Green synthesis of ZnO nanoparticles from Syzygium Cumini leaves extract with robust photocatalysis applications

Antibacterial efficacy ofRumex dentatusleaf extract-enriched zinc oxide and iron doped zinc nanoparticles: a comparative study

In the current investigation, zinc oxide (ZnO) nanoparticles and Fe-doped ZnO nanoparticles were sustainably synthesized utilizing an extract derived from theRumex dentatusplant through a green synthesis approach. The Scanning electron microscope (SEM), X-ray diffraction (XRD), Energy-dispersive x-ray spectroscopy (EDX), Ultra-violet visible spectroscopy (UV-vis) spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and Thermogravimetric analysis (TGA) techniques were used to examine the compositional, morphological, optical, and thermal properties of both samples. The doping of iron into ZnO NPs has significantly influenced their properties. The analysis firmly established that both ZnO NPs and Fe-doped ZnO NPs have hexagonal wurtzite structures and spherical shapes by XRD and SEM. The EDX analysis suggests that iron atoms have been successfully integrated into the ZnO lattice. The change in color observed during the reaction indicated the formation of nanoparticles. The UV-vis peaks at 364 nm and 314 nm confirmed the presence of ZnO NPs and Fe-doped ZnO NPs, respectively. The band gap of ZnO NPs by Fe dopant displayed a narrowing effect. This indicates that adding iron ions to ZnO NPs offers a control band gap. The thermal study TGA revealed that Fe-doped ZnO NPs remain stable when heated up to 600 °C. The antibacterial efficacy of ZnO NPs and Fe-doped ZnO NPs was evaluated against several bacterial strains. The evaluation is based on the zone of inhibition (ZOI). Both samples exhibited excellent antibacterial properties as compared to conventional pharmaceutical agents. These results suggest that synthesizing nanoparticles through plant-based methods is a promising approach to creating versatile and environmentally friendly biomedical products.

Green synthesis of CuO/Fe2O3/ZnO ternary composite photocatalyst using grape extract for enhanced photodegradation of environmental organic pollutant

This research delves into fabricating a CuO/Fe2O3/ZnO (CFZ) ternary composite photocatalyst, employing grape extract for its eco-conscious synthesis. The method intricately integrates copper acetate, ferric nitrate, and zinc acetate as precursor compounds, harmonizing them with grape extract serving as a green reducing agent. Meticulous microwave treatment and controlled calcination orchestrate the nuanced formation of the desired composite material. The extensive characterization, involving X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDXS), scanning electron microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analysis, ultraviolet-visible diffuse reflectance spectroscopy (UV-DRS), and photoluminescence (PL) spectroscopy, unveils an array of favorable physical, chemical, and optical attributes conducive to proficient photocatalysis. Notably, CFZ-10mc showcases a narrower bandgap of 1.91 eV, which is pivotal for bolstering electron-hole separation, thereby enhancing its photocatalytic efficacy. Assessment of CFZ's performance in degrading Rhodamine B (RhB) under UV irradiation highlights an impressive 88.8% degradation efficiency within 120 min, accompanied by a kinetic rate constant of 1.81 × 10-2 min-1. Deliberation upon crucial parameters, including photocatalyst dosage, initial RhB pH, and reactor energy consumption, introduces the electrical energy per order (EEO) as a notable efficiency metric. CFZ manifests a substantial reduction in operational costs, estimated to be 18.10 times lower than conventional photolysis, signifying an EEO value of 509.17 kWh m-3 order-1. Optimal operational conditions propose a photocatalyst content of 1.5 g L-1 and an initial RhB pH of 7, fostering the prevalence of the primary active species, •OH. These findings illuminate CFZ's potential in mitigating organic pollutants, underlining its pivotal role in sustainable water remediation. Additionally, practical implementation guidelines for leveraging CFZ's capabilities in real-world applications are presented with care and consideration.

Exploring the potential of a Ephedra alata leaf extract: Phytochemical analysis, antioxidant activity, antibacterial properties, and green synthesis of ZnO nanoparticles for photocatalytic degradation of methylene blue

Ephedra alata leaf extracts have therapeutic properties and contain various natural compounds known as phytochemicals. This study assessed the phytochemical content and antioxidant effects of a Ephedra alata leaf extract, as well as zinc oxide (ZnO) nanoparticle production. The extract contained phenolic acids, including vanillic acid, chlorogenic acid, gallic acid, p-coumaric acid, vanillin and rutin. Its total phenolic content and total flavonoid content were 48.7 ± 0.9 mg.g-1 and 1.7 ± 0.4 mg.g-1, respectively. The extract displayed a DPPH inhibition rate of 70.5%, total antioxidant activity of 49.5 ± 3.4 mg.g-1, and significant antimicrobial activity toward Gram-positive and negative bacteria. The synthesized ZnO nanoparticles had spherical shape, crystallite size of 25 nm, particle size between 5 and 30 nm, and bandgap energy of 3.3 eV. In specific conditions (90 min contact time, pH 7, and 25°C), these nanoparticles efficiently photodegraded 87% of methylene blue, suggesting potential applications for sustainable water treatment and pollution control.

Aloe vera assisted green synthesis of Ag and Cu co-doped ZnO nanoparticles and a comprehensive analysis of their structural, morphological, optical, electrical and antibacterial properties

This study investigates the potential of utilizing Aloe vera-assisted green synthesis with transition metal dopants of Ag and Cu for greater efficiency and sustainability in advanced scientific applications utilizing ZnO nanoparticles. Samples were prepared using the co-precipitation method, maintaining a basic pH media of 10. Aloe vera gel extract was chosen for its acclaimed role as a stabilizing and reducing agent and its proven antioxidant, antibacterial, and anticancer properties. The XRD report revealed the hexagonal Wurtzite crystal structure of nanoparticles, exhibiting a crystallite size range of 17-23 nm with substantial alterations in lattice parameters, dislocation density, and bond lengths when dopants were added. Additionally, EDX analysis confirmed the perfect doping of Ag and Cu in ZnO without any impurities. SEM analysis indicated a reduction in agglomeration, accompanied by a transition in particle morphology from columnar to globular. Additionally, the optical study showed a band gap range of 3.18-3.27 eV, confirming it to be a wide band gap semiconductor. The effect of dopants resulted in an increase in transparency and band gap, while a decrease in absorption coefficient in the visible wavelength region. With increasing temperature, a decline in electrical resistivity was noted, with co-doped nanoparticles consistently exhibiting the lowest resistivity, affirming semiconductor characteristics. Most importantly, A remarkable antibacterial efficacy was noticed at low concentrations against gram-positive (Staphylococcus aureus) and gram-negative (Escherichia coli) bacteria. The zone of inhibition produced by nanoparticles exhibited values akin to the antibiotic control, even at substantially lower doses. This research offers a comprehensive analysis of the effects of Ag and Cu in Aloe vera-assisted green-synthesized ZnO nanoparticles, concurrently addressing their potential applications in biomedical, energy storage, and optoelectronic devices.

Green synthesis of ZnO nanoparticles from ball moss (Tillandsia recurvata) extracts: characterization and evaluation of their photocatalytic activity

Green synthesis (GS), referred to the synthesis using bioactive agents such as plant materials, microorganisms, and various biowastes, prioritizing environmental sustainability, has become increasingly relevant in international scientific practice. The availability of plant resources expands the scope of new exploration opportunities, including the evaluation of new sources of organic extracts, for instance, to the best of our knowledge, no scientific articles have reported the synthesis of zinc oxide nanoparticles (ZnO NPs) from organic extracts of T. recurvata, a parasitic plant very common in semiarid regions of Mexico.This paper presents a greener and more efficient method for synthesizing ZnO NPs using T. recurvata extract as a reducing agent. The nanoparticles were examined by different techniques such as UV-vis spectroscopy, X-ray diffraction, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and BET surface analysis. The photocatalytic and adsorptive effect of ZnO NPs was investigated against methylene blue (MB) dye in aqueous media under sunlight irradiation considering an equilibrium time under dark conditions. ZnO nanoparticles were highly effective in removing MB under sunlight irradiation conditions, showing low toxicity towards human epithelial cells, making them promising candidates for a variety of applications. This attribute fosters the use of green synthesis techniques for addressing environmental issues.This study also includes the estimation of the supported electric field distributions of ZnO NPs in their individual spherical or rounded shapes and their randomly oriented organization, considering different diameters, by simulating their behavior in the visible wavelength range, observing resonant enhancements due to the strong light-matter interaction around the ZnO NPs boundaries.

