Hybrid gel polymer electrolyte based on 1-methyl-1-Propylpyrrolidinium Bis(Trifluoromethanesulfonyl) imide for flexible and shape-variant lithium secondary batteries

In situ Gel Electrolytes for the Interfacial Regulation of Lithium Metal Batteries

With the popularity and development of electronic devices, the demand for lithium batteries is increasing, which also puts high demands on the energy density, cycle life and safety of lithium batteries. Gel electrolytes achieve both of these requirements by curing the electrolytes to reduce the interfacial side reactions of lithium metal batteries. The ionic conductivity of the gel electrolytes prepared by in situ curing reach 8.0×10-4  S cm-1 , and the ionic mobility number is 0.53. Meanwhile, the gel electrolytes maintain a stable electrochemical window of 1.0-5.0 V. Benefited with the interfacial regulation of PEGDA gel electrolytes, the gel lithium metal batteries show better cycling stability, and achieved 97 % capacity retention after 200 cycles (0.2 C) with a lower increasing rate of impedance.

Functional Sulfate Additive-Derived Interfacial Layer for Enhanced Electrochemical Stability of PEO-Based Polymer Electrolytes

Solid-state electrolyte batteries have attracted significant interest as promising next-generation batteries due to their achievable high energy densities and nonflammability. In particular, curable polymer network gel electrolytes exhibit superior ion conductivity and interfacial adhesion with electrodes compared to oxide or sulfide solid electrolytes, bringing them closer to commercialization. However, the limited electrochemical stability of matrix polymers, particularly those based on poly (ethylene oxide) (PEO), presents challenges in achieving stable electrochemical performance in high-voltage lithium metal batteries. Here, these studies report a sulfate additive-incorporated thermally crosslinked gel-type polymer electrolyte (SA-TGPE) composed of a PEO-based polymer matrix and a functional sulfate additive, 1,3-propanediolcyclic sulfate (PCS), which forms stable interfacial layers on electrodes. The electrode-electrolyte interface modified by the PCS enhances the electrochemical stability of the polymer electrolyte, effectively alleviating decomposition of the PEO-based polymer matrix on the cathode. Moreover, it also mitigates side reactions of the Ni-rich NCM cathode and dendrites of lithium metal anode. These studies provide a novel perspective by utilizing interfacial modification through electrolyte additives to resolve the electrochemical instability of PEO-based polymer electrolytes in high-voltage lithium metal batteries.

Molecular dynamics study of fluorosulfonyl ionic liquids as electrolyte for electrical double layer capacitors

The development of high-performance supercapacitors is an important goal in the field of energy storage. Ionic liquids (ILs) are promising electrolyte materials for efficient energy storage in supercapacitors, because of the high stability, low volatility, and wider electrochemical stability window than traditional electrolytes. However, ILs-based supercapacitors usually show a relatively lower power density owing to the inherent viscosity-induced low electrical conductivity. Fluorosulfonyl ILs have aroused much attention in energy storage devices due to its low toxicity and excellent stability. Here, we propose that structural modification is an effective way to improve the energy storage performance of fluorosulfonyl ILs through the classical molecular dynamics (MD) method. Four fluorosulfonyl ILs with different sizes and symmetries were considered. Series of properties including conductivity, interface structure, and double-layer capacitance curves were systematically investigated. The results show that smaller size and more asymmetric structure can enhance self-diffusion coefficient and conductivity, and improve the electrochemical performance. Appropriate modification of the electrodes can further enhance the capacitive performance. Our work provides an opportunity to further understand and develop the fluorosulfonyl ILs electrolyte in supercapacitors.

A Review of Solid-State Proton-Polymer Batteries: Materials and Characterizations

The ever-increasing global population necessitates a secure and ample energy supply, the majority of which is derived from fossil fuels. However, due to the immense energy demand, the exponential depletion of these non-renewable energy sources is both unavoidable and inevitable in the approaching century. Therefore, exploring the use of polymer electrolytes as alternatives in proton-conducting batteries opens an intriguing research field, as demonstrated by the growing number of publications on the subject. Significant progress has been made in the production of new and more complex polymer-electrolyte materials. Specific characterizations are necessary to optimize these novel materials. This paper provides a detailed overview of these characterizations, as well as recent advancements in characterization methods for proton-conducting polymer electrolytes in solid-state batteries. Each characterization is evaluated based on its objectives, experimental design, a summary of significant results, and a few noteworthy case studies. Finally, we discuss future characterizations and advances.

Phosphonate-Functionalized Ionic Liquid Gel Polymer Electrolyte with High Safety for Dendrite-Free Lithium Metal Batteries

The conventional lithium-ion battery technology relies on the liquid carbonate-based electrolyte solution, which causes excessive side reactions, serious risk of electrolyte leakage, high flammability, and significant safety hazards. In this work, phosphonate-functionalized imidazolium ionic liquid (PFIL) is synthesized and used as a gel polymer electrolyte (GPE) to replace the organic carbonate-based electrolyte solution. The as-prepared ionic liquid-based gel polymer electrolyte (IL-GPE) shows low crystallinity, flame retardance, and excellent electrochemical performance. Thanks to the fast double channel transport of lithium ions in the IL-GPE electrolyte, a high ionic conductivity of 0.48 mS cm^-1 and a lithium-ion transference number of 0.37 are exhibited. Symmetrical lithium cells with IL-GPE retain stable cycling even after 3000 h under 0.1 mA cm^-2. IL-GPE exhibits good compatibility toward lithium metal, yielding excellent long-term electrochemical kinetic stability. IL-GPE induces the formation of a uniform and robust SEI layer, inhibiting the growth of lithium dendrites and improving the rate performance and cycle stability. Furthermore, Li/LiFePO₄ cells exhibit a specific capacity of 63 mA h g^-1 after 150 cycles at 5.0 C, with a capacity retention of 90.2%. It is foreseen that this GPE is a promising candidate to enhance the safety of high-performance lithium metal batteries.

