In vitro assessment of stainless steel orthodontic brackets coated with titanium oxide mixed Ag for anti-adherent and antibacterial properties against Streptococcus mutans and Porphyromonas gingivalis

Evaluation of Mechanical and Elemental Properties of Bioceramic-Coated Orthodontic Brackets and Enamel Surface

OBJECTIVE

 The aim is to coat orthodontic brackets with two different bioactive materials and to compare the mechanical and morphological properties of coated brackets and tooth surfaces.

MATERIALS AND METHODS

 A total of 120 stainless steel brackets were divided equally into three groups, that is, the uncoated brackets and nanohydroxyapatite (nHA)-coated, and nanobioactive glass (nBG)-coated brackets using a spin coater machine. The brackets were bonded on the enamel surface and underwent remineralization/demineralization cycles for days 1, 7, 14, and 30. At each time interval, the bond strength of the brackets was assessed using mechanical loading. An optical and scanning electron microscope (SEM) were used for surface evaluation, and the adhesive remanent index (ARI) values were obtained and quantified.

STATISTICAL ANALYSIS

 One-way analysis of variance using Tukey's test was used to compare the differences among the groups.

RESULTS

 A uniform distribution of nanoparticles occurred on the surfaces of brackets. The shear bond strength (SBS) showed no significant differences in any tested groups on days 1, 7, and 14. However, control and nBG showed a significant difference from nHA at day 30. On days 7, 14, and 30, the nHA group showed the highest SBS values among the groups. For ARI, most samples showed an adhesive nature of failure at the enamel-brackets interface. The images confirmed the presence of coated particles on brackets and remnants of adhesives after SBS.

CONCLUSION

 This study confirmed that the nHA- and nBG-coated brackets have a high potential for application in orthodontics regarding structural and mechanical properties.

Antibacterial efficacy of nanoparticles on orthodontic materials-A systematic review and meta-analysis

AIM

This study aims to evaluate the efficacy of coated nanoparticles within orthodontic appliances as a novel strategy to enhance their antibacterial properties.

MATERIAL AND METHODS

A systematic search for relevant articles published between 2013 and March 2024 was conducted across electronic databases including PubMed, Scopus, Web of Science, and EBSCOhost. Studies meeting pre-defined eligibility criteria were included and assessed for methodological quality. Data on the antibacterial activity of coated nanoparticles on orthodontic appliances was extracted from included studies.

RESULTS

A range of antimicrobial agents, including metallic nanoparticles (silver, titanium dioxide, silver-platinum alloy, zinc oxide, copper oxide), and others like chitosan, quaternary ammonium-modified gold nanoclusters, titanium nitride doped with calcium phosphate, and graphene oxide, have been explored for incorporation into orthodontic materials. Studies have shown a significant boost in the antibacterial capacity of these materials compared to controls, suggesting promise for improved oral hygiene during orthodontic treatment.

CONCLUSION

It can be concluded that incorporating nanoparticles into orthodontic appliances holds promise for enhancing their antibacterial properties. However, the studies displayed significant heterogeneity therefore, further research with standardized protocols for factors like nanoparticle size, concentration, and incorporation techniques across various orthodontic materials is crucial to guide future clinical applications.

PROSPERO REGISTRATION

CRD42024521326.

New generation of orthodontic devices and materials with bioactive capacities to improve enamel demineralization

OBJECTIVE

The article reviewed novel orthodontic devices and materials with bioactive capacities in recent years and elaborated on their properties, aiming to provide guidance and reference for future scientific research and clinical applications.

DATA, SOURCES AND STUDY SELECTION

Researches on remineralization, protein repellent, antimicrobial activity and multifunctional novel bioactive orthodontic devices and materials were included. The search of articles was carried out in Web of Science, PubMed, Medline and Scopus.

