Synthesis of protonated chitosan flakes for the removal of vanadium(III, IV and V) oxyanions from aqueous solutions

Odor Fingerprinting of Chitosan and Source Identification of Commercial Chitosan: HS-GC-IMS, Multivariate Statistical Analysis, and Tracing Path Study

Chitosan samples were prepared from the shells of marine animals (crab and shrimp) and the cell walls of fungi (agaricus bisporus and aspergillus niger). Fourier-transform infrared spectroscopy (FT-IR) was used to detect their molecular structures, while headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) was employed to analyze their odor composition. A total of 220 volatile organic compounds (VOCs), including esters, ketones, aldehydes, etc., were identified as the odor fingerprinting components of chitosan for the first time. A principal component analysis (PCA) revealed that chitosan could be effectively identified and classified based on its characteristic VOCs. The sum of the first three principal components explained 87% of the total variance in original information. An orthogonal partial least squares discrimination analysis (OPLS-DA) model was established for tracing and source identification purposes, demonstrating excellent performance with fitting indices R2X = 0.866, R2Y = 0.996, Q2 = 0.989 for independent variable fitting and model prediction accuracy, respectively. By utilizing OPLS-DA modeling along with a heatmap-based tracing path study, it was found that 29 VOCs significantly contributed to marine chitosan at a significance level of VIP > 1.00 (p < 0.05), whereas another set of 20 VOCs specifically associated with fungi chitosan exhibited notable contributions to its odor profile. These findings present a novel method for identifying commercial chitosan sources, which can be applied to ensure biological safety in practical applications.

Recent advances in removal of inorganic anions from water by chitosan-based composites: A comprehensive review

Chitosan is a modified natural carbohydrate polymer that has been found in the exoskeletons of crustaceans (e.g., lobsters, shrimps, krill, barnacles, crayfish, etc.), mollusks (octopus, oysters, squids, snails), algae (diatoms, brown algae, green algae), insects (silkworms, beetles, scorpions), and the cell walls of fungi (such as Ascomycetes, Basidiomycetes, and Phycomycetes; for example, Aspergillus niger and Penicillium notatum). However, it is mostly acquired from marine crustaceans such as shrimp shells. Chitosan-based composites often present superior chemical, physical, and mechanical properties compared to single chitosan by incorporating the benefits of both counterparts in the nanocomposites. The tunable surface chemistry, abundant surface-active sites, facilitation synthesize and functionalization, good recyclability, and economic viability make the chitosan-based materials potential adsorbents for effective and fast removal of a broad range of inorganic anions. This article reviews the different types of inorganic anions and their effects on the environment and human health. The development of the chitosan-based composites synthesis, the various parameters like initial concentration, pH, adsorbent dosage, temperature, the mechanism of adsorption, and regeneration of adsorbents are discussed in detail. Finally, the prospects and technical challenges are emphasized to improve the performance of chitosan-based composites in actual applications on a pilot or industrial scale.

Facet-Dependent Atomic Distances Shape Vanadate Adsorption Complexes on Hematite Nanocrystals

The environmental fate of vanadate (V(V)) is significantly influenced by iron oxide nanocrystals through adsorption. Nevertheless, the underlying driving force controlling V(V) adsorption on hematite (Fe2O3) facets is poorly understood. Herein, V(V) adsorption on the {001}, {110}, and {214} Fe2O3 facets was explored using batch adsorption experiments, spectroscopic studies, and density functional theory (DFT) calculations. Adsorption experiments suggested that the order of V(V) adsorption capacity followed {001} > {110} > {214}. However, the affinity of V(V) to the {001} facet was the weakest, as evidenced by its least resistance to phosphate and sulfate competition. Our extended X-ray absorption fine structure (EXAFS) study indicated the formation of the inner-sphere monodentate mononuclear (1V) complex on the {001} facet and bidentate corner-sharing (2C) complexes on the {110} and {214} facets. Density functional theory (DFT) calculations showed the 1V complex is preferable when the adjacent Fe-Fe atomic distance is significantly larger than the O-O atomic distance of V(V). Otherwise, the 2C complex is formed if the distance is comparable. This determining factor in surface complex formation can be safely extended to other oxyanions that the compatibility in the atomic distance of Fe-Fe on Fe2O3 facets and O-O in oxyanions shapes the surface complex. The molecular-level understanding of the facet-dependent adsorption mechanism provides the basis for the design and application of oxyanion adsorbents.

