Fabrication, optimization and characterization of electrospun poly(caprolactone)/gelatin/graphene nanofibrous mats

In vitro evaluation of the therapeutic efficacy of Moringa oleifera and oxaliplatin in 3D printed polycaprolactone/gelatin implantable patches: A potential strategy for overcoming drug resistance in colorectal cancer treatment

This study explores a novel approach for the treatment of colorectal cancer (CRC) by evaluating the therapeutic effects of oxaliplatin (OX) and Moringa oleifera (MO) through the use of 3D printed implantable patches composed of polycaprolactone and gelatin polymers. This represents the first use of 3D printed PCL/GE patches for MO delivery in CRC, offering a promising strategy for localized therapy. Traditional CRC treatments, including surgery and chemotherapy, often result in suboptimal outcomes and severe side effects, while cancer cells increasingly show resistance to conventional treatments. We developed implantable patches using PCL/GE based polymers loaded with either OX or MO at various concentrations (50-500 μg/mL). In vitro studies using HCT 116 colon cancer cells showed that MO loaded patches demonstrated superior antiproliferative effects compared to OX loaded patches. The patches exhibited enhanced drug release in acidic conditions (pH 4), simulating the tumor microenvironment. Notably, while OX loaded patches induced necrotic cell death, MO loaded patches triggered controlled apoptotic cell death without inflammation, as evidenced by increased LDH activity and reduced expression of apoptotic genes. This research presents an innovative treatment strategy, providing controlled drug release, reduced systemic toxicity compared to systemic chemotherapy, and improved drug delivery, potentially overcoming conventional chemotherapy limitations.

3D nanofibrous frameworks with on-demand engineered gray and white matters for reconstructing the injured spinal cord

Spinal cord injury (SCI) is a disruptive and heterogeneous medical condition affecting millions of patients worldwide. Due to the absence of medical treatments to effectively restore the lost sensorimotor and autonomic functions, there is an ongoing pursuit of scaffolds aiming to bridge the injured spinal area. Herein, a novel electrospinning modality to construct 3D nanofibrous frameworks (NFFs) in accordance with distinct spinal cord microenvironments is used to engineer a biomimetic hemicord. This scaffolding concept gravitates around the possibility of customizing NFFs with on-demand engineered gray and white matters to replicate the native spinal cytoarchitecture. In particular, a 3D reduced graphene oxide-based fibrous-porous system is developed to imitate the gray matter, while a 3D polycaprolactone (PCL)-chitosan nanofibrous network combined with PCL-graphene microfibers intends to mimic the white matter. The scaffolding components are tested in vitro with embryonic neural progenitor cells, integrated into the biomimetic NFF, and then tested in vivo in paralyzed rats with cervical hemisection. After 4 months of implantation, the scaffold generates both neuroprotective (e.g., limited infiltration of vimentin+ and ED1+ cells) and neuroregenerative (e.g., presence of new blood vessels and neurites) features accompanied with promising signs of forelimb function recovery.

Optimizing Electroconductive PPy-PCL Scaffolds for Enhanced Tissue Engineering Performance

The integration of electrically conductive materials is a promising approach in tissue regeneration research. The study presented focuses on the creation of electroconductive scaffolds made from polypyrrole-polycaprolactone (PPy-PCL) using optimal processing parameters. Utilizing Box-Behnken response surface methodology for in situ chemical polymerization of PPy, the scaffolds exhibited a maximum conductivity of 2.542 mS/cm. Morphological examination via scanning electron microscopy (SEM) indicated uniform dispersion of PPy particles within PCL fibers. Fourier transform infrared spectroscopy (FTIR) and energy dispersive x-ray (EDX) analysis validated the composition of the scaffolds, while mechanical testing revealed that the optimized scaffolds exhibit superior tensile strength and Young's modulus compared to scaffolds comprised only of PCL. The hydrophilicity of the scaffolds was improved considerably, transitioning from initially hydrophobic to fully hydrophilic for the optimum scaffold, making it suitable for tissue engineering applications. Cell viability assays, including MTT with L929 fibroblasts and Alamar Blue with bone marrow mesenchymal stem cells (bmMSCs), reflected no cytotoxicity. They showed an increase in metabolic activity, suggesting the capability of the scaffolds to support cellular functions. In conclusion, the in situ synthesis of PPy in the PCL matrix by optimizing the fabrication parameters resulted in conductive scaffolds with promising structural and functional properties for tissue engineering.

Dispersion of halloysite nanotube/lipase nanohybrids as nanofillers into polyvinyl alcohol-sodium alginate cryogel: Characterization and bio-catalytic activity analysis

The purpose of this study is to formulate and characterize the cryogels containing halloysite nanotube (HNT)/lipase nanohybrid (NH-cryogel) in comparison to pure cryogels as well as cryogels containing lipase (lipase-cryogel). The cryogels were synthesized using polyvinyl alcohol (PVA) and sodium alginate (SA). The products are tested to explore the influence of the HNT/lipase nanohybride (NH) as nanofillers on the cryogel properties using methods such as swelling degree, water uptake measurement, TGA, XRD, FESEM and FTIR. Additionally, the effects of cryogels on the stability and biocatalytic activities of lipase and NH, were studied and compared to the free lipase to evaluate their potential applications as enzyme carriers. The addition of nanofillers into the cryogel improved is thermal stability. The results implied that NH-cryogel had better enzyme activity than lipase-cryogel and free lipase at different temperatures and pH values. The NH-cryogel residual activity was 85.5 % after ten cycles of reuse while lipase-cryogel showed lower residual activity (60.3 %). Furthermore, the NH-cryogel retained 81.1 % of its residual activity while this was 51.0 % for lipase-cryogel after thirty days of storage. Therefore, the presented results in this study provide a pathway to show that produced nano-composite cryogels could be useful substances for food and pharmaceutical industries applications.

