Development, characterization and biological in vitro assays of paclitaxel-loaded PCL polymeric nanoparticles

mPEG-PLA micelles for nose-to-brain delivery of crizotinib-heptamethine cyanine dye conjugate for potential treatment of glioblastoma

Glioblastoma (GBM) is one of the most challenging tumours to treat, with considerable intra- and inter-tumoral heterogeneity and limited treatment options, mainly because of the presence of the blood-brain barrier (BBB). Heptamethine cyanine dyes (HMCDs), such as IR786, have been recently utilised to improve tumour tissue specificity of drugs for treating brain cancers. Their conjugates with drugs such as tyrosine kinase inhibitors (TKIs), which can target multiple pathways aberrantly activated in GBM, provide new avenues for GBM treatment. To improve the therapeutic potential of such drug-dye conjugates and minimise the off-target effects, polymeric micelles prepared using methoxy polyethylene glycol-block-polylactic acid (mPEG-PLA), were developed for encapsulation of a conjugate consisting of ALK inhibitor crizotinib and HMCD IR786 for nose-to-brain (intranasal) delivery. Crizotinib-IR786 micelles were 99.6 ± 9.1 nm in diameter with a zeta potential of 12.8 ± 2.2 mV and average drug loading of 2.9%. On U87MG and KNS42 GBM cell models, crizotinib-IR786 micelles showed comparable cytotoxicity to that of free crizotinib-IR786, and both were significantly more potent than crizotinib alone or crizotinib-only micelles. In a preliminary proof-of-concept trial, the crizotinib-IR786 micelles when administered intranasally to orthotopic GBM mice, demonstrated uptake through the nasal epithelium and accumulated in the GBM tumour, confirming the nose-to-brain delivery pathway. In conclusion, this study demonstrated that the mPEG-PLA micelles can be potentially used as a suitable delivery vehicle for nose-to-brain delivery of crizotinib-IR786 for the treatment of GBM. The promising in vivo preliminary proof-of-concept warrants further detailed in vivo efficacy studies.

Hemocompatible and biocompatible hybrid nanocarriers for enhanced oral bioavailability of paclitaxel: in vivo evaluation

Oral administration of BCS class IV anticancer agents has always remained challenging and frequently results in poor oral bioavailability. The goal of the current study was to develop hybrid nanoparticles (HNPs) employing cholesterol and poloxamer-407 to boost paclitaxel's (PTX) oral bioavailability. A series of HNPs with different cholesterol and poloxamer-407 ratios were developed utilizing a single-step nanoprecipitation technique. The PTX loaded HNPs were characterized systematically via particle size, zeta potential, polydispersity index, surface morphology, in vitro drug release, FTIR, DSC, XRD, acute oral toxicity analysis, hemolysis evaluation, accelerated stability studies, and in vivo pharmacokinetic analysis. The HNPs were found within the range of 106.6±55.60 - 244.5±88.24 nm diameter with the polydispersity index ranging from 0.20±0.03 - 0.51±0.11. SEM confirmed circular, nonporous, and smooth surfaces of HNPs. PTX loaded HNPs exhibited controlled release profile. The compatibility between the components of formulation, thermal stability, and amorphous nature of HNPs were confirmed by FTIR, DSC, and XRD, respectively. Acute oral toxicity analysis revealed that developed system have no deleterious effects on the animals' cellular structures. HNPs demonstrated notable cytotoxic effects and were hemocompatible at relatively higher concentrations. In vivo pharmacokinetic profile (AUC0-∞, AUMC0-∞, t1/2, and MRT0-∞) of the PTX loaded HNPs was improved as compared to pure PTX. It is concluded from our findings that the developed HNPs are hemocompatible, biocompatible and have significantly enhanced the oral bioavailability of PTX.

Nanocargos designed with synthetic and natural polymers for ovarian cancer management

Ovarian cancer cells usually spread in the peritoneal region, and if chemotherapeutic drugs can be given in these regions with proximity, then the anticancer property of the chemotherapeutic drugs can enhance. However, chemotherapeutic drug administrations are hindered by local toxicity. In the drug delivery system, microparticles or nanoparticles are administered in a controlled manner. Microparticles stay in a close vicinity while nanoparticles are smaller and can move evenly in the peritoneum. Intravenous administration of the drug evenly distributes the medicine in the target places and if the composition of the drug has nanoparticles it will have more specificity and will have easy access to the cancer cells and tumors. Among the different types of nanoparticles, polymeric nanoparticles were proven as most efficient in drug delivery. Polymeric nanoparticles are seen to be combined with many other molecules like metals, non-metals, lipids, and proteins, which helps in the increase of cellular uptake. The efficiency of different types of polymeric nanoparticles used in delivering the load for management of ovarian cancer will be discussed in this mini-review.

Development of Statistically Optimized Piperine-Loaded Polymeric Nanoparticles for Breast Cancer: In Vitro Evaluation and Cell Culture Studies

Piperine (PPN) is a natural alkaloid derived from black pepper (Piper nigrum L.) and has garnered substantial attention for its potential in breast cancer therapy due to its diverse pharmacological properties. However, its highly lipophilic characteristics and poor dissolution in biological fluids limit its clinical application. Therefore, to overcome this limitation, we formulate and evaluate PPN-encapsulated polycaprolactone (PCL) nanoparticles (PPN-PCL-NPs). The nanoparticles were prepared by a single-step nanoprecipitation method and further optimized by a formulation design approach. The influence of selected independent variables PCL (X1), poloxamer 188 (P-188; X2), and stirring speed (SS; X3) were investigated on the particle size (PS), polydispersity index (PDI), and % encapsulation efficiency (EE). The selected optimized nanoparticles were further assessed for stability, in vitro release, and in vitro antibreast cancer activity in the MCF-7 cancer cell line. The PS, PDI, zeta potential, and % EE of the optimized PPN-PCL-NPs were observed to be 107.61 ± 5.28 nm, 0.136 ± 0.011, -20.42 ± 1.82 mV, and 79.53 ± 5.22%, respectively. The developed PPN-PCL-NPs were stable under different temperature conditions with insignificant changes in their pharmaceutical attributes. The optimized PPN-PCL-NPs showed a burst release for the first 6 h and later showed sustained release for 48 h. The PPN-PCL-NPs exhibit exceptional cytotoxic effects in MCF-7 breast tumor cells in comparison with the native PPN. Thus, the formulation of PPN-loaded PCL-NPs can be a promising approach for better therapeutic efficacy against breast cancer.

