Bacterial cellulose and bacterial cellulose-vaccarin membranes for wound healing

Cellulose-Based Nanofibers Infused with Biotherapeutics for Enhanced Wound-Healing Applications

Nanofibers fabricated from various materials such as polymers, carbon, and semiconductors have been widely used for wound healing and tissue engineering applications due to their excellent nontoxic, biocompatible, and biodegradable properties. Nanofibers with a diameter in the nanometer range possess a larger surface area per unit mass permitting easier addition of surface functionalities and release of biotherapeutics incorporated compared with conventional polymeric microfibers. Henceforth, nanofibers are a choice for fabricating scaffolds for the management of wound healing. Nanofibrous scaffolds have emerged as a promising method for fabricating wound dressings since they mimic the fibrous dermal extracellular matrix milieu that offers structural support for wound healing and functional signals for guiding tissue regeneration. Cellulose-based nanofibers have gained significant attention among researchers in the fabrication of on-site biodegradable scaffolds fortified with biotherapeutics in the management of wound healing. Cellulose is a linear, stereoregular insoluble polymer built from repeated units of d-glucopyranose linked with 1,4-β glycoside bonds with a complex and multilevel supramolecular architecture. Cellulose is a choice and has been used by various researchers due to its solubility in many solvents and its capacity for self-assembly into nanofibers, facilitating the mimicry of the natural extracellular matrix fibrous architecture and promoting substantial water retention. It is also abundant and demonstrates low immunogenicity in humans due to its nonanimal origins. To this end, cellulose-based nanofibers have been studied for protein delivery, antibacterial activity, and biosensor applications, among others. Taken together, this review delves into an update on cellulose-based nanofibers fused with bioactive compounds that have not been explored considerably in the past few years.

Current Paradigms and Future Challenges in Harnessing Nanocellulose for Advanced Applications in Tissue Engineering: A Critical State-of-the-Art Review for Biomedicine

Nanocellulose-based biomaterials are at the forefront of biomedicine, presenting innovative solutions to longstanding challenges in tissue engineering and wound repair. These advanced materials demonstrate enhanced mechanical properties and improved biocompatibility while allowing for precise tuning of drug release profiles. Recent progress in the design, fabrication, and characterization of these biomaterials underscores their transformative potential in biomedicine. Researchers are employing strategic methodologies to investigate and characterize the structure and functionality of nanocellulose in tissue engineering and wound repair. In tissue engineering, nanocellulose-based scaffolds offer transformative opportunities to replicate the complexities of native tissues, facilitating the study of drug effects on the metabolism, vascularization, and cellular behavior in engineered liver, adipose, and tumor models. Concurrently, nanocellulose has gained recognition as an advanced wound dressing material, leveraging its ability to deliver therapeutic agents via precise topical, transdermal, and systemic pathways while simultaneously promoting cellular proliferation and tissue regeneration. The inherent transparency of nanocellulose provides a unique advantage, enabling real-time monitoring of wound healing progress. Despite these advancements, significant challenges remain in the large-scale production, reproducibility, and commercial viability of nanocellulose-based biomaterials. This review not only underscores these hurdles but also outlines strategic directions for future research, including the need for bioengineering of nanocellulose-based wound dressings with scalable production and the incorporation of novel functionalities for clinical translation. By addressing these key challenges, nanocellulose has the potential to redefine biomedical material design and offer transformative solutions for unmet clinical needs in tissue engineering and beyond.

Novel cinnamon essential oil-bacterial cellulose microcapsules for enhanced preservation of prefabricated meat

Bacterial cellulose, a naturally porous nanomaterial, shows significant potential in encapsulation and sustained-release applications. However, effective methods to construct bacterial cellulose microcapsules (BCM) are lacking, resulting in low embedding rates and poor slow-release effects. This study presents a novel and efficient BCM preparation strategy using mercerization to embed cinnamon essential oil (CEO). The CEO-BCM system was evaluated for its efficacy in preserving prefabricated meat. Results demonstrated that BCM, embedded with CEO through mercerization, achieved an embedding rate of 94.9 % and an average particle size of 63.7 μm. Mercerization transformed BC crystalline into cellulose type II, densifying the BCM structure, while intermolecular hydrogen bonding between BCM and CEO enhanced the stability of CEO-BCM. Release kinetics analysis indicated that CEO release was primarily diffusion-driven (Peppas-Sahlin model) with sustained release performance up to 20 days. Additionally, CEO-BCM exhibited excellent long-term antibacterial (≥81.2 % within 20 days), antioxidant, and thermal stability, effectively extending the shelf life of prefabricated meat products from 5 to 10 days. The developed BCM construction strategy not only addresses the challenges of direct BCM preparation and the limitations in core embedding and controlled release, but also enhances the stability of the CEO. This advancement further expands the application areas of bacterial cellulose (BC), and the prepared CEO-BCM system holds significant potential for food preservation applications.

Recent advances in moisture-induced electricity generation based on wood lignocellulose: Preparation, properties, and applications

Moisture-induced electricity generation (MEG), which can directly harvest electricity from moisture, is considered as an effective strategy for alleviating the growing energy crisis. Recently, tremendous efforts have been devoted to developing MEG active materials from wood lignocellulose (WLC) due to its excellent properties including environmental friendliness, sustainability, and biodegradability. This review comprehensively summarizes the recent advances in MEG based on WLC (wood, cellulose, lignin, and woody biochar), covering its principles, preparation, performances, and applications. In detail, the basic working mechanisms of MEG are discussed, and the natural features of WLC and their significant advantages in the fabrication of MEG active materials are emphasized. Furthermore, the recent advances in WLC-based MEG for harvesting electrical energy from moisture are specifically discussed, together with their potential applications (sensors and power sources). Finally, the main challenges of current WLC-based MEG are presented, as well as the potential solutions or directions to develop highly efficient MEG from WLC.

Development of a bacterial cellulose-gelatin composite as a suitable scaffold for cardiac tissue engineering

PURPOSE

Cardiac tissue engineering is suggested as a promising approach to overcome problems associated with impaired myocardium. This is the first study to investigate the use of BC and gelatin for cardiomyocyte adhesion and growth.

METHODS

Bacterial cellulose (BC) membranes were produced by Komagataeibacter xylinus and coated or mixed with gelatin to make gelatin-coated BC (BCG) or gelatin-mixed BC (mBCG) scaffolds, respectively. BC based-scaffolds were characterized via SEM, FTIR, XRD, and AFM. Neonatal rat-ventricular cardiomyocytes (nr-vCMCs) were cultured on the scaffolds to check the capability of the composites for cardiomyocyte attachment, growth and expansion.

RESULTS

The average nanofibrils diameter in all scaffolds was suitable (~ 30-65 nm) for nr-vCMCs culture. Pore diameter (≥ 10 µm), surface roughness (~ 182 nm), elastic modulus (0.075 ± 0.015 MPa) in mBCG were in accordance with cardiomyocyte requirements, so that mBCG could better support attachment of nr-vCMCs with high concentration of gelatin, and appropriate surface roughness. Also, it could better support growth and expansion of nr-vCMCs due to submicron scale of nanofibrils and proper elasticity (~ 0.075 MPa). The viability of nr-vCMCs on BC and BCG scaffolds was very low even at day 2 of culture (~ ≤ 40%), but, mBCG could promote a metabolic active state of nr-vCMCs until day 7 (~ ≥ 50%).