Graphene-enhanced PCL electrospun nanofiber scaffolds for cardiac tissue engineering

Cardiovascular diseases, particularly myocardial infarction, have significant healthcare challenges due to the limited regenerative capacity of injured heart tissue. Cardiac tissue engineering (CTE) offers a promising approach to repairing myocardial damage using biomaterials that mimic the heart's extracellular matrix. This study investigates the potential of graphene nanopowder (Gnp)-enhanced polycaprolactone (PCL) scaffolds fabricated via electrospinning to improve the properties necessary for effective cardiac repair. This work aimed to analyze scaffolds with varying graphene concentrations (0.5%, 1%, 1.5%, and 2% by weight) to determine their morphological, chemical, mechanical, and biocompatibility characteristics. The results presented that incorporating graphene improves PCL scaffolds' mechanical properties and cellular interactions. The optimal concentration of 1% graphene significantly enhanced mechanical properties and biocompatibility, promoting cell adhesion and proliferation. These findings suggest that Gnp-enhanced PCL scaffolds at this concentration can serve as a potent substrate for CTE providing insights into designing more effective biomaterials for myocardial restoration.

Alginate hydrogel-PCL/gelatin nanofibers composite scaffold containing mesenchymal stem cells-derived exosomes sustain release for regeneration of tympanic membrane perforation

Exosomes are among the most effective therapeutic tools for tissue engineering. This study demonstrates that a 3D composite scaffold containing exosomes can promote regeneration in rat tympanic membrane perforation (TMP). The scaffolds were characterized using scanning electron microscopy (SEM), degradation, PBS adsorption, swelling, porosity, and mechanical properties. To confirm the isolation of exosomes from human adipose-derived mesenchymal stem cells (hAMSCs), western blot, SEM, and dynamic light scattering (DLS) were performed. The Western blot test confirmed the presence of exosomal surface markers CD9, CD81, and CD63. The SEM test revealed that the isolated exosomes had a spherical shape, while the DLS test indicated an average diameter of 82.5 nm for these spherical particles. MTT assays were conducted to optimize the concentration of hAMSCs-exosomes in the hydrogel layer of the composite. Exosomes were extracted on days 3 and 7 from an alginate hydrogel containing 100 and 200 μg/mL of exosomes, with 100 μg/mL identified as the optimal value. The optimized composite scaffold demonstrated improved growth and migration of fibroblast cells. Animal studies showed complete tympanic membrane regeneration (TM) after five days. These results illustrate that a scaffold containing hAMSC-exosomes can serve as an appropriate tissue-engineered scaffold for enhancing TM regeneration.

Modeling and optimization of poly(lactic acid)/poly(ℇ-caprolactone)/Nigella sativa extract nanofibers production for skin wounds healing by artificial neural network and response surface methodology models

Electrospun fibrous scaffolds have great potential for the effective treatment of wounds. Novel blend scaffolds were fabricated from poly(ℇ- caprolactone) (PCL)/poly (lactic acid) (PLA) with Nigella sativa (NS) extract in different concentrations of 10 %, 15 %, 20 %, and 25 % by one nozzle electrospinning. RSM and ANN models were used to determine optimal nanofiber. The results showed that the ANN model had average goodness values of almost 1.992 which was higher than the RSM model with an amount of 1.823. The best sample was determined with the combination of parameters such as PLA/PCL (70:29) concentration, voltage 17 kV, and flow rate 0.2 ml/h in diameter of nanofiber 410 nm by Genetic Algorithm (GA) model with cost value 0.0216 that was lower than cost value (0.0927) of ANN model. The effect of NS extract on nanofibers properties showed that loading high concentrations of NS extract in PLA/PCL polymer solutions caused a decrease in nanofibers diameter, hydrophilicity, and tensile strength. Overall, PLA/PCL/NS 25 % nanofiber was selected as an optimal web with an average diameter of 370 ± 68 nm with a young modulus 5.94 MPa. This scaffold also exhibited the highest antibacterial activity, cell attachment, and cell viability based on the MTT assay.

