Engineering of highly Brachychiton populneus shells@polyaniline bio-sorbent for efficient removal of pesticides from wastewater: Optimization using BBD-RSM approach

Topical drug formulation for enhanced permeation: A comparison of Bayesian optimisation and response surface methodology with an ibuprofen-loaded poloxamer 407-based formulations case study

Topical skin products aim to address aesthetic, protective, and/or therapeutic needs through interaction with the human epidermal system. Traditionally, formulation development relies on empirical knowledge and trial-and-error experiments. In this paper, we introduced the Bayesian optimisation method and compared it with the traditional response surface methodology (RSM) for topical drug formulation. The objective was to optimise the formulation composition of ibuprofen gel-like to achieve a maximum flux through in vitro permeation tests (IVPTs). As a model system, poloxamer 407, ethanol, and propylene glycol (PG) were selected as the key excipients, whose concentrations were optimised. Strat-M membrane, serving as a surrogate for human skin, and Franz cell diffusion were employed in IVPTs. Two sets of experiments were conducted under identical conditions for 30 h. Under the RSM approach, the optimised ibuprofen gel-like formulation was identified with a poloxamer 407: ethanol: PG ratio of 20:20:10, achieving a measured permeation flux of 11.28 ± 0.35 μg cm-2h-1. In comparison, Bayesian optimisation, after four iterations, yielded an optimised formulation with a ratio of 20.95:19.44:12.14, resulting in a permeation flux of 14.15 ± 0.77 μg cm-2h-1. These findings highlight the potential of Bayesian optimisation as an effective tool for improving topical drug formulations.

Eco-friendly engineering of micro composite-based hydroxyapatite bio crystal and polyaniline for high removal of OG dye from wastewater: Adsorption mechanism and RSM@BBD optimization

The presence of harmful substances such as dyes in water systems poses a direct threat to the quality of people's lives and other organisms living in the ecosystem. Orange G (OG) is considered a hazardous dye. The existing paper attempts to evaluate a low-cost adsorbent for the effective removal of OG dye. The developed adsorbent Polyaniline@Hydroxyapatite extracted from Cilus Gilberti fish Scale (PANI@FHAP) was elaborated through the application of the in situ chemical polymerization method to incorporate PANI on the surface of naturally extracted hydroxyapatite FHAP. The good synthesis of PANI@FHAP was evaluated through multiple techniques including X-ray diffraction (XRD), Scanning electron microscopy coupled with energy dispersive X-ray spectrometry (SEM/EDS), Fourier Transforms Infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA) coupled with thermal differential analysis (DTA) analysis. The results reveal a highly ordered disposition of PANI chains on FHAP, resulting in a well-coated FHAP in the PANI matrix. Furthermore, the presence of functional groups on the surface of PANI such as amine (-NH2) and imine (=NH) groups would facilitate the removal of OG dye from contaminated water. The adsorption of OG onto PANI@FHAP was conducted in batch mode and optimized through response surface methodology coupled with box-Behnken design (RSM/BBD) to investigate the effect of time, adsorbent dose, and initial concentration. The outcomes proved that OG adsorption follows a quadratic model (R2 = 0.989). The kinetic study revealed that the adsorption of OG fits the pseudo-second-order model. On the other hand, the isotherm study declared that the Freundlich model is best suited to the description of OG adsorption. For thermodynamic study, the adsorption of OG is spontaneous in nature and exothermic. Furthermore, the regeneration-reusability study indicates that PANI@FHAP could be regenerated and reused up to five successive cycles. Based on the FTIR spectrum of PANI@FHAP after OG adsorption, the mechanism governing OG adsorption is predominantly driven by π-π interaction, electrostatic interaction, and hydrogen bonding interactions. The obtained results suppose that PANI@FHAP adsorbent can be a competitive material in large-scale applications.

Phenolic compounds removal in table olive processing wastewater by column adsorption: conditions' optimization

The annual production of wastewater from the olive table industry poses a serious problem owing to its high organic matter load, which is highly concentrated in phenolic compounds (PCs) and inorganic materials. This research used adsorption to recover PCs from table olive wastewater (TOWW). Activated carbon was employed as a novel adsorbent. The activated carbon was obtained from olive pomace (OP) and activated using a chemical agent (ZnCl2). Fourier transform infrared spectroscopy analysis (FTIR), Brunauer-Emmett-Teller analysis (BET), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were applied to characterize the activated carbon sample. To optimize the biosorption conditions of PCs (adsorbent dose (A), temperature (B), and time (C)), a central composite design (CCD) model was used. An adsorption capacity was 1952.34 mg g-1 for optimal conditions with an activated carbon dose of 0.569 g L-1, a temperature of 39 °C, and a contact time of 239 min. The pseudo-second-order and Langmuir models as kinetic and isothermal mathematical models were proved to be more appropriate for the interpretation of the adsorption phenomenon of PCs. PC recovery was performed in fixed-bed reactors. The results of the adsorption of PCs from TOWW by activated carbon could be an effective process at a low cost.

