Synthesis, structural analysis, mechanical, antibacterial and hemolytic activity of Mg²⁺ and Cu²⁺ co-substitutions in β-Ca₃(PO₄)₂

Assessment of Quality in Antimicrobial Calcium Phosphate Research (AQUACAP): A Systematic Review

The effectiveness of antimicrobial ion-substituted calcium phosphate biomaterials has been investigated in numerous studies, but reporting guidelines and quality checklists are missing. A novel quality checklist was created for assessing reporting and methodological quality by experts of relevant disciplines. The checklist consisted of 20 items for reporting quality (maximum score 32) and 11 for methodological quality (maximum score 18). The checklist was subsequently implemented to assess the reporting and methodological quality of 58 studies in this field. Possible associations between study quality, year of publication and citations were investigated, and items for improvement were identified. Main items for improvement in reporting quality (average score 18/32) were reporting variability and statistics of data, reporting rationales for study design and the clinical relevance of the outcomes. Methodological quality (average score 11/18) could be improved by including positive control groups, using clinically relevant material formulations and including tests of the material toxicity. No association was found between study quality and year of publication. Methodological quality was associated with a higher number of annual citations. This study identifies key areas for improvement of reporting and methodological quality in the field of ion-substituted antimicrobial calcium phosphates. With these findings, the quality of future studies on antimicrobial CaP materials can be improved. The new quality checklist can also be used to improve study design for future research and enables better comparison between study outcomes.

Strontium and Copper Co-Doped Multifunctional Calcium Phosphates: Biomimetic and Antibacterial Materials for Bone Implants

β-tricalcium phosphate (β-TCP) is a promising material in regenerative traumatology for the creation of bone implants. Previously, it was established that doping the structure with certain cations can reduce the growth of bacterial activity. Recently, much attention has been paid to co-doped β-TCP, that is explained by their ability, on the one hand, to reduce cytotoxicity for cells of the human organism, on the other hand, to achieve a successful antibacterial effect. Sr, Cu-co-doped solid solutions of the composition Ca9.5-xSrxCu(PO4)7 was obtained by the method of solid-phase reactions. The Rietveld method of structural refinement revealed the presence of Sr2+ ions in four crystal sites: M1, M2, M3, and M4. The M5 site is completely occupied by Cu2+. Isomorphic substitution of Ca2+ → (Sr2+and Cu2+) expands the concentration limits of the existence of the solid solution with the β-TCP structure. No additional phases were formed up to x = 4.5 in Ca9.5-xSrxCu(PO4)7. Biocompatibility tests were performed on cell lines of human bone marrow mesenchymal stromal cells (hMSC), human fibroblasts (MRC-5) and osteoblasts (U-2OS). It was demonstrated that cytotoxicity exhibited a concentration dependence, along with an increase in osteogenesis and cell proliferation. Ca9.5-xSrxCu(PO4)7 powders showed significant inhibitory activity against pathogenic strains Escherichia coli and Staphylococcus aureus. Piezoelectric properties of Ca9.5-xSrxCu(PO4)7 were investigated. Possible ways to achieve high piezoelectric response are discussed. The combination of bioactive properties of Ca9.5-xSrxCu(PO4)7 renders them multifunctional materials suitable for bone substitutes.

Enhanced alpha-amylase inhibition activity of amine-terminated PAMAM dendrimer stabilized pure copper-doped magnesium oxide nanoparticles

The present work aims to prepare copper-doped MgO nanoparticles via a sol-gel approach and study their antidiabetic alpha-amylase inhibition activity with undoped MgO nanoparticles. The ability of G5 amine-terminated polyamidoamine (PAMAM) dendrimer for the controlled release of copper-doped MgO nanoparticles to exhibit alpha-amylase inhibition activity was also evaluated. The synthesis of MgO nanoparticles via sol-gel approach and optimization of calcination temperature and time has led to the formation of nanoparticles with different shapes (spherical, hexagonal, and rod-shaped) and a polydispersity in size ranging from 10 to 100 nm with periclase crystalline phase. The presence of copper ions in the MgO nanoparticles has altered their crystallite size, eventually modifying their size, morphology, and surface charge. The efficiency of dendrimer to stabilize spherical copper-doped MgO nanoparticles (ca. 30 %) is higher than in other samples, which was confirmed by UV-Visible, DLS, FTIR, and TEM analysis. The amylase inhibition assay emphasized that the dendrimer nanoparticles stabilization has led to the prolonged enzyme inhibition ability of MgO and copper-doped MgO nanoparticles for up to 24 h.

Antimicrobial activity of ion-substituted calcium phosphates: A systematic review

In this systematic review, the antimicrobial effect of ion-substituted calcium phosphate biomaterials was quantitatively assessed. The literature was systematically searched up to the 6th of December 2021. Study selection and data extraction was performed in duplo by two independent reviewers with a modified version of the OHAT tool for risk of bias assessment. Any differences were resolved by consensus or by a referee. A mixed effects model was used to investigate the relation between the degree of ionic substitution and bacterial reduction. Of 1016 identified studies, 108 were included in the analysis. The methodological quality of included studies ranged from 6 to 16 out of 18 (average 11.4). Selenite, copper, zinc, rubidium, gadolinium, silver and samarium had a clear antimicrobial effect, with a log reduction in bacteria count of 0.23, 1.8, 2.1, 3.6, 5.8, 7.4 and 10 per atomic% of substitution, respectively. There was considerable between-study variation, which could partially be explained by differences in material formulation, study quality and microbial strain. Future research should focus on clinically relevant scenarios in vitro and the translation to in vivo prevention of PJI.

