A novel cyanopropylsilane-functionalized titanium oxide magnetic nanoparticle for the adsorption of nickel and lead ions from industrial wastewater: Equilibrium, kinetic and thermodynamic studies

Synthesis and Characterization of MC/TiO2 NPs Nanocomposite for Removal of Pb2+ and Reuse of Spent Adsorbent for Blood Fingerprint Detection

The removal of toxic heavy metals from wastewater through the use of novel adsorbents is expensive. The challenge arises after the heavy metal is removed by the adsorbent, and the fate of the adsorbent is not taken care of. This may create secondary pollution. The study aimed to prepare mesoporous carbon (MC) from macadamia nutshells coated with titanium dioxide nanoparticles (TiO2 NPs) using a hydrothermal method to remove Pb2+ and to test the effectiveness of reusing the lead-loaded spent adsorbent (Pb2+-MC/TiO2 NP nanocomposite) in blood fingerprint detection. The samples were characterized using SEM, which confirmed spherical and flower-like structures of the nanomaterials, whereas TEM confirmed a particle size of 5 nm. The presence of functional groups such as C and Ti and a crystalline size of 4 nm were confirmed by FTIR and XRD, respectively. The surface area of 1283.822 m2/g for the MC/TiO2 NP nanocomposite was examined by BET. The removal of Pb2+ at pH 4 and the dosage of 1.6 g/L with the highest percentage removal of 98% were analyzed by ICP-OES. The Langmuir isotherm model best fit the experimental data, and the maximum adsorption capacity of the MC/TiO2 NP nanocomposite was 168.919 mg/g. The adsorption followed the pseudo-second-order kinetic model. The ΔH° (-54.783) represented the exothermic nature, and ΔG° (-0.133 to -4.743) indicated that the adsorption process is spontaneous. In the blood fingerprint detection, the fingerprint details were more visible after applying the Pb2+-MC/TiO2 NP nanocomposite than before the application. The reuse application experiments showed that the Pb2+-MC/TiO2 NP nanocomposite might be a useful alternative material for blood fingerprint enhancement when applied on nonporous surfaces, eliminating secondary pollution.

Titanium lanthanum three oxides decorated magnetic graphene oxide for adsorption of lead ions from aqueous media

The current study presents a viable and straightforward method for synthesizing titanium lanthanum three oxide nanoparticles (TiLa) and their decoration onto the ferrous graphene oxide sheets to produce FeGO-TiLa as efficient magnetic adsorbent. Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and vibration sample magnetometer (VSM) were used to evaluate the physical and chemical properties of the produced nanocomposites. The FeGO-TiLa was used to enhance the removal of lead ions from aqueous solution. The FeGO-TiLa nanocomposite exhibited a much higher removal efficiency (93%) for lead ions than pure TiLa nanoparticles (81%) and magnetic graphene oxide (74%). The influence of FeGO-TiLa dosage, contact time, solution pH, solution temperature, and starting quantity on the lead ions was evaluated and adjusted. The investigations demonstrated that a pH 6 with 40 mg adsorbent resulted in >91% removal of lead ions at ambient temperature after 120 min. Isotherm models were used to analyze experimental results, and Langmuir model fitted the data well as compared Freundlich model with a maximum adsorption capacity of 109.89 mg g^-1. Kinetic and studies are performed the lead adsorption over FeGO-TiLa follow pseudo-second-order rate. Langmuir and Free energy suggested the lead ions uptake with FeGO-TiLa was monolayer and physical adsorption mechnaism, respectively. Finally, the FeGO-TiLa nanocompoiste can be used as an alternative adsorbent for water remediation.

Enhanced remediation of lead (II) and cadmium (II) ions from aqueous media using porous magnetic nanocomposites - A comprehensive review on applications and mechanism