CONCLUSION

According to our results, mBCG scaffold was the most suitable composite for cardiomyocyte culture, regarding its physicochemical and cell characteristics. It is suggested that improvement in mBCG stability and cell attachment features may provide a convenient scaffold for cardiac tissue engineering.

Multifunctional engineering of Mangifera indica L. peel extract-modified bacterial cellulose hydrogel: Unveiling novel strategies for enhanced heavy metal sequestration and cytotoxicity evaluation

The escalating interest in bacterial cellulose (BC) confronts a substantial obstacle due to its biologically inert properties. Hence, BC was modified with ethanolic mango peel extract (EEMP) for various industrial and medical applications of the novel nanocomposite (BC/EEMP). High-performance liquid chromatography (HPLC) delineated the phenolic composition of EEMP, revealing a repertoire of polyphenolic compounds, notably chlorogenic acid, gallic acid, catechin, and ellagic acid. EEMP exhibited broad-spectrum antimicrobial activity against Candida albicans and Staphylococcus aureus, with MIC of 0.018 mg/mL and 0.009 mg/mL, respectively. The removal mechanism of Pb2+ and Ni2+ by BC/EEMP nanocomposite membrane via SEM, EDX, FT-IR, and XRD was characterized, indicating deposition and aggregation of heavy metals with diminished porosity. Heavy metal removal optimization using the Box-Behnken design achieved maximal removal of 95.5 % and 90 % for Pb2+ and Ni2+, respectively. Moreover, BC/EEMP nanocomposite demonstrated selective dose-dependent anticancer activity toward hepatoma (HepG-2, IC50 of 208.8 μg/mL), skin carcinoma (A431, IC50 of 216.7 μg/mL), and breast carcinoma (MDA, IC50 of 197.5 μg/mL), attributed to the enhanced availability of biologically active polyphenolic compounds and physical characteristics of BC. This study underscores the remarkable potential of BC/EEMP nanocomposite for multifaceted industrial and biomedical applications, marking a pioneering contribution to the field.

Mesenchymal stem cell therapy using Pal-KTTKS-enriched carboxylated cellulose improves burn wound in rat model

Despite the great progress in developing wound dressings, delayed wound closure still remains a global challenge. Thus, developing novel wound dressings and employing advanced strategies, including tissue engineering, are urgently desired. The carboxylated cellulose was developed through the in situ synthesis method and further reinforced by incorporating pal-KTTKS to stimulate collagen synthesis and improve wound healing. The developed composites supported cell adhesion and proliferation and showed good biocompatibility. To boost wound-healing performance, adipose-derived mesenchymal stem cells (MSC) were seeded on the pal-KTTKS-enriched composites to be implanted in a rat model of burn wound healing. Healthy male rats were randomly divided into four groups and wound-healing performance of Vaseline gauze (control), carboxylated cellulose (CBC), pal-KTTKS-enriched CBC (KTTKS-CBC), and MSCs seeded on the KTTKS-CBC composites (MSC-KTTKS-CBC) were evaluated on days 3, 7, and 14 post-implantation. In each group, the designed therapeutic dressings were renewed every 5 days to increase wound-healing performance. We found that KTTKS-CBC and MSC-KTTKS-CBC composites exhibited significantly better wound healing capability, as evidenced by significantly alleviated inflammation, increased collagen deposition, improved angiogenesis, and considerably accelerated wound closure. Nevertheless, the best wound-healing performance was observed in the MSC-KTTKS-CBC groups among all four groups. This research suggests that the MSC-KTTKS-CBC composite offers a great deal of promise as a wound dressing to enhance wound regeneration and expedite wound closure in the clinic.

Utilization of the sugar fraction from Arabica coffee pulp as a carbon source for bacteria producing cellulose and cytotoxicity with human keratinocyte

Coffee pulp (CP), a by-product of coffee production, is an underutilized resource with significant potential value. CP contains monosaccharides that can serve as an ideal carbon source for bacterial cultivation, enabling the production of value-added components such as medical-grade cellulose. Herein, we extracted the sugar fraction from Arabica CP and used it as a supplement in a growing media of a bacteria cellulose (BC), Komagataeibacter nataicola. The BC was then characterized and tested for cytotoxicity. The CP sugar fraction yielded approximately 7% (w/w) and contained glucose at 4.52 mg/g extract and fructose at 7.34 mg/g extract. Supplementing the sugar fraction at different concentrations (0.1, 0.3, 0.5, 0.7, and 1 g/10 mL) in sterilized glucose yeast extract broth, the highest yield of cellulose (0.0020 g) occurred at 0.3 g/10 mL. It possessed similar physicochemical attributes to the BC using glucose, with some notable improvements in fine structure and arrangement of the functional groups. In cytotoxicity assessments on HaCaT keratinocyte cells, bacterial cellulose concentrations of 2-1000 µg/mL exhibited viability of ≥ 80%. However, higher concentrations were toxic. This research innovatively uses coffee pulp for bacterial cellulose, aligning with the principles of a bio-circular economy that focuses on sustainable biomass utilization.

Cubosome-carrying bacterial cellulose membrane as a versatile drug delivery platform

Using advanced nanotechnology membranes has opened up new possibilities in the field of biomedicine, particularly for controlled drug delivery and especially for topical use. Bacterial cellulose membranes (BCM), particularly, have gained prominence owing to their distinctive attributes, including remarkable water retention, safety, biodegradability, and tunable gas exchange. However, they are aqueous matrices and, for this reason, of limited capacity for incorporation of apolar compounds. Cubosomes are lipid nanoparticles composed of a surfactant bicontinuous reverse cubic phase, which, owing to their bicontinuous structure, can incorporate both polar and apolar compounds. Therefore, these particles present a promising avenue for encapsulating and releasing drugs and biomolecules due to their superior entrapment efficiency. In this study, we aim to extend earlier investigations using polymeric hydrogels for cubosome immobilization, now using BCMs, a more resilient biocompatible matrix. Phytantriol cubosome-loaded BCMs were prepared by three distinct protocols: ex situ incorporation into wet BCMs, ex situ incorporation by swelling of dry BCMs, and an in situ process with the growth of BCMs in a sterile medium already containing cubosomes. Our investigation revealed that these methodologies ensured that cubosomes remained integral, uniformly distributed, and thoroughly dispersed within the membrane, as confirmed using Small-Angle X-ray Scattering (SAXS) and high-resolution confocal microscopy. The effective incorporation and sustained release of diclofenac were validated across the different BCMs and compared with hyaluronic acid (HA) hydrogel in our previous studies. Furthermore, the resistance against cubosome leaching from the three BCM and HA hydrogel samples was quantitatively evaluated and contrasted. We hope that the outcomes from this research will pave the way for innovative use of this platform in the incorporation and controlled release of varied active agents, amplifying the already multifaceted applicability of BCMs.