Barium Oxide Doped Magnesium Silicate Nanopowders for Bone Fracture Healing: Preparation, Characterization, Antibacterial and In Vivo Animal Studies

Magnesium silicate (MgS) nanopowders doped with barium oxide (BaO) were prepared by sol-gel technique, which were then implanted into a fracture of a tibia bone in rats for studying enhanced in vivo bone regeneration. The produced nanopowders were characterized using X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), scanning electron microscope with energy-dispersive X-ray spectrometry (SEM-EDX) and transmission electron microscope (TEM). Mechanical and bactericidal properties of the nanopowders were also determined. Increased crystallinity, particle diameter and surface area were found to decrease after the BaO doping without any notable alterations on their chemical integrities. Moreover, elevated mechanical and antibacterial characteristics were recognized for higher BaO doping concentrations. Our animal studies demonstrated that impressive new bone tissues were formed in the fractures while the prepared samples degraded, indicating that the osteogenesis and degradability of the BaO containing MgS samples were better than the control MgS. The results of the animal study indicated that the simultaneous bone formation on magnesium biomaterial silicate and barium MgS with completed bone healing after five weeks of implantations. The findings also demonstrated that the prepared samples with good biocompatibility and degradability could enhance vascularization and osteogenesis, and they have therapeutic potential to heal bone fractures.

A Mg2+/polydopamine composite hydrogel for the acceleration of infected wound healing

Bacterial infection is a vital factor to delay the wound healing process. The antibiotics abuse leads to drug resistance of some pathogenic bacteria. Non-antibiotic-dependent multifunctional biomaterials with accelerated wound healing performance are urgently desired. Herein, we reported a composite antibacterial hydrogel PDA-PAM/Mg²⁺ that shows excellent self-healing and tissue adhesive property, and photothermal antibacterial functions for accelerating wound healing. The gel was composed of polyacrylamide (PAM), polydopamine (PDA), and magnesium (Mg²⁺) and prepared via a two-step procedure: an alkali-induced dopamine pre-polymerization and followed radical polymerization process. The composite gel shows excellent tissue adhesiveness and Mg²⁺-synergized photothermal antibacterial activity, inducing a survival rate of 5.29% for S. aureus and 7.06% for E. coli after near infrared light irradiation. The composite hydrogel further demonstrated efficient bacteria inhibition, enhanced wound healing and collagen deposition in a full-thickness skin defect rat model. Together, the PDA-PAM/Mg²⁺ hydrogel presents an excellent wound dressing with excellent tissue adhesion, wound healing, and antibacterial functions.

•

A self-healing multifunctional hydrogel with photothermal antibacterial properties was developed and applied in wound healing.

•

The hydrogel exhibited enhanced self-healing and adhesion properties.

•

The hydrogel exhibited excellent photothermal effect and photothermal stability and repeatability.

•

The hydrogel could accelerate wound healing by promoting cell proliferation and collagen deposition.

Evaluation of the antibacterial properties and in-vitro cell compatibilities of doped copper oxide/hydroxyapatite composites

Mg, Zn and Ce-doped CuO/HA composites were prepared by a two-step sol-gel and hydrothermal process. SEM images showed a spherical appearance of HA and a needle-like morphology for doped CuO. XRD patterns revealed that all doped CuO/HA composites exhibited a hexagonal crystal structure of HA and a monoclinic crystal structure of CuO with no impurities. ICP analysis indicated that with the increase of loading amount of doped CuO, the concentrations of Cu²⁺ ions and doping ions released from composites increased. Moreover, CuO/HA composites exhibit improved antibacterial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as compared with HA. When the loading amount of doped CuO in composites increased to 15 wt%, the composites exhibited the best antibacterial activity and complete bacterial growth inhibition effect. Furthermore, the CCK-8 assay revealed that the doped CuO/HA composites are noncytotoxic and can promote the proliferation of osteosarcoma cells. This work highlights the potential of the doped CuO/HA composites with significant antibacterial activity, bioactivity and cell compatibility for potential biomedical applications in dental implants and bone regeneration.