Lead and Cadmium, identified as toxic heavy metals, cause significant imbalance in the eco-system due to their tendency to bioaccumulate. Remediation of heavy metals by conventional adsorptive materials suffer demerits related to low efficiency or removal. Among the variety of adsorbent materials used in the adsorption process, metal oxides- and graphene oxide magnetic nanocomposites have gained a considerable attention. The use of nanomaterials may help to reduce this contamination, but after use, they are difficult to remove from water. An added magnetic property to nanomaterials facilitates their retrieval after use. The magnetic properties of these hybrid magnetic nanocomposites, coupled with unique characteristics of organic and inorganic elements, have found extensive application in water treatment technology. Detailed discussion on functionalisation of magnetic nanocomposites and the enhanced performance are presented. Magnetic graphene oxide-covalently functionalized-tryptophan was reported to have the highest adsorption capacity of 766.1 mg/g for remediation of lead (II) ions and graphene oxide exhibited the highest adsorption capacity of 530 mg/g for Cd (II) ions. The adsorption mechanisms for heavy metal ions on the surface of novel adsorbents, particularly lead and cadmium, using magnetic nanocomposites have been explained with reference to the isotherm models studied. The future scope of research in this area of research is proposed.

Magnetic sporopollenin supported polyaniline developed for removal of lead ions from wastewater: Kinetic, isotherm and thermodynamic studies

This study evaluated the synthesis of novel binary functionaladsorbent based on sporopollenin, magnetic nanoparticles, and polyaniline to produce MSP-PANI. The MSP-PANI was applied to enhance uptake of lead ions (Pb²⁺) from wastewater samples. The functionalities, surface morphology, magnetic properties, and elemental composition of the newly synthesized nanocomposite were investigated using Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), vibration sample magnetometer (VSM), and energy-dispersive X-ray spectroscopy (EDX), respectively. The experimental condition for the adsorption process was MSP/PANI ratio 1:1, pH ∼6, adsorbent dosage 40 mg, and contact time 90 min at room temperature. Under the proposed condition, lead ions removal were obtained as 83%, 88% and 95% for MSPE, PANI, and MSP/PANI, respectively. Based on the experimental and predicted data, the adsorption was corresponded to the psudo-second-order (R² = 0.999) kinetics model, and the adsorption equilibrium corresponded to the Langmuir model (R² = 0.996). Langmuir isotherm showed the maximum adsorption capacity of MSP-PANI for lead ions was 163 mg/g and followed the monolayer pattern. Hence, thermodynamic model under Van't Hoff equation suggested that the adsorption mechanism was physio-sorption with endothermic nature. Therefore, this research can help the researchers to use magnetic nanoparticles for lead removal in highly polluted areas.

Removal of lead ions from wastewater using lanthanum sulfide nanoparticle decorated over magnetic graphene oxide

In this study, the new lanthanum sulfide nanoparticle (La₂S₃) was synthesized and incorporated onto magnetic graphene oxide (MGO) sheets surface to produce potential adsorbent (MGO@LaS) for efficient removal of lead ions (Pb²⁺) from wastewater. The synthesized MGO@LaS adsorbent was characterized using Fourier transform infrared spectroscopy, field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. The effective parameters on the adsorption process including solution pH (~5), adsorbent dosage (20 mg), contact time (40 min), initial Pb²⁺ concentration and temperature were studied. The removal efficiency was obtained >95% for lead ions at pH 5 with 20 mg adsorbent. To validate the adsorption rate and mechanism, the kinetic and thermodynamic models were studied based on experimental data. The Langmuir isotherm model was best fitted to initial equilibrium concentration with a maximum adsorption capacity of 123.46 mg/g. This indicated a monolayer adsorption pattern for Pb²⁺ ions over MGO@LaS. The pseudo-second-order as the kinetic model was best fitted to describe the adsorption rate due to high R² > 0.999 as compared first-order. A thermodynamic model suggested a chemisorption and physisorption adsorption mechanism for Pb²⁺ ions uptake into MGO@LaS at different temperatures; ΔG° < -5.99 kJ mol^-1 at 20 °C and ΔG° -18.2 kJ mol^-1 at 45 °C. The obtained results showed that the novel nanocomposite (MGO@LaS) can be used as an alternative adsorbent in wastewater treatment.