Photocatalytic Degradation of Rhodamine-B and Water Densification via Eco-Friendly Synthesized Cr2O3 and Ag@Cr2O3 Using Garlic Peel Aqueous Extract

The purification and densification of wastewater play an important role in water recycling, especially if the materials used in water recycling are other types of recycled waste. Therefore, considering this view in this study, the biosynthesis of silver-decorated chromium oxide nanoparticles utilizing a wasted Allium sativum (garlic) peel extract is investigated. The aqueous extract of garlic peel (GPE) was treated with silver nitrate, chromium nitrate, and a mixture of silver nitrate and chromium nitrate to synthesize silver nanoparticles (Ag-garlic), chromium oxide nanoparticles (Cr2O3-garlic), and silver-decorated chromium oxide nanoparticles (Ag@Cr2O3-garlic), respectively. The synthesized nanoparticles were elucidated via thermal gravimetric analysis (TGA), infrared spectra (FT-IR), absorption spectra (UV-Vis), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Antimicrobial activity studies were conducted against waterborne germs, bacterial strains (Bacillus subtilis, Enterococcus faecium, Escherichia coli, and Pseudomonas aeruginosa), and fungal strains (Alternaria porri, Aspergillus flavus, Aspergillus niger, Fuserium oxysporum, and Trichoderma longibrachiatum) and showed significant levels of antimicrobial activity. The results revealed that Ag@Cr2O3 significantly improved antimicrobial activity due to their synergistic effect. The photocatalytic activity of nanoparticles was assessed using Rhodamine B dye (5 ppm) under solar irradiation. Cr2O3-garlic exhibited the best activity as a photocatalyst among the studied nanoparticles, with 97.5% degradation efficiency under optimal conditions.

Colloidal stability and dielectric behavior of eco-friendly synthesized zinc oxide nanostructures from Moringa seeds

This study centers on the environmentally benign synthesis of zinc oxide nanoparticles (ZnO NPs) derived from Zn (CH3COO)2·2H2O and Moringa seeds. The synthesized nanostructures underwent comprehensive characterization utilizing diverse analytical techniques, encompassing X-ray diffraction (XRD), UV-VIS spectroscopy, field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. XRD measurements coupled with W-H plot transformation unequivocally confirmed the formation of ZnO nanostructures, characterized by an average size of 24.9 nm. UV-VIS spectroscopy, complemented by Kubelka Munk curve analysis, elucidated the direct conduction and determined a bandgap of 3.265 eV. FESEM analysis revealed minimal particle aggregation, showcasing well-defined grain boundaries spanning sizes from 20.4 to 87.7 nm. XPS analysis substantiated the presence of Zn (2p), Zn (3p), Zn (3d), and O (1s). Raman spectroscopy identified E2H as the predominant mode, followed by E1(TO) and (E2H-E2L). ZnO thin films, fabricated via pulsed laser deposition (PLD) and deposited onto silicon (100) substrates, exhibited exemplary morphology and discernible topography, characterized by a normal grain size distribution. Zeta potential tests yielded a value of approximately ([Formula: see text] ~ - 43.8 mV), indicative of the commendable stability of the colloidal suspension, likely attributable to low particle aggregation. Dielectric measurements conducted on sintered pellets at 900 °C unveiled elevated capacitance and dielectric constant at low frequencies across the temperature range of 289.935-310 K. These findings affirm the potential utility of environmentally synthesized ZnO for a spectrum of applications, including energy devices and nanofluids.

The physical properties and photocatalytic activities of green synthesized ZnO nanostructures using different ginger extract concentrations

The green synthesis method which is aligned with the sustainable development goals (SDGs) theory, is proposed to synthesize ZnO nanoparticles using ginger extract to treat the acidic wastewater and acidic factory effluent as a current challenge and the effects of the concentration of extracts on the synthesized ZnO nanostructures are investigated. The results declare that the single-phase hexagonal ZnO is formed using ginger extract concentration of less than 25 mL and the crystallite size of green synthesized ZnO NPs increased with increasing the concentration of ginger extract. Also, the significant effects of ginger extract concentration on the morphology of nanoparticles (nanocone, nanoflakes, and flower-like) and the particle size are demonstrated. The low concentration of ginger extract leads to the formation of the ZnO nanoflakes, while the flower-like structure is gradually completed by increasing the concentration of the ginger extract. Furthermore, significant changes in the specific surface area (SSA) of the samples are observed (in the range of 6.1-27.7 m2/g) by the variation of ginger extract concentration and the best SSA is related to using 10 mL ginger extract. Also, the strong effect of using ginger extract on the reflectance spectra of the green synthesized ZnO NPs, especially in the UV region is proved. The indirect (direct) band gap energies of the ZnO samples are obtained in the range of 3.09-3.20 eV (3.32-3.38 eV). Furthermore, the photocatalytic activities of the samples for the degradation of methylene blue indicate the impressive effect of ginger extract concentration on the degradation efficiency of ZnO nanoparticles and it reaches up to 44% and 83% for ZnO NPs prepared using 5 mL ginger extract in a pH of 4.3 and 5.6, respectively. This study provided new insights into the fabrication and practical application of high-performance ZnO photocatalysts synthesized using ginger extract in degrading organic pollutants in an acidic solution.

Experimental and density functional theory studies on some metal oxides and the derived nanoclusters: a comparative effects on human ferritin

A comprehensive investigation into the green synthesis of metal oxide nanoparticles (NPs) has garnered significant attention due to its commendable reliability, sustainability, and environmentally friendly attributes. Green synthesis methods play a crucial role in mitigating the adverse effects associated with conventional approaches employed for nanostructure preparation. This research endeavors to examine the impact of ginger plant extract-assisted green synthesis of metal oxides NPs on the serum ferritin levels of anemic diabetic patients in vitro, focusing specifically on α-Fe2O3 and ZnO NPs. Sixty diabetic volunteers with anemia (35-50 years) and thirty healthy volunteers were enrolled as controls. The assessment was conducted using the VIDAS Ferritin (FER) assay. Photoluminescence (PL) spectroscopy measurements were performed to elucidate the intrinsic and extrinsic transitions of these NPs, affirming the successful formation of α-structured iron oxide. Density functional theory (DFT) calculations were carried out at the B3LYP/6-311++G(d,2p) level of theory to investigate the geometry optimization and molecular electrostatic potential maps of the NPs. Furthermore, TD-DFT calculations were employed to explore their frontier molecular orbitals and various quantum chemical parameters. The binding affinity and interaction types of ZnO and α-Fe2O3 NPs to the active site of the human H-Chain Ferritin (PDB ID: 2FHA) target were determined with the help of molecular docking. Results unveiled the crystalline structure of ZnO and the α-structure of α-Fe2O3. Analysis of the frontier molecular orbitals and dipole moment values demonstrated that ZnO (total dipole moment (D) = 5.80 µ) exhibited superior chemical reactivity, biological activity, and stronger molecular interactions with diverse force fields compared to α-Fe2O3 (D = 2.65 µ). Molecular docking of the metal oxides NPs with human H-chain ferritin provided evidence of robust hydrogen bond interactions and metal-acceptor bonds between the metal oxides and the target protein. This finding could have a great impact on using metal oxides NPs-ferritin as a therapeutic protein, however, further studies on their toxicity are required.

