Crosslinked collagen–gelatin–hyaluronic acid biomimetic film for cornea tissue engineering applications

Corneal first aid lens: Collagen-based hydrogels loading aFGF as contact lens for treating corneal injuries

Severe corneal injuries can cause visual impairment even blindness. Surgically stitching or implanting biomaterials have been developed, but their implementation requires professional surgeons, failing to address the immediate need of medical treatment. The pressing challenge lies in developing multifunctional biomaterials that enable self-management of corneal injuries. This study introduces collagen-based hydrogels that can be used as contact lenses, incorporating macromolecular collagen into common polymer materials via a dual-step orthogonal cross-linking process. This method ensures superior optical and mechanical performance while preserving the bioactivity and structural stability of the incorporated materials. Specialized contact lens facilitates the controlled release of labile protein therapeutics such as acidic fibroblast growth factor (aFGF), eliminating the need for stabilizers like heparin. This capability allows the lens to deliver a wide range of labile proteins, thus expanding its therapeutic use across various ophthalmic and potentially other medical conditions. The lens's anti-inflammatory and anti-fibrotic properties effectively treat corneal alkali burn. Termed 'corneal first-aids lens', it can provide postoperative clinical care and serve as a viable and safe therapeutic alternative for patients with limited medical access.

SMILE-Derived Corneal Stromal Lenticule: Experimental Study as a Corneal Repair Material and Drug Carrier

PURPOSE

A detailed study of the physicochemical properties of SMILE-derived lenticules and evaluation of their drug delivery after loading with silver nanoparticles (AgNPs).

METHODS

The lenticules were decellularized and modified with crosslinking concentrations of 0.01 (0.01E/L), 0.05 (0.05E/L), and 0.25 (0.25E/L) mmol N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) per mg lenticule at 5:1 carbodiimide/N-hydroxysuccinimide (EDC/NHS) ratios. The degree of swelling, light transmittance, biomechanical properties, and stability of the non-crosslinked decellularized lenticules (DLs), 0.01E/L, 0.05E/L, and 0.25E/L were measured and characterized using Fourier transform infrared spectroscopy and transmission electron microscopy with non-crosslinked non-decellularized lenticules as controls. DLs, 0.01E/L, 0.05E/L, and 0.25E/L were soaked in AgNPs for 24 hours, and the concentration of the drug released was measured.

RESULTS

There was no significant difference in the degree of swelling between the groups (P > 0.05). The light transmittance of the lenticules did not change after decellularization and crosslinking and decreased after loading with AgNPs. Non-decellularized lenticules biodegraded within 108 to 120 hours, and the other groups biodegraded within 96 to 108 hours in vitro. The 0.01E/L had the highest tensile strength. The absorption peak intensity ratio of the amide I band and the amide II band decreased, and the arrangement of collagen fibers was more compact in crosslinked decellularized lenticules. The 0.01E/L had the highest cumulative drug release (3.4 ± 0.91 μg).

CONCLUSIONS

Crosslinking decellularization improved the biomechanical properties and resistance to water absorption of lenticules, increased covalent bonds between collagen fibers, and improved drug delivery. Crosslinked decellularized lenticules can be used as a new corneal patch material and drug delivery carrier for drug AgNPs.

Silk fibroin/vitreous humor hydrogel scaffold modified by a carbodiimide crosslinker for wound healing

Natural-derived biomaterials can be used as substrates for the growth, proliferation, and differentiation of cells. In this study, bovine vitreous humor as a biological material was cross-linked to silk fibroin with different concentration ratios to design a suitable substrate for corneal tissue regeneration. The cross-linked samples were evaluated with different analyses such as structural, physical (optical, swelling, and degradation), mechanical, and biological (viability, cell adhesion) assays. The results showed that all samples had excellent transparency, especially those with higher silk fibroin content. Increasing the ratio of vitreous humor to silk fibroin decreased mechanical strength and increased swelling and degradation, respectively. There was no significant difference in the toxicity of the samples, and with the increase in vitreous humor ratio, adhesion and cell proliferation increased. Generally, silk fibroin with vitreous humor can provide desirable characteristics as a transparent film for corneal wound healing.

Current Therapeutic Strategies of Intervertebral Disc Regenerative Medicine

Intervertebral disc degeneration (IDD) is one of the most frequent causes of low back pain. No treatment is currently available to delay the progression of IDD. Conservative treatment or surgical interventions is only used to target the symptoms of IDD rather than treat the underlying cause. Currently, numerous potential therapeutic strategies are available, including molecular therapy, gene therapy, and cell therapy. However, the hostile environment of degenerated discs is a major problem that has hindered the clinical applicability of such approaches. In this regard, the design of drugs using alternative delivery systems (macro-, micro-, and nano-sized particles) may resolve this problem. These can protect and deliver biomolecules along with helping to improve the therapeutic effect of drugs via concentrating, protecting, and prolonging their presence in the degenerated disc. This review summarizes the research progress of diagnosis and the current options for treating IDD.