CONCLUSIONS

The new generation of orthodontic devices and materials with bioactive capacities has broad application prospects. However, most of the current studies are limited to in vitro studies and cannot explore the true effects of various bioactive devices and materials applied in oral environments. More research, especially in vivo researches, is needed to assist in clinical application.

CLINICAL SIGNIFICANCE

Enamel demineralization (ED) is a common complication in orthodontic treatments. Prolonged ED can lead to dental caries, impacting both the aesthetics and health of teeth. It is of great significance to develop antibacterial orthodontic devices and materials that can inhibit bacterial accumulation and prevent ED. However, materials with only preventive effect may fall short of addressing actual needs. Hence, the development of novel bioactive orthodontic materials with remineralizing abilities is imperative. The article reviewed the recent advancements in bioactive orthodontic devices and materials, offering guidance and serving as a reference for future scientific research and clinical applications.

Antibacterial properties and abrasion-stability: Development of a novel silver-compound material for orthodontic bracket application

PURPOSE

Bacteria-induced white spot lesions are a common side effect of modern orthodontic treatment. Therefore, there is a need for novel orthodontic bracket materials with antibacterial properties that also resist long-term abrasion. The aim of this study was to investigate the abrasion-stable antibacterial properties of a newly developed, thoroughly silver-infiltrated material for orthodontic bracket application in an in situ experiment.

METHODS

To generate the novel material, silver was vacuum-infiltrated into a sintered porous tungsten matrix. A tooth brushing simulation machine was used to perform abrasion equal to 2 years of tooth brushing. The material was characterized by energy dispersive X‑ray (EDX) analysis and roughness measurement. To test for antibacterial properties in situ, individual occlusal splints equipped with specimens were worn intraorally by 12 periodontal healthy patients for 48 h. After fluorescence staining, the quantitative biofilm volume and live/dead distribution of the initial biofilm formation were analyzed by confocal laser scanning microscopy (CLSM).

RESULTS

Silver was infiltrated homogeneously throughout the tungsten matrix. Toothbrush abrasion only slightly reduced the material's thickness similar to conventional stainless steel bracket material and did not alter surface roughness. The new silver-modified material showed significantly reduced biofilm accumulation in situ. The effect was maintained even after abrasion.

CONCLUSION

A promising, novel silver-infiltrated abrasion-stable material for use as orthodontic brackets, which also exhibit strong antibacterial properties on in situ grown oral biofilms, was developed. The strong antibacterial properties were maintained even after surface abrasion simulated with long-term toothbrushing.

Corrosion of Fixed Orthodontic Appliances: Causes, Concerns, and Mitigation Strategies

The orthodontic supply market is a prosperous billion-dollar industry, driven by an increasing demand for orthodontic appliances. The supremacy of metallic first-generation biomaterials is evident for manufacturing brackets, archwires, bands, and other components due to their well-recognized chemical inertness, spontaneous passivation, biocompatibility, and favorable mechanical properties combination. However, the oral cavity is the ultimate corrosion-promoting environment for any metallic material. In this work, the general picture of the intraoral degradation of fixed orthodontic appliances is first addressed, from the causes to the harmful effects and their oral clinical implications. Current mitigation strategies are also pointed out, including the alloys’ bulk composition adjustment combined with new and advanced manufacturing processes and/or their surface treatment or coating deposition. The versatile use of thin films and coatings stands out with different deposition technologies: Many in vivo and in vitro efforts have been devoted to oral aging, from monolithic to composite architectures and micro- to nano-scale materials, to meet the best and safest oral practice demands. Unfortunately, literature data suggest that even the existing commercially available protective coatings have drawbacks and are fallible. Further multidisciplinary research is still required to effectively mitigate the corrosion behavior of fixed orthodontic appliances.

