Magnetic graphene oxide as a convenient nanosorbent to streamline matrix solid-phase dispersion towards the extraction of pesticides from vegetables and their determination by GC–MS

Rapid detection of thiabendazole residues in apple juice by surface-enhanced Raman scattering coupled with silver coated gold nanoparticles

In recent years, the excessive use of pesticides has posed significant hazards to the ecological environment and human health in the pursuit of high crop yields. In this work, we developed a simple, sensitive, and eco-friendly approach for rapid detection of thiabendazole in apple juice using surface-enhanced Raman scattering (SERS) coupled with silver-coated gold nanoparticles (Au@Ag NPs). The developed Au@Ag NPs exhibited excellent sensitivity, allowing for the detection of thiabendazole in standard solutions at a minimum concentration of 50 ng/mL. Furthermore, two sample preparation methods were compared for detecting thiabendazole in apple juice. As the direct detection method for SERS analysis failed to detect thiabendazole at levels below the maximum residue limit based on the Chinese standard (3000 ng/mL), the effects of main matrix components in apple juice on the detection of thiabendazole were further investigated. The results revealed that both sugars and organic acids in apple juice interfered with the SERS measurement to varying degrees. Consequently, we optimized the QuEChERS method for sample preparation and achieved a higher sensitivity with a minimum detectable concentration of 250 ng/mL, a limit of detection of 0.06 mg/L and the recoveries of spiked samples were ranged from 80.2 % to 108.6 %. This study demonstrated the feasibility of proposed SERS method for pesticide residue analysis, addressing the need for food safety monitoring.

Electrochemiluminescence Sensor Based on CTS-MoS2 and AB@CTS with Functionalized Luminol for Detection of Malathion Pesticide Residues

The accumulation of pesticide residues poses a significant threat to the health of people and the surrounding ecological systems. However, traditional methods are not only costly but require expertise in analysis. An electrochemiluminescence (ECL) aptasensor was developed using chitosan and molybdenum disulfide (CTS-MoS2), along with acetylene black (AB@CTS) for the rapid detection of malathion residues. Due to the weak interaction force, simple composite may lead to uneven dispersion; MoS2 and AB were dissolved in CTS solution, respectively, and utilized the biocompatibility of CTS to interact with each other on the electrode. The MoS2 nanosheets provided a large specific surface area, enhancing the utilization rate of catalytic materials, while AB exhibited excellent conductivity. Additionally, the dendritic polylysine (PLL) contained numerous amino groups to load abundant luminol to catalyze hydrogen peroxide (H2O2) and generate reactive oxygen species (ROS). The proposed ECL aptasensor obtained a low detection limit of 2.75 × 10-3 ng/mL (S/N = 3) with a good detection range from 1.0 × 10-2 ng/mL to 1.0 × 103 ng/mL, demonstrating excellent specificity, repeatability, and stability. Moreover, the ECL aptasensor was successfully applied for detecting malathion pesticide residues in authentic samples with recovery rates ranging from 94.21% to 99.63% (RSD < 2.52%). This work offers valuable insights for advancing ECL sensor technology in future applications.

Competitive Assay for the Ultrasensitive Detection of Organophosphate Pesticides Based on a Fiber-Optic Particle Plasmon Resonance Biosensor and an Acetylcholinesterase Binding Peptide

An acetylcholinesterase (AChE) binding-based biosensor was developed for the ultrasensitive detection of organophosphate (OP) pesticides. The biosensor integrates the technique based on fiber-optic particle plasmon resonance detection and a synthetic AChE binding peptide conjugated with gold nanoparticles on the optical fiber surface via an AChE competitive binding assay. The OP pesticides present in the solution hinder the binding of AChE to the peptide on the biosensor by competing for the binding sites present in AChE. The limit of detection obtained for parathion using this method was observed to be 0.66 ppt (2.3 pM). This method shows a wide linear dynamic range of 6 orders. Furthermore, the use of the AChE binding peptide in the biosensor can better discriminate OPs against carbamates by using only a single biosensor. The practical application of this method was tested using spiked samples, which yielded good recovery and reproducibility. The spiked sample required minimal pretreatment before analysis; hence, this biosensor may also be used in the field.

Magnetic Solid-Phase Extraction Based on Silica and Graphene Materials for Sensitive Analysis of Emerging Contaminants in Wastewater with the Aid of UHPLC-Orbitrap-MS

With the advancement of technology and nanotechnology, new extraction sorbents have been created and effectively used for the magnetic solid-phase extraction of target analytes. Some of the investigated sorbents have better chemical and physical properties, exhibiting high extraction efficiency and strong repeatability, combined with low detection and quantification limits. In this study graphene oxide (GO) magnetic composites were prepared and used as magnetic solid-phase extraction (MSPE) adsorbents along with synthesized silica based magnetic nanoparticles (MNPs) functionalized with the C18 group for the preconcentration of emerging contaminants (ECs) in wastewater samples generated from hospital and urban facilities. The sample preparation with magnetic materials was followed by UHPLC-Orbitrap MS analysis for the accurate identification and determination of trace amounts of pharmaceutical active compounds and artificial sweeteners in effluent wastewater. Optimal conditions were used for the extraction of ECs from the aqueous samples, prior to UHPLC-Orbitrap MS determination. The proposed methods achieved low quantitation limits between 1.1-33.6 ng L^-1 and 1.8-98.7 ng L^-1 and satisfactory recoveries in the range of 58.4%-102.6%. An intra-day precision of less than 23.1% was achieved, while inter-day RSD% values in the range of 5.6-24.8% were observed. These figures of merit suggest that our proposed methodology is suitable for the determination of target ECs in aquatic systems.

