Instrumental methods and techniques for structural and physicochemical characterization of biomaterials and bone tissue: A review

Polysaccharide-Based Coatings as Drug Delivery Systems

Therapeutic polysaccharide-based coatings have recently emerged as versatile strategies to transform a conventional medical implant into a drug delivery system. However, the translation of these polysaccharide-based coatings into the clinic as drug delivery systems still requires a deeper understanding of their drug degradation/release profiles. This claim is supported by little or no data. In this review paper, a comprehensive description of the benefits and challenges generated by the polysaccharide-based coatings is provided. Moreover, the latest advances made towards the application of the most important representative coatings based on polysaccharide types for drug delivery are debated. Furthermore, suggestions/recommendations for future research to speed up the transition of polysaccharide-based drug delivery systems from the laboratory testing to clinical applications are given.

Surface Modification of Ti6Al4V ELI Titanium Alloy by Poly(ethylene-alt-maleic anhydride) and Risedronate Sodium

With the simultaneous increase in the number of endoprostheses being performed, advances in the field of biomaterials are becoming apparent-whereby the materials and technologies used to construct implants clearly improve the implants' quality and, ultimately, the life of the patient after surgery. The aim of this study was to modify the titanium alloy Ti6Al4V ELI used in the construction of hip joint endoprostheses. This is why the continuous development of biomaterials is so important. This paper presents the results of research for a new application of polymer poly(ethylene-alt-maleic anhydride) as a drug release layer, placed on the surface of a titanium alloy. The obtained layers were analyzed using Raman spectroscopy (spectra and maps), Fourier transform infrared spectroscopy (spectra and maps), contact angle measurements as well as scanning electron microscopy and energy dispersive spectroscopy imaging and topography analysis. The results confirmed that the polymer layer obtained on the plate surface after the alkali heat treatment process is much better-it binds much more polymer and thus the applied drug. In addition, a longer and more gradual release of the drug was observed for the alkali heat treatment modification than for H2O2 solution.

The translational paradigm of nanobiomaterials: Biological chemistry to modern applications

Recently nanotechnology has evolved as one of the most revolutionary technologies in the world. It has now become a multi-trillion-dollar business that covers the production of physical, chemical, and biological systems at scales ranging from atomic and molecular levels to a wide range of industrial applications, such as electronics, medicine, and cosmetics. Nanobiomaterials synthesis are promising approaches produced from various biological elements be it plants, bacteria, peptides, nucleic acids, etc. Owing to the better biocompatibility and biological approach of synthesis, they have gained immense attention in the biomedical field. Moreover, due to their scaled-down sized property, nanobiomaterials exhibit remarkable features which make them the potential candidate for different domains of tissue engineering, materials science, pharmacology, biosensors, etc. Miscellaneous characterization techniques have been utilized for the characterization of nanobiomaterials. Currently, the commercial transition of nanotechnology from the research level to the industrial level in the form of nano-scaffolds, implants, and biosensors is stimulating the whole biomedical field starting from bio-mimetic nacres to 3D printing, multiple nanofibers like silk fibers functionalizing as drug delivery systems and in cancer therapy. The contribution of single quantum dot nanoparticles in biological tagging typically in the discipline of genomics and proteomics is noteworthy. This review focuses on the diverse emerging applications of Nanobiomaterials and their mechanistic advancements owing to their physiochemical properties leading to the growth of industries on different biomedical measures. Alongside the implementation of such nanobiomaterials in several drug and gene delivery approaches, optical coding, photodynamic cancer therapy, and vapor sensing have been elaborately discussed in this review. Different parameters based on current challenges and future perspectives are also discussed here.

Elemental composition of primary lamellar bone differs between parous and nulliparous rhesus macaque females

Extracting life history information from mineralized hard tissues of extant and extinct species is an ongoing challenge in evolutionary and conservation studies. Primary lamellar bone is a mineralized tissue with multidien periodicity that begins deposition prenatally and continues until adulthood albeit with concurrent resorption, thus maintaining a record spanning several years of an individual's life. Here, we use field-emission scanning electron microscopy and energy-dispersive X-ray analysis to measure the relative concentrations of calcium, phosphorous, oxygen, magnesium and sodium in the femora of seven rhesus macaque with known medical and life-history information. We find that the concentration of these elements distinguishes parous from nulliparous females; that in females calcium and phosphorus are lower in bone formed during reproductive events; and that significant differences in relative magnesium concentration correlate with breastfeeding in infants.

