electrolyte and the amount of the adsorbent and then carried out a kinetics study on the adsorbent recovery at various pH levels using both batch and continuous flow adsorption methods. Li-SQCOF was found to have excellent selectivity for solutions containing a mixture of Mg²⁺/Li⁺ ions. This work represents a unique path for the separation of Mg²⁺/Li⁺ through direct adsorption using a covalent organic framework (COF). The COF-supported ultrafiltration bed made in this study gave a Mg²⁺ separation flux of 60.5 h^-1 m^-2.

Electrochemical Interfacial Polymerization toward Ultrathin COF Membranes for Brine Desalination

Ultrathin covalent organic framework (COF) membranes are urgently demanded in molecular/ionic separations. Herein, we reported an electrochemical interfacial polymerization strategy to fabricate ultrathin COF membranes with thickness of 85 nm, by actively manipulate self-healing effect and self-inhibiting effect. The resulting COF membrane exhibited superior performance in brine desalination with the permeation flux of 92 kg m^-2  h^-1 and the rejection of 99.96 %. Our electrochemical interfacial polymerization strategy enriches the fabrication approach of COF membranes and facilitates the rational design of ultrathin membranes.

Advanced Covalent Organic Framework-Based Membranes for Recovery of Ionic Resources

Membrane technology has shown a viable potential in conversion of liquid-waste or high-salt streams to fresh waters and resources. However, the non-adjustability pore size of traditional membranes limits the application of ion capture due to their low selectivity for target ions. Recently, covalent organic frameworks (COFs) have become a promising candidate for construction of advanced ion separation membranes for ion resource recovery due to their low density, large surface area, tunable channel structure, and tailored functionality. This tutorial review aims to analyze and summarize the progress in understanding ion capture mechanisms, preparation processes, and applications of COF-based membranes. First, the design principles for target ion selectivity are illustrated in terms of theoretical simulation of ions transport in COFs, and key properties for ion selectivity of COFs and COF-based membranes. Next, the fabrication methods of diverse COF-based membranes are classified into pure COF membranes, COF continuous membranes, and COF mixed matrix membranes. Finally, current applications of COF-based membranes are highlighted: desalination, extraction, removal of toxic metal ions, radionuclides and lithium, and acid recovery. This review presents promising approaches for design, preparation, and application of COF-based membranes in ion selectivity for recovery of ionic resources.

Preparation of 2D Materials and Their Application in Oil-Water Separation

The problems of environmental pollution are increasingly severe. Among them, industrial wastewater is one of the primary sources of pollution, so it is essential to deal with wastewater, especially oil and water mixtures. At present, biomimetic materials with special wettability have been proven to be effective in oil-water separation. Compared with three-dimensional (3D) materials, two-dimensional (2D) materials show unique advantages in the preparation of special wettable materials due to their high specific surface area, high porosity, controlled structure, and rich functional group rich on the surface. In this review, we first introduce oil-water mixtures and the common oil-water separation mechanism. Then, the research progress of 2D materials in oil-water separation is presented, including but not limited to their structure, types, preparation principles, and methods. In addition, it is still impossible to prepare 2D materials with large sizes because they are powder-like, which greatly limits the application in oil-water separation. Therefore, we provide here a review of several ways to transform 2D materials into 3D materials. In the end, the challenges encountered by 2D materials in separating oil-water are also clarified to promote future applications.

Molecular modeling of thin-film nanocomposite membranes for reverse osmosis water desalination

