ZnMOF-74 responsive fluorescence sensing platform for detection of Fe3+

Smartphone-assisted colorimetric dual-mode sensing system based on europium-doped metal-organic frameworks for rapid on-site visual detection of Fe3+ and doxycycline

Exploring a rapid, sensitive, low-cost, in-situ intelligent monitoring multi-target fluorescence detection platform is important for food safety and environmental monitoring. A dual-mode ratiometric fluorescence sensing system integrated with a smartphone based on a luminescent metal-organic framework (NH2-MIL-53) and CdTe/Eu was developed for visual, in-situ analysis of Fe3+ and doxycycline (DOX) in this paper. Interestingly, with increasing Fe3+ concentration, the fluorescence sensing system exhibits dual-emission with CdTe QDs at 540 nM as the response signal and NH2-MIL-53 at 438 nm as the reference signal, resulting in a significant color shift of fluorescence color from blue-green to blue, with a linear range of 5--1550 nM and a detection limit of 1.08 nM. In the presence of DOX, the blue fluorescence of NH2-MIL-53 and the green fluorescence of CdTe QDs were quenched respectively by the internal filtering effect and the photoelectron transfer effect. While DOX enhances the red fluorescence of Eu3+ by the antenna effect, forming a triple-emission fluorescence sensor. The visual color of this fluorescent sensor shifted from blue green to grey to pink-white to pink to fuchsia to red as the DOX concentration increased with a detection limit of 0.11 nM. Furthermore, the developed intelligent sensing platform achieved real-time in-situ detection of Fe3+ and DOX with detection limit of 1.47 nM and 6.43 nM, respectively. The platform was applied to detection actual samples with satisfactory results, which proved a promising application for real-time on-site food safety monitoring and human health monitoring.

A single recognition unit-based virtual sensor Array: Applying 3D fluorescence spectroscopy to inner filter effect-based sensing

A convenient, fast, low-cost detection and discrimination method is demanded for environmental monitoring but still it remains more technological challenges. Herein, we demonstrate that the inner filter effect (IFE), in combination with three-dimensional fluorescence spectroscopy, can offer a virtual sensor array (VSA) as apropersolution. And with the aid of pattern recognition techniques, it is feasible to recognize compounds with structural similarities economically and effectively. In this study, with the help of visual clustering plots of principal component analysis (PCA), a prediction model based on hierarchical strategy was made using support vector machine (SVM) method for the qualitative profiling of aromatic pollutants. The VSA was constructed by a single metal-organic framework (MOF) recognition unit (MOF-74 (Zn)) with the excitation wavelength as external regulatory factors. Pattern characteristics of four aromatics with very similar structures (phenylamine, chlorobenzene, nitrobenzene, and phenol), both single analyte and binary mixtures, were acquired. The primary constituents of multi-dimensional spectral signals were subsequently extracted and fed into a vector machine to construct a prediction model through 10-fold cross-validation optimization, resulting in a classification accuracy of 100% for single analytes and 96% for mixtures. Quantitative research has shown that, except for chlorobenzene, all three other analytes can be predicted in concentration within an acceptable error range, and the mixture can be predicted proportionally. Moreover, the VSA can be used to distinguish these pollutants in tap and river water also. We propose for the first time a new tack for the construction of VSA in a general manner, namely using three-dimensional full range fluorescence scanning for IFE based sensing to get multiple times of information resulting from different weak interaction between analyte and sensor for decision-making.

Preparation and performance study of rhodamine B naphthylamide, a fluorescent probe, for the detection of Fe3

Fe3+ is essential for humans, and its deficiency or excess can be harmful to human health; thus, it is crucial to detect Fe3+. Herein, a novel 1,8-naphthylimide rhodamine-based fluorescent probe (NA-RhBEA) was prepared from rhodamine B, anhydrous ethylenediamine, and 1,8-naphthoic anhydride. This fluorescent probe complexes Fe3+ with N and O on the carboxyl groups of its spironolactam structure and part of the 1,8-naphthalenedicarboxylic anhydride structure, which results in spironolactam ring-opening and fluorescence. NA-RhBEA has high selectivity for Fe3+ in ethanol/buffer solution (4 : 1, v/v), and fluorescence is detected at an excitation wavelength λEX = 500 nm, an absorption peak appears at 585 nm, and a significant color change appears. The effect of the fluorescence intensity of Fe3+ under a series of different concentration conditions was investigated, and it was concluded that the fluorescence intensity increased with increasing Fe3+ concentration in the range of 0-500 μmol, and its detection limit was 0.84 μmol L-1. In addition, we explored the detection ability of NA-RhBEA in solutions with different pH values, mixed metal ions, and different solvents, and the results showed that the fluorescent sensor also has good anti-interference properties and some practical applicability.