Advancement in nanomaterials for environmental pollutants remediation: a systematic review on bibliometrics analysis, material types, synthesis pathways, and related mechanisms

Environmental pollution is a major issue that requires effective solutions. Nanomaterials (NMs) have emerged as promising candidates for pollution remediation due to their unique properties. This review paper provides a systematic analysis of the potential of NMs for environmental pollution remediation compared to conventional techniques. It elaborates on several aspects, including conventional and advanced techniques for removing pollutants, classification of NMs (organic, inorganic, and composite base). The efficiency of NMs in remediation of pollutants depends on their dispersion and retention, with each type of NM having different advantages and disadvantages. Various synthesis pathways for NMs, including traditional synthesis (chemical and physical) and biological synthesis pathways, mechanisms of reaction for pollutants removal using NMs, such as adsorption, filtration, disinfection, photocatalysis, and oxidation, also are evaluated. Additionally, this review presents suggestions for future investigation strategies to improve the efficacy of NMs in environmental remediation. The research so far provides strong evidence that NMs could effectively remove contaminants and may be valuable assets for various industrial purposes. However, further research and development are necessary to fully realize this potential, such as exploring new synthesis pathways and improving the dispersion and retention of NMs in the environment. Furthermore, there is a need to compare the efficacy of different types of NMs for remediating specific pollutants. Overall, this review highlights the immense potential of NMs for mitigating environmental pollutants and calls for more research in this direction.

Green synthesis of MnO2-embedded Rauvolfia tetraphylla leaves (MnO2@RTL) for crystal violet dye removal and as an antibacterial agent

The application of green synthesized nanocomposites for the prevention of environmental pollution is increasing nowadays. Here, a green composite has been synthesized by embedding MnO2 on Rauvolfia tetraphylla leaves using its leaf extract hereinafter termed as MnO2@RTL, and demonstrated for crystal violet (CV) dye removal from simulated and real wastewater. The surface properties of the material were determined by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectra (FTIR), X-ray diffraction (XRD), and Brunauer-Emmet-Teller (BET) surface area, pHZPC, and zeta potential. The material exhibits a remarkable adsorption capacity of 61.162 mg/g at 328 K and pH 7. The adsorption was best fitted with Pseudo-second-order kinetic (R2 = 0.998) and a combination of Langmuir and Freundlich isotherm model (R2 = 0.994-0.999). The thermodynamic study revealed spontaneous (ΔG values =  - 2.988 to - 4.978 kJ/mol) and endothermic (ΔH values = 6.830 to 11.018 kJ/mol) adsorption. After adsorption, 80% regeneration occurred with 50% methanol, and recycled up to five times. Advantageously, the material was able to remove CV dye in the presence of coexistent ions and from industrial wastewater, confirming field applicability. The adsorption capacity of the material is superior to previously reported materials. The standard deviation and relative standard deviations have been evaluated to be 0.000422-0.000667 and 0.473-0.749%, which suggests the reliability of the experiments. The exhausted material, after recycling, was pyrolyzed to overcome the disposal problem. It was established as a secondary adsorbent with 73% efficiency which makes the material win-win. The material showed antibacterial properties with Staphylococcus aureus bacteria with a zone of inhibition 5 mm.

Improvement of the optical, photocatalytic and antibacterial properties of ZnO semiconductor nanoparticles using different pepper aqueous extracts

Peppers are fruits that grow on plants of the genus Capsicum and are popular for their use in gastronomy as a condiment and for their anti-inflammatory and anti-cancer properties due to their phytocompounds such as flavonoids, polyphenols, or alkaloids. Semiconductor zinc oxide (ZnO) nanoparticles (NPs) were synthesized using a green approach employing natural aqueous extracts of several varieties of peppers (jalapeño, morita, and ghost). The obtained NPs were characterized by different techniques, and their photocatalytic and antibacterial activity was studied. The signal at 620 cm-1 in the FTIR spectra belonging to the Zn-O bond, the appearance of the main peaks of a hexagonal wurtzite structure in the XRD pattern, and the characteristic signals in the UV-Vis spectra confirm the correct formation of ZnO NPs. The photocatalytic activity was analyzed against Methylene Blue (MB), Rhodamine B (RB), and Methyl Orange (MO) under UV and sunlight. All syntheses were able to degrade more than 93% of the pollutants under UV light. Antibacterial assays were performed against gram-positive and gram-negative bacteria. All syntheses exhibited antibacterial activity against all bacteria and maximum growth inhibition against Bacillus subtilis. The prominent results demonstrate that natural aqueous extracts obtained from peppers can be used to synthesize ZnO NPs with photocatalytic and biomedical applications.

Non-conventional, burnt Shorea robusta leaf extract mediated green synthesis of zinc oxide nanoparticles and facile removal of eriochrome black T dye from water

The present study evaluates the synthesis of zinc oxide nanoparticles (ZnO NPs) using water extract of Sal leaves (Shorea Robusta) for efficient removal of Eriochrome black-T from the water and wastewater. The material is characterized using FESEM, FTIR, EDX, pHzpc, XRD, BET, and TGA analysis. XRD confirmed the synthesis of ZnO with an average crystallite size of 35.24 nm a surface area of 95.939 m2/g and a pore volume of 0.280 cm3/g. The pHzpc of the material is 7.45. The study evaluates the effects of contact time (0-100 min), pH (3-10), concentration (10-50 mg/L), and temperature (298-328K). The Langmuir isotherm model (R2 = 0.993) and pseudo-second-order kinetic model (R2 = 0.998) were found to be the best-fit models. The maximum uptake capacity is 265.554 mg/g. The interaction is spontaneous (ΔG° -12.889 to-14.898 kJ/mol), endothermic ΔH° (4.290-14.216 kJ/mol) with an increase in spontaneity at the solid-liquid junction. The dye-loaded ZnO NPs were successfully regenerated in dilute NaOH solution and 1:1 methanol water, achieving regeneration efficiencies of 78% and 60%, respectively. The reusability of the ZnO NPs was ascertained for up to three consecutive cycles.

Probing the molecular mechanism of interaction between polystyrene nanoplastics and catalase by multispectroscopic techniques

Nanoplastics are emerging pollutants that pose a potential threat to the environment and organisms and are widely distributed in environmental samples and food chains. The accumulation of polystyrene nanoplastics (PS-NPs) in an organism can cause oxidative stress. Currently, toxicity studies of PS-NPs mainly focus on the individual and cellular levels, whereas few studies have been conducted on the molecular mechanisms of the interaction between PS-NPs and catalase (CAT). Based on this, CAT was chosen as the target receptor for molecular toxicity research to reveal the interaction mechanism at the molecular level between PS-NPs and CAT by using various spectroscopic means and enzyme activity detection methods. The results indicated that PS-NPs destroyed the secondary structure of CAT, causing its protein skeleton to loosen and unfold, increasing the content of α-helices, decreasing the content of β-sheets, and exposing the position of the heme group. After exposure to PS-NPs, the internal fluorophore of CAT underwent fluorescence sensitization, resulting in a micelle-like structure, which enhanced the hydrophobicity of aromatic amino acids but did not change their polarity. In addition, the aggregation state of CAT was altered upon binding to PS-NPs, and the volume was further increased. Finally, these structural changes led to a gradual decrease in CAT activity. This study presents a comprehensive assessment of the toxicity of PS-NPs at the molecular level, which can provide more experimental support for the study of the biotoxicological efficacy of PS-NPs.

Green inspired synthesis of zinc oxide nanoparticles using Silybum marianum (milk thistle) extract and evaluation of their potential pesticidal and phytopathogens activities

Background

The green approaches for the synthesis of nanoparticles are gaining significant importance because of their high productivity, purity, low cost, biocompatibility, and environmental friendliness.