Comparative Cytotoxic Evaluation of Zygophyllum album Root and Aerial Parts of Different Extracts and Their Biosynthesized Silver Nanoparticles on Lung A549 and Prostate PC-3 Cancer Cell Lines

The current work demonstrates a comparative study between aerial and root parts of Zygophyllum album L. The total phenolic (TPC) and flavonoid content (TFC), in addition to the antioxidant activity, of the crude extracts were investigated, where the aerial parts revealed a higher value overall. By means of UV–VIS and HPLC, rutin and caffeic acid were detected and then quantified as 5.91 and 0.97 mg/g of the plant extract, respectively. Moreover, the biosynthesis of AgNPs utilizing the crude extract of the arial parts and root of Z. album L. and the phenolic extracts was achieved in an attempt to enhance the cytotoxicity of the different plant extracts. The prepared AgNPs formulations were characterized by TEM and zeta potential measurements, which revealed that all of the formulated AgNPs were of a small particle diameter and were highly stable. The mean hydrodynamic particle size ranged from 67.11 to 80.04 nm, while the zeta potential ranged from 29.1 to 38.6 mV. Upon biosynthesis of the AgNPs using the extracts, the cytotoxicity of the tested samples was improved, so the polyphenolics AgNPs of the aerial parts exhibited a potent cytotoxicity against lung A549 and prostate PC-3 cancer cells with IC₅₀ values of 6.1 and 4.36 µg/mL, respectively, compared with Doxorubicin (IC₅₀ values of 6.19 and 5.13 µg/mL, respectively). Regarding the apoptotic activity, polyphenolics AgNPs of the aerial parts induced apoptotic cell death by 4.2-fold in PC-3 and 4.7-fold in A549 cells compared with the untreated control. The mechanism of apoptosis in both cancerous cells appeared to be via the upregulation proapoptotic genes; p53, Bax, caspase 3, 8, and 9, and the downregulation of antiapoptotic gene, Bcl-2. Hence, this formula may serve as a good source for anticancer agents against PC-3 and A549 cells.

Comparison of structural and antioxidant activity of polysaccharide extracted from truffles

As the main component of truffles, polysaccharides have a variety of biological activities such as anti-oxidation, anti-tumor, and hypoglycemic activity, and these activities are closely related to its structure. In this study, Tuber Aestivum crude polysaccharide (TACP) and Tuber Melanosporum crude polysaccharide (TMCP) were obtained from Tuber Aestivum and Tuber Melanosporum by using microwave-assisted hot water, and then the Sephadex G-200 column was utilized to further separate and purify Tuber Aestivum polysaccharide (TAP) and Tuber Melanosporum polysaccharide (TMP) from TACP and TMCP. The structural characterization results showed that the molecular weight of TAP was 2.18 × 10⁴  kDa, while TMP was 8.79 × 10³  kDa. Although the two polysaccharide components were mainly composed of mannose (Man) and glucose (Glc), the molar ratio of Man and Glc in TAP was 14.76: 12.31, with a molar ratio of 5.43:10.94 in TMP. Furthermore, the antioxidant activity of two polysaccharide components was evaluated. TAP and TMP could protect porcine jejunal epithelial (IPEC-J2) cells from oxidative damage by H₂ O₂ , but TAP exhibited stronger antioxidant effects. It was mainly reflected that TAP could increase the secretion level of intracellular antioxidant enzymes (superoxide dismutase and catalase) in IPEC-J2 cells, and had a significant effect on the total antioxidant capacity of cells. The reactive oxygen species and malondialdehyde had better scavenging ability at the concentration of 20 µg/ml. The difference between TAP and TMP may be due to the dissimilar structure. Its structure-activity relationship needs further study. PRACTICAL APPLICATION: The structure of TAP and TMP were different, and TAP had higher molecular weight. Besides, TAP and TMP can protect IPEC-J2 cells from oxidative stress, providing a theoretical basis for developing potential antioxidant drugs of practical significance.