Gel Electrolyte for Li Metal Battery

The pursuit of high energy density enables lithium metal batteries (LMBs) to become the research hotpot again. However, the safety concerns including easy leakage and inflammability of the liquid electrolyte and the performance deterioration due to the uncontrollable Li dendrites growth in liquid electrolyte limit the further development of LMBs. Gel electrolyte, the most promising alternative for the commercial liquid electrolyte, is expected to solve the dilemma faced by the liquid electrolyte because of its higher safety, good flexibility and adaptability to the electrode and high ionic conductivity comparable to that of liquid electrolyte. Deeply understanding the characteristics and the role of the gel electrolyte in LMBs is of great importance to achieve superior electrochemical performance of LMBs. In this review, we comprehensively introduce the chemical fundamental of the gel electrolyte. On this basis, the modification strategies and the recent progress of the gel electrolyte for LMBs are systematically reviewed and particularly highlighted, which are categorized based on composition regulation, structural design and functional design. We endeavor to provide guidance for the rational design of the gel electrolyte with superior properties for LMBs.

Ultrahigh Elastic Polymer Electrolytes for Solid-State Lithium Batteries with Robust Interfaces

Solid polymer electrolytes (SPEs) are promising for solid-state lithium batteries, but their practical application is significantly impeded by their low ionic conductivity and poor compatibility. Here, we report an ultrahigh elastic SPE based on cross-linked polyurethane (PU), succinonitrile (SN), and lithium bistrifluoromethanesulfonimide (LiTFSI). The resulting electrolyte (PU-SN-LiTFSI) exhibits an ionic conductivity of 2.86 × 10^-4 S cm^-1, a tensile strength of 3.8 MPa, and a breaking elongation exceeding 3000% at room temperature. A solid-state lithium battery using the electrolyte exhibits a high specific capacity of 150 mAh g^-1 at 0.2C and a long cycling life of up to 700 cycles at 0.5C at room temperature, showing one of the best performances among its counterparts. The excellent performances are attributed to the fact that its ultrahigh elasticity, good ionic conductivity, tensile strength, and electrochemical stability contribute to robust electrode/electrolyte interfaces, thus greatly decreasing the charge-transfer resistance in charge/discharge processes. Our investigations provide a novel strategy to address the intrinsic interfacial issue of solid-state batteries.

Powering smart contact lenses for continuous health monitoring: Recent advancements and future challenges

As the tear is noninvasively and continuously available, it has been turned into a convenient biological interface as a wearable medical device for out-of-hospital and self-monitoring applications. Recent progress in integrated circuits (ICs) and biosensors coupled with wireless data communication techniques have led to the implementation of smart contact lenses that can continuously sample tear fluid, analyze physiological conditions, and wirelessly transmit data to an electronic device such as smartphone, which can send data to relevant healthcare units. Continuous analyte monitoring is one of the significant characteristics of wearable biosensors. However, despite several advantages over other on-skin wearable medical devices, batteries cannot be incorporated on smart contact lenses for continuous electrical power supply due to the limited area. Herein, we review the progress of power delivery techniques of smart contact lenses for the first time. Different approaches, including wireless power transmission (WPT), biofuel cells, supercapacitors, flexible batteries, wired connections, and hybrid methods, are thoroughly discussed to understand the principles of self-sustainable contact lens biosensors comprehensively. Additionally, recent progress in contact lens biosensors is reviewed in detail, thereby providing the prospects for further developments of smart contact lenses as a common biosensing platform for various disease monitoring and diagnostic applications.

Ionic Liquid-Based Gels for Applications in Electrochemical Energy Storage and Conversion Devices: A Review of Recent Progress and Future Prospects

Ionic liquids (ILs) are molten salts that are entirely composed of ions and have melting temperatures below 100 °C. When immobilized in polymeric matrices by sol-gel or chemical polymerization, they generate gels known as ion gels, ionogels, ionic gels, and so on, which may be used for a variety of electrochemical applications. One of the most significant research domains for IL-based gels is the energy industry, notably for energy storage and conversion devices, due to rising demand for clean, sustainable, and greener energy. Due to characteristics such as nonvolatility, high thermal stability, and strong ionic conductivity, IL-based gels appear to meet the stringent demands/criteria of these diverse application domains. This article focuses on the synthesis pathways of IL-based gel polymer electrolytes/organic gel electrolytes and their applications in batteries (Li-ion and beyond), fuel cells, and supercapacitors. Furthermore, the limitations and future possibilities of IL-based gels in the aforementioned application domains are discussed to support the speedy evolution of these materials in the appropriate applicable sectors.