The scarcity of freshwater resources is a major global challenge causedby population and economic growth. Water desalination using a reverse osmosis (RO) membrane is a promising technology to supply potable water from seawater and brackish water. The advancement of RO desalination highly depends on new membrane materials. Currently, the RO technology mainly relies on polyamide thin-film composite (TFC) membranes, which suffer from several drawbacks (e.g., low water permeability, permeability-selectivity tradeoff, and low fouling resistance) that hamper their real-world applications. Nanoscale fillers with specific characteristics can be used to improve the properties of TFC membranes. Embedding nanofillers into TFC membranes using interfacial polymerization allows the creation of thin-film nanocomposite (TFNC) membranes, and has become an emerging strategy in the fabrication of high-performance membranes for advanced RO water desalination. To achieve optimal design, it is indispensable to search for reliable methods that can provide fast and accurate predictions of the structural and transport properties of the TFNC membranes. However, molecular understanding of permeability-selectivity characteristics of nanofillers remains limited, partially due to the challenges in experimentally exploring microscopic behaviors of water and salt ions in confinement. Molecular modeling and simulations can fill this gap by generating molecular-level insights into the effects of nanofillers' characteristics (e.g., shape, size, surface chemistry, and density) on water permeability and ion selectivity. In this review, we summarize molecular simulations of a diverse range of nanofillers including nanotubes (carbon nanotubes, boron nitride nanotubes, and aquaporin-mimicking nanochannels) and nanosheets (graphene, graphene oxide, boron nitride sheets, molybdenum disulfide, metal and covalent organic frameworks) for water desalination applications. These simulations reveal that water permeability and salt rejection, as the major factors determining the desalination performance of TFNC membranes, significantly depend on the size, topology, density, and chemical modifications of the nanofillers. Identifying their influences and the physicochemical processes behind, via molecular modeling, is expected to yield important insights for the fabrication and optimization of the next generation high-performance TFNC membranes for RO water desalination.

Highly stable β-ketoenamine-based covalent organic frameworks (COFs): synthesis and optoelectrical applications

Covalent organic frameworks (COFs) are one class of porous materials with permanent porosity and regular channels, and have a covalent bond structure. Due to their interesting characteristics, COFs have exhibited diverse potential applications in many fields. However, some applications require the frameworks to possess high structural stability, excellent crystallinity, and suitable pore size. COFs based on β-ketoenamine and imines are prepared through the irreversible enol-to-keto tautomerization. These materials have high crystallinity and exhibit high stability in boiling water, with strong resistance to acids and bases, resulting in various possible applications. In this review, we first summarize the preparation methods for COFs based on β-ketoenamine, in the form of powders, films and foams. Then, the effects of different synthetic methods on the crystallinity and pore structure of COFs based on β-ketoenamine are analyzed and compared. The relationship between structures and different applications including fluorescence sensors, energy storage, photocatalysis, electrocatalysis, batteries and proton conduction are carefully summarized. Finally, the potential applications, large-scale industrial preparation and challenges in the future are presented.

Charged Nanochannels in Covalent Organic Framework Membranes Enabling Efficient Ion Exclusion

Controllable ion transport through nanochannels is crucial for biological and artificial membrane systems. Covalent organic frameworks (COFs) with regular and tunable nanochannels are emerging as an ideal material platform to develop synthetic membranes for ion transport. However, ion exclusion by COF membranes remains challenging because most COF materials have large-sized nanochannels leading to nonselective transport of small ions. Here we develop ionic COF membranes (iCOFMs) to control ion transport through charged framework nanochannels, the interior surfaces of which are covered with arrayed sulfonate groups to render superior charge density. The overlap of an electrical double layer in charged nanochannels blocks the entry of co-ions, narrows their passageways, and concomitantly restrains the permeation of counterions via the charge balance. These highly charged large-sized nanochannels within the iCOFM enable ion exclusion while maintaining intrinsically high water permeability. Our results reveal possibilities for controllable ion transport based on COF membranes for water purification, ionic separation, sensing, and energy conversion.

Covalent organic frameworks as promising adsorbent paradigm for environmental pollutants from aqueous matrices: Perspective and challenges

Covalent organic frameworks (COFs) are an emerging class of new porous crystalline polymers materials having robust framework, outstanding structural regularity, highly ordered aperture size, inherent porosity, and chemical stability with designer properties, making them an ideal material for adsorbing a variety of contaminants from water bodies. Presented study focusses on the current advances and progress of pristine COFs as well as COFs based composites as an emerging substitute for the adsorption and removal of a variety of pollutants including water desalination technique, heavy metals, pharmaceuticals, dyes and organic pollutants. The absorption capabilities of COFs-derived architecture are evaluated and equated with those of other commonly used adsorbents. The interaction between sorption ability and structural property as well as some regularly utilized ways to improve the adsorption performance of COFs-based materials are also reviewed. Finally, perspective and a summary about the challenges and opportunities of COFs and COFs-derived materials are discussed to deliver some exciting data for fabricating and designing of COFs and COFs-derived materials for remediation of environmental pollutants.

