Enzyme distribution and secondary structure of sol–gel immobilized glucose oxidase by micro-attenuated total reflection FT-IR spectroscopy

Anchoring Effect-Induced Conformation Remodeling in Epoxy-Functionalized Covalent Organic Frameworks for Enhanced Enzymatic Efficiency

Covalent organic frameworks (COFs) with tunable structures and versatile chemical functionalities offer great promise for enzyme immobilization. This study explores the "anchoring effect" induced by covalent bonding, which significantly enhances enzymatic efficiency. Glucose oxidase (GOx) was covalently immobilized onto an epoxy-functionalized COF (oCOF-TATP) by incorporating epoxy groups into the COF framework. The covalent immobilization approach increased the enzyme loading from 26 mg/g (physical adsorption) to 40 mg/g. Secondary structure analysis revealed that the covalent binding promoted a shift from the α-helix to the β-sheet structure, with a more substantial effect than physical adsorption. Molecular dynamics simulations further confirmed that the anchoring effect enhanced structural rigidity and exposed the enzyme's active site. This led to an 8.14% increase in accessible surface area and a 7.55% rise in hydrogen bonding interactions. These structural improvements resulted in significant catalytic enhancements, with the turnover rate (kcat) and catalytic efficiency (kcat/KM) of GOx ⊂ oCOF-TATP reaching 197 and 388% of the free enzyme, respectively. In glucose oxidation assays, the immobilized enzyme exhibited 115% of the product compared to free GOx, maintaining over 95% activity after six reuse cycles and demonstrating superior stability under various conditions. The "anchoring effect" represents a novel mechanism for optimizing enzyme performance and operational stability.

Metal ion of metal-organic frameworks facilitating immobilized chitinase performance

Metal-organic framework (MOF) structures containing different metal ions and 1,3,5-trimesic acid (BTC) were fabricated, as the carriers to immobilize chitinase (Chi) for improving the performance of Chi, for the first time. It was found that the immobilization of Chi on Ca-BTC, Ba-BTC, and Ni-BTC increased its activity. Notably, the specific activity of Chi@Ca-BTC was enhanced by 2.1 times that of free Chi, reaching 16.27 U/mg. The catalytic efficiency and substrate affinity of Chi@Ca-BTC were also remarkably improved, confirmed by the kcat/Km enhancement (4.2 times) and Km value reduction (40 %). Moreover, the half-life of Chi@Ca-BTC at the optimum pH 6.0 and 55 °C was prolonged from 1.8 h to 6.8 h. More than 80 % of enzyme activity was retained after 22 cycles of usage, showing superior reusability. It was proved that Ca2+ on MOF surface enhanced the formation of hydrogen bonds between the catalytic key amino acid Glu-405 and substrate, accelerating the enzymatic catalysis. Then, Chi@Ca-BTC was employed as an outstanding biocatalytic platform for the degradation of chitin, with 8.1 times increase in conversion efficiency. Such a MOF-based immobilization strategy for improving enzymatic performance is of considerable reference value in designing advanced immobilized enzyme for various polysaccharide biocatalytic reaction.

A wearable enzyme sensor enabled by the floating-gate OECT with poly(benzimidazobenzophenanthroline) as the catalytic layer

With the advantages of miniaturization, simple device structure, and fast response, the organic electrochemical transistor (OECT) has become an emerging platform for developing wearable enzyme sensors for real-time health monitoring. The floating gate (FG) OECT employs a distinct signal acquisition and amplification structure, mitigating the effects of non-specific physical adsorption during the sensing process and preventing contamination of the electrolyte solution by side reaction products. The current work reports a feasible wearable enzyme sensor using a poly(benzimidazobenzophenanthroline) (BBL)-Nafion-enzyme-Nafion stacking structure as the sensing layer of the FG OECT. Based on the experimental results, the BBL film with an area of 3.14 mm2 and a thickness of 175 nm can generate an open circuit potential of 199.61 mV in 10- 1 M hydrogen peroxide compared with the blank control. Then, the FG OECT is integrated with the flexible microfluidic systems for on-skin detection of glucose, lactate, and uric acid with sensitivities of 92.47, 152.15, and 74.27 µA·dec- 1, respectively. This FG OECT-based wearable enzyme sensor will open new windows for multiplexed detection of sweat metabolites.

Infrared Spectroscopy of SARS-CoV-2 Viral Protein: from Receptor Binding Domain to Spike Protein

Spike (S) glycoprotein is the largest structural protein of SARS-CoV-2 virus and the main one involved in anchoring of the host receptor ACE2 through the receptor binding domain (RBD). S protein secondary structure is of great interest for shedding light on various aspects, from functionality to pathogenesis, finally to spectral fingerprint for the design of optical biosensors. In this paper, the secondary structure of SARS-CoV-2 S protein and its constituting components, namely RBD, S1 and S2 regions, are investigated at serological pH by measuring their amide I infrared absorption bands through Attenuated Total Reflection Infrared (ATR-IR) spectroscopy. Experimental data in combination with MultiFOLD predictions, Define Secondary Structure of Proteins (DSSP) web server and Gravy value calculations, provide a comprehensive understanding of RBD, S1, S2, and S proteins in terms of their secondary structure content, conformational order, and interaction with the solvent.