Upconversion luminescence nanosensor for detection of Fe3+ and phosphate ion based on the inner-filter effect

In this work, an upconversion luminescence (UCL) nanosensor for fast detection of ferric ion (Fe3+) and phosphate ion (Pi) is developed based on the inner-filter effect (IFE) between NaYF4:Yb/Er upconversion nanoparticles (UCNPs) and Fe3+-hypocrellin B (HB) complex. Fe3+-HB complex has strong absorption band (450-650 nm), which overlaps with the green emission peak of UCNPs at 545 nm. By adding Fe3+ and Pi, the UCNPs-HB system produces the red-shift change of absorption spectrum, which leads to the "on-off-on" process of IFE. So, with the specific recognition ability of HB for Fe3+ and the competitive complexation of Pi for Fe3+, the proposed nanosensor utilizes the UCL change to achieve the detection of the targets. For the detections of Fe3+, the linear range is 10-600 μM with a limit of detection (LOD) of 2.62 μM, and for Pi, the linear range is 5-100 μM with a LOD of 1.25 μM. The results for selectivity, precision, and recovery test are also satisfactory. Furthermore, the real sample detection shows that the proposed nanaosensor has a great potential in environmental and biological systems. An upconversion luminescence (UCL) nanosensor based on the inner-filter effect (IFE) between upconversion nanoparticles (UCNPs) and Fe3+-hypocrellin B (HB) complex for the detection of Fe3+ and phosphate ion has been proposed, which is promising to be a convenient and sensitive assay for monitoring Fe3+ and phosphate ion in different environments and biological systems.

A Ratiometric Fluorescent Probe Based on RhB Functionalized Tb-MOFs for the Continuous Visual Detection of Fe3+ and AA

In this study, a red-green dual-emitting fluorescent composite (RhB@MOFs) was constructed by introducing the red-emitting organic fluorescent dye rhodamine B (RhB) into metal-organic frameworks (Tb-MOFs). The sample can be used as a ratiometric fluorescent probe, which not only avoids errors caused by instrument and environmental instability but also has multiple applications in detection. The results indicated that the RhB@MOFs exhibited a turned-off response toward Fe3+ and a turned-on response for the continuous detection of ascorbic acid (AA). This ratiometric fluorescent probe possessed high sensitivity and excellent selectivity in the continuous determination of Fe3+ and AA. It is worth mentioning that remarkable fluorescence change could be clearly observed by the naked eye under a UV lamp, which is more convenient in applications. In addition, the mechanisms of Fe3+- and AA-induced fluorescence quench and recovery are discussed in detail. This ratiometric probe displayed outstanding recognition of heavy metal ions and biomolecules, providing potential applications for water quality monitoring and biomolecule determination.

Recent Advances in Fluorescent Nanoprobes for Food Safety Detection

Fluorescent nanoprobes show similar fluorescence properties to traditional organic dyes, but the addition of nanotechnology accurately controls the size, shape, chemical composition, and surface chemistry of the nanoprobes with unique characteristics and properties, such as bright luminescence, high photostability, and strong biocompatibility. For example, modifying aptamers or antibodies on a fluorescent nanoprobe provides high selectivity and specificity for different objects to be tested. Fluorescence intensity, life, and other parameters of targets can be changed by different sensing mechanisms based on the unique structural and optical characteristics of fluorescent nanoprobes. What's more, the detection of fluorescent nanoprobes is cost-saving, simple, and offers great advantages in rapid food detection. Sensing mechanisms of fluorescent nanoprobes were introduced in this paper, focusing on the application progress in pesticide residues, veterinary drug residues, heavy metals, microbes, mycotoxins, and other substances in food safety detection in recent years. A brief outlook for future development was provided as well.

