Improvement of adhesion and proliferation of mouse embryonic stem cells cultured on ozone/UV surface-modified substrates

Preparation of a Cage-Type Polyglycolic Acid/Collagen Nanofiber Blend with Improved Surface Wettability and Handling Properties for Potential Biomedical Applications

Electrospun biobased polymeric nanofiber blends are widely used as biomaterials for different applications, such as tissue engineering and cell adhesion; however, their surface wettability and handling require further improvements for their practical utilization in the assistance of surgical operations. Therefore, Polyglycolic acid (PGA) and collagen-based nanofibers with three different ratios (40:60, 50:50 and 60:40) were prepared using the electrospinning method, and their surface wettability was improved using ozonation and plasma (nitrogen) treatment. The effect on the wettability and the morphology of pristine and blended PGA and collagen nanofibers was assessed using the WCA test and SEM, respectively. It was observed that PGA/collagen with the ratio 60:40 was the optimal blend, which resulted in nanofibers with easy handling and bead-free morphology that could maintain their structural integrity even after the surface treatments, imparting hydrophilicity on the surface, which can be advantageous for cell adhesion applications. Additionally, a cage-type collector was used during the electrospinning process to provide better handling properties to (PGA/collagen 60:40) blend. The resultant nanofiber mat was then incorporated with activated poly (α,β-malic acid) to improve its surface hydrophilicity. The chemical composition of PGA/collagen 60:40 was assessed using FTIR spectroscopy, supported by Raman spectroscopy.

UV/ozone irradiation manipulates immune response for antibacterial activity and bone regeneration on titanium

The immunomodulatory antibacterial activity and osteoimmunomodulatory properties of implantable biomaterials significantly influence bone regeneration. Various types of ultraviolet (UV) instrument are currently in use to greatly enhance the antibacterial activity and osteoconductive capability of titanium, it remains unclear how UV treatment modulates immune response. Compared to traditional UV treatment, the combination of low-dose ozone with UV irradiation is considered a new option to give benefits to surface modification and reduce the drawbacks of UV and ozone individually. Herein, the aim of this study was to elucidate the immune-modulatory properties of macrophages on UV/ozone-irradiated titanium that serve as defense against S. aureus and the crosstalk between immune cells and osteoblasts. Three different cell and bacteria co-culture systems were developed in order to investigate the race between host cells and bacteria to occupy the surface. In vitro immunological experiments indicated that UV/ozone irradiation significantly enhanced the phagocytic and bactericidal activity of macrophages against S. aureus. Further, in vitro and in vivo studies evidenced the favorable osteoimmune environment for osteogenic differentiation and bone formation. This research suggests vital therapeutic potential of UV/ozone irradiation for preventing the biomaterial-associated infections and achieving favorable bone formation simultaneously.

Non-Toxic Crosslinking of Electrospun Gelatin Nanofibers for Tissue Engineering and Biomedicine-A Review

Electrospinning can be used to prepare nanofiber mats from diverse polymers, polymer blends, or polymers doped with other materials. Amongst this broad range of usable materials, biopolymers play an important role in biotechnological, biomedical, and other applications. However, several of them are water-soluble, necessitating a crosslinking step after electrospinning. While crosslinking with glutaraldehyde or other toxic chemicals is regularly reported in the literature, here, we concentrate on methods applying non-toxic or low-toxic chemicals, and enzymatic as well as physical methods. Making gelatin nanofibers non-water soluble by electrospinning them from a blend with non-water soluble polymers is another method described here. These possibilities are described together with the resulting physical properties, such as swelling behavior, mechanical strength, nanofiber morphology, or cell growth and proliferation on the crosslinked nanofiber mats. For most of these non-toxic crosslinking methods, the degree of crosslinking was found to be lower than for crosslinking with glutaraldehyde and other common toxic chemicals.

UV/ozone surface modification combined with atmospheric pressure plasma irradiation for cell culture plastics to improve pluripotent stem cell culture

Culturing pluripotent stem cells effectively requires substrates coated with feeder cell layers or cell-adhesive matrices. It is difficult to employ pluripotent stem cells as resources for regenerative medicine due to risks of culture system contamination by animal-derived factors, or the large costs associated with the use of adhesive matrices. To enable a coating-free culture system, we focused on UV/ozone surface modification and atmospheric pressure plasma treatment for polystyrene substrates, to improve adhesion and proliferation of pluripotent stem cells. In this study, to develop a feeder- and matrix coating-free culture system for embryonic stem cells (ESCs), mouse ESCs were cultured on polystyrene substrates that were surface-modified using UV/ozone-plasma combined treatment. mESCs could be successfully cultured under feeder-free conditions upon UV/ozone-plasma combined treatment of culture substrates, without any further chemical treatments, and showed similar proliferation rates to those of cells grown on the feeder cell layer or matrix-coated substrates.

Improved tissue adhesion property of a hydrophobically modified Alaska pollock derived gelatin sheet by UV treatment

Tissue adhesives have been developed for sealing tissue damaged in surgery. Among these, sheet-type adhesives require a relatively long time to adhere to biological tissue under wet conditions. To address this clinical problem, we fabricated a tissue-adhesive fiber sheet (AdFS) based on decanyl group (C10) modified Alaska pollock-derived gelatin (C10-ApGltn) using electrospinning. Ultraviolet (UV) irradiation of the AdFS was performed to increase the affinity between the AdFS and wet biological tissue by introducing hydrophilic functional groups. The UV irradiated AdFS (UV-C10-AdFS) strongly adhered to porcine pleura within 2 min under wet conditions and showed higher burst strength compared with the original ApGltn (Org-ApGltn) sheet. Hematoxylin-eosin stained sections revealed that a dense UV-C10-AdFS layer remained on the surface of the porcine pleura even after burst strength measurement. Moreover, UV-C10-AdFS has excellent cytocompatibility and efficiently supports the growth of L929 cells. UV-C10-AdFS is a promising adhesive material for sealing wet biological tissue.