Insights on early response to acute heat shock of bovine mammary epithelial cells through a multimethod approach

Heat stress is a significant challenge in dairy cattle herds, affecting milk production and quality, and generating important changes at the cellular level. Most in vitro research on heat shock (HS) effects on dairy cow mammary cells was focused on medium-long-term effects. In recent years, Fourier transform-infrared (FT-IR) micro-spectroscopy has been increasingly used to study the effects of several external stresses on different cell lines, down to the level of single cellular components, such as DNA/RNA, lipids, and proteins. In this study, the possible changes at the biochemical and molecular level induced by acute (30 min-2 h) HS in bovine mammary epithelial (BME-UV1) cells were investigated. The cells were exposed to different temperatures, thermoneutral (TN, 37 °C) and HS (42 °C), and FT-IR spectra were acquired to analyse the effects of HS on biochemical characteristics of BME-UV1 cellular components (proteins, lipids, and DNA/RNA). Moreover, cell viability assay, reactive oxygen species production, and mRNA expression of heat shock proteins (HSPA1A, HSP90AA1, GRP78, GRP94) and antioxidant genes (SOD1, SOD2) by RT-qPCR were also analysed. The FT-IR results showed a change already at 30 min of HS exposure, in the content of long-chain fatty acids, which probably acted as a response to a modification of membrane fluidity in HS cells compared with TN cells. After 2 h of HS exposure, modification of DNA/RNA activity and accumulation of aggregated proteins was highlighted in HS cells. The gene expression analyses showed the overexpression of HSPA1A and HSP90AA1 starting from 30 min up to 2 h in HS cells compared with TN cells. At 2 h of HS exposure, also the overexpression of GRP94 was observed in HS cells. Acute HS did not affect cell viability, reactive oxygen species level, and SOD1 and SOD2 gene expression of BME-UV1 cells. According to the results obtained, cells initiate early defence mechanisms in case of acute HS and probably this efficient response capacity may be decisive for tolerance to heat stress of dairy cattle.

A Co-Immobilized Enzyme-Mediator System for Facilitating Manganese Peroxidase Catalysis in Solution Free of Divalent Manganese Ions

Manganese peroxidase (MnP) offers significant potential in various environmental and industrial applications; however, its reliance on Mn2+ ions for electron shuttling limits its use in Mn2+-deficient systems. Herein, a novel approach is presented to address this limitation by co-immobilizing MnP and Mn2+ in silica gels. These gels were synthesized following the standard sol-gel method and found to effectively immobilize Mn2+ ions, primarily through electrostatic interactions. The MnP co-immobilized with Mn2+ ions in the silica gel exhibited 4-5 times higher activity than the MnP immobilized alone in activity assays, and generated Mn3+ within the gel, indicating the immobilized Mn2+ ions remain capable of shuttling electrons to the co-immobilized MnP. In decolorization tests with two organic dyes, the co-immobilized system also outperformed the MnP immobilized without Mn2+ ions, resulting in 2-4 times higher dye removals. This study will enable a broader application of MnP enzymes in sustainable environmental remediation and industrial catalysis.

Enhancing Enzyme Activity Using Hydrophilic Hollow Layered Double Hydroxides as Encapsulation Carriers

Enzyme immobilization enables the fabrication of flexible and powerful biocatalytic systems that can meet the needs of green and efficient development in various fields. However, restricted electron and mass transfer during enzymatic reactions and disruption of the enzyme structure during encapsulation limit the wide application of the immobilized enzyme systems. Herein, we report an encapsulation strategy based on hollow-shell-layered double hydroxides (LDHs; ZnCo-LDH) for green and nondestructive enzyme immobilization. Benefiting from the protective and enzyme-friendly microenvironment provided by the hydrophilic hollow structure of ZnCo-LDH, the encapsulated enzyme maintains a nearly natural enzyme biostructure and enhanced stability. Notably, mesoporous ZnCo-LDH with excellent electrical properties considerably facilitates electron and mass transport during enzymatic reactions, exhibiting 5.56 times the catalytic efficiency of free enzymes or traditional enzyme encapsulation systems. The current study broadens the family of encapsulated carriers and alleviates the trade-off between enzyme stability and catalytic activity in the encapsulated state, presenting a promising avenue for the industrial application of the enzyme.

Vibrational spectroscopies for biochemical investigation of X-ray exposure effects on SH-SY5Y human neuroblastoma cells

Neuroblastoma is the most recurring cancer in childhood and adolescence. The SH-SY5Y neuroblastoma cell line is generally adopted for elaborating new therapeutical approaches and/or elaborating strategies for the prevention of central nervous system disturbances. In fact, it represents a valid model system for investigating in vitro the effects on the brain of X-ray exposure using vibrational spectroscopies that can detect early radiation-induced molecular alterations of potential clinical usefulness. In recent years, we dedicated significant efforts in the use of Fourier-transform and Raman microspectroscopy techniques for characterizing such radiation-induced effects on SH-SY5Y cells by examining the contributions from different cell components (DNA, proteins, lipids, and carbohydrates) to the vibrational spectra. In this review, we aim at revising and comparing the main results of our studies to provide a wide outlook of the latest outcomes and a framework for future radiobiology research using vibrational spectroscopies. A short description of our experimental approaches and data analysis procedures is also reported.