Enhancing trimethoprim pollutant removal from wastewater using magnetic metal-organic framework encapsulated with poly (itaconic acid)-grafted crosslinked chitosan composite sponge: Optimization through Box-Behnken design and thermodynamics of adsorption parameters

Trimethoprim (TMP), an antibiotic contaminant, can be effectively removed from water by using the innovative magnetic metal-organic framework (MOF) composite sponge Fe3O4@Rh-MOF@PIC, which is shown in this study. The composite is made up of magnetite (Fe3O4) nanoparticles and a rhodium MOF embedded in a poly(itaconic acid) grafted chitosan matrix. The structure and characteristics of the synthesized material were confirmed by thorough characterization employing SEM, FTIR, XPS, XRD, and BET techniques. Notably, the composite shows a high magnetic saturation of 64 emu g-1, which makes magnetic separation easier, according to vibrating sample magnetometry. Moreover, BET analysis revealed that the Fe3O4@Rh-MOF@PIC sponge had an incredibly high surface area of 1236.48 m2/g. Its outstanding efficacy was confirmed by batch adsorption tests, which produced a maximum adsorption capacity of 391.9 mg/g for the elimination of TMP. Due to its high porosity, magnetic characteristics, and superior trimethoprim uptake, this magnetic MOF composite sponge is a promising adsorbent for effective removal of antibiotics from contaminated water sources. An adsorption energy of 24.5 kJ/mol was found by batch investigations on the Fe3O4@Rh-MOF@PIC composite sponge for trimethoprim (TMP) adsorption. The fact that this value was up 8 kJ/mol suggests that the main mechanism controlling TMP absorption onto the sponge adsorbent is chemisorption. Chemisorption requires creating strong chemical interactions between adsorbate and adsorbent surface groups, unlike weaker physisorption. The magnetic composite sponge exhibited strong removal capabilities and high adsorption capacities for the antibiotic pollutant. The Fe3O4@Rh-MOF@PIC composite sponge also showed magnetism, which allowed for easy magnetic separation after adsorption. Over the course of 6 cycles, it showed outstanding reusability, and XRD confirmed that its composition was stable. The high surface area MOF's pore filling, hydrogen bonding, π-π stacking, and electrostatic interactions were the main trimethoprim adsorption mechanisms. This magnetic composite is feasible and effective for removing antibiotics from water because of its separability, reusability, and synergistic adsorption mechanisms via electrostatics, H-bonding, and π-interactions. The adsorption results were optimized using Box Behnken-design (BBD).

Eco-friendly synthesis of clay-chitosan composite for efficient removal of alizarin red S dye from wastewater: A comprehensive experimental and theoretical investigation

Alizarin Red S (ARS) is commonly utilized for dyeing in textile industry. The dye represents a refractory pollutant in the aquatic environment unless properly treated. To tackle this pollutant, the applicability of chitosan-clay composite (3C) for the ARS removal from textile wastewater was studied. Characterization studies were conducted on the synthesized adsorbent using Fourier transformation infrared (FT-IR), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) techniques. Optimized parameters such as adsorbent's dosage, pH, reaction time, and initial concentrations were tested in a batch system. Additionally, density functional theory (DFT) was calculated to understand the adsorption mechanism and the role of benzene rings and oxygen atoms in the ARS as electron donors. At the same initial concentration of 30 mg/L and optimized conditions of 50 mg of dose, pH 2, and 10 min of reaction time, about 86% of ARS removal was achieved using the composite. The pseudo-second-order kinetic was applicable to model a reasonable fitness of the adsorption reaction, while the Temkin model was representative to simulate the reaction with a maximum adsorption capacity of 44.39 mg/g. This result was higher than magnetic chitosan (40.12 mg/g), or pure chitosan (42.48 mg/g). With ΔH = 27.22 kJ/mol and ΔG<0, the data implied the endothermic and spontaneous nature of the adsorption process. Overall, this implies that the clay-chitosan composite is promising to remove target dye from contaminated wastewater.

