Nanodiamond/poly-ε-caprolactone nanofibrous scaffold for wound management

The recent development of carbon-based nanoparticles as a novel approach to skin tissue care and management - A review

Since the skin is the first barrier of the body's defense against pathogens, delays in the healing process are affected by infections. Therefore, applying advanced substitute assistance improves the patient's quality of life. Carbon-based nanomaterials show better capabilities than conventional methods for managing skin wound infections. Due to their physicochemical properties such as small size, large surface area, great surface-to-volume ratio, and excellent ability to communicate with the cells and tissue, carbon-based nanoparticles have been considered in regenerative medicine. moreover, the carbon nano family offers attractive potential in wound healing via the improvement of angiogenesis and antibacterial compared to traditional approaches become one of the particular research interests in the field of skin tissue engineering. This review emphasizes the wound-healing process and the role of carbon-based nanoparticles in wound care management interaction with tissue engineering technology.

A comprehensive review on the applications of carbon-based nanostructures in wound healing: from antibacterial aspects to cell growth stimulation

A wound is defined as damage to the integrity of biological tissue, including skin, mucous membranes, and organ tissues. The treatment of these injuries is an important challenge for medical researchers. Various materials have been used for wound healing and dressing applications among which carbon nanomaterials have attracted significant attention due to their remarkable properties. In the present review, the latest studies on the application of carbon nanomaterials including graphene oxide (GO), reduced graphene oxide (rGO), carbon dots (CDs), carbon quantum dots (CQDs), carbon nanotubes (CNTs), carbon nanofibers (CNFs), and nanodiamonds (NDs) in wound dressing applications are evaluated. Also, a variety of carbon-based nanocomposites with advantages such as biocompatibility, hemocompatibility, reduced wound healing time, antibacterial properties, cell-adhesion, enhanced mechanical properties, and enhanced permeability to oxygen has been reported for the treatment of various wounds.

Bioactive inorganic particles-based biomaterials for skin tissue engineering

The challenge for treatment of severe cutaneous wound poses an urgent clinical need for the development of biomaterials to promote skin regeneration. In the past few decades, introduction of inorganic components into material system has become a promising strategy for improving performances of biomaterials in the process of tissue repair. In this review, we provide a current overview of the development of bioactive inorganic particles-based biomaterials used for skin tissue engineering. We highlight the three stages in the evolution of the bioactive inorganic biomaterials applied to wound management, including single inorganic materials, inorganic/organic composite materials, and inorganic particles-based cell-encapsulated living systems. At every stage, the primary types of bioactive inorganic biomaterials are described, followed by citation of the related representative studies completed in recent years. Then we offer a brief exposition of typical approaches to construct the composite material systems with incorporation of inorganic components for wound healing. Finally, the conclusions and future directions are suggested for the development of novel bioactive inorganic particles-based biomaterials in the field of skin regeneration.

Liquid metal polymer composite: Flexible, conductive, biocompatible, and antimicrobial scaffold

Gallium and its alloys, such as eutectic gallium indium alloy (EGaIn), a form of liquid metal, have recently attracted the attention of researchers due to their low toxicity and electrical and thermal conductivity for biomedical application. However, further research is required to harness EGaIn-composites advantages and address their application as a biomedical scaffold. In this research, EGaIn-polylactic acid/polycaprolactone composites with and without a second conductive filler, MXene, were prepared and characterized. The addition of MXene, into the EGaIn-composite, can improve the composite's electrochemical properties by connecting the liquid metal droplets resulting in electrically conductive continuous pathways within the polymeric matrix. The results showed that the composite with 50% EGaIn and 4% MXene, displayed optimal electrochemical properties and enhanced mechanical and radiopacity properties. Furthermore, the composite showed good biocompatibility, examined through interactions with fibroblast cells, and antibacterial properties against methicillin-resistant Staphylococcus aureus. Therefore, the liquid metal (EGaIn) polymer composite with MXene provides a first proof-of-concept engineering scaffold strategy with low toxicity, functional electrochemical properties, and promising antimicrobial properties.