Photocurable and Temperature-Sensitive Bioadhesive Hydrogels for Sutureless Sealing of Full-Thickness Corneal Wounds

Penetrating corneal wounds can cause severe vision impairment and require prompt intervention to restore globe integrity and minimize the risk of infection. Tissue adhesives have emerged as a promising alternative to suturing for mitigating postoperative complications. However, conventional water-soluble adhesives suffer formidable challenges in sealing penetrating corneal wounds due to dilution or loss in a moist environment. Inspired by the robust adhesion of mussels in aquatic conditions, an injectable photocurable bioadhesive hydrogel (referred to as F20HD5) composed of polyether F127 diacrylate and dopamine-modified hyaluronic acid methacrylate is developed for sutureless closure of corneal full-thickness wounds. F20HD5 exhibits high transparency, wound-sealing ability, proper viscosity, biodegradability, and excellent biocompatibility. It allows in situ cross-linking via visible light, thereby providing sufficient mechanical strength and adhesiveness. In vivo, the adhesive hydrogel effectively closed penetrating linear corneal incisions and corneal injuries with minimal tissue loss in rabbits. During the 56-day follow-up, the hydrogel facilitates the repair of the injured corneas, resulting in more symmetrical curvatures and less scarring in distinction to the untreated control. Thus, bioinspired hydrogel holds promise as an effective adhesive for sealing full-thickness corneal wounds.

Introducing Dynamicity: Engineering Stress Relaxation Into Hydrogels Via Thiol-Ene Modified Alginate for Mechanobiological in vitro Modeling of the Cornea

Developing biomaterials for corneal repair and regeneration is crucial for maintaining clear vision. The cornea, a specialized tissue, relies on corneal keratocytes, that respond to their mechanical environment. Altering stiffness affects keratocyte behavior, but static stiffness alone cannot capture the dynamic properties of in vivo tissue. This study proposes that the cornea exhibits time-dependent mechanical properties, similar to other tissues, and aims to replicate these properties in potential therapeutic matrices. First, the cornea's stress relaxation properties are investigated using nanoindentation, revealing 15% relaxation within 10 seconds. Hydrogel dynamicity is then modulated using a specially formulated alginate-PEG and alginate-norbornene mixture. The tuning of the hydrogel's dynamicity is achieved through a photoinitiated norbornene-norbornene dimerization reaction, resulting in relaxation times ranging from 30 seconds to 10 minutes. Human primary corneal keratocytes are cultured on these hydrogels, demonstrating reduced αSMA (alpha smooth muscle actin) expression and increased filopodia formation on slower relaxing hydrogels, resembling their native phenotype. This in vitro model can enable the optimization of stress relaxation for various cell types, including corneal keratocytes, to control tissue formation. Combining stress relaxation optimization with stiffness assessment provides a more accurate tool for studying cell behavior and reduces mechanical mismatch with native tissues in implanted constructs.

Preclinical evaluation of the safety and effectiveness of a new bioartificial cornea

Cross-linking agents are frequently used to restore corneal properties after decellularization, and it is especially important to select an appropriate method to avoid excessive cross-linking. In addition, how to promote wound healing and how to improve scar formation require further investigation. To ensure the safety and efficacy of animal-derived products, we designed bioartificial corneas (BACs) according to the criteria for Class III medical devices. Our BACs do not require cross-linking agents and increase mechanical strength via self-cross-linking of aldehyde-modified hyaluronic acid (AHA) and carboxymethyl chitosan (CMC) on the surface of decellularized porcine corneas (DPCs). The results showed that the BACs had good biocompatibility and transparency, and the modification enhanced their antibacterial and anti-inflammatory properties in vitro. Preclinical animal studies showed that the BACs can rapidly regenerate the epithelium and restore vision within a month. After 3 months, the BACs were gradually filled with epithelial, stromal, and neuronal cells, and after 6 months, their transparency and histology were almost normal. In addition, side effects such as corneal neovascularization, conjunctival hyperemia, and ciliary body hyperemia rarely occur in vivo. Therefore, these BACs show promise for clinical application for the treatment of infectious corneal ulcers and as a temporary covering for corneal perforations to achieve the more time.

A composite hydrogel membrane with shape and water retention for corneal tissue engineering

Tissue engineering (TE) cornea is one of the most potential alternatives to the shortage of corneal donors in cornea transplantation. Sodium alginate (SA) hydrogel is commonly used as scaffold in TE. Herein, we present an approach to construct a composite hydrogel, which with SA fiber skeleton structure for shape retention and gelatin surface modification for water retention. The light transmittance, water retention rate, and swelling rate of hydrogels were characterized, and the tensile mechanical properties were also investigated. Keratinocytes were treated with material extract liquor and the results showed that the gelatin modified SA hydrogel has good cytocompatibility. Furthermore, human corneal stromal fibroblasts (HCSFs) from the lenticules were implanted on the surface of gels, and the SA-gelatin hydrogel significantly improved the adhesion and spreading of HCSFs. Finally, we discussed the improvement and application prospect of the composite hydrogel as cornea equivalents.