Functionalization of bacterial cellulose: Exploring diverse applications and biomedical innovations: A review

The demand for the functionalization of additive materials based on bacterial cellulose (BC) is currently high due to their potential applications across various sectors. The preparation of BC-based additive materials typically involves two approaches: in situ and ex situ. In situ modifications entail the incorporation of additive materials, such as soluble and dispersed substances, which are non-toxic and not essential for bacterial cell growth during the production process. However, these materials can impact the yield and self-assembly of BC. In contrast, ex situ modification occurs subsequent to the formation of BC, where the additive materials are not only adsorbed on the surface but also impregnated into the BC pellicle, while the BC slurry was homogenized with other additive materials and gelling agents to create composite films using the casting method. This review will primarily focus on the in situ and ex situ functionalization of BC then sheds light on the pivotal role of functionalized BC in advancing biomedical technologies, wound healing, tissue engineering, drug delivery, bone regeneration, and biosensors.

Accelerating Full-Thickness Wound Healing with Bacterial Cellulose-Based Multilayer Composites

Materials that speed up wound healing can be of great benefit to patients and healthcare providers. One-layer dressings, however, have unsatisfactory healing efficacy since it is impossible to use materials with different properties simultaneously, and drug delivery is limited by the depth of penetration. The present study utilized a multilayer wound dressing composed of bacterial cellulose (BC) hydrogel, gelatin/alginate (Gel/Alg) hydrogel, and polycaprolactone (PCL) nanofibers loaded with ciprofloxacin (CIP) to promote the healing process in vivo. The designed dressings showed significant water absorption and sufficient water vapor transmission rate (WVTR) after one week, confirming their ability to absorb wound exudate. Within the first four hours, significant amounts of CIP were released from the drug-containing dressing. Then, between hours 4 and 24, the rate decreased and plateaued on day 9. Both positive and negative bacterial strains were inhibited by the gradual release of CIP, while fibroblasts retained their normal morphology and metabolic activity. Lastly, in vivo tests demonstrated that CIP-loaded multilayer dressings could significantly speed up full-thickness wound healing during 14 days, by reducing inflammation, stimulating re-epithelialization, and enhancing skin regeneration. Our findings indicate that multilayering BC hydrogels with drug-loaded nanofibers provide a promising way to promote wound healing by utilizing all the distinctive properties of these layers.

Eco-benign synthesis of nano‑gold chitosan-bacterial cellulose in spent ground coffee kombucha consortium: Characterization, microbiome community, and biological performance

Biomaterials that are mediocre for cell adhesion have been a concern for medical purposes. In this study, we fabricated nano‑gold chitosan-bacterial cellulose (CBC-Au) via a facile in-situ method using spent ground coffee (SGC) in a kombucha consortium. The eco-benign synthesis of monodispersed gold nanoparticles (Au NPs) in modified bacterial cellulose (BC) was successfully achieved in the presence of chitosan (CHI) and a symbiotic culture of bacteria and yeast (SCOBY). The dominant microbiome community in SGC kombucha were Lactobacillaceae and Saccharomycetes. Chitosan-bacterial cellulose (CBC) and CBC-Au affected the microfibril networks in the nano cellulose structures and decreased the porosity. The modified BC maintained its crystallinity up to 80 % after incorporating CHI and Au NPs. Depth profiling using X-ray photoelectron spectroscopy (XPS) indicated that the Au NPs were distributed in the deeper layers of the scaffolds and a limited amount on the surface of the scaffold. Aspergillus niger fungal strains validated the biodegradability of each scaffold as a decomposer. Bacteriostatically CBC-Au showed better antimicrobial activity than BC, in line with the adhesion of NIH-3T3 fibroblast cells and red blood cells (RBCs), which displayed good biocompatibility performance, indicating its potential use as a medical scaffold.

Physicochemical Characterization and Immunomodulatory Activity of Polyelectrolyte Multilayer Coatings Incorporating an Exopolysaccharide from Bifidobacterium longum

Immunoregulatory polysaccharides from probiotic bacteria have potential in biomedical engineering. Here, a negatively charged exopolysaccharide from Bifidobacterium longum with confirmed immunoregulatory activity (EPS624) was applied in multilayered polyelectrolyte coatings with positively charged chitosan. EPS624 and coatings (1, 5, and 10 layers and alginate-substituted) were characterized by the zeta potential, dynamic light scattering, size exclusion chromatography, scanning electron microscopy, and atomic force microscopy. Peripheral blood mononuclear cells (hPBMCs) and fibroblasts were exposed for 1, 3, 7, and 10 days with cytokine secretion, viability, and morphology as observations. The coatings showed an increased rugosity and exponential growth mode with an increasing number of layers. A dose/layer-dependent IL-10 response was observed in hPBMCs, which was greater than EPS624 in solution and was stable over 7 days. Fibroblast culture revealed no toxicity or metabolic change after exposure to EPS624. The EPS624 polyelectrolyte coatings are cytocompatible, have immunoregulatory properties, and may be suitable for applications in biomedical engineering.

Platelet-Rich Plasma Composite Organohydrogel with Water-Locking and Anti-Freezing to Accelerate Wound Healing

Hydrogels have gained impressive attention in biological medicine due to their excellent biosafety, softness, and varied functional components. However, conventional hydrogels have inherent defects, such as low tensile strength, weak water-locking, and poor anti-freezing. In tissue engineering, once the hydrogel loses water or freezes, it will harden the interaction interfaces and destroy the nascent granulation tissue. Herein, based on the design concept of "hard frame-soft penetration", a composite adhesive organohydrogel is fabricated by introducing bacterial cellulose and platelet-rich plasma (PRP) into a poly-N-(tris[hydroxymethyl]methyl)acrylamide (THMA)/N-acryloyl aspartic acid (AASP) hybrid gel network infiltrated with glycerol/water binary solvent. The resultant organohydrogels exhibit excellent antifreeze properties at low temperatures (-80 °C) and demonstrate stable long-term water retention (91%) in the open environment within 12 days and can adhere firmly to the tissues by the action of "hydrogen bond clusters". Additionally, the introduction of bacterial cellulose matrix endows the organohydrogel with high tensile strength similar to that of skin. In vivo, the PRP-loaded organohydrogel can release a variety of growth factors to accelerate the wound healing process through collagen deposition and angiogenesis. Altogether, this strategy will extend the life of the hydrogel in some harsh medical environments.

Andrias Davidianus Mucus-Based Bioadhesive with Enhanced Adhesion and Wound Healing Properties

The skin secretion of Andrias davidianus (SSAD) is a novel biological adhesive raw material under development. This material exhibits robust adhesion while maintaining the flexibility of the wound. It also has the potential for large-scale production, making it promising for practical application explore. Hence, in-depth research on methods to fine-tune SSAD properties is of great importance to promote its practical applications. Herein, we aim to enhance the adhesive and healing properties of SSAD by incorporating functional components. To achieve this goal, we selected 3,4-dihydroxy-l-phenylalanine and vaccarin as the functional components and mixed them with SSAD, resulting in a new bioadhesive, namely, a formulation termed "enhanced SSAD" (ESSAD). We found that the ESSAD exhibited superior adhesive properties, and its adhesive strength was improved compared with the SSAD. Moreover, ESSAD demonstrated a remarkable ability to promote wound healing. This study presents an SSAD-based bioadhesive formulation with enhanced properties, affirming the feasibility of developing SSAD-based adhesive materials with excellent performance and providing new evidence for the application of SSAD. This study also aims to show that SSAD can be mixed with other substances, and addition of effective components to SSAD can be studied to further adjust or improve its performance.

