A one pot multi-component CuAAC “click” approach to bidentate and tridentate pyridyl-1,2,3-triazole ligands: Synthesis, X-ray structures and copper(II) and silver(I) complexes

Selective Sequestration of Palladium(II) Cations Using a Supramolecular Polymer Approach

The selective sequestration of aqueous palladium from waste is an attractive option for metal recovery. However, achieving good metal specificity remains a difficult problem. In this study, we present the synthesis of a metallo-supramolecular system based on a 2-pyridyl-1,2,3-triazole chelating ligand group. Excellent selectivity for Pd(II) ions over Pt(II), Ni(II), Fe(II), Co(II), and Zn(II) from a mixed-metal solution was demonstrated through ESI-MS and 1H NMR spectroscopic studies of a model ligand system. Following this, a water-soluble copolymer system containing 2-pyridyl-1,2,3-triazole functional groups was prepared. This polymer was shown to exhibit the same specificity for Pd(II) in a mixed-metal solution, quantitatively supported by dialysis and ICP-MS experiments. These findings demonstrate the potential of metallo-supramolecular polymers in selective metal recovery.

1,2,3-Triazol-5-ylidene- vs. 1,2,3-triazole-based tricarbonylrhenium(I) complexes: influence of a mesoionic carbene ligand on the electronic and biological properties

The tricarbonylrhenium complexes that incorporate a mesoionic carbene ligand represent an emerging and promising class of molecules, the solid-state optical properties of which have rarely been investigated. The aim of this comprehensive study is to compare three of these complexes with their 1,2,3-triazole-based analogues. The Hirshfeld surface analysis of the crystallographic data revealed that the triazolylidene derivatives are more prone to π-π interactions than their 1,2,3-triazole-based counterparts. The FT-IR and electrochemical data indicated a stronger electron donor effect from the organic ligand to the rhenium atom for triazolylidene derivatives, which was confirmed by DFT calculations. All compounds were phosphorescent in solution, where the 1,2,3-triazole-based complexes showed unusually strong dependence on dissolved oxygen. All compounds also emitted in the solid state, some of them exhibited marked solid-state luminescence enhancement (SLE) effect. The 1,2,3-triazole based complex Re-Phe even displayed astounding photoluminescence efficiency with quantum yield up to 0.69, and proved to be an excellent candidate for applications linked to aggregation-induced emission (AIE). Interestingly, one triazolylidene-based complex (Re-T-BOP) showed attractive antibacterial activity. This study highlights the potential of these new molecules for applications in the fields of photoluminescent and therapeutic materials, and provides the first bases for the design of efficient molecules in these research areas.

Ferrocenyl-triazole complexes and their use in heavy metal cation sensing

Complexes tris((1-ferrocenyl-1H-1,2,3-triazol-4-yl)methyl)amine (3), bis((1-ferrocenyl-1H-1,2,3-triazol-4-yl)methyl)amine (6), bis((1-ferrocenyl-1H-1,2,3-triazol-4-yl)methyl)ether (7), and 1-ferrocenyl-1H-1,2,3-triazol-4-yl)methanamine (9) were synthesized using the copper-catalyzed click reaction. Complexes 3, 6, 7, and 9 were characterized using NMR (1H and 13{1H}) and IR spectroscopy, elemental analysis, and mass spectrometry. Structures of 3, 7, and 9 in the solid state were determined using single-crystal X-ray diffraction. It was found that the triazole rings were planar and slightly twisted with respect to the cyclopentadienyl groups attached to them. Chains and 3D network structures were observed due to the presence of π⋯π and C-H⋯N interactions between the cyclopentadienyl and triazole ligands. A reversible redox behavior of the Fc groups between 239 and 257 mV with multicycle stability was characteristic for all the compounds, revealing that the electrochemically generated species Fc+ remained soluble in dichloromethane. Electrochemical sensor tests demonstrated the applicability of all the complexes to enhance the quantification sensing behavior of the screen-printed carbon electrode (SPCE) toward Cd2+, Pb2+, and Cu2+ ions.