Nanodiamond-chitosan functionalized hernia mesh for biocompatibility and antimicrobial activity

Polypropylene (PP) mesh is most commonly used for the treatment of hernia and pelvic floor construction. However, some of the patients have a few complications after surgery due to the rejection or infection of the implanted meshes. The poor biocompatibility of PP mesh, low wettability results in poor cell attachment/proliferation and restricts the loading of antibacterial agent, leading to a slow healing process and high risk of infection after surgery. Here in this study, a new technique has been employed to develop a novel antimicrobial and biocompatible PP mesh modified with bioactive chitosan and functionalized nanodiamond (FND) for infection inhibition and acceleration of the healing process. An oxygen plasma treatment PP mesh was used then chitosan was strongly attached to the surface of the PP fibers. Subsequently, FND as an antibacterial agent was loaded into the chitosan modified PP fiber to provide desired antibacterial functions. The meshes were characterised with XRD, FTIR, SEM, EDX, water contact angle, confocal, and optical microscopy. The modified PP mesh with chitosan and FND showed a significant increase in its hydrophilicity and L929 fibroblast cell attachment. Furthermore, the modified mesh exhibited great antibacterial efficiency against Escherichia coli. Therefore, the newly developed technique to modify PP mesh could be a promising technique to generate a biocompatible PP mesh to accelerate the healing process and reduce the risk of infection after surgery.

Poly (ε-caprolactone)-based electrospun nano-featured substrate for tissue engineering applications: a review

The restoration of normal functioning of damaged body tissues is one of the major objectives of tissue engineering. Scaffolds are generally used as artificial supports and as substrates for regenerating new tissues and should closely mimic natural extracellular matrix (ECM). The materials used for fabricating scaffolds must be biocompatible, non-cytotoxic and bioabsorbable/biodegradable. For this application, specifically biopolymers such as PLA, PGA, PTMC, PCL etc. satisfying the above criteria are promising materials. Poly(ε-caprolactone) (PCL) is one such potential candidate which can be blended with other materials forming blends, copolymers and composites with the essential physiochemical and mechanical properties as per the requirement. Nanofibrous scaffolds are fabricated by various techniques such as template synthesis, fiber drawing, phase separation, self-assembly, electrospinning etc. Among which electrospinning is the most popular and versatile technique. It is a clean, simple, tunable and viable technique for fabrication of polymer-based nanofibrous scaffolds. The design and fabrication of electrospun nanofibrous scaffolds are of intense research interest over the recent years. These scaffolds offer a unique architecture at nano-scale with desired porosity for selective movement of small molecules and form a suitable three-dimensional matrix similar to ECM. This review focuses on PCL synthesis, modifications, properties and scaffold fabrication techniques aiming at the targeted tissue engineering applications.

Preparation, characterization and wound healing effect of alginate/chitosan microcapsules loaded with polysaccharides from Nostoc Commune Vaucher

Biologically active coating materials could promote the growth of granulation tissue as auxiliary materials, while natural polysaccharides could promote vascular regeneration and wound healing. Therefore, in this study, ultrasound-assisted extract of Nostoc commune Vaucher polysaccharides (UAP) yield after the process optimization was 12.89 ± 0.24%, which was used to prepare microcapsules by emulsification and cross-linking. The effect of alginate/chitosan-UAP composite materials on wound healing in an experimental rat model for 14 d and its physical properties were evaluated. In vitro experiments indicated that the UAP microcapsule material had a porous and loose three-dimensional network structure, and had good biocompatibility and swelling properties as a wound healing material. Animal experiments indicated that UAP microcapsules could extremely significantly promote wound healing (P < 0.01), and wound closure rate reached 79.16 ± 3.91% on 14th day. Meanwhile UAP microcapsules might promote angiogenesis and granulation growth by enhancing immunity and increasing the expression of VEGF and miR-21. Therefore, the composites of UAP microcapsules have shown encouraging results as a potential dressing for wound healing.

Human osteoblast-like SAOS-2 cells on submicron-scale fibers coated with nanocrystalline diamond films