Methods

The aim of the current study is the green synthesis of zinc oxide nanoparticles (ZnO-NPs) using seed extracts of Silybum marianum, which acts as a reducing and stabilizing agent. central composite design (CCD) of response surface methodology (RSM) optimized synthesis parameters (temperature, pH, reaction time, plant extract, and salt concentration) for controlled size, stability, and maximum yields of ZnO-NPs. Green synthesized ZnO-NPs was characterized using UV-visible spectroscopy and Zetasizer analyses.

Results

The Zetasizer confirmed that green synthesized ZnO-NPs were 51.80 nm in size and monodispersed in nature. The UV-visible results revealed a large band gap energy in the visible region at 360.5 nm wavelength. The bioactivities of green synthesized ZnO-NPs, including antifungal, antibacterial, and pesticidal, were also evaluated. Data analysis confirmed that these activities were concentration dependent. Bio-synthesized ZnO-NPs showed higher mortality towards Tribolium castaneum of about 78 ± 0.57% after 72 h observation as compared to Sitophilus oryzae, which only displayed 74 ± 0.57% at the same concentration and time intervals. Plant-mediated ZnO-NPs also showed high potential against pathogenic gram-positive bacteria (Clavibacter michiganensis), gram-negative bacteria (Pseudomonas syringae), and two fungal strains such as Fusarium oxysporum, and Aspergillums niger with inhibition zones of 18 ± 0.4, 25 ± 0.4, 21 ± 0.57, and 19 ± 0.4 mm, respectively.

Conclusion

The results of this study showed that Silybum marianum-based ZnO-NPs are cost-effective and efficient against crop pests.

Peumus boldus Used in the Synthesis of ZnO Semiconductor Nanoparticles and Their Evaluation in Organic Contaminants

The high demand for nanomaterials in the field of industry and science has forced researchers to develop new synthesis methods that are more efficient, economical, and environmentally friendly. At present, the application of green synthesis has taken a great advantage over conventional synthesis methods because it helps with the control of the characteristics and properties of the resulting nanomaterials. In this research, ZnO nanoparticles (NPs) were synthesized by biosynthesis using dried boldo (Peumus boldus) leaves. The resulting biosynthesized NPs had a high purity, quasi-spherical shape with average sizes ranging from 15 to 30 nm and a band gap of ~2.8-3.1 eV. These NPs were used in the photocatalytic activity of three organic dyes. The results showed degradation of 100% methylene blue (MB) in 180 min, 92% methyl orange (MO) in 180 min, and 100% Rhodamine B (RhB) in 30 min of exposure. These results show that the Peumus boldus leaf extract is effective in the biosynthesis of ZnO NPs with good photocatalytic properties.

Recent progress on plant extract-mediated biosynthesis of ZnO-based nanocatalysts for environmental remediation: Challenges and future outlooks

The plant extract mediated green synthesis of nanomaterials has attracts enormous interest due to its cost-effectiveness, greener, and environmentally friendly. It is also considered as an alternative and facile method in which the phytochemicals can be used as a natural capping and reducing agents and helped to produce nanomaterials with high surface area, different sizes, and shapes. One of the materials fabricated using green methods is zinc oxide (ZnO) semiconductor due to its enormous applications in different field areas. In this review, an overview of recent progress on green synthesized ZnO-based catalysts and various modification methods for the purpose of enhancing the catalytic activity of ZnO and the corresponding structural-activity and interactions towards the removal of pollutants are highlighted. Particularly, the plant extract mediated ZnO-based photocatalysts application for the removal of pollutants via photocatalytic degradation, reduction reaction, and adsorption mechanism are demonstrated. Besides, the opportunities, challenges, and future outlooks of ZnO-based materials for environmental remediation with green and sustainable methods are also included. We believe that this review is a timely and comprehensive review on the recent progress related to plant extract mediated ZnO-based nanocatalysts synthesis and applications for environmental remediation.

Metal Oxides Nanoparticles: General Structural Description, Chemical, Physical, and Biological Synthesis Methods, Role in Pesticides and Heavy Metal Removal through Wastewater Treatment

Nanotechnology (NT) is now firmly established in both the private home and commercial markets. Due to its unique properties, NT has been fully applied within multiple sectors like pharmacy and medicine, as well as industries like chemical, electrical, food manufacturing, and military, besides other economic sectors. With the growing demand for environmental resources from an ever-growing world population, NT application is a very advanced new area in the environmental sector and offers several advantages. A novel template synthesis approach is being used for the promising metal oxide nanostructures preparation. Synthesis of template-assisted nanomaterials promotes a greener and more promising protocol compared to traditional synthesis methods such as sol-gel and hydrothermal synthesis, and endows products with desirable properties and applications. It provides a comprehensive general view of current developments in the areas of drinking water treatment, wastewater treatment, agriculture, and remediation. In the field of wastewater treatment, we focus on the adsorption of heavy metals and persistent substances and the improved photocatalytic decomposition of the most common wastewater pollutants. The drinking water treatment section covers enhanced pathogen disinfection and heavy metal removal, point-of-use treatment, and organic removal applications, including the latest advances in pesticide removal.

Synergistic Anticandidal Activities of Greenly Synthesized ZnO Nanomaterials with Commercial Antifungal Agents against Candidal Infections

The high occurrence of mycological resistance to conventional antifungal agents results in significant illness and death rates among immunodeficient patients. In addition, the underprivileged therapeutic results of conventional antifungal agents, besides the potential toxicity resulting from long term therapy necessitate the fabrication of efficient antimicrobial combinations. Hence, the objective of the present investigation is to synthesize, characterize and investigate the anticandidal action of green zinc oxide nanoparticles (ZnO-NPs) formulated using Camellia sinensis leaf extract against three candidal pathogens. The eco-friendly synthesized ZnO-NPs were characterized utilizing different physicochemical methods and their anticandidal potency was tested utilizing a disk diffusion assay. In this setting, the size of the biofabricated ZnO-NPs was detected using transmission electron microscope (TEM) micrographs, recording an average particle size of 19.380 ± 2.14 nm. In addition, zeta potential analysis revealed that the ZnO-NPs surface charge was -4.72 mV. The biogenic ZnO-NPs reveal the highest anticandidal activity against the C. tropicalis strain, demonstrating relative suppressive zones measured at 35.16 ± 0.13 and 37.87 ± 0.24 mm in diameter for ZnO-NPs concentrations of 50 and 100 μg/disk, respectively. Excitingly, Candida glabrata showed a high susceptibility to the biofabricated ZnO nanomaterials at both ZnO-NPs' concentrations (50 and 100 μg/disk) compared to the control. Moreover, the biosynthesized ZnO-NPs revealed potential synergistic effectiveness with nystatin and terbinafine antifungal agents against the concerned strains. The maximum synergistic efficiency was noticed against the C. glabrata strain, demonstrating relative synergistic percentages of 23.02 and 45.9%, respectively. The biogenic ZnO-NPs revealed no hemolytic activity against human erythrocytes revealing their biosafety and hemocompatibility. Finally, the high anticandidal effectiveness of biogenic ZnO-NPs against the concerned candidal pathogens, as well as potential synergistic patterns with conventional antifungal agents such as nystatin and terbinafine, emphasize the prospective application of these combinations for the fabrication of biocompatible and highly efficient antifungal agents.