Preparation and evaluation of cytotoxic potential of paclitaxel containing poly-3-hydroxybutyrate-co-3-hydroxyvalarate (PTX/PHBV) nanoparticles

Paclitaxel (PTX) is a potent anticancer drug. In the present study, PTX was loaded in poly-3-hydroxybutyrate-co-3-hydroxyvalarate (PHBV) to fabricate the PTX/PHBV (drug-loaded) nanoparticles via the nanoprecipitation method. Blank PHBV nanoparticles were also prepared. The drug-encapsulation efficiency of PTX/PHBV nanoparticles was 45±0.4%. The PTX/PHBV nanoparticles exhibited a pH-sensitive release profile and followed a quasi-Fickian diffusion mechanism. Cytotoxic properties of PHBV and PTX/PHBV nanoparticles were checked against the MCF-7 and Caco-2 cell lines. The PHBV nanoparticle did not inhibit the proliferation of MCF-7 and Caco-2 cell lines, thus depicting their non-toxic and biocompatible nature. On the other hand, the PTX/PHBV nanoparticles demonstrated 1.03-fold higher cytotoxicity and 1.61-fold enhanced apoptosis after treatment with the PTX/PHBV nanoparticles versus free PTX. In summary, the PHBV nanoparticles could be a potential candidate for the delivery of PTX for cancer treatment.

A systematic review of emerging technologies to enhance the treatment of ovarian cancer

The efficacy and safety of chemotherapy are two major challenges when it comes to treating ovarian cancer. The associated undesirable side effects of chemotherapy agents jeopardize the clinical intent and the efficiency of the therapy. Multiple studies have been published describing new developments and novel strategies utilizing the latest therapeutic and drug delivery technologies to address the efficacy and safety of chemotherapeutics in ovarian cancers. We have identified five novel technologies that are available and, if used, have the potential to mitigate the above-mentioned challenges. Nanocarriers in different forms (Nano-gel, Aptamer, peptide medicated formulations, Antibody-drug conjugation, surface charge, and nanovesicle technologies) are developed and available to be employed to target the cancerous tissue. These strategies are promising to improve clinical efficacy and reduce side effects. We have systematically searched and analyzed published data, as well as the authors intent for the described technology on each publication. We narrowed to 81 key articles and extracted their data to be discussed in this review. In summary, the selected articles investigated the pharmacokinetic properties of drugs combined with nanocarriers and found significant improvement in efficacy and safety by reducing the IC50 values and drug doses. These key papers described promising novel technologies in anti-cancer therapeutic approaches to enable sustained drug release and achieve prolonged drug performance near the tumor site or target tissue.

Exploring anticancer properties of novel Nano-Formulation of BODIPY Compound, Photophysicochemical, in vitro and in silico evaluations

A new BODIPY complex (C4) composed of meso- thienyl-pyridine substituted core unit diiodinated from 2- and 6- positions and distyryl moieties at 3- and 5- positions is synthesized. Nano-sized formulation of C4 is prepared by single emulsion method using poly(ε-caprolactone)(PCL) polymer. Encapsulation efficiency and loading capacity values of C4 loaded PCL nanoparticles (C4@PCL-NPs) are calculated and in vitro release profile of C4 is determined. The cytotoxicity and anti-cancer activity are conducted on the L929 and MCF-7 cell lines. Cellular uptake study is performed and interaction between C4@PCL-NPs and MCF-7 cell line is investigated. Anti-cancer activity of C4 is predicted with molecular docking studies and the inhibition property on EGFR, ERα, PR and mTOR are investigated for its anticancer properties. Molecular interactions, binding positions and docking score energies between C4 and EGFR, ERα, PR and mTOR targets are revealed using in silico methods. The druglikeness and pharmacokinetic properties of C4 are evaluated using the SwissADME and its bioavailability and toxicity profiles are assessed using the SwissADME, preADMET and pkCSM servers. In conclusion, the potential use of C4 as an anti-cancer agent is evaluated in vitro and in silico methods. Also, photophysicochemical properties are studied to investigate the potential of using Photodynamic Therapy (PDT). In photochemical studies, the calculated singlet oxygen quantum yield (Φ_Δ) value was 0.73 for C4 and in photopysical studies, the calculated fluorescence quantum yield Φ_F value was 0.19 for C4.

Resveratrol-Loaded Polymeric Nanoparticles: The Effects of D-α-Tocopheryl Polyethylene Glycol 1000 Succinate (TPGS) on Physicochemical and Biological Properties against Breast Cancer In Vitro and In Vivo

Resveratrol (RSV), a phytoalexin from grapes and peanuts, has been reported to exhibit antiproliferative effects on various cancer cell lines. In breast cancer, RSV has been demonstrated to exert an antiproliferative effect on both hormone-dependent and hormone-independent breast cancer cell lines. However, RSV is a lipophilic drug, and its therapeutic effect could be improved through nanoencapsulation. Functionalizing polymeric nanoparticles based on polycaprolactone (PCL) with polyethylene glycol 1000 tocopheryl succinate (TPGS) has been reported to prolong drug circulation and reduce drug resistance. However, the effect of TPGS on the physicochemical properties and biological effects of breast cancer cells remains unclear. Therefore, this study aimed to develop RSV-loaded PCL nanoparticles using nanoprecipitation and investigate the effect of TPGS on the nanoparticles' physicochemical characteristics (particle size, zeta potential, encapsulation efficiency, morphology, and release rate) and biological effects on the 4T1 breast cancer cell line (cytotoxicity and cell uptake), in vitro and in vivo. The optimized nanoparticles without TPGS had a size of 138.1 ± 1.8 nm, a polydispersity index (PDI) of 0.182 ± 0.01, a zeta potential of -2.42 ± 0.56 mV, and an encapsulation efficiency of 98.2 ± 0.87%, while nanoparticles with TPGS had a size of 127.5 ± 3.11 nm, PDI of 0.186 ± 0.01, zeta potential of -2.91 ± 0.90 mV, and an encapsulation efficiency of 98.40 ± 0.004%. Scanning electron microscopy revealed spherical nanoparticles with low aggregation tendency. Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared Spectroscopy (FTIR) identified the constituents of the nanoparticles and the presence of drug encapsulation in an amorphous state. In vitro release studies showed that both formulations followed the same dissolution profiles, with no statistical differences. In cytotoxicity tests, IC₅₀ values of 0.12 µM, 0.73 µM, and 4.06 µM were found for the formulation without TPGS, with TPGS, and pure drug, respectively, indicating the potentiation of the cytotoxic effect of resveratrol when encapsulated. Flow cytometry and confocal microscopy tests indicated excellent cellular uptake dependent on the concentration of nanoparticles, with a significant difference between the two formulations, suggesting that TPGS may pose a problem in the endocytosis of nanoparticles. The in vivo study evaluating the antitumor activity of the nanoparticles confirmed the data obtained in the in vitro tests, demonstrating that the nanoparticle without TPGS significantly reduced tumor volume, tumor mass, maintained body weight, and improved survival in mice. Moreover, the biochemical evaluation evidenced possible hepatotoxicity for formulation with TPGS.