Photochemistry of Ru(II) Triazole Complexes with 6-Membered Chelate Ligands: Detection and Reactivity of Ligand-Loss Intermediates

Photochemical ligand release from metal complexes may be exploited in the development of novel photoactivated chemotherapy agents for the treatment of cancer and other diseases. Highly intriguing photochemical behavior is reported for two ruthenium(II) complexes bearing conformationally flexible 1,2,3-triazole-based ligands incorporating a methylene spacer to form 6-membered chelate rings. [Ru(bpy)2(pictz)]2+ (1) and [Ru(bpy)2(btzm)]2+ (2) (bpy = 2,2'-bipyridyl; pictz = 1-(picolyl)-4-phenyl-1,2,3-triazole; btzm = bis(4-phenyl-1,2,3-triazol-4-yl)methane) exhibit coordination by the triazole ring through the less basic N2 atom as a consequence of chelation and readily undergo photochemical release of the pictz and btzm ligands (ϕ = 0.079 and 0.091, respectively) in acetonitrile solution to form cis-[Ru(bpy)2(NCMe)2]2+ (3) in both cases. Ligand-loss intermediates of the form [Ru(bpy)2(κ1-pictz or κ1-btzm)(NCCD3)]2+ are detected by 1H NMR spectroscopy and mass spectrometry. Photolysis of 1 yields three ligand-loss intermediates with monodentate pictz ligands, two of which form through simple decoordination of either the pyridine or triazole donor with subsequent solvent coordination (4-tz(N2) and 4-py, respectively). The third intermediate, shown to be able to form photochemically directly from 1, arises through linkage isomerism in which the monodentate pictz ligand is coordinated by the triazole N3 atom (4-tz(N3)) with a comparable ligand-loss intermediate with an N3-bound κ1-btzm ligand also observed for 2.

Click-derived multifunctional metal complexes for diverse applications

The Click reaction that involves Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) serves as the most potent and highly dependable tool for the development of many complex architectures. It has paved the way for the synthesis of numerous drug molecules with enhanced synthetic flexibility, reliability, specificity and modularity. It is all about bringing two different molecular entities together to achieve the required molecular properties. The utilization of Click chemistry has been well demonstrated in organic synthesis, particularly in reactions that involve biocompatible precursors. In pharmaceutical research, Click chemistry is extensively utilized for drug delivery applications. The exhibited bio-compatibility and dormancy towards other biological components under cellular environments makes Click chemistry an identified boon in bio-medical research. In this review, various click-derived transition metal complexes are discussed in terms of their applications and uniqueness. The scope of this chemistry towards other streams of applied sciences is also discussed.

Synthesis, characterisation and biological evaluation of monometallic Re(I) and heterobimetallic Re(I)/Fe(II) complexes with a 1,2,3-triazolyl pyridine chelating moiety

Bioorganometallic complexes have attracted considerable interest and have shown promise for potential application in the treatment and diagnosis of cancer, as well as bioimaging agents, some acting as theranostic agents. The series of novel ferrocene, benzimidazo[1,2-a]quinoline and fluorescein derivatives with bidentate pyridyl-1,2,3-triazole and 2,2'-dipyridylamine and their tricarbonylrhenium(I) complexes was prepared and fully characterised by NMR, single-crystal X-ray diffraction, UV-Vis and fluorescence spectroscopy in biorelevant conditions. The fluorescein and benzimidazo[1,2-a]quinoline ligands and their complexes with Re(I) showed interactions with ds-DNA/RNA and HSA, characterised by thermal denaturation measurements, fluorimetric and circular dichroism titrations. The binding constants revealed that addition of Re(I) increases the affinity of fluorescein but decreases the affinity of benzimidazo[1,2-a]quinoline. The complexation of Re(I) had the opposite effect on fluorescein and benzimidazo[1,2-a]quinoline ligands' fluorimetric sensitivity upon biomacromolecule binding, Re(I) fluorescein complex emission being strongly quenched by DNA/RNA or HSA, while emission of Re(I) benzimidazo[1,2-a]quinolone complex was enhanced, particularly for HSA, making it a promising fluorescent probe. Some mono- and heterobimetallic complexes showed considerable antiproliferative activity on colon cancer cells (CT26 and HT29), with ferrocene dipyridylamine complexes exhibiting the best inhibitory activity, comparable to cisplatin. The correlation of the cytotoxicity data with the linker type between the ferrocene and the 1,2,3-triazole ring suggests that direct binding of the metallocene to the 1,2,3-triazole is favourable for antitumor activity. The Re(I) benzimidazo[1,2-a]quinolone complex showed moderate antiproliferative activity, in contrast to the Re(I) fluorescein complex, which exhibited weak activity on CT26 cells and no activity on HT29 cells. The accumulation of the Re(I) benzimidazo[1,2-a]quinolone complex in the lysosomes of CT26 cells indicates the site of its bioactivity, thus making this complex a potential theranostic agent.