A unique composite nanodiamond-based porous material with a hierarchically-organized submicron-nano-structure was constructed for potential bone tissue engineering. This material consisted of submicron fibers prepared by electrospinning of silicon oxide (SiO_x), which were oxygen-terminated (O-SiO_x) and were hermetically coated with nanocrystalline diamond (NCD) films. The NCD films were then terminated with hydrogen (H-NCD) or oxygen (O-NCD). The materials were tested as substrates for the adhesion, growth and osteogenic differentiation of human osteoblast-like Saos-2 cells. The number and the spreading area of the initially adhered cells, their growth rate during 7 days after seeding and the activity of alkaline phosphatase (ALP) were significantly higher on the NCD-coated samples than on the uncoated O-SiO_x samples. In addition, the concentration of type I collagen was significantly higher in the cells on the O-NCD-coated samples than on the bare O-SiO_x samples. The observed differences could be attributed to the tunable wettability of NCD and to the more appropriate surface morphology of the NCD-coated samples in contrast to the less stable, rapidly eroding bare SiO_x surface. The H-NCD coatings and the O-NCD coatings both promoted similar initial adhesion of Saos-2 cells, but the subsequent cell proliferation activity was higher on the O-NCD-coated samples. The concentration of beta-actin, vinculin, type I collagen and alkaline phosphatase (ALP), the ALP activity, and also the calcium deposition tended to be higher in the cells on the O-NCD-coated samples than on the H-NCD-coated samples, although these differences did not reach statistical significance. The improved cell performance on the O-NCD-coated samples could be attributed to higher wettability of these samples (water drop contact angle less than 10°), while the H-NCD-coated samples were hydrophobic (contact angle >70°). NCD-coated porous SiO_x meshes can therefore be considered as appropriate scaffolds for bone tissue engineering, particularly those with an O-terminated NCD coating.

Multifunctional Sutures with Temperature Sensing and Infection Control

The next-generation sutures should provide in situ monitoring of wound condition such as temperature while reducing surgical site infection during wound closure. In this study, functionalized nanodiamond (FND) and reduced graphene oxide (rGO) into biodegradable polycaprolactone (PCL) are incorporated to develop a new multifunctional suture with such capabilities. Incorporation of FND and rGO into PCL enhances its tensile strength by about 43% and toughness by 35%. The sutures show temperature sensing capability in the range of 25-40 °C based on the shift in zero-splitting frequency of the nitrogen-vacancy (NV^- ) centers in FND via optically detected magnetic resonance, paving the way for potential detection of infection or excessive inflammation in healing wounds. The suture surface readily coats with antibiotics to reduce bacterial infection risk to the wounds. The new suture thus is promising in monitoring and supporting wound closure.

Advances in Biodegradable 3D Printed Scaffolds with Carbon-Based Nanomaterials for Bone Regeneration

Bone possesses an inherent capacity to fix itself. However, when a defect larger than a critical size appears, external solutions must be applied. Traditionally, an autograft has been the most used solution in these situations. However, it presents some issues such as donor-site morbidity. In this context, porous biodegradable scaffolds have emerged as an interesting solution. They act as external support for cell growth and degrade when the defect is repaired. For an adequate performance, these scaffolds must meet specific requirements: biocompatibility, interconnected porosity, mechanical properties and biodegradability. To obtain the required porosity, many methods have conventionally been used (e.g., electrospinning, freeze-drying and salt-leaching). However, from the development of additive manufacturing methods a promising solution for this application has been proposed since such methods allow the complete customisation and control of scaffold geometry and porosity. Furthermore, carbon-based nanomaterials present the potential to impart osteoconductivity and antimicrobial properties and reinforce the matrix from a mechanical perspective. These properties make them ideal for use as nanomaterials to improve the properties and performance of scaffolds for bone tissue engineering. This work explores the potential research opportunities and challenges of 3D printed biodegradable composite-based scaffolds containing carbon-based nanomaterials for bone tissue engineering applications.

Nanodiamonds for bioapplications, recent developments

The world of biomedical research is in constant evolution, requiring more and more conditions and norms through pre-clinic and clinic studies. Nanodiamonds (NDs) with exceptional optical, thermal and mechanical properties emerged on the global scientific scene and recently gained more attention in biomedicine and bioanalysis fields. Many problematics have been deliberated to better understand their in vitro and in vivo efficiency and compatibility. Light was shed on their synthesis, modification and purification steps, as well as particle size and surface properties in order to find the most suitable operating conditions. In this review, we present the latest advances of NDs use in bioapplications. A large variety of subjects including anticancer and antimicrobial systems, wound healing and tissue engineering management tools, but also bioimaging and labeling probes are tackled. The key information resulting from these recent works were evidenced to make an overview of the potential features of NDs, with a special look on emerging therapeutic and diagnosis combinations.