Biodegradable Biopolymeric Nanoparticles for Biomedical Applications-Challenges and Future Outlook

Biopolymers are polymers obtained from either renewable or non-renewable sources and are the most suitable candidate for tailor-made nanoparticles owing to their biocompatibility, biodegradability, low toxicity and immunogenicity. Biopolymeric nanoparticles (BPn) can be classified as natural (polysaccharide and protein based) and synthetic on the basis of their origin. They have been gaining wide interest in biomedical applications such as tissue engineering, drug delivery, imaging and cancer therapy. BPn can be synthesized by various fabrication strategies such as emulsification, ionic gelation, nanoprecipitation, electrospray drying and so on. The main aim of the review is to understand the use of nanoparticles obtained from biodegradable biopolymers for various biomedical applications. There are very few reviews highlighting biopolymeric nanoparticles employed for medical applications; this review is an attempt to explore the possibilities of using these materials for various biomedical applications. This review highlights protein based (albumin, gelatin, collagen, silk fibroin); polysaccharide based (chitosan, starch, alginate, dextran) and synthetic (Poly lactic acid, Poly vinyl alcohol, Poly caprolactone) BPn that has recently been used in many applications. The fabrication strategies of different BPn are also being highlighted. The future perspective and the challenges faced in employing biopolymeric nanoparticles are also reviewed.

Paclitaxel-Loaded Lipid-Coated Magnetic Nanoparticles for Dual Chemo-Magnetic Hyperthermia Therapy of Melanoma

Melanoma is the most aggressive and metastasis-prone form of skin cancer. Conventional therapies include chemotherapeutic agents, either as small molecules or carried by FDA-approved nanostructures. However, systemic toxicity and side effects still remain as major drawbacks. With the advancement of nanomedicine, new delivery strategies emerge at a regular pace, aiming to overcome these challenges. Stimulus-responsive drug delivery systems might considerably reduce systemic toxicity and side-effects by limiting drug release to the affected area. Herein, we report the development of paclitaxel-loaded lipid-coated manganese ferrite magnetic nanoparticles (PTX-LMNP) as magnetosomes synthetic analogs, envisaging the combined chemo-magnetic hyperthermia treatment of melanoma. PTX-LMNP physicochemical properties were verified, including their shape, size, crystallinity, FTIR spectrum, magnetization profile, and temperature profile under magnetic hyperthermia (MHT). Their diffusion in porcine ear skin (a model for human skin) was investigated after intradermal administration via fluorescence microscopy. Cumulative PTX release kinetics under different temperatures, either preceded or not by MHT, were assessed. Intrinsic cytotoxicity against B16F10 cells was determined via neutral red uptake assay after 48 h of incubation (long-term assay), as well as B16F10 cells viability after 1 h of incubation (short-term assay), followed by MHT. PTX-LMNP-mediated MHT triggers PTX release, allowing its thermal-modulated local delivery to diseased sites, within short timeframes. Moreover, half-maximal PTX inhibitory concentration (IC50) could be significantly reduced relatively to free PTX (142,500×) and Taxol® (340×). Therefore, the dual chemo-MHT therapy mediated by intratumorally injected PTX-LMNP stands out as a promising alternative to efficiently deliver PTX to melanoma cells, consequently reducing systemic side effects commonly associated with conventional chemotherapies.

Polymeric Nanoparticles for Delivery of Natural Bioactive Agents: Recent Advances and Challenges

In the last few decades, several natural bioactive agents have been widely utilized in the treatment and prevention of many diseases owing to their unique and versatile therapeutic effects, including antioxidant, anti-inflammatory, anticancer, and neuroprotective action. However, their poor aqueous solubility, poor bioavailability, low GIT stability, extensive metabolism as well as short duration of action are the most shortfalls hampering their biomedical/pharmaceutical applications. Different drug delivery platforms have developed in this regard, and a captivating tool of this has been the fabrication of nanocarriers. In particular, polymeric nanoparticles were reported to offer proficient delivery of various natural bioactive agents with good entrapment potential and stability, an efficiently controlled release, improved bioavailability, and fascinating therapeutic efficacy. In addition, surface decoration and polymer functionalization have opened the door to improving the characteristics of polymeric nanoparticles and alleviating the reported toxicity. Herein, a review of the state of knowledge on polymeric nanoparticles loaded with natural bioactive agents is presented. The review focuses on frequently used polymeric materials and their corresponding methods of fabrication, the needs of such systems for natural bioactive agents, polymeric nanoparticles loaded with natural bioactive agents in the literature, and the potential role of polymer functionalization, hybrid systems, and stimuli-responsive systems in overcoming most of the system drawbacks. This exploration may offer a thorough idea of viewing the polymeric nanoparticles as a potential candidate for the delivery of natural bioactive agents as well as the challenges and the combating tools used to overcome any hurdles.

