Metal-phenolic network as precursor for fabrication of metal-organic framework (MOF) nanofiltration membrane for efficient desalination

Tunable Hydrated Channels in Covalent Organic Framework Membrane for Seawater Desalination

Nanofiltration and reverse osmosis (RO) are instances of pressure-driven membrane desalination processes (PMDs), which have been extensively employed for seawater desalination due to their great efficiency and environmental friendliness. However, the PMD process is usually limited to thin-film composite polyamide membranes, despite enormous research efforts in recent decades. Here, light-controlled RO COF membranes are developed by using a defect-engineered strategy to chemically rivet spiropyran units into COF channels. The spatial arrangement of spiropyran provides the defect-engineered COF membranes with manageable apertures spanning from 6.9 to 11.1 Å. The COF membrane featuring ordered ultramicropores (6.9 Å, TAPA-TFP-SP-25% COFs) exhibits a preeminent desalinization performance with a NaCl rejection of 91.2%. Furthermore, under light stimulation, the COF channels decorated with spiropyran units are capable of self-regulating the framework structure and hydration conformation by controlling the interconnectivity of confined water clusters, thus achieving hydrated pore size tuning from 11.1 to ∼4.0 Å (from TAPA-TFP-SP-50% to TAPA-TFP-MC-50% COF membrane). Under dark conditions, zwitterionic COF membranes after photoisomerization (TAPA-TFP-MC-50%) exhibit an enhanced KCl rejection (96.2%), representing a 24.1% increase when compared to the COF membrane without interconnected hydrated channels (TAPA-TFP-SP-50%). This membrane channel design concept exploits a viable avenue for developing RO membranes to achieve efficient water purification.

Solvation enabled highly efficient gradient assembly creates robust metal-phenolic coatings

Metal-phenolic networks (MPNs) are supramolecular materials that have received interest in various fields, including biomedicine, separations, environmental remediation, and catalysis. Despite recent advances, the construction of thick and robust MPN coatings that withstand harsh conditions (e.g., acidic, alkaline) remains challenging. In addition, the interfacial assembly of MPNs in mixed solvents (e.g., water and nonaqueous solvents) has not been investigated. Herein, a solvent-regulated (water/ethylene glycol) gradient assembly strategy that can regulate the coordination kinetics of MPNs to realize thick (up to 1.5 μm) and robust MPN coatings on various substrates is presented. Through mediating interactions between polyphenols, a balance is achieved between the aggregation, precipitation, and continuous assembly of well-dispersed precursors. The gradient assembly of polyphenols and metal ions results in lateral and longitudinal cross-linking leading to the formation of robust MPN coatings. The potential application of the coatings in oil/water separation is demonstrated by their excellent performance (oil intrusion pressure of 2.0 kPa and water flux of 2.59 × 105 L m-2h-1), long-term stability, tolerance to various harsh conditions, and thick oil fouling. This study provides further insight into the assembly mechanism of MPNs.

Amine-Modified ZIF Composite Membranes: Regulated Nanochannel Interactions for Enhanced Cation Transport and Precise Separation

Electromembrane water treatment technologies are attracting attention for their energy efficiency and precise separation of counterions. However, ion-exchange membranes exhibit low ionic conductance and selectivity for ions with similar charges. In this study, we developed a novel ZIF-8 composite membrane with amine-modified nanochannels through an in situ PEI-assisted seeding and secondary growth method. An integral and uniform selective layer was formed, and the amine-modified nanochannels induced differential transport of Li+, Na+, K+, and Mg2+ via the dehydration-hydration process. The composite membrane possessed a lower energy barrier for Na+ transport (Ea = 13 kJ mol-1) compared to Mg2+ (Ea = 17 kJ mol-1), showing a Na+ flux of 3.7 × 10-8 mol·cm-2·s-1 and a Na+/Mg2+ permselectivity of 52 (∼60 times higher than the commercial membrane). The physicochemical and electrochemical properties of the composite membranes were systematically characterized, revealing the significant role of the Mg2+ layer in increasing Mg2+ repulsion and facilitating Na+ diffusion. Besides, DFT simulation and interaction energy calculation elucidated that a moderate binding energy and compensation effect between ions and nanochannels, which can be precisely regulated by PEI incorporation, are crucial for the favorable passage of Na+ while maintaining high Mg2+ rejection. The membrane also demonstrated performance stability during a 5-day test and maintained high selectivity across varying salinity and pH conditions. This work advances the development of efficient cation separation membranes for sustainable desalination and resource recovery.