Development of zinc ferrite nanoparticles with enhanced photocatalytic performance for remediation of environmentally toxic pharmaceutical waste diclofenac sodium from wastewater

Diclofenac sodium is an anti-inflammatory drug commonly used to cure pain in various treatments. The remarkable potential of this pain-killer leads to its excessive use and, therefore, a persistent water contaminant. Its presence in aqueous bodies is hazardous for both humans and the environment because it causes the growth of harmful drug-resistant bacteria in water. Herein, we present a comparative study of the ZnO and ZnFe₂O₄ as photocatalysts for the degradation of diclofenac sodium, along with their structural and morphological studies. A simple co-precipitation method was used for the synthesis of ZnO and ZnFe₂O₄ and characterized by various analytical techniques. For instance, the UV-Vis study revealed the absorption maxima of ZnO at 320 nm, which was shifted to a longer wavelength region at 365 nm for zinc ferrite. The optical band gaps obtained from the Tauc plot indicated that the incorporation of iron has led to a decreased band gap of zinc ferrite (2.89 eV) than pure ZnO (3.14 eV). The metal-oxygen linkages shown by FTIR indicated the formation of desired ZnO and ZnFe₂O₄, which was further confirmed by XRD. It elucidated the typical hexagonal structure for ZnO and spinel cubic structure for ZnFe₂O₄ with an average crystallite of 31 nm and 44 nm for ZnO and ZnFe₂O₄, respectively. The micrographs obtained by SEM showed rough spherical particles of ZnO, whereas for ZnFe₂O₄ flower-like clustered particles were observed. The photocatalytic investigation against diclofenac sodium revealed the higher degradation efficiency of ZnFe₂O₄ (61.4%) in only 120 min, whereas ZnO degraded only 48.9% of the drug. Moreover, zinc ferrite has shown good recyclability and was stable up to five runs of photodegradation with a small loss (3.9%) of photocatalytic activity. The comparison of two catalysts has suggested the promising role of zinc ferrite in wastewater remediation to eliminate hazardous pharmaceuticals.

Bryophyllum pinnatum leaf extract mediated ZnO nanoparticles with prodigious potential for solar driven photocatalytic degradation of industrial contaminants

In an era of environment-friendly development plant extract-based biological techniques for synthesizing nanoparticles have gained a lot of attention over traditionally famous chemical and physical synthesis techniques. In the present study we have synthesized biogenic zinc oxide nanoparticles (BPLE-ZnO NPs) using Bryophyllum pinnatum leaf extract, compared its native properties and solar-driven photocatalytic activity with chemically prepared ZnO nanoparticles (Chem-ZnO NPs). In order to characterize and compare the Chem-ZnO and BPLE-ZnO, various techniques were used, including UV-visible spectroscopy, x-ray diffractrometry, photoluminescence spectroscopy, field emission scanning electron microscopy, electron dispersive x-ray spectroscopy, fourier transform infrared spectroscopy, and zeta potential analyzer. The results revealed the formation of hexagonal wurtzite ZnO, with no significant difference between the two methods; however, the use of Bryophyllum pinnatum leaf extract in ZnO NPs synthesis resulted in reduced size, presence of biomolecules on its surface and better monodispersity than purely chemical synthesis. Further, the BPLE-ZnO NPs showed better efficiency in the solar-driven photocatalytic degradation of methylene blue (MB) dye compared to Chem-ZnO NPs. Under solar exposure at a dose of 0.50 mg/mL BPLE-ZnO, resulted in 97.31% photodegradation with a rate constant of 0.06 min-1 of 20 mg/L MB solution within just 60 min which was 9.51% higher compared to the Chem-ZnO NPs. The BPLE-ZnO NPs were also employed to investigate their solar-driven photocatalytic performance for degrading the pharmaceutical (Metronidazole and Amoxycillin) and textile pollutants (Methyl orange dye) under sunlight. The results show that Bryophyllum pinnatum leaf extract-mediated ZnO NPs have an excellent potential in solar-based photocatalytic applications.

ZnO and Ag NP-decorated ZnO nanoflowers: green synthesis using Ganoderma lucidum aqueous extract and characterization

Fungi produce and excrete various proteins, enzymes, polysaccharides, and secondary metabolites, which may be used as media for the "green" synthesis of metal and semiconductor nanoparticles (NPs). ZnO NPs with a flower-like morphology were synthesized by an affordable colloidal route, using an aqueous extract of Ganoderma lucidum as a reducing agent and stabilizer. Each individual "flower" has a large effective surface, which is preserved when the particles are close packed into a dense film, which is advantageous for numerous applications. The phonon Raman spectrum and X-ray diffraction (XRD) pattern prove the high crystallinity of the NPs, with the distinct pattern of a hexagonal (wurtzite) lattice, negligible residual stress, and a crystallite size of 12-14 nm determined from the XRD. The photoluminescence (PL) spectrum of the as-synthesized ZnO NPs contains a structured defect-related feature in the violet-blue range, while the green PL, common for nanostructures synthesized by "green" routes, is very weak. By applying dimethylsulfoxide as an additional passivating agent, the excitonic (UV) PL band was activated without enhancement of the defect-related features. Ag NP-decorated ZnO flowers were synthesized by subsequent silver reduction by pepper extract. The ZnO/Ag NPs exhibited efficient surface-enhanced Raman scattering (SERS) of a standard dye analyte, rhodamine 6G, ensuring the feasibility of other applications that require close contact of ZnO/Ag to other nanostructures or molecules to realize the energy of the charge transfer.

Functionalized magnetic nanostructured composites and hybrids for photocatalytic elimination of pharmaceuticals and personal care products

Due to rapid urbanization and globalization, an enormous use of pharmaceuticals and personal care products (PPCPs) has resulted their excessive release in water bodies leading to several environmental issues. This release into the environment takes place via household sewage, hospital effluents, manufacturing units and landfill sites etc. The pharmaceuticals and personal care products (PPCPs) are recently listed as emerging contaminants having many adverse effects towards aquatic life, human beings, and the whole ecosystem. The alarming threats of PPCPs demand efficient methods to cope up their hazardous impacts. The conventional wastewater remediations are not specifically designed for the removal of PPCPs and hence, they require advanced technologies and materials for their elimination to ensure water safety. Among various methods employed so far, photocatalysis is considered to be one of the most cost effective and eco-friendly method but it requires a suitable candidate as a photocatalyst. Thanks to the magnetic nanocomposites which have improved the limitations (poor stability, agglomeration, and difficult separation, etc.) of classically used nanomaterials. Magnetic nanocomposites contain at least one component having magnetic properties making their separation easy from the aqueous media after the photodegradation phenomenon. These can be further functionalized with other materials to obtain maximum advantage as photocatalyst. Few examples of such functionalized nanocomposites are inorganic material based magnetic nanocomposites, carbon based magnetic nanocomposites, biomaterial based magnetic nanocomposites, metal-organic framework based magnetic nanocomposites and polymer based magnetic nanocomposites etc. This review covers the global environmental issue of water pollution especially with respect to the PPCPs, their occurrence in aqueous environment and toxic effects on living beings. A comprehensive discussion of the recently reported functionalized magnetic nanocomposites for the photocatalytic removal of PPCPs from water is the main aim of this review. The synthetic/morphological approaches of various functionalized magnetic composites and their mechanism of action are also elaborated. The possible research challenges in the field of magnetic nanocomposites and future research directions are discussed to apply magnetic nanocomposites for wastewater treatment in near future.