Injectable biocompatible nanocomposites of Prussian blue nanoparticles and bacterial cellulose as a safe and effective photothermal cancer therapy

Photothermal therapy (PTT) is a novel cancer treatment using a photoabsorber to cause hyperthermia to kill tumors by laser irradiation. Prussian blue nanoparticles (PB NPs) are considered as next-generation photothermal agents due to the facile synthesis and excellent absorption of near-infrared light. Although PB NPs demonstrate remarkable PTT capabilities, their clinical application is limited due to their systemic toxicity. Bacterial cellulose (BC) has been applied to various bio-applications based on its unique properties and biocompatibility. Herein, we design composites with PB NPs and BC as an injectable, highly biocompatible PTT agent (IBC-PB composites). Injectable bacterial cellulose (IBC) is produced through the trituration of BC, with PB NPs synthesized on the IBC surface to prepare IBC-PB composites. IBC-PB composites show in vitro and in vivo photothermal therapeutic effects similar to those of PB NPs but with significantly greater biocompatibility. Specifically, in vitro therapeutic index of IBC-PB composites is 26.5-fold higher than that of PB NPs. Furthermore, unlike PB NPs, IBC-PB composites exhibit no overt toxicity in mice as assessed by blood biochemical analysis and histological images. Hence, it is worth pursuing further research and development of IBC-PB composites as they hold promise as safe and efficacious PTT agents for clinical application.

Effect of Piascledine-bacterial nanocellulose combination on experimental cutaneous wound healing in rat: Histopathological, biochemical and molecular studies

The study investigated the wound healing potential of Piascledine (an avocado/soybean mixture) alone and in combination with bacterial nanocellulose on rat cutaneous wounds. Full-thickness excisional wounds (2 cm in diameter) were induced on the backs of 60 Sprague-Dawley rats, divided into four groups, treated with daily topical application of bacterial nanocellulose (BNC), Piascledine 10% (PSD 10%) and Piascledine+bacterial nanocellulose (PSD + BNC) (10 mg/disk) and normal saline (control) for 20 days. Wounds were monitored daily, and at 10, 20 and 30 days post-injury (DPI), tissue samples were collected for biochemical, histopathological and molecular analyses. Treated rats with PSD and PSD + BNC showed a significant decrease in the wound area compared with other groups. PSD and particularly PSD + BNC modulated inflammation, improved fibroplasia and angiogenesis and scar tissue formation at short term. At the long term, they reduced the scar tissue size and improved collagen fibres alignment, tissue organization and remodelling as well as re-epithelialization. PSD enhanced matrix metalloproteinase-3 (MMP-3) gene expression, collagen and glycosaminoglycans (GAGs) synthesis and decreased tissue inhibitor of metalloproteinase-1 (TIMP-1) gene expression at various stages of wound healing. The study concluded that topical application of Piascledine, particularly in combination with bacterial nanocellulose, promotes wound healing activity by modulating inflammation, regulating MMP-3 expression and enhancing collagen and GAGs synthesis.

Preparation and performance of bacterial cellulose-based enzyme-carrying composite hydrogels as wound healing material

As a biosynthetic polymer, Bacterial cellulose (BC) has been largely used in biomedical and technological fields for the excellent biocompatibility and water holding capability. In this study, BC hydrogel were mass-produced from G. xylinus. A novel gel, BC nanocomposite (BC/NC) hydrogel, was prepared via in situ free radical aqueous polymerization from NIPAM in the presence of Clay was added as physical crosslinker. The physical and chemical properties were evaluated, and the results showed that the properties of the composite hydrogel were improved, for example, the Young’s modulus rose by nearly 30%, from 4.7 to 6.0 Mpa with the increasing of NIPAM. BC/NC-lys hydrogel were prepared by treating BC/NC hydrogel with Lysostaphin solution, and the cytocompatibility and antibacterial activities were assessed in vitro. The effects of composite hydrogel on wound healing were examined in rat skin models, the cure rate was up to 92.35% in the test group and only 78.83% in the control group after 14 days. The composite BC/NC3-lys hydrogel were developed in the hope of accelerating the wound healing process as well as decreasing the infection rate.

SCOBY Cellulose Modified with Apple Powder-Biomaterial with Functional Characteristics

The need for new non-animal and non-petroleum-based materials is strongly emphasized in the sustainable and green economy. Waste materials have proven a valuable resource in this regard. In fact, there have been quite a large number of goods obtained from wastes called "Vegan leather" that have gained the clothing market's attention in recent years. In practice, they are mostly composites of waste materials like cactus, pineapples, or, eventually, apples with polymers like polyurethane or polyvinyl chloride. The article presents the results of work aimed at obtaining a material based entirely on natural, biodegradable raw materials. Bacterial cellulose produced as a byproduct of the fermentation carried out by SCOBY was modified with glycerol and then altered by the entrapment of apple powder. The effect of introducing apple powder into the SCOBY culture media on the mechanical properties of the obtained bacterial cellulose was also evaluated The resulting material acquired new mechanical characteristics that are advantageous in terms of strength. Microscopic observation of the apple powder layer showed that the coverage was uniform. Different amounts of apple powder were used to cover the cellulose surface from 10 to 60%, and it was found that the variant with 40% of this powder was the most favorable in terms of mechanical strength. Also, the application of the created material as a card folder showed that it is durable in use and retains its functional characteristics for at least 1 month. The mechanical properties of modified bacterial cellulose were favorably affected by the entrapment of apple powder on its surface, and as a result, a novel material with functional characteristics was obtained.

De novo strategy with engineering a multifunctional bacterial cellulose-based dressing for rapid healing of infected wounds

The treatment and healing of infected skin lesions is one of the major challenges in surgery. To solve this problem, collagen I (Col-I) and the antibacterial agent hydroxypropyltrimethyl ammonium chloride chitosan (HACC) were composited into the bacterial cellulose (BC) three-dimensional network structure by a novel membrane–liquid interface (MLI) culture, and a Col-I/HACC/BC (CHBC) multifunctional dressing was designed. The water absorption rate and water vapor transmission rate of the obtained CHBC dressing were 35.78 ± 2.45 g/g and 3084 ± 56 g m⁻²·day⁻¹, respectively. The water retention of the CHBC dressing was significantly improved compared with the BC caused by the introduced Col-I and HACC. In vitro results indicated that the combined advantages of HACC and Col-I confer on CHBC dressings not only have outstanding antibacterial properties against Staphylococcus aureus (S. aureus) compared with BC and CBC, but also exhibit better cytocompatibility than BC and HBC to promote the proliferation and spread of NIH3T3 cells and HUVECs. Most importantly, the results of in vivo animal tests demonstrated that the CHBC dressings fully promoted wound healing for 8 days and exhibited shorter healing times, especially in the case of wound infection. Excellent skin regeneration effects and higher expression levels of collagen during infection were also shown in the CHBC group. We believe that CHBC composites with favorable multifunctionality have potential applications as wound dressings to treat infected wounds.