Efficient Vanadate Removal by Mg-Fe-Ti Layered Double Hydroxide

A series of novel layered double hydroxides (Mg-Fe-Ti-LDHs) containing Mg2+, Fe3+ and Ti4+ were prepared. The adsorption performance of Mg-Fe-Ti-LDHs on vanadate in aqueous solution was investigated and the effects of various factors on the adsorption process were examined, including initial vanadate concentration, adsorbent dosage, contact time, solution pH and coexisting ions. A preliminary discussion of the adsorption mechanism of vanadate was also presented. Results show that the adsorption efficiency of vanadate increased with the introduction of Ti4+ into the laminate of LDHs materials. The adsorption capacity of the materials also differed for different anion intercalated layers, and the Mg-Fe-Ti-LDHs with Cl− intercalation showed higher vanadate removal compared to the CO32− intercalated layer. Furthermore, Mg-Fe-Ti-CLDH showed higher vanadate removal compared to pre-calcination. The adsorption experimental data of vanadate on Mg-Fe-Ti-LDHs were consistent with the Langmuir adsorption isotherm model and the adsorption kinetics followed a pseudo-second order kinetic model. The pH of the solution significantly affected the vanadate removal efficiency. Meanwhile, coexisting ions PO43−, SO42− and NO3− exerted a significant influence on vanadate adsorption, the magnitude of the influence was related to the valence state of the coexisting anions. The possible adsorption mechanisms can be attributed to ion exchange and layered ligand exchange processes. The good adsorption capacity of Mg-Fe-Ti-LDHs on vanadate broadens the application area of functional materials of LDHs.

Application of Ion Exchangers with the N-Methyl-D-Glucamine Groups in the V(V) Ions Adsorption Process

The adsorption capacities of ion exchangers with N-methyl-D-glucamine (NMDG) groups (Amberlite IRA 743, Lewatit MK 51, Purolite S110 and Purolite S108) relative to V(V) ions were tested in a batch system, taking into account the influence of various parameters, such as the adsorbent mass (0.05-0.20 g), phase contact time (1-240 min), initial concentration (10-150 mg/L), and temperature (293-333 K), as well as in a column system where the variable operating parameters were initial concentration (50, 100 mg/L), bed volume (10, 100 mL) and flow rate (0.6, 6 mL/min). Pseudo-first order, pseudo-second order, intraparticle diffusion and Boyd models were used to describe the kinetic studies. The best fit was obtained for the pseudo-second order model. The Langmuir, Freundlich and Temkin adsorption models were used to describe the equilibrium data to acquire better knowledge about the adsorption mechanism. The thermodynamic parameters were also calculated, which showed that the studied processes are endothermic, spontaneous and thermodynamically favorable. The physicochemical properties of the ion exchangers were characterized by nitrogen adsorption/desorption analyses, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray photo electron spectroscopy (XPS). The point of zero charge (pH_PZC) was also determined.

On the Potential of a Poly(vinylidenefluoride-co-hexafluoropropylene) Polymer Inclusion Membrane Containing Aliquat® 336 and Dibutyl Phthalate for V(V) Extraction from Sulfate Solutions