Robust cross-linked cyclodextrin glucanotransferase from Bacillus lehensis G1 aggregates using an improved cross-linker and a new co-aggregant for the production of cyclodextrins

One of the potentials of carrier-free cross-linked enzyme aggregates (CLEA) immobilization is the ability to be separated and reuse. Yet, it might be impeded by the poor mechanical stability resulting low recyclability. CLEA of CGTase from Bacillus lehensis G1 (CGTase G1-CLEA) using chitosan (CS) as a cross-linker demonstrated high activity recovery however, displayed poor reusability. Therefore, the relationship between mechanical strength and reusability is studied by enhancing the CS mechanical properties and applying a new co-aggregation approach. Herein, CS was chemically cross-linked with glutaraldehyde (GA) and GA was introduced as a co-aggregant (coGA). CGTase G1-CLEA developed using an improved synthesized chitosan-glutaraldehyde (CSGA) cross-linker and a new coGA technique showed to increase its mechanical stability which retained 63.4% and 52.2%, respectively compared to using CS that remained 33.1% of their initial activity after stirred at 500 rpm. The addition of GA impacted the morphology and interaction consequently stabilizing the CLEAs durability in production of cyclodextrins. As a result, the reusability of CGTase G1-CLEA with CSGA and coGA increased by 56.6% and 42.8%, respectively compared to previous CLEA after 5 cycles for 2 h of reaction. This verifies that the mechanical strength of immobilized enzyme influences the improvement of its operational stability.

Secondary Structures of MERS-CoV, SARS-CoV, and SARS-CoV-2 Spike Proteins Revealed by Infrared Vibrational Spectroscopy

All coronaviruses are characterized by spike glycoproteins whose S1 subunits contain the receptor binding domain (RBD). The RBD anchors the virus to the host cellular membrane to regulate the virus transmissibility and infectious process. Although the protein/receptor interaction mainly depends on the spike's conformation, particularly on its S1 unit, their secondary structures are poorly known. In this paper, the S1 conformation was investigated for MERS-CoV, SARS-CoV, and SARS-CoV-2 at serological pH by measuring their Amide I infrared absorption bands. The SARS-CoV-2 S1 secondary structure revealed a strong difference compared to those of MERS-CoV and SARS-CoV, with a significant presence of extended β-sheets. Furthermore, the conformation of the SARS-CoV-2 S1 showed a significant change by moving from serological pH to mild acidic and alkaline pH conditions. Both results suggest the capability of infrared spectroscopy to follow the secondary structure adaptation of the SARS-CoV-2 S1 to different environments.

Direct Electron Transfer of Glucose Oxidase on Pre-Anodized Paper/Carbon Electrodes Modified through Zero-Length Cross-Linkers for Glucose Biosensors

A disposable paper-based glucose biosensor with direct electron transfer (DET) of glucose oxidase (GOX) was developed through simple covalent immobilization of GOX on a carbon electrode surface using zero-length cross-linkers. This glucose biosensor exhibited a high electron transfer rate (ks, 3.363 s-1) as well as good affinity (km, 0.03 mM) for GOX while keeping innate enzymatic activities. Furthermore, the DET-based glucose detection was accomplished by employing both square wave voltammetry and chronoamperometric techniques, and it achieved a glucose detection range from 5.4 mg/dL to 900 mg/dL, which is wider than most commercially available glucometers. This low-cost DET glucose biosensor showed remarkable selectivity, and the use of the negative operating potential avoided interference from other common electroactive compounds. It has great potential to monitor different stages of diabetes from hypoglycemic to hyperglycemic states, especially for self-monitoring of blood glucose.

A novel microbial-derived family 19 endochitinase with exochitinase activity and its immobilization

A novel chitinase gene of 888 bp from Streptomyces bacillaris was cloned and expressed in Escherichia coli BL21. The purified recombinant enzyme (SbChiAJ103) was identified as the first microbial-derived family 19 endochitinase that showed exochitinase activity. SbChiAJ103 exhibited the substrate preference for N-acetylchitooligosaccharides with even degrees of polymerization and the capability to specifically hydrolyze colloidal chitin into (GlcNAc)₂. Mono-methyl adipate was employed as a novel linker for the efficient covalent immobilization of chitinase on magnetic nanoparticles (MNPs). The immobilized SbChiAJ103, SbChiAJ103@MNPs, exhibited superior pH tolerance, temperature stability, and storage stability than free SbChiAJ103. Even after incubation at 45 °C for 24 h, SbChiAJ103@MNPs could retain more than 60.0% initial activity. As a result, the enzymatic hydrolysis yield of SbChiAJ103@MNPs increased to 1.58 times that of free SbChiAJ103. Moreover, SbChiAJ103@MNPs could be reused by convenient magnetic separation. After 10 recycles, SbChiAJ103@MNPs could retain almost 80.0% of its initial activity. The immobilization of the novel chitinase SbChiAJ103 paves the way to the efficient and eco-friendly commercial production of (GlcNAc)₂. KEY POINTS: • The first microbial GH19 endochitinase with exochitinase activity was reported. • Mono-methyl adipate was first employed to immobilize chitinase. • SbChiAJ103@MNPs showed excellent pH stability, thermal stability, and reusability.

X-rays induced alterations in mechanical and biochemical properties of isolated SH-SY5Y nuclei

BACKGROUND

The use of ionizing radiations in radiotherapy is an effective and very common cancer treatment after surgery. Although ionizing-radiation DNA damages are extensively investigated, little is known about their effects on the other nuclear components, since their variations when studied in whole cells can be difficult to decouple from those of the cytoplasmatic structures. The organization of nuclear components plays a functional role since they are directly involved in some of the nuclear response to chemical or physical stimuli. For this reason, studying the X-ray effects on nuclear components is a crucial step in radiobiology.

MATERIALS AND METHODS

We have used Atomic Force Microscopy (AFM) and micro-FTIR to examine the biomechanical and biochemical properties of hydrated fixed nuclei isolated from neuroblastoma (SH-SY5Y) cells irradiated by 2, 4, 6 and 8 Gy X-ray doses.