Sustainable approaches for nickel removal from wastewater using bacterial biomass and nanocomposite adsorbents: A review

In this article, the nickel (Ni²⁺) ions removal from the wastewater is reviewed. Adsorption is widely used to remove Ni²⁺ ions from waters and wastewaters. The usage of biomass is becoming more common for Ni²⁺ ions removal, while the commercial activated carbon from different agriculture wastes is preferred as an adsorbent for Ni²⁺ ion removal. The present review aimed to organise the available information regarding sustainable approaches for Ni²⁺ ions removal from water and wastewaters. These include adsorption by nanoparticles, bacterial biomass, and activated carbon from agriculture wastes, since they are the most common used for the Ni²⁺ ions removal. The bacterial and agricultural waste adsorbents exhibited high efficiency with a renewable source of biomass for Ni²⁺ ion removal. The biosorption capacity of the Ni²⁺ ions by the bacterial biomass range from 5.7 to 556 mg/g, while ranging from 5.8 to 150 mg/g by the activated carbon from different organic materials. The biosorption capacity of the nanocomposite adsorbents might reach to 400 mg/g. It appeared that the elimination of nickel ions need a selective biomass adsorbent such as the tolerant bacterial cells biomass which acts as a store for Ni²⁺ ion accumulations as a results for the active and passive transportation of the Ni²⁺ ions through the bacterial cell membrane.

Facile auto-combustion synthesis of calcium aluminate nanoparticles for efficient removal of Ni(II) and As(III) ions from wastewater

We herein report the synthesis of monoclinic calcium aluminate (CaAl₂O₄) nanoparticles via a facile auto-combustion method followed by calcination. We performed the auto-combustion method using aluminium nitrate and calcium nitrate as oxidants and different fuels as reductants such as urea, glycine, and a mixture of urea and glycine, with various fuel-to-oxidant equivalence ratios (Φc). Then, the combusted samples were calcined at different temperatures; 600 and 800 °C. The products were characterized by means of X-ray diffraction, Fourier transform infrared spectroscopy, thermo-gravimetric analysis, field-emission scanning electron microscope, and high-resolution transmission electron microscope. CaAl₂O₄ nanoparticles with an average crystallite size of 40.4, 38.8, and 33.7 nm were obtained after calcination at 800 °C using the aforementioned fuels, respectively. TEM images revealed that CaAl₂O₄ nanoparticles tend to form partially sintered aggregates owing to the high thermal treatment temperature, so they have non-uniform shapes. The produced CaAl₂O₄ nanoparticles exhibited good absorptivity toward Ni(II) and As(III) ions form aqueous media. The maximum sorption capacities (q_m) of CaAl₂O₄ for the removal of Ni(II) and As(III) were found to be 58.73 and 43.9 mg.g^-1, at pH 7 and 5, respectively. The equilibrium isotherms and adsorption kinetics studies revealed that the adsorption data fitted well Freundlich isotherm and pseudo-second-order models, respectively. Besides, the adsorption of Ni(II) and As(III) ions on CaAl₂O₄ nanoparticles is physisorption. Overall, the obtained results indicated that calcium aluminate nano-adsorbent is a good candidate for the removal of Ni(II) and As(III) ions from wastewater, due to its high efficiency, stability, and re-usability.

Adsorption of Pb(II) from Water onto ZnO, TiO2, and Al2O3: Process Study, Adsorption Behaviour, and Thermodynamics

This study is aimed at comparing the use of zinc oxide (ZnO), titanium dioxide (TiO2), and aluminium oxide (Al2O3) for removing lead ions from water through adsorption. The point of zero charge was obtained for ZnO, TiO2, and Al2O3 and was found to be 7.3, 7.1, and 9.0, respectively. The effect of pH, adsorbent dose, contact time, initial concentrations, and temperature was investigated in batch experiments. The optimal conditions obtained were 7, 2 g/L, 120 mins, 100 ppm, and 41°C, respectively, where the optimal removal efficiencies were 98.43%, 96.45%, and 85.50% for ZnO, TiO2, and Al2O3, respectively. In addition, analyses of adsorption kinetics, mechanisms, isotherms, and thermodynamics were performed. The adsorption kinetics of Pb(II) were compared to popular models, and it was found that the pseudo-second-order (PSO) model best fitted the Pb(II) uptake for all adsorbents at correlation coefficient ( $R^2\ge 0.96$ ). The adsorption isotherms of Pb(II) were also compared to popular models, and it was found that the Pb(II) uptake by TiO2 and ZnO was well-described by the Langmuir model ( $R^2\ge 0.96$ ) with maximum adsorption capacities of 55.04 and 58.88 mg/g, respectively. On the other hand, the behaviour of Al2O3 is described more accurately by the Dubinin-Radushkevich (D-R) model ( $R^2=0.96$ ), and the maximum adsorption capacity was 53.64 mg/g. The isotherm analysis proved that the limiting step of the adsorption process is the film diffusion mechanism. In addition, studying the heat of adsorption of Pb(II) implied that the adsorption is endothermic due to the positive values of enthalpy ( $\Delta H^{°}\ge 30$ ) for all adsorbents. The absorbents were characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) to study the morphology of surfaces and the chemical characterization of the adsorbents to ensure that adsorption is achieved. ZnO showed better performance for the uptake of lead followed by TiO2 then Al2O3.