Effect of Gelatin Coating and GO Incorporation on the Properties and Degradability of Electrospun PCL Scaffolds for Bone Tissue Regeneration

Polymer-based nanocomposites such as polycaprolactone/graphene oxide (PCL/GO) have emerged as alternatives for bone tissue engineering (BTE) applications. The objective of this research was to investigate the impact of a gelatin (Gt) coating on the degradability and different properties of PCL nanofibrous scaffolds fabricated by an electrospinning technique with 1 and 2 wt% GO. Uniform PCL/GO fibers were obtained with a beadless structure and rough surface. PCL/GO scaffolds exhibited an increase in their crystallization temperature (Tc), attributed to GO, which acted as a nucleation agent. Young's modulus increased by 32 and 63% for the incorporation of 1 and 2 wt% GO, respectively, in comparison with neat PCL. A homogeneous Gt coating was further applied to these fibers, with incorporations as high as 24.7 wt%. The introduction of the Gt coating improved the hydrophilicity and degradability of the scaffolds. Bioactivity analysis revealed that the hydroxyapatite crystals were deposited on the Gt-coated scaffolds, which made them different from their uncoated counterparts. Our results showed the synergic effect of Gt and GO in enhancing the multifunctionality of the PCL, in particular the degradability rate, bioactivity, and cell adhesion and proliferation of hGMSC cells, making it an interesting biomaterial for BTE.

Investigation of physical, mechanical and biological properties of polyhydroxybutyrate-chitosan/graphene oxide nanocomposite scaffolds for bone tissue engineering applications

Mechanical properties appropriate to native tissues, as an essential component in bone tissue engineering scaffolds, plays a significant role in tissue formation. In the current study, Poly-3 hydroxybutyrate-chitosan (PC) scaffolds reinforced with graphene oxide (GO) were made by the electrospinning method. The addition of GO led to a decrease in fibers diameter, an increase in thermal capacity and an improvement in the surface hydrophilicity of nanocomposite scaffolds. A significant increase in the mechanical properties of PC/GO (PCG) nanocomposite scaffolds was achieved due to the inherent strength of GO as well as its uniform dispersion throughout the polymeric matrix owing to hydrogen bonding and polar interactions. Also, lower biological degradation of the scaffolds (~30% in 100 days) due to the presence of GO provides essential mechanical support for bone regeneration. In addition, the bioactivity results showed that GO reinforcement significantly increases the biomineralization on the surface of the scaffolds. Evaluating cell adhesion and proliferation, as well as ALP activity of MG-63 cells on PC and PCG scaffolds indicated the positive effect of GO on scaffolds' biocompatibility. Overall, the improvement of physicochemical, mechanical, and biological properties of GO-reinforced scaffolds shows the potential of PCG nanocomposite scaffolds for bone tissue engineering.

PCL/Gelatin/Graphene Oxide Electrospun Nanofibers: Effect of Surface Functionalization on In Vitro and Antibacterial Response

The emergence of resistance to pathogenic bacteria has resulted from the misuse of antibiotics used in wound treatment. Therefore, nanomaterial-based agents can be used to overcome these limitations. In this study, polycaprolactone (PCL)/gelatin/graphene oxide electrospun nanofibers (PGO) are functionalized via plasma treatment with the monomeric groups diallylamine (PGO-M1), acrylic acid (PGO-M2), and tert-butyl acrylate (PGO-M3) to enhance the action against bacteria cells. The surface functionalization influences the morphology, surface wettability, mechanical properties, and thermal stability of PGO nanofibers. PGO-M1 and PGO-M2 exhibit good antibacterial activity against Staphylococcus aureus and Escherichia coli, whereas PGO-M3 tends to reduce their antibacterial properties compared to PGO nanofibers. The highest proportion of dead bacteria cells is found on the surface of hydrophilic PGO-M1, whereas live cells are colonized on the surface of hydrophobic PGO-M3. Likewise, PGO-M1 shows a good interaction with L929, which is confirmed by the high levels of adhesion and proliferation with respect to the control. All the results confirm that surface functionalization can be strategically used as a tool to engineer PGO nanofibers with controlled antibacterial properties for the fabrication of highly versatile devices suitable for different applications (e.g., health, environmental pollution).

Graphene Family Nanomaterials for Stem Cell Neurogenic Differentiation and Peripheral Nerve Regeneration

Stem cells play a critical role in peripheral nerve regeneration. Nerve scaffolds fabricated by specific materials can help induce the neurogenic differentiation of stem cells. Therefore, it is a potential strategy to enhance therapeutic efficiency. Graphene family nanomaterials are widely applied in repairing peripheral nerves. However, the mechanism underlying the pro-regeneration effects remains elusive. In this review, we first discuss the properties of graphene family nanomaterials, including monolayer and multilayer graphene, few-layer graphene, graphene oxide, reduced graphene oxide, and graphene quantum dots. We also introduce their applications in regulating stem cell differentiation. Then, we review the potential mechanisms of the neurogenic differentiation of stem cells facilitated by the materials. Finally, we discuss the existing challenges in this field to advance the development of nerve biomaterials.