Effectiveness of two photosensitizer-mediated photodynamic therapy for treating moderate peri-implant infections in type-II diabetes mellitus patients: A randomized clinical trial

PURPOSE

This study evaluated the impact of Fox Green (FG) against methylthioninium chloride (MTC)-facilitated photodynamic therapy (PDT) as an adjunctive to manual scaling (MS) on the peri‑implant clinical and cytokine parameters in type-2 diabetes mellitus (DM) patients with peri‑implantitis.

METHODS

Patients were divided into group-A comprising 13 patients who received adjunctive FG-PDT using a diode laser (wavelength: 810 nm; irradiation power: 300 mW; irradiation time: 30 s; fluence: 56 Jcm-2), group-B comprising 12 patients who received adjunctive MTC-PDT using a diode laser (wavelength: 660 nm; irradiation power: 100 mW; irradiation time: 120 s/site; fluence: 30 Jcm-2), and group-C comprising 13 patients who received MS alone [control group]). After diagnosing the diabetics with peri‑implantitis (established on eligibility criteria), a structured questionnaire was used to gather the information of the participants. Plaque (PS) and bleeding scores (BS), along with peri‑implant probing scores (PPS) and peri‑implant bone loss (PIBL), together with immunological variables (interleukin [IL]-6, tumor necrosis factor-alpha [TNF-α], and advanced glycation end products [AGEs]) were measured in all study group participants at baseline, 3-month, and 6-month follow-ups.

RESULTS

A significant reduction was observed for PS, BS, and PPS within all tested groups at each follow-up visits compared from their baseline values (p<0.05). However, a substantial decrease in PIBL was observed in all study group patients at 6-month follow-up as compared to 3-month follow-up (p<0.05). Regarding the levels of IL-6 and TNF-α, a substantial reduction was observed in all study groups until 6-month from their baseline scores (p<0.05). However, no changes were observed in the levels of AGEs in any group at either visit (p>0.05).

CONCLUSION

In DM patients with periimplantitis, adjunctive FG-PDT and MTC-PDT exhibited comparable outcomes in terms of peri‑implant clinical as well as pro-inflammatory characteristics than MS alone among peri‑implantitis patients with DM.

Effects of titanium oxide coating on the antimicrobial properties, surface characteristics, and cytotoxicity of orthodontic brackets - A systematic review and meta analysis of in-vitro studies

Objective

The objective of this review is to systematically analyze the available literature on the effects of titanium oxide (TiO₂) coating on the antimicrobial properties, surface characteristics, and cytotoxicity of orthodontic brackets.

Methods

In-vitro studies reporting on the effects of Titanium oxide (TiO₂) coatings on antimicrobial properties, surface roughness, cytotoxic activity and bacterial adhesion of orthodontic brackets were included in the review. Electronic databases such as PubMed, SCOPUS, Web of Science and Google Scholar, were searched till September 2022. Risk of Bias was analyzed by using RoBDEMAT tool. Meta-analysis using Random Effects Model was performed for assessing the antimicrobial activity against S. mutans, C. albicans and L. Acidophilus.

Results

A total of 11 studies were included the RoB analysis revealed sufficient reporting across all the domains and inconsistent reporting in only two of the domains. On qualitative analysis, a significant antimicrobial effect of TiO2 coating on orthodontic brackets against Streptococcus mutans, Candida albicans and Lactobacillus acidophilus was reported. The meta analysis revealed a significant overall antimicrobial effect with a high heterogeneity. (SMD: 3.5; p < 0.00001; i2 - 99.2%).

Conclusion

An overall significant antimicrobial effect of TiO₂ coated brackets against S. mutans, L. Acidophilus, C. Albicans was noted but with a high heterogeneity. The subgroup analysis revealed a significant antimicrobial effect on C albicans with a low heterogeneity but it was limited by a publication bias. The included studies reported reduced surface roughness, minimal bacterial adhesion and less cytotoxic activity with TiO₂ coated brackets than uncoated brackets.