Natural, low-cost adsorbents for toxic Pb(II) ion sequestration from (waste)water: A state-of-the-art review

Pb(II) ions is an inorganic pollutant that is present in the environment. Its presence affects both human health and ecosystem. Economically, amongst many wastewater treatment approaches, adsorption is both cheap and environmentally friendly for removing Pb(II) ion from contaminated water. In this state of the art review, about 227 research and review based publications on adsorption-based studies between 1989 and 2021, which have used various materials as adsorbents of Pb (II) ions, were selected and reviewed for more evaluation. A number of adsorbents which have been reported in these literatures for the adsorption of Pb(II) ion are agrobased, modified agrobased, clay minerals, modified/nanocomposite clay minerals, silica-based, zeolite-based and chitosan-based adsorbents, respectively. The adsorption potential of the adsorbents is exhibited under optimum experimental conditions. The unmodified and modified agro based adsorbents were shown to exhibit the greatest Pb(II) adsorption capacity, with great potential for further exploration, compared to the others afore-listed. The effects of operating parameters such as pH, initial metal ion concentration, adsorbent dose and reaction time are discussed. Furthermore, in order to comprehend the nature of adsorption process between the adsorbent and contaminant (Pb(II)), thermodynamic analyses of adsorption systems are intensively described. All these discussions revealed the applicability of adsorption process for toxic Pb(II) ions removal with respect to wastewater treatment techniques. The review concludes by commenting on the various adsorbents' adsorption capacity and proposes some studies that should also be considered in future works.

Functionalized Magnetic Nanomaterials in Agricultural Applications

The development of functional nanomaterials exhibiting cost-effectiveness, biocompatibility and biodegradability in the form of nanoadditives, nanofertilizers, nanosensors, nanopesticides and herbicides, etc., has attracted considerable attention in the field of agriculture. Such nanomaterials have demonstrated the ability to increase crop production, enable the efficient and targeted delivery of agrochemicals and nutrients, enhance plant resistance to various stress factors and act as nanosensors for the detection of various pollutants, plant diseases and insufficient plant nutrition. Among others, functional magnetic nanomaterials based on iron, iron oxide, cobalt, cobalt and nickel ferrite nanoparticles, etc., are currently being investigated in agricultural applications due to their unique and tunable magnetic properties, the existing versatility with regard to their (bio)functionalization, and in some cases, their inherent ability to increase crop yield. This review article provides an up-to-date appraisal of functionalized magnetic nanomaterials being explored in the agricultural sector.

Preparation of green synthesized copper oxide nanoparticles for efficient removal of lead from wastewaters

Green synthesis is a clean and eco-friendly process in which metal nanoparticles can be produced by the reaction between a metal salt solution and plant organ extract. In the present study, three copper oxide nanoparticles were green synthesized from the leaf extracts of astragalus (Astragalus membranaceus), rosemary (Salvia rosmarinus), and mallow (Malva sylvestris) as predominant plant cover in the study area was characterized. The effectiveness of three green synthesized nanoparticles in the adsorption of lead ions from polluted water was studied. According to the results, the removal efficiencies of the copper oxide nanoparticles synthesized from astragalus (A-CuO-NPs), rosemary (R-CuO-NPs), and mallow leaf extract (M-CuO-NPs) especially at the highest initial concentration of lead (1.5 mM), were 88.4%, 84.9%, and 69.6%, respectively. Probably due to the smooth morphology and more uniform configuration of the M-CuO-NPs, the changes between equilibrium adsorption (q_e) and equilibrium concentration (C_e) were more regular than those of the A-CuO-NPs and R-CuO-NPs. Therefore, the best fit of the data to the Langmuir and Freundlich isotherms belonged to the adsorption of lead onto the M-CuO-NPs. According to the results reported herein, the copper oxide nanoparticles synthesized from different plant covers are efficient adsorption agents for lead from wastewaters solution.