•

The antibacterial agent HACC and collagen I were introduced into BC structure by a novel membrane–liquid interface culture.

•

CHBC dressing has favorable thermostability, water absorption, water retention rate and WVTRs.

•

CHBC dressing has outstanding antibacterial properties against S. aureus.

•

CHBC dressing promoted the proliferation and spread of NIH3T3 cells and HUVECs.

•

CHBC dressing prevented wound infection caused by S. aureus and accelerated wound healing.

Identification of active compounds and molecular mechanisms of Dalbergia tsoi Merr.et Chun to accelerate wound healing

As a traditional Chinese medicine, Dalbergia tsoi Merr.et Chun (JZX) has been used for the treatment of wounds since ancient times. However, the active compounds and molecular mechanisms of JZX in the acceleration of wound healing are still unknown. Herein, we explored the main active compounds and key molecular mechanisms by which JZX accelerates wound healing. The ethanol extract of JZX was subjected to UPLC-Q-Orbitrap HRMS analysis to identify the main compounds. The pharmacological effect of JZX on wound healing was evaluated using a mouse excision wound model. Network pharmacology was utilized to predict the effective compounds and related signal transduction pathways of JZX that were involved in accelerating wound healing. The predicted key signaling pathways were then validated by immunohistochemical analysis. Interactions between the active compounds and therapeutic targets were confirmed by molecular docking analysis. JZX accelerated wound healing, improved tissue quality, and inhibited inflammation and oxidative stress. Moreover, our results suggested that the active components of JZX, such as butin, eriodyctiol, and formononetin, are the key compounds that facilitate wound treatment. Our studies also indicated that JZX accelerated wound healing by regulating the PI3K/Akt signaling pathway and inducing the expression of TGF-β1, FGF2, VEGFA, ECM1, and α-SMA at different stages of skin wound healing. The JZX extract accelerates wound healing by reducing inflammation and inhibiting oxidative stress, regulating the PI3K/Akt signaling pathway, and promoting the expression of growth factors, suggesting that JZX has potential clinical applicability in wound treatment.

A review of wound dressing materials and its fabrication methods: emphasis on three-dimensional printed dressings

A wound is a trauma caused by some adverse external or blunt forces that can damage the body tissues. Wound healing is a complex process that occurs post-injury which involves the revamping of the structure and function of damaged tissues. Scaffolds are engineered tissue structures manufactured using different materials and methods for facilitating the wound healing process. For external wounds, the antimicrobial property and ability to absorb moisture play an important role in the material selection of the scaffold. Among different methods that exist for designing scaffolds, three-dimensional printing has emerged as a promising technique wherein customised scaffolds can be designed. However, the literature on three-dimensional printed dressings is very much limited compared to conventional ones. Therefore, this review specifically focuses on the methods used to design the scaffolds with special emphasis on different three-dimensional printing techniques. It covers the process of external wound healing, different materials used in the fabrication of scaffolds, and their advantages and drawbacks.

Bio-inspired hydrogels with fibrous structure: A review on design and biomedical applications

Numerous tissues in the human body have fibrous structures, including the extracellular matrix, muscles, and heart, which perform critical biological functions and have exceptional mechanical strength. Due to their high-water content, softness, biocompatibility and elastic nature, hydrogels resemble biological tissues. Traditional hydrogels, on the other hand, have weak mechanical properties and lack tissue-like fibrous structures, limiting their potential applications. Thus, bio-inspired hydrogels with fibrous architectures have piqued the curiosity of biomedical researchers. Here, we review fabrication strategies for fibrous hydrogels and their recent progress in the biomedical fields of wound dressings, drug delivery, tissue engineering scaffolds and bioadhesives. Challenges and future perspectives are also discussed.

The Influence of Whey Protein Heating Parameters on Their Susceptibility to Digestive Enzymes and the Antidiabetic Activity of Hydrolysates

The inhibition of dipeptidyl peptidase-IV (DPP-IV) and the release of glucagon-like peptide-1 (GLP-1) could normalize blood glucose levels in diabetic patients. This study evaluated the susceptibility of whey proteins to enzyme hydrolysis and the antidiabetic properties of protein hydrolysates from β-lactoglobulin (β-LG) and α-lactalbumin (α-LA) solutions compared with whey protein isolate (WPI) solution treated at different heating temperatures (65, 75, and 85 °C). α-LA hydrolysate provided the lowest degree of hydrolysis (DH). Those heating temperatures did not significantly affect the DH of all protein hydrolysates. α-LA hydrolysate significantly increased GLP-1 levels and DPP-IV inhibitory activity more than β-LG hydrolysate. WPI hydrolysate inhibited DPP-IV activity less than an α-LA hydrolysate, but they were no significant differences for GLP-1 release activity. Heat treatment could affect the antidiabetic properties of all protein hydrolysates. Heating at 75 °C resulted in greater inhibition of the activity of DPP-IV than at 65 and 85 °C. The highest increase in GLP-1 release was also observed by heating at 75 °C. The recently obtained information is useful for the utilization of α-LA, heated at 75 °C for 30 min, in the preparation of antidiabetic food supplements.

Recent Advances on Bacterial Cellulose-Based Wound Management: Promises and Challenges

Wound healing is a therapeutic challenge due to the complexity of the wound. Various wounds could cause severe physiological trauma and bring social and economic burdens to the patient. The conventional wound healing treatments using bandages and gauze are limited particularly due to their susceptibility to infection. Different types of wound dressing have developed in different physical forms such as sponges, hydrocolloids, films, membranes, and hydrogels. Each of these formulations possesses distinct characteristics making them appropriate for the treatment of a specific wound. In this review, the pathology and microbiology of wounds are introduced. Then, the most recent progress on bacterial cellulose- (BC-) based wound dressing discussed and highlighted their antibacterial and reepithelization properties in vitro and in vivo wound closure. Finally, the challenges and future perspectives on the development of BC-based wound dressing biomaterials are outlined.

Bacterial Cellulose Properties Fulfilling Requirements for a Biomaterial of Choice in Reconstructive Surgery and Wound Healing

Although new therapeutic approaches for surgery and wound healing have recently made a great progress, there is still need for application of better and use novel methods to enhance biocompatibility as well as recovery and healing process. Bacterial Cellulose (BC) is natural cellulose in the form of nanostructure which has the advantages of being used in human body. The medical application of BC in reconstructive, cardiac and vascular surgery as well as wound healing is still under development, but without proved success of repetitive results. A review of studies on Bacterial Cellulose (BC) since 2016 was performed, taking into account the latest reports on the clinical use of BC. In addition, data on the physicochemical properties of BC were used. In all the works, satisfactory results of using Bacterial Cellulose were obtained. In all presented studies various BC implants demonstrated their best performance. Additionally, the works show that BC has the capacity to reach physiological as well as mechanical properties of relevance for various tissue replacement and can be produced in surgeons as well as patient specific expectations such as ear frames, vascular tubes or heart valves as well as wound healing dressings. Results of those experiments conform to those of previous reports utilizing ADM (acellular dermal matrix) and demonstrate that the use of BC has no adverse effects such as ulceration or extrusion and possesses expected properties. Based on preliminary animal as well as the few clinical data BC fittings are promising implants for various reconstructive applications since they are biocompatible with properties allowing blood flow, attach easily to wound bed and remain in place until donor site is healed properly. Additionally, this review shows that BC can be fabricated into patient specific shapes and size, with capability to reach mechanical properties of relevance for heart valve, ear, and muscle replacement. Bacterial cellulose appears, as shown in the above review, to be one of the materials that allow extensive application in the reconstruction after soft tissue defects. Review was created to show the needs of surgeons and the possibilities of using BC through the eyes and knowledge of biotechnologists.