Proliferation and differentiation study of melatonin functionalized polycaprolactone/gelatin electrospun fibrous scaffolds for nerve tissue engineering

Melatonin (MLT), a pineal neurohormone with multiple neuroprotective, is often used for peripheral nerve recovery and regenerated nerve proliferation. In this study, Polycaprolactone/Gelatin (PG) fibrous electrospun scaffolds with various percentages of MLT (0, 1, 2, and 4%wt) were fabricated for nerve cell growth, the effects of different concentrations of MLT within PG fibers (PG, PGMLT1, PGMLT2, and PGMLT4) on the proliferation and differentiation for PC12 cells were quantitatively evaluated. The microstructures and morphologies of these scaffolds were analyzed by FE-SEM and digital camera. Fourier transform infrared spectrometer (FTIR), X-ray photoelectron spectroscopy (XPS), and Water Contact Angle (WCA) were used to study the composition, ratio and properties of MLT functionalized PG scaffolds. MTT and CLSM analysis showed that appropriate amount of MLT was beneficial to the proliferation of PC12 cell. MLT can also promote cell differentiation, neurite germination, the expression levels of MAP2 mRNA and protein were dramatically increased on the composite scaffolds with the increase of MLT content, moderate addition of MLT (PGMLT2, 2%) had a prominent enhancement for neurite length. This work would provide a more comprehensive reference for further researches on MLT functionalized composite scaffolds and suggest that high-performance PGMLT fibrous scaffolds could be a promising alternative for nerve repair.

Adsorption of Carbon Dioxide with Ni-MOF-74 and MWCNT Incorporated Poly Acrylonitrile Nanofibers

Among the new adsorbent forms, nanofiber structures have attracted extra attention because of features such as high surface area, controllable properties, and fast kinetics. The objective of this study is to produce the polyacrylonitrile (PAN) electrospun nanofibers loaded with Ni-MOF-74/MWCNT to obtain maximum CO₂ adsorption. The prepared PAN/MWCNT/MOF nanofiber based on the Box–Behnken design (BBD) model suggests the CO₂ adsorption of about 1.68 mmol/g (at 25 °C and 7 bar) includes 14.61 w/v%, 1.43 w/w%, and 11.9 w/w% for PAN, MWCNT, and MOF, respectively. The results showed the effective CO₂ adsorption of about 1.65 ± 0.03 mmol/g (BET = 65 m²/g, pore volume = 0.08 cm³/g), which proves the logical outcomes of the chosen model. The prepared PAN/MWCNT/MOF nanofiber was characterized using different analyzes such as SEM, TEM, TG, XRD, FTIR, and N₂ adsorption–desorption isotherms. More MOF mass loading on the nanofiber surface via secondary growth method resulted in 2.83 mmol/g (BET = 353 m²/g, pore volume = 0.22 cm³/g, 43% MOF mass loading) and 4.35 mmol/g (BET = 493 m²/g, pore volume = 0.27 cm³/g, 65% MOF mass loading) CO₂ adsorption at 7 bar for the first and second growth cycles, respectively. This indicates that secondary growth is more effective in the MOF loading amount and, consequently, adsorption capacity compared to the MOF loading during electrospinning.

Electrospun Nanofibrous Membranes Based on Citric Acid-Functionalized Chitosan Containing rGO-TEPA with Potential Application in Wound Dressings

The present research work is focused on the design and investigation of electrospun composite membranes based on citric acid-functionalized chitosan (CsA) containing reduced graphene oxide-tetraethylene pentamine (CsA/rGO-TEPA) as materials with opportune bio-properties for applications in wound dressings. The covalent functionalization of chitosan (CS) with citric acid (CA) was achieved through the EDC/NHS coupling system and was checked by 1H-NMR spectroscopy and FTIR spectrometry. The mixtures to be electrospun were formulated by adding three concentrations of rGO-TEPA into the 1/1 (w/w) CsA/poly (ethylene oxide) (PEO) solution. The effect of rGO-TEPA concentration on the morphology, wettability, thermal stability, cytocompatibility, cytotoxicity, and anti-biofilm activity of the nanofibrous membranes was extensively investigated. FTIR and Raman results confirmed the covalent and non-covalent interactions that appeared between the system's compounds, and the exfoliation of rGO-TEPA sheets within the CsA in the presence of PEO (CsA/P) polymer matrix, respectively. SEM analysis emphasized the nanofibrous architecture of membranes and the presence of rGO-TEPA sheets entrapped into the CsA nanofiber structure. The MTT cellular viability assay showed a good cytocompatibility with the highest level of cell development and proliferation registered for the CsA/P composite nanofibrous membrane with 0.250 wt.% rGO-TEPA. The designed nanofibrous membranes could have potential applications in wound dressings, given that they showed a good anti-biofilm activity against Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus bacterial strains.

Enhanced mechanical properties and electrical conductivity of Chitosan/Polyvinyl Alcohol electrospun nanofibers by incorporation of graphene nanoplatelets

The subject of this paper is to develop a highly conductive Graphene nanoplatelets (GNPs)-Chitosan (CS)/Polyvinyl Alcohol (PVA) (GNPs-CP) nanofibers with excellent mechanical properties. An experimental study was designed to produce nanofibers based on CP nanofibers as matrix and GNPs as reinforcement materials. The microstructure and the surface morphology of the electrospun nanofibers along with their electrical and mechanical properties were examined to study the effect of GNPs content. The SEM results showed that the gradual increase in GNPs content led to a porous web like morphology with no bead. There is a decrease in the diameter of nanofibers by increasing the concentration of GNPs to 1 wt% GNPs from 370 ± 40 nm for CP blend to 144 ± 18 nm for 1 wt% GNPs. Transmission electron microscopy results depicted that GNPs were dispersed uniformly confirmed by the absence of characteristic peak of graphite at 2θ = 26.5°. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy results indicate the occurrence of a few interactions between GNPs and CP matrix. Nitrogen adsorption/desorption measurement demonstrated that increasing GNPs content increased the specific surface area of nanofibers from 238.377 to 386.708 m²/g for 0 and 1 wt% GNPs content. The test results also show that the presence of GNPs considerably enhances tensile strength, elastic modulus and electrical conductivity. Furthermore, the toughness of GNPs-CP nanofibers including 1 wt% GNPs significantly improved (12-fold) compared to the one for CP nanofibers. So, the proposed composite provides a decent functionality for nanofibers as scaffolds in tissue engineering applications.