Copaiba Oil-Loaded Polymeric Nanocapsules: Production and In Vitro Biosafety Evaluation on Lung Cells as a Pre-Formulation Step to Produce Phytotherapeutic Medicine

Copaiba oil has been largely used due to its therapeutic properties. Nanocapsules were revealed to be a great nanosystem to carry natural oils due to their ability to improve the bioaccessibility and the bioavailability of lipophilic compounds. The aim of this study was to produce and characterize copaiba oil nanocapsules (CopNc) and to evaluate their hemocompatibility, cytotoxicity, and genotoxicity. Copaiba oil was chemically characterized by GC-MS and FTIR. CopNc was produced using the nanoprecipitation method. The physicochemical stability, toxicity, and biocompatibility of the systems, in vitro, were then evaluated. Β-bisabolene, cis-α-bergamotene, caryophyllene, and caryophyllene oxide were identified as the major copaiba oil components. CopNc showed a particle size of 215 ± 10 nm, a polydispersity index of 0.15 ± 0.01, and a zeta potential of -18 ± 1. These parameters remained unchanged over 30 days at 25 ± 2 °C. The encapsulation efficiency of CopNc was 54 ± 2%. CopNc neither induced hemolysis in erythrocytes, nor cytotoxic and genotoxic in lung cells at the range of concentrations from 50 to 200 μg·mL^-1. In conclusion, CopNc showed suitable stability and physicochemical properties. Moreover, this formulation presented a remarkable safety profile on lung cells. These results may pave the way to further use CopNc for the development of phytotherapeutic medicine intended for pulmonary delivery of copaiba oil.

Identification and toxicity towards aquatic primary producers of the smallest fractions released from hydrolytic degradation of polycaprolactone microplastics

Bioplastics are thought as a safe substitute of non-biodegradable polymers. However, once released in the environment, biodegradation may be very slow, and they also suffer abiotic fragmentation processes, which may give rise to different fractions of polymer sizes. We present novel data on abiotic hydrolytic degradation of polycaprolactone (PCL), tracking the presence of by-products during 132 days by combining different physicochemical techniques. During the study a considerable amount of two small size plastic fractions were found (up to ∼ 6 mg of PCL by-product/g of PCL beads after 132 days of degradation); and classified as submicron-plastics (sMPs) from 1 μm to 100 nm and nanoplastics (NPs, <100 nm) as well as oligomers. The potential toxicity of the smallest fractions, PCL by-products < 100 nm (PCL-NPs + PCL oligomers) and the PCL oligomers single fraction, was tested on two ecologically relevant aquatic primary producers: the heterocystous filamentous nitrogen-fixing cyanobacterium Anabaena sp. PCC 7120, and the unicellular cyanobacterium Synechococcus sp. PCC 7942. Upon exposure to both, single and combined fractions, Reactive Oxygen Species (ROS) overproduction, intracellular pH and metabolic activity alterations were observed in both organisms, whilst membrane potential and morphological damages were only observed upon PCL-NPs + PCL oligomers exposure. Notably both PCL by-products fractions inhibited nitrogen fixation in Anabaena, which may be clearly detrimental for the aquatic trophic chain. As conclusion, fragmentation of bioplastics may render a continuous production of secondary nanoplastics as well as oligomers that might be toxic to the surrounding biota; both PCL-NPs and PCL oligomers, but largely the nanoparticulate fraction, were harmful for the two aquatic primary producers. Efforts should be made to thoroughly understand the fragmentation of bioplastics and the toxicity of the smallest fractions resulting from that degradation.

Antifungal activity of poly(ε-caprolactone) nanoparticles incorporated with Eucalyptus essential oils against Hemileia vastatrix

Coffee (Coffea L.) is one of the main crops produced globally. Its contamination by the fungus Hemileia vastatrix Berkeley and Broome has been economically detrimental for producers. The objective of this work was to extract and characterize the essential oils from Eucalyptus citriodora Hook, Eucalyptus camaldulensis Dehn and Eucalyptus grandis Hill ex Maiden, produce and characterize nanoparticles containing these essential oils, and evaluate the in vivo and in vitro antifungal activity of free and nanoencapsulated essential oils. The principal constituents of the essential oil from E. citriodora was citronellal , that from E. grandis was α-pinene , and that from E. camaldulensis was 1,8-cineol. The in vitro antifungal activity against the fungus H. vastatrix was 100% at a concentration of 1000 μl l^-1 for all the oils and nanoparticles containing these natural products. The sizes of the nanoparticles produced with the essential oils from E. citriodora, E. camaldulensis and E. grandis were 402.13 nm, 275.33 nm and 328.5 nm, respectively, with surface charges of -11.8 mV, -9.24 mV and -6.76 mV, respectively. Fourier transform infrared analyses proved that the encapsulation of essential oils occurred in the polymeric matrix of poly(ε-caprolactone). The incorporation of essential oils into biodegradable poly(ε-caprolactone) nanoparticles increased their efficiency as biofungicides in the fight against coffee rust, decreasing the severity of the disease by up to 90.75% after treatment with the nanoparticles conaining the essential oil from E. grandis.

Curcumin-loaded carrageenan nanoparticles: Fabrication, characterization, and assessment of the effects on osteoblasts mineralization

The use of Curcumin (CR) as a bioactive molecule to prevent and treat inflammation- related diseases is widespread. However, the high hydrophobicity hinders the in vivo bioavailability of CR, reducing its therapeutic index. In the present study, we described the use of nanoparticles (NPs) made of kappa-carrageenan (κ-Carr), a sulphated polysaccharide, as cost-effective, biodegradable and biocompatible CR carriers. CR-loaded κ-Carr nanoparticles (CR@Carr NPs) were prepared by mixing a κ-Carr aqueous solution with a CR ethanolic solution. The final suspension was centrifuged and re-suspended in phosphate buffer solution. The NPs' size was tuned by changing the concentration of the polysaccharide. CR@CarrNPs displayed high CR incorporation efficiency (~80 wt%) and a double-exponential curve of CR release at physiological conditions (37 °C and pH 7.4) with a cumulative drug release of 32 wt% after 24 h for the smaller NP. Our results also showed that CR@CarrNPs were not cytotoxic to osteoblasts at concentrations up to 1 μM. Confocal microscopy images revealed the internalization of CR by the cells guided by the NPs. Cells treated with CR@CarrNPs exhibited higher activity of alkaline phosphatase and higher expression of the main osteogenic genes (Sp7, Col1 and Runx2), and mineralized the extracellular matrix in a higher extent compared to the cells cultivated in absence of the NPs. We posited that these effects were related to the NP-driven internalization of CR by osteoblasts. Our study sheds light on the possible use of CR@CarrNPs as efficient and safe therapeutic tools for the treatment of bone-related diseases.