A review on synthesis methods and recent applications of nanomaterial in wastewater treatment: Challenges and future perspectives

Freshwater has been incessantly polluted by various activities such as rapid industrialization, fast growth of population and agricultural activities. Water pollution is considered as one the major threatens to human health and aquatic bodies which causes various severe harmful diseases including gastrointestinal disorders, asthma, cancer, etc. The polluted wastewater could be treated by different conventional and advanced methodologies. Amongst them, adsorption is the most utilized low cost, efficient technique to treat and remove the harmful pollutants from the wastewater. The efficiency of adsorption mainly depends on the surface properties such as functional group availability and surface area of the adsorbents used. Since various waste-based carbon derivatives are utilized as adsorbents for harmful pollutants removal; nanomaterials are employed as effective adsorbents in recent times due to its excellent surface properties. This review presents an overview of the different types of nanomaterials such as nano-particles, nanotubes, nano-sheets, nano-rods, nano-spheres, quantum dots, etc. which have been synthesized by different chemical and green synthesis methodologies using plants, microorganisms, biomolecules and carbon derivatives, metals and metal oxides and polymers. By concentrating on potential research difficulties, this study offers a new viewpoint on fundamental field of nanotechnology for wastewater treatment applications. This review paper critically reviewed the synthesis of nanomaterials more importantly green synthesis and their applications in wastewater treatment to remove the harmful pollutants such as heavy metals, dyes, pesticides, polycyclic aromatic hydrocarbons, etc.

Catalytic dye degradation by novel phytofabricated silver/zinc oxide composites

Phytofabrication of the nanoparticles with exotic shape and size is an attractive area where nanostructures with noteworthy physicochemical and optoelectronic properties that can be significantly employed for photocatalytic dye degradation. In this study a medicinal plant, Plumbago auriculata leaf extract (PALE) was used to synthesize zinc oxide particles (ZnOPs) and silver mixed zinc oxide particles (ZnOAg1Ps, ZnOAg10Ps, ZnO10Ag1Ps) by varying the concentration of the metal precursor salts, i.e. zinc acetate and silver nitrate. The PALE showed significantly high concentrations of polyphenols, flavonoids, reducing sugar, starch, citric acid and plumbagin up to 314.3 ± 0.33, 960.0 ± 2.88, 121.3 ± 4.60, 150.3 ± 3.17, 109.4 ± 2.36, and 260.4 ± 8.90 μg/ml, respectively which might play an important role for green synthesis and capping of the phytogenic nanoparticles. The resulting particles were polydispersed which were mostly irregular, spherical, hexagonal and rod like in shape. The pristine ZnOPs exhibited a UV absorption band at 352 nm which shifted around 370 in the Ag mixed ZnOPs with concomitant appearance of peaks at 560 and 635 nm in ZnO10Ag1Ps and ZnOAg1Ps, respectively. The majority of the ZnOPs, ZnOAg1Ps, ZnOAg10Ps, and ZnO10Ag1Ps were 407, 98, 231, and 90 nm in size, respectively. Energy dispersive spectra confirmed the elemental composition of the particles while Fourier transform infrared spectra showed the involvement of the peptide and methyl functional groups in the synthesis and capping of the particles. The composites exhibited superior photocatalytic degradation of methylene blue dye, maximum being 95.7% by the ZnOAg10Ps with a rate constant of 0.0463 s−1 following a first order kinetic model. The present result clearly highlights that Ag mixed ZnOPs synthesized using Plumbago auriculata leaf extract (PALE) can play a critical role in removal of hazardous dyes from effluents of textile and dye industries. Further expanding the application of these phytofabricated composites will promote a significant complementary and alternative strategy for treating refractory pollutants from wastewater.

Adsorption and Photocatalytic Degradation of Pesticides into Nanocomposites: A Review

The extensive use of pesticides in agriculture has significantly impacted the environment and human health, as these pollutants are inadequately disposed of into water bodies. In addition, pesticides can cause adverse effects on humans and aquatic animals due to their incomplete removal from the aqueous medium by conventional wastewater treatments. Therefore, processes such as heterogeneous photocatalysis and adsorption by nanocomposites have received special attention in the scientific community due to their unique properties and ability to degrade and remove several organic pollutants, including pesticides. This report reviews the use of nanocomposites in pesticide adsorption and photocatalytic degradation from aqueous solutions. A bibliographic search was performed using the ScienceDirect, American Chemical Society (ACS), and Royal Society of Chemistry (RSC) indexes, using Boolean logic and the following descriptors: "pesticide degradation" AND "photocatalysis" AND "nanocomposites"; "nanocomposites" AND "pesticides" AND "adsorption". The search was limited to research article documents in the last ten years (from January 2012 to June 2022). The results made it possible to verify that the most dangerous pesticides are not the most commonly degraded/removed from wastewater. At the same time, the potential of the supported nanocatalysts and nanoadsorbents in the decontamination of wastewater-containing pesticides is confirmed once they present reduced bandgap energy, which occurs over a wide range of wavelengths. Moreover, due to the great affinity of the supported nanocatalysts with pesticides, better charge separation, high removal, and degradation values are reported for these organic compounds. Thus, the class of the nanocomposites investigated in this work, magnetic or not, can be characterized as suitable nanomaterials with potential and unique properties useful in heterogeneous photocatalysts and the adsorption of pesticides.

Biogenic Synthesis of Copper-Based Nanomaterials Using Plant Extracts and Their Applications: Current and Future Directions

Plants have been used for multiple purposes over thousands of years in various applications such as traditional Chinese medicine and Ayurveda. More recently, the special properties of phytochemicals within plant extracts have spurred researchers to pursue interdisciplinary studies uniting nanotechnology and biotechnology. Plant-mediated green synthesis of nanomaterials utilises the phytochemicals in plant extracts to produce nanomaterials. Previous publications have demonstrated that diverse types of nanomaterials can be produced from extracts of numerous plant components. This review aims to cover in detail the use of plant extracts to produce copper (Cu)-based nanomaterials, along with their robust applications. The working principles of plant-mediated Cu-based nanomaterials in biomedical and environmental applications are also addressed. In addition, it discusses potential biotechnological solutions and new applications and research directions concerning plant-mediated Cu-based nanomaterials that are yet to be discovered so as to realise the full potential of the plant-mediated green synthesis of nanomaterials in industrial-scale production and wider applications. This review provides readers with comprehensive information, guidance, and future research directions concerning: (1) plant extraction, (2) plant-mediated synthesis of Cu-based nanomaterials, (3) the applications of plant-mediated Cu-based nanomaterials in biomedical and environmental remediation, and (4) future research directions in this area.

Comparative Study of SnO2 and ZnO Semiconductor Nanoparticles (Synthesized Using Randia echinocarpa) in the Photocatalytic Degradation of Organic Dyes

Symmetry in nanomaterials is essential to know the behavior of their properties. In the present research, the photocatalytic properties of SnO2 and ZnO nanoparticles were compared for the degradation of the cationic dyes Methylene Blue (MB) and Rhodamine B (RB). The nanoparticles were obtained through a green synthesis process assisted by Randia echinocarpa extracts; they were then analyzed through Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) to characterize their structure. Transmission electron microscopy (TEM) was used to identify the morphology and disclose nanoparticle size, and the optical properties were studied through Ultraviolet–visible spectroscopy (UV–Vis). The results show that the synthesized SnO2 and ZnO nanomaterials have quasispherical morphologies with average sizes of 8–12 and 4–6 nm, cassiterite and wurtzite crystal phases, and band gap values of 3.5 and 3.8 eV, respectively. The photocatalytic activity yielded 100% degradation of the MB and RB dyes in 210 and 150 min, respectively. ZnO performed higher photocatalytic degradation of the cationic dyes than SnO2 due to a higher content of Randia echinocarpa extracts remaining after the green synthesis process.