Functionalized Antimicrobial Nanofibers: Design Criteria and Recent Advances

The rise of antibiotic resistance has become a major threat to human health and it is spreading globally. It can cause common infectious diseases to be difficult to treat and leads to higher medical costs and increased mortality. Hence, multifunctional polymeric nanofibers with distinctive structures and unique physiochemical properties have emerged as a neo-tool to target biofilm and overcome deadly bacterial infections. This review emphasizes electrospun nanofibers' design criteria and properties that can be utilized to enhance their therapeutic activity for antimicrobial therapy. Also, we present recent progress in designing the surface functionalization of antimicrobial nanofibers with non-antibiotic agents for effective antibacterial therapy. Lastly, we discuss the future trends and remaining challenges for polymeric nanofibers.

The Drug Release Kinetics and Anticancer Activity of the GO/PVA-Curcumin Nanostructures: The Effects of the Preparation Method and the GO Amount

The Graphene Oxide (GO) incorporated polyvinyl alcohol/sodium alginate (PVA-SA) composites with curcumin were prepared by the solvent casting and electro-spinning techniques. The GO was incorporated into PVA-SA nano-fiber and film matrixes, and the performance of these nano-composites as drug carriers was investigated. The effects of production method (film or mat) and GO amount on the water absorption properties and delivery of curcumin behaviors were investigated. The swelling and releasing were studied at the specific interval times in deionized water and phosphate buffer solution (pH = 7.4), respectively. The release kinetics was evaluated to find a suitable mechanism of the release. Finally, the anticancer activity of composite nano-fibers on the cancer cells was investigated. The XRD and FTIR analyses confirmed nanocomposites structures, and the successful incorporation was shown by scanning electron microscopy (SEM). The results showed that addition of the GO to PVA/SA decreased swelling ratio of the films (up to 31%) and increased the swelling ratio of the mats (up to 37.5%). However, for both film and mat, increasing of the GO amount reduced the curcumin release. Drug release decreasing up to 22.5% was observed for film, while a very high release decreasing up to about 70% was seen for mat. Also, both film and mat structures showed significant anti-cancer activity on MCF-7 cells. The lower cell viability was about 40 and 30% for film and mat, respectively. The kinetics evaluations suggested a Korsmeyer-Peppas model and Fickian controlled drug release.

3D-printed cryomilled poly(ε-caprolactone)/graphene composite scaffolds for bone tissue regeneration

In this study, composite scaffolds based on poly(caprolactone) (PCL) and non-covalently functionalized few-layer graphene (FLG) were manufactured by an extrusion-based system for the first time. For that, functionalized FLG powder was obtained through the evaporation of a functionalized FLG aqueous suspension prepared from a graphite precursor. Cryomilling was shown to be an efficient mixing method, producing a homogeneous dispersion of FLG particles onto the PCL polymeric matrix. Thereafter, fused deposition modeling (FDM) was used to print 3D scaffolds and their morphology, thermal, biodegradability, mechanical, and cytotoxicity properties were analysed. The presence of functionalized FLG demonstrated to induce slight changes in the microstructure of the scaffold, did not affect the thermal stability and enhanced significantly the compressive modulus. The composite scaffolds presented a porosity of around 40% and a mean pore size in the range of 300 μm. The cell viability and proliferation of SaOs-2 cells were assessed and the results showed good cell viability and long-term proliferation onto produced composite scaffolds. Therefore, these new FLG/PCL scaffolds comprised adequate morphological, thermal, mechanical, and biological properties to be used in bone tissue regeneration.

Efficient co-cultivation of human fibroblast cells (HFCs) and adipose-derived stem cells (ADSs) on gelatin/PLCL nanofiber

In this study, we investigated whether the nanofibers produced by natural-synthetic polymers can probably promote the proliferation of co-cultured adipose-derived stem cells/human fibroblast cells (ADSs/HFCs) and synthesis of collagen. Nanofiber was fabricated by blending gelatin and poly (L-lactide co-ɛ-caprolactone) (PLCL) polymer nanofiber (Gel/PLCL). Cell morphology and the interaction between cells and Gel/PLCL nanofiber were evaluated by FESEM and fluorescent microscopy. MTS assay and quantitative real-time polymerase chain reaction were applied to assess the proliferation of co-cultured ADSs/HFCs and the collagen type I and III synthesis, respectively. The concentrations of two cytokines including fibroblast growth factor-basic and transforming growth factor-β1 were also measured in culture medium of co-cultured ADSs/HDCs using enzyme-linked immunosorbent assay assay. Actually, nanofibers exhibited proper structural properties in terms of stability in cell proliferation and toxicity analysis processes. Gel/PLCL nanofiber promoted the growth and the adhesion of HFCs. Our results showed in contact co-culture of ADSs/HFCs on the Gel/PLCL nanofiber increased cellular adhesion and proliferation synergistically compared to non-coated plate. Also, synthesis of collagen and cytokines secretion of co-cultured ADSs/HFCs on Gel/PLCL scaffolds is significantly higher than non-coated plates. To conclude, the results suggest that Gel/PLCL nanofiber can imitate physiological characteristics in vivo and enhance the efficacy of co-cultured ADSs/HFCs in wound healing process.