Dual-crosslinked regenerative hydrogel for sutureless long-term repair of corneal defect

Corneal transplantation is the most effective clinical treatment for corneal defects, but it requires precise size of donor corneas, surgical sutures, and overcoming other technical challenges. Postoperative patients may suffer graft rejection and complications caused by sutures. Ophthalmic glues that can long-term integrate with the corneal tissue and effectively repair the focal corneal damage are highly desirable. Herein, a hybrid hydrogel consisting of porcine decellularized corneal stroma matrix (pDCSM) and methacrylated hyaluronic acid (HAMA) was developed through a non-competitive dual-crosslinking process. It can be directly filled into corneal defects with various shapes. More importantly, through formation of interpenetrating network and stable amide bonds between the hydrogel and adjacent tissue, the hydrogel manifested excellent adhesion properties to achieve suture-free repair. Meanwhile, the hybrid hydrogel not only preserved bioactive components from pDCSM, but also exhibited cornea-matching transparency, low swelling ratio, slow degradation, and enhanced mechanical properties, which was capable of withstanding superhigh intraocular pressure. The combinatorial hydrogel greatly improved the poor cell adhesion performance of HAMA, supported the viability, proliferation of corneal cells, and preservation of keratocyte phenotype. In a rabbit corneal stromal defect model, the experimental eyes treated with the hybrid hydrogel remained transparent and adhered intimately to the stroma bed with long-term retention, accelerated corneal re-epithelialization and wound healing. Giving the advantages of high bioactivity, low-cost, and good practicality, the dual-crosslinked hybrid hydrogel served effectively for long-term suture-free treatment and tissue regeneration after corneal defect.

•

Double-network hydrogel contains regenerative decellularized corneal stroma matrix.

•

Suture-free easy operation, high transparency, strong attachment to stroma bed.

•

Long-term retention on corneal defect with excellent force and pressure resistance.

•

Rapid re-epithelialization, minimal scar formation, sustained cornea regeneration.

•

A functional biomaterial-based strategy for in situ corneal wound healing.

Customizable Collagen Vitrigel Membranes and Preliminary Results in Corneal Engineering

Corneal opacities are a leading cause of visual impairment that affect 4.2 million people annually. The current treatment is corneal transplantation, which is limited by tissue donor shortages. Corneal engineering aims to develop membranes that function as scaffolds in corneal cell transplantation. Here, we describe a method for producing transplantable corneal constructs based on a collagen vitrigel (CVM) membrane and corneal endothelial cells (CECs). The CVMs were produced using increasing volumes of collagen type I: 1X (2.8 μL/mm²), 2X, and 3X. The vitrification process was performed at 40% relative humidity (RH) and 40 °C using a matryoshka-like system consisting of a shaking-oven harboring a desiccator with a saturated K₂CO₃ solution. The CVMs were characterized via SEM microscopy, cell adherence, FTIR, and manipulation in an ex vivo model. A pilot transplantation of the CECs/CVM construct in rabbits was also carried out. The thickness of the CVMs was 3.65–7.2 µm. The transparency was superior to a human cornea (92.6% = 1X; 94% = 2X; 89.21% = 3X). SEM microscopy showed a homogenous surface and laminar organization. The cell concentration seeded over the CVM increased threefold with no significant difference between 1X, 2X, and 3X (p = 0.323). The 2X-CVM was suitable for surgical manipulation in the ex vivo model. Constructs using the CECs/2X-CVM promoted corneal transparency restoration.

Improving the properties of fish skin collagen/silk fibroin dressing by chemical treatment for corneal wound healing

Natural biomaterials are crucial in ocular tissue engineering because they allow cells to proliferate, differentiate, and stratify while maintaining the typical epithelial phenotype. In this study, membranes as dressings were formed from silk fibroin and collagen (Co) extracted from fish skin and then modified with carbodiimide chemical cross linker in different concentrations. The samples were evaluated by different analyses such as structural, physical (optical, swelling, denaturation temperature, degradation), mechanical, and biological (viability, cell adhesion, immunocytochemistry) assays. The results showed that all membranes have excellent transparency, especially with higher silk fibroin content. Increasing the cross linker concentration and the ratio of silk fibroin to Co increased the denaturation temperature and mechanical strength and, conversely, reduced the degradation rate and cell adhesion. The samples did not show a significant difference in toxicity with increasing cross linker and silk fibroin ratio. In general, samples with a low silk fibroin ratio combined with cross linker can provide desirable properties as a membrane for corneal wound healing.

