Photoluminescence and gas sensing study of nanostructured pure and Sn doped ZnO

Boosted charge separation via Ce2S3 over dual Z-scheme ZnO-Ce2S3-MnO2 core double-shell nanocomposite for the degradation of diverse dye pollutants

Herein, core double-shell direct dual Z-scheme ZnO-Ce2S3-MnO2 nanocomposite was synthesized via a hydrothermal route along with pure ZnO, Ce2S3, MnO2, and characterized by numerous characterization tools for application in synthetic dyes degradation. The XRD, Raman, and FTIR analyses have confirmed the nanocomposite formation. TEM images exhibited the core double-shell morphology with an average particle diameter of 81 nm and stacking of ZnO, Ce2S3, and MnO2. EDX confirmed the existence of desired elements in the grown composition. The varied oxidation states, presence of defects, and fast charge transfer were also revealed from XPS, PL, and EIS. The ZnO-Ce2S3-MnO2 nanocomposite has an optical energy bandgap of 2.84 eV, capable of decomposing harmful dyes with excellent efficiency, 99.81% MB, 97.62% MO, 88.5% MR, and 58.9% EY in 40 min sunlight exposure. The effect of several operating parameters is also observed and obtained results showed the optimal catalyst dose was 20 mg, pH of 8, and dye concentration of 10 ppm. The scavenger's experiment suggests that •O2- and •OH are the main active radicals in the photodegradation reaction which is also evident in the dual Z-scheme formation. The MnO2 and ZnO layers covered the Ce2S3 (core) and dual Z-scheme formation allows rapid kinetics of redox reaction and provides plenteous channels for transfer of photo-generated charge carriers during photocatalysis. Thus, core double-shell direct dual Z-scheme photocatalysts having inorganic components could be an excellent choice for photocatalysis at the industrial level, particularly for water purification.

Dual effect to improve the electrical properties of SZO films grown by nitrogen pneumatic spray pyrolysis

The principal aim of this study is to reduce considerably, via Sn doping, the resistivity of ZnO thin films prepared by simple, flexible, and cost-effective nitrogen pneumatic spray pyrolysis (NPSP) method on glass substrates at a temperature of 400°C. Different Sn content was tested (Sn/Zn = 0, 1, 3, 5 wt%) in an attempt to reduce the concentration of excessive oxygen atoms and create more free electrons. The microstructural, optical, morphological, and electrical properties of the films have been studied. The x-ray diffraction analysis demonstrated that tin-doped SZO films exhibited polycrystalline nature with a preferential orientation along (002) plane with the appearance of a new orientation (101) with the increase of Sn concentration leading then to bidirectional growth. The deposited SZO films showed an average optical transmittance of about 80% in the UV-visible region (200-800 nm) with optical band gap values at around 3.27 eV. Photoluminescence emissions of SZO samples presented three main peaks: near band edge emission, violet emission, and the blue-green emission. The surface morphology of the films obtained by scanning electron microscope (SEM) exhibited the change in morphology with increasing the Sn content. A minimum electrical resistivity value of about 17·10-3 Ω·cm was obtained for 3% SZO films. SZO films prepared by the NPSP method can be used as transparent window layer and electrodes in solar cells. RESEARCH HIGHLIGHTS: Highly oriented, conducting, and transparent Sn-doped ZnO films are successfully synthesized. The film growth orientation changed from mono-directional (002) axis to bi-directional (002) and (101) axis according to Sn doping. Ultraviolet and green emissions are noted by photoluminescence investigation. A minimum resistivity is observed for 3 wt% SZO film. The dual positive effect of the carrier gas used (N2) and Sn doping is confirmed.

Optimization of Pulsed Laser Ablation and Radio-Frequency Sputtering Tandem System for Synthesis of 2D/3D Al2O3-ZnO Nanostructures: A Hybrid Approach to Synthesis of Nanostructures for Gas Sensing Applications