A green deep eutectic solvent modified magnetic titanium dioxide nanoparticles for the solid-phase extraction of chymotrypsin

Magnetic titanium dioxide nanoparticles modified with green deep eutectic solvent (DES) composed of choline chloride (ChCl) and xylitol (Xyl) (Fe₃O₄@TiO₂@[ChCl][Xyl]) were synthesized and applied to the solid-phase extraction(MSPE) of chymotrypsin (Chy). The physicochemical properties and morphology of Fe₃O₄@TiO₂@[ChCl][Xyl] was characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), Zeta potential, X-ray diffraction (XRD), vibrating sample magnetometer (VSM) and transmission electron microscope (TEM). The experiment parameters such as initial concentration of Chy, extraction time, pH value, ionic strength, extraction temperature and sample matrix were effectively optimized. Under the optimal experimental conditions, the extraction capacity of Fe₃O₄@TiO₂@[ChCl][Xyl] obtained a significantly improvement after the modification of Fe₃O₄@TiO₂ nanoparticles by [ChCl][Xyl], and reached up to 347.8 mg g^-1. In the elution experiment, 10% sodium dodecyl sulfate-acetic acid (SDS-HAc) was used as eluent, achieving an elution rate of 85.9% for the Chy on Fe₃O₄@TiO₂@[ChCl][Xyl]. And the Fe₃O₄@TiO₂@[ChCl][Xyl] still maintained a good extraction capacity for Chy after six times of reuse. The application result in the extraction of Chy from porcine pancreas crude extract showed a good practical application ability for Chy extraction. All the results indicated that the synthesized Fe₃O₄@TiO₂@[ChCl][Xyl] has good application potential in the extraction of biomolecular molecules such as protein.

Magnetic nanoadsorbents for micropollutant removal in real water treatment: a review

Pure water will become a golden resource in the context of the rising pollution, climate change and the recycling economy, calling for advanced purification methods such as the use of nanostructured adsorbents. However, coming up with an ideal nanoadsorbent for micropollutant removal is a real challenge because nanoadsorbents, which demonstrate very good performances at laboratory scale, do not necessarily have suitable properties in in full-scale water purification and wastewater treatment systems. Here, magnetic nanoadsorbents appear promising because they can be easily separated from the slurry phase into a denser sludge phase by applying a magnetic field. Yet, there are only few examples of large-scale use of magnetic adsorbents for water purification and wastewater treatment. Here, we review magnetic nanoadsorbents for the removal of micropollutants, and we explain the integration of magnetic separation in the existing treatment plants. We found that the use of magnetic nanoadsorbents is an effective option in water treatment, but lacks maturity in full-scale water treatment facilities. The concentrations of magnetic nanoadsorbents in final effluents can be controlled by using magnetic separation, thus minimizing the ecotoxicicological impact. Academia and the water industry should better collaborate to integrate magnetic separation in full-scale water purification and wastewater treatment plants.

Nitrile-calixarene grafted magnetic graphene oxide for removal of arsenic from aqueous media: Isotherm, kinetic and thermodynamic studies

A novel adsorbent was developed based on nitrile functionalized calix [4]arene grafted onto magnetic graphene oxide (N-Calix-MGO) for remediation of arsenic (III) ions from aqueous media. The nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The effective parameters on adsorption efficiency such as pH, adsorbent dosage, contact time, initial concentration, and temperature were studied. The adsorption process was provided with a high removal efficiency up to (90%) at pH 6 which followed by IUPAC Type II pattern. The mathematical models of kinetics and isotherm validated the experimental process. The adsorption kinetic is followed pseudo-first-order model with R² > 0.9. The adsorption equilibrium was well fitted on the Freundlich model (R² ∼ 0.96) as compared Langmuir model (R² ∼ 0.75). Hence, the Freundlich model suggested a multilayer sorption pattern with a physisorption mechanism for arsenic (III) uptake ono developed nanocomposite with a sorption capacity of 67 mg/g for arsenic. The Gibbs free energy (ΔG° < -20 kJ/mol) showed As(III) uptake ono N-Calix-MGO nanocomposite was the physical adsorption mechanism.