Application of Humic and Fulvic Acids as an Alternative Method of Cleaning Water from Plant Protection Product Residues

Humic acids (HAs) and fulvic acids (FAs) are naturally occurring compounds that influence the fate and transportation of various compounds in the soil. Although HAs and FAs have multiple uses, the reports about their sorbent potential for environmental pollutants are scanty and sparse. In this study, HA and FA, isolated from lignite samples from two mines in Greece, were studied as sorbent materials for three active compounds of plant protection products, namely glyphosate (herbicide), cypermethrin (pyrethroid insecticide), and azoxystrobin (fungicide). According to the results, both HA and FA are promising sorbent materials for these active compounds, with HA achieving better sorption for cypermethrin and azoxystrobin, while FA was found to be more efficient for glyphosate. Moreover, their performance was not compromised by other components commonly found in commercially available herbicides/insecticides/fungicides. In addition, no significant leaching of the sorbed compounds was recorded. Finally, the two materials achieved similar sorption efficiency of the compounds from lake water.

Carbon nanomaterials for the detection of pesticide residues in food: A review

In agricultural fields, pesticides are widely used, but their residual presence in the environment poses a threat to humans, animals, insects, and ecosystems. The overuse of pesticides for pest control, enhancement of crop yield, etc. leaves behind a significant residual amount in the environment. Various robust, reliable, and reusable methods using a wide class of composites have been developed for the monitoring and controlling of pesticides. Researchers have discovered that carbon nanomaterials have a wide range of characteristics such as high porosity, conductivity and easy electron transfer that can be successfully used to detect pesticide residues from food. This review emphasizes the role of carbon nanomaterials in the field of pesticide residue analysis in different food matrices. The carbon nanomaterials including carbon nanotubes, carbon dots, carbon nanofibers, graphene/graphene oxides, and activated carbon fibres are discussed in the review. In addition, the review examines future prospects in this research area to help improve detection techniques for pesticides analysis.

Behavior of two classes of organic contaminants in the presence of graphene oxide: Ecotoxicity, physicochemical characterization and theoretical calculations

Graphene oxide (GO) production has increased considerably and therefore its presence in the environment is inevitable. When in aquatic environment GO can interact with co-existing compounds, modifying their toxicities for several organisms. However, the toxic effects of co-exposure of GO and organic compounds are rarely reported in the literature. Herein, we studied the behavior of four organic aquatic contaminants found in surface water such as 2-phenylbenzotriazoles (non-Cl PBTA-9 and PBTA-9) and phenoxyphenyl pesticides, pyriproxyfen (PYR) and lambdacyhalothrin (LCT), in the presence of GO. GO reduced 90% and 83% of the toxicity of non-Cl PBTA-9 and PBTA for Daphnia. When PBTAs were adsorbed onto GO surface their interactions caused GO agglomeration (up to 20 mm) and consequent precipitation, making PBTAs less bioavailable. PYR and LCT's toxicities increased up to 83% for PYR and 47% for LCT in the presence of GO, because their adsorption on GO lead to the stabilization of the suspensions (up to 0.5 μm). Those particles were then easily ingested and retained in the digestive tract of the daphnids, triggering the Trojan horse effect. Based on theoretical calculations we observed that PBTA compounds are planar, electron-poorer and more reactive than the studied pesticides, suggesting a better stability of the GO/PBTA complexes. PYR and LCT are nonplanar, electron-richer and less reactive towards GO than PBTAs, forming less stable GO complexes that could facilitate the desorption of pesticides, increasing toxic effects. Our results suggest that the properties of the organic toxicants can influence the stability of graphene oxide suspensions, playing a fundamental role in the modulation of their toxicity. Further research is needed for a deep understanding of the behavior of nanomaterials in the presence of contaminants and their effect in the toxicity of aquatic organisms.

One-step integrated sample pretreatment technique by gas-liquid microextraction (GLME) to determine multi-class pesticide residues in plant-derived foods

Gas-liquid microextraction technique (GLME) has been integrated with dispersive solid phase extraction to establish a one-step sample pretreatment approach for rapid analysis of multi-class pesticides in different plant-derived foods. A 50 μL of organic solvent plus 40 mg of PSA were required throughout the 5-minute pretreatment procedure. Good trueness (recoveries of 67.2 - 105.4%) and precision (RSD ≤ 18.9%) were demonstrated by the one-step GLME method, with MLOQs ranged from 0.001 to 0.011 mg kg^-1. As high as 93.6% pesticides experienced low matrix effect through this method, and the overall matrix effects (ME%) were generally better or comparable to QuEChERS. This method successfully quantified 2-phenylphenol, quintozene, bifenthrin and permethrin in the range of 0.001 - 0.008 mg kg^-1 in real food samples. The multiresidue analysis feature of GLME has been validated, which displays further potential for on-site determination of organic pollutants in order to safeguard food safety and human health.