Coarse-Grained Molecular Dynamics Simulations of Paclitaxel-Loaded Polymeric Micelles

A continuous manufacturing technology based on coaxial turbulent jet in coflow was previously developed to produce paclitaxel-loaded polymeric micelles. Herein, coarse-grained molecular dynamics (CG-MD) simulations were implemented to better understand the effect of the material attributes (i.e., the drug-polymer ratio and the ethanol concentration) and process parameters (i.e., temperature) on the self-assembly process of polymeric micelles as well as to provide molecular details on micelle instability. An all-atom (AA) poly (ethylene glycol)-poly (lactic acid) (PEG-PLA) polymer model was developed as the reference for parameterizing a coarse-grained (CG) model, and the AA polymer model was further validated with experimental glass transition temperature (T_g). The model transferability was verified by comparing structural properties between the AA and CG models. The CG model was further validated with experimental data, including micelle particle size measurements and drug encapsulation efficiency. Furthermore, the encapsulation of paclitaxel into the polymeric micelles was included in the simulations, taking into consideration the interactions between the paclitaxel and the polymers. The results from various points of view demonstrated a strong dependence of the shape of the micelles on the drug encapsulation, with micelles transitioning from spherical to ellipsoidal structures with an increasing paclitaxel amount. Simulation data were also used to identify the critical aggregation number (i.e., the number of polymer and drug molecules required for transition from one shape to another). Improved micellar structural stability was found with a larger micellar size and less solvent accessibility. Lastly, an evaluation was performed on the micellar dissociation free energy using a steered molecular dynamics simulation over a range of temperatures and ethanol concentrations. These simulations revealed that at higher ethanol and temperature conditions, micelles become destabilized, resulting in greater paclitaxel release. The increased drug release was determined to originate from the solvation of the hydrophobic core, which promoted micellar swelling and an associated reduction in hydrophobic interactions, leading to a loosely packed micellar structure.

Characterization and In Vitro and In Vivo Evaluation of Tacrolimus-Loaded Poly(ε-Caprolactone) Nanocapsules for the Management of Atopic Dermatitis

BACKGROUND

Tacrolimus (TAC) is a drug of natural origin used in conventional topical dosage forms to control atopic dermatitis. However, direct application of the drug often causes adverse side effects in some patients. Hence, drug nanoencapsulation could be used as an improved novel therapy to mitigate the adverse effects and enhance bioavailability of the drug.

METHODS

Physicochemical properties, in vitro drug release experiments, and in vivo anti-inflammatory activity studies were performed.

RESULTS

TAC-loaded nanocapsules were successfully prepared by the interfacial deposition of preformed polymer using poly(ε-caprolactone) (PCL). The nanoparticulate systems presented a spherical shape with a smooth and regular surface, adequate diameter (226 to 250 nm), polydispersity index below 0.3, and suitable electrical stability (-38 to -42 mV). X-ray diffraction confirmed that the encapsulation method provided mainly the drug molecular dispersion in the nanocapsule oily core. Fourier-transform infrared spectra suggested that nanoencapsulation did not result in chemical bonds between drug and polymer. In vitro drug dissolution experiments showed a controlled release with a slight initial burst. The release kinetics showed zero-order kinetics. As per the Korsmeyer-Peppas model, anomalous transport features were observed. TAC-loaded PCL nanocapsules exhibited excellent anti-inflammatory activity when compared to the free drug.

CONCLUSIONS

TAC-loaded PCL nanocapsules can be suitably used as a novel nano-based dosage form to control atopic dermatitis.

Anti-Inflammatory Activity of Bullfrog Oil Polymeric Nanocapsules: From the Design to Preclinical Trials

BACKGROUND

Although bullfrog oil (BFO) exerts anti-inflammatory effects, it has undesirable properties limiting its use.

METHODOLOGY

BFO nanocapsules (BFONc) were produced through nanoprecipitation, and their physicochemical and morphological properties were characterized. To evaluate the biocompatibility of the formulation, a mitochondrial activity evaluation assay was conducted, and cell uptake was assessed. The in vitro anti-inflammatory activity was evaluated by measuring reactive oxygen species (ROS), nitric oxide (NO), type-6 interleukin (IL-6), and tumor necrosis factor (TNF) levels. The in vivo anti-inflammatory effect was assessed by quantifying myeloperoxidase (MPO) levels using the carrageenan-induced paw edema model.

RESULTS

BFONc showed a particle size of 233 ± 22 nm, a polydispersity index of 0.17 ± 0.03, and a zeta potential of -34 ± 2.6mV. BFONc revealed remarkable biocompatibility and did not induce changes in cell morphology. Furthermore, BFONc decreased ROS levels by 81 ± 4%; however, NO level increased by 72 ± 18%. TNF and IL-6 levels were reduced by approximately 10% and 90%, respectively. Significant in vivo anti-inflammatory activity was observed compared to dexamethasone. MPO levels were reduced up to 2 MPOs/mg.

CONCLUSION

Taken together, the results pointed out the remarkable biocompatibility and anti-inflammatory effects of BFONc.

Lipid poly (ɛ-caprolactone) hybrid nanoparticles of 5-fluorouracil for sustained release and enhanced anticancer efficacy

AIMS

The present study aimed to develop and characterize poly (ɛ-caprolactone) (PCL) based lipid polymer hybrid nanoparticles for sustained delivery and in-vitro anti-cancer activity in MCF-7 and HeLa cells cancer cell line.

MATERIALS AND METHODS

The nanoprecipitation method was used for the development of 5-fluorouracil loaded lipid polymer hybrid nanoparticles (LPHNPs). The developed LPHNPs were characterized for physicochemical characteristics and the anti-cancer effect was evaluated in MCF-7 and HeLa cells.