A polymer inclusion membrane (PIM) composed of 50 wt% base polymer poly(vinylidenefluoride-co-hexafluoropropylene), 40 wt% extractant Aliquat^® 336, and 10 wt% dibutyl phthalate as plasticizer/modifier provided the efficient extraction of vanadium(V) (initial concentration 50 mg L⁻¹) from 0.1 M sulfate solutions (pH 2.5). The average mass and thickness of the PIMs (diameter 3.5 cm) were 0.057 g and 46 μm, respectively. It was suggested that V(V) was extracted as VO₂SO₄⁻ via an anion exchange mechanism. The maximum PIM capacity was estimated to be ~56 mg of V(V)/g for the PIM. Quantitative back-extraction was achieved with a 50 mL solution of 6 M H₂SO₄/1 v/v% of H₂O₂. It was assumed that the back-extraction process involved the oxidation of VO₂⁺ to VO(O₂)⁺ by H₂O₂. The newly developed PIM, with the optimized composition mentioned above, exhibited an excellent selectivity for V(V) in the presence of metallic species present in digests of spent alumina hydrodesulfurization catalysts. Co-extraction of Mo(VI) with V(V) was eliminated by its selective extraction at pH 1.1. Characterization of the optimized PIM was performed by contact angle measurements, atomic-force microscopy, energy dispersive X-ray spectroscopy, thermogravimetric analysis/derivatives thermogravimetric analysis and stress–strain measurements. Replacement of dibutyl phthalate with 2-nitrophenyloctyl ether improved the stability of the studied PIMs.

Recent advances in removal techniques of vanadium from water: A comprehensive review

In recent years, with the development of economy and industry, water contaminated with heavy metal has become a global environmental problem. Vanadium (V) is an emerging contaminant reported in wastewater along with the increasing mining, smelting and recovering of vanadium ores and application in many fields as a significant national strategy resource. The increasing attention has been paid to the separations of V from water due to its potential toxic to animals and human beings. In the present study, the most common V removal techniques including adsorption, microbiological treatment, chemical precipitation, solvent extraction, electrokinetic remediation, photocatalysis, coagulation and membrane filtration are presented with discussion of their advantages, limitations and the recent achievements. Several major influencing factors and mechanisms of various processes have been briefly analyzed. Some research perspectives are proposed for improving the capacities to remove V from water. The core objective of this review is to provide comprehensive information or database for the superior approach for V removal.

A Review of Adsorbents for Heavy Metal Decontamination: Growing Approach to Wastewater Treatment

Heavy metal is released from many industries into water. Before the industrial wastewater is discharged, the contamination level should be reduced to meet the recommended level as prescribed by the local laws of a country. They may be poisonous or cancerous in origin. Their presence does not only damage people, but also animals and vegetation because of their mobility, toxicity, and non-biodegradability into aquatic ecosystems. The review comprehensively discusses the progress made by various adsorbents such as natural materials, synthetic, agricultural, biopolymers, and commercial for extraction of the metal ions such as Ni2+, Cu2+, Pb2+, Cd2+, As2+ and Zn2+ along with their adsorption mechanisms. The adsorption isotherm indicates the relation between the amount adsorbed by the adsorbent and the concentration. The Freundlich isotherm explains the effective physical adsorption of the solute particle from the solution on the adsorbent and Langmuir isotherm gives an idea about the effect of various factors on the adsorption process. The adsorption kinetics data provide valuable insights into the reaction pathways, the mechanism of the sorption reaction, and solute uptake. The pseudo-first-order and pseudo-second-order models were applied to describe the sorption kinetics. The presented information can be used for the development of bio-based water treatment strategies.

Development of functional lignin-based spherical particles for the removal of vanadium(V) from an aqueous system

A new type of functional lignin-based spherical particles (L-CTAB) prepared with the use of hexadecyltrimethylammonium bromide (CTAB) was applied as an effective biosorbent for removing vanadium(V) ions. The porous structure, characteristic functional groups, electrokinetic stability, morphology and size of the L-CTAB particles were examined. The conditions of removal were also investigated, including pH (2-12), sorbent mass (0.1-0.5 g), concentration (10-100 mg/dm3), phase contact time (1-240 min) and temperature (293-333 K). At pH 5.0 the maximum sorption percentage (%S) of V(V) was 45%, while at pH 2.0 it was 32%. The maximum sorption capacity of V(V) for L-CTAB was found to be 10.79 mg/g. The kinetic data indicate that the sorption followed the pseudo-second-order and film diffusion models. Sorption equilibrium for V(V) ions removal by L-CTAB was reached after 60 min at the initial concentrations 10 and 50 mg/dm³. It has been shown that the adsorption of V(V) ions on the surface of L-CTAB is a heterogeneous, endothermic and spontaneous reaction, as evidenced by the calculated values of thermodynamic parameters - free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°) - for the tested systems at different temperatures. HCl solutions, used as an L-CTAB regeneration agent, quantitatively eluted V(V) ions.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