Response surface optimization of sludge dewatering process: synergistic enhancement by ultrasonic, chitosan and sludge-based biochar

Due to the colloidal stability, the high compressibility and the high hydration of extracellular polymeric substances (EPS), it is difficult to efficiently dehydrate sludge. In order to enhance sludge dewatering, the process of ultrasonic (US) cracking, chitosan (CTS) re-flocculation and sludge-based biochar (SBB) skeleton adsorption of water-holding substances to regulate sludge dewaterability was proposed. Based on the response surface method, the prediction model of the specific resistance to filtration (SRF) and sludge cake moisture content (MC) was established. The US cracking time and the dosage of CTS and SBB were optimized. The results showed that the optimal parameters of the three were 5.08 s, 10.1 mg/g dry solids (DS) and 0.477 g/g DS, respectively. Meantime, the SRF and MC were 5.4125 × 1011 m/kg and 76.8123%, which significantly improved the sludge dewaterability. According to the variance analysis, it is found that the fitting degree of SRF and MC model is good, which also confirms that there is significant interaction and synergy between US, CTS and SBB, and the contribution of CTS and SBB is greater. Moreover, the process significantly improves the sludge's calorific value and makes its combustion more durable.

In-situ registration subtraction image segmentation algorithm for spatiotemporal visualization of copper adsorption onto corn stalk-derived pellet biochar by micro-computed tomography

The non-homogeneous structure and high-density ash composition of biochar matrix pose significant challenges in characterizing the dynamic changes of heavy metal adsorption onto biochar with micro-computed tomography (Micro-CT). A novel in-situ registration subtraction image segmentation method (IRS) was developed to enhance micro-CT characterization accuracy. The kinetics of Cu(II) adsorption onto pellet biochar derived from corn stalks were tested. Respectively, the IRS and traditional K-means algorithms were used for image segmentation to the in-situ three-dimensional (3D) visual characterization of the Cu(II) adsorption onto biochar. The results indicated that the IRS algorithm reduced interference from high-density biochar composition, and thus achieved more precise results (R2 = 0.95) than that of K-means (R2 = 0.72). The visualized dynamic migration of Cu(II) from surface adsorption to intraparticle diffusion reflexed the complex mechanism of heavy metal adsorption. The developed Micro-CT method with high generalizability has great potential for studying the process and mechanism of biochar heavy metal adsorption.

Antifungal drugs in the aquatic environment: A review on sources, occurrence, toxicity, health effects, removal strategies and future challenges

Fungal infections pose a significant global health burden, resulting in millions of severe cases and deaths annually. The escalating demand for effective antifungal treatments has led to a rise in the wholesale distribution of antifungal drugs, which consequently has led to their release into the environment, posing a threat to ecosystems and human health. This article aims to provide a comprehensive review of the presence and distribution of antifungal drugs in the environment, evaluate their potential ecological and health risks, and assess current methods for their removal. Reviewed studies from 2010 to 2023 period have revealed the widespread occurrence of 19 various antifungals in natural waters and other matrices at alarmingly high concentrations. Due to the inefficiency of conventional water treatment in removing these compounds, advanced oxidation processes, membrane filtration, and adsorption techniques have been developed as promising decontamination methods.In conclusion, this review emphasizes the urgent need for a comprehensive understanding of the presence, fate, and removal of antifungal drugs in the environment. By addressing the current knowledge gaps and exploring future prospects, this study contributes to the development of strategies for mitigating the environmental impact of antifungal drugs and protecting ecosystems and human health.

Revealing the interface chemistry of polyaniline grafted biomass via statistical modeling of multi-component dye systems: optimization, kinetics, thermodynamics, and adsorption mechanism