Bacterial Cellulose-A Remarkable Polymer as a Source for Biomaterials Tailoring

Nowadays, the development of new eco-friendly and biocompatible materials using ‘green’ technologies represents a significant challenge for the biomedical and pharmaceutical fields to reduce the destructive actions of scientific research on the human body and the environment. Thus, bacterial cellulose (BC) has a central place among these novel tailored biomaterials. BC is a non-pathogenic bacteria-produced polysaccharide with a 3D nanofibrous structure, chemically identical to plant cellulose, but exhibiting greater purity and crystallinity. Bacterial cellulose possesses excellent physicochemical and mechanical properties, adequate capacity to absorb a large quantity of water, non-toxicity, chemical inertness, biocompatibility, biodegradability, proper capacity to form films and to stabilize emulsions, high porosity, and a large surface area. Due to its suitable characteristics, this ecological material can combine with multiple polymers and diverse bioactive agents to develop new materials and composites. Bacterial cellulose alone, and with its mixtures, exhibits numerous applications, including in the food and electronic industries and in the biotechnological and biomedical areas (such as in wound dressing, tissue engineering, dental implants, drug delivery systems, and cell culture). This review presents an overview of the main properties and uses of bacterial cellulose and the latest promising future applications, such as in biological diagnosis, biosensors, personalized regenerative medicine, and nerve and ocular tissue engineering.

The Application Status of Nanoscale Cellulose-Based Hydrogels in Tissue Engineering and Regenerative Biomedicine

As a renewable, biodegradable, and non-toxic material with moderate mechanical and thermal properties, nanocellulose-based hydrogels are receiving immense consideration for various biomedical applications. With the unique properties of excellent skeletal structure (hydrophilic functional groups) and micro-nano size (small size effect), nanocellulose can maintain the three-dimensional structure of the hydrogel to a large extent, providing mechanical strength while ensuring the moisture content. Owing to its unique features, nanocellulose-based hydrogels have made excellent progress in research and development on tissue engineering, drug carriers, wound dressings, development of synthetic organs, 3D printing, and biosensing. This review provides an overview of the synthesis of different types of nanocellulose, including cellulose nanocrystals, cellulose nanofibers, and bacterial nanocellulose, and describes their unique features. It further provides an updated knowledge of the development of nanocellulose-based functional biomaterials for various biomedical applications. Finally, it discusses the future perspective of nanocellulose-based research for its advanced biomedical applications.

Bacterial cellulose-based composites for biomedical and cosmetic applications: Research progress and existing products

Bacterial cellulose (BC) is a promising unique material for various biomedical and cosmetic applications due to its morphology, mechanical strength, high purity, high water uptake, non-toxicity, chemical controllability, and biocompatibility. Today, extensive investigation is into the manufacturing of BC-based composites with other components such as nanoparticles, synthetic polymers, natural polymers, carbon materials, and biomolecules, which will allow the development of a wide range of biomedical and cosmetic products. Moreover, the addition of different reinforcement substances into BC and the organized arrangement of BC nano-fibers have proven a promising improvement in their properties for biomedical applications. This review paper highlights the progress in synthesizing BC-based composites and their applications in biomedical fields, such as wound healing, drug delivery, tissue engineering, and cancer treatment. It emphasizes high-performance BC-based materials and cosmetic applications. Furthermore, it presents challenges yet to be defeated and future possibilities for BC-based composites for biomedical and cosmetic applications.

Keratin Biomaterials in Skin Wound Healing, an Old Player in Modern Medicine: A Mini Review

Impaired wound healing is a major medical problem. To solve it, researchers around the world have turned their attention to the use of tissue-engineered products to aid in skin regeneration in case of acute and chronic wounds. One of the primary goals of tissue engineering and regenerative medicine is to develop a matrix or scaffold system that mimics the structure and function of native tissue. Keratin biomaterials derived from wool, hair, and bristle have been the subjects of active research in the context of tissue regeneration for over a decade. Keratin derivatives, which can be either soluble or insoluble, are utilized as wound dressings since keratins are dynamically up-regulated and needed in skin wound healing. Tissue biocompatibility, biodegradability, mechanical durability, and natural abundance are only a few of the keratin biomaterials' properties, making them excellent wound dressing materials to treat acute and chronic wounds. Several experimental and pre-clinical studies described the beneficial effects of the keratin-based wound dressing in faster wound healing. This review focuses exclusively on the biomedical application of a different type of keratin biomaterials as a wound dressing in pre-clinical and clinical conditions.

Multifunctional wound dressing for rapid hemostasis, bacterial infection monitoring and photodynamic antibacterial therapy

Wound management is a major global issue, and there is a growing challenge to develop more effective hemostatic dressings to control bleeding and prevent pathogen infections. In this study, a multifunctional wound dressing was developed to meet the clinical need. The hemostatic layer of wound dressing can quickly stop the bleeding. Meanwhile, the detection layer is used for real-time fluorescence monitoring of the bacterial colonization. When infection occurs, wound dressing is further subjected to illumination for in-situ photodynamic antibacterial treatment. In the rabbit ear artery hemostasis model, the hemostasis time of the wound dressing was 1 s. The detection limit of the wound dressing was 1.4 × 10⁵ CFU/cm² for Escherichia coli, 5.9 × 10⁵ CFU/cm² for Staphylococcus aureus, and 3.8 × 10⁶ CFU/cm² for Pseudomonas aeruginosa, respectively. Compared with the control group, an enhanced wound closure (up to 97.3%) were observed in mice treated with the wound dressing. In vitro and in vivo experiment results suggested that the wound dressing was effective in killing pathogenic bacterial and exhibited good biological compatibility, and induced no inflammatory reaction. The proposed design prevents massive bleeding and wound infection, and further promotes wound healing. STATEMENT OF SIGNIFICANCE: In this work, we developed a multifunctional wound dressing, capable of rapid hemostasis, colorimetric monitoring of bacterial infection, and in situ photodynamic antibacterial. The hemostatic layer can quickly stop the bleeding due to its large specific surface area and adsorption pore size for platelet at bleeding site. Meanwhile, the detection layer can intelligently monitor the bacterial infection and respond to report bacterial infection by emitting fluorescence. When infection occurs, wound dressing can be used for in-situ photodynamic antibacterial treatment. In vitro and in vivo results showed that the wound dressing was biocompatible, prevented massive bleeding and wound infection, and further promoted wound healing.