Phyto-Phospholipid Conjugated Scorpion Venom Nanovesicles as Promising Carrier That Improves Efficacy of Thymoquinone against Adenocarcinoma Human Alveolar Basal Epithelial Cells

Lung cancer is a dangerous type of cancer in men and the third leading cause of cancer-related death in women, behind breast and colorectal cancers. Thymoquinone (THQ), a main compound in black seed essential oils, has a variety of beneficial effects, including antiproliferative, anti-inflammatory, and antioxidant properties. On the other hand, scorpion venom peptides (SV) induce apoptosis in the cancer cells, making it a promising anticancer agent. THQ, SV, and Phospholipon^® 90H (PL) were incorporated in a nano-based delivery platform to assess THQ’s cellular uptake and antiproliferative efficacy against a lung cancer cell line derived from human alveolar epithelial cells (A549). Several nanovesicles were prepared and optimized using factorial experimental design. The optimized phytosome formulation contained 79.0 mg of PL and 170.0 mg of SV, with vesicle size and zeta potential of 209.9 nm and 21.1 mV, respectively. The IC50 values revealed that A549 cells were significantly more sensitive to the THQ formula than the plain formula and THQ. Cell cycle analysis revealed that THQ formula treatment resulted in significant cell cycle arrest at the S phase, increasing cell population in this phase by 22.1%. Furthermore, the THQ formula greatly increased cell apoptosis (25.17%) when compared to the untreated control (1.76%), plain formula (11.96%), or THQ alone (13.18%). The results also indicated that treatment with THQ formula significantly increased caspase-3, Bax, Bcl-2, and p53 mRNA expression compared to plain formula and THQ. In terms of the inflammatory markers, THQ formula significantly reduced the activity of TNF-α and NF-κB in comparison with the plain formula and THQ only. Overall, the findings from the study proved that a phytosome formulation of THQ could be a promising therapeutic approach for the treatment of lung adenocarcinoma.

Production and Characterization of a 316L Stainless Steel/β-TCP Biocomposite Using the Functionally Graded Materials (FGMs) Technique for Dental and Orthopedic Applications

Metallic biomaterials are widely used for implants and dental and orthopedic applications due to their good mechanical properties. Among all these materials, 316L stainless steel has gained special attention, because of its good characteristics as an implantable biomaterial. However, the Young’s modulus of this metal is much higher than that of human bone (~193 GPa compared to 5–30 GPa). Thus, a stress shielding effect can occur, leading the implant to fail. In addition, due to this difference, the bond between implant and surrounding tissue is weak. Already, calcium phosphate ceramics, such as beta-tricalcium phosphate, have shown excellent osteoconductive and osteoinductive properties. However, they present low mechanical strength. For this reason, this study aimed to combine 316L stainless steel with the beta-tricalcium phosphate ceramic (β-TCP), with the objective of improving the steel’s biological performance and the ceramic’s mechanical strength. The 316L stainless steel/β-TCP biocomposites were produced using powder metallurgy and functionally graded materials (FGMs) techniques. Initially, β-TCP was obtained by solid-state reaction using powders of calcium carbonate and calcium phosphate. The forerunner materials were analyzed microstructurally. Pure 316L stainless steel and β-TCP were individually submitted to temperature tests (1000 and 1100 °C) to determine the best condition. Blended compositions used to obtain the FGMs were defined as 20% to 20%. They were homogenized in a high-energy ball mill, uniaxially pressed, sintered and analyzed microstructurally and mechanically. The results indicated that 1100 °C/2 h was the best sintering condition, for both 316L stainless steel and β-TCP. For all individual compositions and the FGM composite, the parameters used for pressing and sintering were appropriate to produce samples with good microstructural and mechanical properties. Wettability and hemocompatibility were also achieved efficiently, with no presence of contaminants. All results indicated that the production of 316L stainless steel/β-TCP FGMs through PM is viable for dental and orthopedic purposes.