Open Tubular Column Immobilized with Covalent Organic Frameworks for Rapid Separation of Small Molecular Compounds by Capillary Electrochromatography

Preparation of a novel TpBD (synthesized from phloroglucinol and benzidine) covalent organic framework (COF) immobilized open-tubular (OT) capillary is described by in situ growth strategy. The stationary phase in the column was characterized by Fourier transform infrared (FTIR) spectra, X-ray diffraction (XRD), thermogravimetric analysis (TGA), nitrogen adsorption–desorption isotherms, scanning electron microscope (SEM), transmission electron microscopy (TEM) and energy-dispersive X-ray spectrum (EDS). Several families of compounds with different properties (alkylbenzenes, parabens, sulfonamides and benzoic acids) were selected to evaluate the performance of the TpBD COF immobilized capillary. The results showed that the stationary phase was uniform with about 6.0 μm thickness under the optimal preparation conditions, and the relative standard deviations (RSDs) were no more than 3.13% of alkylbenzenes on the TpBD COF immobilized capillary for 11 consecutive runs, which exhibited its excellent reproducibility and stability. A rapid baseline separation of each family of the analytes (neutral parabens, amphoteric sulfonamides and acidic benzoic acids) was obtained in less than 6 min with a resolution (Rs) of 2.79~9.30, which sufficiently verified the rapid separation, high resolution and wide application range of the TpBD COF immobilized capillary, and further revealed this strategy of fabricating COF to capillary column to show great promise in capillary electrochromatography.

Flexible and Robust Three-Dimensional Covalent Organic Framework Membranes for Precise Separations under Extreme Conditions

Membranes based on covalent organic frameworks (COFs) have demonstrated huge potential to resolve the long-standing bottlenecks in separation fields due to their structural and functional attributes. Herein, a three-dimensional COF featuring interpenetrated apertures, 3D-OH-COF, is rationally synthesized on polyimide supports to generate flexible, robust membranes. The resultant 3D-OH-COF presents excellent crystallinity, prominent porosity, and exceptional solvent resistance, enabling the produced membrane a sharp and durable selectivity to small molecules in water and organic solvents. Impressively, the membrane also exhibits excellent flexibility and robustness as verified by the well-maintained performances after serious bending and solvent soaking under elevated temperatures. We further chemically convert 3D-OH-COF into the carboxyl-decorated 3D-COOH-COF by a postsynthetic strategy. The 3D-COOH-COF retains high crystallinity, and the converted membrane receives a remarkable capture ability for targeted multivalent ions over other competing ions. This study exploits a viable avenue to produce practical 3D COF membranes toward ultimate separations under extreme conditions.

Single-Phase Covalent Organic Framework Staggered Stacking Nanosheet Membrane for CO2 -Selective Separation

Two-dimensional covalent organic frameworks (2D COFs) are considered as potential candidates for gas separation membranes, benefiting from permanent porosity, light-weight skeletons, excellent stability and facilely-tailored functionalities. However, their pore sizes are generally larger than the kinetic diameters of common gas molecules. One great challenge is the fabrication of single-phase COF membranes to realize precise gas separations. Herein, three kinds of high-quality β-ketoenamine-type COF nanosheets with different pore sizes were developed and aggregated to ultrathin nanosheet membranes with distinctive staggered stacking patterns. The narrowed pore sizes derived from the micro-structures and selective adsorption capacities synergistically endowed the COF membranes with intriguing CO₂ -philic separation performances, among which TpPa-2 with medium pore size exhibited an optimal CO₂ /H₂ separation factor of 22 and a CO₂ permeance of 328 gas permeation units at 298 K. This membrane performance reached the target with commercial feasibility for syngas separations.