Effects of Different Radiation Sources on the Performance of Collagen-Based Corneal Repair Materials and Macrophage Polarization

Owing to the lack of donor corneas, there is an urgent need for suitable corneal substitutes. As the main component of the corneal stroma, collagen has great advantages as a corneal repair material. If there are microorganisms such as bacteria in the corneal repair material, it may induce postoperative infection, causing the failure of corneal transplantation. Therefore, irradiation, as a common sterilization method, is often used to control the microorganisms in the material. However, it has not been reported which type of radiation source and what doses can sterilize more effectively without affecting the properties of collagen-based corneal repair materials (CCRMs) and have a positive impact on macrophage polarization. In this study, three different radiation sources of ultraviolet, cobalt-60, and electron beam at four different doses of 2, 5, 8, and 10 kGy were used to irradiate CCRMs. The swelling, stretching, transmittance, and degradation of the irradiated CCRMs were characterized, and the proliferation of human corneal epithelial cells on the irradiated CCRMs was characterized using the CCK8 kit. The results showed that low dose (<5 kGy) of radiation had little effect on the performance of CCRMs. Three irradiation methods with less influence were selected for the further study on RAW264.7 macrophage polarization. The results indicated that CCRMs treated with UV could downregulate the expression of pro-inflammatory related genes and upregulate the expression of anti-inflammatory genes in macrophages, which indicated that UV irradiation is a beneficial process for the preparation of CCRMs.

Polysaccharides, as biological macromolecule-based scaffolding biomaterials in cornea tissue engineering: A review

Corneal-related diseases and injuries are the leading causes of vision loss, estimated to affect over 10 million people worldwide. Currently, cadaveric corneal grafts are considered the gold standard of treatment to restore cornea-related vision. However, this treatment modality faces different challenges such as donor shortage and graft failure. Therefore, the need for alternative solutions continues to grow. Tissue engineering has dramatically progressed to produce artificial cornea implants in order to repair, regenerate, or replace the damaged cornea. In this regard, a variety of polysaccharides such as cellulose, chitosan, alginate, agarose, and hyaluronic acid have been widely explored as scaffolding biomaterials for the production of tissue-engineered cornea. These polymers are known for their excellent biocompatibility, versatile properties, and processability. Recent progress and future perspectives of polysaccharide-based biomaterials in cornea tissue engineering is reviewed here.

Collagen Film with Bionic Layered Structure and High Light Transmittance for Personalized Corneal Repair Fabricated by Controlled Solvent Evaporation Technique

Corneal blindness is a common phenomenon, and corneal transplantation is an effective treatment for corneal defects. However, there is usually a mismatch between the corneal repair material and the degree of the patient’s corneal defect. Therefore, patients with different corneal defects need suitable corneal repair materials with a specific microstructure for personalized treatment. In this research, collagen films with bionic structures were fabricated through ethanol evaporation technique by regulating the volume ratios of collagen solution: ethanol = 10:0(Col)/9:1(CC91)/8:2(CC82)/CC73(CC73). Under various preparation conditions, the obtained collagen films contain layered structures of different density. SEM photos show that the CC73 film with a dense layer arrangement has a microstructure similar to that of the corneal epithelial layer, whereas the Col film has a loose layered structure similar to that of the corneal stroma layer. Four kinds of collagen films showed different optical properties and water absorption ability. A more ordered arrangement of internal layer structure leads to better mechanical properties of the collagen film. In view of this, we think that these collagen films with different microstructures and different interlayer spacing may have huge potential applications for personalized corneal repair.

Preparation and In Vitro Characterization of Gelatin Methacrylate for Corneal Tissue Engineering

BACKGROUND

Corneal disease is second only to cataract considered as the leading cause of blindness in the world, with high morbidity. Construction of corneal substitutes in vitro by tissue engineering technology to achieve corneal regeneration has become a research hotspot in recent years. We conducted in-depth research on the biocompatibility, physicochemical and mechanical properties of rat bone marrow mesenchymal stem cells (rBM-MSCs)-seeded gelatin methacrylate (GelMA) as a bioengineered cornea.

METHODS

Four kinds of GelMA with different concentrations (7, 10, 15 and 30%) were prepared, and their physic-chemical, optical properties, and biocompatibility with rBM-MSCs were characterized. MTT, live/dead staining, cell morphology, immunofluorescence staining and gene expression of keratocyte markers were performed.

RESULTS

7%GelMA hydrogel had higher equilibrium water content and porosity, better optical properties and hydrophilicity. In addition, it is more beneficial to the growth and proliferation of rBM-MSCs. However, the 30%GelMA hydrogel had the best mechanical properties, and could be more conducive to promote the differentiation of rBM-MSCs into keratocyte-like cells.

CONCLUSION

As a natural biological scaffold, GelMA hydrogel has good biocompatibility. And it has the ability to promote the differentiation of rBM-MSCs into keratocyte-like cells, which laid a theoretical and experimental foundation for further tissue-engineered corneal stromal transplantation, and provided a new idea for the source of seeded cells in corneal tissue engineering.

Mechanical Properties of Bioengineered Corneal Stroma

For the majority of patients with severe corneal injury or disease, corneal transplantation is the only suitable treatment option. Unfortunately, the demand for donor corneas greatly exceeds the availability. To overcome shortage issues, a myriad of bioengineered constructs have been developed as mimetics of the corneal stroma over the last few decades. Despite the sheer number of bioengineered stromas developed , these implants fail clinical trials exhibiting poor tissue integration and adverse effects in vivo. Such shortcomings can partially be ascribed to poor biomechanical performance. In this review, existing approaches for bioengineering corneal stromal constructs and their mechanical properties are described. The information collected in this review can be used to critically analyze the biomechanical properties of future stromal constructs, which are often overlooked, but can determine the failure or success of corresponding implants.