Multi-hole spherical CT scan method to characterize large quantities of bones in rats

BACKGROUND New therapeutic options are often explored in in vivo studies using animals like rats. Since rats are small, it is difficult to examine them in a computed tomography (CT) scan. This study aimed to introduce a multi-hole spherical model CT scan method as a new, fast, economical, and reliable method to characterize large quantities of rat bones at once in estimating the timing of osteoporosis in ovariectomized white rats. METHODS 50 female white rats (12 weeks old) were treated as the control group, and 40 rats of the same age were ovariectomized to establish the osteoporosis model. Sham rats were sacrificed at 13, 15, 17, 19, and 21 weeks old, while the ovariectomized rats were sacrificed at 15, 17, 19, and 21 weeks old. Afterward, tibia bones were removed, placed in the multi-hole spherical model, and characterized using a CT scan. Their characteristics were compared using a scanning electron microscope (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). RESULTS The Hounsfield unit scores resulted from the multi-hole spherical model CT scan method of tibia bones of rats were consistent with the percentage of the osteocyte cavities, canalicular diameters, and crystal size. The multi-hole spherical model CT scan method could produce 50 times more data than the SEM, TEM, or XRD. CONCLUSIONS Multi-hole spherical model CT scan was considered good and reliable in assessing bone quality parameters in rat samples simultaneously.

Electrohydrodynamic processing of natural polymers for active food packaging: A comprehensive review

The active packaging materials fabricated using natural polymers is increasing in recent years. Electrohydrodynamic processing has drawn attention in active food packaging due to its potential in fabricating materials with advanced structural and functional properties. These materials have the significant capability in enhancing food's quality, safety, and shelf-life. Through electrospinning and electrospray, fibers and particles are encapsulated with bioactive compounds for active packaging applications. Understanding the principle behind electrohydrodynamics provides fundamentals in modulating the material's physicochemical properties based on the operating parameters. This review provides a deep understanding of electrospray and electrospinning, along with their advantages and recent innovations, from food packaging perspectives. The natural polymers suitable for developing active packaging films and coatings through electrohydrodynamics are intensely focused. The critical properties of the packaging system are discussed with characterization techniques. Furthermore, the limitations and prospects for natural polymers and electrohydrodynamic processing in active packaging are summarized.

What affects the biocompatibility of polymers?

In recent decades synthetic polymers have gained increasing popularity, and nowadays they are an integral part of people's daily lives. In addition, owing to their competitive advantage and being susceptible to modification, polymers have stimulated the fast development of innovative technologies in many areas of science. Biopolymers are of particular interest in various branches of medicine, such as implantology of bones, cartilage and skin tissues as well as blood vessels. Biomaterials with such specific applications must have appropriate mechanical and strength characteristics and above all they must be compatible with the surrounding tissues, human blood and its components, i.e. exhibit high hemo- and biocompatibility, low or no thrombo- and carcinogenicity, foreign body response (host response), appropriate osteoconduction, osteoinduction and mineralization. For biocompatibility improvement many surface treatment techniques have been utilized leading to fabricate the polymer biomaterials of required properties, also at nanoscale. This review paper discusses the most important physicochemical and biological factors that affect the biocompatibility, thus the reaction of the living organism after insertion of the polymer-based biomaterials, i.e. surface modification and/or degradation, surface composition (functional groups and charge), size and shapes, hydrophilic-hydrophobic character, wettability and surface free energy, topography (roughness, stiffness), crystalline and amorphous structure, nanostructure, cell adhesion and proliferation, cellular uptake. Particularly, the application of polysaccharides (chitosan, cellulose, starch) in the tissue engineering is emphasized.

Peak force tapping atomic force microscopy for advancing cell and molecular biology

The advent of atomic force microscopy (AFM) provides an exciting tool to detect molecular and cellular behaviors under aqueous conditions. AFM is able to not only visualize the surface topography of the specimens, but also can quantify the mechanical properties of the specimens by force spectroscopy assay. Nevertheless, integrating AFM topographic imaging with force spectroscopy assay has long been limited due to the low spatiotemporal resolution. In recent years, the appearance of a new AFM imaging mode called peak force tapping (PFT) has shattered this limit. PFT allows AFM to simultaneously acquire the topography and mechanical properties of biological samples with unprecedented spatiotemporal resolution. The practical applications of PFT in the field of life sciences in the past decade have demonstrated the excellent capabilities of PFT in characterizing the fine structures and mechanics of living biological systems in their native states, offering novel possibilities to reveal the underlying mechanisms guiding physiological/pathological activities. In this paper, the recent progress in cell and molecular biology that has been made with the utilization of PFT is summarized, and future perspectives for further progression and biomedical applications of PFT are provided.