Greenness of magnetic nanomaterials in miniaturized extraction techniques: A review

Green analytical chemistry principles should be followed, as much as possible, and particularly during the development of analytical sample preparation methods. In the past few years, outstanding materials such as ionic liquids, metal-organic frameworks, carbonaceous materials, molecularly imprinted materials, and many others, have been introduced in a wide variety of miniaturized techniques in order to reduce the amount of solvents and sorbents required during the analytical sample preparation step while pursuing more efficient extraction methods. Among them, magnetic nanomaterials (MNMs) have gained special attention due to their versatile properties. Mainly, their ability to be separated from the sample matrix using an external magnetic field (thus enormously simplifying the entire process) and their easy combination with other materials, which implies the inclusion of a countless number of different functionalities, highly specific in some cases. Therefore, MNMs can be used as sorbents or as magnetic support for other materials which do not have magnetic properties, the latter permiting their combination with novel materials. The greenness of these magnetic sorbents in miniaturized extractions techniques is generally demonstrated in terms of their ease of separation and amount of sorbent required, while the nature of the material itself is left unnoticed. However, the synthesis of MNMs is not always as green as their applications, and the resulting MNMs are not always as safe as desired. Is the analytical sample preparation field ready for using green magnetic nanomaterials? This review offers an overview, from a green analytical chemistry perspective, of the current state of the use of MNMs as sorbents in microextraction strategies, their preparation, and the analytical performance offered, together with a critical discussion on where efforts should go.

The Current Role of Graphene-Based Nanomaterials in the Sample Preparation Arena

Since its discovery in 2004 by Novoselov et al., graphene has attracted increasing attention in the scientific community due to its excellent physical and chemical properties, such as thermal/mechanical resistance, electronic stability, high Young's modulus, and fast mobility of charged atoms. In addition, other remarkable characteristics support its use in analytical chemistry, especially as sorbent. For these reasons, graphene-based materials (GBMs) have been used as a promising material in sample preparation. Graphene and graphene oxide, owing to their excellent physical and chemical properties as a large surface area, good mechanical strength, thermal stability, and delocalized π-electrons, are ideal sorbents, especially for molecules containing aromatic rings. They have been used in several sample preparation techniques such as solid-phase extraction (SPE), stir bar sorptive extraction (SBSE), magnetic solid-phase extraction (MSPE), as well as in miniaturized modes as solid-phase microextraction (SPME) in their different configurations. However, the reduced size and weight of graphene sheets can limit their use since they commonly aggregate to each other, causing clogging in high-pressure extractive devices. One way to overcome it and other drawbacks consists of covalently attaching the graphene sheets to support materials (e.g., silica, polymers, and magnetically modified supports). Also, graphene-based materials can be further chemically modified to favor some interactions with specific analytes, resulting in more efficient hybrid sorbents with higher selectivity for specific chemical classes. As a result of this wide variety of graphene-based sorbents, several studies have shown the current potential of applying GBMs in different fields such as food, biological, pharmaceutical, and environmental applications. Within such a context, this review will focus on the last five years of achievements in graphene-based materials for sample preparation techniques highlighting their synthesis, chemical structure, and potential application for the extraction of target analytes in different complex matrices.

Dispersive micro-solid phase extraction based on a graphene/polydopamine composite for the detection of pyrethroids in water samples

In this study, a simple, rapid, precise, and environmentally friendly microextraction named dispersive micro-solid phase extraction based on a graphene/polydopamine composite as a sorbent was investigated for the analysis of four pyrethroids (fenpropathrin, cyhalothrin, etofenprox and bifenthrin) in water samples. The graphene/polydopamine composite was successfully synthesized using a one-step method, and was characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy and X-ray photoelectron spectroscopy. The simplicity and rapidity of dispersive micro-solid phase extraction and the high surface area and adsorptivity of the graphene/polydopamine composite were combined in the proposed method. Several main parameters, including the amount of the sorbent, extraction time, ionic strength and desorption conditions, were independently optimized and the results were compared to find the best extraction setup for dispersive micro-solid phase extraction. Under the optimal conditions, good linearity was observed for all the target analytes, with the coefficient of determination ranging from 0.9997 to 0.9999. The extraction recoveries obtained using the proposed method ranged from 76.81% to 85.29%, and the limits of detection varied from 1.5 to 3 μg L-1. In addition, the relative standard deviation values for the intra-day precision were between 0.41% and 3.00%, while the inter-day precision showed relative standard deviation values ranging from 1.61% to 5.59%. Overall, the figures of merit of the entire procedure showed that this technique could produce satisfactory results in the detection of pyrethroids in water samples or other organic pollutants in the future.