The growing need to examine the adsorption capabilities of innovative materials in real-world water samples has encouraged a shift from single to multicomponent adsorption systems. In this study, a novel composite, PANI-g-SM was synthesized by covalently grafting a lignocellulosic biomass, Saccharum munja (SM) with polyaniline (PANI). The as-synthesized composite was investigated for the simultaneous adsorption of cationic (Methylene Blue (MB); Crystal Violet (CV)) and anionic dyes (Reactive Red 35 (RR); Fast Green FCF (FG)) from four single components and two binary systems, MB + RR and CV + FG. Further, the effect and interaction of pH (2-11), dosage (0.01-0.04 g/10 mL), and initial concentration (0.0313 to 0.1563 mmol/L) on the elimination of dyes by PANI-g-SM were studied through a novel design of Box-Behnken of Response Surface Methodology (RSM) technique which was found to be highly useful for revealing the chemistry of interfaces in multi-component systems. The extended Langmuir model for the binary system indicated the presence of synergism, as result the maximum monolayer adsorption capacity increased by 44.44%, 645.83%, 67.88%, and 441.07% for MB, RR, CV, and FG dye, respectively. Further, the adsorption process mainly followed a pseudo-second-order kinetic model, and the thermodynamic studies revealed the exothermic nature of adsorption for RR and FG dye while endothermic for MB and CV dye, respectively with Δ G varying from - 1.68 to - 6.12 kJ/mol indicating the spontaneity of the process. Importantly, the efficacy of the composite was evaluated for the treatment of textile industry effluent highlighting its potential as an adsorbent for wastewater treatment.

Cellulose beads supported CoFe2O4: A novel heterogeneous catalyst for efficient rhodamine B degradation via advanced oxidation processes

In this study, a novel mechanical process was used to produce cellulose beads (CB). These beads were then doped with cobalt ferrite nanoparticles (CoFe2O4 NPs) to serve as catalysts for the degradation of rhodamine B (RhB) through peroxymonosulfate (PMS) activation. The physical and chemical properties of CoFe2O4 and CoFe2O4@CB catalysts were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) combined with energy dispersive X-ray spectrometer (EDX), scanning transmission electron microscopy (STEM) techniques, and thermogravimetric analysis (TGA). To optimize RhB degradation efficiency, Response Surface Methodology (RSM) was employed, utilizing the Box-Behnken design (BBD). Under the optimized conditions of a catalyst dosage of 0.40 g/L, PMS dosage of 0.98 mM, RhB concentration of 40 mg/L, pH of 5.27, and reaction time of 60 min, a remarkable degradation efficiency of 98.51 % was achieved at a temperature of 25 °C. In quenching experiments, 1O2, SO4•-, and HO• species are produced in the CoFe2O4@CB/PMS system, with 1O2, and SO4•- species dominating RhB degradation. Remarkably, the new CoFe2O4@CB catalyst has demonstrated exceptional stability and reusability, validated by recycling tests (up to 78 % of RhB degradation efficiency after a 5-cycle experiment) and subsequent characterizations (FTIR, SEM, and EDX) emphasizing unchanged bands, uniform distribution, and consistent composition after reuse cycles. These results demonstrate the effectiveness of mechanically produced CoFe2O4@CB catalysts for advanced oxidation processes (AOPs), with promising applications in wastewater treatment.

Removal of emergent pollutants: A review on recent updates and future perspectives on polysaccharide-based composites vis-à-vis traditional adsorbents

There is a growing incidence in the presence of emergent pollutants like the pesticides and pharmaceuticals in water bodies. The matter of environmental concern is their synthetic and persistent nature which has resulted in induced toxicity/damaging effect to the vital functioning of the different organs in the aquatic community. Traditional adsorbents have exhibited limitations like low stability and minimum reuse ability. Composites of such adsorbents with polysaccharides have demonstrated distinct features like improved surface area, porosity, adsorptivity; improved reusability and structural integrity; improved mechanical strength, thermal stability when applied for the removal of the emergent pollutants. The biocompatibility and biodegradability of such fabricated composites is established; thereby making the water treatment process cost effective, sustainable and environmentally friendly. The present review has dealt with an in-depth, up-dated literature compilation of traditional as well as polysaccharide based composite adsorbents and addressed their performance evaluation for the removal of pharmaceuticals and pesticides from wastewater. A comparative study has revealed the merits of polysaccharide based composites and discussions have been made with a focus on future research directions in the related area.

Health effects of herbicides and its current removal strategies

The continually expanding global population has necessitated increased food supply production. Thus, agricultural intensification has been required to keep up with food supply demand, resulting in a sharp rise in pesticide use. The pesticide aids in the prevention of potential losses caused by pests, plant pathogens, and weeds, but excessive use over time has accumulated its occurrence in the environment and subsequently rendered it one of the emerging contaminants of concern. This review highlights the sources and classification of herbicides and their fate in the environment, with a special focus on the effects on human health and methods to remove herbicides. The human health impacts discussion was in relation to toxic effects, cell disruption, carcinogenic impacts, negative fertility effects, and neurological impacts. The removal treatments described herein include physicochemical, biological, and chemical treatment approaches, and advanced oxidation processes (AOPs). Also, alternative, green, and sustainable treatment options were discussed to shed insight into effective treatment technologies for herbicides. To conclude, this review serves as a stepping stone to a better environment with herbicides.