Development of methods for detecting the fate of mesenchymal stem cells regulated by bone bioactive materials

The fate of mesenchymal stem cells (MSCs) is regulated by biological, physical and chemical signals. Developments in biotechnology and materials science promoted the occurrence of bioactive materials which can provide physical and chemical signals for MSCs to regulate their fate. In order to design and synthesize materials that can precisely regulate the fate of MSCs, the relationship between the properties of materials and the fate of mesenchymal stem cells need to be clarified, in which the detection of the fate of mesenchymal stem cells plays an important role. In the past 30 years, a series of detection technologies have been developed to detect the fate of MSCs regulated by bioactive materials, among which high-throughput technology has shown great advantages due to its ability to detect large amounts of data at one time. In this review, the latest research progresses of detecting the fate of MSCs regulated by bone bioactive materials (BBMs) are systematically reviewed from traditional technology to high-throughput technology which is emphasized especially. Moreover, current problems and the future development direction of detection technologies of the MSCs fate regulated by BBMs are prospected. The aim of this review is to provide a detection technical framework for researchers to establish the relationship between the properties of BMMs and the fate of MSCs, so as to help researchers to design and synthesize BBMs better which can precisely regulate the fate of MSCs.

Solid-State Nuclear Magnetic Resonance Identifies Abnormal Calcium Phosphate Formation in Diseased Bones

The crystallites of calcium phosphate (CaP) in bones consist of hydroxyl apatite (HA) and amorphous calcium phosphate (ACP). These nanoscale structures of CaP are sculptured by biological bone formation and resorption processes and are one of the crucial factors that determine the overall strength of the constructs. We used one- and two-dimensional ¹H-³¹P solid-state nuclear magnetic resonance (SSNMR) to investigate the nanoscopic structural changes of CaP. Two quantitative measurables are deduced based on the heterogeneous linewidth of ³¹P signal and the ratio of ACP to HA, which characterize the mineral crystallinity and the relative proportion of ACP, respectively. We analyzed bones from different murine models of osteopetrosis and osteoporosis and from human samples with osteoporosis and osteoarthritis. It shows that the ACP content increases notably in osteopetrotic bones that are characterized by defective osteoclastic resorption, whereas the overall crystallinity increases in osteoporotic bones that are marked by overactive osteoclastic resorption. Similar pathological characteristics are observed for the sclerotic bones of late-stage osteoarthritis, as compared to those of the osteopetrotic bones. These findings suggest that osteoclast-related bone diseases not only alter the bone density macroscopically but also lead to abnormal formation of CaP crystallites. The quantitative measurement by SSNMR provides a unique perspective on the pathology of bone diseases at the nanoscopic level.

Identification and Analysis of Key Parameters for the Ossification on Particle Functionalized Composites Hydrogel Materials

Developing materials for tissue engineering and studying the mechanisms of cell adhesion is a complex and multifactor process that needs analysis using physical chemistry and biology. The major challenge is the labor-intensive data mining as well as requirements of the number of advanced techniques. For example, hydrogel-based biomaterials with cell-binding sites, tunable mechanical properties, and complex architectures have emerged as a powerful tool to control cell adhesion and proliferation for tissue engineering. Composite hydrogels could be used for bone tissue regeneration, but they exhibit poor ossification properties. In current work, we have designed new osteoinductive gellan gum hydrogels by a thermal annealing approach and consequently functionalized them with Ca/Mg carbonate submicron particles. Determination of key parameters, which influence a successful hydroxyapatite generation, was done via the principal component analysis of 18 parameters (Young's modulus of the hydrogel and particles, particle size, and mass) and cell behavior at various time points (like viability, numbers of the cells, rate of alkaline phosphatase production, and cells area) obtained by characterizing such composite hydrogel. It is determined that the particles size and concentration of calcium ions have a dominant effect on the hydroxyapatite formation, because of providing local areas with a high Young's modulus in a hydrogel, a desirable property for cell adhesion. The detailed analysis presented here allows identifying hydrogels for cell growth applications, while on the other hand, material properties can be predicted, and their overall number can be minimized leading to efficient optimization of bone reconstruction and other cell growth applications.