Enhanced Photocatalytic and Antibacterial Activities of K2Ti6O13 Nanowires Induced by Copper Doping

Cu-doped K2Ti6O13 (Cu–KTO) nanowires were prepared using a combination of sol–gel and hydrothermal methods to improve the photocatalytic and antibacterial performance of K2Ti6O13 (KTO) nanowires. The Cu–KTO nanowires maintained the monoclinic structure of KTO. The Cu2+ ions could enter into the lattice of KTO by substituting for certain Ti4+ ions and cause the formation of defects and oxygen vacancies. The UV–Visible absorption spectra showed that after Cu doping, the absorption edge of KTO moved to the visible region, indicating that the band gap decreased and the ability to absorb visible light was acquired. The photocatalytic properties of the Cu–KTO nanowires with different doping amounts were assessed by simulating the photodegradation of rhodamine B (RhB) under simulated sunlight irradiation. The 1.0 mol% Cu–KTO nanowires showed the best photocatalytic performance, and 91% of RhB was decomposed by these nanowires (the catalyst dose was only 0.3 g/L) within 5 h. The performance of the Cu–KTO nanowires was much better than that of the KTO nanowires. The Cu–KTO nanowires also showed high antibacterial activity for Escherichia coli (ATCC 25922) of up to 99.9%, which was higher than that of the pure KTO samples. Results proved that Cu doping is an effective means to develop multifunctional KTO nanomaterials. It can be used to degrade organic pollutants and remove harmful bacteria simultaneously in water environments.

Preparation and Characterization of Self-Assembled Poly(l-Lactide) on the Surface of β-Tricalcium Diphosphate(V) for Bone Tissue Theranostics

This work was aimed to obtain and characterize the well-defined biocomposites based on β-tricalcium diphosphate(V) (β-TCP) co-doped with Ce³⁺ and Pr³⁺ ions modified by poly(l-lactide) (PLLA) with precise tailored chain length and different phosphate to polymer ratio. The composites as well as β-tricalcium diphosphate(V) were spectroscopically characterized using emission spectroscopy and luminescence kinetics. Morphological and structural properties were studied using X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The self-assembled poly(l-lactide) in a shape of rose flower has been successfully polymerized on the surface of the β-tricalcium diphosphate(V) nanocrystals. The studied materials were evaluated in vitro including cytotoxicity (MTT assay) and hemolysis tests. The obtained results suggested that the studied materials may find potential application in tissue engineering.

Ionic Substitutions in Non-Apatitic Calcium Phosphates

Calcium phosphate materials (CaPs) are similar to inorganic part of human mineralized tissues (i.e., bone, enamel, and dentin). Owing to their high biocompatibility, CaPs, mainly hydroxyapatite (HA), have been investigated for their use in various medical applications. One of the most widely used ways to improve the biological and physicochemical properties of HA is ionic substitution with trace ions. Recent developments in bioceramics have already demonstrated that introducing foreign ions is also possible in other CaPs, such as tricalcium phosphates (amorphous as well as α and β crystalline forms) and brushite. The purpose of this paper is to review recent achievements in the field of non-apatitic CaPs substituted with various ions. Particular attention will be focused on tricalcium phosphates (TCP) and "additives" such as magnesium, zinc, strontium, and silicate ions, all of which have been widely investigated thanks to their important biological role. This review also highlights some of the potential biomedical applications of non-apatitic substituted CaPs.

Iron doped β-Tricalcium phosphate: Synthesis, characterization, hyperthermia effect, biocompatibility and mechanical evaluation

The ability of β-Tricalcium phosphate [β-TCP, β-Ca₃(PO₄)₂] to host iron at its structural lattice and its associated magnetic susceptibility, hyperthermia effect, biocompatibility and mechanical characteristics is investigated. The studies revealed the ability of β-Ca₃(PO₄)₂ to host 5.02mol% of Fe³⁺ at its Ca²⁺(5) site. Excess Fe³⁺ additions led to the formation of trigonal Ca₉Fe(PO₄)₇ and moreover a minor amount of CaFe₃(PO₄)₃O crystallization was also observed. A gradual increment in the iron content at β-Ca₃(PO₄)₂ results in the simultaneous effect of pronounced hyperthermia effect and mechanical stability. However, the presence of CaFe₃(PO₄)₃O contributes for the reduced hyperthermia effect and mechanical stability of iron substituted β-Ca₃(PO₄)₂. Haemolytic tests, cytotoxicity tests and ALP gene expression analysis confirmed the biocompatibility of the investigated systems.

Preparation of up-converting nano-biphasic calcium phosphate

The nano-biphasic calcium phosphate co-doped with 1 mol% Er³⁺ and 5 mol% Yb³⁺ ions was prepared using modified Pechini's technique.

Deposition, structure, physical and invitro characteristics of Ag-doped β-Ca3(PO4)2/chitosan hybrid composite coatings on Titanium metal

Pure and five silver-doped (0-5Ag) β-tricalcium phosphate [β-TCP, β-Ca3(PO4)2]/chitosan composite coatings were deposited on Titanium (Ti) substrates and their properties that are relevant for applications in hard tissue replacements were assessed. Silver, β-TCP and chitosan were combined to profit from their salient and complementary antibacterial and biocompatible features.The β-Ca3(PO4)2 powders were synthesized by co-precipitation. The characterization results confirmed the Ag(+) occupancy at the crystal lattice of β-Ca3(PO4)2. The Ag-dopedβ-Ca3(PO4)2/chitosan composite coatings deposited by electrophoresis showed good antibacterial activity and exhibited negative cytotoxic effects towards the human osteosarcoma cell line MG-63. The morphology of the coatings was observed by SEM and their efficiency against corrosion of metallic substrates was determined through potentiodynamic polarization tests.