Magnetic separation and enzymatic catalysis conjugated colorimetric immunosensor for Hepatitis B surface antigen detection

A portable colorimetric immunosensor for highly sensitive point-of-care testing of leather artifacts

A point-of-care testing (POCT) platform, i.e., a portable colorimetric immunosensor based on iron oxide magnetic beads and AuNPs, has been developed for detecting leather residues. The immunosensor demonstrates a linear detection range from 1 ng/mL to 10 µg/mL, with a limit of detection (LOD) of 0.985 ng/mL. The sensor exhibits high specificity and repeatability and performs effectively in detecting leather artifacts excavated from Inner Mongolia. Thus, the proposed colorimetric immunosensor not only enables the micro-detection of leather artifacts but also shows significant potential for on-site leather detection at archaeological sites.

Nano-immuno-conjugates inspired by hydrophilic perovskite fluorescent spheres and magnetic assisted for detection of hepatitis B surface antigen

The rampant hepatitis B virus (HBV) seriously endangers human health, and hepatitis B surface antigen (HBsAg) is its early diagnostic marker. Therefore, it is crucial to construct a fast and highly sensitive HBsAg detection method. Based on high-efficiency magnetic separation technology and fluorescent composite material labelling technology, an accurate, fast and sensitive fluorescent immunosensing system for HBsAg detection was developed. Immunomagnetic beads constructed from carboxyl-functionalized Fe3O4 nanoparticles (Fe3O4-COOH) with excellent magnetic response performance were used as efficient capture carriers for HBsAg. Immunofluorescence composite microspheres constructed based on ultra-stable polystyrene-coated CsPbBr3 perovskite nanocrystals (CPB@PSAA) with high hydrophilic properties, were excellent fluorescent markers for HBsAg. Using this sensitive sandwich fluorescence sensing system a good linear relationship within the range of 0.2-15 ng/mL was established between HBsAg concentration and fluorescence intensity with a limit of detection (LOD) of  0.05 ng/mL. The system obtained satisfactory results when tested on real human serum samples. The magnetic-assisted fluorescence immune-sandwich sensor system has broad application prospects in biomedicine such as rapid and early diagnosis and effective prevention of infectious diseases.

Covalent Coupling Assisted Hydrophilic Perovskite Spheres for Ratiometric Fluorescent Visual Multichannel Immunoassay

Quantitative fluorescence immunoassay is essential for the construction of biosensing mechanisms and the quantification of trace markers. But the interference problems caused by low fluorescence efficiency and broad fluorescence spectrum of fluorescent probes have hindered the continued development of ratiometric fluorescence sensing in biosensing. Perovskite materials, with ultra-high color purity (FWHM < 30 nm) and photoluminescence quantum yield (PLQY) (close to 100%), are expected to be next-generation fluorescent probes. However, poor water stability and biocompatibility are still non-negligible in biosensor applications. In this work, hyperstatic perovskite fluorescent microspheres prepared by swelling-shrinking method can be used as ratiometric fluorescence signals and biological immunoassay platforms. Meanwhile, inspired by p-aminophenol (AP) controlled synthesis and the catalytic reaction of 4-aminophenol phosphate (APP) triggered by alkaline phosphatase (ALP), a strategy to prepare fluorescent nanoparticles as fluorescence signals for ALP detection is proposed. Most importantly, it is proposed for the first time to combine this enzymatic fluorescence with perovskite materials using covalent linkage to create a novel cascade immunoassay and use it for quantitative and visualization determination of hepatitis B surface antigen (HBsAg) for application verification. These results indicate the biosensing potential of perovskite materials and provide a pathway for high sensitivity enzyme detection and enzyme triggered immune detection.

Dual signal amplified electrochemical aptasensor based on PEI-functionalized GO and ROP for highly sensitive detection of cTnI

Cardiac troponin I (cTnI) is considered as the gold standard for the diagnosis of acute myocardial infarction (AMI) because of its excellent specificity and sensitivity. Herein, a novel aptasensor based on the dual signal amplification strategy of Polyethyleneimine functionalized Graphene oxide (GO) and ring-opening polymerization (ROP) for the first time was successfully constructed to achieve high sensitivity detection of cTnI. Briefly, cTnI-aptamer 1 (Apt1) was immobilized on the surface of gold electrode by self-assembly of Au-S bonds to specifically capture cTnI. After specific recognition of cTnI, Apt2 coated PEI-functionalized GO composites acted as macroinitiators for the subsequent ROP reaction. Next, α-amino acid-N-carboxylic acid anhydride ferrocene derivatives (NCA-Fc), the monomer for ROP reaction, was added to the electrode surface. The combined application of PEI-functionalized GO and NCA-Fc better achieves the high sensitivity and signal amplification of the aptasensor. Under optimal conditions, the aptasensor exhibited a wide linear range of 10 fg mL^-1 to 10 ng mL^-1 and the limit of detection was 3.78 fg mL^-1. Moreover, this method displayed the advantages of good selectivity, simple operation and excellent stability. Meanwhile, the aptasensor had good accuracy and applicability even in real serum samples analysis, demonstrating its considerable application potential in biomedical assays.