Spin Crossover and Thermochromism in Iron(II) Complexes with 2,6-Bis(1H-imidazol-2-yl)-4-methoxypyridine

New iron(II) complexes with 2,6-bis(1H-imidazol-2-yl)-4-methoxypyridine (L) of the composition [FeL₂]A_n∙mH₂O (A = SO₄^2-, n = 1, m = 2 (I); A = ReO₄^-, n = 2, m = 1 (II); A = Br^-, n = 2, m = 2 (III)) have been synthesized and investigated. To determine the coordination ability of the ligand, a single crystal of a copper(II) complex of the composition [CuLCl₂] (IV) was obtained and studied by X-ray technique. Compounds I-III were studied using methods of X-ray phase analysis, electron (diffuse reflection spectra), infrared and Mössbauer spectroscopy, static magnetic susceptibility. The study of the µ_eff(T) dependence showed that the ¹A₁ ↔ ⁵T₂ spin crossover manifests itself in the compounds. The spin crossover is accompanied by thermochromism: there is a distinct color change orange ↔ red-violet.

Direct Determination of the Rate of Intersystem Crossing in a Near-IR Luminescent Cr(III) Triazolyl Complex

A detailed understanding of the dynamics of photoinduced processes occurring in the electronic excited state is essential in informing the rational design of photoactive transition-metal complexes. Here, the rate of intersystem crossing in a Cr(III)-centered spin-flip emitter is directly determined through the use of ultrafast broadband fluorescence upconversion spectroscopy (FLUPS). In this contribution, we combine 1,2,3-triazole-based ligands with a Cr(III) center and report the solution-stable complex [Cr(btmp)₂]³⁺ (btmp = 2,6-bis(4-phenyl-1,2,3-triazol-1-yl-methyl)pyridine) (1³⁺), which displays near-infrared (NIR) luminescence at 760 nm (τ = 13.7 μs, ϕ = 0.1%) in fluid solution. The excited-state properties of 1³⁺ are probed in detail through a combination of ultrafast transient absorption (TA) and femtosecond-to-picosecond FLUPS. Although TA spectroscopy allows us to observe the evolution of phosphorescent excited states within the doublet manifold, more significantly and for the first time for a complex of Cr(III), we utilize FLUPS to capture the short-lived fluorescence from initially populated quartet excited states immediately prior to the intersystem crossing process. The decay of fluorescence from the low-lying ⁴MC state therefore allows us to assign a value of (823 fs)^-1 to the rate of intersystem crossing. Importantly, the sensitivity of FLUPS to only luminescent states allows us to disentangle the rate of intersystem crossing from other closely associated excited-state events, something which has not been possible in the spectroscopic studies previously reported for luminescent Cr(III) systems.

Generating water/MeOH-soluble and luminescent polymers by grafting 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligands onto a poly(ethylene-alt-maleic anhydride) polymer and cross-linking with terbium(III)

The synthesis of two new polymers made from P(E-alt-MA) (poly(ethylene-alt-maleic anhydride) and possessing 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligand side chains in 3 and 6 mol%, respectively (P1 and P2, respectively) is described. These polymers were shown to be soluble in MeOH solution and, in the case of P1, also in water, while P2 needed prolonged heating to enable water dissolution. Btp ligands are known for coordinating both d- and f-metal ions and so, herein, we demonstrate by using both UV-Vis absorption, fluorescence emission, as well as time-gated phosphorescence spectroscopies, that both P1 and P2 can bind to Tb(III) ions to give rise to luminescent polymers. From the analysis of the titration data, which demonstrated large changes in the emission intensity properties of the polymer upon Tb(III) binding (ground state changes were also clearly observed, with the absorption being red-shifted at lower energy), we show that the dominant stoichiometry in solution is 1 : 2 (M : L; Tb(III) : btp ratio) which implies that two btp ligands from the polymer background are able to crosslink through lanthanide coordination and that the backbone of the polymer is very likely to aid in coordinating the ions.

Versatile Synthetic Platform for 1,2,3-Triazole Chemistry

1,2,3-Triazole scaffolds are not obtained in nature, but they are still intensely investigated by synthetic chemists in various fields due to their excellent properties and green synthetic routes. This review will provide a library of all synthetic routes used in the past 21 years to synthesize 1,2,3-triazoles and their derivatives using various metal catalysts (such as Cu, Ni, Ru, Ir, Rh, Pd, Au, Ag, Zn, and Sm), organocatalysts, metal-free as well as solvent- and catalyst-free neat syntheses, along with their mechanistic cycles, recyclability studies, solvent systems, and reaction condition effects on regioselectivity. Constant developments indicate that 1,2,3-triazoles will help lead to future organic synthesis and are useful for creating molecular libraries of various functionalized 1,2,3-triazoles.

