Effect of novel cytosine-l-alanine derivative based corrosion inhibitor on steel surface in acidic solution

Corrosion Inhibition Using Harmal Leaf Extract as an Eco-Friendly Corrosion Inhibitor

Extract of natural plants is one of the most important metallic corrosion inhibitors. They are readily available, nontoxic, environmentally friendly, biodegradable, highly efficient, and renewable. The present project focuses on the corrosion inhibition effects of Peganum Harmala leaf extract. The equivalent circuit with two time constants with film and charge transfer components gave the best fitting of impedance data. Extraction of active species by sonication proved to be an effective new method to extract the inhibitors. High percent inhibition efficacy IE% of 98% for 283.4 ppm solutions was attained using impedance spectroscopy EIS measurements. The values of charge transfer Rct increases while the double layer capacitance Cdl values decrease with increasing Harmal extract concentration. This indicates the formation of protective film. The polarization curves show that the Harmal extract acts as a cathodic-type inhibitor. It is found that the adsorption of Harmal molecules onto the steel surface followed Langmuir isotherm. Fourier-transform infrared spectroscopy FTIR was used to determine the electron-rich functional groups in Harmal extract, which contribute to corrosion inhibition effect. Scanning electron microscopy SEM measurement of a steel surface clearly proves the anticorrosion effect of Harmal leaves.

Effect of phosphonate functional group on corrosion inhibition of imidazoline derivatives in acidic environment

In the present study, ({2-[2-(7-Isopropyl-1,4-dimethyl-9,10-octahydro-phenanthren-1-yl)-4,5-dihydro-1-yl]-ethylamino}-methyl)-phosphonicimidazole (GSIM) was synthesized by introducing phosphonate (-PH₂O₃) group into imidazoline derivatives and its corrosion inhibition performance was studied for Q345 steel in acidic medium along with SIM using potentiodynamic polarization, EIS and SECM analysis. Surface analysis of steel samples was also performed by optical microscopy and SEM-EDS analysis after polarization tests. XPS was used to detect chemical composition of the surface passive films. It was observed that introducing -PH₂O₃ group not only improved the adsorption capacity on the metal surface by coordinating with iron ions, but also inhibited the interference of hydrogen bond formed by -NH₂ group and water molecules on the adsorption. GSIM not only inhibited intercrystalline corrosion and pitting corrosion, but also reduced uniform corrosion. Thermodynamics studies demonstrated that GSIM followed the Langmuir adsorption isotherm and had a larger adsorption equilibrium constant than SIM, which indicated that it had a stronger adsorption capacity. XPS and UV confirmed that the coordination between GSIM and Fe³⁺ and hydrogen bonding between SIM and water molecules. The quantum chemical study further clarified that the site and strength of hydrogen bond between SIM and H₂O and the dominant configuration and coordination stability of GSIM with Fe³⁺.

Review on Corrosion Inhibitors for Oil and Gas Corrosion Issues

The pipeline system in the oil and gas industry is the heart for transportation of crude and refined petroleum. Nevertheless, continuous exposure of the pipeline surfaces to impurities and sources of corrosion such as sulfur and chromate is totally unavoidable. Vast employment of commercial corrosion inhibitors to minimize the corrosion is being restrained due to toxicity towards the environment. The emergence of “green” chemistry has led to the use of plant extracts and fruit wastes which have proven to be good corrosion inhibitors. This paper aims to provide insight into carrying out further investigation under this research theme for accurate inhibition efficiency measurement.

Preparation and Application of Modified Imidazole with MPEG (Polyethylene Glycol Monomethyl Ether) as Carbon Steel Inhibitor

The inhibition effect of three inhibitors with different chain lengths of their ether groups on Q235 steel in 0.5 M HCl solution at 318 K was determined by means of weight loss measureme nt, electrochemical methods (Tafel and EIS) and surface analysis (SEM). Moreover, the further study of corrosion inhibition mechanism was also conducted by computational methods (Quantum chemical calculations and Molecular dynamics simulations). Results reveal that the three inhibitors exhibit an excellent inhibition performance for carbon steel, and the corrosion inhibition efficiency of the three inhibitors increases with the increase of the chain length, which favors the formation of a protection film adsorbed on the surface. Analysis of polarization data informs that the adsorption type of three inhibitors basically obeys the Langmuir monolaye r adsorption, which is mainly of chemisorptive nature. Computational methods also tell that the three inhibitors possess a high reactivity and strong interaction with the iron surface, furthermore, the interaction is increased with the increase of the chain length of three inhibitors. The conclusion is in good agreement with the experimental results.

Adsorption and corrosion inhibition behaviour of new theophylline-triazole-based derivatives for steel in acidic medium

The design and synthesis of a series of theophylline derivatives containing 1,2,3-triazole moieties are presented. The corrosion inhibition activities of these new triazole-theophylline compounds were evaluated by studying the corrosion of API 5 L X52 steel in 1 M HCl medium. The results showed that an increase in the concentration of the theophylline-triazole derivatives also increases the charge transference resistance (R ct) value, enhancing inhibition efficiency and decreasing the corrosion process. The electrochemical impedance spectroscopy under static conditions studies revealed that the best inhibition efficiencies (approx. 90%) at 50 ppm are presented by the all-substituted compounds. According to the Langmuir isotherm, the compounds 4 and 5 analysed exhibit physisorption-chemisorption process, with exception of the hydrogen 3, bromo 6 and iodo 7 substituted compounds, which exhibit chemisorption process. The corrosion when submerging a steel bar in 1 M HCl was studied using SEM-EDS. This experiment showed that the corrosion process decreases considerably in the presence of 50 ppm of the organic inhibitors. Finally, the theoretical study showed a correlation between EHOMO, hardness (η), electrophilicity (W), atomic charge and the inhibition efficiency in which the iodo 7 substituted compound presents the best inhibitor behaviour.