Triboelectric nanogenerators based on graphene oxide coated nanocomposite fibers for biomedical applications

A high demand for green and eco-friendly triboelectric nanogenerators (TENGs) has multiplied the importance of their degradability for biomedical applications. However, the charge generation of current eco-friendly TENGs is generally limited. In this research, a flexible TENG based on a silk fibroin (SF) fibrous layer and a polycaprolactone (PCL)/graphene oxide (GO) fibrous layer was developed. Moreover, the PCL/GO layer was surface modified using various concentrations of GO (0, 1.5, 3, 6, and 9 wt%). We demonstrated that surface modification using GO nanosheets significantly improved the output of the TENG. Notably, the optimized GO modified layer resulted in a voltage of 100 V, a current of 3.15 mA [Formula: see text], and a power density of 72 mW[Formula: see text]. Moreover, a thin PCL layer applied as an encapsulation layer did not significantly modulate the performance of the TENG. Furthermore, during 28 d of soaking in a phosphate buffer solution, the proposed TENG was able to successfully generate electricity. The TENG was also proposed to be used for the electrical stimulation of PC12 cells. The results confirmed that this self-powered electrical stimulator could promote the attachment and proliferation of PC12 cells. Therefore, we have shown the potential for an eco-friendly and cost-effective TENG based on GO modified PCl/GO and silk fibrous layers to be used as a power source for biomedical applications.

3D Reduced Graphene Oxide Scaffolds with a Combinatorial Fibrous-Porous Architecture for Neural Tissue Engineering

Graphene oxide (GO) assists a diverse set of promising routes to build bioactive neural microenvironments by easily interacting with other biomaterials to enhance their bulk features or, alternatively, self-assembling toward the construction of biocompatible systems with specific three-dimensional (3D) geometries. Herein, we first modulate both size and available oxygen groups in GO nanosheets to adjust the physicochemical and biological properties of polycaprolactone-gelatin electrospun nanofibrous systems. The results show that the incorporation of customized GO nanosheets modulates the properties of the nanofibers and, subsequently, markedly influences the viability of neural progenitor cell cultures. Interestingly, the partially reduced GO (rGO) nanosheets with larger dimensions trigger the best cell response, while the rGO nanosheets with smaller size provoke an accentuated decrease in the cytocompatibility of the resulting electrospun meshes. Then, the most auspicious nanofibers are synergistically accommodated onto the surface of 3D-rGO heterogeneous porous networks, giving rise to fibrous-porous combinatorial architectures suitable for enhancing adhesion and differentiation of neural cells. By varying the chemical composition of the nanofibers, it is possible to adapt their performance as physical crosslinkers for the rGO sheets, leading to the modulation of both pore size and structural/mechanical integrity of the scaffold. Importantly, the biocompatibility of the resultant fibrous-porous systems is not compromised after 14 days of cell culture, including standard differentiation patterns of neural progenitor cells. Overall, in light of these in vitro results, the reported scaffolding approach presents not only an indisputable capacity to support highly viable and interconnected neural circuits but also the potential to unlock novel strategies for neural tissue engineering applications.

Graphene impregnated electrospun nanofiber sensing materials: a comprehensive overview on bridging laboratory set-up to industry

Owing to the unique structural characteristics as well as outstanding physio-chemical and electrical properties, graphene enables significant enhancement with the performance of electrospun nanofibers, leading to the generation of promising applications in electrospun-mediated sensor technologies. Electrospinning is a simple, cost-effective, and versatile technique relying on electrostatic repulsion between the surface charges to continuously synthesize various scalable assemblies from a wide array of raw materials with diameters down to few nanometers. Recently, electrospun nanocomposites have emerged as promising substrates with a great potential for constructing nanoscale biosensors due to their exceptional functional characteristics such as complex pore structures, high surface area, high catalytic and electron transfer, controllable surface conformation and modification, superior electric conductivity and unique mat structure. This review comprehends graphene-based nanomaterials (GNMs) (graphene, graphene oxide (GO), reduced GO and graphene quantum dots) impregnated electrospun polymer composites for the electro-device developments, which bridges the laboratory set-up to the industry. Different techniques in the base polymers (pre-processing methods) and surface modification methods (post-processing methods) to impregnate GNMs within electrospun polymer nanofibers are critically discussed. The performance and the usage as the electrochemical biosensors for the detection of wide range analytes are further elaborated. This overview catches a great interest and inspires various new opportunities across a wide range of disciplines and designs of miniaturized point-of-care devices.