Azides in the Synthesis of Various Heterocycles

In this review, we focus on some interesting and recent examples of various applications of organic azides such as their intermolecular or intramolecular, under thermal, catalyzed, or noncatalyzed reaction conditions. The aforementioned reactions in the aim to prepare basic five-, six-, organometallic heterocyclic-membered systems and/or their fused analogs. This review article also provides a report on the developed methods describing the synthesis of various heterocycles from organic azides, especially those reported in recent papers (till 2020). At the outset, this review groups the synthetic methods of organic azides into different categories. Secondly, the review deals with the functionality of the azido group in chemical reactions. This is followed by a major section on the following: (1) the synthetic tools of various heterocycles from the corresponding organic azides by one-pot domino reaction; (2) the utility of the chosen catalysts in the chemoselectivity favoring C-H and C-N bonds; (3) one-pot procedures (i.e., Ugi four-component reaction); (4) nucleophilic addition, such as Aza-Michael addition; (5) cycloaddition reactions, such as [3+2] cycloaddition; (6) mixed addition/cyclization/oxygen; and (7) insertion reaction of C-H amination. The review also includes the synthetic procedures of fused heterocycles, such as quinazoline derivatives and organometal heterocycles (i.e., phosphorus-, boron- and aluminum-containing heterocycles). Due to many references that have dealt with the reactions of azides in heterocyclic synthesis (currently more than 32,000), we selected according to generality and timeliness. This is considered a recent review that focuses on selected interesting examples of various heterocycles from the mechanistic aspects of organic azides.

A Catalogue of Orthogonal Complementary Ligand Pairings for Palladium(II) Complexes

Molecular recognition is a form of information transfer, seen in the base pairing in DNA which is derived from the identity (acceptor or donor) and number of hydrogen bond sites within each base. Here we report bis-ligand palladium(II) complexes that exhibit similar complementarity. Pd(II) has square planar four-coordinate geometry, giving control over ligand orientation and denticity. Pairings were developed using ligand denticity (3 : 1 or 2 : 2), and hydrogen bond capability (AA:DD or AD:DA) or lack thereof. Five pairings were investigated, with two sets of four being found fully orthogonal. The two 3 : 1 pairings exhibited limited ligand exchange. The extent of this exchange varied dependant on solvent from 2 : 1 (desired to undesired) to 6 : 1. A reliable and varied set of ligand pairs have therefore been developed for bis-ligand coordination sphere engineering in pursuit of sorting for complex molecular architectures and molecular-level information storage and transfer events.

Can 2-Pyridyl-1,2,3-triazole "Click" Ligands be Used to Develop Cu(I)/Cu(II) Molecular Switches?