Magnetite nanoparticles grafted with murexide-terminated polyamidoamine dendrimers for removal of lead (II) from aqueous solution: synthesis, characterization, adsorption and antimicrobial activity studies

In this study, new, efficient, eco-friendly and magnetically separable nanoadsorbents, MNPs-G1-Mu and MNPs-G2-Mu, were successfully prepared by covalently grafting murexide-terminated polyamidoamine dendrimers on 3-aminopropyl functionalized silica-coated magnetite nanoparticles, and used for rapid removal of lead (II) from aqueous medium. After each adsorption process, the supernatant was successfully acquired from reaction mixture by the magnetic separation, and then analyzed by employing ICP-OES. Chemical and physical characterizations of new nanomaterials were confirmed by XRD, FT-IR, SEM, TEM, and VSM. Maximum adsorption capacities (q_m) of both prepared new nanostructured adsorbents were compared with each other and also with some other adsorbents. The kinetic data were appraised by using pseudo-first-order and pseudo-second-order kinetic models. Adsorption isotherms were found to be suitable with both Langmuir and Freundlich isotherm linear equations. The maximum adsorption capacities for MNPs-G1-Mu and MNPs-G2-Mu were calculated as 208.33 mg g^-1 and 232.56 mg g^-1, respectively. Antimicrobial activities of nanoparticles were also examined against various microorganisms by using microdilution method. It was determined that MNPs-G1-Mu, MNPs-G2-Mu and lead (II) adsorbed MNPs-G2-Mu showed good antimicrobial activity against S. aureus ATTC 29213 and C. Parapsilosis ATTC 22019. MNPs-G1-Mu also showed antimicrobial activity against C. albicans ATTC 10231.

Taguchi optimization design of diameter-controlled synthesis of multi walled carbon nanotubes for the adsorption of Pb(II) and Ni(II) from chemical industry wastewater

Herein, Taguchi L₉ orthogonal array was used for the first time to optimize synthesis of diameter-controlled multi walled carbon nanotubes (MWCNTs). The nanoadsorbents, MWCNTs_5-15 nm and MWCNTs_16-25 nm were applied for Pb(II) and Ni(II) ion removal from paint, battery and electroplating wastewater. The results indicated successful synthesis of MWCNTs with diameter distribution ranges of 5-15 nm and 16-25 nm. The synthetized smaller diameter MWCNTs_5-15 nm revealed higher Brunauer-Emett-Teller (BET) surface area of 1306 ± 5 m²/g compared to larger diameter MWCNTs_16-25 nmwith the surface area of 1245 ± 4 m²/g. They demonstrated excellent adsorption of Pb(II) and Ni(II) ions within the permissible concentration proposed by WHO at pH, contact time, adsorbent dosage and temperature of 5, 60 min, 30 mg/L and 50 °C, respectively. Particularly, MWCNTs_5-15 nm possessed high adsorption capacity of 215.38 ± 0.03 mg/g for Pb(II) and 230.78 ± 0.01 mg/g for Ni(II). Again, the maximum adsorption capacity of 201.35 ± 0.02 and 206.40 ± 0.02 mg/g was achieved for Pb(II) and Ni(II) using MWCNTs_16-25 nm. All in all, the adsorption capacity of the nanoadsorbents at the investigated diameter range showed higher efficiency compared to other materials for heavy metals elimination from chemical industrial wastewater.

Biochar obtained from cinnamon and cannabis as effective adsorbents for removal of lead ions from water

The feedstock from cinnamon (CI) and cannabis (CA) were used for providing biochar at different temperatures using the pyrolysis method (300, 400, and 600 °C) as appropriate adsorbents for removing Pb(II) ions. The properties of materials were examined with varied techniques. The BET surface area of CI600 and CA600 was higher compared with others. The adsorption efficiency of Pb(II) ions relies on initial Pb(II) concentration, pH, adsorbent dose, equilibrium time, and temperature. The adsorption isotherms of Pb(II) ions were assessed via Langmuir adsorption isotherm and the pseudo-second-order model and electrostatic interaction became visible to play the main role in the adsorption process.