High-performance H2/CO2 separation from 4-nm-thick oriented Zn2(benzimidazole)4 films

High-performance membrane-based H2/CO2 separation offers a promising way to reduce the energy costs of precombustion capture. Current membranes, often made from two-dimensional laminates like metal-organic frameworks, have limitations due to complex fabrication methods requiring high temperatures, organic solvents, and long synthesis time. These processes often result in poor H2/CO2 selectivity under pressurized conditions due to defective transport pathways. Here, we introduce a simple, eco-friendly synthesis of ultrathin, intergrown Zn2(benzimidazole)4 films, as thin as 4 nm. These films are prepared at room temperature using water as the solvent, with a synthesis time of just 10 minutes. By using ultradilute precursor solutions, nucleation is delayed, promoting rapid in-plane growth on a smooth graphene substrate and eliminating defects. These membranes exhibit excellent H2 permselectivity under pressurized conditions. The combination of rapid, green synthesis and high-performance separation makes these membranes highly attractive for precombustion applications.

Controllable Design of Polyamide Composite Membrane Separation Layer Structures via Metal-Organic Frameworks: A Review

Optimizing the structure of the polyamide (PA) layer to improve the separation performance of PA thin-film composite (TFC) membranes has always been a hot topic in the field of membrane preparation. As novel crystalline materials with high porosity, multi-functional groups, and good compatibility with membrane substrate, metal-organic frameworks (MOFs) have been introduced in the past decade for the modification of the PA structure in order to break through the separation trade-off between permeability and selectivity. This review begins by summarizing the recent progress in the control of MOF-based thin-film nanocomposite (TFN) membrane structures. The review also covers different strategies used for preparing TFN membranes. Additionally, it discusses the mechanisms behind how these strategies regulate the structure and properties of PA. Finally, the design of a competent MOF material that is suitable to reach the requirements for the fabrication of TFN membranes is also discussed. The aim of this paper is to provide key insights into the precise control of TFN-PA structures based on MOFs.

Fabrication of polyamide nanofiltration membrane with tannic acid/poly(sodium 4-styrenesulfonate) network-like interlayer for enhanced desalination performance

The traditional polyamide composite nanofiltration membranes have high selectivity and low water permeance, so it is necessary to find strategies to raise the permeance. Herein, a novel polyamide nanofiltration membranes with high permeance were fabricated by coating a loose hydrophilic network-like interlayer, where tannic acid (TA) with pentapophenol arm structure binds to poly(4-styrenesulfonate) (PSS) polymer through hydrogen and ionic interactions. The effects of the network-like TA/PSS interlayer on surface morphology, surface hydrophobicity, and the interfacial polymerization mechanism were investigated. The outcomes demonstrated that the TA/PSS interlayer can offer a favorable environment for interfacial polymerization, enhance the hydrophilicity of the substrate membrane, and delay the release of piperazine (PIP). The optimized TFC-2 presents pure water flux of 22.7 ± 2.8 L m-2 h-1 bar-1, Na2SO4 rejection of 97.1 ± 0.5 %, and PA layer thickness of about 38.9 ± 2.5 nm. This provides new strategies for seeking to prepare simple interlayers to obtain high-performance nanofiltration membranes.

3D-printing of alginate/gelatin scaffold loading tannic acid@ZIF-8 for wound healing: In vitro and in vivo studies

In the present study, ZIF-8 metal-organic framework (MOF) modified with Tannic acid (TA@ZIF-8) was synthesized and impregnated in alginate-gelatin (Alg-Gel) hydrogel. The Alg-Gel scaffolds containing 0, 5, and 10 % of TA@ZIF-8 were fabricated through the 3D printing method specifically denoted as Alg-Gel 0 %, Alg-Gel 5 %, and Alg-Gel 10 %. XRD, FTIR, FESEM, and EDX physically and chemically characterized the synthesized ZIF-8 and TA@ZIF-8 MOFs. Besides, Alg-Gel containing TA@ZIF-8 prepared scaffolds and their biological activity were also evaluated. SEM images verified the nano-size formation of MOFs. Improved swelling and decreased degradation rates after adding TA@ZIF-8 were also reported. Increased compression strength from 0.628 to 1.63 MPa in Alg-Gel 0 % and Alg-Gel 10 %, respectively, and a 2.19 increase in elastic modulus in Alg-Gel 10 % scaffolds were exhibited. Biological activity of scaffolds, including Live-dead and Cell adhesion, antibacterial, in-vivo, and immunohistochemistry assays, demonstrated desirable fibroblast cell proliferation and adhesion, increased bacterial growth inhibition zone, accelerated wound closure and improved expression of anti-inflammatory cytokines in Alg-Gel 10 % scaffolds. The findings of this study confirm that Alg-Gel 10 % scaffolds promote full-thickness wound healing and could be considered a potential candidate for full-thickness wound treatment purposes.