RESULTS

The experimental results have shown that, already at 2 Gy irradiation dose, the nuclei exhibit not only a DNA damage, but also relevant alterations of lipid saturation, protein secondary structure arrangement and a significant decrease in nuclear stiffness, which indicate a remarkable chromatin decondensation.

CONCLUSIONS AND GENERAL SIGNIFICANCE

The present work demonstrates that a multi-technique approach, able to disclose multiple features, can be helpful to achieve a comprehensive picture of the X-ray irradiation effects of the nuclear components and distinguish them from those occurring at the level of cytoplasm.

Characterization of Carboxylic Acid Reductase from Mycobacterium phlei Immobilized onto Seplite LX120

A multi-domain oxidoreductase, carboxylic acid reductase (CAR), can catalyze the one-step reduction of carboxylic acid to aldehyde. This study aimed to immobilize bacterial CAR from a moderate thermophile Mycobacterium phlei (MpCAR). It was the first work reported on immobilizing bacterial CAR onto a polymeric support, Seplite LX120, via simple adsorption. Immobilization time and protein load were optimized for MpCAR immobilization. The immobilized MpCAR showed optimal activity at 60 °C and pH 9. It was stable over a wide range of temperatures (10 to 100 °C) and pHs (4–11), retaining more than 50% of its activity. The immobilized MpCAR also showed stability in polar solvents. The adsorption of MpCAR onto the support was confirmed by Scanning Electron Microscopy (SEM), Fourier-Transform Infrared (FTIR) spectroscopy, and Brunauer–Emmett–Teller (BET) analysis. The immobilized MpCAR could be stored for up to 6 weeks at 4 °C and 3 weeks at 25 °C. Immobilized MpCAR showed great operational stability, as 59.68% of its activity was preserved after 10 assay cycles. The immobilized MpCAR could also convert approximately 2.6 mM of benzoic acid to benzaldehyde at 60 °C. The successfully immobilized MpCAR on Seplite LX120 exhibited improved properties that benefit green industrial processes.

Biosynthesis of Silver Chloride Nanoparticles (AgCl-NPs) from Extreme Halophiles and Evaluation of Their Biological Applications

The biosynthesis of nanoparticles (NPs) has gained an overwhelming interest due to their biological applications. However, NPs synthesis by pigmented extreme halophiles remains underexplored. The NPs synthesis using pigmented halophiles is inexpensive and less toxic than other processes. In this study, pigmented halophilic microorganisms (n = 77) were screened to synthesize silver chloride nanoparticles (AgCl-NPs) with silver nitrate as metal precursors, and their biological applications were assessed. The synthesis of AgCl-NPs was possible using the crude extract from cellular lysis (CECL) of six extreme halophiles. Two of the AgCl-NPs viz. AK2-NPs and MY6-NPs synthesized by the CECL of Haloferax alexandrinus RK_AK2 and Haloferax lucentense RK_MY6, respectively, exhibited antimicrobial, antioxidative, and anti-inflammatory activities. The surface plasmon resonance of the AgCl-NPs was determined with UV spectroscopy. XRD analysis of AK2-NPs and MY6-NPs confirmed the presence of silver in the form of chlorargyrite (silver chloride) having a cubic structure. The crystallite size of AK2-NPs and MY6-NPs, estimated with the Scherrer formula, was 115.81 nm and 137.50 nm. FTIR analysis verified the presence of diverse functional groups. Dynamic light-scattering analysis confirmed that the average size distribution of NPs was 71.02 nm and 117.36 nm for AK2-NPs and MY6-NPs, respectively, with monodisperse nature. The functional group in 1623-1641 cm^-1 indicated the presence of protein β-sheet structure and shifting of amino and hydroxyl groups from the pigmented CECL, which helps in capping and stabilizing nanoparticles. The study provides evidence that CECL of Haloferax species can rapidly synthesize NPs with unique characteristics and biological applications.

Structural Rearrangements of Carbonic Anhydrase Entrapped in Sol-Gel Magnetite Determined by ATR–FTIR Spectroscopy

Enzymatically active nanocomposites are a perspective class of bioactive materials that finds their application in numerous fields of science and technology ranging from biosensors and therapeutic agents to industrial catalysts. Key properties of such systems are their stability and activity under various conditions, the problems that are addressed in any research devoted to this class of materials. Understanding the principles that govern these properties is critical to the development of the field, especially when it comes to a new class of bioactive systems. Recently, a new class of enzymatically doped magnetite-based sol-gel systems emerged and paved the way for a variety of potent bioactive magnetic materials with improved thermal stability. Such systems already showed themself as perspective industrial and therapeutic agents, but are still under intense investigation and many aspects are still unclear. Here we made a first attempt to describe the interaction of biomolecules with magnetite-based sol-gel materials and to investigate facets of protein structure rearrangements occurring within the pores of magnetite sol-gel matrix using ATR Fourier-transform infrared spectroscopy.