Therapeutic contact lenses fabricated by hyaluronic acid and silver incorporated bovine serum albumin porous films for the treatment of alkali-burned corneal wound

Hyaluronic acid (HA) was covalently linked to the surface of bovine serum albumin/silver (BSA/Ag) porous films to fabricate a possible contact lens. The BSA/Ag/HA films showed favorable properties as contact lenses, including acceptable transparency, high water content, good hemocompatibility, non-cytotoxicity and antibacterial properties. The therapeutic potential of the BSA/Ag/HA films was evaluated on an alkali burn-induced corneal injury model on mice. The corneal healing rate was enhanced, the corneal opacification and neovascularization were lessened, and the inflammation response was reduced. The chemical cross-linking of HA on the films prolonged the retention time of HA on the corneal surface, thus enhanced the drug efficacy and improved the patient compliance, proving the high potential of BSA/Ag/HA films as contact lenses.

Rose petal topography mimicked poly(dimethylsiloxane) substrates for enhanced corneal endothelial cell behavior

Low proliferation capacity of corneal endothelial cells (CECs) and worldwide limitations in transplantable donor tissues reveal the critical need of a robust approach for in vitro CEC growth. However, preservation of CEC-specific phenotype with increased proliferation has been a great challenge. Here we offer a biomimetic cell substrate design, by optimizing mechanical, topographical and biochemical characteristics of materials with CEC microenvironment. We showed the surprising similarity between topographical features of white rose petals and corneal endothelium due to hexagonal cell shapes and physiologically relevant cell density (≈ 2000 cells/mm²). Polydimethylsiloxane (PDMS) substrates with replica of white rose petal topography and cornea-friendly Young's modulus (211.85 ± 74.9 kPa) were functionalized with two of the important corneal extracellular matrix (ECM) components, collagen IV (COL 4) and hyaluronic acid (HA). White rose petal patterned and COL 4 modified PDMS with optimized stiffness provided enhanced bovine CEC response with higher density monolayers and increased phenotypic marker expression. This biomimetic approach demonstrates a successful platform to improve in vitro cell substrate properties of PDMS for corneal applications, suggesting an alternative environment for CEC-based therapies, drug toxicity investigations, microfluidics and organ-on-chip applications.

Applications of Hyaluronic Acid in Ophthalmology and Contact Lenses

Hyaluronic acid (HA) is a glycosaminoglycan that was first isolated and identified from the vitreous body of a bull’s eye. HA is ubiquitous in the soft connective tissues of animals and therefore has high tissue compatibility for use in medication. Because of HA’s biological safety and water retention properties, it has many ophthalmology-related applications, such as in intravitreal injection, dry eye treatment, and contact lenses. Due to its broad range of applications, the identification and quantification of HA is a critical topic. This review article discusses current methods for analyzing HA. Contact lenses have become a widely used medical device, with HA commonly used as an additive to their production material, surface coating, and multipurpose solution. HA molecules on contact lenses retain moisture and increase the wearer’s comfort. HA absorbed by contact lenses can also gradually release to the anterior segment of the eyes to treat dry eye. This review discusses applications of HA in ophthalmology.

Best of Both Hydrogel Worlds: Harnessing Bioactivity and Tunability by Incorporating Glycosaminoglycans in Collagen Hydrogels

Collagen, the most abundant protein in mammals, has garnered the interest of scientists for over 50 years. Its ubiquitous presence in all body tissues combined with its excellent biocompatibility has led scientists to study its potential as a biomaterial for a wide variety of biomedical applications with a high degree of success and widespread clinical approval. More recently, in order to increase their tunability and applicability, collagen hydrogels have frequently been co-polymerized with other natural and synthetic polymers. Of special significance is the use of bioactive glycosaminoglycans-the carbohydrate-rich polymers of the ECM responsible for regulating tissue homeostasis and cell signaling. This review covers the recent advances in the development of collagen-based hydrogels and collagen-glycosaminoglycan blend hydrogels for biomedical research. We discuss the formulations and shortcomings of using collagen in isolation, and the advantages of incorporating glycosaminoglycans (GAGs) in the hydrogels. We further elaborate on modifications used on these biopolymers for tunability and discuss tissue specific applications. The information presented herein will demonstrate the versatility and highly translational value of using collagen blended with GAGs as hydrogels for biomedical engineering applications.

Bioengineering Approaches for Corneal Regenerative Medicine

BACKGROUND

Since the cornea is responsible for transmitting and focusing light into the eye, injury or pathology affecting any layer of the cornea can cause a detrimental effect on visual acuity. Aging is also a reason for corneal degeneration. Depending on the level of the injury, conservative therapies and donor tissue transplantation are the most common treatments for corneal diseases. Not only is there a lack of donor tissue and risk of infection/rejection, but the inherent ability of corneal cells and layers to regenerate has led to research in regenerative approaches and treatments.