Construction of metal-organic framework/cellulose nanofibers-based hybrid membranes and their ion transport property for efficient osmotic energy conversion

The development of advanced nanofluidic membranes with better ion selectivity, efficient energy conversion and high output power density remains challenging. Herein, we prepared nanofluidic hybrid membranes based on TEMPO oxidized cellulose nanofibers (T-CNF) and manganese-based metal organic framework (MOF) using a simple in situ synthesis method. Incorporated T-CNF endows the MOF/T-CNF hybrid membrane with a high cation selectivity up to 0.93. Nanoporous MOF in three-dimensional interconnected nanochannels provides massive ion transport pathways. High transmembrane ion flux and low ion permeation energy barrier are correlated with a superior energy conversion efficiency (36 %) in MOF/T-CNF hybrid membrane. When operating under 50-fold salinity gradient by mixing simulated seawater and river water, the MOF/T-CNF hybrid membrane achieves a maximum power density value of 1.87 W m-2. About 5-fold increase in output power density was achieved compared to pure T-CNF membrane. The integration of natural nanofibers with high charge density and nanoporous MOF materials is demonstrated an effective and novel strategy for the enhancement of output power density of nanofluidic membranes, showing the great potential of MOF/T-CNF hybrid membranes as efficient nanofluidic osmotic energy generators.

pH-responsive resveratrol-loaded ZIF-8 nanoparticles modified with tannic acid for promoting colon cancer cell apoptosis

Resveratrol (Res) is known for its potential in treating various types of cancers, with a particular advantage of causing minimal toxic side effects. However, its clinical application is constrained by challenges such as poor bioavailability, low water solubility, and chemical instability in neutral and alkaline environments. In light of these limitations, we have developed a pH-responsive drug delivery nanoplatform, Res@ZIF-8/TA NPs, which exhibits good biocompatibility and shows promise for in vitro cancer therapy. Benefiting from the mild reaction conditions provided by zeolitic imidazolate frameworks (ZIFs), a "one-pot method" was used for drug synthesis and loading, resulting in a satisfactory loading capacity. Notably, Res@ZIF-8/TA NPs respond to acidic environments, leading to an improved drug release profile with a controlled release effect. Our cell-based experiments indicated that tannic acid (TA) modification enhances the biocompatibility of ZIFs. 3-(4,5)-dimethylthiahiazo (-z-y1)-3,5-di- phenytetrazoliumromide (MTT assay), Hoechst 33342/PI staining, cell scratch assay, Transwell and Reverse Transcription quantitative PCR (RT-qPCR) assays further demonstrated that Res@ZIF-8/TA NPs inhibited colon cancer cell migration and invasion, and promoted apoptosis of colon cancer cells, suggesting a therapeutic potential and demonstrating anti-cancer properties. In conclusion, the Res@ZIF-8/TA NPs pH-responsive drug delivery systems we developed may offer a promising avenue for cancer therapy. By addressing some of the challenges associated with Res-based treatments, this system could contribute to advancements in cancer therapeutics.

A comparative study of methylene blue adsorption and removal mechanisms by calcium carbonate from different sources

Efficient removal of organic dye pollution from contaminated water is a concern in the absorbent applications. In this study, a green biogenic calcium carbonate (BCC) absorbent was fabricated using Bacillus licheniformis for the removal of methylene blue (MB) from water. This was found to have superior adsorption capacity compared with abiotic calcium carbonate (ACC) and operate within a broad pH range from 3 to 9. MB adsorption on BCC was physical and exothermic. The hydrophobic features, rough nanoporous microstructure, and organic-inorganic mesoporous structure of the BCC may all be responsible for its favorable adsorption mass transfer. The adsorption energy of BCC had a more negative value than that of ACC, indicating a stronger MB interaction with BCC with a lower energy barrier. Hydrogen bonding and electrostatic attraction were involved in the adsorption process. Overall, the findings established a theoretical foundation for the application of BCC in remediation of MB-contaminated water.