Evaluation of Proton-Induced Biomolecular Changes in MCF-10A Breast Cells by Means of FT-IR Microspectroscopy

Radiotherapy (RT) with accelerated beams of charged particles (protons and carbon ions), also known as hadrontherapy, is a treatment modality that is increasingly being adopted thanks to the several benefits that it grants compared to conventional radiotherapy (CRT) treatments performed by means of high-energy photons/electrons. Hence, information about the biomolecular effects in exposed cells caused by such particles is needed to better realize the underlying radiobiological mechanisms and to improve this therapeutic strategy. To this end, Fourier transform infrared microspectroscopy (μ-FT-IR) can be usefully employed, in addition to long-established radiobiological techniques, since it is currently considered a helpful tool for examining radiation-induced cellular changes. In the present study, MCF-10A breast cells were chosen to evaluate the effects of proton exposure using μ-FT-IR. They were exposed to different proton doses and fixed at various times after exposure to evaluate direct effects due to proton exposure and the kinetics of DNA damage repair. Irradiated and control cells were examined in transflection mode using low-e substrates that have been recently demonstrated to offer a fast and direct way to examine proton-exposed cells. The acquired spectra were analyzed using a deconvolution procedure and a ratiometric approach, both of which showed the different contributions of DNA, protein, lipid, and carbohydrate cell components. These changes were particularly significant for cells fixed 48 and 72 h after exposure. Lipid changes were related to variations in membrane fluidity, and evidence of DNA damage was highlighted. The analysis of the Amide III band also indicated changes that could be related to different enzyme contributions in DNA repair.

Modeling and Optimization of β-Galactosidase Entrapping in Polydimethylsiloxane-Modified Silica Composites

Protein entrapment has multiple applications in enzymatic hydrolysis, drug delivery, etc. Here, we report the studies that successfully utilized the Box–Behnken design to model and optimize the parameters of β-galactosidase entrapment in sol–gel-derived silica composites. We have also demonstrated the influence of polymer–polydimethylsiloxane as a composite modifying agent on the activity of entrapped enzymes. We have determined how different sol-gel process parameters influence the activity of entrapped enzymes. The highest impact on β-galactosidase activity was exerted by the water:tetramethoxysilane ratio, followed by polydimethylsiloxane content. Optimized synthesis parameters have been utilized to obtain a composite with maximum β-galactosidase activity. Performed porosity studies have shown that the addition of polydimethylsiloxane increased the pore diameter. Microscopy studies demonstrated that polydimethylsiloxane-modified composites are softer and less rough. Studies of β-galactosidase activity using the o-NPG test showed statistically significant shifts in the enzyme temperature and pH profiles compared to the soluble form. An improvement in the reusability of the enzyme and a significant increase in the thermal stability was also observed. When lactose was used, a strong correlation was observed between the substrate concentration and the type of the catalyzed reaction. Moreover, we have demonstrated that the yields and rates of both lactose hydrolysis and galactooligosaccharides formation were correlated with reaction temperature and with the presence of polydimethylsiloxane. All these findings provide the opportunity for industrial use of optimized PDMS-modified silica composites in lactose elimination from dairy products, e.g., milk or whey.

Loading of Polydimethylsiloxane with a Human ApoB-Derived Antimicrobial Peptide to Prevent Bacterial Infections

Background: medical device-induced infections affect millions of lives worldwide and innovative preventive strategies are urgently required. Antimicrobial peptides (AMPs) appear as ideal candidates to efficiently functionalize medical devices surfaces and prevent bacterial infections. In this scenario, here, we produced antimicrobial polydimethylsiloxane (PDMS) by loading this polymer with an antimicrobial peptide identified in human apolipoprotein B, r(P)ApoB_L^Pro. Methods: once obtained loaded PDMS, its structure, anti-infective properties, ability to release the peptide, stability, and biocompatibility were evaluated by FTIR spectroscopy, water contact angle measurements, broth microdilution method, time-killing kinetic assays, quartz crystal microbalance analyses, MTT assays, and scanning electron microscopy analyses. Results: PDMS was loaded with r(P)ApoB_L^Pro peptide which was found to be present not only in the bulk matrix of the polymer but also on its surface. ApoB-derived peptide was found to retain its antimicrobial properties once loaded into PDMS and the antimicrobial material was found to be stable upon storage at 4 °C for a prolonged time interval. A gradual and significant release (70% of the total amount) of the peptide from PDMS was also demonstrated upon 400 min incubation and the antimicrobial material was found to be endowed with anti-adhesive properties and with the ability to prevent biofilm attachment. Furthermore, PDMS loaded with r(P)ApoB_L^Pro peptide was found not to affect the viability of eukaryotic cells. Conclusions: an easy procedure to functionalize PDMS with r(P)ApoB_L^Pro peptide has been here developed and the obtained functionalized material has been found to be stable, antimicrobial, and biocompatible.

Glucose-sensitive delivery of tannic acid by a photo-crosslinked chitosan hydrogel film for antibacterial and anti-inflammatory therapy

A glucose-sensitive antibacterial and anti-inflammatory hydrogel film with controlled release of tannic acid (TA) was synthesized using chitosan (CS). Specifically, the photo-crosslinked CS hydrogel was first obtained and then immersed in TA solution to generate composite hydrogel film with enhanced mechanical properties. Subsequently, N-hydroxysuccinimide/1-ethyl-3-(3-dimethylaminopropyl) carbodiimide based coupling chemistry was used to covalently crosslink glucose oxidase (GOx) to CS to obtain glucose sensitivity. The physicochemical properties, including chemical composition, enzyme-related characteristics, glucose responsiveness, and mechanical strength, were thoroughly investigated, followed by the cytotoxicity, antibacterial and anti-inflammatory tests. The results showed that the GOx immobilized on the film surface by covalent bonding gave better stability than those that were physically adsorbed. In addition, it could quickly and correspondingly modify its inner pore structure in response to the glucose stimulus and then control the loaded TA release. Meanwhile, the TA addition could enhance the film's mechanical properties. The composite hydrogel film demonstrated adequate biocompatibility and can inhibit NO, IL-6, and TNF-α production in stimulated macrophages, as well as Porphyromonas gingivalis growth, demonstrating effective antibacterial and anti-inflammatory activity.