Molecular switching processes are important in a range of areas including the development of molecular machines. While there are numerous organic switching systems available, there are far less examples that exploit inorganic materials. The most common inorganic switching system remains the copper(I)/copper(II) switch developed by Sauvage and co-workers over 20 years ago. Herein, we examine if bidentate 2-(1-benzyl-1H-1,2,3-triazol-4-yl)pyridine (pytri) and tridentate 2,6-bis[(4-phenyl-1H-1,2,3-triazol-1-yl)methyl]pyridine (tripy) moieties can be used to replace the more commonly exploited polypyridyl ligands 2,2'-bypyridine (bpy)/1,10-phenanthroline (phen) and 2,2';6',2″-terpyridine (terpy) in a copper(I)/(II) switching system. Two new ditopic ligands that feature bidentate (pytri, L1 or bpytri, L2) and tridentate tripy metal binding pockets were synthesized and used to generate a family of heteroleptic copper(I) and copper(II) 6,6'-dimesityl-2,2'-bipyridine (diMesbpy) complexes. Additionally, we synthesized a series of model copper(I) and copper(II) diMesbpy complexes. A combination of techniques including nuclear magnetic resonance (NMR) and UV-vis spectroscopies, high-resolution electrospray ionization mass spectrometry, and X-ray crystallography was used to examine the behavior of the compounds. It was found that L1 and L2 formed [(diMesbpy)Cu(L1 or L2)]²⁺ complexes where the copper(II) diMesbpy unit was coordinated exclusively in the tridenate tripy binding site. However, when the ligands (L1 and L2) were complexed with copper(I) diMesbpy units, a complex mixture was obtained. NMR and MS data indicated that a 1:1 stoichiometry of [Cu(diMesbpy)]⁺ and either L1 or L2 generated three complexes in solution, the dimetallic [(diMesbpy)₂Cu₂(L1 or L2)]²⁺ and the monometallic [(diMesbpy)Cu(L1 or L2)]⁺ isomers where the [Cu(diMesbpy)]⁺ unit is coordinated to either the bidentate or tridentate tripy binding sites of the ditopic ligands. The dimetallic [(diMesbpy)₂Cu₂(L1 or L2)](PF₆)₂ complexes were structurally characterized using X-ray crystallography. Both complexes feature a [Cu(diMesbpy)]⁺ coordinated to the bidentate (pytri or bpytri) pocket of the ditopic ligands (L1 or L2), as expected. They also feature a second [Cu(diMesbpy)]⁺ coordinated to the nominally tridentate tripy binding site in a four-coordinate hypodentate κ²-fashion. Competition experiments with model complexes showed that the binding strength of the bidentate pytri is similar to that of the κ²-tripy ligand, leading to the lack of selectivity. The results suggest that the pytri/tripy and bpytri/tripy ligand pairs cannot be used as replacements for the more common bpy/phen-terpy partners due to the lack of selectivity in the copper(I) state.

Water-Compatible Synthesis of 1,2,3-Triazoles under Ultrasonic Conditions by a Cu(I) Complex-Mediated Click Reaction

A new monophosphine Cu(I) complex bearing bis(pyrazolyl)methane (L 1 ) (CuIL 1 PPh 3 ) was synthesized and used as a catalyst for the three-component click reaction from an alkyl halide, sodium azide, and terminal alkyne to furnish 1,4-disubstituted 1,2,3-triazoles in up to 93% yield. The catalyst is highly stable, compatible with oxygen/water, and works with total efficiency under ultrasonic condition. The structure of the complex was studied and confirmed by X-ray crystallography, finding a riveting relationship with its catalytic activity. This sustainable triazoles synthesis is distinguished by its high atom economy, low catalyst loading (up to 0.5 mol %), broad substrate scope, short reaction times, operational simplicity, and an easy gram-scale supply of a functionalized product for subsequent synthetic applications.

Synthesis and crystal structure of 1,1'-bis-{[4-(pyridin-2-yl)-1,2,3-triazol-1-yl]meth-yl}ferrocene, and its complexation with CuI

The title compound, [Fe(C13H11N4)2], was synthesized starting from 1,1'-ferro-cene-di-carb-oxy-lic acid in a three-step reaction sequence. The di-carb-oxy-lic acid was reduced to 1,1'-ferrocenedi-methanol using LiAlH4 and subsequently converted to 1,1'-bis-(azido-meth-yl)ferrocene in the presence of NaN3. The diazide was treated with 2-ethynyl-pyridine under 'click' conditions to give the title compound in 75% yield. The FeII center lies on an inversion center in the crystal. The two pyridyl-triazole wings are oriented in an anti conformation and positioned exo from the FeII center. In the solid state, the mol-ecules inter-act by C-H⋯N, C-H⋯π, and π-π inter-actions. The complexation of the ligand with [Cu(CH3CN)4](PF6) gives a tetra-nuclear dimeric complex.

Ru(II) coordination compounds of N-N bidentate chelators with 1,2,3 triazole and isoquinoline subunits: Synthesis, spectroscopy and antimicrobial properties

Bidentate chelators 1-(1-benzyl-1,2,3-triazol-4-yl)isoquinoline and 3-(1-benzyl-1,2,3-triazol-4-yl)isoquinoline were prepared from benzyl bromide and trimethylsilylethynylisoquinoline precursors using a tandem deprotection/substitution/CuAAC synthetic approach. Each chelator is capable of forming a stable 3:1 Ru(II) coordination compound, which forms as a geometric isomer mixture. These Ru(II) complexes possess unique MLCT absorbance signatures at 450/472 nm (1-isomer) and 367 nm (3-isomer) relative to their constituent chelating units. Minimum inhibitory concentration values as low as 0.4 μM are observed for Ru(II) complexes against representative Gram-positive bacteria Bacillus subtilis and Staphylococcus epidermidis. Comparing the MIC values of these isoquinoline compounds with analogous 2-(1-benzyl-1,2,3-triazol-4-yl)pyridine compounds shows a 2.5- to 40-fold improvement in potency. This study establishes that increased hydrophobicity introduced at the central chelating units of Ru(II) coordination compounds can be a useful means by which to optimize antimicrobial activity that is complimentary to the variation of peripheral substituent identity at the chelator's N1 triazole position.