MOF@Polydopamine-incorporated membrane with high permeability and mechanical property for efficient fouling-resistant and oil/water separation

Metal organic frameworks (MOFs) have demonstrated great potential for their favorable impacts on the performance of water treatment membranes. Herein, the novel nanoparticles based on both nanoporous MOFs and organic PDA layer was exploited as a novel dopant for the fabrication of PES ultrafiltration (UF) membranes. The PDA was synthesized via oxidative self-polymerization under alkaline conditions and formed adhesive coatings on dispersed MOF. The properties of resulting membranes on the porosity, membrane morphology, hydrophilicity, permeability and anti-fouling performance were adequately investigated. The membranes incorporated with MOF@PDA exhibited exceptionally high permeability (209.02 L m-2·h-1), which is approximately 6 times higher than that of the pure PES membrane, and high BSA rejection (99.12%). Notably, the mechanical property and hydrophilicity of the PES membrane were both enhanced by MOF@PDA, and it has been demonstrated that greater hydrophilicity prevents fouling under practical conditions, which results in significant improvements in flux recovery ratio (FRR) (82%). In addition, the modified PES membranes were used to purify the oil/water emulsion, and the results indicates that the membranes have high permeability and rejection of oil/water emulsion, showing its great promise in practical oily sewage remediation.

Engineering Metal-Organic-Framework (MOF)-Based Membranes for Gas and Liquid Separation

Separation is one of the most energy-intensive processes in the chemical industry, and membrane-based separation technology contributes significantly to energy conservation and emission reduction. Additionally, metal-organic framework (MOF) materials have been widely investigated and have been found to have enormous potential in membrane separation due to their uniform pore size and high designability. Notably, pure MOF films and MOF mixed matrix membranes (MMMs) are the core of the "next generation" MOF materials. However, there are some tough issues with MOF-based membranes that affect separation performance. For pure MOF membranes, problems such as framework flexibility, defects, and grain orientation need to be addressed. Meanwhile, there still exist bottlenecks for MMMs such as MOF aggregation, plasticization and aging of the polymer matrix, poor interface compatibility, etc. Herein, corresponding methods are introduced to solve these problems, including inhibiting framework flexibility, regulating synthesis conditions, and enhancing the interaction between MOF and substrate. A series of high-quality MOF-based membranes have been obtained based on these techniques. Overall, these membranes revealed desired separation performance in both gas separation (e.g., CO2, H2, and olefin/paraffin) and liquid separation (e.g., water purification, organic solvent nanofiltration, and chiral separation).

Separation Performance of Membranes Containing Ultrathin Surface Coating of Metal-Polyphenol Network

Metal-polyphenol networks (MPNs) are being used as versatile coatings for regulating membrane surface chemistry and for the formation of thin separation layers. The intrinsic nature of plant polyphenols and their coordination with transition metal ions provide a green synthesis procedure of thin films, which enhance membrane hydrophilicity and fouling resistance. MPNs have been used to fabricate tailorable coating layers for high-performance membranes desirable for a wide range of applications. Here, we present the recent progress of the use of MPNs in membrane materials and processes with a special focus on the important roles of tannic acid-metal ion (TA-Mⁿ⁺) coordination for thin film formation. This review introduces the most recent advances in the fabrication techniques and the application areas of TA-Mⁿ⁺ containing membranes. In addition, this paper outlines the latest research progress of the TA-metal ion containing membranes and summarizes the role of MPNs in membrane performance. The impact of fabrication parameters, as well as the stability of the synthesized films, is discussed. Finally, the remaining challenges that the field still faces and potential future opportunities are illustrated.

Roles and gains of coordination chemistry in nanofiltration membrane: A review

The nanofiltration (NF) membranes with the specific separation accuracy for molecules with the size of 0.5-2 nm have been applied in various industries. However, the traditional polymeric NF membranes still face problems like the trade-off effect, organic solvent consumption, and weak durability in harsh conditions. The participation of coordination action or metal-organic coordination compounds (MOCs) brings the membrane with uniform pores, better antifouling properties, and high hydrophilicity. Some of the aqueous-phase reactions also help to introduce a green fabrication process to NF membranes. This review critically summarizes the recent research progress in coordination chemistry relevant NF membranes. The participation of coordination chemistry was classified by the various functions in NF membranes like additives, interlayers, selective layers, coating layers, and cross-linkers. Then, the effect and mechanism of the coordination chemistry on the performance of NF membranes are discussed in depth. Perspectives are given for the further promotion that coordination chemistry can make in NF processes. This review also provides comprehensive insight and constructive guidance on high-performance NF membranes with coordination chemistry.

Plant Polyphenol Pyrogallol and Polyamine-Based Co-Deposition for High-Efficiency Nanofiltration Membrane Preparation towards Inorganic Salt Removal

The co-deposition between polyphenols and amines has been demonstrated in order to prepare positively charged nanofiltration (NF) membranes for multivalent cation rejection in recent years; however, the low reactivities of the involved polyphenols usually cause a long co-deposition time and unsatisfactory rejection. Herein, a novel plant polyphenol (PG) was co-deposited with tetraethylenepentamine (TEPA) in a much shorter time period to prepare positively charged NF with high multivalent cation rejection membranes. The performance of the co-deposition membranes can be easily controlled by adjusting the mass ratio of PG and TEPA, reaction time, and pH value of the buffer solution. The optimal membrane, prepared under a polyphenol and polyamine mass ratio of 1:1, coating time of 2 h, and pH value of 8.0, shows a decent pure water permeability of 8.43 L m^-2 h^-1 bar^-1 while maintaining a superior 96.24% MgCl₂ rejection. More importantly, the universality of this method was corroborated by employing other amines with different molecular weights in the co-deposition. This work provides new insights for the preparation of high-performance positively charged NF membranes.