Synthesis characterization of Zn-based MOF and their application in degradation of water contaminants

Metal-organic frameworks (MOFs) are currently popular porous materials with research and application value in various fields such as medicine and engineering. Aiming at the application of MOFs in photocatalysis, this paper mainly reviews the main synthesis methods of ZnMOFs and the latest research progress of Zn MOF-based photocatalysts to degrade organic pollutants in water, such as organic dyes. This nanomaterial is being used to treat wastewater and has proven to be very efficient because of its exceptionally large surface area and porous nature. The results show that Zn-MOFs are capable of high degradation of the above pollutants and over 90% of degradation was observed in publications. In addition, the reusability percentage was examined and studies showed that the Zn-MOF nanostructure has very good stability and can continue to degrade a high percentage of pollutants after several cycles. This review focuses on Zn-MOFs and their composites. First, the methods of synthesis and characterization of these compounds are given. Finally, the application of these composites in the process of photocatalytic degradation of dye pollutants such as methylene blue, methyl orange, crystal violet, rhodamine B, etc. is explained.

A dual-channel probe based on copper ion-mediated metal organic framework composite for colorimetric and ratiometric fluorescence monitoring of glyphosate degradation in soil and water

A dual-channel probe was developed, based on a novel composite metal organic frameworks (ZnMOF-74@Al-MOF) for glyphosate determination through ratio fluorescence and colorimetric methods. The prepared probe can not only recognize and combine glyphosate by introducing copper ion into the MOF, but also possess peroxidase-like catalytic activity. The recognition of target glyphosate brought about changes relative to its concentration on fluorescence intensity and ultraviolet absorption. And, the high specific surface area and porosity of porphyrin MOF provides the developed probe with more response opportunities to afford a better detection performance for glyphosate. Under optimum conditions, the copper ion-mediated method exhibited good detection performance for glyphosate with low detection limits (0.070 and 0.092 μg mL^-1 for fluorescence and colorimetric techniques, respectively). Furthermore, the possible mechanisms of the fluorescence quenching and the peroxidase-like catalytic of the probe were also explored. This dual-channel method was applied to monitor glyphosate degradation in environmental samples and satisfactory results were obtained.

Recent Trends and Advances in Porous Metal-Organic Framework Nanostructures for the Electrochemical and Optical Sensing of Heavy Metals in Water

With the expansion and advancement in agricultural and chemical industries, various toxic heavy metals such as lead, cadmium, mercury, zinc, copper, arsenic etc. are continuously released into the environment. Intake of sources contaminated with such toxic metals leads to various health issues. Keeping the serious effects of these toxic metal ions in view, various organic-inorganic nanomaterials based sensors have been exploited for their detection via optical, electrochemical and colorimetric approaches. Since a chemical sensor works on the principle of interaction between the sensing layer and the analytes, a sensor material with large surface area is required to enable the largest possible interaction with the target molecules and hence the sensitivity of the chemical sensor. However, commonly employed materials such as metal oxides and conducting polymers tend to feature relatively low surface areas, and hence resulting in low sensitivity of the sensor. Metal-Organic Frameworks (MOFs) nanostructures are another category of organic-inorganic materials endowed with large surface area, ultra-high and tunable porosity, post-synthesis modification features, readily available active sites, catalytic activity, and chemical/thermal stability. These properties provide high sensitivity to the MOF based sensors due to the adsorption of large number of target analytes. The current review article focuses on MOFs based optical and electrochemical sensors for the detection of heavy metals.

A novel 2D metal–organic framework probe: a highly sensitive and visual fluorescent sensor for Al3+, Cr3+ and Fe3+ ions

A novel 2D MOF Tb-DBA was constructed. Tb-DBA could detect Al3+, Cr3+ and Fe3+ ions rapidly, sensitively, selectively, reversibly and visually. Tb-DBA represents a promising material for the quick detection of metal ions in aqueous solution.