Gold-oxoborate nanocomposite-coated orthodontic brackets gain antibacterial properties while remaining safe for eukaryotic cells

The study's main objective is to limit bacterial biofilm formation on fixed orthodontic appliances. Bacterial biofilm formation on such devices (e.g., brackets) causes enamel demineralization, referred to as white spot lesions (WSL). WSL is significant health, social and economic problem. We provide a nanotechnology-based solution utilizing a nanocomposite of gold nanoparticles embedded in a polyoxoborate matrix (BOA: B-boron, O-oxygen, A-gold, Latin aurum). The nanocomposite is fully inorganic, and the coating protocol is straightforward, effective, and ecologically friendly (low waste and water-based). Prepared coatings are mechanically stable against brushing with a toothbrush (up to 100 min of brushing). Bacteria adhesion and antibacterial properties are tested against Streptococcus mutans-common bacteria in the oral cavity. BOA reduces the adhesion of bacteria by around 78%, that is, from around 7.99 × 10⁵  ± 1.33 × 10⁵  CFU per bracket to 1.69 × 10⁵  ± 3.07 × 10⁴  CFU per bracket of S. mutans detached from unmodified and modified brackets, respectively. Modified fixed orthodontic brackets remain safe for eukaryotic cells and meet ISO 10993-5:2009 requirements for medical devices. The gathered data show that BOA deposited on orthodontic appliances provides a viable preventive measure against bacteria colonization, which presents frequent and significant complications of orthodontic treatment.

Functional Surface Coatings on Orthodontic Appliances: Reviews of Friction Reduction, Antibacterial Properties, and Corrosion Resistance

Surface coating technology is an important way to improve the properties of orthodontic appliances, allowing for reduced friction, antibacterial properties, and enhanced corrosion resistance. It improves treatment efficiency, reduces side effects, and increases the safety and durability of orthodontic appliances. Existing functional coatings are prepared with suitable additional layers on the surface of the substrate to achieve the abovementioned modifications, and commonly used materials mainly include metal and metallic compound materials, carbon-based materials, polymers, and bioactive materials. In addition to single-use materials, metal-metal or metal-nonmetal materials can be combined. Methods of coating preparation include, but are not limited to, physical vapor deposition (PVD), chemical deposition, sol-gel dip coating, etc., with a variety of different conditions for preparing the coatings. In the reviewed studies, a wide variety of surface coatings were found to be effective. However, the present coating materials have not yet achieved a perfect combination of these three functions, and their safety and durability need further verification. This paper reviews and summarizes the effectiveness, advantages and disadvantages, and clinical perspectives of different coating materials for orthodontic appliances in terms of friction reduction, antibacterial properties, and enhanced corrosion resistance, and discusses more possibilities for follow-up studies as well as for clinical applications in detail.

Antimicrobial efficacy, optical properties and flexural strength following antimicrobial photodynamic therapy over vacuum-formed orthodontic retainers

BACKGROUND AND AIMS

Vacuum-formed retainers (VFRs) are widely used in dental practices because of their superior esthetics. However, simultaneous maintenance of their hygiene, mechanical and optical properties is challenging. This study aimed to evaluate and compare the disinfection efficacy of antimicrobial photodynamic therapy (aPDT), chlorhexidine (CHX), sodium hypochlorite (NaOCl) and water over VFRs specimens, along with their effect on flexural strength and color stability.

MATERIALS AND METHODS

Fabricated VFRs of thicknesses 1 mm and 2 mm were contaminated with S. mutans and C. albicans. Brain Heart Infusion agar was used to seed Streptococcus Mutans whereas Candida Albicans was seeded in Sabourand Dextrose Agar. The contaminated retainers were divided into four groups and decontaminated using four different treatment protocols: aPDT, CHX, NaOCl and water, with 10 specimens per group. Microbial viability following decontamination, was assayed using MTT. To assess the color stability, pre and post decontamination color difference of 10 specimens was recorded using a spectrophotometer by blinding technique. The flexural strength of 10 specimens was measured using a universal testing machine by a standardized 3-point flexural strength (FS) test.