A sandwich model of Cr(VI) adsorption and detoxification by Fenton modified chitosan

The Fenton reaction has the advantages of short reaction time, low cost, no toxicity, and straightforward application and control. The Fenton reaction generates highly reactive HO•, which has been applied effectively. However, the effect of the generated Fe³⁺ has not been investigated widely. In this study, the Fenton reaction was used to improve the Cr(VI) adsorption and detoxification capacities of chitosan. After the Fenton modification, chitosan efficiently adsorbed Cr(VI) and transformed it into the less toxic Cr(III) in a wide pH range as a result of layer formation, which was described by a sandwich model. The adsorption of Cr(VI) onto the Fenton modified chitosan was in good agreement with the Freundlich adsorption model, and the adsorption capacity exceeded 120 mg/g. During the Fenton reaction, H₂ O₂ and HO• with high oxidative activity broke the hydrogen bonds in the chitosan structure, resulting in the release of free amine groups for Fe³⁺ to form metal-binding biopolymers. The distance between the chitosan polymers increased, and additional adsorption sites were created. HCrO₄ ^- entered the gap between the chitosan polymer and was adsorbed on the newly created adsorption sites. The sandwich adsorption model indicated that the Fenton modified chitosan provided a high concentration of active sites for Cr(VI) capture and detoxification. PRACTITIONER POINTS: Fenton reaction was used to improve the adsorption ability of chitosan. The formed Fe³⁺ in Fenton reaction was utilized. HO· broke the hydrogen bonds and Fe³⁺ ions chelated with chitosan in modification. Cr(VI) could be adsorbed and reduced efficiently by Fenton modified chitosan. The Fenton modified chitosan provided a high concentration of active sites for Cr(VI) capture and detoxification.

Ultrasonic-assisted synthesis of SiO2 nanoparticles and SiO2/chitosan/Fe nanocomposite and their application for vanadium adsorption from aqueous solution

The husk of brown rice, as a source of silica, was applied to synthesize natural SiO₂ nanoparticles via sonochemical method. SiO₂/CH/Fe nanocomposite was synthesized from SiO₂, chitosan (prepared from shrimp shells via sonochemical method), and iron functional groups and detected using BET, EDX-SEM, and FTIR techniques. These natural-based nanostructures (SiO₂ and SiO₂/CH/Fe) have been applied for vanadium adsorption. The influences of initial pH, initial concentration, and adsorption time were studied via a batch process. The analysis of the kinetics data indicated that the chemical adsorption is predominant. The analysis of the equilibrium data indicated the single layer and exothermic adsorption process. The mono-layer adsorption capacity of SiO₂/CH/Fe was 199.540 mg g^-1. The performance of SiO₂/CH/Fe in a continuous column system was investigated in four adsorption and desorption cycles. Results showed that SiO₂/CH/Fe nanocomposite synthesized with the sonochemical method is a candidate with high adsorption ability for use as an industrial adsorbent.