High-flux nanofiltration membrane with modified highly dispersed MOF particles as nano filler

The synthesis of optimized thin film nanocomposite (TFN) membrane with no or few defects is an efficacious method which can improve nanofiltration performance. However, poor dispersion of fillers in the organic phase and wrong compatibility between fillers and polymerizate are still a serious problem. In this study, the particle size of metal organic framework (MOF), aluminum-based metal-organic frameworks (CAU-1) was modulated and for the first time, dodecyl aldehyde was used to modify the surface hydrophobicity of CAU-1, which improved the dispersibility and inhibited the aggregation in the trimesoyl chloride (TMC)/n-hexane solution; later CAU-1 and modified CAU-1 were incorporated into the polyamide (PA) selective layer to synthesize TFN membrane by interfacial polymerization (IP). The particle size modulation and modification of the CAU-1 were demonstrated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) characterization. The characterization showed that PA selective layer was synthesized on the top layer of polysulfone (PSF) substrate. The pure water flux of the TFN membrane was increased to 79.89 ± 1.24 L·m^-2·h^-1·bar^-1 compared to the original thin film composite (TFC) membrane, which was due to the polymerization of 100 nm modified CAU-1 on the PA layer to form a new water molecular channel, thus increasing the water flux by about 70%.

Robust and multifunctional natural polyphenolic composites for water remediation

The scarcity of clean water has become a global environmental problem which constrains the development of public health, economy, and sustainability. In recent years, natural polyphenols have drawn increasing interests as promising platforms towards diverse water remediation composites and devices, owing to their abundant and renewable resource in nature, highly active surface chemistry, and multifunctionality. This review aims to summarize the most recent advances and highlights of natural polyphenol-based composite materials (e.g., nanofibers, membranes, particles, and hydrogels) for water remediation, by focusing on their structural and functional features, as well as their diversified applications including membrane filtration, solar distillation, adsorption, advanced oxidation processes, and disinfection. Finally, the future challenges in this field are also prospected. It is anticipated that this review will provide new opportunities towards the future development of natural polyphenols and other kinds of naturally occurring molecules in water purification applications.

Ultrafast Interfacial Self-Assembly toward Supramolecular Metal-Organic Films for Water Desalination

Supramolecular metal-organic materials are considered as the ideal candidates for membrane fabrication due to their excellent film forming characteristics, diverse metal centers and ligand sources, and designable structure and function. However, it remains challenging to rapidly construct highly permeable supramolecular metal-organic membranes with high salt rejection. Herein, a novel ultrafast interfacial self-assembly strategy to prepare supramolecular metal-organic films through the strong coordination interaction between highly active 1,3,5-triformylphloroglucinol (TFP) ligands and Fe³⁺ , Sc³⁺ , or Cu²⁺ at the organic-aqueous interface is reported. Benefiting from the self-completing and self-limiting characteristics of this interfacial self-assembly, the new kind of supramolecular membrane with optimized composition can be assembled within 3.5 min and exhibits ultrathin, dense, defect-free features, and thus shows an excellent water permeance (21.5 L m^-2  h^-1  bar^-1 ) with a high Na₂ SO₄ rejection above 95%, which outperforms almost all of the non-polyamide membranes and commercially available nanofiltration membranes. This strong-coordination interfacial self-assembly method will open up a new way for the development of functional metal-organic supramolecular films for high-performance membrane separation and beyond.