RESULT

aPDT showed the highest reduction in the viability of S. mutans (28%) and C. albicans (20%) species in 1 mm thickness group while the second highest reduction following disinfection with CHX (40%) in followed by NaOCl disinfection (50%). On comparison between 1 mm and 2 mm, a statistically significant difference was noted for S. mutans in aPDT (p = 0.033) and NaOCl (p = 0.028) groups, and for C. albicans, a significant difference was noted within NaOCl (p = 0.001) and CHX (p = 0.043) groups. For FS, a statistically significant difference (p < 0.05) was observed between aPDT and the rest of the groups, whereas there was no statistically significant difference in the flexural strength between the CHX, NaOCl and water groups (p > 0.05) in both 1 mm and 2 mm specimens. Between 1 mm and 2 mm specimens, no statistically significant difference in the mean color difference was noted after any disinfection protocol (p > 0.05).

CONCLUSION

Antimicrobial photodynamic therapy showed a remarkable reduction in candidal and bacterial viability over VFRs. aPDT treated VFR specimens showed increased flexural strength and a higher color difference post treatment compared to other reagents.

Influence Of Orthodontic Brackets Design And Surface Properties On The Cariogenic Streptococcus mutans Adhesion

Objective

To compare the surface properties of self-ligating metallic (SLM), ceramic esthetic, and conventional metallic (CM) brackets, and evaluate the adhesion of Streptococcus mutans biofilms to their surface, attempting to interpret the correlation between bracket type and enamel demineralization from a microbiological perspective.

Materials and methods

Twenty-two brackets of each group were used. The brackets’ surface roughness was defined and the bacterial adhesion was performed using the strain S. mutans ATCC25175 with 8 h or 24 h of incubation time. The total bacterial adhesion (TBA) of biofilms was assessed using optical density (OD) methodology. To quantify bacteria viability (BV), the colony forming units (CFU) were counted. A scanning electron microscopy (SEM) observation of biofilms was also performed. Results: Ceramic brackets exhibited significantly higher roughness (0.304) compared to CM (0.090) and SLM (0.067) ones (C > CM = SLM). The data obtained with the TBA and BV tests showed that S. mutans biofilm formed on bracket groups exhibited similar results for both incubation periods. From the SEM images it is possible to observe that biofilm structure formed for 24 h was denser than that for 8 h of incubation with significantly more aggregates and cells for three groups.

Conclusion

This in vitro study suggests that despite the higher surface roughness of ceramic brackets, this alone does not influence the adhesion of the S. mutans biofilms.

Clinical relevance

From a microbiological perspective, the bracket's design may be more relevant than its surface roughness with respect to the adhesion of cariogenic bacteria biofilm with potential risk to dental enamel integrity.

Therapeutic Applications of Antimicrobial Silver-Based Biomaterials in Dentistry

Microbial infection accounts for many dental diseases and treatment failure. Therefore, the antibacterial properties of dental biomaterials are of great importance to the long-term results of treatment. Silver-based biomaterials (AgBMs) have been widely researched as antimicrobial materials with high efficiency and relatively low toxicity. AgBMs have a broad spectrum of antimicrobial properties, including penetration of microbial cell membranes, damage to genetic material, contact killing, and dysfunction of bacterial proteins and enzymes. In particular, advances in nanotechnology have improved the application value of AgBMs. Hence, in many subspecialties of dentistry, AgBMs have been researched and employed, such as caries arresting or prevention, root canal sterilization, periodontal plaque inhibition, additives in dentures, coating of implants and anti-inflammatory material in oral and maxillofacial surgery. This paper aims to provide an overview of the application approaches of AgBMs in dentistry and present better guidance for oral antimicrobial therapy via the development of AgBMs.