Starch, cellulose, pectin, gum, alginate, chitin and chitosan derived (nano)materials for sustainable water treatment: A review

Natural biopolymers, polymeric organic molecules produced by living organisms and/or renewable resources, are considered greener, sustainable, and eco-friendly materials. Natural polysaccharides comprising cellulose, chitin/chitosan, starch, gum, alginate, and pectin are sustainable materials owing to their outstanding structural features, abundant availability, and nontoxicity, ease of modification, biocompatibility, and promissing potentials. Plentiful polysaccharides have been utilized for making assorted (nano)catalysts in recent years; fabrication of polysaccharides-supported metal/metal oxide (nano)materials is one of the effective strategies in nanotechnology. Water is one of the world's foremost environmental stress concerns. Nanomaterial-adorned polysaccharides-based entities have functioned as novel and more efficient (nano)catalysts or sorbents in eliminating an array of aqueous pollutants and contaminants, including ionic metals and organic/inorganic pollutants from wastewater. This review encompasses recent advancements, trends and challenges for natural biopolymers assembled from renewable resources for exploitation in the production of starch, cellulose, pectin, gum, alginate, chitin and chitosan-derived (nano)materials.

Metal ion removal using waste byssus from aquaculture

Byssus is a thread-like seafood waste that has a natural high efficiency in anchoring many metal ions thanks to its richness of diverse functional groups. It also has structural stability in extreme chemical, physical and mechanical conditions. The combination of these properties, absent in other waste materials, has novelty suggested its use as matrix for water remediation. Thus, pristine byssus, upon de-metalation, was studied to remove metal ions from ideal solutions at pH 4 and 7, as model chemical systems of industrial and environmental polluted waters, respectively. The byssus matrix's uptake of metal ions was determined by ICP-OES and its surface microstructure investigated by SEM. The results showed that the byssus matrix excellently uptakes metal ions slightly reorganizing its surface micro-structure. As example of its efficiency: 50 mg of byssus absorbed 21.7 mg·g-1 of Cd2+ from a 10 mM solution at pH 7. The adsorption isotherm models of Freundlich and Langmuir were mainly used to describe the system at pH 7 and pH 4, respectively. In conclusion, we showed that the byssus, a waste material that is an environmental issue, has the potential to purify polluted industrial and environmental waters from metal ions.

Modular Chitosan-Based Adsorbents for Tunable Uptake of Sulfate from Water

The context of this study responds to the need for sorbent technology development to address the controlled removal of inorganic sulfate (SO₄²⁻) from saline water and the promising potential of chitosan as a carrier system for organosulfates in pharmaceutical and nutraceutical applications. This study aims to address the controlled removal of sulfate using chitosan as a sustainable biopolymer platform, where a modular synthetic approach was used for chitosan bead preparation that displays tunable sulfate uptake. The beads were prepared via phase-inversion synthesis, followed by cross-linking with glutaraldehyde, and impregnation of Ca²⁺ ions. The sulfate adsorption properties of the beads were studied at pH 5 and variable sulfate levels (50–1000 ppm), where beads with low cross-linking showed moderate sulfate uptake (35 mg/g), while cross-linked beads imbibed with Ca²⁺ had greater sulfate adsorption (140 mg/g). Bead stability, adsorption properties, and the point-of-zero charge (PZC) from 6.5 to 6.8 were found to depend on the cross-linking ratio and the presence of Ca²⁺. The beads were regenerated over multiple adsorption-desorption cycles to demonstrate the favorable uptake properties and bead stability. This study contributes to the development of chitosan-based adsorbent technology via a modular materials design strategy for the controlled removal of sulfate. The results of this study are relevant to diverse pharmaceutical and nutraceutical applications that range from the controlled removal of dextran sulfate from water to the controlled release of chondroitin sulfate.

Enhanced Arsenic(V) Removal on an Iron-Based Sorbent Modified by Lanthanum(III)