Surface-engineered polyethersulfone membranes with inherent Fe-Mn bimetallic oxides for improved permeability and antifouling capability

In recent years, bimetallic oxide nanoparticles have garnered significant attention owing to their salient advantages over monometallic nanoparticles. In this study, Fe₂O₃-Mn₂O₃ nanoparticles were synthesized and used as nanomodifiers for polyethersulfone (PES) ultrafiltration membranes. A NIPS was used to fabricate asymmetric membranes. The effect of nanoparticle concentration (0-1 wt.%) on the morphology, roughness, wettability, porosity, permeability, and protein filtration performance of the membranes was investigated. The membrane containing 0.25 wt% nanoparticles exhibited the lowest water contact angle (67°) and surface roughness (10.4 ± 2.8 nm) compared to the other membranes. Moreover, this membrane exhibited the highest porosity (74%) and the highest pure water flux (398 L/m² h), which was 16% and 1.9 times higher than that of the pristine PES membrane. The modified PES membranes showed an improved antifouling ability, especially against irreversible fouling. Bovine serum albumin protein-based dynamic five-cycle filtration tests showed a maximum flux recovery ratio of 77% (cycle-1), 67% (cycle-2), and 65.8% (cycle-5) for the PES membrane containing 0.25 wt% nanoparticles. Overall, the biphasic Fe₂O₃-Mn₂O₃ nanoparticles were found to be an effective nanomodifier for improving the permeability and antifouling ability of PES membranes in protein separation and water treatment applications.

Environmental decomposition and remodeled phytotoxicity of framework-based nanomaterials

Zeolitic imidazole frameworks (ZIFs) have attracted a considerable amount of attention for use in environmental applications (e.g., pollutant adsorption and photocatalysis in water treatments). The environmental stability and toxicity of ZIFs are key prerequisites for their practical applications, but information about these factors is largely lacking. The present work finds that pristine ZIFs (ZIF-8 and ZIF-67) photodegrade from frame structures into two-dimensional nanosheets and are oxidized to zinc carbonate (ZIF-8) and Co₃O₄ (ZIF-67) under visible-light irradiation. The photoinduced electrons, holes and free radicals promote dissolution of the metal cores and organic ligands, leading to collapse of the frame structure. The photodegradation of ZIF-8 alleviates developmental inhibition, oxidative stress, plasmolysis, and photosynthetic toxicity, while the photodegradation of ZIF-67 aggravates nanotoxicity. The integration of metabolomics and transcriptomics analysis reveals that unsaturated fatty acid biosynthesis and metal ion-binding transcription contribute to the altered toxicity of ZIF photodegradation. These findings highlight the roles of photodegradation in structural transformation and alteration of the toxicity of ZIFs, alarming the study of pristine metal-organic frameworks (MOFs).

Porous carbon nanoarchitectonics for the environment: detection and adsorption

As a post-nanotechnology concept, nanoarchitectonics has emerged from the 20th century to the 21st century. This review summarizes the recent progress in the field of metal-free porous carbon nanoarchitectonics.

Microplastics fouling and interaction with polymeric membranes: A review

The emergence and accumulation of microplastics (MPs) in various aquatic environments have recently raised significant concerns. Wastewater treatment plants (WWTPs) have been identified as one of the major sources of MPs discharge to the environment, implying a substantial need to improve advanced techniques for more efficient removal of MPs. Polymeric membranes have been proven effective in MPs removal. However, fouling is the main drawback of membrane processes and MPs can foul the membranes due to their small size and specific surface properties. Hence, it is important to investigate the impacts of MPs on membrane fouling to develop efficient membrane-based techniques for MPs removal. Although membrane technologies have a high potential for MPs removal, the interaction of MPs with membranes and their fouling effects have not been critically reviewed. The purpose of this paper is to provide a state-of-the-art review of MPs interaction with membranes and facilitate a better understanding of the relevant limitations and prospects of the membrane technologies. The first section of this paper is dedicated to a review of recent studies on MPs occurrence in WWTPs aiming to determine the most frequent MPs. This is followed by a summary of recent studies on MPs removal using membranes and discussions on the impact of MPs on membrane fouling and other probable issues (abrasion, concentration polarisation, biofouling, etc.). Finally, some recommendations for further research in this area are highlighted. This study serves as a valuable reference for future research on the development of anti-fouling membranes considering these new emerging contaminates.

High flux and complete dyes removal from water by reduced graphene oxide laminate on Poly Vinylidene Fluoride/graphene oxide membranes

Dyes molecules are the most common pollutants of wastewater in the environment from the textile industry to numbers of technologies include dyeing, printing, and painting procedures. Among membrane-based separation approaches as established methods in the water treatment industry, polymers attracted massive attention in the production of membranes due to their low cost and high-performance filtration of pollutants. However, hydrophobicity and low speed of filtration along with limited decontamination performance against some of the dyes, demand new approaches and membranes to overcome drawbacks points. Herein, a new design introduced including a support layer made by Poly Vinylidene Fluoride (PVDF)/Graphene Oxide (PGO) composite membrane via immersion precipitation process and a thin layer (≤100 nm) of reduced graphene oxide (rGO) deposited (as an active layer) through a simple vacuum filtration method. It has been observed that the presence of the GO sheets in the PGO composite improved the hydrophilicity of the membrane, water flux (from ~90 L m^-2 h^-1 bar^-1 in pristine PVDF to ~1690 L m^-2 h^-1 bar^-1 in PGO), and anti-fouling property. By deposition of rGO laminate on PGO support, dyes separation as high as ~99% can be achieved for most of the cationic and anionic dyes due to electrostatic adsorption, π-π interactions and molecular sieving. This approach opens new insight on hybrid designs for graphene-polymers based membrane toward efficient and fast removal of pollutants from wastewater.