Fully integrated flexible biosensor for wearable continuous glucose monitoring

Continuous physiological monitoring is a promising alternative to current chronic disease management for obtaining big data sets to help individualized therapy. Here, we present a continuous glucose monitoring platform consisting of a screen-printed electrochemical biosensor and a fully integrated wireless electrochemical analysis system. A biocompatible conjugated polymer (poly (N-phenylglycine)) was employed as the support material for enzyme immobilization. Specifically, a polyurethane outer layer was decorated onto the working electrode of the biosensor to construct a diffusion limiting membrane and improve the linear range of the glucose sensor. We optimized the fabricated glucose sensor so that it achieves a linear range of 1-30 mM and a sensitivity of 12.69 μA mM^-1·cm^-2 in vitro. The long-term stability is up to 30 days by storing in PBS solution at 4°C. The overall system design was very small (0.8 × 1.8 cm) and consisted of a signal conditioning part, a programmable electrochemical chip, and a wireless connection using Bluetooth Low Energy with a smartphone. Finally, we carried out biocompatibility tests and animal experiments to demonstrate the device can successfully monitor blood glucose in vivo.

Application of magnetic field (MF) as an effective method to improve the activity of immobilized Candida antarctica lipase B (CALB)

The process of immobilized enzyme and the change mechanism of enzyme in magnetic field.

Facile immobilization of glucose oxidase with Cu3(PO4)2·3H2O for glucose biosensing via smartphone

A smartphone-based colorimetric platform for facile glucose detection was constructed below. First, glucose oxidase-Cu₃(PO₄)₂·3H₂O hybrid microflowers (GOx-HMFs) were facilely synthesized via biomineralization, which can react with glucose and 3,3',5,5'-tetramethylbenzidine to generate colored product. Next, the color information of product was real-time collected and processed via smartphone to realize accurate glucose detection. The as-constructed colorimetric platform based on GOx-HMFs and smartphone had wide linear range, high sensitivity and good selectivity for glucose detection, moreover, the detection process was convenient and efficient, which provided a new idea for glucose detection.

First Identification of the Effects of Low Frequency Electromagnetic Field on the Micromolecular Changes in Adipose Tissue-Derived Mesenchymal Stem Cells by Fourier Transform Infrared Spectroscopy

Purpose:

In this study, we hypothesize that exposure of adipose tissue-mesenchymal stem cells (AT-MSCs) to electromagnetic field (EMF) may impact adipose stem cells' micromolecular structure (analyzed using Fourier transform infrared spectroscopy [FTIR]).

Materials and Methods:

The AT-MSCs were exposed to continuous vertically applied sinusoidal EMF with a frequency of 50 Hz and a flux density of 1.5 mT for 24, 48, and 72 h. After an appropriate time (24, 48, 72 h) cells were washed with PBS, scrubbed, and immediately taken into FTIR analyses.

Results:

EMFs affect AT-MSCs. The greatest differences were in the range of nucleic acids and proteins in the fingerprint region which occurred after 24 and 48 h of EMF exposure. However, in the case of 72 h of EMF exposure, no significant differences were noticed in the FTIR spectra towards the control.

Conclusions:

FTIR spectra show differences between samples under the influence of EMF before they will be manifested at the morphological level. The largest differences in the range of nucleic acids and proteins in the fingerprint region occurred at 24 and 48 h of EMF exposure. That means it was during the first 48 h after EMF exposure a great number of dynamic changes occurred. However, in the case of AT-MSCs in 72 h EMF and 72 h control, no significant differences were noted in the FTIR spectra, which means that the chemical composition in these two cases is similar. EMF is not neutral for stem cells, especially in the in the first hours of interaction (24 h, 48 h).

Biodiesel production from alternative raw materials using a heterogeneous low ordered biosilicified enzyme as biocatalyst

BACKGROUND

Cumulative reported evidence has indicated that renewable feedstocks are a promising alternative source to fossil platforms for the production of fuels and chemicals. In that regard, the development of new, highly active, selective, and easy to recover and reuse catalysts for biomass conversions is urgently needed. The combination of enzymatic and inorganic heterogeneous catalysis generates an unprecedented platform that combines the advantages of both, the catalytic efficiency and selectivity of enzymes with the ordered structure, high porosity, mechanical, thermal and chemical resistance of mesoporous materials to obtain enzymatic heterogeneous catalysts. Enzymatic mineralization with an organic silicon precursor (biosilicification) is a promising and emerging approach for the generation of solid hybrid biocatalysts with exceptional stability under severe use conditions. Herein, we assessed the putative advantages of the biosilicification technology for developing an improved efficient and stable biocatalyst for sustainable biofuel production.

RESULTS

A series of solid enzymatic catalysts denominated LOBE (low ordered biosilicified enzyme) were synthesized from Pseudomonas fluorescens lipase and tetraethyl orthosilicate. The microscopic structure and physicochemical properties characterization revealed that the enzyme formed aggregates that were contained in the heart of silicon-covered micelles, providing active sites with the ability to process different raw materials (commercial sunflower and soybean oils, Jatropha excisa oil, waste frying oil, acid oil from soybean soapstock, and pork fat) to produce first- and second-generation biodiesel. Ester content ranged from 81 to 93% wt depending on the raw material used for biodiesel synthesis.