Synthesis of nZnO from waste batteries by hydrometallurgical method for photocatalytic degradation of organic pollutants under visible light irradiation

Waste zinc carbon (Zn-C) batteries are generated worldwide in a large amount. They are non-rechargeable and costly to recycle. Therefore, they end up in the landfills where they create hazards for humans and for environment as well. Zn-C batteries are rich in concentration of different heavy metals so they can be subjected for the recovery of metals for the development of valuable new materials. In this study authors have proposed an easy hydrometallurgical method for the recovery of zinc from waste Zn-C batteries to synthesize nano zinc oxide (nZnO) photocatalyst. The prepared nZnO particles were irregular in shape, highly crystalline in nature with crystallite size 23.94 nm. The band gap of the photocatalyst was 3.1 eV. The photocatalytic activity of the synthesised nZnO was tested for the degradation of three organic pollutants namely; phenol, p-nitrophenol (PNP) and crystal violet dye (CV) in an aqueous solution under visible light irradiation. nZnO showed a good catalytic efficiency for the degradation of all the three pollutants, however, the crystal violet (CV) removal was best in comparison with the other pollutants, it was minimally effected by the increase in CV concentration. The maximum degradation of phenol, PNP and CV was found to be 95.03 ± 0.2%, 88.63 ± 0.1% and 97.87 ± 0.4%, respectively. The degradation data was fitted best with pseudo-first-order kinetic model. The photocatalyst was recyclable and its regeneration ability was higher for initial three cycles. The intermediate compounds formed in the process of degradation were determined by liquid chromatography and mass spectroscopy (LC-MS) analysis.

Evaluation of the Photocatalytic Activity of Distinctive-Shaped ZnO Nanocrystals Synthesized Using Latex of Different Plants Native to the Amazon Rainforest

ZnO nanocrystals with three different morphologies have been synthesized via a simple sol-gel-based method using Brosimum parinarioides (bitter Amapá) and Parahancornia amapa (sweet Amapá) latex as chelating agents. X-ray diffraction (XRD) and electron diffraction patterns (SAED) patterns showed the ZnO nanocrystals were a pure hexagonal wurtzite phase of ZnO. XRD-based spherical harmonics predictions and HRTEM images depicted that the nanocrystallites constitute pitanga-like (~15.8 nm), teetotum-like (~16.8 nm), and cambuci-like (~22.2 nm) shapes for the samples synthesized using bitter Amapá, sweet Amapá, and bitter/sweet Amapá chelating agent, respectively. The band gap luminescence was observed at ~2.67-2.79 eV along with several structural defect-related, blue emissions at 468-474 nm (V_O, V_Zn, Zn_i), green emissions positioned at 513.89-515.89 (h-VO+), and orange emission at 600.78 nm (VO+-VO++). The best MB dye removal efficiency (85%) was mainly ascribed to the unique shape and oxygen vacancy defects found in the teetotum-like ZnO nanocrystals. Thus, the bitter Amapá and sweet Amapá latex are effective chelating agents for synthesizing distinctive-shaped ZnO nanocrystals with highly defective and remarkable photocatalytic activity.

Green Nanotechnology: Recent Research on Bioresource-Based Nanoparticle Synthesis and Applications

In the last decades, the idea of green nanotechnology has been expanding, and researchers are developing greener and more sustainable techniques for synthesizing nanoparticles (NPs). The major objectives are to fabricate NPs using simple, sustainable, and cost-effective procedures while avoiding the use of hazardous materials that are usually utilized as reducing or capping agents. Many biosources, including plants, bacteria, fungus, yeasts, and algae, have been used to fabricate NPs of various shapes and sizes. The authors of this study emphasized the most current studies for fabricating NPs from biosources and their applications in a wide range of fields. This review addressed studies that cover green techniques for synthesizing nanoparticles of Ag, Au, ZnO, CuO, Co3O4, Fe3O4, TiO2, NiO, Al2O3, Cr2O3, Sm2O3, CeO2, La2O3, and Y2O3. Also, their applications were taken under consideration and discussed.

Omics approaches in bioremediation of environmental contaminants: An integrated approach for environmental safety and sustainability

Non-degradable pollutants have emerged as a result of industrialization, population growth, and lifestyle changes, endangering human health and the environment. Bioremediation is the process of clearing hazardous contaminants with the help of microorganisms, and cost-effective approach. The low-cost and environmentally acceptable approach to removing environmental pollutants from ecosystems is microbial bioremediation. However, to execute these different bioremediation approaches successfully, this is imperative to have a complete understanding of the variables impacting the development, metabolism, dynamics, and native microbial communities' activity in polluted areas. The emergence of new technologies like next-generation sequencing, protein and metabolic profiling, and advanced bioinformatic tools have provided critical insights into microbial communities and underlying mechanisms in environmental contaminant bioremediation. These omics approaches are meta-genomics, meta-transcriptomics, meta-proteomics, and metabolomics. Moreover, the advancements in these technologies have greatly aided in determining the effectiveness and implementing microbiological bioremediation approaches. At Environmental Protection Agency (EPA)-The government placed special emphasis on exploring how molecular and "omic" technologies may be used to determine the nature, behavior, and functions of the intrinsic microbial communities present at pollution containment systems. Several omics techniques are unquestionably more informative and valuable in elucidating the mechanism of the process and identifying the essential player's involved enzymes and their regulatory elements. This review provides an overview and description of the omics platforms that have been described in recent reports on omics approaches in bioremediation and that demonstrate the effectiveness of integrated omics approaches and their novel future use.

Enhanced Ciprofloxacin Removal from Aqueous Solution Using a Chemically Modified Biochar Derived from Bamboo Sawdust: Adsorption Process Optimization with Response Surface Methodology

Contamination of water by ciprofloxacin has become a significant concern due to its adverse health effects and growing evidence of antimicrobial-resistant gene evolution. To this end, a chemically modified bamboo biochar was prepared from bamboo sawdust to effectively remove ciprofloxacin (CIP) from an aqueous solution. Under similar adsorption conditions, the modified bamboo biochar (MBC) has an excellent CIP removal efficiency (96%) compared to unmodified bamboo biochar (UBC) efficiency (45%). Thus, MBC was used in batch adsorption experiments, and the process was optimized with the central composite design (CCD) framework of response surface methodology (RSM). Sorption process parameters such as initial CIP concentration, pH, adsorbent dose, and contact time were studied and found to have a significant effect on CIP removal. The optimal CIP removal (96%) was obtained at MBC dose (0.5 g L-1), CIP initial concentration (20 mg L-1), pH (7.5), and contact time (46 min). The adsorption kinetic data were well described by the pseudo-second-order model ( $R^2=0.999$ ), and both Langmuir ( $R^2=0.994$ ) and Freundlich ( $R^2=0.972$ ) models gave the best fit in CIP adsorption isotherm analysis. The maximum monolayer adsorption capacity of the MBC was 78.43 mg g-1 based on the Langmuir isotherm model. These results suggest that CIP adsorption was mainly controlled by chemisorption. Moreover, the CIP adsorption process was endothermic and spontaneous. Overall, MBC is a low-cost, efficient, and recyclable adsorbent for eliminating emerging contaminants such as ciprofloxacin from an aqueous solution.

Combined Effect of Zinc Oxide Nanoparticles and Bacteria on Osmolytes and Antioxidative Parameters of Rice (Oryza sativa L.) Plant Grown in Heavy Metal-Contaminated Water