METHODS

In this review, we first discussed the anatomy of the cornea and the required properties for reconstructing layers of the cornea. Regenerative approaches are divided into two main categories; using direct cell/growth factor delivery or using scaffold-based cell delivery. It is expected delivered cells migrate and integrate into the host tissue and restore its structure and function to restore vision. Growth factor delivery also has shown promising results for corneal surface regeneration. Scaffold-based approaches are categorized based on the type of scaffold, since it has a significant impact on the efficiency of regeneration, into the hydrogel and non-hydrogel based scaffolds. Various types of cells, biomaterials, and techniques are well covered.

RESULTS

The most important characteristics to be considered for biomaterials in corneal regeneration are suitable mechanical properties, biocompatibility, biodegradability, and transparency. Moreover, a curved shape structure and spatial arrangement of the fibrils have been shown to mimic the corneal extracellular matrix for cells and enhance cell differentiation.

CONCLUSION

Tissue engineering and regenerative medicine approaches showed to have promising outcomes for corneal regeneration. However, besides proper mechanical and optical properties, other factors such as appropriate sterilization method, storage, shelf life and etc. should be taken into account in order to develop an engineered cornea for clinical trials.

Recent developments in regenerative ophthalmology

Regenerative medicine (RM) is one of the most promising disciplines for advancements in modern medicine, and regenerative ophthalmology (RO) is one of the most active fields of regenerative medicine. This review aims to provide an overview of regenerative ophthalmology, including the range of tools and materials being used, and to describe its application in ophthalmologic subspecialties, with the exception of surgical implantation of artificial tissues or organs (e.g., contact lens, artificial cornea, intraocular lens, artificial retina, and bionic eyes) due to space limitations. In addition, current challenges and limitations of regenerative ophthalmology are discussed and future directions are highlighted.

Hyaluronic Acid-Pluronic®F127-Laden Soft Contact Lenses for Corneal Epithelial Healing: In Vitro and In Vivo Studies

Hyaluronic acid (HA) is widely used to treat various ocular diseases like dry eye syndrome, keratoconus, and other corneal epithelial injuries. The currently available eye drop solutions need frequent doses affecting the routine life style of patients. In this work, the silicone contact lens was designed to entrap HA and Pluronic®F127 to improve the wettability of the contact lens to treat various ocular diseases. The soaking method (HA-SM) was compared with the direct entrapment (DL-HA-PI) technique. The HA-Pluronic®F127-laden contact lenses (DL-HA-PI) showed acceptable optical transmittance with improved swelling (water content) properties. The in vitro release data showed high burst release with HA-SM contact lenses (12-36 h), while DL-HA-PI contact lenses showed prolong release up to 96 h. The in vivo release in the rabbit tear fluid showed high HA concentration (tear fluid) with DL-HA-PI contact lenses in comparison to the HA-SM contact lenses. The DL-HA-PI-3 batch with Pluronic®F127 showed more promising results in schirmer strip study in comparison to DL-HA-3 batch (without Pluronic®F127). The presence of Pluronic®F127 with HA showed high potential to improve hydration property of the contact lens. The corneal healing model showed reduction in the ocular inflammatory symptoms with DL-HA-PI-3 batch, thus demonstrating the potential of HA and Pluronic®F127 to be used in various ocular diseases.

Construction and Evaluation of Collagen-Based Corneal Grafts Using Polycaprolactone To Improve Tension Stress

The emergence of innovative surgical procedures using partial thickness corneal transplant has created a need for the development of corneal grafts to replace pathologic corneal tissue. Corneal repair materials have been successfully prepared in the past 10 years, but they were difficult to be used in clinics because of the unbearable tension caused by interrupted suture during routine surgery. However, polycaprolactone (PCL), a medical polymer material, can solve this problem. Therefore, a hierarchical collagen (Col)-based corneal graft with curvature, consisting of a transparent core part composed of collagen in the center and a mechanically robust fixed part containing collagen and polycaprolactone in the edge, was used as a potential corneal graft for corneal repair and regeneration in this study. The hierarchical collagen-based corneal grafts [collagen-polycaprolactone (Col-PCL) membranes] that are capable of mimicking the native cornea were developed based on chemical and thermal crosslinking mechanisms. The water adsorption of Col-PCL membranes could reach over 80% similar to that of human cornea, and its swelling could reach over 400%. More importantly, the formed Col-PCL membranes could resist a larger tensile strength (1.1 ± 0.03 MPa) before rupturing in comparison with pure collagen membranes and polycaprolactone membranes. Furthermore, the biodegradable Col-PCL membranes could facilitate cell adhesion and proliferation as well as cell migration (exhibiting epithelial wound coverage in <5 days), which showed promise as corneal grafts for cornea tissue engineering.