A brief review concerning the latest advances in the influence of nanoparticle reinforcement into polymeric-matrix biomaterials

Nanoparticles (NPs) have been studied for a wide variety of applications, due to the elevated surface area and outstanding properties. Several types of NPs are available nowadays, each one with particular characteristics and challenges. Bionanocomposites, especially composed by polymer matrices, are gaining attention in the biomedical field. Although, several studies have shown the potential of adding NPs into these materials, some investigation is still needed until their clinical use for in vivo application is consummated. Besides that, is essential to evaluate whether the addition of nanoparticles changes the matrix property. In this review, we summarize the latest advances concerning polymeric bionanocomposites incorporated with organic (polymeric, cellulosic, carbon-based), and inorganic (metallic, magnetics, and metal oxide) NPs.

Healing of Full-Thickness Murine Skin Wounds Containing Nanofibers Using Splints for Efficient Reepithelialization and to Avoid Contracture

Wound healing process is the outcome of a series of actions and combined with collaborative process involving concerted efforts of multiple cell types. The dynamic series of events constituting each of these overlapping rather than discrete stages of wound healing increases its complexity and the necessity to understand it. The contrasting mechanisms of wound healing employed by mouse (via wound contraction) and humans (via reepithelialization) puts forth the need of a model closely mimicking human wound-healing and hence comes the applicability of the mouse excisional wound splinting model. Use of silicone-based splints has demonstrated their effectiveness in aptly resembling the human reepithelialization mediated wound healing by preventing contraction during healing. The rising popularity of nanofiber-based treatments for wound healing through sustained release of factors/molecules promoting wound closure can be potentially implemented in association with this model to determine its efficacy in wound management in a more humanized way.

High Nanodiamond Content-PCL Composite for Tissue Engineering Scaffolds

Multifunctional scaffolds are becoming increasingly important in the field of tissue engineering. In this research, a composite material is developed using polycaprolactone (PCL) and detonation nanodiamond (ND) to take advantage of the unique properties of ND and the biodegradability of PCL polymer. Different ND loading concentrations are investigated, and the physicochemical properties of the composites are characterized. ND-PCL composite films show a higher surface roughness and hydrophilicity than PCL alone, with a slight decrease in tensile strength and a significant increase in degradation. Higher loading of ND also shows a higher osteoblast adhesion than the PCL alone sample. Finally, we show that the ND-PCL composites are successfully extruded to create a 3D scaffold demonstrating their potential as a composite material for tissue regeneration.

Fabrication and Biocompatibility Evaluation of Nanodiamonds-Gelatin Electrospun Materials Designed for Prospective Tissue Regeneration Applications

Due to the reduced ability of most harmed tissues to self-regenerate, new strategies are being developed in order to promote self-repair assisted or not by biomaterials, among these tissue engineering (TE). Human adipose-derived mesenchymal stem cells (hASCs) currently represent a promising tool for tissue reconstruction, due to their low immunogenicity, high differentiation potential to multiple cell types and easy harvesting. Gelatin is a natural biocompatible polymer used for regenerative applications, while nanodiamond particles (NDs) are used as reinforcing nanomaterial that might modulate cell behavior, namely cell adhesion, viability, and proliferation. The development of electrospun microfibers loaded with NDs is expected to allow nanomechanical sensing due to local modifications of both nanostructure and stiffness. Two aqueous suspensions with 0.5 and 1% w/v NDs in gelatin from cold water fish skin (FG) were used to generate electrospun meshes. Advanced morpho- and micro-structural characterization revealed homogeneous microfibers. Nanoindentation tests confirmed the reinforcing effect of NDs. Biocompatibility assays showed an increased viability and proliferation profile of hASCs in contact with FG_NDs, correlated with very low cytotoxic effects of the materials. Moreover, hASCs developed an elongated cytoskeleton, suggesting that NDs addition to FG materials encouraged cell adhesion. This study showed the FG_NDs fibrous scaffolds potential for advanced TE applications.

Morphology and Properties of Electrospun PCL and Its Composites for Medical Applications: A Mini Review

Polycaprolactone (PCL) is one of the most used synthetic polymers for medical applications due to its biocompatibility and slow biodegradation character. Combining the inherent properties of the PCL matrix with the characteristic of nanofibrous particles, result into promising materials that can be suitable for different applications, including the biomedical applications. The advantages of nanofibrous structures include large surface area, a small diameter of pores and a high porosity, which make them of great interest in different applications. Electrospinning, as technique, has been heavily used for the preparation of nano- and micro-sized fibers. This review discusses the different methods for the electrospinning of PCL and its composites for advanced applications. Furthermore, the steady state conditions as well as the effect of the electrospinning parameters on the resultant morphology of the electrospun fiber are also reported.