Assessment of frictional resistance and surface roughness in orthodontic wires coated with two different nanoparticles

Several mechanical and biological factors may change the orthodontic wire frictional resistance (FR). Titanium dioxide (TiO₂ ) and silica dioxide (SiO₂ ) nanoparticle (NP) coatings may be used to improve the characteristics of materials, reducing FR between archwire and bracket. This in vitro study aimed to evaluate the FR of orthodontic wires with and without coating in both dry and wet environments and measure the surface roughness (SR). One hundred and eighty segments of rectangular Cr-Ni orthodontic wires (Morelli Co, Brazil) were divided into three groups according to the NP coating applied: TiO₂ group; SiO₂ group; and control group. The SR parameters were measured in an optical profilometer, the surface morphology was analyzed with scanning electron microscopy (SEM), and FR was performed in a universal testing machine in dry and wet environments (n = 30). The statistical analysis was performed using the Generalized Estimated Equations model with a Bonferroni post-test (α = 0.05). It was observed that SiO₂ NP coating decreased FR significantly when compared to the TiO₂ and control groups, in both environments (p < .001). The SiO₂ and TiO₂ groups presented statistically lower SR than the control group and were similar to each other (p < .001). The SiO₂ group presented the lower depth of Valley parameter than the TiO₂ group (p < .001). The SEM showed that the TiO₂ coating had the most heterogeneous surface morphology than the SiO₂ and control groups. The orthodontic wires with NP coating modified the FR and morphology. The SiO₂ coating reduced FR in both dry and wet environments and decreased SR.

Real time polymerase chain reaction analysis in the patients treated with fixed appliances after the orthodontic treatment: A follow-up study

This study aimed to compare the changes in the salivary cariogenic bacteria levels using qPCR and oral hygiene status after orthodontic treatment with fixed appliances during the retention phase concerning the patient and treatment variables. In this study, saliva samples were collected from 35 patients before debonding (T₀) and after five weeks of debonding on retention (T₁). The saliva samples were collected to extract the genomic DNA, and using specific probes and primers using real-time polymerase chain reaction was performed to analyze the changes in S. mutants, S. sobrinus, L. Casei after orthodontic treatment with fixed appliances. Additionally, OHI levels were also measured. The current study confirms the statistical association between T0 and T1 groups of S. mutants (p = 0.028) and S. sobrinus (p = 0.049). However, a lack of association was observed with L. Casei (p > 0.05). The number of bacteria was decreased from the T₀ group and increased in the T₁ group in Streptococcus mutants (S. mutants) and Streptococcus Sobrinus (S. sobrinus) while in Lactobacillus Casei (L. Casei) it was vice versa between T₀ and T₁ groups. The Oral Hygiene Levels (OHI) levels were also found to be statistically associated (p = 0.003). This study concludes that comparing the salivary cariogenic bacterial levels at T₀ (before debonding of fixed orthodontic appliances), with T1 (Five weeks after the debonding), and despite better oral hygiene, there was increase in salivary S mutants and S sobrinus levels. The current study suggested that orthodontic patients need careful hygienic procedures during the retention period. Future studies are recommended with additional follow-up and a large sample size.

Should local drug delivery systems be used in dentistry?

In dentistry, the use of biomaterial-based drug delivery systems (DDS) aiming the release of the active compounds directly to the site of action is slowly getting more awareness among the scientific and medical community. Emerging technologies including nanotechnological platforms are offering novel approaches, but the majority are still in the proof-of-concept stage. This study critically reviews the potential use of DDS in anesthesiology, oral diseases, cariology, restorative dentistry, periodontics, endodontics, implantology, fixed and removable prosthodontics, and orthodontics with a special focus on infections. It also stresses the gaps and challenges faced. Despite numerous clinical and pharmacological advantages, some disadvantages of DDS pose an obstacle to their widespread use. The biomaterial's biofunctionality may be affected when the drug is incorporated and may cause an additional risk of toxicity. Also, the release of sub-therapeutic levels of drugs such as antibiotics may lead to microbial resistance. Multiple available techniques for the manufacture of DDS may affect drug release profiles and their bioavailability. If the benefits outweigh the costs, DDS may be potentially used to prevent or treat oral pathologies as an alternative to conventional strategies. A case-by-case approach must be followed.