SIGNIFICANT FINDINGS

Six formulations having fixed amount of drug and varied lipid, polymer and emulsifier concentrations were prepared. The particle size was in the range of 174 ± 4 to 267 ± 2.65 nm, entrapment efficiency (92.87 ± 0.594 to 94.13 ± 0.772%), negative zeta potential, optimum polydispersity index and spherical shape. FTIR analysis shows no chemical interaction among the formulation components, DSC analysis reveals the disappearance of 5-FU melting endotherm in the developed LPHNPs suggesting amorphization of 5-FU in the developed system, XRD analysis indicates successful encapsulation of the drug in the lipid polymer matrix. The in-vitro release shows a biphasic release pattern with an initial burst release followed by a sustained release profile for 72 h. The drug loaded LPHNPs exhibited a greater cytotoxic effect than 5-FU solution due to sustained release and increased cellular internalization. The acute toxicity study revealed the safety of the developed carrier system for potential delivery of chemotherapeutic agents.

SIGNIFICANCE

The developed LPHNPs of 5-fluorouracil will provide the sustained release behavior of 5-fluorouracil to maximize the therapeutic efficacy and minimize the dose related toxicity.

An Overview of the Antimicrobial Activity of Polymeric Nanoparticles Against Enterobacteriaceae

Bacterial resistance is considered one of the most important public health problems of the century, due to the ability of bacteria to rapidly develop resistance mechanisms, which makes it difficult to treat infections, leading to a high rate of morbidity and mortality. Based on this, several options are being sought as an alternative to currently available treatments, with a particular focus on nanotechnology. Nanomaterials have important potential for use in medical interventions aimed at preventing, diagnosing and treating numerous diseases by directing the delivery of drugs. This review presents data on the use of polymeric nanoparticles having in vitro and in vivo activity against bacteria belonging to the Enterobacteriaceae family.

Recent trends in biodegradable polyester nanomaterials for cancer therapy

Biodegradable polyester nanomaterials-based drug delivery vehicles (DDVs) have been largely used in most of the cancer treatments due to its high biological performance and wider applications. In several previous studies, various biodegradable and biocompatible polyester backbones were used which are poly(lactic acid) (PLA), poly(ε-caprolactone) (PCL), poly(propylene fumarate) (PPF), poly(lactic-co-glycolic acid) (PLGA), poly(propylene carbonate) (PPC), polyhydroxyalkanoates (PHA), and poly(butylene succinate) (PBS). These polyesters were fabricated into therapeutic nanoparticles that carry drug molecules to the target site during the cancer disease treatment. In this review, we elaborately discussed the chemical synthesis of different synthetic polyesters and their use as nanodrug carriers (NCs) in cancer treatment. Further, we highlighted in brief the recent developments of metal-free semi-aromatic polyester nanomaterials along with its role as cancer drug delivery vehicles.

Design of experiments (DoE) to develop and to optimize nanoparticles as drug delivery systems

Nanotechnology has been widely applied to develop drug delivery systems to improve therapeutic performance. The effectiveness of these systems is intrinsically related to their physicochemical properties, so their biological responses are highly susceptible to factors such as the type and quantity of each material that is employed in their synthesis and to the method that is used to produce them. In this context, quality-oriented manufacturing of nanoparticles has been an important strategy to understand and to optimize the factors involved in their production. For this purpose, Design of Experiment (DoE) tools have been applied to obtain enough knowledge about the process and hence achieve high-quality products. This review aims to set up the bases to implement DoE as a strategy to improve the manufacture of nanocarriers and to discuss the main factors involved in the production of the most common nanocarriers employed in the pharmaceutical field.

A Compressive Review about Taxol®: History and Future Challenges

Taxol^®, which is also known as paclitaxel, is a chemotherapeutic agent widely used to treat different cancers. Since the discovery of its antitumoral activity, Taxol^® has been used to treat over one million patients, making it one of the most widely employed antitumoral drugs. Taxol^® was the first microtubule targeting agent described in the literature, with its main mechanism of action consisting of the disruption of microtubule dynamics, thus inducing mitotic arrest and cell death. However, secondary mechanisms for achieving apoptosis have also been demonstrated. Despite its wide use, Taxol^® has certain disadvantages. The main challenges facing Taxol^® are the need to find an environmentally sustainable production method based on the use of microorganisms, increase its bioavailability without exerting adverse effects on the health of patients and minimize the resistance presented by a high percentage of cells treated with paclitaxel. This review details, in a succinct manner, the main aspects of this important drug, from its discovery to the present day. We highlight the main challenges that must be faced in the coming years, in order to increase the effectiveness of Taxol^® as an anticancer agent.

Preparation and characterization of novel anti-inflammatory biological agents based on piroxicam-loaded poly-ε-caprolactone nano-particles for sustained NSAID delivery

Piroxicam (PX), a main member of non-steroidal anti-inflammatory drugs (NSAIDs), is mainly used orally, which causes side effects of the gastrointestinal tract. It also has systemic effects when administered intramuscularly. Intra-articular (IA) delivery and encapsulation of PX in biodegradable poly-ε-caprolactone (PCL) nanoparticles (NPs) offer potential advantages over conventional oral delivery. The purpose of this study is the development of a new type of anti-inflammatory bio-agents containing collagen and PX-loaded NPs, as an example for an oral formulation replacement, for the prolonged release of PX. In this study, the PX was encapsulated in PCL NPs (size 102.7 ± 19.37 nm, encapsulation efficiency 92.83 ± 0.4410) by oil-in-water (o/w) emulsion solvent evaporation method. Nanoparticles were then characterized for entrapment efficiency, percent yield, particle size analysis, morphological characteristics, and in vitro drug release profiles. Eventually, the NPs synthesized with collagen were conjugated so that the NPs were trapped in the collagen sponges using a cross-linker. Finally, biocompatibility tests showed that the anti-inflammatory agents made in this study had no toxic effect on the cells. Based on the results, it appears that PX-loaded PCL NPs along with collagen (PPCLnp-Coll) can be promising for IA administration based on particulate drug delivery for the treatment of arthritis.