Two isomers of [1-benzyl-4-(pyridin-2-yl-κN)-1H-1,2,3-triazole-κN 3]di-chlorido-bis-(dimethyl sulfoxide-κS)ruthenium(II)

The structures of two isomers of the title compound, [RuCl2(C14H12N4)(C2H6OS)2], 2 and 3, are reported. Isomers 2 and 3 are produced by reaction of the pyridyl-triazole ligand 1-benzyl-4-(pyridin-2-yl)-1H-1,2,3-triazole (bpt) (1) with fac-[RuCl2(DMSO-S)3(DMSO-O)]. Reaction in acetone produces ca 95% 2, which is the OC-6-14 isomer, with cis DMSO and trans chlorido ligands, and 5% 3 (the OC-6-32 isomer, with cis DMSO and cis chlorido ligands, and the pyridyl moiety of bpt trans to DMSO). Reaction in refluxing toluene initially forms 2, which slowly isomerizes to 3.

Crystal structure of 4-tert-butyl-1-(2,6-dimethylphenyl)-1H-1,2,3-triazole, C14H19N3

C14H19N3, orthorhombic, Pca21 (no. 29), a = 22.2821(8) Å, b = 10.8464(4) Å, c = 10.8509(4) Å, V = 2622.5(2) Å3, Z = 8, Rgt (F) = 0.0318, wR ref(F 2) = 0.0865, T = 100(2) K.

Observation of an Inversion in Photophysical Tuning in a Systematic Study of Luminescent Triazole-Based Osmium(II) Complexes

In a systematic survey of luminescent bis(terdentate) osmium(II) complexes, a tipping point involving a reversal in photophysical tuning is observed whereby increasing stabilization of the ligand-based lowest unoccupied molecular orbital (LUMO) results in a blue shift in the optical absorption and emission bands. The complexes [Os(N^N'^N″)₂]²⁺ [N^N'^N″ = 2,6-bis(1-phenyl-1,2,3-triazol-4-yl)pyridine (Os1), 2,6-bis(1-benzyl-1,2,3-triazol-4-yl)pyrazine (Os2), 6-(1-benzyl-1,2,3-triazol-4-yl)-2,2'-bipyridyl (Os3), 2-(pyrid-2-yl)-6-(1-benzyl-1,2,3-triazol-4-yl)pyrazine (Os4), 2-(pyrazin-2-yl)-6-(1-benzyl-1,2,3-triazol-4-yl)pyridine (Os5), and 6-(1-benzyl-1,2,3-triazol-4-yl)-2,2'-bipyrazinyl (Os6)] have been prepared and characterized, and all complexes display phosphorescence ranging from the orange to near-IR regions of the spectrum. Replacement of the central pyridine in the ligands of Os1 by the more π-accepting pyrazine in Os2 results in a 55 nm red shift in the triplet metal-to-ligand charge-transfer-based emission band, while a larger red shift of 107 nm is observed for the replacement of one of the triazole donors in the ligands of Os1 by a second pyridine ring in Os3 (λ^em_max = 702 nm). Interestingly, replacement of the central pyridine ring in the ligands of Os3 by pyrazine (Os4, λ^em_max = 702 nm) fails to result in a further red shift in the emission band. Reversal of the relative positions of the pyridine and pyrazine donors in Os5 (λ^em_max = 733 nm) compared to Os4 does indeed result in the expected red shift in the emission with respect to that for Os3 based on the increased π-acceptor character of the ligands present. However, an inversion in emission tuning is observed for Os6, in which the incorporation of a second pyrazine donor in the ligand architecture results in a blue shift in the optical absorption and emission maxima (λ^em_max = 710 nm). Electrochemical studies reveal that while incorporating pyrazine in the ligands indeed results in an expected anodic shift in the first reduction potential through stabilization of the ligand-based LUMO, there is also a concomitant anodic shift in the Os^II/Os^III-based oxidation potential. This stabilization of the metal-based highest occupied molecular orbital (HOMO) thus nullifies the effect of stabilization of the LUMO in Os4 compared to Os3, resulting in these complexes having coincident emission maxima. For Os6, stabilization of the HOMO through the incorporation of two pyrazine donors in the ligand structure now exceeds stabilization of the LUMO, resulting in a larger HOMO-LUMO gap and a counterintuitive blue shift in the optical properties in comparison with those of Os5. While it is known that the replacement of ligands (e.g., replacing bipyridyl with bipyrazinyl) can result in a larger HOMO-LUMO energy gap through greater stabilization of the HOMO, these results importantly allow us to capture the tipping point at which this inversion in photophysical tuning occurs. This therefore enables us to explore the limits available in emission tuning with a relatively simple and minimalist ligand structure.