Quaternary Ammonium-Mediated Delamination of Europium-Based Metal-Organic Framework into Ultrathin Nanosheets for the Selective Photoelectrochemical Sensing of Fe3

Structural delamination of bulk layered metal-organic frameworks (MOFs) remains a great challenge, largely owing to a lack of general synthetic strategies. Here, we reported a simple solvent-free intercalation strategy for the delamination of rare-earth-based MOF (RE-MOF) with a topology structure of MIL-78 by tuning the chain length of quaternary ammonium salts. Four types of quaternary ammonium salts, involving tetraethylammonium bromide (TEAB), tetrapropylammonium bromide (TPAB), tetrabutylammonium bromide (TBAB), and hexadecyl trimethyl ammonium bromide (CTAB) were introduced to investigate their intercalation capabilities. It is evident in our case that the interruption/intercalation behavior of quaternary ammonium salts differs with their steric structures, and the chain-like CTAB can induce obvious delamination of MIL-78 crystals. Particularly, the CTAB-intercalated ultrathin Eu-based MIL-78 nanosheets exhibited unique selective photoelectrochemical sensing property toward trace amounts of Fe³⁺ ions in aqueous solution with a detection limit of 0.0899 μM at a signal-to-noise ratio of 3. These results demonstrated a green bottom-up strategy to obtain high-quality RE-MOF nanosheets for potential photocurrent response applications.

Manganese-doped iron coordination polymer nanoparticles with enhanced peroxidase-like activity for colorimetric detection of antioxidants

A convenient and sensitive antioxidant assay with high performance is essential for assessing food quality and monitoring the oxidative stress level of biological matrices. Although coordination polymer nanoparticles (CPNs)-based nanozymes have emerged as candidates in the analytical field, strategies to improve the catalytic activity of CPNs have been scarcely revealed and studied. Herein, we demonstrate a manganese (Mn) doping strategy to enhance the peroxidase-mimetic activity of Fe-based CPNs. By tuning the Mn doping amounts and selecting 2,5-dihydroxyterephthalic acid (H₄DHTP) as ligands, the produced nanozymes in amorphous state followed the catalytic activity order of Fe₅Mn-DHTP > Fe₈Mn-DHTP > Fe₂Mn-DHTP > Fe-DHTP > Mn-DHTP. Ulteriorly, benefitting from the best catalytic performance and definite catalytic mechanism of Fe₅Mn-DHTP, versatile colorimetric assays for ultrasensitive detection of one exogenous antioxidant (ascorbic acid, AA) and two endogenous antioxidants (glutathione, GSH; cysteine, Cys) have been deftly devised based on the inhibition of the 3,3',5,5'-tetramethylbenzidine chromogenic reaction in presence of H₂O₂. It was found that mercaptan (GSH and Cys) and AA exhibited different inhibition mechanisms. Practically, such a colorimetric assay was viable to determine the total antioxidant capacity of drugs and foods with desirable results. This work proposes a feasible strategy for embellishing CPN nanozymes used for designing sensitive and convenient assays for various antioxidants based on an explicit detection mechanism.

A Cd-MOF fluorescence sensor with dual functional sites for efficient detection of metal ions in multifarious water environments

A 2D MOF displays high performance luminescence quenching for detecting Fe3+ and Cu2+ in pure water, actual river water and simulated HEPES with superior low LODs. Multiple experiments and DFT calculations co-verify a weak interaction quenching mechanism.

Fluorescent detection of S2- based on ZnMOF-74 and CuMOF-74

The detection of S^2- is of great significance because excess S^2- can lead to a variety of serious physiological diseases. Here, two metal-organic frameworks (MOFs), ZnMOF-74 and CuMOF-74, were synthesized by using 2,5-dihydroxy terephthalic acid with strong fluorescence as organic ligand and Zn²⁺ or Cu²⁺ as central coordination ions for S^2- detection. Both as-prepared ZnMOF-74 and CuMOF-74 displayed nanospheres with a diameter of about 100 nm. Under the excitation of 353 nm, the ZnMOF-74 had a characteristic emission peak at 537 nm and the CuMOF-74 had a characteristic emission peak at 528 nm under excitation of 356 nm. The interaction of S^2- and Zn²⁺ weakened the fluorescence of ZnMOF-74 but the interaction of S^2- with Cu²⁺ to form CuS restored the fluorescence of CuMOF-74, so the ZnMOF-74 and CuMOF-74 were exploited as a fluorescent nanosensor for sensing S^2-. The ZnMOF-74 sensor has a good linear range of 19.6 nmol L^-1-90.0 μmol L^-1, and the limit of detection was as low as 6.53 nmol L^-1. The CuMOF-74 sensor has a good linear relationship with II₀ in the S^2- concentration range of 1.50 nmol L^-1-125 μmol L^-1, and the limit of detection was 1.50 nmol L^-1. The proposed ZnMOF-74 and CuMOF-74 sensor could also detect S^2- in actual samples.