In Vitro Assessment of Magnetic Liposomal Paclitaxel Nanoparticles as a Potential Carrier for the Treatment of Ovarian Cancer

Purpose: This study aimed to evaluate the role of magnetic liposome nanoparticles (ML NPs) as a carrier for paclitaxel (PTX) for the treatment of ovarian cancer in vitro.

Methods: Magnetic NPs (MNPs) were synthesized by chemical co-precipitation method. The resulting NPs were characterized in terms of size, size distribution, zeta potential, drug encapsulation efficiency (EE), drug release pattern, and cytotoxicity effects.

Results: The size and zeta potential of PTX-PEG-L and PTX-PEG-ML NPs were determined to be 296, 198 nm; -20, and -19 mV, respectively. Also, their drug encapsulation efficiencies were determined to be 97% and 96%, respectively. It was found that PTX-PEG-ML NPs, compared to PTX-PEG-L NPs, caused a reduction (11%) in the rate of drug release. The cytotoxicity of the drug-loaded NPs was assessed using 3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay against human ovarian epithelial cancer (A2780CP) cells, and the results demonstrated that PTX-PEG-ML NPs caused higher cytotoxicity (by 14%) compared to PTX-PEG-L NPs (IC₅₀: 1.88 ± 0.09 and 2.142 ± 0.1 µM, respectively).

Conclusion: Overall, the results of this study suggest that PTX-PEG-ML NPs could be considered as a therapeutic candidate for the treatment of ovarian cancer.

Development and Characterization of Biocompatible Mannose Functionalized Mesospheres: an Effective Chemotherapeutic Approach for Lung Cancer Targeting

The aim of the present study was to analyze the lung targeting potential of surface engineered mesospheres loaded with doxorubicin hydrochloride (DOX). Gelatin-based DOX encapsulated mesospheres were prepared using a steric stabilization process and surface modified with mannose, using the amino group present on the surface of the mesospheres. Gelatin-DOX-mesospheres (M₁) and gelatin-mannosylated-DOX-mesospheres (M₂) were characterized for particle size, polydispersity index, zeta potential, and % entrapment efficiency which were found respectively 8.7 ± 0.35, 0.671 ± 0.018, 1.74 ± 0.27, and 80.4 ± 1.2 for (M₁) and 9.8 ± 0.41, 0.625 ± 0.010, 0.85 ± 0.11, and 75.1 ± 0.7 for (M₂). Furthermore, the mesospheres were characterized by FTIR, DSC, SEM, and TEM. In vitro drug release study of optimized formulation was carried out using the dialysis tube method. The cumulative percent drug release was found to be 79.2 ± 0.1% and 69.6 ± 0.52% respectively for gelatin-DOX-mesospheres and gelatin-mannosylated-DOX-mesospheres. In vitro cytotoxicity of formulations was determined using xenograft A-549 tumor cell lines. The cytotoxicity recorded as IC₅₀ was more in the case of M₂ compared to M₁. In addition, mesospheres exhibited minimal hemolytic toxicity and appear to be promising for sustained drug delivery of DOX to the lungs. Cytotoxicity assay was conducted on the A-549 cell line. The results revealed that gelatin-mannosylated-DOX-mesospheres were maximally cytotoxic as compared to free DOX as well as gelatin-DOX-mesospheres. The lung's accumulation of drug was measured and found maximum after administration of M₂. It may, therefore, be inferred that gelatin-mannosylated-DOX-mesospheres are capable to carry bioactive(s) and can be used specifically to target the lung cancer with minimal side effects.

Lipid Vesicles Loaded with an HIV-1 Fusion Inhibitor Peptide as a Potential Microbicide

The effective use of fusion inhibitor peptides against cervical and colorectal infections requires the development of sustained release formulations. In this work we comparatively study two different formulations based on polymeric nanoparticles and lipid vesicles to propose a suitable delivery nanosystem for releasing an HIV-1 fusion inhibitor peptide in vaginal mucosa. Polymeric nanoparticles of poly-d,l-lactic-co-glycolic acid (PLGA) and lipid large unilamellar vesicles loaded with the inhibitor peptide were prepared. Both formulations showed average sizes and polydispersity index values corresponding to monodisperse systems appropriate for vaginal permeation. High entrapment efficiency of the inhibitor peptide was achieved in lipid vesicles, which was probably due to the peptide's hydrophobic nature. In addition, both nanocarriers remained stable after two weeks stored at 4 °C. While PLGA nanoparticles (NPs) did not show any delay in peptide release, lipid vesicles demonstrated favorably prolonged release of the peptide. Lipid vesicles were shown to improve the retention of the peptide on ex vivo vaginal tissue in a concentration sufficient to exert its pharmacological effect. Thus, the small size of lipid vesicles, their lipid-based composition as well as their ability to enhance peptide penetration on vaginal tissue led us to consider this formulation as a better nanosystem than polymeric nanoparticles for the sustained delivery of the HIV-1 fusion inhibitor peptide in vaginal tissues.

Targeted uptake of folic acid-functionalized polymeric nanoparticles loading glycoalkaloidic extract in vitro and in vivo assays

Solanum lycocarpum fruits contain two major glycoalkaloids (GAs), solamargine (SM) and solasonine (SS). These compounds are reported as cytotoxic. However, they have poor water solubility and low bioavailability. To overcome these disadvantages and getting an efficient formulation the current study aimed to develop, characterize, and test the effectiveness of a nanotechnology-based strategy using poly(D,L-lactide) (PLA) nanoparticles functionalized with folate as delivery system of glycoalkaloidic extract (AE) for bladder cancer therapy. The strategic of adding folic acid into nanoformulations can increase the selectivity of the compounds to the cancer cells reducing the side effects. Our results revealed the successful preparation of AE-loaded folate-targeted nanoparticles (NP-F-AE) with particle size around 177 nm, negative zeta potential, polydispersity index <0.20, and higher efficiency of encapsulation for both GAs present in the extract (>85 %). To investigate the cellular uptake, the fluorescent dye coumarin-6 was encapsulated into the nanoparticle (NP-F-C6). The cell studies showed high uptake of nanoparticles by breast (MDA-MB-231) and bladder (RT4) cancer cells, but not for normal keratinocytes cells (HaCaT) indicating the target uptake to cancer cells. The cytotoxicity of nanoparticles was evaluated on RT4 2D culture model showing 2.16-fold lower IC50 than the free AE. Furthermore, the IC50 increased on the RT4 spheroids compared to 2D model. The nanoparticles penetrated homogeneously into the urotheliumof porcine bladder. These results showed that folate-conjugated polymeric nanoparticles are potential carriers for targeted glycoalkaloidic extract delivery to bladder cancer cells.