Revisiting ring-degenerate rearrangements of 1-substituted-4-imino-1,2,3-triazoles

The 1-substituted-4-imino-1,2,3-triazole motif is an established component of coordination compounds and bioactive molecules, but depending on the substituent identity, it can be inherently unstable due to Dimroth rearrangements. This study examined parameters governing the ring-degenerate rearrangement reactions of 1-substituted-4-imino-1,2,3-triazoles, expanding on trends first observed by L’abbé et al. The efficiency of condensation between 4-formyltriazole and amine reactants as well as the propensity of imine products towards rearrangement was each strongly influenced by the substituent identity. It was observed that unsymmetrical condensation reactions conducted at 70 °C produced up to four imine products via a dynamic equilibrium of condensation, rearrangement and hydrolysis steps. Kinetic studies utilizing 1-(4-nitrophenyl)-1H-1,2,3-triazole-4-carbaldehyde with varying amines showed rearrangement rates sensitive to both steric and electronic factors. Such measurements were facilitated by a high throughput colorimetric assay to directly monitor the generation of a 4-nitroaniline byproduct.

Computational investigations of click-derived 1,2,3-triazoles as keystone ligands for complexation with transition metals: a review

In recent years, metal complexes of organo 1,2,3-triazole click-derived ligands have attracted significant attention as catalysts in many chemical transformations and also as biological and pharmaceutical active agents. Regarding the important applications of these metal-organo 1,2,3-triazole-based complexes, in this review, we focused on the recently reported investigations of the structural, electronic, and spectroscopic aspects of the complexation process in transition metal complexes of 1,2,3-triazole-based click ligands. In line with this, the coordination properties of these triazole-based click ligands with transition metals were studied via several quantum chemistry calculations. Moreover, considering the complexation process, we have presented comparative discussions between the computational results and the available experimental data.

Metallosupramolecular Architectures Formed with Ferrocene-Linked Bis-Bidentate Ligands: Synthesis, Structures, and Electrochemical Studies

The self-assembly of ligands of different geometries with metal ions gives rise to metallosupramolecular architectures of differing structural types. The rotational flexibility of ferrocene allows for conformational diversity, and, as such, self-assembly processes with 1,1'-disubstituted ferrocene ligands could lead to a variety of interesting architectures. Herein, we report a small family of three bis-bidentate 1,1'-disubstituted ferrocene ligands, functionalized with either 2,2'-bipyridine or 2-pyridyl-1,2,3-triazole chelating units. The self-assembly of these ligands with the (usually) four-coordinate, diamagnetic metal ions Cu(I), Ag(I), and Pd(II) was examined using a range of techniques including ¹H and DOSY NMR spectroscopies, high-resolution electrospray ionization mass spectrometry, X-ray crystallography, and density functional theory calculations. Additionally, the electrochemical properties of these redox-active metallosupramolecular assemblies were examined using cyclic voltammetry and differential pulse voltammetry. The copper(I) complexes of the 1,1'-disubstituted ferrocene ligands were found to be coordination polymers, while the silver(I) and palladium(II) complexes formed discrete [1 + 1] or [2 + 2] metallomacrocyclic architectures.

Jahn–Teller distortion in 2-pyridyl-(1,2,3)-triazole-containing copper(ii) compounds

Octahedral copper(ii) compounds, containing two 2-pyridyl-(1,2,3)-triazole ligands as well as two Cl ions, exhibit elongation Jahn–Teller distortion.

Palladium pincer-type complexes and zwitterionic sulfur adducts of pyridine-bridged bis(1,2,3-triazolin-5-ylidenes): syntheses, characterizations and catalytic applications

Different reactivities of pincer-type pyridine-bridged bis(mesoionic carbenes) towards palladium(ii) and elemental sulfur have been revealed.