Recent Advances in Cellulose-Based Structures as the Wound-Healing Biomaterials: A Clinically Oriented Review

Application of wound-healing/dressing biomaterials is amongst the most promising approaches for wound repair through protection from pathogen invasion/contamination, maintaining moisture, absorbing exudates, modulating inflammation, and facilitating the healing process. A wide range of materials are used to fabricate wound-healing/dressing biomaterials. Active wound-healing/dressings are next-generation alternatives for passive biomaterials, which provide a physical barrier and induce different biological activities, such as antibacterial, antioxidant, and proliferative effects. Cellulose-based biomaterials are particularly promising due to their tunable physical, chemical, mechanical, and biological properties, accessibility, low cost, and biocompatibility. A thorough description and analysis of wound-healing/dressing structures fabricated from cellulose-based biomaterials is discussed in this review. We emphasize and highlight the fabrication methods, applied bioactive molecules, and discuss the obtained results from in vitro and in vivo models of cellulose-based wound-healing biomaterials. This review paper revealed that cellulose-based biomaterials have promising potential as the wound-dressing/healing materials and can be integrated with various bioactive agents. Overall, cellulose-based biomaterials are shown to be effective and sophisticated structures for delivery applications, safe and multi-customizable dressings, or grafts for wound-healing applications.

Nanocellulose/palygorskite biocomposite membranes for controlled release of metronidazole

The incorporation of drugs in nanocomposites can be considered a potential strategy for controlled drug release. In this study, a nanocomposite based on bacterial cellulose and the palygorskite clay (BC/PLG) was produced and loaded with metronidazole (MTZ). The samples were characterized using X-ray diffraction (XRD) Spectroscopy, thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM). The barrier properties were determined to water vapor permeability (WVP). Adsorption tests with PLG were performed using MTZ and drug release profile of the membranes was investigated. The results indicated that PLG increased the crystallinity of the nanocomposites, and greater thermal stability when PLG concentration was 15.0% (BC/PLG15) was observed. WVP of the samples also varied, according to the clay content. Adsorption equilibrium was achieved from 400 mg/L of the PLG and a plateau in the MTZ release rates from BC/PLG was observed after 30 min. Therefore, the results of this study show the potential of these nanocomposite membranes as a platform for controlled drug release.

Kombucha SCOBY Waste as a Catalyst Support

It is established that food waste can be repurposed to extend its lifecycle and decrease its carbon footprint. In this work, SCOBY (symbiotic culture of bacteria and yeast) waste from kombucha tea production has been repurposed as a catalyst support. Copper nanoparticles (Cu NPs) have been embedded in a piece of treated SCOBY via an in-situ method which enabled the catalyst, inCu/t-SCOBY, to be easily recycled. In addition, inCu/t-SCOBY catalyzed the full reduction of 4-nitrophenol in an excess of sodium borohydride (NaBH₄ ) within 20 minutes. After 6 additional catalytic cycles, the catalyst maintained up to 50% of its performance in the first cycle. Characterization of the catalyst has also been done to understand the mechanism of action and interactions occurring between t-SCOBY and Cu NPs. The results of this work clearly present a proof-of-concept in utilizing porous wastes materials such as SCOBY as catalyst supports, allowing metallic NPs to be efficacious and practical heterogenous catalysts.

Advanced Functional Materials Based on Nanocellulose for Pharmaceutical/Medical Applications

Nanocelluloses (NCs), with their remarkable characteristics, have proven to be one of the most promising "green" materials of our times and have received special attention from researchers in nanomaterials. A diversity of new functional materials with a wide range of biomedical applications has been designed based on the most desirable properties of NCs, such as biocompatibility, biodegradability, and their special physicochemical properties. In this context and under the pressure of rapid development of this field, it is imperative to synthesize the successes and the new requirements in a comprehensive review. The first part of this work provides a brief review of the characteristics of the NCs (cellulose nanocrystals-CNC, cellulose nanofibrils-CNF, and bacterial nanocellulose-BNC), as well as of the main functional materials based on NCs (hydrogels, nanogels, and nanocomposites). The second part presents an extensive review of research over the past five years on promising pharmaceutical and medical applications of nanocellulose-based materials, which have been discussed in three important areas: drug-delivery systems, materials for wound-healing applications, as well as tissue engineering. Finally, an in-depth assessment of the in vitro and in vivo cytotoxicity of NCs-based materials, as well as the challenges related to their biodegradability, is performed.

Functionalization of Aminoalkylsilane-Grafted Bacterial Nanocellulose with ZnO-NPs-Doped Pullulan Electrospun Nanofibers for Multifunctional Wound Dressing

High moisture permeability, excellent mechanical properties in a wet state, high water-holding capability, and high exudate absorption make bacterial nanocellulose (BNC) a favorable candidate for biomedical device production, especially wound dressings. The lack of antibacterial activity and healing-promoting ability are the main drawbacks that limit its wide application. Pullulan (Pul) is a nontoxic polymer that can promote wound healing. Zinc oxide nanoparticles (ZnO-NPs) are well-known as a safe antibacterial agent. In this study, aminoalkylsilane was chemically grafted on a BNC membrane (A-g-BNC) and used as a bridge to combine BNC with Pul-ZnO-NPs hybrid electrospun nanofibers. FTIR results confirmed the successful production of A-g-BNC/Pul-ZnO. The obtained dressing demonstrated blood clotting performance better than that of BNC. The dressing showed an ability to release ZnO, and its antibacterial activity was up to 5 log values higher than that of BNC. The cytotoxicity of the dressing toward L929 fibroblast cells clearly showed safety due to the proliferation of fibroblast cells. The animal test in a rat model indicated faster healing and re-epithelialization, small blood vessel formation, and collagen synthesis in the wounds covered by A-g-BNC/Pul-ZnO. The new functional dressing, fabricated with a cost-effective and easy method, not only showed excellent antibacterial activity but could also accelerate wound healing.

Electrosprayed Shrimp and Mushroom Nanochitins on Cellulose Tissue for Skin Contact Application

Cosmetics has recently focused on biobased skin-compatible materials. Materials from natural sources can be used to produce more sustainable skin contact products with enhanced bioactivity. Surface functionalization using natural-based nano/microparticles is thus a subject of study, aimed at better understanding the skin compatibility of many biopolymers also deriving from biowaste. This research investigated electrospray as a method for surface modification of cellulose tissues with chitin nanofibrils (CNs) using two different sources-namely, vegetable (i.e., from fungi), and animal (from crustaceans)-and different solvent systems to obtain a biobased and skin-compatible product. The surface of cellulose tissues was uniformly decorated with electrosprayed CNs. Biological analysis revealed that all treated samples were suitable for skin applications since human dermal keratinocytes (i.e., HaCaT cells) successfully adhered to the processed tissues and were viable after being in contact with released substances in culture media. These results indicate that the use of solvents did not affect the final cytocompatibility due to their effective evaporation during the electrospray process. Such treatments did not also affect the characteristics of cellulose; in addition, they showed promising anti-inflammatory and indirect antimicrobial activity toward dermal keratinocytes in vitro. Specifically, cellulosic substrates decorated with nanochitins from shrimp showed strong immunomodulatory activity by first upregulating then downregulating the pro-inflammatory cytokines, whereas nanochitins from mushrooms displayed an overall anti-inflammatory activity via a slight decrement of the pro-inflammatory cytokines and increment of the anti-inflammatory marker. Electrospray could represent a green method for surface modification of sustainable and biofunctional skincare products.