CONCLUSIONS

A heterogeneous enzymatic biocatalyst, LOBE4, for efficient biodiesel production was successfully developed in a single-step synthesis reaction using biosilicification technology. LOBE4 showed to be highly efficient in converting refined, non-edible and residual oils (with high water and free fatty acid contents) and ethanol into biodiesel. Thus, LOBE4 emerges as a promising tool to produce second-generation biofuels, with significant implications for establishing a circular economy and reducing the carbon footprint.

FT-IR Transflection Micro-Spectroscopy Study on Normal Human Breast Cells after Exposure to a Proton Beam

Fourier transform infrared micro-spectroscopy (μ-FT-IR) is nowadays considered a valuable tool for investigating the changes occurring in human cells after exposure to ionizing radiation. Recently, considerable attention has been devoted to the use of this optical technique in the study of cells exposed to proton beams, that are being increasingly adopted in cancer therapy. Different experimental configurations are used for proton irradiation and subsequent spectra acquisition. To facilitate the use of μ-FT-IR, it may be useful to investigate new experimental approaches capable of speeding up and simplifying the irradiation and measurements phases. Here, we propose the use of low-e-substrates slides for cell culture, allowing the irradiation and spectra acquisition in transflection mode in a fast and direct way. In recent years, there has been a wide debate about the validity of these supports, but many researchers agree that the artifacts due to the presence of the electromagnetic standing wave effects are negligible in many practical cases. We investigated human normal breast cells (MCF-10 cell line) fixed immediately after the irradiation with graded proton radiation doses (0, 0.5, 2, and 4 Gy). The spectra obtained in transflection geometry showed characteristics very similar to those present in the spectra acquired in transmission geometry and confirm the validity of the chosen approach. The analysis of spectra indicates the occurrence of significant changes in DNA and lipids components of cells. Modifications in protein secondary structure are also evidenced.

An FTIR Microspectroscopy Ratiometric Approach for Monitoring X-ray Irradiation Effects on SH-SY5Y Human Neuroblastoma Cells

The ability of Fourier transform infrared (FTIR) spectroscopy in analyzing cells at a molecular level was exploited for investigating the biochemical changes induced in protein, nucleic acid, lipid, and carbohydrate content of cells after irradiation by graded X-ray doses. Infrared spectra from in vitro SH-SY5Y neuroblastoma cells following exposure to X-rays (0, 2, 4, 6, 8, 10 Gy) were analyzed using a ratiometric approach by evaluating the ratios between the absorbance of significant peaks. The spectroscopic investigation was performed on cells fixed immediately (t0 cells) and 24 h (t24 cells) after irradiation to study both the initial radiation-induced damage and the effect of the ensuing cellular repair processes. The analysis of infrared spectra allowed us to detect changes in proteins, lipids, and nucleic acids attributable to X-ray exposure. The ratiometric analysis was able to quantify changes for the protein, lipid, and DNA components and to suggest the occurrence of apoptosis processes. The ratiometric study of Amide I band indicated also that the secondary structure of proteins was significantly modified. The comparison between the results from t0 and t24 cells indicated the occurrence of cellular recovery processes. The adopted approach can provide a very direct way to monitor changes for specific cellular components and can represent a valuable tool for developing innovative strategies to monitor cancer radiotherapy outcome.

Surfaces based on amino acid functionalized polyelectrolyte films towards active surfaces for enzyme immobilization

Surface based on polyelectrolytes functionalized with amino acids onto amino-terminated solid surfaces of silicon wafers was prepared, with the purpose of evaluate the chemical functionality of the polyelectrolyte films in adsorption and catalytic activity of an enzyme. In this work, the adsorption of the enzyme glucose 6-phosphate dehydrogenase from Leuconostoc mesenteroides (LmG6PD) was studied as model. The polyelectrolytes were obtained from poly (maleic anhydride-alt-vinylpyrrolidone) [poly(MA-alt-VP)] and functionalized with amino acids of different hydropathy index: glutamine (Gln), tyrosine (Tyr) and methionine (Met). The polyelectrolytes were adsorbed onto the amino-terminated silicon wafer at pH 3.5 and 4.5 and at low and high ionic strength. At low ionic strength and pH 3.5, the largest quantity of adsorbed polyelectrolyte was on the films containing glutamine moiety as the most hydrophilic amino acid in the side chain of polymer chain (5.88 mg/m²), whereas at high ionic strength and pH 4.5, the lowest quantity was in films containing tyrosine moiety in the side chain (1.88 mg/m²). The films were characterized by ellipsometry, contact angle measurements and atomic force microscopy (AFM). The polyelectrolyte films showed a moderate degree of hydrophobicity, the methionine derivative being the most hydrophobic film. With the aim of evaluate the effect of the amino acid moieties on the ability of the surface to adsorb enzymes, we study the activity of the enzyme on these surfaces. We observed that the polarity of the side chain of the amino acid in the polyelectrolyte affected the quantity of LmG6PD adsorbed, as well as its specific activity, showing that films prepared from poly(MA-alt-VP) functionalized with Met provide the best enzymatic performance. The results obtained demonstrated that the surfaces prepared from polyelectrolytes functionalized with amino acids could be an attractive and simple platform for the immobilization of enzymes, which could be of interest for biocatalysis applications.