Fe3O4-doped silk fibroin-polyacrylamide hydrogel for selective and highly efficient absorption of cationic dyes pollution in water

Overuse of organic dyes has caused serious threats to the ecosystem and human health. However, the development of high-efficient, environmentally friendly, selective, and degradable cationic dye adsorbents remains a huge challenge. In this work, a novel Fe₃O₄nanoparticles doped silk fibroin-polyacrylamide magnetic hybrid hydrogel (Fe₃O₄@SF-PAAM) was successfully fabricated by combining free radical polymerization to prepare hydrogels andin situco-precipitation to prepare nanoparticles. The obtained Fe₃O₄@SF-PAAM hydrogel shows strong magnetic performance with saturated magnetic of 10.2 emu mg^-1and excellent swelling properties with a swelling ratio of 55867%. In addition, Fe₃O₄@SF-PAAM can adsorb cationic dyes such as methylene blue (MB), crystal violet, and Rhodamine B, but has no adsorption effect on anionic dyes such as methyl orange, congo red, and carmine, indicating that Fe₃O₄@SF-PAAM has good selective adsorption properties for cationic dyes. Interestingly, the adsorption capacity of Fe₃O₄@SF-PAAM was approached 2025 mg g^-1for MB (MB, a typical cation dye) at 25 °C and neutral. Meanwhile, the hybrid hydrogel is reusable, the removal rate for MB is still over 90% after the five adsorption-desorption cycles. The fabricated magnetic hybrid hydrogel is a kind of a highly-efficiency and eco-friendly adsorbent and presents great potential applications in water purification and environmental protection.

Freestanding Fe3O4/Ti3C2TxMXene/polyurethane composite film with efficient electromagnetic shielding and ultra-stretchable performance

Electromagnetic pollution seriously affects the human reproductive system, cardiovascular system, people's visual system, and so on. A novel versatile stretchable and biocompatible electromagnetic interference (EMI) shielding film has been developed, which could effectively attenuate electromagnetic radiation. The EMI shielding film was fabricated with a convenient solution casting and steam annealing with 2D MXene, iron oxide nanoparticles, and soluble polyurethane. The EMI shielding effectiveness is about 30.63 dB at 8.2 GHz, based on its discretized interfacial scattering and high energy conversion efficiency. Meanwhile, the excellent tensile elongation is 30.5%, because of the sliding migration and gradient structure of the nanomaterials doped in a polymer matrix. In addition, the film also demonstrated wonderful biocompatibility and did not cause erythema and discomfort even after being attached to the arm skin over 12 h, which shows the great potential for attenuation of electromagnetic irradiation and protection of human health.

Optical Biosensors for Diagnostics of Infectious Viral Disease: A Recent Update

The design and development of biosensors, analytical devices used to detect various analytes in different matrices, has emerged. Biosensors indicate a biorecognition element with a physicochemical analyzer or detector, i.e., a transducer. In the present scenario, various types of biosensors have been deployed in healthcare and clinical research, for instance, biosensors for blood glucose monitoring. Pathogenic microbes are contributing mediators of numerous infectious diseases that are becoming extremely serious worldwide. The recent outbreak of COVID-19 is one of the most recent examples of such communal and deadly diseases. In efforts to work towards the efficacious treatment of pathogenic viral contagions, a fast and precise detection method is of the utmost importance in biomedical and healthcare sectors for early diagnostics and timely countermeasures. Among various available sensor systems, optical biosensors offer easy-to-use, fast, portable, handy, multiplexed, direct, real-time, and inexpensive diagnosis with the added advantages of specificity and sensitivity. Many progressive concepts and extremely multidisciplinary approaches, including microelectronics, microelectromechanical systems (MEMSs), nanotechnologies, molecular biology, and biotechnology with chemistry, are used to operate optical biosensors. A portable and handheld optical biosensing device would provide fast and reliable results for the identification and quantitation of pathogenic virus particles in each sample. In the modern day, the integration of intelligent nanomaterials in the developed devices provides much more sensitive and highly advanced sensors that may produce the results in no time and eventually help clinicians and doctors enormously. This review accentuates the existing challenges engaged in converting laboratory research to real-world device applications and optical diagnostics methods for virus infections. The review's background and progress are expected to be insightful to the researchers in the sensor field and facilitate the design and fabrication of optical sensors for life-threatening viruses with broader applicability to any desired pathogens.