Potential of residual fungal biomass: a review

In this study, it was evaluated and documented the potential uses of the residual fungal biomass from fermentation. The chemical composition of the biomass was determined by instrumental analysis techniques for its characterization and its possible application. It was found that this biomaterial is generally composed of sugars, proteins, and lipids, which provide it certain properties and applications that must be characterized morphologically, chemically, and mechanically. The residual fungal biomass could be used for two processes: the extraction of biopolymers, with several applications in the food industry, cosmetics, and pharmaceutical, among others; and the removal of contaminants by mechanisms of adsorption with biopolymers, known also as biosorption, in tertiary treatments of wastewater.

Fractal dimension of antibody-PEG precipitate: Light microscopy for the reconstruction of 3D precipitate structures

Protein and in particular antibody precipitation by PEG is a cost-effective alternative for the first capture step. The 3D structure of precipitates has a large impact on the process parameters for the recovery and dissolution, but current technologies for determination of precipitate structures are either very time consuming (cryo-TEM) or only generate an average fractal dimension (light scattering). We developed a light microscopy based reconstruction of 3D structures of individual particles with a resolution of 0.1-0.2 µm and used this method to characterize particle populations generated by batch as well as continuous precipitation in different shear stress environments. The resulting precipitate structures show a broad distribution in terms of fractal dimension. While the average fractal dimension is significantly different for batch and continuous precipitation, the distribution is broad and samples overlap significantly. The precipitate flocs were monofractal from micro- to nanoscale showing a random but consistent nature of precipitate formation. We showed that the fractal dimension and 3D reconstruction is a valuable tool for characterization of protein precipitate processes. The current switch from batch to continuous manufacturing has to take the 3D structure and population of different protein precipitates into account in their design, engineering, and scale up.

Ivory vs. osseous ivory substitutes-Non-invasive diffractometric discrimination

A new discrimination method for the bioapatite materials bone, antler and ivory was developed using X-ray diffractometry and comprises non-invasive measurements in order to take valuable objects into account. Our approach deals with the analysis of peak intensity ratios resulting from several measurements on each object. For instance, the intensity ratio of the apatite reflections 002 and 310 has been described in the literature as representing the degree of apatite crystal orientation and varies depending on the sample orientation. The decisive factor for the material identification is the value dispersion of intensity ratios resulting from the total of all measurements on one object. This pattern of data points, visualised via kernel density estimation (KDE), is characteristic for ivory, bone and antler, respectively, and enables the discrimination of these materials. The observation is justifiable since apatite crystal orientation adapts to the collagen fibre arrangement which shows major differences between different sorts of bioapatite materials. The patterns of data points were received via analysis of 88 objects made of bone (n = 30), antler (n = 27) and ivory (n = 31). In order to verify several identifications X-ray computer tomography was supplemented. The presented method usefully supplements already existing approaches concerning microscopic, elementary and biochemical analyses.

Organic-Mineral Interaction between Biomimetic Materials and Hard Dental Tissues

The aim of the investigation was to study the integration between native human dental tissue and new-generation biomimetic materials replicating the mineral-organic complex of dentin and enamel using IR microspectroscopy for multidimensional visualization and analysis.

Lighting the Ivory Track: Are Near-Infrared and Chemometrics Up to the Job? A Proof of Concept

A rapid tool to discriminate rhino horn and ivory samples from different mammalian species based on the combination of near-infrared reflection (NIR) spectroscopy and chemometrics was evaluated. In this study, samples from the Australian Museum mammalogy collection were scanned between 950 nm and 1650 nm using a handheld spectrophotometer and analyzed using principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA). An overall correct classification rate of 73.5% was obtained for the classification of all samples. This study demonstrates the potential of NIR spectroscopy coupled with chemometrics as a means of a rapid, nondestructive classification technique of horn and ivory samples sourced from a museum. Near-infrared spectroscopy can be used as an alternative or complementary method in the detection of horn and ivory assisting in the combat of illegal trade and aiding the preservation of at-risk species.