Effects of TiO2-Coated Stainless Steel Orthodontic Wires on Streptococcus mutans Bacteria: A Clinical Study

Introduction

The aim of this study was to clinically evaluate Streptococcus mutans adhesion on titanium dioxide–coated stainless steel orthodontic wires to decrease white-spot formation.

Methods

In this study, four groups of 17 patients each (n=68) aged 12–25 years participated. A titanium dioxide coating layer was deposited on 0.4572 mm stainless steel orthodontic wires using physical vapor deposition. The coated wires were randomly assigned to one jaw, and the opposite jaw received an uncoated wire as control. Patients were divided into groups according to the duration that wires were in their mouths: A) 1 week, B) 2 weeks, C) 3 weeks, and D) 4 weeks. Block randomization was used to assign patients to each group. At the end of the experiment, 20 mm of each wire (canine-to-canine area) was cut and cultured in S. mutans–specific medium. The culture plates were placed in an incubator containing 5% CO₂ for 72 hours at 37°C, and then colonies were counted. MTT was used to test the biocompatibility of the coated and uncoated wires. To evaluate the stability of the coated titanium dioxide layer on the wires, titanium concentration on the saliva was determined using inductively coupled plasma mass spectroscopy.

Results

The Kruskal–Wallis test showed that there was no significant difference in colony counts among the coated wires during 1–4 weeks (p<0.48). In the uncoated-wire groups, colonys count at week 1 were higher than weeks 24 –(p<0.022). Wilcoxon’s test showed that the number of colonies was significantly different in groups A and C, but there was no significant difference in groups B or D. MTT-assay results showed that there was not a significant difference between cell viability in the coated-wire group and the control. The Kruskal–Wallis test showed that there was no significant difference in titanium concentration in the studied groups (p<0.834).

Conclusion

Application of titanium dioxide coating is effective in reducing bacterial adhesion at wire insertion.

Effects of Various Polishing Techniques on the Surface Characteristics of the Ti-6Al-4V Alloy and on Bacterial Adhesion

Ti-6Al-4V, although widely used in dental materials, causes peri-implant inflammation due to the long-term accumulation of bacteria around the implant, resulting in bone loss and eventual failure of the implant. This study aims to overcome the problem of dental implant infection by analyzing the influence of Ti-6Al-4V surface characteristics on the quantity of accumulated bacteria. Ti-6Al-4V specimens, each with different surface roughness are produced by mechanical, chemical, and electrolytic polishing. The surface roughness, surface contact angle, surface oxygen content, and surface structure were measured via atomic force microscopy (AFM), laser scanning confocal microscopy (LSCM), drop shape analysis (using sessile drop), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). The micro and macro surface roughness are 10.33–120.05 nm and 0.68–2.34 μm, respectively. The surface X direction and Y direction contact angle are 21.38°–96.44° and 18.37°–92.72°, respectively. The surface oxygen content is 47.36–59.89 at.%. The number of colonies and the optical density (OD) are 7.87 × 106–17.73 × 106 CFU/mL and 0.189–0.245, respectively. The bacterial inhibition were the most effective under the electrolytic polishing of Ti-6Al-4V. The electrolytic polishing of Ti-6Al-4V exhibited the best surface characteristics: the surface roughness of 10 nm, surface contact angle of 92°, and surface oxygen content of 54 at.%, respectively. This provides the best surface treatment of Ti-6Al-4V in dental implants.