Polycaprolactone/Gelatin/Hyaluronic Acid Electrospun Scaffolds to Mimic Glioblastoma Extracellular Matrix

Glioblastoma (GBM), one of the most malignant types of human brain tumor, is resistant to conventional treatments and is associated with poor survival. Since the 3D extracellular matrix (ECM) of GBM microenvironment plays a significant role on the tumor behavior, the engineering of the ECM will help us to get more information on the tumor behavior and to define novel therapeutic strategies. In this study, polycaprolactone (PCL)/gelatin(Gel)/hyaluronic acid(HA) composite scaffolds with aligned and randomly oriented nanofibers were successfully fabricated by electrospinning for mimicking the extracellular matrix of GBM tumor. We investigated the effect of nanotopography and components of fibers on the mechanical, morphological, and hydrophilic properties of electrospun nanofiber as well as their biocompatibility properties. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) have been used to investigate possible interactions between components. The mean fiber diameter in the nanofiber matrix was increased with the presence of HA at low collector rotation speed. Moreover, the rotational velocity of the collector affected the fiber diameters as well as their homogenous distribution. Water contact angle measurements confirmed that hyaluronic acid-incorporated aligned nanofibers were more hydrophilic than that of random nanofibers. In addition, PCL/Gel/HA nanofibrous scaffold (7.9 MPa) exhibited a significant decrease in tensile strength compared to PCL/Gel nanofibrous mat (19.2 MPa). In-vitro biocompatibilities of nanofiber scaffolds were tested with glioblastoma cells (U251), and the PCL/Gel/HA scaffolds with random nanofiber showed improved cell adhesion and proliferation. On the other hand, PCL/Gel/HA scaffolds with aligned nanofiber were found suitable for enhancing axon growth and elongation supporting intracellular communication. Based on these results, PCL/Gel/HA composite scaffolds are excellent candidates as a biomimetic matrix for GBM and the study of the tumor.

Characterization of polycaprolactone/rGO nanocomposite scaffolds obtained by electrospinning

The incorporation of nanoparticles inside polymeric matrices has led to the development of multifunctional composites necessary to repair human tissues. The addition of nanoparticles may improve the properties of the composite materials such as surface area, mechanical properties, flexibility, hydrophilicity, electrical conductivity, etc. These properties can help in cellular growth, proliferation and/or differentiation. In this work, scaffolds of polycaprolactone (PCL) and reduced graphite oxide (rGO) were built by electrospinning technique. The ratios of rGO/PCL employed were 0.25, 0.5, 0.75 and 1 wt%. Two different voltage setup (10 and 15 kV) and distance of 10 cm were used for electrospinning. Thermal, mechanical, morphological, electrical, porosity and absorption water tests were made to the scaffolds. Samples electrospun at 10 kV with rGO showed improvement in mechanical properties with an increase of 190% of Young's Modulus in comparison with sample without rGO. Furthermore, samples electrospun at 15 kV showed an important deterioration with the addition of rGO but had an increase in the electrical conductivity and porosity. Overall, the addition of 0.75 and 1 wt% of rGO led to a detriment on properties due to formation of aggregates. The voltage on the electrospinning process plays a very important role in the final properties of the nanocomposites scaffolds of PCL-rGO.

Graphene oxide incorporated polycaprolactone/chitosan/collagen electrospun scaffold: Enhanced osteogenic properties for bone tissue engineering

This in vitro study aimed to evaluate the physicochemical and biological activity of the polycaprolactone/chitosan/collagen scaffolds incorporated with 0, 0.5, 3, and 6 wt% of graphene oxide (GO). Using standard tests and MG-63 cells, the characteristics of scaffolds were evaluated, and the behavior of osteoblasts were simulated, respectively. A non-significant decrease in nanofibers diameter was noted in scaffolds with a higher ratio of GO. The hydrophilicity and bioactivity of the scaffold surface, as well as cell attachment and proliferation, increased in correspondence to an increase in GO. The higher ratio of GO also improved the osteogenesis activity. GO increased the degradation rate, but it was negligible and seemed not enough to endanger stability. Modifying the scaffolds with GO did not make a significant change to the antibacterial effect.

Morphology and Properties of Electrospun PCL and Its Composites for Medical Applications: A Mini Review

Polycaprolactone (PCL) is one of the most used synthetic polymers for medical applications due to its biocompatibility and slow biodegradation character. Combining the inherent properties of the PCL matrix with the characteristic of nanofibrous particles, result into promising materials that can be suitable for different applications, including the biomedical applications. The advantages of nanofibrous structures include large surface area, a small diameter of pores and a high porosity, which make them of great interest in different applications. Electrospinning, as technique, has been heavily used for the preparation of nano- and micro-sized fibers. This review discusses the different methods for the electrospinning of PCL and its composites for advanced applications. Furthermore, the steady state conditions as well as the effect of the electrospinning parameters on the resultant morphology of the electrospun fiber are also reported.

Characteristics and toxicity assessment of electrospun gelatin/PCL nanofibrous scaffold loaded with graphene in vitro and in vivo

Background: Electrospun gelatin/polycaprolactone (Gt/PCL) nanofibrous scaffolds loaded with graphene are novel nanomaterials with the uniquely strong property of electrical conductivity, which have been widely investigated for their potential applications in cardiovascular tissue engineering, including in bypass tracts for atrioventricular block.