Manufacturing and characterization of plates for fracture fixation of bone with biocomposites of poly (lactic acid-co-glycolic acid) (PLGA) with calcium phosphates bioceramics

Commercially, there are several plates and screws for bone fracture fixation made with PLA, however, its long degradation time and lack of integration with bone structure, provides interest in research using polymers with faster degradation, such as PLGA, and together with bioceramics, in order to improve bioactivity in bone regeneration. Based on this, in this study, bone fracture fixation plates composed of PLGA polymer matrix and combinations of 5 and 10%wt. of bioceramics were processed by microinjection. The bioceramics used comprehend nanostructured hydroxyapatite (n-HA), β-tricalcium phosphate (β-TCP) and calcium phosphate with ion substitution of magnesium (Mg-Ca/P) and strontium (Sr-Ca/P). The introduction of bioceramics modified thermal and mechanical properties of the polymer. The TGA analysis showed that there was a variation on the ceramic's mass inserted in relation to the expected values (5% and 10%wt.) in all groups of biocomposites. In general, Tg values obtained by DMA were slightly increased in almost all the biocomposites. The storage modulus (E') of biocomposites was higher for almost all groups of inserted ceramics, with exception of 5%n-HA. In the flexural tests, the biocomposites obtained a great dispersion in average values of fracture loading, presented lower values in relation to pure PLGA. There were difficulties in the processing of biocomposites with Mg-Ca/P and Sr-Ca/P, a factor that can be attributed to lack of homogeneity in the material mixing process. The results suggest modifications in thermal and mechanical properties of the PLGA plates with the bioceramics insertion and provide improvement understanding about of manufactured composites with PLGA and bioceramics.

Transmission Electron Microscopy of Bone

Electron microscopic analysis of mineralized tissues like bone and dentin is essential for understanding of cell-cell/cell-matrix interactions, and the three-dimensional organization of these tissues. This chapter describes a few methods to process mineralized tissues obtained from different sources for ultrastructural analysis by transmission electron microscopy.

Fabrication of alumina-PSZ composites via spark plasma sintering and their mechanical properties

Alumina-partially stabilized zirconia (PSZ) composites were fabricated via spark plasma sintering (SPS) technique to produce biocompatible materials with superior mechanical properties. The volume fraction of the composites covered from 100% alumina to 100% PSZ. Their sintering state was examined by optical microscopy, density measurement, and X-ray diffraction, and dense composites without any reaction phases could be fabricated, irrespective of PSZ content. Then, three-point bending tests and hardness tests were conducted. The hardness and elastic modulus agreed with the predictions based on the Voigt model and the Eshelby's equivalent inclusion model combined with the Mori-Tanaka's mean field concept, respectively. While the bending strength of the composites ranged from that of monolithic alumina to that of monolithic PSZ, the fracture toughness of the composites improved as compared with the monoliths of alumina and PSZ. We concluded that the use of alumina and PSZ was effective to fabricate the composites with high mechanical performances.

Early stages of drug crystallization from amorphous solid dispersion via fractal analysis based on chemical imaging

Early stages of crystallization from amorphous solid dispersion (ASD) are typically not detected by means of standard methods like powder X-ray diffraction (XRPD). The aim of this study is therefore to evaluate if fractal analysis based on energy dispersive X-ray imaging can provide the means to identify early signs of physical instability. ASDs of the poorly water-soluble compound, felodipine (FEL) were prepared by solvent evaporation using different grades of HPMCAS, at 50 wt% drug loading. Samples were stored at accelerated conditions of 40 °C. Scanning electron microscopy equipped with an energy-dispersive X-ray spectroscopy (SEM-EDS) was used for elemental mapping of tablet surfaces. Comparative data were generated with a standard XRPD and with more sensitive methods for detection of early instability, i.e. laser scanning confocal microscopy (LSM) and atomic force microscopy (AFM). The SEM-EDS identified changes of drug-rich domains that were confirmed by LSM and AFM. Early changes in drug clusters were also revealed by a multifractal analysis that indicated a beginning phase separation and drug crystallization. Therefore, the presented fractal cluster analysis based on chemical imaging bears much promise as a new method to detect early signs of physical instability in ASD, which is of great relevance for pharmaceutical development.