Development and Characterization of PCL Electrospun Membrane-Coated Bletilla striata Polysaccharide-Based Gastroretentive Drug Delivery System

The purpose of this study was to investigate the potential of Bletilla striata polysaccharide (BSP, a natural glucomannan material) for the development of a gastroretentive drug delivery system for the first time. Novel BSP-based porous wafer was prepared for levofloxacin hydrochloride (LFH) delivery by combining floating, swelling, and mucoadhesion mechanisms. The influences of BSP and ethyl cellulose (EC) on drug release and mucoadhesive strength were studied by 3² factorial design. The optimized matrix was coated with polycaprolactone (PCL) electrospun membrane by electrospinning and heat treatment technology. The optimized formula (F6, coated) exhibited Q_4 h of 41.20 ± 1.90%, Q_8 h of 76.49 ± 1.69%, and mucoadhesive strength of 86.11 ± 1.33 gf, and its drug release profile most closely resembled the Korsmeyer-Peppas model with anomalous diffusion driving mechanism. F6 (coated) also presented excellent buoyancy, preferred swelling characteristic due to the porous structure formed by freeze-drying. Meanwhile, the internal morphology, physical state, drug-excipient compatibility, and thermal behavior were recorded. The negligible cytotoxicity of F6 (coated) was observed in human gastric epithelial cell cultures. In the in vitro antimicrobial experiment, the prepared wafer exhibited obvious bacterial inhibition zone, and due to its longer gastric retention, the wafer also performed a more effective Helicobacter pylori clearance than free LFH in vivo. Graphical abstract.

Core-Shell Fibers: Design, Roles, and Controllable Release Strategies in Tissue Engineering and Drug Delivery

The key attributes of core-shell fibers are their ability to preserve bioactivity of incorporated-sensitive biomolecules (such as drug, protein, and growth factor) and subsequently control biomolecule release to the targeted microenvironments to achieve therapeutic effects. Such qualities are highly favorable for tissue engineering and drug delivery, and these features are not able to be offered by monolithic fibers. In this review, we begin with an overview on design requirement of core-shell fibers, followed by the summary of recent preparation methods of core-shell fibers, with focus on electrospinning-based techniques and other newly discovered fabrication approaches. We then highlight the importance and roles of core-shell fibers in tissue engineering and drug delivery, accompanied by thorough discussion on controllable release strategies of the incorporated bioactive molecules from the fibers. Ultimately, we touch on core-shell fibers-related challenges and offer perspectives on their future direction towards clinical applications.

In vitro evaluation of folate-modified PLGA nanoparticles containing paclitaxel for ovarian cancer therapy

Ovarian cancer is the most lethal gynecological cancer of female reproductive system. In order to improve the survival rate, some modifications on nanoparticles surfaces have been investigated to promote active targeting of drugs into tumor microenvironment. The aim of this study was the development and characterization of folate-modified (PN-PCX-FA) and unmodified PLGA nanoparticles (PN-PCX) containing paclitaxel for ovarian cancer treatment. Nanocarriers were produced using nanoprecipitation technique and characterized by mean particle diameter (MPD), polydispersity index (PDI), zeta potential (ZP), encapsulation efficiency (EE), DSC, FTIR, in vitro cytotoxicity and cellular uptake. PN-PCX and PN-PCX-FA showed MPD < 150 nm and PDI < 0.2 with high EE (about 90%). Cytotoxicity assays in SKOV-3 cells demonstrated the ability of both formulations to cause cellular damage. PCX encapsulated in PN-PCX-FA at 1 nM showed higher cytotoxicity than PN-PCX. Folate-modified nanoparticles showed a 3.6-fold higher cellular uptake than unmodified nanoparticles. PN-PCX-FA is a promising system to improve safety and efficacy of ovarian cancer treatment. Further in vivo studies are necessary to prove PN-PCX-FA potential.

Orthogonal experimental preparation of Sanguis Draconis- Polyvinylpyrrolidone microfibers by electrospinning

How to improve the bioavailability of the Sanguis Draconis (SD) is an important problem in the potential clinical applications. The aim of this study was to develop a drug delivery system to achieve high bioavailability of SD, a drug with poor water solubility. It will promote the research about new formulations of the SD and the other insoluble drugs. In this study, a highly biocompatible hydrophilic polymer, polyvinylpyrrolidone (PVP), was selected as a carrier, mixed with different proportions of SD to produce SD-PVP microfibers by solution electrospinning. By orthogonal experiments, the optimal spinning conditions of the preparation of SD-PVP fibers were investigated. The morphology of different proportions of SD-PVP microfibers was observed by scanning electron microscopy, and the phase characteristics were characterized by Fourier transform infrared spectrometry, X-ray diffraction, and differential scanning calorimetry. The hydrophilic properties of SD-PVP fiber membranes with different SD content were analyzed by the water contact angle assay. In vitro dissolution experiments were carried out to observe the dissolution of drugs in SD-PVP fiber membranes. The results showed that the diameter of SD-PVP fibers increased with the enlargement of SD content. A eutectic mixture was formed after blending PVP and SD, and the hydrogen bonds were formed between the SD and PVP with no chemical reaction occurred. The dispersion of SD in the fiber decreased with the increase of SD content. The higher the content of SD in the fiber, the more hydrophobic the fiber membrane. In vitro dissolution studies revealed that the dissolution content of SD from SD-PVP microfibers was significantly higher than that of the pure or original drug SD. However, as the SD content increased from 15% to 30%, the dissolution of the drug in the SD-PVP fibers decreased. The SD-PVP fiber prepared in this study showed much higher solubility than the original drug in vitro, which has great significance for the development of new dosage forms for the clinical application of SD, and it has a useful reference for the study of similar bioavailability of poorly soluble drugs.