In vitro corrosion studies of stainless-steel dental substrates during Porphyromonas gingivalis biofilm growth in artificial saliva solutions: providing insights into the role of resident oral bacterium

Stainless-steel AISI 321 is an effective material for fabricating dental crowns and other implants utilized dental restorative protocols for elderly and pediatric populations. This unique clinical application is possible through the mechanical stability and corrosion-resistance properties of this metallic material. However, stainless-steel dental implants eventually fail, leading to the creation of surface cavities and cracks within their microstructures during persistent mechanical stresses and biocorrosion. In this study, the in vitro corrosion behaviour of a medical-grade stainless-steel dental substrate was investigated during Porphyromonas gingivalis biofilm growth process in artificial saliva culture suspension (ASCS). Among the causative bioagents of corrosion, P. gingivalis was chosen for this study since it is also responsible for oral periodontitis and a major contributing factor to corrosion in most dental implants. Increased P. gingivalis growth was observed within the incubation period under study as compact cellular clusters fouled the metal surfaces in ASCS media. This led to the corrosion of steel substrates after bacterial growth maturity within 90 days. Corrosion rate increased with higher CFU and bacterial incubation period for all test substrates due to biocorrosion incited by the volatile sulphide products of P. gingivalis metabolism. The presence of some of these volatile compounds has been observed from experimental evidences. Significant anodic degradation in the forms of localized pitting were also recorded by surface analytical techniques. Residual fluorinated ions within the ASCS media also increased the rate of anodic dissolution due to media acidity. This study has provided extensive insights into the fate of stainless-steel dental crown in oral environments infected by a resident oral bacterium. Influences of oral conditions similar to fluoride-enriched mouthwashes were reflected in a view to understanding the corrosion patterns of stainless-steel dental substrates.

A stainless-steel 321 dental substrate significantly corroded within Porphyromonas gingivalis growth culture in artificial saliva culture suspension, with and without NaF additive.

Polymeric and inorganic nanoscopical antimicrobial fillers in dentistry

Failure of dental treatments is mainly due to the biofilm accumulated on the dental materials. Many investigations have been conducted on the advancements of antimicrobial dental materials. Polymeric and inorganic nanoscopical agents are capable of inhibiting microorganism proliferation. Applying them as fillers in dental materials can achieve enhanced microbicidal ability. The present review provides a broad overview on the state-of-the-art research in the field of antimicrobial fillers which have been adopted for incorporation into dental materials over the last 5 years. The antibacterial agents and applications are described, with the aim of providing information for future investigations. STATEMENT OF SIGNIFICANCE: Microbial infection is the primary cause of dental treatment failure. The present review provides an overview on the state-of-art in the field of antimicrobial nanoscopical or polymeric fillers that have been applied in dental materials. Trends in the biotechnological development of these antimicrobial fillers over the last 5 years are reviewed to provide a backdrop for further advancement in this field of research.

Diamond-like carbon thin films prepared by pulsed-DC PE-CVD for biomedical applications

In the present research, diamond-like carbon (DLC) thin films were applied on steel substrates by means of pulsed-direct current (DC) plasma-enhanced chemical vapor deposition (PE-CVD). The effects of bias voltage and deposition pressure on the films’ structure and properties were investigated. The Raman spectra of the films revealed features typical of G and D bands, indicating the formation of a DLC phase. The results demonstrate that the sp3 carbon fraction or the so-called diamond-like character of the DLC films increased with increasing bias voltage. Moreover, an increase in the bias voltage resulted in a decrease in the film thickness from 800 to 200 nm. Also, the DLC films prepared at a higher deposition pressure showed a higher fraction of sp2-bonded carbon – that is, graphitic domains. Furthermore, it was found that the variation in the bias voltage and deposition pressure also affected the internal stress values of the DLC films in a way that they increased from 1 to 11 GPa when the bias voltage was increased from 475 to 675 V. The effectiveness of DLC films formed on the steel substrates can pave the way for developing a new class of advanced materials to enhance the performance of stainless steel for biomedical applications.