Modification of a commercial iron oxide ion exchanger (Arsen X^np) was carried out to enhance the removal of arsenic(V) ions. The modification consisted of the adsorption of lanthanum(III) ions on the Arsen X^np surface. After adsorption, the material was dried at 313 K to obtain the modified ion exchanger Arsen X^np-La(III). The modification process itself was tested for optimal pH, kinetics, and equilibrium adsorption isotherm study. Accurate sorbent characteristics were made using, among others, SEM, FTIR, and nitrogen adsorption/desorption isotherms. Then, various tests were carried out to compare the adsorption properties of the modified and unmodified material. It turned out that the tested material was able to completely remove arsenic from an aqueous solution with an initial concentration of up to 50 mg/dm³. Without modification, it was not possible to reach the WHO recommended 10 μg/dm³ arsenic limit even at an initial concentration of 25 mg/dm³. Moreover, the maximum sorption capacity increased from 22.37 to 61.97 mg/g after modification (3 times greater than before modification). It is worth noting that the process of removing arsenic on Arsen X^np-La(III) is fast—equilibrium is reached after about 120 min. Under almost neutral conditions, precipitation and adsorption can be the main mechanisms of As(V) removal. After modification, the removal capacity was enhanced by the co-precipitation and adsorption by exchange of the OH– group with arsenic ions. Such La(III) based adsorbent can be successfully applied in wastewater purification and displays superior performance for removing arsenic.

Removal of V(V) From Solution Using a Silica-Supported Primary Amine Resin: Batch Studies, Experimental Analysis, and Mathematical Modeling

Every year, a large quantity of vanadium-containing wastewater is discharged from industrial factories, resulting in severe environmental problems. In particular, V(V) is recognized as a potentially hazardous contaminant due to its high mobility and toxicity, and it has received considerable attention. In this study, a silica-supported primary amine resin (SiPAR) was prepared by in-situ polymerization, and the V(V) adsorption from the solution was examined. The as-prepared resin exhibited fast adsorption kinetics, and it could attain an equilibrium within 90 min for the V(V) solution concentration of 100 mg/L at an optimum pH of 4, whereas the commercial D302 resin required a treatment time of more than 3 h under the same conditions. Furthermore, the maximum adsorption capacity of the resin under optimum conditions for V(V) was calculated to be 70.57 mg/g. In addition, the kinetics and isotherm data were satisfactorily elucidated with the pseudo-second-order kinetics and Redlich–Peterson models, respectively. The silica-based resin exhibited an excellent selectivity for V(V), and the removal efficiency exceeded 97% in the presence of competitive anions at 100 mmol/L concentrations. The film mass-transfer coefficient (k_f) and V(V) pore diffusivity (D_p) onto the resins were estimated by mathematical modeling. In summary, this study provided a potential adsorbent for the efficient removal of V(V) from wastewater.

Removal of Hazardous Oxyanions from the Environment Using Metal-Oxide-Based Materials

Scientific development has increased the awareness of water pollutant forms and has reawakened the need for its effective purification. Oxyanions are created by a variety of redox-sensitive metals and metalloids. These species are harmful to living matter due to their toxicity, nondegradibility, and mobility in aquatic environments. Among a variety of water treatment techniques, adsorption is one of the simplest, cheapest, and most effective. Since metal-oxide-based adsorbents poses a variety of functional groups onto their surface, they were widely applied in ions sorption. In this paper adsorption of harmful oxyanions by metal oxide-based materials according to literature survey was studied. Characteristic of oxyanions originating from As, V, B, W and Mo, their probable adsorption mechanisms and comparison of their sorption affinity for metal-oxide-based materials such as iron oxides, aluminum oxides, titanium dioxide, manganium dioxide, and various oxide minerals and their combinations are presented in this paper.

Development, modification, and application of low-cost and available biochar derived from corn straw for the removal of vanadium(v) from aqueous solution and real contaminated groundwater

