Poly(p-terphenyl alkylene)s grafted with highly acidic sulfonated polypentafluorostyrene side chains for proton exchange membranes

Dumbbell-Shaped, Block-Graft Copolymer with Aligned Domains for High-Performance Hydrocarbon Polymer Electrolyte Membranes

Given the environmental concerns surrounding fluoromaterials, the use of high-cost perfluorinated sulfonic acids (PFSAs) in fuel cells and water electrolysis contradicts the pursuit of clean energy systems. Herein, we present a fluorine-free dumbbell-shaped block-graft copolymer, derived from the cost-effective triblock copolymer, poly(styrene-b-ethylene-co-butylene-b-styrene) (SEBS), for polymer electrolyte membranes (PEMs). This unique polymer shape led to the alignment of the hydrophobic-hydrophilic domains along a preferred orientation, resulting in the construction of interconnected proton channels across the membrane. A bicontinuous network allowed efficient proton transport with reduced tortuosity, leading to an exceptional ionic conductivity (249 mS cm-1 at 80 °C and 90 % relative humidity (RH)), despite a low ion exchange capacity (IEC; 1.41). Furthermore, membrane electrode assembly (MEA) prepared with our membrane exhibited stable performance over a period of 150 h at 80 °C and 30 % RH. This study demonstrates a novel polymer structure design and highlights a promising outlook for hydrocarbon PEMs as alternatives to PFSAs.

Synthesis of Sulfonated Polyphenylene Block Copolymers via In Situ Generation of Ni(0)

Proton exchange membranes (PEMs) fabricated from sulfonated polyphenylenes (sPP) exhibit superior proton conductivity and electrochemical performance. However, the Ni(0) catalyst required for Colon's cross-coupling reaction for the synthesis of sPP block copolymers is expensive. Therefore, in this study, we generated Ni(0) in situ from an inexpensive Ni(II) salt in the presence of the reducing metal Zn and NaI. The sPP block copolymers were synthesized from neopentyl-protected 3,5- and 2,5-dichlorobenzenesulfonates and oligo(arylene ether ketone) using the catalyst NiBr₂(PPh₃)₂. The block copolymers synthesized using our strategy and the Ni(0) catalyst exhibited comparable polydispersity index values and high molecular weights. Thin, transparent, and bendable PEMs fabricated using selected high-molecular-weight sPP block copolymers synthesized via our strategy exhibited similar proton conductivities to those of the block copolymers synthesized using the Ni(0) catalyst. We believe that our strategy will promote the synthesis of similar multifunctional block copolymers.

Investigation of the Conditions for the Synthesis of Poly(3,4-ethylenedioxythiophene) ATRP Macroinitiator

One of the most widely used conductive polymers in the growing conductive polymer industry is poly(3,4-ethylenedioxythiophene) (PEDOT), whose main advantages are good thermal and chemical stability, a conjugated backbone, and ease of functionalization. The main drawback of PEDOT for use as wearable electronics is the lack of stretchable and self-healing properties. This can be overcome by grafting PEDOT with flexible side branches. As pure PEDOT is highly stable and grafting would not be possible, a new bromine-functionalized thiophene derivative, 2-(tiophen-3-yl) ethyl 2-bromo-2-methylpropanoate (ThBr), was synthesized and copolymerized with EDOT for the synthesis of a poly(EDOT-co-ThBr) ATRP macroinitiator. After the synthesis of the macroinitiator, flexible polymers could be introduced as side branches by atom-transfer radical polymerization (ATRP) to modify mechanical properties. Before this last synthesis step, the conditions for the synthesis of the ATRP macroinitiator should be investigated, as only functionalized units can function as grafting sites. In this study, nine new copolymers with different monomer ratios were synthesized to investigate the reactivity of each monomer. The ratios used in the different syntheses were ThBr:EDOT = 1:0.2, 1:0.4, 1:0.6, 1:0.8, 1:1, 0.8:1, 0.6:1, 0.4:1, and 0.2:1. In order to determine the effect of reaction time on the final properties of the polymer, macroinitiator synthesis at a 1:1 ratio was carried out at different time periods: 8 h, 16 h, 24 h, and 48 h. The obtained products were characterized by different techniques, and it was found that polymerizations longer than 24 h yielded practically insoluble macroinitiators, thus limiting its further application. Reactivity ratios of both monomers were found to be similar and close to 1, making the copolymerization reaction symmetrical and the obtained macroinitiators almost random copolymers.

EPR Study on the Oxidative Degradation of Phenyl Sulfonates, Constituents of Aromatic Hydrocarbon-Based Proton-Exchange Fuel Cell Membranes

Sulfonated aromatic hydrocarbon-based ionomers are potential constituents of next-generation polymer electrolyte fuel cells (PEFCs). Widespread application is currently limited due to their susceptibility to radical-initiated oxidative degradation that, among other intermediates, involves the formation of highly reactive aromatic cation radicals. The intermediates undergo chain cleavage (dealkylation/dearylation) and the loss of protogenic sulfonate groups, all leading to performance loss and eventual membrane failure. Laser flash photolysis experiments indicated that cation radicals can also be formed via direct electron ejection. We aim to establish the major degradation pathway of proton-exchange membranes (PEMs). To this end, we irradiated aqueous solutions of phenyl sulfonate-type model compounds with a Xe arc lamp, thus generating radicals. The radicals were trapped by 5,5-dimethyl-1-pyrroline N-oxide (DMPO), and the formed adducts were observed by electron paramagnetic resonance (EPR). The formed DMPO spin adducts were assigned and relative adduct concentrations were quantified by simulation of the experimental EPR spectra. Through the formation of the DMPO/•SO3 - adduct, we established that desulfonation dominates for monoaromatic phenyl sulfonates. We observed that diaryl ether sulfonates readily undergo homolytic C-O scission that produces DMPO/•aryl adducts. Our results support the notion that polyphenylene sulfonates are the most stable against oxidative attack and effectively transfer electrons from DMPO, forming DMPO/•OH. Our findings help to identify durable moieties that can be used as building blocks in the development of next-generation PEMs.