Purpose: Electrospun Gt/PCL/graphene nanofibrous mats were successfully produced. Scanning electron micrography showed that the fibers with graphene were smooth and homogeneous. In vitro, to determine the biocompatibility of the scaffolds, hybrid scaffolds with different fractions of graphene were seeded with neonatal rat ventricular myocytes. In vivo, Gt/PCL scaffolds with different concentrations of graphene were implanted into rats for 4, 8 and 12 weeks.

Results: CCK-8 assays and histopathological staining (including DAPI, cTNT, and CX43) indicated that cells grew and survived well on the hybrid scaffolds if the mass fraction of graphene was lower than 0.5%. After implanting into rats for 4, 8 or 12 weeks, there was no gathering of inflammatory cells around the nanomaterials according to the HE staining results.

Conclusion: The results indicate that Gt/PCL nanofibrous scaffolds loaded with graphene have favorable electrical conductivity and biological properties and may be suitable scaffolds for use in the treatment of atrioventricular block. These findings alleviate safety concerns and provide novel insights into the potential applications of Gt/PCL loaded with graphene, offering a solid foundation for comprehensive in vivo studies.

Smart electrospun nanofibers containing PCL/gelatin/graphene oxide for application in nerve tissue engineering

Currently graphene-doped electrospun scaffolds have been a matter of great interest to be exploited in biomedical fields such as tissue engineering and drug delivery applications. The main objective of this paper is to evaluate the effect of graphene on biological properties of PCL/gelatin nanofibrous mats. SEM analysis was conducted to investigate the morphology of the electrospun nanofibers. The in-vitro cellular proliferation of PC12 cells on nanofibrous web was also investigated. Electrospun PCL/gelatin/graphene nanofibrous mats exhibited 99% antibacterial properties against gram-positive and gram-negative bacteria. Drug release studies indicated that the π-π stacking interaction between TCH and graphene has led to the far better controlled release of TCH from electrospun PCL/gelatin/graphene compared to PCL/gelatin nanofibrous scaffolds. These superior properties along with an improvement in hydrophilicity and biodegradation features has made the nanofibers a promising candidate to be used as electrically conductive scaffolds in neural tissue engineering as well as controlled drug delivery.

Hierarchically aligned fibrous hydrogel films through microfluidic self-assembly of graphene and polysaccharides

Despite significant interest in developing extracellular matrix (ECM)-inspired biomaterials to recreate native cell-instructive microenvironments, the major challenge in the biomaterial field is to recapitulate the complex structural and biophysical features of native ECM. These biophysical features include multiscale hierarchy, electrical conductivity, optimum wettability, and mechanical properties. These features are critical to the design of cell-instructive biomaterials for bioengineering applications such as skeletal muscle tissue engineering. In this study, we used a custom-designed film fabrication assembly, which consists of a microfluidic chamber to allow electrostatic charge-based self-assembly of oppositely charged polymer solutions forming a hydrogel fiber and eventually, a nanocomposite fibrous hydrogel film. The film recapitulates unidirectional hierarchical fibrous structure along with the conductive properties to guide initial alignment and myotube formation from cultured myoblasts. We combined high conductivity, and charge carrier mobility of graphene with biocompatibility of polysaccharides to develop graphene-polysaccharide nanocomposite fibrous hydrogel films. The incorporation of graphene in fibrous hydrogel films enhanced their wettability, electrical conductivity, tensile strength, and toughness without significantly altering their elastic properties (Young's modulus). In a proof-of-concept study, the mouse myoblast cells (C2C12) seeded on these nanocomposite fibrous hydrogel films showed improved spreading and enhanced myogenesis as evident by the formation of multinucleated myotubes, an early indicator of myogenesis. Overall, graphene-polysaccharide nanocomposite fibrous hydrogel films provide a potential biomaterial to promote skeletal muscle tissue regeneration.

Neurogenic Differentiation of Human Dental Pulp Stem Cells on Graphene-Polycaprolactone Hybrid Nanofibers

Stem cells derived from dental tissues—dental stem cells—are favored due to their easy acquisition. Among them, dental pulp stem cells (DPSCs) extracted from the dental pulp have many advantages, such as high proliferation and a highly purified population. Although their ability for neurogenic differentiation has been highlighted and neurogenic differentiation using electrospun nanofibers (NFs) has been performed, graphene-incorporated NFs have never been applied for DPSC neurogenic differentiation. Here, reduced graphene oxide (RGO)-polycaprolactone (PCL) hybrid electrospun NFs were developed and applied for enhanced neurogenesis of DPSCs. First, RGO-PCL NFs were fabricated by electrospinning with incorporation of RGO and alignments, and their chemical and morphological characteristics were evaluated. Furthermore, in vitro NF properties, such as influence on the cellular alignments and cell viability of DPSCs, were also analyzed. The influences of NFs on DPSCs neurogenesis were also analyzed. The results confirmed that an appropriate concentration of RGO promoted better DPSC neurogenesis. Furthermore, the use of random NFs facilitated contiguous junctions of differentiated cells, whereas the use of aligned NFs facilitated an aligned junction of differentiated cells along the direction of NF alignments. Our findings showed that RGO-PCL NFs can be a useful tool for DPSC neurogenesis, which will help regeneration in neurodegenerative and neurodefective diseases.