In this work, a low-cost and available material for use as a permeable reactive barrier (PRB) to prevent vanadium in groundwater from leaking into river water was developed. Three modified biochars were prepared from available corn straw pretreated with CsCl, Zn(ii), and Zr(iv) to enhance ion exchange capacity (IEC) and specific surface area, and were designated as Cs-BC, Zn-BC, and Zr-BC, respectively. These materials were characterized via IEC, N₂ adsorption–desorption, Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analyses. The Langmuir isotherm model could be applied for the best fit for the adsorption data of Cs-BC and Zr-BC, indicating that vanadium(v) sorption occurred in a monolayer. The vanadium(v) adsorption capacities of Cs-BC, Zn-BC, and Zr-BC were 41.07, 28.46, and 23.84 mg g⁻¹, respectively, which were 3.22–5.55 times higher than that of commercial activated carbon (AC) (7.40 mg g⁻¹), probably because of their higher IECs and specific surface areas after modification. In addition, no heavy metal leaching was found from the modified biochars during the adsorption processes when pH > 2. According to the FTIR and XRD patterns, the adsorption mechanism of Cs-BC and Zr-BC was ion exchange, whereas for Zn-BC, it was mainly surface precipitation and electrostatic attraction. The adsorption of vanadium(v) onto the modified biochars was independent of pH in the range of 4.0 to 8.0. Furthermore, the removal efficiency of the vanadium(v) in real contaminated groundwater from the catchment of the Chaobei River by Zn-BC reached 100% at a dose of 4 g L⁻¹. Hence, modified biochars are promising PRB filling materials for removing vanadium(v) from contaminated groundwater.

In this work, a low-cost and available material for use as a permeable reactive barrier (PRB) to prevent vanadium in groundwater from leaking into river water was developed.

Removal of Arsenic (V) from Aqueous Solutions Using Chitosan-Red Scoria and Chitosan-Pumice Blends

In different regions across the globe, elevated arsenic contents in the groundwater constitute a major health problem. In this work, a biopolymer chitosan has been blended with volcanic rocks (red scoria and pumice) for arsenic (V) removal. The effect of three blending ratios of chitosan and volcanic rocks (1:2, 1:5 and 1:10) on arsenic removal has been studied. The optimal blending ratio was 1:5 (chitosan: volcanic rocks) with maximum adsorption capacity of 0.72 mg/g and 0.71 mg/g for chitosan: red scoria (Ch–Rs) and chitosan: pumice (Ch–Pu), respectively. The experimental adsorption data fitted well a Langmuir isotherm (R² > 0.99) and followed pseudo-second-order kinetics. The high stability of the materials and their high arsenic (V) removal efficiency (~93%) in a wide pH range (4 to 10) are useful for real field applications. Moreover, the blends could be regenerated using 0.05 M NaOH and used for several cycles without losing their original arsenic removal efficiency. The results of the study demonstrate that chitosan-volcanic rock blends should be further explored as a potential sustainable solution for removal of arsenic (V) from water.

Vanadium removal and recovery from bauxite residue leachates by ion exchange

Bauxite residue is an important by-product of the alumina industry, and current management practices do not allow their full valorisation, especially with regard to the recovery of critical metals. This work aims to test the efficiency of ion exchange resins for vanadium (V) removal and recovery from bauxite residue leachates at alkaline pH (11.5 and 13). As an environmental pollutant, removal of V from leachates may be an obligation of bauxite residue disposal areas (BRDA) long-term management requirements. Vanadium removal from the leachate can be coupled with the recovery, and potentially can be used to offset long-term legacy treatment costs in legacy sites. Kinetics studies were performed to understand the adsorption process. The rate kinetics for the V adsorption was consistent with the pseudo-first-order kinetic model, with a higher adsorption rate for pH 11.5 (1.2 min^-1). Adsorption isotherm data fitted better to Freundlich equations than to the Langmuir model. The maximum adsorption capacity (Langmuir value q _max) was greatest for pH 13 (9.8 mg V g^-1 resin). In column tests, breakthrough was reached at 70 bed volumes with the red mud leachate at pH 13, while no breakthrough was achieved with the effluent at pH 11.5. In regeneration, 42 and 76 % of V were eluted from the resin with 2 M NaOH from the red mud leachate at pH 13 and 11.5, respectively. Further optimization will be needed to upscale the treatment.

Performance comparison of activated carbon and ferric oxide-hydroxide–activated carbon nanocomposite as vanadium(v) ion adsorbents

Recently, a great deal of attention has been paid to water treatment using nanoparticles such as ferric nanoparticles. In this work, a ferric oxide-hydroxide–activated carbon nanocomposite has been used as new adsorbent for vanadium(v) ion.