Specialty Tough Hydrogels and Their Biomedical Applications

Hydrogels have long been explored as attractive materials for biomedical applications given their outstanding biocompatibility, high water content, and versatile fabrication platforms into materials with different physiochemical properties and geometries. Nonetheless, conventional hydrogels suffer from weak mechanical properties, restricting their use in persistent load-bearing applications often required of materials used in medical settings. Thus, the fabrication of mechanically robust hydrogels that can prolong the lifetime of clinically suitable materials under uncompromising in vivo conditions is of great interest. This review focuses on design considerations and strategies to construct such tough hydrogels. Several promising advances in the proposed use of specialty tough hydrogels for soft actuators, drug delivery vehicles, adhesives, coatings, and in tissue engineering settings are highlighted. While challenges remain before these specialty tough hydrogels will be deemed translationally acceptable for clinical applications, promising preliminary results undoubtedly spur great hope in the potential impact this embryonic research field can have on the biomedical community.

Cell Loaded GelMA:HEMA IPN hydrogels for corneal stroma engineering

Stroma is the main refractive element of the cornea and damage to it is one of the main causes of blindness. In this study, cell loaded hydrogels of methacrylated gelatin (GelMA) and poly(2-hydroxyethyl methacrylate) (pHEMA) (8:2) interpenetrating network (IPN) hydrogels were prepared as the corneal stroma substitute and tested in situ and in vitro. Compressive modulus of the GelMA hydrogels was significantly enhanced with the addition of pHEMA in the structure (6.53 vs 155.49 kPa, respectively). More than 90% of the stromal keratocytes were viable in the GelMA and GelMA-HEMA hydrogels as calculated by Live-Dead Assay and NIH Image-J program. Cells synthesized representative collagens and proteoglycans in the hydrogels indicating that they preserved their keratocyte functions. Transparency of the cell loaded GelMA-HEMA hydrogels was increased significantly up to 90% at 700 nm during three weeks of incubation and was comparable with the transparency of native cornea. Cell loaded GelMA-HEMA corneal stroma model is novel and reported for the first time in the literature in terms of introduction of cells during the preparation phase of the hydrogels. The appropriate mechanical strength and high transparency of the cell loaded constructs indicates a viable alternative to the current devices used in the treatment of corneal blindness.

Potential of novel electrospun core-shell structured polyurethane/starch (hyaluronic acid) nanofibers for skin tissue engineering: In vitro and in vivo evaluation

The biomaterials with excellent biocompatibility and biodegradability ¬can lead to satisfactory wound healing. In this study, core-shell structured PU (polyurethane)/St (Starch) and PU/St (Hyaluronic Acid (HA)) nanofibers were fabricated with coaxial electrospinning technique. The morphology characterization of the core-shell structure of nanofibers was investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images. Contact-angle measurements were confirmed the core/shell structure of the electrospun nanofibers with shell and core feed rates of 0.675 L/min and <0.135 L/min, respectively. The average fiber diameter values were calculated for polyurethane nanofibers (836 ± 172.13 nm), PU/St nanofibers (612 ± 93.21 nm) and PU/St (HA) nanofibers (428 ± 78.32 nm). The average porosity values of scaffolds were determined for PU (1.251 ± 0.235 μm), PU/St (1.734 ± 0.284 μm) and PU/St (HA) (3.186 ± 0.401 μm). The core-shell PU/St and PU/St (HA) nanofibers were evaluated in vitro by using mouse fibroblasts (L929) cells. Cell morphology and viability results were exhibited significant enhancement in cell promoting and cell attachment. Furthermore, in vivo studies was indicated Core-shell PU/St (HA) wound dressing can be an appropriate candidate for skin tissue engineering and wound healing.

Electrospun gelatin/PCL and collagen/PCL scaffolds for modulating responses of bone marrow endothelial progenitor cells

The determination of potential transplantable substrates and substitution cells for corneal endothelium transplantation may compensate for the shortage of cornea donors. Appropriate biodegradable and biocompatible tissue-engineered substratum with seed cells for endothelial keratoplasty has been increasingly studied. In the present study, electrospun gelatin/polycaprolactone (PCL) and collagen/PCL scaffolds were successfully established. Bone marrow endothelial progenitor cells (BEPCs) were cultured on these scaffolds to determine whether the scaffolds may promote the proliferation of BEPCs as well as maintain stem cell characteristics. Two variations of hybrid scaffolds, collagen/PCL (70% collagen and 30% PCL) and gelatin/PCL (70% gelatin and 30% PCL), were established via electrospinning. Microscopic structure, hydrophilicity and wettability of the two scaffolds were subsequently investigated. BEPCs were separately cultured on the scaffolds and were also seeded on glass slides to establish the control group. Furthermore, cell morphology; adherence, as determined by investigation of F-actin expression levels; proliferation, as determined via Cell Counting Kit-8 assays, Ki-67 staining and bromodeoxyuridine (BrdU) staining; and stem cell markers, as determined by cluster of differentiation (CD)-34 and CD-133 protein expression levels; were investigated. In addition, reverse transcription-quantitative polymerase chain reaction (RT-qPCR) was performed to determine gene expression. The two nanofiber scaffolds were established using electrospun techniques with expected hydrophilicity, wettability and biocompatibility. BEPCs were revealed to spread well on and strongly adhere to the collagen/PCL (70:30) and gelatin/PCL (70:30) scaffolds. Furthermore, Ki-67 and BrdU staining results revealed greater levels of positive dots on the two hybrid scaffolds compared with the control group. CD-34 and CD-133 protein staining demonstrated increased levels of fluorescence intensity on scaffolds compared with the control group. Furthermore, increased expression levels of differentiation markers, such as ATP binding cassette subfamily G member 2, leucine rich repeat containing G protein-coupled receptor 5 and CD166, were detected on both scaffolds. RT-qPCR results demonstrated that the expression of caspase-3, which is associated with apoptosis, was decreased on the two scaffolds compared with in the control group. The expression of inflammatory factors, including interleukin (IL)-1, exhibited a significant decrease on the gelatin/PCL scaffold compared with in the control group; whereas the difference between the expression level of IL-1 exhibited by the collagen/PCL group and the control group were not markedly different. Electrospun collagen/PCL and gelatin/PCL scaffolds exhibited the potential to enhance the adherence and proliferation of BEPCs. BEPCs cultured on the two scaffolds demonstrated increased stem cell characteristics and differentiation potential. Electrospun gelatin/PCL and collagen/PCL scaffolds may represent a promising substratum in tissue-engineered corneal endothelium.