Continuous ES/Feeder Cell-Sorting Device Using Dielectrophoresis and Controlled Fluid Flow

Pluripotent stem cells (PSCs) are considered as being an important cell source for regenerative medicine. The culture of PSCs usually requires a feeder cell layer or cell adhesive matrix coating such as Matrigel, laminin, and gelatin. Although a feeder-free culture using a matrix coating has been popular, the on-feeder culture is still an effective method for the fundamental study of regenerative medicine and stem cell biology. To culture PSCs on feeder cell layers, the elimination of feeder cells is required for biological or gene analysis and for cell passage. Therefore, a simple and cost-effective cell sorting technology is required. There are several commercialized cell-sorting methods, such as FACS or MACS. However, these methods require cell labeling by fluorescent dye or magnetic antibodies with complicated processes. To resolve these problems, we focused on dielectrophoresis (DEP) phenomena for cell separation because these do not require any fluorescent or magnetic dyes or antibodies. DEP imposes an electric force on living cells under a non-uniform AC electric field. The direction and magnitude of the DEP force depend on the electric property and size of the cell. Therefore, DEP is considered as a promising approach for sorting PSCs from feeder cells. In this study, we developed a simple continuous cell-sorting device using the DEP force and fluid-induced shear force. As a result, mouse embryonic stem cells (mESCs) were purified from a mixed-cell suspension containing mESCs and mouse embryonic fibroblasts (MEFs) using our DEP cell-sorting device.

Cost-effective culture of human induced pluripotent stem cells using UV/ozone-modified culture plastics with reduction of cell-adhesive matrix coating

Human induced pluripotent stem cells (hiPSCs) are considered to be one of the most promising cell resources for regenerative medicine. HiPSCs usually maintain their pluripotency when they are cultured on feeder cell layers or are attached to a cell-adhesive extracellular matrix. In this study, we developed a culture system based on UV/ozone modification for conventional cell culture plastics to generate a suitable surface condition for hiPSCs. Time of flight secondary ion mass spectrometry (ToF-SIMS) was carried out to elucidate the relationship between hiPSC adhesion and UV/ozone irradiation-induced changes to surface chemistry of cell culture plastics. Cell culture plastics with modified surfaces enabled growth of a feeder-free hiPSC culture with markedly reduced cell-adhesive matrix coating. Our cell culture system using UV/ozone-modified cell culture plastics may produce clinically relevant hiPSCs at low costs, and can be easily scaled up in culture systems to produce a large number of hiPSCs.

Plasma polymerised nanoscale coatings of controlled thickness for efficient solid-phase presentation of growth factors

The engineering of biomaterial surfaces and scaffolds for specific biomedical and clinical application is of growing interest. Certain functionalised surfaces can capture and deliver bioactive molecules, such as growth factors (GF), enhancing the clinical efficacy of such systems. With a custom-made plasma polymerisation reactor described here we have developed bioactive polymer coatings based on poly(ethyl acrylate) (PEA). This remarkable polymer unfolds fibronectin (FN) upon adsorption to allow the GF binding region of FN to sequester and present GFs with high efficiency. We systematically evaluate process conditions and their impact on plasma polymerised PEA coatings and characterise the effect of plasma power and deposition time on thickness, wettability and chemical composition of the coatings. We demonstrate that functional substrate roughness can be maintained after deposition of the polymer coatings. Importantly, we show that coatings deposited at different conditions all maintain a similar or better bioactivity than spin coated PEA references. We show that in PEA plasma polymerised coatings FN assembles into nanonetworks with high availability of integrin and GF binding regions that sequester bone morphogenetic protein-2 (BMP-2). We also report similar mesenchymal stem cell adhesion behaviour, as characterised by focal adhesions, and differentiation potential on BMP-2 coated surfaces, regardless of plasma deposition conditions. This is a potent and versatile technology that can help facilitate the use of GFs in clinical applications.

Enhancement of human induced pluripotent stem cells adhesion through multilayer laminin coating

Bioengineered cell substrates are a highly promising tool to govern the differentiation of stem cells in vitro and to modulate the cellular behavior in vivo. While this technology works fine for adult stem cells, the cultivation of human induced pluripotent stem cells (hiPSCs) is challenging as these cells typically show poor attachment on the bioengineered substrates, which among other effects causes substantial cell death. Thus, very limited types of surfaces have been demonstrated suitable for hiPSC cultures. The multilayer coating approach that renders the surface with diverse chemical compositions, architectures, and functions can be used to improve the adhesion of hiPSCs on the bioengineered substrates. We hypothesized that a multilayer formation based on the attraction of molecules with opposite charges could functionalize the polystyrene (PS) substrates to improve the adhesion of hiPSCs. Polymeric substrates were stepwise coated, first with dopamine to form a polydopamine (PDA) layer, second with polylysine and last with Laminin-521. The multilayer formation resulted in the variation of hydrophilicity and chemical functionality of the surfaces. Hydrophilicity was detected using captive bubble method and the amount of primary and secondary amines on the surface was quantified by fluorescent staining. The PDA layer effectively immobilized the upper layers and thereby improved the attachment of hiPSCs. Cell adhesion was enhanced on the surfaces coated with multilayers, as compared to those without PDA and/or polylysine. Moreover, hiPSCs spread well over this multilayer laminin substrate. These cells maintained their proliferation capacity and differentiation potential. The multilayer coating strategy is a promising attempt for engineering polymer-based substrates for the cultivation of hiPSCs and of interest for expanding the application scope of hiPSCs.