Synergistic Photodynamic and Photothermal Antibacterial Activity of In Situ Grown Bacterial Cellulose/MoS2-Chitosan Nanocomposite Materials with Visible Light Illumination

Owing to the rise in prevalence of multidrug-resistant pathogens attributed to the overuse of antibiotics, infectious diseases caused by the transmission of microbes from contaminated surfaces to new hosts are an ever-increasing threat to public health. Thus, novel materials that can stem this crisis, while also functioning via multiple antimicrobial mechanisms so that pathogens are unable to develop resistance to them, are in urgent need. Toward this goal, in this work, we developed in situ grown bacterial cellulose/MoS₂-chitosan nanocomposite materials (termed BC/MoS₂-CS) that utilize synergistic membrane disruption and photodynamic and photothermal antibacterial activities to achieve more efficient bactericidal activity. The BC/MoS₂-CS nanocomposite exhibited excellent antibacterial efficacy, achieving 99.998% (4.7 log units) and 99.988% (3.9 log units) photoinactivation of Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, respectively, under visible-light illumination (xenon lamp, 500 W, λ ≥ 420 nm, and 30 min). Mechanistic studies revealed that the use of cationic chitosan likely facilitated bacterial membrane disruption and/or permeability, with hyperthermia (photothermal) and reactive oxygen species (photodynamic) leading to synergistic pathogen inactivation upon visible-light illumination. No mammalian cell cytotoxicity was observed for the BC/MoS₂-CS membrane, suggesting that such composite nanomaterials are attractive as functional materials for infection control applications.

Applications of Bacterial Cellulose as a Natural Polymer in Tissue Engineering

Choosing the material with the best regeneration potential and properties closest to that of the extracellular matrix is one of the main challenges in tissue engineering and regenerative medicine. Natural polymers, such as collagen, elastin, and cellulose, are widely used for this purpose in tissue engineering. Cellulose derived from bacteria has excellent mechanical properties, high hydrophilicity, crystallinity, and a high degree of polymerization and, therefore, can be used as scaffold/membrane for tissue engineering. In the current study, we reviewed the latest trends in the application of bacterial cellulose (BC) polymers as a scaffold in different types of tissue, including bone, vascular, skin, and cartilage. Also, we mentioned the biological and mechanical advantages and disadvantages of BC polymers. Given the data presented in this study, BC polymer could be suggested as a favorable natural polymer in the design of tissue scaffolds. Implementing novel composites that combine this polymer with other materials through modern or rapid prototyping methods can open up a great prospect in the future of tissue engineering and regenerative medicine.

Homogeneous and efficient production of a bacterial nanocellulose-lactoferrin-collagen composite under an electric field as a matrix to promote wound healing

BNC was functionalized with collagen (COL) and lactoferrin (LF) to form three different composites: BNC/COL, BNC/LF and BNC/LF/COL using a novel electrophoresis-based technology. The technology is less time-consuming than traditional immersion-adsorption methods and offers the additional advantages of greater protein loading, better homogeneity and a lower requirement for processing solution. Significantly, it has general applicability and great potential for fabricating other similar composites. The water-holding capability and water vapor transmission rate (WVTR) of BNC composites were significantly improved, particularly in the case of BNC/LF/COL, with a WVTR of 2600 g m-2 d-1, indicating that the composite maintains a moderately moist environment over the wound bed, which would enhance epithelial cell migration during the healing process. Compared with BNC and BNC/COL, the LF-impregnated composites mediated a reduction in bacterial viability of at least 77%. Impregnation with COL significantly improved the cytocompatibility of BNC composites to promote the adhesion and proliferation of fibroblast cells. Furthermore, a greater therapeutic effect of BNC/LF/COL was observed in a rat model of wound healing, with a new epithelium formed within 9 days and without any significant adverse reactions. These results suggest that BNC/LF/COL obtained using the electrophoresis method represents a promising wound dressing for use in practical applications.

Kinetic Release Studies of Antibiotic Patches for Local Transdermal Delivery

This study investigates the usage of electrohydrodynamic (EHD)-3D printing for the fabrication of bacterial cellulose (BC)/polycaprolactone (PCL) patches loaded with different antibiotics (amoxicillin (AMX), ampicillin (AMP), and kanamycin (KAN)) for transdermal delivery. The composite patches demonstrated facilitated drug loading and encapsulation efficiency of drugs along with extended drug release profiles. Release curves were also subjected to model fitting, and it was found that drug release was optimally adapted to the Higuchi square root model for each drug. They performed a time-dependent and diffusion-controlled release from the patches and followed Fick’s diffusion law by the Korsmeyer–Peppas energy law equation. Moreover, produced patches demonstrated excellent antimicrobial activity against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) strains, so they could be helpful in the treatment of chronic infectious lesions during wound closures. As different tests have confirmed, various types of antibiotics could be loaded and successfully released regardless of their types from produced BC/PCL patches. This study could breathe life into the production of antibiotic patches for local transdermal applications in wound dressing studies and improve the quality of life of patients.

A review of functionalised bacterial cellulose for targeted biomedical fields

Bacterial cellulose (BC), which can be produced by microorganisms, is an ideal biomaterial especially for tissue engineering and drug delivery systems thanks to its properties of high purity, biocompatibility, high mechanical strength, high crystallinity, 3 D nanofiber structure, porosity and high-water holding capacity. Therefore, wide ranges of researches have been done on the BC production process and its structural and physical modifications to make it more suitable for certain targeted biomedical applications thoroughly. BC's properties such as mechanical strength, pore diameter and porosity can be tuned in situ or ex situ processes by using various polymer and compounds. Besides, different organic or inorganic compounds that support cell attachment, proliferation and differentiation or provide functions such as antimicrobial effectiveness can be gained to its structure for targeted application. These processes not only increase the usage options of BC but also provide success for mimicking the natural tissue microenvironment, especially in tissue engineering applications. In this review article, the studies on optimisation of BC production in the last decade and the BC modification and functionalisation studies conducted for the three main perspectives as tissue engineering, drug delivery and wound dressing with diverse approaches are summarized.

Asiaticoside and polylysine-releasing collagen complex for effectively reducing initial inflammatory response using inflamed induced in vitro model

Inflammation is a significant clinical problem that can arise from full-thickness wounds or burn injuries or microbial disease. Although topical wound healing substances could promote rapid wound healing by preventing or reducing the consequences of inflammation, there still remains a need for the development of novel substances that can effectively reduce infection and inflammation in initial wound healing phase. In this study, collagen was combined with asiaticoside (AS) and ε-poly-l-lysine (εPLL). This complex was then applied to in vitro models of infection and inflammation. Collagen-AS coatings inhibited the initial inflammatory response to LPS through a sustained release of AS, and a bilayer coating-εPLL showed a notable antimicrobial effect using microbial infection test. In this study, we determined whether asiaticoside and εPLL have anti-inflammatory and antibacterial effects through different mechanisms. Collectively, the collagen-AS/εPLL complex indicated great therapeutic potentials for accelerate wound healing and the complex may be considered as a artificial scaffold substitute product to full-thickness wound healing.