Porous Co3O4 nanodisks as robust peroxidase mimetics in an ultrasensitive colorimetric sensor for the rapid detection of multiple heavy metal residues in environmental water samples

The current method for rapid and ultrasensitive detection of multiple heavy metals in environmental water still face challenge. Herein, the porous Co₃O₄ nanodisks with robust peroxidase-mimicking activity were prepared, and its catalytic activity can be significantly inhibited by the heavy metals like Cd(II), Hg(II), Pb(II) and As, which makes us to establish an ultrasensitive and rapid colorimetric sensor for the detection of multiple heavy metals. Further investigation reveals the anticompetitive inhibition effect of heavy metals on peroxidase-mimicking activity. The colorimetric sensor displays excellent sensitivity and selectivity, and the limits of detection (LOD) for Cd(II), Hg(II), Pb(II) and As are 0.085 μg·L^-1, 0.19 μg·L^-1, 0.2 μg·L^-1 and 0.156 μg·L^-1, respectively. Notably, the absorbance variation will be greater than 0.5 as the concentration of heavy metals exceeds 5 μg·L^-1, which can be clearly discriminated by the naked eyes. Moreover, the average recovery range of heavy metals in actual water samples is from 86.9% to 98.3%. The above results indicate that the proposed sensor exhibits excellent practical applicability for the rapid and ultrasensitive detection of multiple harmful heavy metals in several environmental water samples, which has potential bright application in protecting the environment and human health.

Co-treatment of copper smelting flue dust and arsenic sulfide residue by a pyrometallurgical approach for simultaneous removal and recovery of arsenic

As the typical hazardous arsenic pollutants, copper smelting flue dust (CSFD) and arsenic sulfide residue (ASR) are produced extensively during copper smelting process, which pose significant pressure on environmental protection and green development of the copper industry. This work proposed an economic, efficient, and applicable approach to treat waste with waste, in which the simultaneous removal and recovery of As from CSFD and ASR were realized by a roasting process, with adding sulfuric acid, at a relatively low temperature (300-350 ℃). The thermodynamic analysis and experiments confirmed that the main phases of As₂S₃ and S₀ in the ASR were used as a reductant for reducing As(Ⅴ) in the CSFD, and the introduction of sulfuric acid favorably enhanced the thermodynamic driving force and greatly lowered the reaction temperature. The results indicated that removal and behavior of As were highly dependent on the mass ratio of ASR to CSFD, roasting temperature, and H₂SO₄ dosage. By regulating the parameters, the species As₂S₃, As₂O₅, and arsenate were all converted to volatile As₂O₃, which could be captured and deposited in cold water. In the optimized co-treatment, a satisfied As removal efficiency of 96.12% was achieved, while getting the 97.03% pure As₂O₃.

A comparative study between two novel silicone/graphene-based nanostructured surfaces for maritime antifouling

Two novel superhydrophobic nanocomposite series of polydimethylsiloxane (PDMS) enriched with reduced graphene oxide (RGO) and graphene oxide/boehmite nanorods (GO-γ-AlOOH) nanofillers were synthesized as maritime fouling-release (FR) surfaces. Controlling the nanofillers' structures and distribution in the silicone matrix influenced the self-cleaning and antifouling properties. γ-AlOOH nanorods had a single crystallinity with an average diameter of 10-20 nm and < 200 nm length. A hydrothermal method was used to prepare RGO, while the chemical deposition method was used to synthesis GO-γ-AlOOH nanocomposites for use as fouling-release coating materials. For studying the synergetic effects of graphene-based materials on the surface, mechanical, and FR features, these nanofillers were dispersed in the silicone matrix using the solution casting method. The hydrophobicity and antifouling properties of the surface were studied using water contact angle (WCA), scanning electron, and atomic force microscopes (SEM and AFM). Coatings' roughness, superhydrophobicity, and surface mechanical properties all improved for the homogeneity of the dispersion of the nanocomposite. Laboratory assessments were carried out for 30 days using selected microorganisms to determine the antifouling effects of the coating systems. PDMS/GO-γ-AlOOH nanorod composite had better antibacterial activity than PDMS/RGO nanocomposite against different bacterial strains. This is caused by the high surface area and stabilizing effects of the GO-γ-AlOOH hybrid nanofillers. The PDMS/GO-γ-AlOOH nanorod composite (3 wt%) had the lowest biodegradability percentage (1.6%) and the microbial endurability percentages for gram-positive, gram-negative, and fungi were 86.42%, 97.94%, and 85.97%, respectively. A field trial in natural seawater was conducted to confirm the coatings' FR performance based on the screening process and image analysis for 45 days in a tropical area. The most profound superhydrophobic antifouling nanostructured coating was the homogeneity of the GO-γ-AlOOH (3 wt%) dispersion, which had a WCA of 151° and a rough surface.