Novel Triazole Hybrids of Betulin: Synthesis and Biological Activity Profile

Betulin derivatives containing a 1,2,3-triazole ring possess a wide spectrum of biological activities, including antiviral, anticancer, and antibacterial activity. A series of novel triazoles were prepared by the 1,3-dipolar cycloaddition reaction between the alkyne derivatives of betulin and organic azides. The chemical structures of the obtained compounds were defined by ¹H and ¹³C NMR, IR, and high-resolution mass spectrometry (HR-MS) analysis. The target triazoles were screened for their antiviral activity against DNA and RNA viruses. The cytotoxic activity of the obtained compounds 5a-k and 6a-h was determined using five human cancer cell lines (T47D, MCF-7, SNB-19, Colo-829, and C-32) by a WST-1 assay. The bistriazole 6b displayed a promising IC₅₀ value (0.05 μM) against the human ductal carcinoma T47D (500-fold higher potency than cisplatin). The microdilution method was applied for an evaluation of the antimicrobial activity of all of the compounds. The triazole 5e containing a 3'-deoxythymidine-5'-yl moiety exhibited antibacterial activity against two gram-negative bacteria vz. Klebsiellapneumoniae and Escherichia coli (minimal inhibitory concentration (MIC) range of 0.95-1.95 μM).

Self-Assembly with 2,6-Bis(1-(pyridin-4-ylmethyl)-1H-1,2,3-triazol-4-yl)pyridine: Silver(I) and Iron(II) Complexes

A new "click" ligand, 2,6-bis(1-(pyridin-4-ylmethyl)-1H-1,2,3-triazol-4-yl)pyridine (L) featuring a tridentate 2,6-bis(1,2,3-triazol-4-yl)pyridine (tripy) pocket and two pyridyl (py) units was synthesized in modest yield (42%) using the copper(I) catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The coordination chemistry of the ligand with silver(I) and iron(II) ions was examined using a battery of solution (¹H and DOSY (diffusion ordered spectroscopy) nuclear magnetic resonance (NMR), infrared and absorption spectroscopies, high-resolution electrospray ionization mass spectrometry (HR-ESI-MS)), and solid state (X-ray crystallography, elemental analysis) techniques. When treated with silver(I) ions, the ligand forms discrete [Ag(L)]⁺ (X-, where X- = BF₄-, NO₃- or SbF₆-) complexes in dimethyl sulfoxide (DMSO) solution but these complexes crystallize as coordination polymers. The addition of [Fe(H₂O)₆](BF₄)₂ to an acetonitrile solution of the ligand forms the expected monomeric octahedral [Fe(L)₂]2+ complex and treatment of the iron(II) complex with AgBF₄ generates a heterometallic linear coordination polymer.

Facile Fabrication of Ordered Component-Tunable Heterobimetallic Self-Assembly Nanosheet for Catalyzing "Click" Reaction

How to maximize the number of desirable active sites on the surface of the catalyst and minimize the number of sites promoting undesirable side reactions is currently an important research topic. In this study, a new way based on the synergism to achieve the successful fabrication of an ordered heterobimetallic self-assembled monolayer (denoted as BMSAM) with a controlled composition and an excellent orientation of metals in the monolayer was developed. BMSAM consisting of phenanthroline and Schiff-base groups was prepared, and its novel heterobimetallic (Cu and Pd) self-assembled monolayer anchored in silicon (denoted as Si-Fmp-Cu-Pd BMSAM) with a controlled composition and a fixed position was fabricated and characterized by UV, cyclic voltammetry, Raman, X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and water-drop contact angle (WDCA) analyses. The effects of Si-Fmp-Cu-Pd BMSAM on its catalytic properties were also systematically investigated using "click" reaction as a template by WDCA, XPS, SEM, XRD, ICP-AES and in situ Fourier transform infrared analyses in a heterogeneous system. The results showed that the excellent catalytic characteristic could be attributed to the partial (ordered or proper distance) isolation of active sites displaying high densities of specific atomic ensembles. The catalytic reaction mechanism of the click reaction interpreted that the catalytic process mainly occurred on the surface of the monolayer, internal active site (Pd) and rationalized that the Cu(I) species and Pd(0) reduced from the Cu(II) and Pd(II) catalyst were active species, which had a proper distance between two different metals. The cuprate-triazole intermediate and the palladium intermediate, whose production is the key step, should lie in a proper position between the copper and active palladium sites, with which the reaction rate of transmetalation would be improved to increase the amount of the undesired Sonogashira coupling product.