Chitosan oligosaccharide derivatives as green corrosion inhibitors for P110 steel in a carbon-dioxide-saturated chloride solution

Two chitosan oligosaccharide derivatives (PHC and BHC) were synthesized for use as corrosion inhibitors. They were characterized using Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). The inhibition efficiency of PHC and BHC on P110 steel corrosion in a 3.5 wt.% NaCl CO₂-saturated solution at 80℃ was studied using gravimetric measurement, scanning electron microscopy (SEM), atomic force microscopy (AFM), electrochemical analysis, and quantum chemical calculation. The results indicated that inhibition efficiency increased with increasing concentration of inhibitor. Energy dispersive X-ray (EDX), contact angle, and electrochemical impedance spectroscopy (EIS) measurements showed that the inhibitors had been successfully adsorbed to the surface of the P110 steel. The results of potentiodynamic polarization indicated that both compounds were mixed-type inhibitors.

Comparison of μ-ATR-FTIR spectroscopy and py-GCMS as identification tools for microplastic particles and fibers isolated from river sediments

In recent years, many studies on the analysis of microplastics (MP) in environmental samples have been published. These studies are hardly comparable due to different sampling, sample preparation, as well as identification and quantification techniques. Here, MP identification is one of the crucial pitfalls. Visual identification approaches using morphological criteria alone often lead to significant errors, being especially true for MP fibers. Reliable, chemical structure-based identification methods are indispensable. In this context, the frequently used vibrational spectroscopic techniques but also thermoanalytical methods are established. However, no critical comparison of these fundamentally different approaches has ever been carried out with regard to analyzing MP in environmental samples. In this blind study, we investigated 27 single MP particles and fibers of unknown material isolated from river sediments. Successively micro-attenuated total reflection Fourier transform infrared spectroscopy (μ-ATR-FTIR) and pyrolysis gas chromatography-mass spectrometry (py-GCMS) in combination with thermochemolysis were applied. Both methods differentiated between plastic vs. non-plastic in the same way in 26 cases, with 19 particles and fibers (22 after re-evaluation) identified as the same polymer type. To illustrate the different approaches and emphasize the complementarity of their information content, we exemplarily provide a detailed comparison of four particles and three fibers and a critical discussion of advantages and disadvantages of both methods.

3D-printed scaffolds with calcified layer for osteochondral tissue engineering

Treating full-layer injury of bone and cartilage is currently a significant challenge in orthopedic trauma repair. Joint damage typically includes chondral defects, and the underlying subchondral defect sites are difficult to repair. Tissue engineering technology could potentially be used to treat such injuries; however, results to date been unsatisfactory. The aim of this study was to design a multilayer composite scaffold containing cartilage, bone, and calcified layers to simulate physiological full-thickness bone-cartilage structure. The cartilage layer was created using an improved temperature-gradient thermally induced crystallization technology. The bone and calcified layers were synthesized using 3D printing technology. We examined the scaffold by using scanning electron microscope (SEM), X-ray diffraction (XRD), fluorescence staining, and micro computed tomography (Micro-CT), and observed clearly oriented structures in the cartilage layer, overlapping structures in the bone scaffold, and a compressed calcified layer. Biomechanical performance testing showed that the scaffolds were significantly stronger than scaffolds without a calcified layer (traditional scaffolds) in maximum tensile strength and maximum shear strength (P < 0.05). After inoculating cells onto the scaffolds, we observed similar cell adherence and proliferation to that observed in traditional scaffolds, likely because of the high porosity of the whole scaffold. Our scaffolds could be used in bone and cartilage full-thickness injury repair methods, as well as applications in the field of tissue engineering.

The osteoimmunomodulatory property of a barrier collagen membrane and its manipulation via coating nanometer-sized bioactive glass to improve guided bone regeneration

Barrier membranes with nano-sized bioceramic coating can modulate the osteoimmune responses to stimulate osteogenesis.