Synergistic effect of arsenic removal from petroleum condensate via liquid-liquid extraction: Thermodynamics, kinetics, DFT and McCabe-Thiele method

This work presents the purification of petroleum condensate by removing arsenic ions via liquid-liquid extraction (LLE). Influence of pure and synergistic extractants is investigated. In terms of the practicability, following parameters are examined: the type of extractant, operating time, and temperature. Response surface methodology is used to design parameters such as organic-aqueous ratio and extractant concentration. Under optimal conditions; a mixture of 1 mol/L HCl and 0.02 mol/L thiourea with an organic/aqueous ratio of 1:4 at 323.15 K for 60 min, the extraction of arsenic reached 78.2 %. Further, batch simulation via two-stage counter-current extraction, and estimation by McCabe-Thiele diagram proved to be enhanced arsenic extraction to 95.3 %. Analysis by FTIR show that arsenic ions in petroleum condensate are formed as triphenylarsine compound ((C6H5)3As). The process of arsenic removal proved to be zero-order endothermic, irreversible and spontaneous reaction. The results obtained from the density functional theory (DFT) confirm that arsenic ions react with the synergistic extractant: effectively forming a covalent bond (As-S).

Plants, animals, and fisheries waste-mediated bioremediation of contaminants of environmental and emerging concern (CEECs)-a circular bioresource utilization approach

The release of contaminants of environmental concern including heavy metals and metalloids, and contaminants of emerging concern including organic micropollutants from processing industries, pharmaceuticals, personal care, and anthropogenic sources, is a growing threat worldwide. Mitigating inorganic and organic contaminants, which can be coined as contaminants of environmental and emerging concern (CEECs), is a big challenge as traditional physicochemical processes are not economically viable for managing mixed contaminants of low concentrations. As a result, low-cost materials must be designed to provide high CEEC removal efficiency. One of the environmentally viable and energy-efficient approaches is biosorption, which involves using biomass or biopolymers isolated from plants or animals to decontaminate heavy metals in contaminated environments using inherent biological mechanisms. Among chemical constituents in plant biomass, cellulose, lignin, hemicellulose, proteins, polysaccharides, phenolic compounds, and animal biomass include polysaccharides and other compounds to bind heavy metals covalently and non-covalently. These functional groups include carboxyl, hydroxyl, carbonyl, amide, amine, and sulfhydryl. Cation-exchange capacities of these bioadsorbents can be improved by applying chemical modifications. The relevance of chemical constituents and bioactives in biosorbents derived from agricultural production such as food and fodder crops, bioenergy and cash crops, fruit and vegetable crops, medicinal and aromatic plants, plantation trees, aquatic and terrestrial weeds, and animal production such as dairy, goatery, poultry, duckery, and fisheries is highlighted in this comprehensive review for sequestering and bioremediation of CEECs, including as many as ten different heavy metals and metalloids co-contaminated with other organic micropollutants in circular bioresource utilization and one-health concepts.

High thiabendazole fungicide uptake using Cellana tramoserica shells modified by copper: characterization, adsorption mechanism, and optimization using CCD-RSM approach

In this paper, Cellana tramoserica (CT) shells were modified by copper and used as an adsorbent to remove thiabendazole (TBZ) from aqueous media. The removal efficiency of TBZ onto CT shells and modified Cellana tramoserica (CT-Cu) shells was investigated by considering the following parameters: initial pesticide concentration, solution pH, agitation time, temperature, and adsorbent mass. The experimental results show that the pseudo-first-order and Langmuir models well describe the adsorption process. The maximum adsorption amount for CT and CT-Cu is 319.68 mg/g and 376.12 mg/g, respectively. CT-Cu showed higher TBZ removal efficiency than CT, explained by the ligand exchange between the water and the pesticide molecules in the metal coordination sphere. Response surface methodology combined with central composite design (RSM-CCD) was used to optimize the adsorption conditions. Optimized values were obtained at 5 for pH, 50 ppm, 120 min, and 20 mg of CT-Cu adsorbent. Under these optimal conditions, 91% of TBZ was removed by adsorption onto CT-Cu. Graphical abstract.