The Collagen Suprafamily: From Biosynthesis to Advanced Biomaterial Development

Collagen is the oldest and most abundant extracellular matrix protein that has found many applications in food, cosmetic, pharmaceutical, and biomedical industries. First, an overview of the family of collagens and their respective structures, conformation, and biosynthesis is provided. The advances and shortfalls of various collagen preparations (e.g., mammalian/marine extracted collagen, cell-produced collagens, recombinant collagens, and collagen-like peptides) and crosslinking technologies (e.g., chemical, physical, and biological) are then critically discussed. Subsequently, an array of structural, thermal, mechanical, biochemical, and biological assays is examined, which are developed to analyze and characterize collagenous structures. Lastly, a comprehensive review is provided on how advances in engineering, chemistry, and biology have enabled the development of bioactive, 3D structures (e.g., tissue grafts, biomaterials, cell-assembled tissue equivalents) that closely imitate native supramolecular assemblies and have the capacity to deliver in a localized and sustained manner viable cell populations and/or bioactive/therapeutic molecules. Clearly, collagens have a long history in both evolution and biotechnology and continue to offer both challenges and exciting opportunities in regenerative medicine as nature's biomaterial of choice.

Collagen-based materials combined with microRNA for repairing cornea wounds and inhibiting scar formation

AuNP/miR-133b can be released from cornea regeneration materials and entered into stromal cells to inhibit cornea scar formation.

Preparation and in vitro characterization of cross-linked collagen-gelatin hydrogel using EDC/NHS for corneal tissue engineering applications

Corneal disease is considered as the second leading cause of vision loss and keratoplasty is known as an effective treatment for it. However, the tissue engineered corneal substitutes are promising tools in experimental in vivo repair of cornea. Selecting appropriate cell sources and scaffolds are two important concerns in corneal tissue engineering. The object of this study was to investigate biocompatibility and physical properties of the bio-engineered cornea, fabricated from type-I collagen (COL) and gelatin (Gel). Two gelatin based hydrogels cross-linked with EDC/NHS were fabricated, and their physicochemical properties such as equilibrium water content, enzymatic degradation, mechanical properties, rheological, contact angle and optical properties as well as their ability to support human bone-marrow mesenchymal stem cells (hBM-MSCs) survival were characterized. The equilibrium water content and enzymatic degradation of these hydrogels can be easily controlled by adding COL. Our findings suggest that incorporation of COL-I increases optical properties, hydrophilicity, stiffness and Young's modulus. The viability of hBM-MSCs cultured in Gel and Gel: COL was assessed via CCK-8 assay. Also, the morphology of the hBM-MSCs on the top of Gel and Gel: COL hydrogels were characterized by phase-contrast microscopy. This biocompatible hydrogel may promise to be used as artificial corneal substitutes.

Innovative strategies for intervertebral disc regenerative medicine: From cell therapies to multiscale delivery systems

As our understanding of the physiopathology of intervertebral disc (IVD) degeneration has improved, novel therapeutic strategies have emerged, based on the local injection of cells, bioactive molecules, and nucleic acids. However, with regard to the harsh environment constituted by degenerated IVDs, protecting biologics from in situ degradation while allowing their long-term delivery is a major challenge. Yet, the design of the optimal approach for IVD regeneration is still under debate and only a few papers provide a critical assessment of IVD-specific carriers for local and sustained delivery of biologics. In this review, we highlight the IVD-relevant polymers as well as their design as macro-, micro-, and nano-sized particles to promote endogenous repair. Finally, we illustrate how multiscale systems, combining in situ-forming hydrogels with ready-to-use particles, might drive IVD regenerative medicine strategies toward innovation.

Collagen membranes crosslinked by β-cyclodextrin polyrotaxane monoaldehyde with good biocompatibilities and repair capabilities for cornea repair

Better mechanical properties; suturability; corneal regeneration.