In this paper, a unique hybrid approach to design and synthesize 2D/3D Al₂O₃-ZnO nanostructures by simultaneous deposition is presented. Pulsed laser deposition (PLD) and RF magnetron sputtering (RFMS) methods are redeveloped into a single tandem system to create a mixed-species plasma to grow ZnO nanostructures for gas sensing applications. In this set-up, the parameters of PLD have been optimized and explored with RFMS parameters to design 2D/3D Al₂O₃-ZnO nanostructures, including nanoneedles/nanospikes, nanowalls, and nanorods, among others. The RF power of magnetron system with Al₂O₃ target is explored from 10 to 50 W, while the ZnO-loaded PLD's laser fluence and background gases are optimized to simultaneously grow ZnO and Al₂O₃-ZnO nanostructures. The nanostructures are either grown via 2-step template approach, or by direct growth on Si (111) and MgO<0001> substrates. In this approach, a thin ZnO template/film was initially grown on the substrate by PLD at ~300 °C under ~10 milliTorr (1.3 Pa) O₂ background pressure, followed by growth of either ZnO or Al₂O₃-ZnO, using PLD and RFMS simultaneously under 0.1-0.5 Torr (13-67 Pa), and Ar or Ar/O₂ background in the substrate temperate range of 550-700 °C. Growth mechanisms are then proposed to explain the formation of Al₂O₃-ZnO nanostructures. The optimized parameters from PLD-RFMS are then used to grow nanostructures on Au-patterned Al₂O₃-based gas sensor to test its response to CO gas from 200 to 400 °C, and a good response is observed at ~350 °C. The grown ZnO and Al₂O₃-ZnO nanostructures are quite exceptional and remarkable and have potential applications in optoelectronics, such in bio/gas sensors.

Sisal-like Sn2+ doped ZnO hierarchical structures: synthesis, growth mechanism, and their application in photocatalysis

Sisal-like Sn doped ZnO hierarchical structures were prepared by the hydrothermal method without employing templates or matrices. The architectures show enhanced light absorption, high photocatalytic properties, good stability and reusability.

Anticandidal and In vitro Anti-Proliferative Activity of Sonochemically synthesized Indium Tin Oxide Nanoparticles

The present work demonstrates the synthesis, characterization and biological activities of different concentrations of tin doped indium oxide nanoparticles (Sn doped In2O3 NPs), i.e., (Sn/In = 5%, 10% and 15%). We have synthesized different size (38.11 nm, 18.46 nm and 10.21 nm) of Sn doped In2O3 NPs. by using an ultra-sonication process. The Sn doped In2O3 NPs were characterized by by x-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) which confirmed the successful doping of tin (Sn) with Indium oxide (In2O3). Anticandidal activity was performed by standard agar dilution method using Candida albicans for the study. The minimum inhibitory/fungicidal concentration (MIC/MFC) values recorded were, 8 & >8 mg/ml for pure In2O3 NPs, 4 & 8 mg/ml for 5%, 2 & 8 mg/ml for 10%, whereas 1 & >4 mg/ml for 15% Sn doped In2O3 NPs, respectively. The topographical alteration caused by Sn doped In2O3 NPs on Candida cells, was clearly observed by SEM examination. A significant enhancement in anticandidal activity was seen, when Candida cells were exposed to (Sn/In = 5%, 10% and 15%). Moreover, we have also evaluated the impact of Sn-In2O3 NPs on human colorectal carcinoma cells (HCT-116). The results demonstrated that Sn-In2O3 NPs (Sn/In = 5%, 10% and 15%), caused dose dependent decrease in the cancer cell viability as the low dosage (2.0 mg/mL) showed 62.11% cell viability, while 4.0, 8.0, 16.0, 32.0 mg/mL dosages showed 20.45%, 18.25%, 16.58%, and 15.58% cell viability. In addition, the treatment of Sn-In2O3 NPs also showed significant cellular and anatomical changes in cancer cells as examined by microscopes. We have also examined the impact of Sn-In2O3 NPs (5%, 10%, 15%) on normal cells (HEK-293) and the results demonstrate that Sn-In2O3 NPs did not reduce the cell viability of normal cells.

Preparation and Ethanol Sensing Properties of ZnO Nanoparticles via a Novel Sol-Gel Method

ZnO nanoparticles were prepared using a novel sol-gel method. Chemical reactions were carried out between zinc acetate and methanol under ambient conditions using monoethanol amine (MEA) as surfactant and subsequent heating at . The powders were calcined, pressed into pellets, and presintered. The properties of the product were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FTIR) spectra. For gas sensing experiment, ethanol was used as testing gas. The gas sensing results showed that the maximum value for detecting of 1000 ppm ethanol vapor was 25 at an operating temperature of .

Laser spectroscopy for atmospheric and environmental sensing

Lasers and laser spectroscopic techniques have been extensively used in several applications since their advent, and the subject has been reviewed extensively in the last several decades. This review is focused on three areas of laser spectroscopic applications in atmospheric and environmental sensing; namely laser-induced fluorescence (LIF), cavity ring-down spectroscopy (CRDS), and photoluminescence (PL) techniques used in the detection of solids, liquids, aerosols, trace gases, and volatile organic compounds (VOCs).