Unravelling the Methylene Blue Adsorption Mechanism on Doped and Nondoped Polyaniline: A Combined Molecular Modeling and Experimental Investigation

A multiscale investigation including computational chemistry calculations and experimental studies was performed to elucidate and understand the methylene blue (MB) adsorption on polyaniline (PANI) from an aqueous solution. Static DFT and DFT-based ab initio molecular dynamics were used to characterize the intermolecular interactions of this dye molecule with nondoped and doped PANI. Experimental adsorption studies at different operating conditions were performed to complement the mechanism analysis of this adsorption system. Infrared spectroscopy studies and ab initio calculations showed the important role of π-π stacking and van der Waals interactions for the dye adsorption on PANI. Experimental results of MB adsorption on the PANI surface indicated that alkaline conditions were more favorable than acidic conditions where the MB adsorption capacity ranged from 9.91 mg/g at pH 1.8 to 23.16 mg/g at pH 10.9. Equilibrium adsorption studies with nondoped PANI revealed a fast removal of the dye molecules where the equilibrium adsorption was reached after 45 minutes. The kinetic parameters were calculated with the pseudo-second and pseudo-first order models, while the adsorption mechanism was analyzed using the intraparticle diffusion, Boyd, and Elovich models. Dye adsorption equilibrium was studied at pH 8 and 30 °C where Temkin, Freundlich, Langmuir, and Dubinin-Radushkevich (D-R) isotherm models as well as a statistical physics monolayer model were employed in data analysis. The saturation dye adsorption capacity was 40.2 mg/g where an inclined adsorption orientation of dye molecules on the PANI surface could be expected with an adsorption energy of 14.0 kJ/mol. This interaction energy clearly indicated that only physical interactions were involved in the MB dye adsorption mechanism, which was also confirmed by the calculations with the D-R isotherm model. These theoretical and experimental results are important to understand the dye adsorption properties of conductive polymers and to consolidate their application in the synthesis of new adsorbents and composites for water treatment.

Experimental Insights into Mesoporous Polyaniline-Based Nanocomposites for Anionic and Cationic Dye Removal

This work presents the preparation of inorganic-organic hybrid nanocomposites, namely three-dimensional polyaniline (Pani)/activated silica gel (ASG) (3D Pani@ASG), their characterization, and in removing application as a potential adsorbent for cationic brilliant green (BG), crystal violet (CV), and anionic Congo red (CR), and methyl orange (MO) dyes. Pani@ASG nanocomposites have been prepared by the in situ polymerization method and characterized using various techniques such as Fourier transform infrared (FTIR), X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) with selected area electron diffraction, thermogravimetric analysis with derivative thermogravimetry, zeta potential analyses, and Brunauer-Emmett-Teller (BET). The scanning electron microscopy (SEM) study confirms the average particle size of the Pani@ASG nanocomposite is in the range of 5 nm. FESEM, TEM, FTIR, and XRD analysis proved the successful decoration of ASG over Pani. The BET result of Pani@ASG shows a mesoporous nature with a pore diameter of less than 3 nm and a surface area of 423.90 m² g^-1. Both SEM and TEM analyses show the proportional distribution of ASG over Pani's surface. The adsorption trend of BG and MO on the studied materials at pH 7 was found as follows: Pani@ASG > Pani > ASG. The highest sorption capacities of MO and BG on Pani@ASG were 161.29 and 136.98 mg/g (T = 298.15 K, and Pani@ASG dose: 0.04 g for MO and 0.06 g for BG), which were greater compared with bare Pani and bare ASG, respectively. The interaction mechanism behind the adsorption of BG and MO dyes onto the Pani@ASG nanocomposite includes electrostatic interaction, π-π interaction, and hydrogen bonding. The mechanistic pathway and the interactions between the targeted dyes and Pani@ASG were further studied using adsorption isotherm, adsorption kinetics, and thermodynamics.

Insight into the adsorption properties of a β-cyclodextrin/phillipsite organophilic composite for effective removal of toxic organophosphorus pesticides: kinetic and advanced equilibrium studies

β-Cyclodextrin/phillipsite was used in the uptake of three pesticides from water achieving Qsat values of 360 mg g−1 (MPn), 321.6 mg g−1 (OM), and 434.5 mg g−1 (AC). The uptake energies suggested endothermic physisorption reactions.