A Perspective on the Application of Covalent Organic Frameworks for Detection and Water Treatment

Global population growth and water resource scarcity are significant social problems currently being studied by many researchers focusing on finding new materials for water treatment. The aim is to obtain quality water suitable for drinking and industrial consumption. In this sense, an emergent class of crystalline porous materials known as Covalent-Organic Frameworks (COFs) offers a wide range of possibilities since their structures can be designed on demand for specific applications. Indeed, in the last decade, many efforts have been made for their use in water treatment. This perspective article aims to overview the state-of-the-art COFs collecting the most recent results in the field for water detection of pollutants and water treatment. After the introduction, where we overview the classical design strategies on COF design and synthesis for obtaining chemically stable COFs, we summarize the different experimental methodologies used for COFs processing in the form of supported and free-standing membranes and colloids. Finally, we describe the use of COFs in processes involving the detection of pollutants in water and wastewater treatment, such as the capture of organic compounds, heavy metals, and dyes, the degradation of organic pollutants, as well as in desalination processes. Finally, we provide a perspective on the field and the potential technological use of these novel materials.

Cross-Linked Covalent Organic Framework-Based Membranes with Trimesoyl Chloride for Enhanced Desalination

The rational design of continuous covalent organic framework (COF)-based membranes is challenging for desalination applications, mainly due to the larger intrinsic pore size of COFs and defects in the crystalline film, which lead to a negligible NaCl rejection ratio. In this work, we first demonstrated a COF-based desalination membrane with in situ cross-linking of a COF-TpPa layer by trimesoyl chloride (TMC) to stitch the defects between COF crystals and cross-link the COF cavity with high-cross-linking degree networks to enhance NaCl rejection. With the addition of TMC monomers, both small spherical nodules and some elongated "leaf-like" features were observed on the membrane surface due to the appearance of nanovoids during cross-linking. The resulting COF-based desalination membrane had a water permeability of approximately 0.81 L m^-2 h^-1 bar^-1 and offered substantial enhancement of the NaCl rejection ratio from being negligible to 93.3% at 5 bar. Mechanistic analysis indicated that the amidation reaction of the secondary amine in keto COF with TMC induced the formation of a highly porous network structure both in the cavity and on the exterior of COF, thereby successfully forming a continuous and nanovoid-containing selective layer for desalination. In addition, the membrane exhibited excellent desalting performance for real industrial wastewater with both low and high salinity. This study proposed that the introduction of a cross-linker to react with the terminal amine group and secondary amine in the backbone of the keto form of COF or its derivatives could provide a facile and scalable approach to fabricate a COF-based membrane with superior NaCl rejection. This opens a new fabrication route for COF-based desalination membranes, as well as extended applications in water desalination.

Covalent organic frameworks as robust materials for mitigation of environmental pollutants

Today, one of the main leading global problems is the presence of different pollutants in the environment. These pollutants not only affect human health but also overshadow the life of other creatures. Thus, pollutant treatment has become a challenging issue among the researchers and the scientific community. Different adsorbents and catalysts have been applied to the removal of pollutants. However, the associated limitations like poor chemical and physical stability, low surface area and low binding capacity revived researchers' attention to exploring alternative materials. Covalent organic frameworks (COFs) are versatile materials created based on the strong covalent interactions between blocked monomers. Unique features, including high specific surface area, high chemical-physical stability and crystallinity render COFs an intriguing sorbent and catalyst in treating pollutants. This review spotlights the applications of COFs as distinguished adsorbents to remove hazardous pollutants from the environment. At first, COFs and their properties as alternative materials were introduced. Then, different synthesis approaches of COFs and their advantages and disadvantages were discussed. Furthermore, the applications of COFs outlined to remove a wide variety of pollutants based on adsorption and degradation. Finally, the prospects of COFs for the treatment of pollutants were evaluated.

Emerging new-generation hybrids based on covalent organic frameworks for industrial applications

This review highlights the advancement of COF hybrid-based materials for diverse industrial applications.

Directional asymmetry over multiple length scales in reticular porous materials

In nature and synthetic materials, asymmetry is a useful tool to create complex and functional systems constructed from a limited number of building blocks. Reticular chemistry has allowed the synthesis of a wide range of discrete and extended structures, from which modularity permits the controlled assembly of their constituents to generate asymmetric configurations of pores or architectures. In this perspective, we present the different strategies to impart directional asymmetry over nano/meso/macroscopic length scales in porous materials and the resulting novel properties and applications.

Design strategies for the controlled assembly of discrete and extended reticular materials with asymmetric configurations of pores or architectures.

Two-dimensional material membranes for critical separations

In this review, we summarize the separation mechanisms and materials adopted for the fabrication of 2D material membranes as well as their applications in critical separations.