Preparation of mesoporous silica microparticles by sol-gel/emulsion route for protein release

Encapsulation of therapeutic proteins into particles from appropriate material can improve both stability and delivery of the drugs, and the obtained particles can serve as a platform for development of their new oral formulations. The main goal of this work was development of sol-gel/emulsion method for preparation of silica microcapsules capable of controlled release of encapsulated protein without loss of its native structure. For this purpose, the reported in literature direct sol-gel/W/O/W emulsion method of protein encapsulation was used with some modifications, because the original method did not allow to prepare silica microcapsules capable for protein release. The particles were synthesized using sodium silicate and tetraethoxysilane as silica precursors and different compositions of oil phase. In vitro kinetics of bovine serum albumin (BSA) release in buffer (pH 7.4) was studied by Fourier transform infrared (FTIR) and fluorescence spectrometry, respectively. Structural state of encapsulated BSA and after release was evaluated. It was found that the synthesis conditions influenced substantially the porous structure of the unloaded silica particles, release properties of the BSA-loaded silica particles and structural state of the encapsulated and released protein. The modified synthesis conditions made it possible to obtain the silica particles capable of controlled release of the protein during a week without loss of the protein native structure.

Study of SH-SY5Y Cancer Cell Response to Treatment with Polyphenol Extracts Using FT-IR Spectroscopy

Plant polyphenols are important components of human diet and a number of them are considered to possess chemo-preventive and therapeutic properties against cancer. They are recognized as naturally occurring antioxidants, but also as pro-oxidant, pro-apoptotic, or chromosomal aberrations inducers, depending on their concentration and/or the stage of cell-cycle of the cells with which they interact. For these reasons, particular interest is devoted to knowing the total effects of polyphenols on the cell cycle and metabolism. Fourier-Transform Infrared (FT-IR) spectroscopy thanks to its ability in analyzing cells at a molecular level can be particularly useful in investigating the biochemical changes induced in protein, nucleic acid, lipid, and carbohydrate content of cells by means of polyphenols administration. Spectroscopic analysis was performed on in vitro human SH-SY5Y neuroblastoma cells that were exposed to different doses of a cherry derived polyphenol extract. The infrared spectra that were obtained from unexposed and exposed cells show significant differences that can be helpful in order to understand the cells-polyphenols interaction.

Investigation for terminal reflection optical fiber SPR glucose sensor and glucose sensitive membrane with immobilized GODs

Glucose sensitive membrane (GSM) consists of glucose oxidases (GODs) and matrix material (for example, polyacrylamide gel). In this paper, we have investigated the optical property and adsorption isotherms of a GSM based on a terminal reflection optical fiber SPR sensor. Firstly, we reported the fabrication of one kind of GSM which was made of immobilized GODs on SiO₂ nanoparticles and PAM gel. Then, we investigated the effects of GSM thickness, GOD content, solution pH and ambient temperature on the reflected spectrum of sensor, and the optimum parameters of the sensor, such as, GSM thickness of 12 times pulling, 4 mg/mL of GOD content in GSM, 7.0 of solution pH and 40 °C of measuring temperature were obtained. Thirdly, we measured the wavelength shifts of the optimized SPR sensor in the solutions with different glucose concentrations. As the glucose concentration increases from 0 to 80 mg/dL, the resonance wavelength decreases approximately linearly and the corresponding sensitivity is about 0.14 nm/(mg/dL). Finally, we investigated the RI of the GSM, the concentration of glucose into GSM and the adsorption isotherm of GSM by the combination of SPR experiment data, theoretical simulation and Gladstone-Dale mixing rule. As the glucose concentration is in the region of [0, 80] mg/dL, the adsorption of GSM for glucose can be explained by the Freundlich isotherm model. As the glucose concentration is in the region of [120, 500] mg/dL, the Langmuir isotherm model is more suitable to describe the adsorption process of GSM for glucose.

Immobilization of Amano Lipase A onto Stöber silica surface: process characterization and kinetic studies

The immobilization of Amano Lipase A from Aspergillus niger by adsorption onto Stöber silica matrix obtained by sol-gel method was studied. The effectiveness of the enzyme immobilization and thus the usefulness of the method was demonstrated by a number of physicochemical analysis techniques including Fourier Transform Infrared Spectroscopy (FT-IR), elemental analysis (EA), thermogravimetric analysis (TG), porous structure of the support and the products after immobilization from the enzyme solution with various concentration at different times. The analysis of the process’ kinetics allowed the determination of the sorption parameters of the support and optimization of the process. The optimum initial concentration of the enzyme solution was found to be 5 mg mL-1, while the optimum time of the immobilization was 120 minutes. These values of the variable parameters of the process were obtained by as ensuring the immobilization of the largest possible amount of the biocatalyst at

Time-resolved flavin adenine dinucleotide fluorescence study of the interaction between immobilized glucose oxidase and glucose

Time-resolved fluorescence experiments have shown that flavin adenine dinucleotide (FAD) fluorescence emission of sol-gel immobilized glucose oxidase (GOD) exhibits a three-exponential decaying behaviour characterized by long- (about 2.0-3.0 ns), intermediate- (about 300 ps) and short- (less than 10 ps) lifetime, each one being characteristic of a peculiar conformational state of the FAD structure. In the present work time-resolved fluorescence is used to monitor FAD signals in the time interval immediately following the addition of glucose at various concentrations in order to detect the conformational changes occurring during the interaction between sol-gel immobilized GOD and glucose. The analysis of time-dependent fluorescence emission signal has shown that the FAD conformational state changes during the process from a configuration with a prevalence of the state characterized by the long lifetime to a configuration with increased contribution from the process with the intermediate lifetime. The time needed to complete this configuration change decreases with the concentration of added glucose. The results here reported indicate that time-resoled fluorescence can be extremely useful for a better understanding of solid phase biocatalysis that is particularly important in light of their clinical and biotechnological applications.