With the advancement in nanotechnology, the use of nanoparticles has been enhanced dramatically in biomedical, agriculture, and industrial processes. However, the combined effect of nanoparticles and bacteria on plant growth in heavy metal (Cd, Cr, Cu, and Pb)-contaminated wastewater is greatly limited. Therefore, the recent work was designed to determine the synergistic impact of green synthesized zinc oxide nanoparticles (ZnO-NPs) (5-10 mg/L) and Bacillus spp. (Bacillus cereus and Lysinibacillus macroides) on the physiological and biochemical activities of rice seedlings under heavy metal- (HM-) contaminated water. The results revealed that germination percentage (36%), root-shoot length (5.11 and 3.41 cm), fresh shoot-root weight (0.05 and 0.011 g), dry shoot-root weight (0.008 and 0.009 g), Chl a, Chl b, and carotenoid (5.4, 3.2 mg/g, and 4.3 μg/g), total soluble sugar (TSS) (26.44 mg/g), and total soluble protein (TSP) (21.99 mg/g) content considerably reduced in the plant tissues while combined impact of bacteria and ZnO NPs alleviates HM stress in contaminated water and improved seed germination (70%), root-shoot length (9.93 and 11.82 cm), fresh shoot-root weight (0.125 and 0.131 g), dry shoot-root weight (0.0532 and 0.042 g), Chl a, Chl b, and carotenoid (18.8, 13.9 mg/g, and 17.1 μg/g), TSS (57.651 mg/g), and TSP (47.990 mg/g) content. Lipid peroxidation induced by HM stress increased the amount of thiobarbituric acid reactive substances (TBRAS) (17.321 nM/mg) and hydrogen peroxide (H2O2) content (14.5 μM/g), stress markers such as glycine betaine (GB) (40.731 mg/g) and proline (Pro) (38.812 μmol/g) and antioxidant enzymes (SOD, POD, CAT, and APX) (180.87 U/mg, 450.677, 0.1066, and 0.631 μm/min/mg) under HM stress while the combined effect of ZnO NPs and bacteria reduced TBRAS (5.431 nM/mg), H2O2 content (2.25 μM/g), stress markers such as GB (24.731 mg/g) and Pro (18.811 μmol/g), and SOD, POD, CAT, and APX (187.53, 194.88, 0.061, and 0.271 μm/min/mg) contents. The present study suggested a potential role of combined impact of nanoparticles and bacteria in remediation of heavy metals from wastewater by improving plant growth.

Photocatalytic degradation activity of goji berry extract synthesized silver-loaded mesoporous zinc oxide (Ag@ZnO) nanocomposites under simulated solar light irradiation

Different approaches have been developed for the synthesis of various nanostructured materials with unique morphologies. This study demonstrated the photocatalytic and antimicrobial abilities of silver-loaded zinc oxide nanocomposites (Ag@ZnO NCs). Initially, ZnO with a unique mesoporous ellipsoidal morphology in the size range of 0.59 ± 0.11 × 0.33 ± 0.09 µm (length × width) was synthesized using aqueous precipitation in a mild hydrothermal condition (80 °C) with the aqueous fruit extract of goji berry (GB) (as an additive) and calcined in air at 200 °C/2 h and 250 °C/3 h. Powder X-ray diffraction (XRD) revealed the formation of a hexagonal phase of the wurtzite (WZ) structure. The average crystallite size of ZnO was 23.74 ± 4.9 nm as calculated using Debye–Scherrer’s equation. It also possesses higher thermal stability with the surface area, pore volume, and pore size of 11.77 m²/g, 0.027 cm³/g, and 9.52 nm, respectively. Furthermore, different mesoporous Ag@ZnO NCs loaded with face-centered cubic (fcc) silver nanoparticles (Ag NPs) in the range of 90–160 nm were synthesized by GB extract as a reducing and capping agent on the surface of ZnO after calcination in air. The immobilization of Ag NPs was confirmed by XRD, X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), FE-transmission electron microscopy (FE-TEM), and energy-dispersive X-ray spectroscopy (EDS). It was found that Ag_0.2@ZnO NC (0.2 wt% of Ag) showed excellent photocatalytic degradation of both methylene blue (MB) (cationic) and congo red (CR) (anionic) dyes under simulated solar irradiation. The photocatalytic degradation of 99.3 ± 0.35% MB and 98.5 ± 1.3% CR occurred in 90 and 55 min, respectively, at room temperature by Ag_0.2@ZnO NC. Besides, these NCs also showed broad-spectrum antibacterial activity against both Gram-positive and Gram-negative bacteria. The mechanistic concept of generating reactive oxygen species (ROS) by electron and hole charge (e‾/h⁺) carriers seems to be responsible for the photocatalytic degradation of commercial dyes and antibacterial activities by Ag@ZnO NCs. Thus, these silver-loaded mesoporous ellipsoidal ZnO NCs are promising candidates as photocatalysts for industrial/wastewater treatment as well as in antimicrobial therapeutics.

Sustainable microalgal biomass valorization to bioenergy: Key challenges and future perspectives

The global trend is shifting toward circular economy systems. It is a sustainable environmental approach that sustains economic growth from the use of resources while minimizing environmental impacts. The multiple industrial use of microalgal biomass has received great attention due to its high content of essential nutrients and elements. Nevertheless, low biomass productivity, unbalanced carbon to nitrogen (C/N) ratio, resistant cellular constituents, and the high cost of microalgal harvesting represent the major obstacles for valorization of algal biomass. In recent years, microalgae biomass has been a candidate as a potential feedstock for different bioenergy generation processes with simultaneous treating wastewater and CO₂ capture. An overview of the appealing features and needed advancements is urgently essential for microalgae-derived bioenergy generation. The present review provides a timely outlook and evaluation of biomethane production from microalgal biomass and related challenges. Moreover, the biogas recovery potential from microalgal biomass through different pretreatments and synergistic anaerobic co-digestion (AcoD) with other biowastes are evaluated. In addition, the removal of micropollutants and heavy metals by microalgal cells via adsorption and bioaccumulation in their biomass is discussed. Herein, a comprehensive review is presented about a successive high-throughput for anaerobic digestion (AD) of the microalgal biomass in order to achieve for sustainable energy source. Lastly, the valorization of the digestate from AD of microalgae for agricultural reuse is highlighted.

Biogenic Synthesis of Cu-Doped ZnO Photocatalyst for the Removal of Organic Dye

The Cu-doped ZnO photocatalysts were prepared with a green and coprecipitation approach by using water hyacinth (Eichhornia crassipes) aquatic plant extract. In the preparation process, different amount of copper precursors such as 1, 2, 3, 4, and 5% of molar ratio were added to zinc nitrate precursors and abbreviated as Cu-ZnO (1%), Cu-ZnO (2%), Cu-ZnO (3%), Cu-ZnO (4%), and Cu-ZnO (5%), respectively. The characterization of the obtained samples was carried out, and the removal of the methylene blue (MB) dye was examined. Out of all catalysts, Cu-ZnO (3%) had the best photocatalytic performance and 89% of the MB dye was degraded. However, the degradation performances of blank (without catalysts), ZnO, Cu-ZnO (1%), Cu-ZnO (2%), Cu-ZnO (4%), and Cu-ZnO (5%) catalysts were 6, 54, 69, 83, 80, and 73%, respectively. Therefore, the use of water hyacinth plant extract with the optimum amount of Cu added to ZnO during the preparation of the catalyst could have a promising application in the degradation of organic pollutants.

Green remediation potential of immobilized oxidoreductases to treat halo-organic pollutants persist in wastewater and soil matrices - A way forward

The alarming presence of hazardous halo-organic pollutants in wastewater and soils generated by industrial growth, pharmaceutical and agricultural activities is a major environmental concern that has drawn the attention of scientists. Unfortunately, the application of conventional technologies within hazardous materials remediation processes has radically failed due to their high cost and ineffectiveness. Consequently, the design of innovative and sustainable techniques to remove halo-organic contaminants from wastewater and soils is crucial. Altogether, these aspects have led to the search for safe and efficient alternatives for the treatment of contaminated matrices. In fact, over the last decades, the efficacy of immobilized oxidoreductases has been explored to achieve the removal of halo-organic pollutants from diverse tainted media. Several reports have indicated that these enzymatic constructs possess unique properties, such as high removal rates, improved stability, and excellent reusability, making them promising candidates for green remediation processes. Hence, in this current review, we present an insight of green remediation approaches based on the use of immobilized constructs of phenoloxidases (e.g., laccase and tyrosinase) and peroxidases (e.g., horseradish peroxidase, chloroperoxidase, and manganese peroxidase) for sustainable decontamination of wastewater and soil matrices from halo-organic pollutants, including 2,4-dichlorophenol, 4-chlorophenol, diclofenac, 2-chlorophenol, 2,4,6-trichlorophenol, among others.