The mussel-inspired micro-nano structure for antifouling:A flowering tree

Mussels are typical marine fouling organisms that attach to surfaces though secretions, which is generally the focus of research on mussel-related fouling. This study reveals "a flowering tree" structure on mussel shells with antifouling performance. Based on the antifouling mechanism of surface microstructure, we prepared mussel-like shells (P) using the biomimetic replication method. Mussel adhesion experiments were conducted to examine the anti-mussel performances of the mussel shells and P. The anti-diatom performances of the mussel-like shells were also evaluated using three types of diatoms. The mussels responded differently to different locations on the shells, and the flowering tree microstructure exhibited excellent antifouling performance. In addition, VP (P immersed in vinyl silicon oil) and HP (P immersed in hydroxyl silicone oil) were prepared. The anti-diatom performance of VP was better than those of P and HP, indicating that hydrophobicity has a greater influence on anti-diatom performance than electronegativity. The newly discovered antifouling micro-nano structure was parameterized, revealing that a branch of the flowering tree has an inclination of 13.3° to the surface with a height of 210.1 nm. The results of this study provide insights for further investigations of bionic micro-nano structures in the field of antifouling.

Durable electromagnetic interference (EMI) shielding ramie fabric with excellent flame retardancy and Self-healing performance

Although more and more attention has been paid to electromagnetic interference (EMI) shielding fabric materials due to increasing electromagnetic waves pollution, little attention to their fire safety behavior and durability in practical use. Herein, durable EMI shielding ramie fabric with flame retardant and self-healing performance were fabricated by depositing ammonium polyphosphate (APP)/polyethyleneimine (PEI) layer, MXene sheets and polycaprolactone (PCL) layer. The resultant multifunctional fabric could self-extinguish and the peak heat release rate (pHRR) value reduced about 74.3% for the modified ramie fabric that contains about 12 wt% of PEI/APP bilayer compared with pure ramie fabric. Furthermore, the ramie fabric coated by a increasing amount of MXene sheets changed from insulating to conductive, thus gradually improving their EMI shielding performance, which exhibit a high electrical conductivity of 900.56 S/m with an outstanding SE value of 35 dB at a 1.2 mg/cm² content in the X-band. Besides, When the multifunctional fabric was cut off under external force, it could achieve self-healing and the EMI shielding performance can recover to 34 dB due to the low melting point and good fluidity of PCL. Thus, this multifunctional fabric holds great promise for wearable intelligent cloth, EMI shielding and other fields.

Effects of Scaffold Pore Morphologies on Glucose Transport Limitations in Hollow Fibre Membrane Bioreactor for Bone Tissue Engineering: Experiments and Numerical Modelling

In the current research, three electrospun polycaprolactone (PCL) scaffolds with different pore morphology induced by changing the electrospinning parameters, spinning time and rate, have been prepared in order to provide a fundamental understanding on the effects pore morphology have on nutrient transport behaviour in hollow fibre membrane bioreactor (HFMB). After determining the porosity of the scaffolds, they were investigated for glucose diffusivity using cell culture media (CCM) and distilled water in a diffusion cell at 37 °C. The scanning electron microscope (SEM) images of the microstructure of the scaffolds were analysed further using ImageJ software to determine the porosity and glucose diffusivity. A Krogh cylinder model was used to determine the glucose transport profile with dimensionless variables within the HFMB. The paper discusses the roles of various dimensionless numbers (e.g., Péclet and Damköhler numbers) and non-dimensional groups of variables (e.g., non-dimensional fibre radius) on determining glucose concentration profiles, especially in the scaffold region. A negative linear relationship between glucose diffusivities across PCL scaffolds and the minimum glucose concentrations (i.e., concentration on the outer fibre edge on the outlet side (at z = 1 and r = 3.2) was also found. It was shown that the efficiency of glucose consumption improves with scaffolds of higher diffusivities. The results of this study are expected to help in optimizing designs of HFMB as well as carry out more accurate up scaling analyses for the bioreactor.